| /* |
| * Copyright (c) 2013-2025, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <string.h> |
| |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <drivers/arm/cci.h> |
| #include <drivers/arm/ccn.h> |
| #include <drivers/arm/gicv2.h> |
| #include <drivers/arm/sp804_delay_timer.h> |
| #include <drivers/arm/smmu_v3.h> |
| #include <drivers/generic_delay_timer.h> |
| #include <fconf_hw_config_getter.h> |
| #include <lib/mmio.h> |
| #include <lib/smccc.h> |
| #include <lib/xlat_tables/xlat_tables_compat.h> |
| #include <platform_def.h> |
| #include <services/arm_arch_svc.h> |
| #include <services/rmm_core_manifest.h> |
| #if SPM_MM |
| #include <services/spm_mm_partition.h> |
| #endif |
| |
| #include <plat/arm/common/arm_config.h> |
| #include <plat/arm/common/plat_arm.h> |
| #include <plat/common/platform.h> |
| |
| #include "fvp_private.h" |
| |
| /* Defines for GIC Driver build time selection */ |
| #define FVP_GICV2 1 |
| #define FVP_GICV3 2 |
| |
| /* Defines for RMM Console */ |
| #define FVP_RMM_CONSOLE_BASE UL(0x1c0c0000) |
| #define FVP_RMM_CONSOLE_BAUD UL(115200) |
| #define FVP_RMM_CONSOLE_CLK_IN_HZ UL(14745600) |
| #define FVP_RMM_CONSOLE_NAME "pl011" |
| #define FVP_RMM_CONSOLE_COUNT UL(1) |
| |
| /* Defines for RMM PCIe ECAM */ |
| #define FVP_RMM_ECAM_BASE PCIE_EXP_BASE |
| #define FVP_RMM_ECAM_SEGMENT UL(0x0) |
| #define FVP_RMM_ECAM_BDF UL(0x0) |
| |
| /* Defines for RMM SMMUv3 */ |
| #define FVP_RMM_SMMU_BASE PLAT_FVP_SMMUV3_BASE |
| #define FVP_RMM_SMMU_COUNT UL(1) |
| |
| /******************************************************************************* |
| * arm_config holds the characteristics of the differences between the three FVP |
| * platforms (Base, A53_A57 & Foundation). It will be populated during cold boot |
| * at each boot stage by the primary before enabling the MMU (to allow |
| * interconnect configuration) & used thereafter. Each BL will have its own copy |
| * to allow independent operation. |
| ******************************************************************************/ |
| arm_config_t arm_config; |
| |
| #define MAP_DEVICE0 MAP_REGION_FLAT(DEVICE0_BASE, \ |
| DEVICE0_SIZE, \ |
| MT_DEVICE | MT_RW | EL3_PAS) |
| |
| #define MAP_DEVICE1 MAP_REGION_FLAT(DEVICE1_BASE, \ |
| DEVICE1_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #if FVP_GICR_REGION_PROTECTION |
| #define MAP_GICD_MEM MAP_REGION_FLAT(BASE_GICD_BASE, \ |
| BASE_GICD_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| /* Map all core's redistributor memory as read-only. After boots up, |
| * per-core map its redistributor memory as read-write */ |
| #define MAP_GICR_MEM MAP_REGION_FLAT(BASE_GICR_BASE, \ |
| (BASE_GICR_SIZE * PLATFORM_CORE_COUNT),\ |
| MT_DEVICE | MT_RO | MT_SECURE) |
| #endif /* FVP_GICR_REGION_PROTECTION */ |
| |
| /* |
| * Need to be mapped with write permissions in order to set a new non-volatile |
| * counter value. |
| */ |
| #define MAP_DEVICE2 MAP_REGION_FLAT(DEVICE2_BASE, \ |
| DEVICE2_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #if TRANSFER_LIST |
| #ifdef FW_NS_HANDOFF_BASE |
| #define MAP_FW_NS_HANDOFF \ |
| MAP_REGION_FLAT(FW_NS_HANDOFF_BASE, PLAT_ARM_FW_HANDOFF_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| #endif |
| #ifdef PLAT_ARM_EL3_FW_HANDOFF_BASE |
| #define MAP_EL3_FW_HANDOFF \ |
| MAP_REGION_FLAT(PLAT_ARM_EL3_FW_HANDOFF_BASE, \ |
| PLAT_ARM_FW_HANDOFF_SIZE, MT_MEMORY | MT_RW | EL3_PAS) |
| #endif |
| #endif |
| |
| /* |
| * Table of memory regions for various BL stages to map using the MMU. |
| * This doesn't include Trusted SRAM as setup_page_tables() already takes care |
| * of mapping it. |
| */ |
| #ifdef IMAGE_BL1 |
| const mmap_region_t plat_arm_mmap[] = { |
| ARM_MAP_SHARED_RAM, |
| V2M_MAP_FLASH0_RO, |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| MAP_DEVICE1, |
| #endif |
| #if TRUSTED_BOARD_BOOT |
| /* To access the Root of Trust Public Key registers. */ |
| MAP_DEVICE2, |
| /* Map DRAM to authenticate NS_BL2U image. */ |
| ARM_MAP_NS_DRAM1, |
| #endif |
| {0} |
| }; |
| #endif |
| #ifdef IMAGE_BL2 |
| const mmap_region_t plat_arm_mmap[] = { |
| ARM_MAP_SHARED_RAM, |
| V2M_MAP_FLASH0_RW, |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| MAP_DEVICE1, |
| #endif |
| ARM_MAP_NS_DRAM1, |
| #ifdef __aarch64__ |
| ARM_MAP_DRAM2, |
| #endif |
| /* |
| * Required to load HW_CONFIG, SPMC and SPs to trusted DRAM. |
| */ |
| ARM_MAP_TRUSTED_DRAM, |
| |
| /* |
| * Required to load Event Log in TZC secured memory |
| */ |
| #if MEASURED_BOOT && (defined(SPD_tspd) || defined(SPD_opteed) || \ |
| defined(SPD_spmd)) |
| ARM_MAP_EVENT_LOG_DRAM1, |
| #endif /* MEASURED_BOOT && (SPD_tspd || SPD_opteed || SPD_spmd) */ |
| |
| #if ENABLE_RME |
| ARM_MAP_RMM_DRAM, |
| ARM_MAP_GPT_L1_DRAM, |
| #endif /* ENABLE_RME */ |
| #ifdef SPD_tspd |
| ARM_MAP_TSP_SEC_MEM, |
| #endif |
| #if TRUSTED_BOARD_BOOT |
| /* To access the Root of Trust Public Key registers. */ |
| MAP_DEVICE2, |
| #endif /* TRUSTED_BOARD_BOOT */ |
| |
| #if CRYPTO_SUPPORT && !RESET_TO_BL2 |
| /* |
| * To access shared the Mbed TLS heap while booting the |
| * system with Crypto support |
| */ |
| ARM_MAP_BL1_RW, |
| #endif /* CRYPTO_SUPPORT && !RESET_TO_BL2 */ |
| #if SPM_MM || SPMC_AT_EL3 |
| ARM_SP_IMAGE_MMAP, |
| #endif |
| #if ARM_BL31_IN_DRAM |
| ARM_MAP_BL31_SEC_DRAM, |
| #endif |
| #ifdef SPD_opteed |
| ARM_MAP_OPTEE_CORE_MEM, |
| ARM_OPTEE_PAGEABLE_LOAD_MEM, |
| #endif |
| #ifdef MAP_EL3_FW_HANDOFF |
| MAP_EL3_FW_HANDOFF, |
| #endif |
| { 0 } |
| }; |
| #endif |
| #ifdef IMAGE_BL2U |
| const mmap_region_t plat_arm_mmap[] = { |
| MAP_DEVICE0, |
| V2M_MAP_IOFPGA, |
| {0} |
| }; |
| #endif |
| #ifdef IMAGE_BL31 |
| const mmap_region_t plat_arm_mmap[] = { |
| ARM_MAP_SHARED_RAM, |
| #if USE_DEBUGFS |
| /* Required by devfip, can be removed if devfip is not used */ |
| V2M_MAP_FLASH0_RW, |
| #endif /* USE_DEBUGFS */ |
| ARM_MAP_EL3_TZC_DRAM, |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| #if FVP_GICR_REGION_PROTECTION |
| MAP_GICD_MEM, |
| MAP_GICR_MEM, |
| #else |
| MAP_DEVICE1, |
| #endif /* FVP_GICR_REGION_PROTECTION */ |
| ARM_V2M_MAP_MEM_PROTECT, |
| #if SPM_MM |
| ARM_SPM_BUF_EL3_MMAP, |
| #endif |
| #if ENABLE_RME |
| ARM_MAP_GPT_L1_DRAM, |
| ARM_MAP_EL3_RMM_SHARED_MEM, |
| #endif |
| #ifdef MAP_FW_NS_HANDOFF |
| MAP_FW_NS_HANDOFF, |
| #endif |
| #if defined(MAP_EL3_FW_HANDOFF) && !RESET_TO_BL31 |
| MAP_EL3_FW_HANDOFF, |
| #endif |
| { 0 } |
| }; |
| |
| #if defined(IMAGE_BL31) && SPM_MM |
| const mmap_region_t plat_arm_secure_partition_mmap[] = { |
| V2M_MAP_IOFPGA_EL0, /* for the UART */ |
| V2M_MAP_SECURE_SYSTEMREG_EL0, /* for initializing flash */ |
| #if PSA_FWU_SUPPORT |
| V2M_MAP_FLASH0_RW_EL0, /* for firmware update service in standalone mm */ |
| #endif |
| V2M_MAP_FLASH1_RW_EL0, /* for secure variable service in standalone mm */ |
| MAP_REGION_FLAT(DEVICE0_BASE, |
| DEVICE0_SIZE, |
| MT_DEVICE | MT_RO | MT_SECURE | MT_USER), |
| ARM_SP_IMAGE_MMAP, |
| ARM_SP_IMAGE_NS_BUF_MMAP, |
| ARM_SP_IMAGE_RW_MMAP, |
| ARM_SPM_BUF_EL0_MMAP, |
| {0} |
| }; |
| #endif |
| #endif |
| #ifdef IMAGE_BL32 |
| const mmap_region_t plat_arm_mmap[] = { |
| #ifndef __aarch64__ |
| ARM_MAP_SHARED_RAM, |
| ARM_V2M_MAP_MEM_PROTECT, |
| #endif |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| MAP_DEVICE1, |
| {0} |
| }; |
| #endif |
| |
| #ifdef IMAGE_RMM |
| const mmap_region_t plat_arm_mmap[] = { |
| V2M_MAP_IOFPGA, |
| MAP_DEVICE0, |
| MAP_DEVICE1, |
| {0} |
| }; |
| #endif |
| |
| ARM_CASSERT_MMAP |
| |
| #if FVP_INTERCONNECT_DRIVER != FVP_CCN |
| static const int fvp_cci400_map[] = { |
| PLAT_FVP_CCI400_CLUS0_SL_PORT, |
| PLAT_FVP_CCI400_CLUS1_SL_PORT, |
| }; |
| |
| static const int fvp_cci5xx_map[] = { |
| PLAT_FVP_CCI5XX_CLUS0_SL_PORT, |
| PLAT_FVP_CCI5XX_CLUS1_SL_PORT, |
| }; |
| |
| static unsigned int get_interconnect_master(void) |
| { |
| unsigned int master; |
| u_register_t mpidr; |
| |
| mpidr = read_mpidr_el1(); |
| master = ((arm_config.flags & ARM_CONFIG_FVP_SHIFTED_AFF) != 0U) ? |
| MPIDR_AFFLVL2_VAL(mpidr) : MPIDR_AFFLVL1_VAL(mpidr); |
| |
| assert(master < FVP_CLUSTER_COUNT); |
| return master; |
| } |
| #endif |
| |
| #if defined(IMAGE_BL31) && SPM_MM |
| /* |
| * Boot information passed to a secure partition during initialisation. Linear |
| * indices in MP information will be filled at runtime. |
| */ |
| static spm_mm_mp_info_t sp_mp_info[] = { |
| [0] = {0x80000000, 0}, |
| [1] = {0x80000001, 0}, |
| [2] = {0x80000002, 0}, |
| [3] = {0x80000003, 0}, |
| [4] = {0x80000100, 0}, |
| [5] = {0x80000101, 0}, |
| [6] = {0x80000102, 0}, |
| [7] = {0x80000103, 0}, |
| }; |
| |
| const spm_mm_boot_info_t plat_arm_secure_partition_boot_info = { |
| .h.type = PARAM_SP_IMAGE_BOOT_INFO, |
| .h.version = VERSION_1, |
| .h.size = sizeof(spm_mm_boot_info_t), |
| .h.attr = 0, |
| .sp_mem_base = ARM_SP_IMAGE_BASE, |
| .sp_mem_limit = ARM_SP_IMAGE_LIMIT, |
| .sp_image_base = ARM_SP_IMAGE_BASE, |
| .sp_stack_base = PLAT_SP_IMAGE_STACK_BASE, |
| .sp_heap_base = ARM_SP_IMAGE_HEAP_BASE, |
| .sp_ns_comm_buf_base = PLAT_SP_IMAGE_NS_BUF_BASE, |
| .sp_shared_buf_base = PLAT_SPM_BUF_BASE, |
| .sp_image_size = ARM_SP_IMAGE_SIZE, |
| .sp_pcpu_stack_size = PLAT_SP_IMAGE_STACK_PCPU_SIZE, |
| .sp_heap_size = ARM_SP_IMAGE_HEAP_SIZE, |
| .sp_ns_comm_buf_size = PLAT_SP_IMAGE_NS_BUF_SIZE, |
| .sp_shared_buf_size = PLAT_SPM_BUF_SIZE, |
| .num_sp_mem_regions = ARM_SP_IMAGE_NUM_MEM_REGIONS, |
| .num_cpus = PLATFORM_CORE_COUNT, |
| .mp_info = &sp_mp_info[0], |
| }; |
| |
| const struct mmap_region *plat_get_secure_partition_mmap(void *cookie) |
| { |
| return plat_arm_secure_partition_mmap; |
| } |
| |
| const struct spm_mm_boot_info *plat_get_secure_partition_boot_info( |
| void *cookie) |
| { |
| return &plat_arm_secure_partition_boot_info; |
| } |
| #endif |
| |
| /******************************************************************************* |
| * A single boot loader stack is expected to work on both the Foundation FVP |
| * models and the two flavours of the Base FVP models (AEMv8 & Cortex). The |
| * SYS_ID register provides a mechanism for detecting the differences between |
| * these platforms. This information is stored in a per-BL array to allow the |
| * code to take the correct path.Per BL platform configuration. |
| ******************************************************************************/ |
| void __init fvp_config_setup(void) |
| { |
| unsigned int rev, hbi, bld, arch, sys_id; |
| |
| sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID); |
| rev = (sys_id >> V2M_SYS_ID_REV_SHIFT) & V2M_SYS_ID_REV_MASK; |
| hbi = (sys_id >> V2M_SYS_ID_HBI_SHIFT) & V2M_SYS_ID_HBI_MASK; |
| bld = (sys_id >> V2M_SYS_ID_BLD_SHIFT) & V2M_SYS_ID_BLD_MASK; |
| arch = (sys_id >> V2M_SYS_ID_ARCH_SHIFT) & V2M_SYS_ID_ARCH_MASK; |
| |
| if (arch != ARCH_MODEL) { |
| ERROR("This firmware is for FVP models\n"); |
| panic(); |
| } |
| |
| /* |
| * The build field in the SYS_ID tells which variant of the GIC |
| * memory is implemented by the model. |
| */ |
| switch (bld) { |
| case BLD_GIC_VE_MMAP: |
| ERROR("Legacy Versatile Express memory map for GIC peripheral" |
| " is not supported\n"); |
| panic(); |
| break; |
| case BLD_GIC_A53A57_MMAP: |
| break; |
| default: |
| ERROR("Unsupported board build %x\n", bld); |
| panic(); |
| } |
| |
| /* |
| * The hbi field in the SYS_ID is 0x020 for the Base FVP & 0x010 |
| * for the Foundation FVP. |
| */ |
| switch (hbi) { |
| case HBI_FOUNDATION_FVP: |
| arm_config.flags = 0; |
| |
| /* |
| * Check for supported revisions of Foundation FVP |
| * Allow future revisions to run but emit warning diagnostic |
| */ |
| switch (rev) { |
| case REV_FOUNDATION_FVP_V2_0: |
| case REV_FOUNDATION_FVP_V2_1: |
| case REV_FOUNDATION_FVP_v9_1: |
| case REV_FOUNDATION_FVP_v9_6: |
| break; |
| default: |
| WARN("Unrecognized Foundation FVP revision %x\n", rev); |
| break; |
| } |
| break; |
| case HBI_BASE_FVP: |
| arm_config.flags |= (ARM_CONFIG_BASE_MMAP | ARM_CONFIG_HAS_TZC); |
| |
| /* |
| * Check for supported revisions |
| * Allow future revisions to run but emit warning diagnostic |
| */ |
| switch (rev) { |
| case REV_BASE_FVP_V0: |
| arm_config.flags |= ARM_CONFIG_FVP_HAS_CCI400; |
| break; |
| case REV_BASE_FVP_REVC: |
| arm_config.flags |= (ARM_CONFIG_FVP_HAS_SMMUV3 | |
| ARM_CONFIG_FVP_HAS_CCI5XX); |
| break; |
| default: |
| WARN("Unrecognized Base FVP revision %x\n", rev); |
| break; |
| } |
| break; |
| default: |
| ERROR("Unsupported board HBI number 0x%x\n", hbi); |
| panic(); |
| } |
| |
| /* |
| * We assume that the presence of MT bit, and therefore shifted |
| * affinities, is uniform across the platform: either all CPUs, or no |
| * CPUs implement it. |
| */ |
| if ((read_mpidr_el1() & MPIDR_MT_MASK) != 0U) |
| arm_config.flags |= ARM_CONFIG_FVP_SHIFTED_AFF; |
| } |
| |
| |
| void __init fvp_interconnect_init(void) |
| { |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| if (ccn_get_part0_id(PLAT_ARM_CCN_BASE) != CCN_502_PART0_ID) { |
| ERROR("Unrecognized CCN variant detected. Only CCN-502 is supported"); |
| panic(); |
| } |
| |
| plat_arm_interconnect_init(); |
| #else |
| uintptr_t cci_base = 0U; |
| const int *cci_map = NULL; |
| unsigned int map_size = 0U; |
| |
| /* Initialize the right interconnect */ |
| if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI5XX) != 0U) { |
| cci_base = PLAT_FVP_CCI5XX_BASE; |
| cci_map = fvp_cci5xx_map; |
| map_size = ARRAY_SIZE(fvp_cci5xx_map); |
| } else if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI400) != 0U) { |
| cci_base = PLAT_FVP_CCI400_BASE; |
| cci_map = fvp_cci400_map; |
| map_size = ARRAY_SIZE(fvp_cci400_map); |
| } else { |
| return; |
| } |
| |
| assert(cci_base != 0U); |
| assert(cci_map != NULL); |
| cci_init(cci_base, cci_map, map_size); |
| #endif |
| } |
| |
| void fvp_interconnect_enable(void) |
| { |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| plat_arm_interconnect_enter_coherency(); |
| #else |
| unsigned int master; |
| |
| if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 | |
| ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) { |
| master = get_interconnect_master(); |
| cci_enable_snoop_dvm_reqs(master); |
| } |
| #endif |
| } |
| |
| void fvp_interconnect_disable(void) |
| { |
| #if FVP_INTERCONNECT_DRIVER == FVP_CCN |
| plat_arm_interconnect_exit_coherency(); |
| #else |
| unsigned int master; |
| |
| if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 | |
| ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) { |
| master = get_interconnect_master(); |
| cci_disable_snoop_dvm_reqs(master); |
| } |
| #endif |
| } |
| |
| #if CRYPTO_SUPPORT |
| int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size) |
| { |
| assert(heap_addr != NULL); |
| assert(heap_size != NULL); |
| |
| return arm_get_mbedtls_heap(heap_addr, heap_size); |
| } |
| #endif /* CRYPTO_SUPPORT */ |
| |
| void fvp_timer_init(void) |
| { |
| #if USE_SP804_TIMER |
| /* Enable the clock override for SP804 timer 0, which means that no |
| * clock dividers are applied and the raw (35MHz) clock will be used. |
| */ |
| mmio_write_32(V2M_SP810_BASE, FVP_SP810_CTRL_TIM0_OV); |
| |
| /* Initialize delay timer driver using SP804 dual timer 0 */ |
| sp804_timer_init(V2M_SP804_TIMER0_BASE, |
| SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV); |
| #else |
| generic_delay_timer_init(); |
| |
| /* Enable System level generic timer */ |
| mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF, |
| CNTCR_FCREQ(0U) | CNTCR_EN); |
| #endif /* USE_SP804_TIMER */ |
| } |
| |
| /***************************************************************************** |
| * plat_is_smccc_feature_available() - This function checks whether SMCCC |
| * feature is availabile for platform. |
| * @fid: SMCCC function id |
| * |
| * Return SMC_ARCH_CALL_SUCCESS if SMCCC feature is available and |
| * SMC_ARCH_CALL_NOT_SUPPORTED otherwise. |
| *****************************************************************************/ |
| int32_t plat_is_smccc_feature_available(u_register_t fid) |
| { |
| switch (fid) { |
| case SMCCC_ARCH_SOC_ID: |
| return SMC_ARCH_CALL_SUCCESS; |
| default: |
| return SMC_ARCH_CALL_NOT_SUPPORTED; |
| } |
| } |
| |
| /* Get SOC version */ |
| int32_t plat_get_soc_version(void) |
| { |
| return (int32_t) |
| (SOC_ID_SET_JEP_106(ARM_SOC_CONTINUATION_CODE, |
| ARM_SOC_IDENTIFICATION_CODE) | |
| (FVP_SOC_ID & SOC_ID_IMPL_DEF_MASK)); |
| } |
| |
| /* Get SOC revision */ |
| int32_t plat_get_soc_revision(void) |
| { |
| unsigned int sys_id; |
| |
| sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID); |
| return (int32_t)(((sys_id >> V2M_SYS_ID_REV_SHIFT) & |
| V2M_SYS_ID_REV_MASK) & SOC_ID_REV_MASK); |
| } |
| |
| #if ENABLE_RME |
| |
| /* BDF mappings for RP0 RC0 */ |
| const struct bdf_mapping_info rc0rp0_bdf_data[] = { |
| /* BDF0 */ |
| {0U, /* mapping_base */ |
| 0x8000U, /* mapping_top */ |
| 0U, /* mapping_off */ |
| 0U /* smmu_idx */ |
| } |
| }; |
| |
| /* Root ports for RC0 */ |
| const struct root_port_info rc0rp_data[] = { |
| /* RP0 */ |
| {0U, /* root_port_id */ |
| 0U, /* padding */ |
| ARRAY_SIZE(rc0rp0_bdf_data), /* num_bdf_mappings */ |
| (struct bdf_mapping_info *)rc0rp0_bdf_data /* bdf_mappings */ |
| } |
| }; |
| |
| /* Root complexes */ |
| const struct root_complex_info rc_data[] = { |
| /* RC0 */ |
| {PCIE_EXP_BASE, /* ecam_base */ |
| 0U, /* segment */ |
| {0U, 0U, 0U}, /* padding */ |
| ARRAY_SIZE(rc0rp_data), /* num_root_ports */ |
| (struct root_port_info *)rc0rp_data /* root_ports */ |
| } |
| }; |
| |
| /* Number of PCIe Root Complexes */ |
| #define FVP_RMM_RC_COUNT ARRAY_SIZE(rc_data) |
| |
| /* |
| * Get a pointer to the RMM-EL3 Shared buffer and return it |
| * through the pointer passed as parameter. |
| * |
| * This function returns the size of the shared buffer. |
| */ |
| size_t plat_rmmd_get_el3_rmm_shared_mem(uintptr_t *shared) |
| { |
| *shared = (uintptr_t)RMM_SHARED_BASE; |
| |
| return (size_t)RMM_SHARED_SIZE; |
| } |
| |
| /* |
| * Calculate checksum of 64-bit words @buffer with @size length |
| */ |
| static uint64_t checksum_calc(uint64_t *buffer, size_t size) |
| { |
| uint64_t sum = 0UL; |
| |
| assert(((uintptr_t)buffer & (sizeof(uint64_t) - 1UL)) == 0UL); |
| assert((size & (sizeof(uint64_t) - 1UL)) == 0UL); |
| |
| for (unsigned long i = 0UL; i < (size / sizeof(uint64_t)); i++) { |
| sum += buffer[i]; |
| } |
| |
| return sum; |
| } |
| /* |
| * Boot Manifest v0.5 structure illustration, with two DRAM banks, |
| * a single console and one device memory with two PCIe device |
| * non-coherent address ranges. |
| * |
| * +--------------------------------------------------+ |
| * | offset | field | comment | |
| * +--------+--------------------+--------------------+ |
| * | 0 | version | 0x00000005 | |
| * +--------+--------------------+--------------------+ |
| * | 4 | padding | 0x00000000 | |
| * +--------+--------------------+--------------------+ |
| * | 8 | plat_data | NULL | |
| * +--------+--------------------+--------------------+ |
| * | 16 | num_banks | | |
| * +--------+--------------------+ | |
| * | 24 | banks | plat_dram +--+ |
| * +--------+--------------------+ | | |
| * | 32 | checksum | | | |
| * +--------+--------------------+--------------------+ | |
| * | 40 | num_consoles | | | |
| * +--------+--------------------+ | | |
| * | 48 | consoles | plat_console +--|--+ |
| * +--------+--------------------+ | | | |
| * | 56 | checksum | | | | |
| * +--------+--------------------+--------------------+ | | |
| * | 64 | num_banks | | | | |
| * +--------+--------------------+ | | | |
| * | 72 | banks | plat_ncoh_region +--|--|--+ |
| * +--------+--------------------+ | | | | |
| * | 80 | checksum | | | | | |
| * +--------+--------------------+--------------------+ | | | |
| * | 88 | num_banks | | | | | |
| * +--------+--------------------+ | | | | |
| * | 96 | banks | plat_coh_region | | | | |
| * +--------+--------------------+ | | | | |
| * | 104 | checksum | | | | | |
| * +--------+--------------------+--------------------+ | | | |
| * | 112 | num_smmus | | | | | |
| * +--------+--------------------+ | | | | |
| * | 120 | smmus | plat_smmu +--|--|--|--+ |
| * +--------+--------------------+ | | | | | |
| * | 128 | checksum | | | | | | |
| * +--------+--------------------+--------------------+ | | | | |
| * | 136 | num_root_complex | | | | | | |
| * +--------+--------------------+ | | | | | |
| * | 144 | rc_info_version | | | | | | |
| * +--------+--------------------+ | | | | | |
| * | 148 | padding | plat_root_complex +--|--|--|--|--+ |
| * +--------+--------------------+ | | | | | | |
| * | 152 | root_complex | | | | | | | |
| * +--------+--------------------+ | | | | | | |
| * | 160 | checksum | | | | | | | |
| * +--------+--------------------+--------------------+<-+ | | | | |
| * | 168 | base 0 | | | | | | |
| * +--------+--------------------+ mem_bank[0] | | | | | |
| * | 176 | size 0 | | | | | | |
| * +--------+--------------------+--------------------+ | | | | |
| * | 184 | base 1 | | | | | | |
| * +--------+--------------------+ mem_bank[1] | | | | | |
| * | 192 | size 1 | | | | | | |
| * +--------+--------------------+--------------------+<----+ | | | |
| * | 200 | base | | | | | |
| * +--------+--------------------+ | | | | |
| * | 208 | map_pages | | | | | |
| * +--------+--------------------+ | | | | |
| * | 216 | name | | | | | |
| * +--------+--------------------+ consoles[0] | | | | |
| * | 224 | clk_in_hz | | | | | |
| * +--------+--------------------+ | | | | |
| * | 232 | baud_rate | | | | | |
| * +--------+--------------------+ | | | | |
| * | 240 | flags | | | | | |
| * +--------+--------------------+--------------------+<-------+ | | |
| * | 248 | base 0 | | | | |
| * +--------+--------------------+ ncoh_region[0] | | | |
| * | 256 | size 0 | | | | |
| * +--------+--------------------+--------------------+ | | |
| * | 264 | base 1 | | | | |
| * +--------+--------------------+ ncoh_region[1] | | | |
| * | 272 | size 1 | | | | |
| * +--------+--------------------+--------------------+<----------+ | |
| * | 280 | smmu_base | | | |
| * +--------+--------------------+ smmus[0] | | |
| * | 288 | smmu_r_base | | | |
| * +--------+--------------------+--------------------+<-------------+ |
| * | 296 | ecam_base | | |
| * +--------+--------------------+ | |
| * | 304 | segment | | |
| * +--------+--------------------+ | |
| * | 305 | padding | root_complex[0] +--+ |
| * +--------+--------------------+ | | |
| * | 308 | num_root_ports | | | |
| * +--------+--------------------+ | | |
| * | 312 | root_ports | | | |
| * +--------+--------------------+--------------------+<-+ |
| * | 320 | root_port_id | | |
| * +--------+--------------------+ | |
| * | 322 | padding | | |
| * +--------+--------------------+ root_ports[0] +--+ |
| * | 324 | num_bdf_mappings | | | |
| * +--------+--------------------+ | | |
| * | 328 | bdf_mappings | | | |
| * +--------+--------------------+--------------------+<-+ |
| * | 336 | mapping_base | | |
| * +--------+--------------------+ | |
| * | 338 | mapping_top | | |
| * +--------+--------------------+ bdf_mappings[0] | |
| * | 340 | mapping_off | | |
| * +--------+--------------------+ | |
| * | 342 | smmu_idx | | |
| * +--------+--------------------+--------------------+ |
| */ |
| int plat_rmmd_load_manifest(struct rmm_manifest *manifest) |
| { |
| uint64_t checksum, num_banks, num_consoles; |
| uint64_t num_ncoh_regions, num_coh_regions; |
| uint64_t num_smmus, num_root_complex; |
| unsigned int num_root_ports, num_bdf_mappings; |
| uint32_t o_realm; |
| struct memory_bank *bank_ptr, *ncoh_region_ptr, *coh_region_ptr; |
| struct console_info *console_ptr; |
| struct smmu_info *smmu_ptr; |
| struct root_complex_info *root_complex_ptr, *rc_ptr; |
| struct root_port_info *root_port_ptr, *rp_ptr; |
| struct bdf_mapping_info *bdf_mapping_ptr, *bdf_ptr; |
| |
| assert(manifest != NULL); |
| |
| /* Get number of DRAM banks */ |
| num_banks = FCONF_GET_PROPERTY(hw_config, dram_layout, num_banks); |
| assert(num_banks <= ARM_DRAM_NUM_BANKS); |
| |
| /* Set number of consoles */ |
| num_consoles = FVP_RMM_CONSOLE_COUNT; |
| |
| /* Set number of device non-coherent address ranges based on DT */ |
| num_ncoh_regions = FCONF_GET_PROPERTY(hw_config, pci_props, num_ncoh_regions); |
| |
| /* Set number of SMMUs */ |
| num_smmus = FVP_RMM_SMMU_COUNT; |
| |
| /* Set number of PCIe root complexes */ |
| num_root_complex = FVP_RMM_RC_COUNT; |
| |
| /* Calculate and set number of all PCIe root ports and BDF mappings */ |
| num_root_ports = 0U; |
| num_bdf_mappings = 0U; |
| |
| /* Scan all root complex entries */ |
| for (unsigned long i = 0UL; i < num_root_complex; i++) { |
| num_root_ports += rc_data[i].num_root_ports; |
| |
| /* Scan all root ports entries in root complex */ |
| for (unsigned int j = 0U; j < rc_data[i].num_root_ports; j++) { |
| num_bdf_mappings += rc_data[i].root_ports[j].num_bdf_mappings; |
| } |
| } |
| |
| manifest->version = RMMD_MANIFEST_VERSION; |
| manifest->padding = 0U; /* RES0 */ |
| manifest->plat_data = 0UL; |
| manifest->plat_dram.num_banks = num_banks; |
| manifest->plat_console.num_consoles = num_consoles; |
| manifest->plat_ncoh_region.num_banks = num_ncoh_regions; |
| manifest->plat_smmu.num_smmus = num_smmus; |
| manifest->plat_root_complex.num_root_complex = num_root_complex; |
| manifest->plat_root_complex.rc_info_version = PCIE_RC_INFO_VERSION; |
| manifest->plat_root_complex.padding = 0U; /* RES0 */ |
| |
| /* FVP does not support device coherent address ranges */ |
| num_coh_regions = 0UL; |
| manifest->plat_coh_region.num_banks = num_coh_regions; |
| manifest->plat_coh_region.banks = NULL; |
| manifest->plat_coh_region.checksum = 0UL; |
| |
| bank_ptr = (struct memory_bank *) |
| (((uintptr_t)manifest) + sizeof(struct rmm_manifest)); |
| console_ptr = (struct console_info *) |
| ((uintptr_t)bank_ptr + (num_banks * |
| sizeof(struct memory_bank))); |
| ncoh_region_ptr = (struct memory_bank *) |
| ((uintptr_t)console_ptr + (num_consoles * |
| sizeof(struct console_info))); |
| coh_region_ptr = (struct memory_bank *) |
| ((uintptr_t)ncoh_region_ptr + (num_ncoh_regions * |
| sizeof(struct memory_bank))); |
| smmu_ptr = (struct smmu_info *) |
| ((uintptr_t)coh_region_ptr + (num_coh_regions * |
| sizeof(struct memory_bank))); |
| root_complex_ptr = (struct root_complex_info *) |
| ((uintptr_t)smmu_ptr + (num_smmus * |
| sizeof(struct smmu_info))); |
| root_port_ptr = (struct root_port_info *) |
| ((uintptr_t)root_complex_ptr + (num_root_complex * |
| sizeof(struct root_complex_info))); |
| bdf_mapping_ptr = (struct bdf_mapping_info *) |
| ((uintptr_t)root_port_ptr + (num_root_ports * |
| sizeof(struct root_port_info))); |
| |
| manifest->plat_dram.banks = bank_ptr; |
| manifest->plat_console.consoles = console_ptr; |
| manifest->plat_ncoh_region.banks = ncoh_region_ptr; |
| manifest->plat_smmu.smmus = smmu_ptr; |
| manifest->plat_root_complex.root_complex = root_complex_ptr; |
| |
| /* Ensure the manifest is not larger than the shared buffer */ |
| assert((sizeof(struct rmm_manifest) + |
| (sizeof(struct memory_bank) * |
| manifest->plat_dram.num_banks) + |
| (sizeof(struct console_info) * |
| manifest->plat_console.num_consoles) + |
| (sizeof(struct memory_bank) * |
| manifest->plat_ncoh_region.num_banks) + |
| (sizeof(struct memory_bank) * |
| manifest->plat_coh_region.num_banks) + |
| (sizeof(struct smmu_info) * |
| manifest->plat_smmu.num_smmus) + |
| (sizeof(struct root_complex_info) * |
| manifest->plat_root_complex.num_root_complex) + |
| (sizeof(struct root_port_info) * num_root_ports) + |
| (sizeof(struct bdf_mapping_info) * num_bdf_mappings)) |
| <= ARM_EL3_RMM_SHARED_SIZE); |
| |
| /* Calculate checksum of plat_dram structure */ |
| checksum = num_banks + (uint64_t)bank_ptr; |
| |
| /* Store FVP DRAM banks data in Boot Manifest */ |
| for (unsigned long i = 0UL; i < num_banks; i++) { |
| bank_ptr[i].base = FCONF_GET_PROPERTY(hw_config, dram_layout, dram_bank[i].base); |
| bank_ptr[i].size = FCONF_GET_PROPERTY(hw_config, dram_layout, dram_bank[i].size); |
| } |
| |
| /* Update checksum */ |
| checksum += checksum_calc((uint64_t *)bank_ptr, sizeof(struct memory_bank) * num_banks); |
| |
| /* Checksum must be 0 */ |
| manifest->plat_dram.checksum = ~checksum + 1UL; |
| |
| /* Calculate the checksum of plat_consoles structure */ |
| checksum = num_consoles + (uint64_t)console_ptr; |
| |
| /* Zero out the console info struct */ |
| (void)memset((void *)console_ptr, '\0', |
| sizeof(struct console_info) * num_consoles); |
| |
| console_ptr[0].base = FVP_RMM_CONSOLE_BASE; |
| console_ptr[0].map_pages = 1UL; |
| console_ptr[0].clk_in_hz = FVP_RMM_CONSOLE_CLK_IN_HZ; |
| console_ptr[0].baud_rate = FVP_RMM_CONSOLE_BAUD; |
| |
| (void)strlcpy(console_ptr[0].name, FVP_RMM_CONSOLE_NAME, |
| RMM_CONSOLE_MAX_NAME_LEN - 1UL); |
| |
| /* Update checksum */ |
| checksum += checksum_calc((uint64_t *)console_ptr, |
| sizeof(struct console_info) * num_consoles); |
| /* Checksum must be 0 */ |
| manifest->plat_console.checksum = ~checksum + 1UL; |
| |
| /* |
| * Calculate the checksum of device non-coherent address ranges |
| * info structure |
| */ |
| checksum = num_ncoh_regions + (uint64_t)ncoh_region_ptr; |
| |
| /* Zero out the PCIe region info struct */ |
| (void)memset((void *)ncoh_region_ptr, 0, |
| sizeof(struct memory_bank) * num_ncoh_regions); |
| |
| for (unsigned long i = 0UL; i < num_ncoh_regions; i++) { |
| ncoh_region_ptr[i].base = |
| FCONF_GET_PROPERTY(hw_config, pci_props, ncoh_regions[i].base); |
| ncoh_region_ptr[i].size = |
| FCONF_GET_PROPERTY(hw_config, pci_props, ncoh_regions[i].size); |
| } |
| |
| /* Update checksum */ |
| checksum += checksum_calc((uint64_t *)ncoh_region_ptr, |
| sizeof(struct memory_bank) * num_ncoh_regions); |
| |
| /* Checksum must be 0 */ |
| manifest->plat_ncoh_region.checksum = ~checksum + 1UL; |
| |
| /* Calculate the checksum of the plat_smmu structure */ |
| checksum = num_smmus + (uint64_t)smmu_ptr; |
| |
| smmu_ptr[0].smmu_base = FVP_RMM_SMMU_BASE; |
| |
| /* Read SMMU_ROOT_IDR0.BA_REALM[31:22] register field */ |
| o_realm = mmio_read_32(FVP_RMM_SMMU_BASE + SMMU_ROOT_IDR0) & |
| SMMU_ROOT_IDR0_BA_REALM_MASK; |
| /* |
| * Calculate the base address offset of Realm Register Page 0. |
| * O_REALM = 0x20000 + (BA_REALM * 0x10000) |
| * SMMU_REALM_BASE = SMMU_PAGE_0_BASE + O_REALM |
| */ |
| o_realm = 0x20000 + (o_realm >> (SMMU_ROOT_IDR0_BA_REALM_SHIFT - 16U)); |
| |
| smmu_ptr[0].smmu_r_base = FVP_RMM_SMMU_BASE + o_realm; |
| |
| /* Update checksum */ |
| checksum += checksum_calc((uint64_t *)smmu_ptr, |
| sizeof(struct smmu_info) * num_smmus); |
| /* Checksum must be 0 */ |
| manifest->plat_smmu.checksum = ~checksum + 1UL; |
| |
| /* Calculate the checksum of the plat_root_complex structure */ |
| checksum = num_root_complex + (uint64_t)root_complex_ptr; |
| |
| /* Zero out PCIe root complex info structures */ |
| (void)memset((void *)root_complex_ptr, 0, |
| sizeof(struct root_complex_info) * num_root_complex); |
| |
| /* Set pointers for data in manifest */ |
| rc_ptr = root_complex_ptr; |
| rp_ptr = root_port_ptr; |
| bdf_ptr = bdf_mapping_ptr; |
| |
| /* Fill PCIe root complex info structures */ |
| for (unsigned long i = 0U; i < num_root_complex; i++) { |
| const struct root_complex_info *rc_info = &rc_data[i]; |
| const struct root_port_info *rp_info = rc_info->root_ports; |
| |
| /* Copy root complex data, except root_ports pointer */ |
| (void)memcpy((void *)rc_ptr, (void *)rc_info, |
| sizeof(struct root_complex_info) - sizeof(struct root_port_info *)); |
| |
| /* Set root_ports for root complex */ |
| rc_ptr->root_ports = rp_ptr; |
| |
| /* Scan root ports */ |
| for (unsigned int j = 0U; j < rc_ptr->num_root_ports; j++) { |
| const struct bdf_mapping_info *bdf_info = rp_info->bdf_mappings; |
| |
| /* Copy root port data, except bdf_mappings pointer */ |
| (void)memcpy((void *)rp_ptr, (void *)rp_info, |
| sizeof(struct root_port_info) - sizeof(struct bdf_mapping_info *)); |
| |
| /* Set bdf_mappings for root port */ |
| rp_ptr->bdf_mappings = bdf_ptr; |
| |
| /* Copy all BDF mappings for root port */ |
| (void)memcpy((void *)bdf_ptr, (void *)bdf_info, |
| sizeof(struct bdf_mapping_info) * rp_ptr->num_bdf_mappings); |
| |
| bdf_ptr += rp_ptr->num_bdf_mappings; |
| rp_ptr++; |
| rp_info++; |
| } |
| rc_ptr++; |
| } |
| |
| /* Check that all data are written in manifest */ |
| assert(rc_ptr == (root_complex_ptr + num_root_complex)); |
| assert(rp_ptr == (root_port_ptr + num_root_ports)); |
| assert(bdf_ptr == (bdf_mapping_ptr + num_bdf_mappings)); |
| |
| /* Update checksum for all PCIe data */ |
| checksum += checksum_calc((uint64_t *)root_complex_ptr, |
| (uintptr_t)bdf_ptr - (uintptr_t)root_complex_ptr); |
| |
| /* Checksum must be 0 */ |
| manifest->plat_root_complex.checksum = ~checksum + 1UL; |
| |
| return 0; |
| } |
| |
| /* |
| * Update encryption key associated with @mecid. |
| */ |
| int plat_rmmd_mecid_key_update(uint16_t mecid) |
| { |
| /* |
| * FVP does not provide an interface to change the encryption key associated |
| * with MECID. Hence always return success. |
| */ |
| return 0; |
| } |
| #endif /* ENABLE_RME */ |