docs/getting_started/tfm_getting_started.rst

####################################
Select and set up build environments
####################################

TF-M officially supports a limited set of build environments and setups. In
this context, official support means that the environments listed below
are actively used by team members and active developers, hence users should
be able to recreate the same configurations by following the instructions
described below. In case of problems, the TF-M team provides support
only for these environments, but building in other environments can still be
possible.

The following environments are supported:

.. tabs::

    .. group-tab:: Linux

        1. version supported:

           Ubuntu 18.04 x64+

        2. install dependencies:

        .. code-block:: bash

            sudo apt-get install -y git curl wget build-essential libssl-dev python3 \
            python3-pip cmake make

        3. verify cmake version:

        .. code-block:: bash

            cmake --version

        .. note::

            Please download cmake 3.15 or later version from https://cmake.org/download/.

        4. add CMake path into environment:

        .. code-block:: bash

            export PATH=<CMake path>/bin:$PATH

    .. group-tab:: Windows

        1. version supported:

           Windows 10 x64

        2. install dependecies:

        - Git client latest version (https://git-scm.com/download/win)
        - CMake (`native Windows version <https://cmake.org/download/>`__)
        - GNU make (http://gnuwin32.sourceforge.net/packages/make.htm)
        - Python3 `(native Windows version) <https://www.python.org/downloads/>`__ and
          the pip package manager (from Python 3.4 it's included)

        3. add CMake path into environment:

        .. code-block:: bash

            set PATH=<CMake_Path>\bin;$PATH

###########################
Install python dependencies
###########################

Clone the TF-M source code, and then install the TF-M's additional Python
dependencies.

.. tabs::

    .. group-tab:: Linux

        1. get the TF-M source code:

        .. code-block:: bash

            cd <base folder>
            git clone https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git

        2. TF-M's ``tools/requirements.txt`` file declares additional Python
           dependencies. Install them with ``pip3``:

        .. code-block:: bash

            pip3 install --upgrade pip
            cd trusted-firmware-m
            pip3 install -r tools/requirements.txt

    .. group-tab:: Windows

        1. get the TF-M source code:

        .. code-block:: bash

            cd <base folder>
            git clone https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git

        2. TF-M's ``tools/requirements.txt`` file declares additional Python
           dependencies. Install them with ``pip3``:

        .. code-block:: bash

            cd trusted-firmware-m
            pip3 install -r tools\requirements.txt

###################
Install a toolchain
###################

To compile TF-M code, at least one of the supported compiler toolchains have to
be available in the build environment. The currently supported compiler
versions are:

    - Arm Compiler v6.10.1+

      .. tabs::

          .. group-tab:: Linux

              - Download the standalone packages from `here <https://developer.arm.com/products/software-development-tools/compilers/arm-compiler/downloads/version-6>`__.
              - Add Arm Compiler into environment:

                .. code-block:: bash

                    export PATH=<ARM_CLANG_PATH>/sw/ARMCompiler6.10.1/bin:$PATH
                    export ARM_PRODUCT_PATH=<ARM_CLANG_PATH>/sw/mappings

          .. group-tab:: Windows

              - Download the standalone packages from `here <https://developer.arm.com/products/software-development-tools/compilers/arm-compiler/downloads/version-6>`__.
              - Add Arm Compiler into environment:

                .. code-block:: bash

                    set PATH=<ARM_CLANG_PATH>\sw\ARMCompiler6.10.1\bin;$PATH
                    set ARM_PRODUCT_PATH=<ARM_CLANG_PATH>\sw\mappings

    - GNU Arm compiler v7.3.1+

      .. tabs::

          .. group-tab:: Linux

              - Download the GNU Arm compiler from `here <https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads>`__.
              - Add GNU Arm into environment:

                .. code-block:: bash

                    export PATH=<GNU_ARM_PATH>/bin:$PATH

          .. group-tab:: Windows

              - Download the GNU Arm compiler from `here <https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads>`__.
              - Add GNU Arm into environment:

                .. code-block:: bash

                    export PATH=<GNU_ARM_PATH>\bin;$PATH

      .. note::

          GNU Arm compiler version *10-2020-q4-major* has an issue in CMSE
          support. The bug is reported in `here <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99157>`__.
          Select other GNU Arm compiler versions instead.

    - IAR Arm compiler v8.42.x, v8.50.x

      .. tabs::

          .. group-tab:: Linux

              - Download IAR build tools from `here <https://www.iar.com/iar-embedded-workbench/build-tools-for-linux/>`__.
              - Add IAR Arm compiler into environment:

                .. code-block:: bash

                    export PATH=<IAR_COMPILER_PATH>/bin:$PATH

          .. group-tab:: Windows

              - Download IAR build tools from `here <https://www.iar.com/iar-embedded-workbench/#!?architecture=Arm>`__.
              - Add IAR Arm compiler into environment:

                .. code-block:: bash

                    export PATH=<IAR_COMPILER_PATH>\bin;$PATH

#############################
Build AN521 regression sample
#############################

Here, we take building TF-M for AN521 platform with regression tests using GCC
as an example:

.. tabs::

    .. group-tab:: Linux

        .. code-block:: bash

            cd trusted-firmware-m
            cmake -S . -B cmake_build -DTFM_PLATFORM=arm/mps2/an521 -DTFM_TOOLCHAIN_FILE=toolchain_GNUARM.cmake -DCMAKE_BUILD_TYPE=Debug -DTEST_S=ON -DTEST_NS=ON
            cmake --build cmake_build -- install

        Alternately using traditional cmake syntax

        .. code-block:: bash

            cd trusted-firmware-m
            mkdir cmake_build
            cd cmake_build
            cmake .. -DTFM_PLATFORM=arm/mps2/an521 -DTFM_TOOLCHAIN_FILE=../toolchain_GNUARM.cmake -DTEST_S=ON -DTEST_NS=ON
            make install

    .. group-tab:: Windows

        .. code-block:: bash

            cd trusted-firmware-m
            cmake -G"Unix Makefiles" -S . -B cmake_build -DTFM_PLATFORM=arm/mps2/an521 -DTFM_TOOLCHAIN_FILE=toolchain_GNUARM.cmake -DCMAKE_BUILD_TYPE=Debug -DTEST_S=ON -DTEST_NS=ON
            cmake --build cmake_build -- install

        Alternately using traditional cmake syntax

        .. code-block:: bash

            cd trusted-firmware-m
            mkdir cmake_build
            cd cmake_build
            cmake -G"Unix Makefiles" .. -DTFM_PLATFORM=arm/mps2/an521 -DTFM_TOOLCHAIN_FILE=../toolchain_GNUARM.cmake -DTEST_S=ON -DTEST_NS=ON
            make install

###########################
Run AN521 regression sample
###########################

Run the sample code on SSE-200 Fast-Model, using FVP_MPS2_AEMv8M provided by
Arm Development Studio.

.. note::

    Arm Development Studio is not essential to develop TF-M, you can skip this
    section if don't want to try on Arm develop boards.

.. tabs::

    .. group-tab:: Linux

        1. install Arm Development Studio to get the fast-model.

           Download Arm Development Studio from `here <https://developer.arm.com/tools-and-software/embedded/arm-development-studio>`__.

        2. Add ``bl2.axf`` and ``tfm_s_ns_signed.bin`` to symbol files in Debug
           Configuration menu.

        .. code-block:: bash

            <DS_PATH>/sw/models/bin/FVP_MPS2_AEMv8M  \
            --parameter fvp_mps2.platform_type=2 \
            --parameter cpu0.baseline=0 \
            --parameter cpu0.INITVTOR_S=0x10000000 \
            --parameter cpu0.semihosting-enable=0 \
            --parameter fvp_mps2.DISABLE_GATING=0 \
            --parameter fvp_mps2.telnetterminal0.start_telnet=1 \
            --parameter fvp_mps2.telnetterminal1.start_telnet=0 \
            --parameter fvp_mps2.telnetterminal2.start_telnet=0 \
            --parameter fvp_mps2.telnetterminal0.quiet=0 \
            --parameter fvp_mps2.telnetterminal1.quiet=1 \
            --parameter fvp_mps2.telnetterminal2.quiet=1 \
            --application cpu0=<build_dir>/bin/bl2.axf \
            --data cpu0=<build_dir>/bin/tfm_s_ns_signed.bin@0x10080000

    .. group-tab:: Windows

        1. install Arm Development Studio to get the fast-model.

           Download Arm Development Studio from `here <https://developer.arm.com/tools-and-software/embedded/arm-development-studio>`__.

        2. Add ``bl2.axf`` and ``tfm_s_ns_signed.bin`` to symbol files in Debug
           Configuration menu.

        .. code-block:: bash

            <DS_PATH>\sw\models\bin\FVP_MPS2_AEMv8M  \
            --parameter fvp_mps2.platform_type=2 \
            --parameter cpu0.baseline=0 \
            --parameter cpu0.INITVTOR_S=0x10000000 \
            --parameter cpu0.semihosting-enable=0 \
            --parameter fvp_mps2.DISABLE_GATING=0 \
            --parameter fvp_mps2.telnetterminal0.start_telnet=1 \
            --parameter fvp_mps2.telnetterminal1.start_telnet=0 \
            --parameter fvp_mps2.telnetterminal2.start_telnet=0 \
            --parameter fvp_mps2.telnetterminal0.quiet=0 \
            --parameter fvp_mps2.telnetterminal1.quiet=1 \
            --parameter fvp_mps2.telnetterminal2.quiet=1 \
            --application cpu0=<build_dir>/bin/bl2.axf \
            --data cpu0=<build_dir>/bin/tfm_s_ns_signed.bin@0x10080000

After completing the procedure you should see the following messages on the
DAPLink UART (baud 115200 8n1)::

    [INF] Starting bootloader
    [INF] Image 0: magic=good, copy_done=0xff, image_ok=0xff
    [INF] Scratch: magic=bad, copy_done=0x5, image_ok=0x9
    [INF] Boot source: primary slot
    [INF] Swap type: none
    [INF] Bootloader chainload address offset: 0x20000
    [INF] Jumping to the first image slot
    [Sec Thread] Secure image initializing!

    #### Execute test suites for the protected storage service ####
    Running Test Suite PS secure interface tests (TFM_PS_TEST_2XXX)...
    > Executing 'TFM_PS_TEST_2001'
      Description: 'Create interface'
      TEST PASSED!
    > Executing 'TFM_PS_TEST_2002'
      Description: 'Get handle interface (DEPRECATED)'
    This test is DEPRECATED and the test execution was SKIPPED
      TEST PASSED!
    > Executing 'TFM_PS_TEST_2003'
      Description: 'Get handle with null handle pointer (DEPRECATED)'
    This test is DEPRECATED and the test execution was SKIPPED
      TEST PASSED!
    > Executing 'TFM_PS_TEST_2004'
      Description: 'Get attributes interface'
      TEST PASSED!
    > Executing 'TFM_PS_TEST_2005'
      Description: 'Get attributes with null attributes struct pointer'
    ....

##########################
Tool & Dependency overview
##########################

To build the TF-M firmware the following tools are needed:

   - C compiler of supported toolchains
   - CMake version 3.15 or later
   - Git
   - gmake, aka GNU Make
   - Python v3.x
   - a set of python modules listed in ``tools/requiremtns.txt``

Dependency chain
----------------

.. uml::

   @startuml
    skinparam state {
      BackgroundColor #92AEE0
      FontColor black
      FontSize 16
      AttributeFontColor black
      AttributeFontSize 16
    }
    state fw as "Firmware" : TF-M binary
    state c_comp as "C Compiler" : C99
    state python as "Python" : v3.x

    fw --> c_comp
    fw --> CMake
    CMake --> gmake
    CMake --> Ninja
    fw --> cryptography
    fw --> pyasn1
    fw --> yaml
    fw --> jinja2
    fw --> cbor
    fw --> click
    fw --> imgtool
    c_comp --> GCC
    c_comp --> CLANG
    c_comp --> IAR
    cryptography --> python
    pyasn1 --> python
    yaml --> python
    jinja2 --> python
    cbor --> python
    click --> python
    imgtool --> python
   @enduml

##########
Next steps
##########

Here are some next steps for exploring TF-M:

    - Detailed :doc:`Build instructions </docs/technical_references/instructions/tfm_build_instruction>`.
    - :doc:`IAR Build instructions </docs/technical_references/instructions/tfm_build_instruction_iar>`.
    - Try other :doc:`Samples and Demos </docs/technical_references/instructions/run_tfm_examples_on_arm_platforms>`.
    - :doc:`Documentation generation </docs/technical_references/instructions/documentation_generation>`.

--------------

*Copyright (c) 2017-2021, Arm Limited. All rights reserved.*