Merge remote-tracking branch 'public/pr/1955' into iotssl-165-dtls-hs-fragmentation-new
* public/pr/1955:
Adapt ChangeLog
Fix overly strict bounds check in ssl_parse_certificate_request()
diff --git a/ChangeLog b/ChangeLog
index f505b38..bab69f6 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -2,6 +2,9 @@
= mbed TLS x.x.x branch released xxxx-xx-xx
+Features
+ * Add support for fragmentation of outoing DTLS handshake messages.
+
Bugfix
* Fixes an issue with MBEDTLS_CHACHAPOLY_C which would not compile if
MBEDTLS_ARC4_C and MBEDTLS_CIPHER_NULL_CIPHER weren't also defined. #1890
@@ -10,6 +13,11 @@
* Add ecc extensions only if an ecc based ciphersuite is used.
This improves compliance to RFC 4492, and as a result, solves
interoperability issues with BouncyCastle. Raised by milenamil in #1157.
+ * Fix potential use-after-free in mbedtls_ssl_get_max_frag_len()
+ and mbedtls_ssl_get_record_expansion() after a session reset. Fixes #1941.
+ * Fix a miscalculation of the maximum record expansion in
+ mbedtls_ssl_get_record_expansion() in case of ChachaPoly ciphersuites,
+ or CBC ciphersuites in (D)TLS versions 1.1 or higher. Fixes #1913, #1914.
* Fix overly strict bounds check in ssl_parse_certificate_request()
which could lead to valid CertificateRequest messages being rejected.
Fixes #1954.
@@ -22,6 +30,9 @@
* Improve compatibility with some alternative CCM implementations by using
CCM test vectors from RAM.
+INTERNAL NOTE: need to bump soversion of libmbedtls:
+- added new member 'mtu' to public 'mbedtls_ssl_conf' structure
+
= mbed TLS 2.12.0 branch released 2018-07-25
Security
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index 2d511a8..a3b514c 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -958,6 +958,10 @@
unsigned int dhm_min_bitlen; /*!< min. bit length of the DHM prime */
#endif
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+ uint16_t mtu; /*!< path mtu, used to fragment outoing messages */
+#endif
+
unsigned char max_major_ver; /*!< max. major version used */
unsigned char max_minor_ver; /*!< max. minor version used */
unsigned char min_major_ver; /*!< min. major version used */
@@ -2423,6 +2427,35 @@
char cert_req_ca_list );
#endif /* MBEDTLS_SSL_SRV_C */
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+/**
+ * \brief Set the Maximum Tranport Unit (MTU).
+ * Special value: 0 means unset (no limit).
+ * This represents the maximum size of a datagram payload
+ * handled by the transport layer (usually UDP) as determined
+ * by the network link and stack. In practice, this controls
+ * the maximum size datagram the DTLS layer will pass to the
+ * \c f_send() callback set using \c mbedtls_ssl_set_bio().
+ *
+ * \note This only controls the size of the packet we send.
+ * Client-side, you can request the server to use smaller
+ * records with \c mbedtls_conf_max_frag_len().
+ *
+ * \note If both a MTU and a maximum fragment length have been
+ * configured (or negotiated with the peer), the lower limit
+ * is used.
+ *
+ * \note Values larger than \c MBEDTLS_SSL_OUT_CONTENT_LEN have no
+ * effect. This can only be used to decrease the maximum size
+ * of datagrams sent. Values lower than record layer expansion
+ * are ignored.
+ *
+ * \param conf SSL configuration
+ * \param mtu Value of the path MTU in bytes
+ */
+void mbedtls_ssl_conf_mtu( mbedtls_ssl_config *conf, uint16_t mtu );
+#endif /* MBEDTLS_SSL_PROTO_DTLS */
+
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
/**
* \brief Set the maximum fragment length to emit and/or negotiate
@@ -2433,6 +2466,18 @@
* (Client: set maximum fragment length to emit *and*
* negotiate with the server during handshake)
*
+ * \note With TLS, this currently only affects ApplicationData (sent
+ * with \c mbedtls_ssl_read()), not handshake messages.
+ * With DTLS, this affects both ApplicationData and handshake.
+ *
+ * \note This sets the maximum length for a record's payload,
+ * excluding record overhead that will be added to it, see
+ * \c mbedtls_ssl_get_record_expansion().
+ *
+ * \note For DTLS, it is also possible to set a limit for the total
+ * size of daragrams passed to the transport layer, including
+ * record overhead, see \c mbedtls_ssl_conf_mtu().
+ *
* \param conf SSL configuration
* \param mfl_code Code for maximum fragment length (allowed values:
* MBEDTLS_SSL_MAX_FRAG_LEN_512, MBEDTLS_SSL_MAX_FRAG_LEN_1024,
@@ -2695,6 +2740,9 @@
* \brief Return the (maximum) number of bytes added by the record
* layer: header + encryption/MAC overhead (inc. padding)
*
+ * \note This function is not available (always returns an error)
+ * when record compression is enabled.
+ *
* \param ssl SSL context
*
* \return Current maximum record expansion in bytes, or
@@ -2709,12 +2757,8 @@
* This is the value negotiated with peer if any,
* or the locally configured value.
*
- * \note With DTLS, \c mbedtls_ssl_write() will return an error if
- * called with a larger length value.
- * With TLS, \c mbedtls_ssl_write() will fragment the input if
- * necessary and return the number of bytes written; it is up
- * to the caller to call \c mbedtls_ssl_write() again in
- * order to send the remaining bytes if any.
+ * \sa mbedtls_ssl_conf_max_frag_len()
+ * \sa mbedtls_ssl_get_max_record_payload()
*
* \param ssl SSL context
*
@@ -2723,6 +2767,34 @@
size_t mbedtls_ssl_get_max_frag_len( const mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
+/**
+ * \brief Return the current maximum outgoing record payload in bytes.
+ * This takes into account the config.h setting \c
+ * MBEDTLS_SSL_OUT_CONTENT_LEN, the configured and negotiated
+ * max fragment length extension if used, and for DTLS the
+ * path MTU as configured and current record expansion.
+ *
+ * \note With DTLS, \c mbedtls_ssl_write() will return an error if
+ * called with a larger length value.
+ * With TLS, \c mbedtls_ssl_write() will fragment the input if
+ * necessary and return the number of bytes written; it is up
+ * to the caller to call \c mbedtls_ssl_write() again in
+ * order to send the remaining bytes if any.
+ *
+ * \note This function is not available (always returns an error)
+ * when record compression is enabled.
+ *
+ * \sa mbedtls_ssl_conf_mtu()
+ * \sa mbedtls_ssl_get_max_frag_len()
+ * \sa mbedtls_ssl_get_record_expansion()
+ *
+ * \param ssl SSL context
+ *
+ * \return Current maximum payload for an outgoing record,
+ * or a negative error code.
+ */
+int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl );
+
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* \brief Return the peer certificate from the current connection
diff --git a/include/mbedtls/ssl_internal.h b/include/mbedtls/ssl_internal.h
index d214703..18982f8 100644
--- a/include/mbedtls/ssl_internal.h
+++ b/include/mbedtls/ssl_internal.h
@@ -298,8 +298,9 @@
uint32_t retransmit_timeout; /*!< Current value of timeout */
unsigned char retransmit_state; /*!< Retransmission state */
- mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */
- mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */
+ mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */
+ mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */
+ unsigned char *cur_msg_p; /*!< Position in current message */
unsigned int in_flight_start_seq; /*!< Minimum message sequence in the
flight being received */
mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for
@@ -559,6 +560,7 @@
int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl );
int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want );
+int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl );
int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl );
@@ -668,6 +670,7 @@
void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl );
void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl );
int mbedtls_ssl_resend( mbedtls_ssl_context *ssl );
+int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl );
#endif
/* Visible for testing purposes only */
diff --git a/library/ssl_cli.c b/library/ssl_cli.c
index 4666083..73e4391 100644
--- a/library/ssl_cli.c
+++ b/library/ssl_cli.c
@@ -1088,12 +1088,21 @@
mbedtls_ssl_send_flight_completed( ssl );
#endif
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+ if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+ ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+ {
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+ return( ret );
+ }
+#endif
+
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write client hello" ) );
return( 0 );
@@ -3075,9 +3084,9 @@
ssl->state++;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
@@ -3260,9 +3269,9 @@
ssl->state++;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
@@ -3402,7 +3411,7 @@
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
{
- if( ( ret = mbedtls_ssl_resend( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
return( ret );
}
#endif
diff --git a/library/ssl_srv.c b/library/ssl_srv.c
index 2872f1f..eda50bb 100644
--- a/library/ssl_srv.c
+++ b/library/ssl_srv.c
@@ -2384,12 +2384,21 @@
ssl->state = MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+ if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+ ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+ {
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+ return( ret );
+ }
+#endif
+
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write hello verify request" ) );
return( 0 );
@@ -2624,7 +2633,7 @@
ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE;
ssl->out_msg[0] = MBEDTLS_SSL_HS_SERVER_HELLO;
- ret = mbedtls_ssl_write_record( ssl );
+ ret = mbedtls_ssl_write_handshake_msg( ssl );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write server hello" ) );
@@ -2819,7 +2828,7 @@
ssl->out_msg[4 + ct_len + sa_len] = (unsigned char)( total_dn_size >> 8 );
ssl->out_msg[5 + ct_len + sa_len] = (unsigned char)( total_dn_size );
- ret = mbedtls_ssl_write_record( ssl );
+ ret = mbedtls_ssl_write_handshake_msg( ssl );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write certificate request" ) );
@@ -3336,9 +3345,9 @@
ssl->state++;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
@@ -3363,12 +3372,21 @@
mbedtls_ssl_send_flight_completed( ssl );
#endif
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+ if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+ ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+ {
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+ return( ret );
+ }
+#endif
+
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write server hello done" ) );
return( 0 );
@@ -4227,9 +4245,9 @@
*/
ssl->handshake->new_session_ticket = 0;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
@@ -4258,7 +4276,7 @@
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
{
- if( ( ret = mbedtls_ssl_resend( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
return( ret );
}
#endif
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index 91f96c8..530f283 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -2822,20 +2822,49 @@
/*
* Retransmit the current flight of messages.
+ */
+int mbedtls_ssl_resend( mbedtls_ssl_context *ssl )
+{
+ int ret = 0;
+
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> mbedtls_ssl_resend" ) );
+
+ ret = mbedtls_ssl_flight_transmit( ssl );
+
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= mbedtls_ssl_resend" ) );
+
+ return( ret );
+}
+
+/*
+ * Transmit or retransmit the current flight of messages.
*
* Need to remember the current message in case flush_output returns
* WANT_WRITE, causing us to exit this function and come back later.
* This function must be called until state is no longer SENDING.
*/
-int mbedtls_ssl_resend( mbedtls_ssl_context *ssl )
+int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl )
{
- MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> mbedtls_ssl_resend" ) );
+ const int ret_payload = mbedtls_ssl_get_max_out_record_payload( ssl );
+ const size_t max_record_payload = (size_t) ret_payload;
+ /* DTLS handshake headers are 12 bytes */
+ const size_t max_hs_fragment_len = max_record_payload - 12;
+
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> mbedtls_ssl_flight_transmit" ) );
+
+ if( ret_payload < 0 )
+ {
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_get_max_out_record_payload",
+ ret_payload );
+ return( ret_payload );
+ }
if( ssl->handshake->retransmit_state != MBEDTLS_SSL_RETRANS_SENDING )
{
- MBEDTLS_SSL_DEBUG_MSG( 2, ( "initialise resending" ) );
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "initialise flight transmission" ) );
ssl->handshake->cur_msg = ssl->handshake->flight;
+ ssl->handshake->cur_msg_p = ssl->handshake->flight->p + 12;
ssl_swap_epochs( ssl );
ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_SENDING;
@@ -2844,8 +2873,7 @@
while( ssl->handshake->cur_msg != NULL )
{
int ret;
- mbedtls_ssl_flight_item *cur = ssl->handshake->cur_msg;
-
+ const mbedtls_ssl_flight_item * const cur = ssl->handshake->cur_msg;
/* Swap epochs before sending Finished: we can't do it after
* sending ChangeCipherSpec, in case write returns WANT_READ.
* Must be done before copying, may change out_msg pointer */
@@ -2855,14 +2883,72 @@
ssl_swap_epochs( ssl );
}
- memcpy( ssl->out_msg, cur->p, cur->len );
- ssl->out_msglen = cur->len;
- ssl->out_msgtype = cur->type;
+ /* CCS is copied as is, while HS messages may need fragmentation */
+ if( cur->type == MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC )
+ {
+ memcpy( ssl->out_msg, cur->p, cur->len );
+ ssl->out_msglen = cur->len;
+ ssl->out_msgtype = cur->type;
- ssl->handshake->cur_msg = cur->next;
+ /* Update position inside current message */
+ ssl->handshake->cur_msg_p += cur->len;
+ }
+ else
+ {
+ const unsigned char * const p = ssl->handshake->cur_msg_p;
+ const size_t hs_len = cur->len - 12;
+ const size_t frag_off = p - ( cur->p + 12 );
+ const size_t rem_len = hs_len - frag_off;
+ const size_t frag_len = rem_len > max_hs_fragment_len
+ ? max_hs_fragment_len : rem_len;
- MBEDTLS_SSL_DEBUG_BUF( 3, "resent handshake message header", ssl->out_msg, 12 );
+ if( frag_off == 0 && frag_len != hs_len )
+ {
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "fragmenting handshake message (%u > %u)",
+ (unsigned) hs_len,
+ (unsigned) max_hs_fragment_len ) );
+ }
+ /* Messages are stored with handshake headers as if not fragmented,
+ * copy beginning of headers then fill fragmentation fields.
+ * Handshake headers: type(1) len(3) seq(2) f_off(3) f_len(3) */
+ memcpy( ssl->out_msg, cur->p, 6 );
+
+ ssl->out_msg[6] = ( ( frag_off >> 16 ) & 0xff );
+ ssl->out_msg[7] = ( ( frag_off >> 8 ) & 0xff );
+ ssl->out_msg[8] = ( ( frag_off ) & 0xff );
+
+ ssl->out_msg[ 9] = ( ( frag_len >> 16 ) & 0xff );
+ ssl->out_msg[10] = ( ( frag_len >> 8 ) & 0xff );
+ ssl->out_msg[11] = ( ( frag_len ) & 0xff );
+
+ MBEDTLS_SSL_DEBUG_BUF( 3, "handshake header", ssl->out_msg, 12 );
+
+ /* Copy the handshake message content and set records fields */
+ memcpy( ssl->out_msg + 12, p, frag_len );
+ ssl->out_msglen = frag_len + 12;
+ ssl->out_msgtype = cur->type;
+
+ /* Update position inside current message */
+ ssl->handshake->cur_msg_p += frag_len;
+ }
+
+ /* If done with the current message move to the next one if any */
+ if( ssl->handshake->cur_msg_p >= cur->p + cur->len )
+ {
+ if( cur->next != NULL )
+ {
+ ssl->handshake->cur_msg = cur->next;
+ ssl->handshake->cur_msg_p = cur->next->p + 12;
+ }
+ else
+ {
+ ssl->handshake->cur_msg = NULL;
+ ssl->handshake->cur_msg_p = NULL;
+ }
+ }
+
+ /* Actually send the message out */
if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
@@ -2870,6 +2956,7 @@
}
}
+ /* Update state and set timer */
if( ssl->state == MBEDTLS_SSL_HANDSHAKE_OVER )
ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_FINISHED;
else
@@ -2878,7 +2965,7 @@
ssl_set_timer( ssl, ssl->handshake->retransmit_timeout );
}
- MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= mbedtls_ssl_resend" ) );
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= mbedtls_ssl_flight_transmit" ) );
return( 0 );
}
@@ -2927,43 +3014,75 @@
#endif /* MBEDTLS_SSL_PROTO_DTLS */
/*
- * Record layer functions
+ * Handshake layer functions
*/
/*
- * Write current record.
- * Uses ssl->out_msgtype, ssl->out_msglen and bytes at ssl->out_msg.
+ * Write (DTLS: or queue) current handshake (including CCS) message.
+ *
+ * - fill in handshake headers
+ * - update handshake checksum
+ * - DTLS: save message for resending
+ * - then pass to the record layer
+ *
+ * DTLS: except for HelloRequest, messages are only queued, and will only be
+ * actually sent when calling flight_transmit() or resend().
+ *
+ * Inputs:
+ * - ssl->out_msglen: 4 + actual handshake message len
+ * (4 is the size of handshake headers for TLS)
+ * - ssl->out_msg[0]: the handshake type (ClientHello, ServerHello, etc)
+ * - ssl->out_msg + 4: the handshake message body
+ *
+ * Ouputs, ie state before passing to flight_append() or write_record():
+ * - ssl->out_msglen: the length of the record contents
+ * (including handshake headers but excluding record headers)
+ * - ssl->out_msg: the record contents (handshake headers + content)
*/
-int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl )
+int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl )
{
- int ret, done = 0, out_msg_type;
- size_t len = ssl->out_msglen;
+ int ret;
+ const size_t hs_len = ssl->out_msglen - 4;
+ const unsigned char hs_type = ssl->out_msg[0];
- MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write record" ) );
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write handshake message" ) );
+
+ /*
+ * Sanity checks
+ */
+ if( ssl->out_msgtype != MBEDTLS_SSL_MSG_HANDSHAKE &&
+ ssl->out_msgtype != MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC )
+ {
+ MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
+ return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
+ }
+
+ if( ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE &&
+ hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST &&
+ ssl->handshake == NULL )
+ {
+ MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
+ return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
+ }
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
ssl->handshake != NULL &&
ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
{
- ; /* Skip special handshake treatment when resending */
+ MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
+ return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
- else
#endif
+
+ /*
+ * Fill handshake headers
+ */
if( ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE )
{
- out_msg_type = ssl->out_msg[0];
-
- if( out_msg_type != MBEDTLS_SSL_HS_HELLO_REQUEST &&
- ssl->handshake == NULL )
- {
- MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
- return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
- }
-
- ssl->out_msg[1] = (unsigned char)( ( len - 4 ) >> 16 );
- ssl->out_msg[2] = (unsigned char)( ( len - 4 ) >> 8 );
- ssl->out_msg[3] = (unsigned char)( ( len - 4 ) );
+ ssl->out_msg[1] = (unsigned char)( hs_len >> 16 );
+ ssl->out_msg[2] = (unsigned char)( hs_len >> 8 );
+ ssl->out_msg[3] = (unsigned char)( hs_len );
/*
* DTLS has additional fields in the Handshake layer,
@@ -2980,17 +3099,16 @@
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "DTLS handshake message too large: "
"size %u, maximum %u",
- (unsigned) ( ssl->in_hslen - 4 ),
+ (unsigned) ( hs_len ),
(unsigned) ( MBEDTLS_SSL_OUT_CONTENT_LEN - 12 ) ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
- memmove( ssl->out_msg + 12, ssl->out_msg + 4, len - 4 );
+ memmove( ssl->out_msg + 12, ssl->out_msg + 4, hs_len );
ssl->out_msglen += 8;
- len += 8;
/* Write message_seq and update it, except for HelloRequest */
- if( out_msg_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
+ if( hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
{
ssl->out_msg[4] = ( ssl->handshake->out_msg_seq >> 8 ) & 0xFF;
ssl->out_msg[5] = ( ssl->handshake->out_msg_seq ) & 0xFF;
@@ -3002,23 +3120,22 @@
ssl->out_msg[5] = 0;
}
- /* We don't fragment, so frag_offset = 0 and frag_len = len */
+ /* Handshake hashes are computed without fragmentation,
+ * so set frag_offset = 0 and frag_len = hs_len for now */
memset( ssl->out_msg + 6, 0x00, 3 );
memcpy( ssl->out_msg + 9, ssl->out_msg + 1, 3 );
}
#endif /* MBEDTLS_SSL_PROTO_DTLS */
- if( out_msg_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
- ssl->handshake->update_checksum( ssl, ssl->out_msg, len );
+ /* Update running hashes of hanshake messages seen */
+ if( hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
+ ssl->handshake->update_checksum( ssl, ssl->out_msg, ssl->out_msglen );
}
- /* Save handshake and CCS messages for resending */
+ /* Either send now, or just save to be sent (and resent) later */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
- ssl->handshake != NULL &&
- ssl->handshake->retransmit_state != MBEDTLS_SSL_RETRANS_SENDING &&
- ( ssl->out_msgtype == MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC ||
- ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE ) )
+ hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
{
if( ( ret = ssl_flight_append( ssl ) ) != 0 )
{
@@ -3026,7 +3143,39 @@
return( ret );
}
}
+ else
#endif
+ {
+ if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ {
+ MBEDTLS_SSL_DEBUG_RET( 1, "ssl_write_record", ret );
+ return( ret );
+ }
+ }
+
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write handshake message" ) );
+
+ return( 0 );
+}
+
+/*
+ * Record layer functions
+ */
+
+/*
+ * Write current record.
+ *
+ * Uses:
+ * - ssl->out_msgtype: type of the message (AppData, Handshake, Alert, CCS)
+ * - ssl->out_msglen: length of the record content (excl headers)
+ * - ssl->out_msg: record content
+ */
+int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl )
+{
+ int ret, done = 0;
+ size_t len = ssl->out_msglen;
+
+ MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write record" ) );
#if defined(MBEDTLS_ZLIB_SUPPORT)
if( ssl->transform_out != NULL &&
@@ -4542,9 +4691,9 @@
ssl->state++;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
@@ -4955,9 +5104,9 @@
ssl->state++;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
@@ -5583,12 +5732,21 @@
mbedtls_ssl_send_flight_completed( ssl );
#endif
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+ if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+ ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+ {
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+ return( ret );
+ }
+#endif
+
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write finished" ) );
return( 0 );
@@ -5973,6 +6131,9 @@
ssl->transform_in = NULL;
ssl->transform_out = NULL;
+ ssl->session_in = NULL;
+ ssl->session_out = NULL;
+
memset( ssl->out_buf, 0, MBEDTLS_SSL_OUT_BUFFER_LEN );
if( partial == 0 )
memset( ssl->in_buf, 0, MBEDTLS_SSL_IN_BUFFER_LEN );
@@ -6597,6 +6758,13 @@
}
#endif
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+void mbedtls_ssl_conf_mtu( mbedtls_ssl_config *conf, uint16_t mtu )
+{
+ conf->mtu = mtu;
+}
+#endif
+
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
int mbedtls_ssl_conf_max_frag_len( mbedtls_ssl_config *conf, unsigned char mfl_code )
{
@@ -6841,26 +7009,48 @@
{
size_t transform_expansion;
const mbedtls_ssl_transform *transform = ssl->transform_out;
+ unsigned block_size;
+
+ if( transform == NULL )
+ return( (int) mbedtls_ssl_hdr_len( ssl ) );
#if defined(MBEDTLS_ZLIB_SUPPORT)
if( ssl->session_out->compression != MBEDTLS_SSL_COMPRESS_NULL )
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+ }
#endif
- if( transform == NULL )
- return( (int) mbedtls_ssl_hdr_len( ssl ) );
-
switch( mbedtls_cipher_get_cipher_mode( &transform->cipher_ctx_enc ) )
{
case MBEDTLS_MODE_GCM:
case MBEDTLS_MODE_CCM:
+ case MBEDTLS_MODE_CHACHAPOLY:
case MBEDTLS_MODE_STREAM:
transform_expansion = transform->minlen;
break;
case MBEDTLS_MODE_CBC:
- transform_expansion = transform->maclen
- + mbedtls_cipher_get_block_size( &transform->cipher_ctx_enc );
+
+ block_size = mbedtls_cipher_get_block_size(
+ &transform->cipher_ctx_enc );
+
+#if defined(MBEDTLS_SSL_PROTO_TLS1_1) || defined(MBEDTLS_SSL_PROTO_TLS1_2)
+ if( ssl->minor_ver >= MBEDTLS_SSL_MINOR_VERSION_2 )
+ {
+ /* Expansion due to addition of
+ * - MAC
+ * - CBC padding (theoretically up to 256 bytes, but
+ * we never use more than block_size)
+ * - explicit IV
+ */
+ transform_expansion = transform->maclen + 2 * block_size;
+ }
+ else
+#endif /* MBEDTLS_SSL_PROTO_TLS1_1 || MBEDTLS_SSL_PROTO_TLS1_2 */
+ {
+ /* No explicit IV prior to TLS 1.1. */
+ transform_expansion = transform->maclen + block_size;
+ }
break;
default:
@@ -6881,19 +7071,59 @@
*/
max_len = ssl_mfl_code_to_length( ssl->conf->mfl_code );
- /*
- * Check if a smaller max length was negotiated
- */
+ /* Check if a smaller max length was negotiated */
if( ssl->session_out != NULL &&
ssl_mfl_code_to_length( ssl->session_out->mfl_code ) < max_len )
{
max_len = ssl_mfl_code_to_length( ssl->session_out->mfl_code );
}
- return max_len;
+ /* During a handshake, use the value being negotiated */
+ if( ssl->session_negotiate != NULL &&
+ ssl_mfl_code_to_length( ssl->session_negotiate->mfl_code ) < max_len )
+ {
+ max_len = ssl_mfl_code_to_length( ssl->session_negotiate->mfl_code );
+ }
+
+ return( max_len );
}
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
+int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl )
+{
+ size_t max_len = MBEDTLS_SSL_OUT_CONTENT_LEN;
+
+#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
+ const size_t mfl = mbedtls_ssl_get_max_frag_len( ssl );
+
+ if( max_len > mfl )
+ max_len = mfl;
+#endif
+
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+ if( ssl->conf->mtu != 0 )
+ {
+ const size_t mtu = ssl->conf->mtu;
+ const int ret = mbedtls_ssl_get_record_expansion( ssl );
+ const size_t overhead = (size_t) ret;
+
+ if( ret < 0 )
+ return( ret );
+
+ if( mtu <= overhead )
+ {
+ MBEDTLS_SSL_DEBUG_MSG( 1, ( "MTU too low for record expansion" ) );
+ return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+ }
+
+ if( max_len > mtu - overhead )
+ max_len = mtu - overhead;
+ }
+#endif
+
+ return( (int) max_len );
+}
+
#if defined(MBEDTLS_X509_CRT_PARSE_C)
const mbedtls_x509_crt *mbedtls_ssl_get_peer_cert( const mbedtls_ssl_context *ssl )
{
@@ -6981,9 +7211,9 @@
ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE;
ssl->out_msg[0] = MBEDTLS_SSL_HS_HELLO_REQUEST;
- if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
- MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
@@ -7148,7 +7378,7 @@
if( ssl->handshake != NULL &&
ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
{
- if( ( ret = mbedtls_ssl_resend( ssl ) ) != 0 )
+ if( ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
return( ret );
}
}
@@ -7445,12 +7675,15 @@
static int ssl_write_real( mbedtls_ssl_context *ssl,
const unsigned char *buf, size_t len )
{
- int ret;
-#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
- size_t max_len = mbedtls_ssl_get_max_frag_len( ssl );
-#else
- size_t max_len = MBEDTLS_SSL_OUT_CONTENT_LEN;
-#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
+ int ret = mbedtls_ssl_get_max_out_record_payload( ssl );
+ const size_t max_len = (size_t) ret;
+
+ if( ret < 0 )
+ {
+ MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_get_max_out_record_payload", ret );
+ return( ret );
+ }
+
if( len > max_len )
{
#if defined(MBEDTLS_SSL_PROTO_DTLS)
diff --git a/programs/ssl/ssl_client2.c b/programs/ssl/ssl_client2.c
index 0dd9e3f..7cdc53a 100644
--- a/programs/ssl/ssl_client2.c
+++ b/programs/ssl/ssl_client2.c
@@ -106,6 +106,7 @@
#define DFL_TRANSPORT MBEDTLS_SSL_TRANSPORT_STREAM
#define DFL_HS_TO_MIN 0
#define DFL_HS_TO_MAX 0
+#define DFL_DTLS_MTU -1
#define DFL_FALLBACK -1
#define DFL_EXTENDED_MS -1
#define DFL_ETM -1
@@ -198,7 +199,8 @@
#define USAGE_DTLS \
" dtls=%%d default: 0 (TLS)\n" \
" hs_timeout=%%d-%%d default: (library default: 1000-60000)\n" \
- " range of DTLS handshake timeouts in millisecs\n"
+ " range of DTLS handshake timeouts in millisecs\n" \
+ " mtu=%%d default: (library default: unlimited)\n"
#else
#define USAGE_DTLS ""
#endif
@@ -345,6 +347,7 @@
int transport; /* TLS or DTLS? */
uint32_t hs_to_min; /* Initial value of DTLS handshake timer */
uint32_t hs_to_max; /* Max value of DTLS handshake timer */
+ int dtls_mtu; /* UDP Maximum tranport unit for DTLS */
int fallback; /* is this a fallback connection? */
int extended_ms; /* negotiate extended master secret? */
int etm; /* negotiate encrypt then mac? */
@@ -617,6 +620,7 @@
opt.transport = DFL_TRANSPORT;
opt.hs_to_min = DFL_HS_TO_MIN;
opt.hs_to_max = DFL_HS_TO_MAX;
+ opt.dtls_mtu = DFL_DTLS_MTU;
opt.fallback = DFL_FALLBACK;
opt.extended_ms = DFL_EXTENDED_MS;
opt.etm = DFL_ETM;
@@ -927,6 +931,12 @@
if( opt.hs_to_min == 0 || opt.hs_to_max < opt.hs_to_min )
goto usage;
}
+ else if( strcmp( p, "mtu" ) == 0 )
+ {
+ opt.dtls_mtu = atoi( q );
+ if( opt.dtls_mtu < 0 )
+ goto usage;
+ }
else if( strcmp( p, "recsplit" ) == 0 )
{
opt.recsplit = atoi( q );
@@ -1327,6 +1337,9 @@
if( opt.hs_to_min != DFL_HS_TO_MIN || opt.hs_to_max != DFL_HS_TO_MAX )
mbedtls_ssl_conf_handshake_timeout( &conf, opt.hs_to_min,
opt.hs_to_max );
+
+ if( opt.dtls_mtu != DFL_DTLS_MTU )
+ mbedtls_ssl_conf_mtu( &conf, opt.dtls_mtu );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
diff --git a/programs/ssl/ssl_server2.c b/programs/ssl/ssl_server2.c
index 7654a64..484f84f 100644
--- a/programs/ssl/ssl_server2.c
+++ b/programs/ssl/ssl_server2.c
@@ -150,6 +150,7 @@
#define DFL_ANTI_REPLAY -1
#define DFL_HS_TO_MIN 0
#define DFL_HS_TO_MAX 0
+#define DFL_DTLS_MTU -1
#define DFL_BADMAC_LIMIT -1
#define DFL_EXTENDED_MS -1
#define DFL_ETM -1
@@ -297,7 +298,8 @@
#define USAGE_DTLS \
" dtls=%%d default: 0 (TLS)\n" \
" hs_timeout=%%d-%%d default: (library default: 1000-60000)\n" \
- " range of DTLS handshake timeouts in millisecs\n"
+ " range of DTLS handshake timeouts in millisecs\n" \
+ " mtu=%%d default: (library default: unlimited)\n"
#else
#define USAGE_DTLS ""
#endif
@@ -470,6 +472,7 @@
int anti_replay; /* Use anti-replay for DTLS? -1 for default */
uint32_t hs_to_min; /* Initial value of DTLS handshake timer */
uint32_t hs_to_max; /* Max value of DTLS handshake timer */
+ int dtls_mtu; /* UDP Maximum tranport unit for DTLS */
int badmac_limit; /* Limit of records with bad MAC */
} opt;
@@ -1338,6 +1341,7 @@
opt.anti_replay = DFL_ANTI_REPLAY;
opt.hs_to_min = DFL_HS_TO_MIN;
opt.hs_to_max = DFL_HS_TO_MAX;
+ opt.dtls_mtu = DFL_DTLS_MTU;
opt.badmac_limit = DFL_BADMAC_LIMIT;
opt.extended_ms = DFL_EXTENDED_MS;
opt.etm = DFL_ETM;
@@ -1684,6 +1688,12 @@
if( opt.hs_to_min == 0 || opt.hs_to_max < opt.hs_to_min )
goto usage;
}
+ else if( strcmp( p, "mtu" ) == 0 )
+ {
+ opt.dtls_mtu = atoi( q );
+ if( opt.dtls_mtu < 0 )
+ goto usage;
+ }
else if( strcmp( p, "sni" ) == 0 )
{
opt.sni = q;
@@ -2155,6 +2165,9 @@
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( opt.hs_to_min != DFL_HS_TO_MIN || opt.hs_to_max != DFL_HS_TO_MAX )
mbedtls_ssl_conf_handshake_timeout( &conf, opt.hs_to_min, opt.hs_to_max );
+
+ if( opt.dtls_mtu != DFL_DTLS_MTU )
+ mbedtls_ssl_conf_mtu( &conf, opt.dtls_mtu );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index 937a27b..397c565 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -4877,6 +4877,382 @@
-c "found fragmented DTLS handshake message" \
-C "error"
+# Tests for sending fragmented handshake messages with DTLS
+#
+# Use client auth when we need the client to send large messages,
+# and use large cert chains on both sides too (the long chains we have all use
+# both RSA and ECDSA, but ideally we should have long chains with either).
+# Sizes reached (UDP payload):
+# - 2037B for server certificate
+# - 1542B for client certificate
+# - 1013B for newsessionticket
+# - all others below 512B
+# All those tests assume MAX_CONTENT_LEN is at least 2048
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test "DTLS fragmenting: none (for reference)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ max_frag_len=2048" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ max_frag_len=2048" \
+ 0 \
+ -S "found fragmented DTLS handshake message" \
+ -C "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test "DTLS fragmenting: server only (max_frag_len)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ max_frag_len=1024" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ max_frag_len=2048" \
+ 0 \
+ -S "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test "DTLS fragmenting: server only (more) (max_frag_len)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ max_frag_len=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ max_frag_len=2048" \
+ 0 \
+ -S "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test "DTLS fragmenting: client-initiated, server only (max_frag_len)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=none \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ max_frag_len=2048" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ max_frag_len=512" \
+ 0 \
+ -S "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test "DTLS fragmenting: client-initiated, both (max_frag_len)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ max_frag_len=2048" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ max_frag_len=512" \
+ 0 \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test "DTLS fragmenting: none (for reference) (MTU)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ mtu=2048" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ mtu=2048" \
+ 0 \
+ -S "found fragmented DTLS handshake message" \
+ -C "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test "DTLS fragmenting: client (MTU)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ mtu=2048" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ mtu=512" \
+ 0 \
+ -s "found fragmented DTLS handshake message" \
+ -C "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test "DTLS fragmenting: server (MTU)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ mtu=2048" \
+ 0 \
+ -S "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test "DTLS fragmenting: both (MTU)" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ mtu=512" \
+ 0 \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+# the proxy shouldn't drop or mess up anything, so we shouldn't need to resend
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test "DTLS fragmenting: proxy MTU, simple handshake" \
+ -p "$P_PXY mtu=512" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ mtu=512" \
+ 0 \
+ -S "resend" \
+ -C "resend" \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+# This ensures things still work after session_reset(),
+# for example it would have caught #1941.
+# It also exercises the "resumed hanshake" flow.
+# Since we don't support reading fragmented ClientHello yet,
+# up the MTU to 1450 (larger than ClientHello with session ticket,
+# but still smaller than client's Certificate to ensure fragmentation).
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test "DTLS fragmenting: proxy MTU, resumed handshake" \
+ -p "$P_PXY mtu=1450" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ mtu=1450" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ mtu=1450 reconnect=1" \
+ 0 \
+ -S "resend" \
+ -C "resend" \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_CHACHAPOLY_C
+run_test "DTLS fragmenting: proxy MTU, ChachaPoly renego" \
+ -p "$P_PXY mtu=512" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ exchanges=2 renegotiation=1 \
+ force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ exchanges=2 renegotiation=1 renegotiate=1 \
+ mtu=512" \
+ 0 \
+ -S "resend" \
+ -C "resend" \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_GCM_C
+run_test "DTLS fragmenting: proxy MTU, AES-GCM renego" \
+ -p "$P_PXY mtu=512" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ exchanges=2 renegotiation=1 \
+ force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ exchanges=2 renegotiation=1 renegotiate=1 \
+ mtu=512" \
+ 0 \
+ -S "resend" \
+ -C "resend" \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_CCM_C
+run_test "DTLS fragmenting: proxy MTU, AES-CCM renego" \
+ -p "$P_PXY mtu=512" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ exchanges=2 renegotiation=1 \
+ force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ exchanges=2 renegotiation=1 renegotiate=1 \
+ mtu=512" \
+ 0 \
+ -S "resend" \
+ -C "resend" \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
+requires_config_enabled MBEDTLS_SSL_ENCRYPT_THEN_MAC
+run_test "DTLS fragmenting: proxy MTU, AES-CBC EtM renego" \
+ -p "$P_PXY mtu=512" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ exchanges=2 renegotiation=1 \
+ force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ exchanges=2 renegotiation=1 renegotiate=1 \
+ mtu=512" \
+ 0 \
+ -S "resend" \
+ -C "resend" \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
+run_test "DTLS fragmenting: proxy MTU, AES-CBC non-EtM renego" \
+ -p "$P_PXY mtu=512" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ exchanges=2 renegotiation=1 \
+ force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 etm=0 \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ exchanges=2 renegotiation=1 renegotiate=1 \
+ mtu=512" \
+ 0 \
+ -S "resend" \
+ -C "resend" \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+client_needs_more_time 2
+run_test "DTLS fragmenting: proxy MTU + 3d" \
+ -p "$P_PXY mtu=512 drop=8 delay=8 duplicate=8" \
+ "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+ crt_file=data_files/server7_int-ca.crt \
+ key_file=data_files/server7.key \
+ mtu=512" \
+ "$P_CLI dtls=1 debug_level=2 \
+ crt_file=data_files/server8_int-ca2.crt \
+ key_file=data_files/server8.key \
+ mtu=512" \
+ 0 \
+ -s "found fragmented DTLS handshake message" \
+ -c "found fragmented DTLS handshake message" \
+ -C "error"
+
# Tests for specific things with "unreliable" UDP connection
not_with_valgrind # spurious resend due to timeout