diff --git a/ChangeLog b/ChangeLog
index f505b38..bab69f6 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -2,6 +2,9 @@
 
 = mbed TLS x.x.x branch released xxxx-xx-xx
 
+Features
+   * Add support for fragmentation of outoing DTLS handshake messages.
+
 Bugfix
    * Fixes an issue with MBEDTLS_CHACHAPOLY_C which would not compile if
      MBEDTLS_ARC4_C and MBEDTLS_CIPHER_NULL_CIPHER weren't also defined. #1890
@@ -10,6 +13,11 @@
    * Add ecc extensions only if an ecc based ciphersuite is used.
      This improves compliance to RFC 4492, and as a result, solves
      interoperability issues with BouncyCastle. Raised by milenamil in #1157.
+   * Fix potential use-after-free in mbedtls_ssl_get_max_frag_len()
+     and mbedtls_ssl_get_record_expansion() after a session reset. Fixes #1941.
+   * Fix a miscalculation of the maximum record expansion in
+     mbedtls_ssl_get_record_expansion() in case of ChachaPoly ciphersuites,
+     or CBC ciphersuites in (D)TLS versions 1.1 or higher. Fixes #1913, #1914.
    * Fix overly strict bounds check in ssl_parse_certificate_request()
      which could lead to valid CertificateRequest messages being rejected.
      Fixes #1954.
@@ -22,6 +30,9 @@
    * Improve compatibility with some alternative CCM implementations by using
      CCM test vectors from RAM.
 
+INTERNAL NOTE: need to bump soversion of libmbedtls:
+- added new member 'mtu' to public 'mbedtls_ssl_conf' structure
+
 = mbed TLS 2.12.0 branch released 2018-07-25
 
 Security
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index 2d511a8..a3b514c 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -958,6 +958,10 @@
     unsigned int dhm_min_bitlen;    /*!< min. bit length of the DHM prime   */
 #endif
 
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+    uint16_t mtu;                   /*!< path mtu, used to fragment outoing messages */
+#endif
+
     unsigned char max_major_ver;    /*!< max. major version used            */
     unsigned char max_minor_ver;    /*!< max. minor version used            */
     unsigned char min_major_ver;    /*!< min. major version used            */
@@ -2423,6 +2427,35 @@
                                           char cert_req_ca_list );
 #endif /* MBEDTLS_SSL_SRV_C */
 
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+/**
+ * \brief          Set the Maximum Tranport Unit (MTU).
+ *                 Special value: 0 means unset (no limit).
+ *                 This represents the maximum size of a datagram payload
+ *                 handled by the transport layer (usually UDP) as determined
+ *                 by the network link and stack. In practice, this controls
+ *                 the maximum size datagram the DTLS layer will pass to the
+ *                 \c f_send() callback set using \c mbedtls_ssl_set_bio().
+ *
+ * \note           This only controls the size of the packet we send.
+ *                 Client-side, you can request the server to use smaller
+ *                 records with \c mbedtls_conf_max_frag_len().
+ *
+ * \note           If both a MTU and a maximum fragment length have been
+ *                 configured (or negotiated with the peer), the lower limit
+ *                 is used.
+ *
+ * \note           Values larger than \c MBEDTLS_SSL_OUT_CONTENT_LEN have no
+ *                 effect. This can only be used to decrease the maximum size
+ *                 of datagrams sent. Values lower than record layer expansion
+ *                 are ignored.
+ *
+ * \param conf     SSL configuration
+ * \param mtu      Value of the path MTU in bytes
+ */
+void mbedtls_ssl_conf_mtu( mbedtls_ssl_config *conf, uint16_t mtu );
+#endif /* MBEDTLS_SSL_PROTO_DTLS */
+
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
 /**
  * \brief          Set the maximum fragment length to emit and/or negotiate
@@ -2433,6 +2466,18 @@
  *                 (Client: set maximum fragment length to emit *and*
  *                 negotiate with the server during handshake)
  *
+ * \note           With TLS, this currently only affects ApplicationData (sent
+ *                 with \c mbedtls_ssl_read()), not handshake messages.
+ *                 With DTLS, this affects both ApplicationData and handshake.
+ *
+ * \note           This sets the maximum length for a record's payload,
+ *                 excluding record overhead that will be added to it, see
+ *                 \c mbedtls_ssl_get_record_expansion().
+ *
+ * \note           For DTLS, it is also possible to set a limit for the total
+ *                 size of daragrams passed to the transport layer, including
+ *                 record overhead, see \c mbedtls_ssl_conf_mtu().
+ *
  * \param conf     SSL configuration
  * \param mfl_code Code for maximum fragment length (allowed values:
  *                 MBEDTLS_SSL_MAX_FRAG_LEN_512,  MBEDTLS_SSL_MAX_FRAG_LEN_1024,
@@ -2695,6 +2740,9 @@
  * \brief          Return the (maximum) number of bytes added by the record
  *                 layer: header + encryption/MAC overhead (inc. padding)
  *
+ * \note           This function is not available (always returns an error)
+ *                 when record compression is enabled.
+ *
  * \param ssl      SSL context
  *
  * \return         Current maximum record expansion in bytes, or
@@ -2709,12 +2757,8 @@
  *                 This is the value negotiated with peer if any,
  *                 or the locally configured value.
  *
- * \note           With DTLS, \c mbedtls_ssl_write() will return an error if
- *                 called with a larger length value.
- *                 With TLS, \c mbedtls_ssl_write() will fragment the input if
- *                 necessary and return the number of bytes written; it is up
- *                 to the caller to call \c mbedtls_ssl_write() again in
- *                 order to send the remaining bytes if any.
+ * \sa             mbedtls_ssl_conf_max_frag_len()
+ * \sa             mbedtls_ssl_get_max_record_payload()
  *
  * \param ssl      SSL context
  *
@@ -2723,6 +2767,34 @@
 size_t mbedtls_ssl_get_max_frag_len( const mbedtls_ssl_context *ssl );
 #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
 
+/**
+ * \brief          Return the current maximum outgoing record payload in bytes.
+ *                 This takes into account the config.h setting \c
+ *                 MBEDTLS_SSL_OUT_CONTENT_LEN, the configured and negotiated
+ *                 max fragment length extension if used, and for DTLS the
+ *                 path MTU as configured and current record expansion.
+ *
+ * \note           With DTLS, \c mbedtls_ssl_write() will return an error if
+ *                 called with a larger length value.
+ *                 With TLS, \c mbedtls_ssl_write() will fragment the input if
+ *                 necessary and return the number of bytes written; it is up
+ *                 to the caller to call \c mbedtls_ssl_write() again in
+ *                 order to send the remaining bytes if any.
+ *
+ * \note           This function is not available (always returns an error)
+ *                 when record compression is enabled.
+ *
+ * \sa             mbedtls_ssl_conf_mtu()
+ * \sa             mbedtls_ssl_get_max_frag_len()
+ * \sa             mbedtls_ssl_get_record_expansion()
+ *
+ * \param ssl      SSL context
+ *
+ * \return         Current maximum payload for an outgoing record,
+ *                 or a negative error code.
+ */
+int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl );
+
 #if defined(MBEDTLS_X509_CRT_PARSE_C)
 /**
  * \brief          Return the peer certificate from the current connection
diff --git a/include/mbedtls/ssl_internal.h b/include/mbedtls/ssl_internal.h
index d214703..18982f8 100644
--- a/include/mbedtls/ssl_internal.h
+++ b/include/mbedtls/ssl_internal.h
@@ -298,8 +298,9 @@
 
     uint32_t retransmit_timeout;        /*!<  Current value of timeout       */
     unsigned char retransmit_state;     /*!<  Retransmission state           */
-    mbedtls_ssl_flight_item *flight;            /*!<  Current outgoing flight        */
-    mbedtls_ssl_flight_item *cur_msg;           /*!<  Current message in flight      */
+    mbedtls_ssl_flight_item *flight;    /*!<  Current outgoing flight        */
+    mbedtls_ssl_flight_item *cur_msg;   /*!<  Current message in flight      */
+    unsigned char *cur_msg_p;           /*!<  Position in current message    */
     unsigned int in_flight_start_seq;   /*!<  Minimum message sequence in the
                                               flight being received          */
     mbedtls_ssl_transform *alt_transform_out;   /*!<  Alternative transform for
@@ -559,6 +560,7 @@
 int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl );
 int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want );
 
+int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl );
 int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl );
 int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl );
 
@@ -668,6 +670,7 @@
 void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl );
 void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl );
 int mbedtls_ssl_resend( mbedtls_ssl_context *ssl );
+int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl );
 #endif
 
 /* Visible for testing purposes only */
diff --git a/library/ssl_cli.c b/library/ssl_cli.c
index 4666083..73e4391 100644
--- a/library/ssl_cli.c
+++ b/library/ssl_cli.c
@@ -1088,12 +1088,21 @@
         mbedtls_ssl_send_flight_completed( ssl );
 #endif
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+    if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+        ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+        return( ret );
+    }
+#endif
+
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write client hello" ) );
 
     return( 0 );
@@ -3075,9 +3084,9 @@
 
     ssl->state++;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
@@ -3260,9 +3269,9 @@
 
     ssl->state++;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
@@ -3402,7 +3411,7 @@
     if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
         ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
     {
-        if( ( ret = mbedtls_ssl_resend( ssl ) ) != 0 )
+        if( ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
             return( ret );
     }
 #endif
diff --git a/library/ssl_srv.c b/library/ssl_srv.c
index 2872f1f..eda50bb 100644
--- a/library/ssl_srv.c
+++ b/library/ssl_srv.c
@@ -2384,12 +2384,21 @@
 
     ssl->state = MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+    if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+        ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+        return( ret );
+    }
+#endif
+
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write hello verify request" ) );
 
     return( 0 );
@@ -2624,7 +2633,7 @@
     ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE;
     ssl->out_msg[0]  = MBEDTLS_SSL_HS_SERVER_HELLO;
 
-    ret = mbedtls_ssl_write_record( ssl );
+    ret = mbedtls_ssl_write_handshake_msg( ssl );
 
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write server hello" ) );
 
@@ -2819,7 +2828,7 @@
     ssl->out_msg[4 + ct_len + sa_len] = (unsigned char)( total_dn_size  >> 8 );
     ssl->out_msg[5 + ct_len + sa_len] = (unsigned char)( total_dn_size       );
 
-    ret = mbedtls_ssl_write_record( ssl );
+    ret = mbedtls_ssl_write_handshake_msg( ssl );
 
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write certificate request" ) );
 
@@ -3336,9 +3345,9 @@
 
     ssl->state++;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
@@ -3363,12 +3372,21 @@
         mbedtls_ssl_send_flight_completed( ssl );
 #endif
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+    if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+        ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+        return( ret );
+    }
+#endif
+
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write server hello done" ) );
 
     return( 0 );
@@ -4227,9 +4245,9 @@
      */
     ssl->handshake->new_session_ticket = 0;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
@@ -4258,7 +4276,7 @@
     if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
         ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
     {
-        if( ( ret = mbedtls_ssl_resend( ssl ) ) != 0 )
+        if( ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
             return( ret );
     }
 #endif
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index 91f96c8..530f283 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -2822,20 +2822,49 @@
 
 /*
  * Retransmit the current flight of messages.
+ */
+int mbedtls_ssl_resend( mbedtls_ssl_context *ssl )
+{
+    int ret = 0;
+
+    MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> mbedtls_ssl_resend" ) );
+
+    ret = mbedtls_ssl_flight_transmit( ssl );
+
+    MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= mbedtls_ssl_resend" ) );
+
+    return( ret );
+}
+
+/*
+ * Transmit or retransmit the current flight of messages.
  *
  * Need to remember the current message in case flush_output returns
  * WANT_WRITE, causing us to exit this function and come back later.
  * This function must be called until state is no longer SENDING.
  */
-int mbedtls_ssl_resend( mbedtls_ssl_context *ssl )
+int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl )
 {
-    MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> mbedtls_ssl_resend" ) );
+    const int ret_payload = mbedtls_ssl_get_max_out_record_payload( ssl );
+    const size_t max_record_payload = (size_t) ret_payload;
+    /* DTLS handshake headers are 12 bytes */
+    const size_t max_hs_fragment_len = max_record_payload - 12;
+
+    MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> mbedtls_ssl_flight_transmit" ) );
+
+    if( ret_payload < 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_get_max_out_record_payload",
+                                  ret_payload );
+        return( ret_payload );
+    }
 
     if( ssl->handshake->retransmit_state != MBEDTLS_SSL_RETRANS_SENDING )
     {
-        MBEDTLS_SSL_DEBUG_MSG( 2, ( "initialise resending" ) );
+        MBEDTLS_SSL_DEBUG_MSG( 2, ( "initialise flight transmission" ) );
 
         ssl->handshake->cur_msg = ssl->handshake->flight;
+        ssl->handshake->cur_msg_p = ssl->handshake->flight->p + 12;
         ssl_swap_epochs( ssl );
 
         ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_SENDING;
@@ -2844,8 +2873,7 @@
     while( ssl->handshake->cur_msg != NULL )
     {
         int ret;
-        mbedtls_ssl_flight_item *cur = ssl->handshake->cur_msg;
-
+        const mbedtls_ssl_flight_item * const cur = ssl->handshake->cur_msg;
         /* Swap epochs before sending Finished: we can't do it after
          * sending ChangeCipherSpec, in case write returns WANT_READ.
          * Must be done before copying, may change out_msg pointer */
@@ -2855,14 +2883,72 @@
             ssl_swap_epochs( ssl );
         }
 
-        memcpy( ssl->out_msg, cur->p, cur->len );
-        ssl->out_msglen = cur->len;
-        ssl->out_msgtype = cur->type;
+        /* CCS is copied as is, while HS messages may need fragmentation */
+        if( cur->type == MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC )
+        {
+            memcpy( ssl->out_msg, cur->p, cur->len );
+            ssl->out_msglen = cur->len;
+            ssl->out_msgtype = cur->type;
 
-        ssl->handshake->cur_msg = cur->next;
+            /* Update position inside current message */
+            ssl->handshake->cur_msg_p += cur->len;
+        }
+        else
+        {
+            const unsigned char * const p = ssl->handshake->cur_msg_p;
+            const size_t hs_len = cur->len - 12;
+            const size_t frag_off = p - ( cur->p + 12 );
+            const size_t rem_len = hs_len - frag_off;
+            const size_t frag_len = rem_len > max_hs_fragment_len
+                                  ? max_hs_fragment_len : rem_len;
 
-        MBEDTLS_SSL_DEBUG_BUF( 3, "resent handshake message header", ssl->out_msg, 12 );
+            if( frag_off == 0 && frag_len != hs_len )
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 2, ( "fragmenting handshake message (%u > %u)",
+                                            (unsigned) hs_len,
+                                            (unsigned) max_hs_fragment_len ) );
+            }
 
+            /* Messages are stored with handshake headers as if not fragmented,
+             * copy beginning of headers then fill fragmentation fields.
+             * Handshake headers: type(1) len(3) seq(2) f_off(3) f_len(3) */
+            memcpy( ssl->out_msg, cur->p, 6 );
+
+            ssl->out_msg[6] = ( ( frag_off >> 16 ) & 0xff );
+            ssl->out_msg[7] = ( ( frag_off >>  8 ) & 0xff );
+            ssl->out_msg[8] = ( ( frag_off       ) & 0xff );
+
+            ssl->out_msg[ 9] = ( ( frag_len >> 16 ) & 0xff );
+            ssl->out_msg[10] = ( ( frag_len >>  8 ) & 0xff );
+            ssl->out_msg[11] = ( ( frag_len       ) & 0xff );
+
+            MBEDTLS_SSL_DEBUG_BUF( 3, "handshake header", ssl->out_msg, 12 );
+
+            /* Copy the handshake message content and set records fields */
+            memcpy( ssl->out_msg + 12, p, frag_len );
+            ssl->out_msglen = frag_len + 12;
+            ssl->out_msgtype = cur->type;
+
+            /* Update position inside current message */
+            ssl->handshake->cur_msg_p += frag_len;
+        }
+
+        /* If done with the current message move to the next one if any */
+        if( ssl->handshake->cur_msg_p >= cur->p + cur->len )
+        {
+            if( cur->next != NULL )
+            {
+                ssl->handshake->cur_msg = cur->next;
+                ssl->handshake->cur_msg_p = cur->next->p + 12;
+            }
+            else
+            {
+                ssl->handshake->cur_msg = NULL;
+                ssl->handshake->cur_msg_p = NULL;
+            }
+        }
+
+        /* Actually send the message out */
         if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
         {
             MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
@@ -2870,6 +2956,7 @@
         }
     }
 
+    /* Update state and set timer */
     if( ssl->state == MBEDTLS_SSL_HANDSHAKE_OVER )
         ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_FINISHED;
     else
@@ -2878,7 +2965,7 @@
         ssl_set_timer( ssl, ssl->handshake->retransmit_timeout );
     }
 
-    MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= mbedtls_ssl_resend" ) );
+    MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= mbedtls_ssl_flight_transmit" ) );
 
     return( 0 );
 }
@@ -2927,43 +3014,75 @@
 #endif /* MBEDTLS_SSL_PROTO_DTLS */
 
 /*
- * Record layer functions
+ * Handshake layer functions
  */
 
 /*
- * Write current record.
- * Uses ssl->out_msgtype, ssl->out_msglen and bytes at ssl->out_msg.
+ * Write (DTLS: or queue) current handshake (including CCS) message.
+ *
+ *  - fill in handshake headers
+ *  - update handshake checksum
+ *  - DTLS: save message for resending
+ *  - then pass to the record layer
+ *
+ * DTLS: except for HelloRequest, messages are only queued, and will only be
+ * actually sent when calling flight_transmit() or resend().
+ *
+ * Inputs:
+ *  - ssl->out_msglen: 4 + actual handshake message len
+ *      (4 is the size of handshake headers for TLS)
+ *  - ssl->out_msg[0]: the handshake type (ClientHello, ServerHello, etc)
+ *  - ssl->out_msg + 4: the handshake message body
+ *
+ * Ouputs, ie state before passing to flight_append() or write_record():
+ *   - ssl->out_msglen: the length of the record contents
+ *      (including handshake headers but excluding record headers)
+ *   - ssl->out_msg: the record contents (handshake headers + content)
  */
-int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl )
+int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl )
 {
-    int ret, done = 0, out_msg_type;
-    size_t len = ssl->out_msglen;
+    int ret;
+    const size_t hs_len = ssl->out_msglen - 4;
+    const unsigned char hs_type = ssl->out_msg[0];
 
-    MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write record" ) );
+    MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write handshake message" ) );
+
+    /*
+     * Sanity checks
+     */
+    if( ssl->out_msgtype != MBEDTLS_SSL_MSG_HANDSHAKE &&
+        ssl->out_msgtype != MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
+        return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
+    }
+
+    if( ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE &&
+        hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST &&
+        ssl->handshake == NULL )
+    {
+        MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
+        return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
+    }
 
 #if defined(MBEDTLS_SSL_PROTO_DTLS)
     if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
         ssl->handshake != NULL &&
         ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
     {
-        ; /* Skip special handshake treatment when resending */
+        MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
+        return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
     }
-    else
 #endif
+
+    /*
+     * Fill handshake headers
+     */
     if( ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE )
     {
-        out_msg_type = ssl->out_msg[0];
-
-        if( out_msg_type != MBEDTLS_SSL_HS_HELLO_REQUEST &&
-            ssl->handshake == NULL )
-        {
-            MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
-            return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
-        }
-
-        ssl->out_msg[1] = (unsigned char)( ( len - 4 ) >> 16 );
-        ssl->out_msg[2] = (unsigned char)( ( len - 4 ) >>  8 );
-        ssl->out_msg[3] = (unsigned char)( ( len - 4 )       );
+        ssl->out_msg[1] = (unsigned char)( hs_len >> 16 );
+        ssl->out_msg[2] = (unsigned char)( hs_len >>  8 );
+        ssl->out_msg[3] = (unsigned char)( hs_len       );
 
         /*
          * DTLS has additional fields in the Handshake layer,
@@ -2980,17 +3099,16 @@
             {
                 MBEDTLS_SSL_DEBUG_MSG( 1, ( "DTLS handshake message too large: "
                               "size %u, maximum %u",
-                               (unsigned) ( ssl->in_hslen - 4 ),
+                               (unsigned) ( hs_len ),
                                (unsigned) ( MBEDTLS_SSL_OUT_CONTENT_LEN - 12 ) ) );
                 return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
             }
 
-            memmove( ssl->out_msg + 12, ssl->out_msg + 4, len - 4 );
+            memmove( ssl->out_msg + 12, ssl->out_msg + 4, hs_len );
             ssl->out_msglen += 8;
-            len += 8;
 
             /* Write message_seq and update it, except for HelloRequest */
-            if( out_msg_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
+            if( hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
             {
                 ssl->out_msg[4] = ( ssl->handshake->out_msg_seq >> 8 ) & 0xFF;
                 ssl->out_msg[5] = ( ssl->handshake->out_msg_seq      ) & 0xFF;
@@ -3002,23 +3120,22 @@
                 ssl->out_msg[5] = 0;
             }
 
-            /* We don't fragment, so frag_offset = 0 and frag_len = len */
+            /* Handshake hashes are computed without fragmentation,
+             * so set frag_offset = 0 and frag_len = hs_len for now */
             memset( ssl->out_msg + 6, 0x00, 3 );
             memcpy( ssl->out_msg + 9, ssl->out_msg + 1, 3 );
         }
 #endif /* MBEDTLS_SSL_PROTO_DTLS */
 
-        if( out_msg_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
-            ssl->handshake->update_checksum( ssl, ssl->out_msg, len );
+        /* Update running hashes of hanshake messages seen */
+        if( hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
+            ssl->handshake->update_checksum( ssl, ssl->out_msg, ssl->out_msglen );
     }
 
-    /* Save handshake and CCS messages for resending */
+    /* Either send now, or just save to be sent (and resent) later */
 #if defined(MBEDTLS_SSL_PROTO_DTLS)
     if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
-        ssl->handshake != NULL &&
-        ssl->handshake->retransmit_state != MBEDTLS_SSL_RETRANS_SENDING &&
-        ( ssl->out_msgtype == MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC ||
-          ssl->out_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE ) )
+        hs_type != MBEDTLS_SSL_HS_HELLO_REQUEST )
     {
         if( ( ret = ssl_flight_append( ssl ) ) != 0 )
         {
@@ -3026,7 +3143,39 @@
             return( ret );
         }
     }
+    else
 #endif
+    {
+        if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+        {
+            MBEDTLS_SSL_DEBUG_RET( 1, "ssl_write_record", ret );
+            return( ret );
+        }
+    }
+
+    MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write handshake message" ) );
+
+    return( 0 );
+}
+
+/*
+ * Record layer functions
+ */
+
+/*
+ * Write current record.
+ *
+ * Uses:
+ *  - ssl->out_msgtype: type of the message (AppData, Handshake, Alert, CCS)
+ *  - ssl->out_msglen: length of the record content (excl headers)
+ *  - ssl->out_msg: record content
+ */
+int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl )
+{
+    int ret, done = 0;
+    size_t len = ssl->out_msglen;
+
+    MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write record" ) );
 
 #if defined(MBEDTLS_ZLIB_SUPPORT)
     if( ssl->transform_out != NULL &&
@@ -4542,9 +4691,9 @@
 
     ssl->state++;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
@@ -4955,9 +5104,9 @@
 
     ssl->state++;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
@@ -5583,12 +5732,21 @@
         mbedtls_ssl_send_flight_completed( ssl );
 #endif
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+    if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
+        ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
+        return( ret );
+    }
+#endif
+
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write finished" ) );
 
     return( 0 );
@@ -5973,6 +6131,9 @@
     ssl->transform_in = NULL;
     ssl->transform_out = NULL;
 
+    ssl->session_in = NULL;
+    ssl->session_out = NULL;
+
     memset( ssl->out_buf, 0, MBEDTLS_SSL_OUT_BUFFER_LEN );
     if( partial == 0 )
         memset( ssl->in_buf, 0, MBEDTLS_SSL_IN_BUFFER_LEN );
@@ -6597,6 +6758,13 @@
 }
 #endif
 
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+void mbedtls_ssl_conf_mtu( mbedtls_ssl_config *conf, uint16_t mtu )
+{
+    conf->mtu = mtu;
+}
+#endif
+
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
 int mbedtls_ssl_conf_max_frag_len( mbedtls_ssl_config *conf, unsigned char mfl_code )
 {
@@ -6841,26 +7009,48 @@
 {
     size_t transform_expansion;
     const mbedtls_ssl_transform *transform = ssl->transform_out;
+    unsigned block_size;
+
+    if( transform == NULL )
+        return( (int) mbedtls_ssl_hdr_len( ssl ) );
 
 #if defined(MBEDTLS_ZLIB_SUPPORT)
     if( ssl->session_out->compression != MBEDTLS_SSL_COMPRESS_NULL )
         return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+    }
 #endif
 
-    if( transform == NULL )
-        return( (int) mbedtls_ssl_hdr_len( ssl ) );
-
     switch( mbedtls_cipher_get_cipher_mode( &transform->cipher_ctx_enc ) )
     {
         case MBEDTLS_MODE_GCM:
         case MBEDTLS_MODE_CCM:
+        case MBEDTLS_MODE_CHACHAPOLY:
         case MBEDTLS_MODE_STREAM:
             transform_expansion = transform->minlen;
             break;
 
         case MBEDTLS_MODE_CBC:
-            transform_expansion = transform->maclen
-                      + mbedtls_cipher_get_block_size( &transform->cipher_ctx_enc );
+
+            block_size = mbedtls_cipher_get_block_size(
+                &transform->cipher_ctx_enc );
+
+#if defined(MBEDTLS_SSL_PROTO_TLS1_1) || defined(MBEDTLS_SSL_PROTO_TLS1_2)
+            if( ssl->minor_ver >= MBEDTLS_SSL_MINOR_VERSION_2 )
+            {
+                /* Expansion due to addition of
+                 * - MAC
+                 * - CBC padding (theoretically up to 256 bytes, but
+                 *                we never use more than block_size)
+                 * - explicit IV
+                 */
+                transform_expansion = transform->maclen + 2 * block_size;
+            }
+            else
+#endif /* MBEDTLS_SSL_PROTO_TLS1_1 || MBEDTLS_SSL_PROTO_TLS1_2 */
+            {
+                /* No explicit IV prior to TLS 1.1. */
+                transform_expansion = transform->maclen + block_size;
+            }
             break;
 
         default:
@@ -6881,19 +7071,59 @@
      */
     max_len = ssl_mfl_code_to_length( ssl->conf->mfl_code );
 
-    /*
-     * Check if a smaller max length was negotiated
-     */
+    /* Check if a smaller max length was negotiated */
     if( ssl->session_out != NULL &&
         ssl_mfl_code_to_length( ssl->session_out->mfl_code ) < max_len )
     {
         max_len = ssl_mfl_code_to_length( ssl->session_out->mfl_code );
     }
 
-    return max_len;
+    /* During a handshake, use the value being negotiated */
+    if( ssl->session_negotiate != NULL &&
+        ssl_mfl_code_to_length( ssl->session_negotiate->mfl_code ) < max_len )
+    {
+        max_len = ssl_mfl_code_to_length( ssl->session_negotiate->mfl_code );
+    }
+
+    return( max_len );
 }
 #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
 
+int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl )
+{
+    size_t max_len = MBEDTLS_SSL_OUT_CONTENT_LEN;
+
+#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
+    const size_t mfl = mbedtls_ssl_get_max_frag_len( ssl );
+
+    if( max_len > mfl )
+        max_len = mfl;
+#endif
+
+#if defined(MBEDTLS_SSL_PROTO_DTLS)
+    if( ssl->conf->mtu != 0 )
+    {
+        const size_t mtu = ssl->conf->mtu;
+        const int ret = mbedtls_ssl_get_record_expansion( ssl );
+        const size_t overhead = (size_t) ret;
+
+        if( ret < 0 )
+            return( ret );
+
+        if( mtu <= overhead )
+        {
+            MBEDTLS_SSL_DEBUG_MSG( 1, ( "MTU too low for record expansion" ) );
+            return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+        }
+
+        if( max_len > mtu - overhead )
+            max_len = mtu - overhead;
+    }
+#endif
+
+    return( (int) max_len );
+}
+
 #if defined(MBEDTLS_X509_CRT_PARSE_C)
 const mbedtls_x509_crt *mbedtls_ssl_get_peer_cert( const mbedtls_ssl_context *ssl )
 {
@@ -6981,9 +7211,9 @@
     ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE;
     ssl->out_msg[0]  = MBEDTLS_SSL_HS_HELLO_REQUEST;
 
-    if( ( ret = mbedtls_ssl_write_record( ssl ) ) != 0 )
+    if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
     {
-        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_record", ret );
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
         return( ret );
     }
 
@@ -7148,7 +7378,7 @@
         if( ssl->handshake != NULL &&
             ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
         {
-            if( ( ret = mbedtls_ssl_resend( ssl ) ) != 0 )
+            if( ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
                 return( ret );
         }
     }
@@ -7445,12 +7675,15 @@
 static int ssl_write_real( mbedtls_ssl_context *ssl,
                            const unsigned char *buf, size_t len )
 {
-    int ret;
-#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
-    size_t max_len = mbedtls_ssl_get_max_frag_len( ssl );
-#else
-    size_t max_len = MBEDTLS_SSL_OUT_CONTENT_LEN;
-#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
+    int ret = mbedtls_ssl_get_max_out_record_payload( ssl );
+    const size_t max_len = (size_t) ret;
+
+    if( ret < 0 )
+    {
+        MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_get_max_out_record_payload", ret );
+        return( ret );
+    }
+
     if( len > max_len )
     {
 #if defined(MBEDTLS_SSL_PROTO_DTLS)
diff --git a/programs/ssl/ssl_client2.c b/programs/ssl/ssl_client2.c
index 0dd9e3f..7cdc53a 100644
--- a/programs/ssl/ssl_client2.c
+++ b/programs/ssl/ssl_client2.c
@@ -106,6 +106,7 @@
 #define DFL_TRANSPORT           MBEDTLS_SSL_TRANSPORT_STREAM
 #define DFL_HS_TO_MIN           0
 #define DFL_HS_TO_MAX           0
+#define DFL_DTLS_MTU            -1
 #define DFL_FALLBACK            -1
 #define DFL_EXTENDED_MS         -1
 #define DFL_ETM                 -1
@@ -198,7 +199,8 @@
 #define USAGE_DTLS \
     "    dtls=%%d             default: 0 (TLS)\n"                           \
     "    hs_timeout=%%d-%%d    default: (library default: 1000-60000)\n"    \
-    "                        range of DTLS handshake timeouts in millisecs\n"
+    "                        range of DTLS handshake timeouts in millisecs\n" \
+    "    mtu=%%d              default: (library default: unlimited)\n"
 #else
 #define USAGE_DTLS ""
 #endif
@@ -345,6 +347,7 @@
     int transport;              /* TLS or DTLS?                             */
     uint32_t hs_to_min;         /* Initial value of DTLS handshake timer    */
     uint32_t hs_to_max;         /* Max value of DTLS handshake timer        */
+    int dtls_mtu;               /* UDP Maximum tranport unit for DTLS       */
     int fallback;               /* is this a fallback connection?           */
     int extended_ms;            /* negotiate extended master secret?        */
     int etm;                    /* negotiate encrypt then mac?              */
@@ -617,6 +620,7 @@
     opt.transport           = DFL_TRANSPORT;
     opt.hs_to_min           = DFL_HS_TO_MIN;
     opt.hs_to_max           = DFL_HS_TO_MAX;
+    opt.dtls_mtu            = DFL_DTLS_MTU;
     opt.fallback            = DFL_FALLBACK;
     opt.extended_ms         = DFL_EXTENDED_MS;
     opt.etm                 = DFL_ETM;
@@ -927,6 +931,12 @@
             if( opt.hs_to_min == 0 || opt.hs_to_max < opt.hs_to_min )
                 goto usage;
         }
+        else if( strcmp( p, "mtu" ) == 0 )
+        {
+            opt.dtls_mtu = atoi( q );
+            if( opt.dtls_mtu < 0 )
+                goto usage;
+        }
         else if( strcmp( p, "recsplit" ) == 0 )
         {
             opt.recsplit = atoi( q );
@@ -1327,6 +1337,9 @@
     if( opt.hs_to_min != DFL_HS_TO_MIN || opt.hs_to_max != DFL_HS_TO_MAX )
         mbedtls_ssl_conf_handshake_timeout( &conf, opt.hs_to_min,
                                             opt.hs_to_max );
+
+    if( opt.dtls_mtu != DFL_DTLS_MTU )
+        mbedtls_ssl_conf_mtu( &conf, opt.dtls_mtu );
 #endif /* MBEDTLS_SSL_PROTO_DTLS */
 
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
diff --git a/programs/ssl/ssl_server2.c b/programs/ssl/ssl_server2.c
index 7654a64..484f84f 100644
--- a/programs/ssl/ssl_server2.c
+++ b/programs/ssl/ssl_server2.c
@@ -150,6 +150,7 @@
 #define DFL_ANTI_REPLAY         -1
 #define DFL_HS_TO_MIN           0
 #define DFL_HS_TO_MAX           0
+#define DFL_DTLS_MTU            -1
 #define DFL_BADMAC_LIMIT        -1
 #define DFL_EXTENDED_MS         -1
 #define DFL_ETM                 -1
@@ -297,7 +298,8 @@
 #define USAGE_DTLS \
     "    dtls=%%d             default: 0 (TLS)\n"                           \
     "    hs_timeout=%%d-%%d    default: (library default: 1000-60000)\n"    \
-    "                        range of DTLS handshake timeouts in millisecs\n"
+    "                        range of DTLS handshake timeouts in millisecs\n" \
+    "    mtu=%%d              default: (library default: unlimited)\n"
 #else
 #define USAGE_DTLS ""
 #endif
@@ -470,6 +472,7 @@
     int anti_replay;            /* Use anti-replay for DTLS? -1 for default */
     uint32_t hs_to_min;         /* Initial value of DTLS handshake timer    */
     uint32_t hs_to_max;         /* Max value of DTLS handshake timer        */
+    int dtls_mtu;               /* UDP Maximum tranport unit for DTLS       */
     int badmac_limit;           /* Limit of records with bad MAC            */
 } opt;
 
@@ -1338,6 +1341,7 @@
     opt.anti_replay         = DFL_ANTI_REPLAY;
     opt.hs_to_min           = DFL_HS_TO_MIN;
     opt.hs_to_max           = DFL_HS_TO_MAX;
+    opt.dtls_mtu            = DFL_DTLS_MTU;
     opt.badmac_limit        = DFL_BADMAC_LIMIT;
     opt.extended_ms         = DFL_EXTENDED_MS;
     opt.etm                 = DFL_ETM;
@@ -1684,6 +1688,12 @@
             if( opt.hs_to_min == 0 || opt.hs_to_max < opt.hs_to_min )
                 goto usage;
         }
+        else if( strcmp( p, "mtu" ) == 0 )
+        {
+            opt.dtls_mtu = atoi( q );
+            if( opt.dtls_mtu < 0 )
+                goto usage;
+        }
         else if( strcmp( p, "sni" ) == 0 )
         {
             opt.sni = q;
@@ -2155,6 +2165,9 @@
 #if defined(MBEDTLS_SSL_PROTO_DTLS)
     if( opt.hs_to_min != DFL_HS_TO_MIN || opt.hs_to_max != DFL_HS_TO_MAX )
         mbedtls_ssl_conf_handshake_timeout( &conf, opt.hs_to_min, opt.hs_to_max );
+
+    if( opt.dtls_mtu != DFL_DTLS_MTU )
+        mbedtls_ssl_conf_mtu( &conf, opt.dtls_mtu );
 #endif /* MBEDTLS_SSL_PROTO_DTLS */
 
 #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index 937a27b..397c565 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -4877,6 +4877,382 @@
             -c "found fragmented DTLS handshake message" \
             -C "error"
 
+# Tests for sending fragmented handshake messages with DTLS
+#
+# Use client auth when we need the client to send large messages,
+# and use large cert chains on both sides too (the long chains we have all use
+# both RSA and ECDSA, but ideally we should have long chains with either).
+# Sizes reached (UDP payload):
+# - 2037B for server certificate
+# - 1542B for client certificate
+# - 1013B for newsessionticket
+# - all others below 512B
+# All those tests assume MAX_CONTENT_LEN is at least 2048
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test    "DTLS fragmenting: none (for reference)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             max_frag_len=2048" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             max_frag_len=2048" \
+            0 \
+            -S "found fragmented DTLS handshake message" \
+            -C "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test    "DTLS fragmenting: server only (max_frag_len)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             max_frag_len=1024" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             max_frag_len=2048" \
+            0 \
+            -S "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test    "DTLS fragmenting: server only (more) (max_frag_len)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             max_frag_len=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             max_frag_len=2048" \
+            0 \
+            -S "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test    "DTLS fragmenting: client-initiated, server only (max_frag_len)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=none \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             max_frag_len=2048" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             max_frag_len=512" \
+            0 \
+            -S "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_test    "DTLS fragmenting: client-initiated, both (max_frag_len)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             max_frag_len=2048" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             max_frag_len=512" \
+            0 \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test    "DTLS fragmenting: none (for reference) (MTU)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             mtu=2048" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             mtu=2048" \
+            0 \
+            -S "found fragmented DTLS handshake message" \
+            -C "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test    "DTLS fragmenting: client (MTU)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             mtu=2048" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             mtu=512" \
+            0 \
+            -s "found fragmented DTLS handshake message" \
+            -C "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test    "DTLS fragmenting: server (MTU)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             mtu=2048" \
+            0 \
+            -S "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test    "DTLS fragmenting: both (MTU)" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             mtu=512" \
+            0 \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+# the proxy shouldn't drop or mess up anything, so we shouldn't need to resend
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test    "DTLS fragmenting: proxy MTU, simple handshake" \
+            -p "$P_PXY mtu=512" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             mtu=512" \
+            0 \
+            -S "resend" \
+            -C "resend" \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+# This ensures things still work after session_reset(),
+# for example it would have caught #1941.
+# It also exercises the "resumed hanshake" flow.
+# Since we don't support reading fragmented ClientHello yet,
+# up the MTU to 1450 (larger than ClientHello with session ticket,
+# but still smaller than client's Certificate to ensure fragmentation).
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+run_test    "DTLS fragmenting: proxy MTU, resumed handshake" \
+            -p "$P_PXY mtu=1450" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             mtu=1450" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             mtu=1450 reconnect=1" \
+            0 \
+            -S "resend" \
+            -C "resend" \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_CHACHAPOLY_C
+run_test    "DTLS fragmenting: proxy MTU, ChachaPoly renego" \
+            -p "$P_PXY mtu=512" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             exchanges=2 renegotiation=1 \
+             force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             exchanges=2 renegotiation=1 renegotiate=1 \
+             mtu=512" \
+            0 \
+            -S "resend" \
+            -C "resend" \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_GCM_C
+run_test    "DTLS fragmenting: proxy MTU, AES-GCM renego" \
+            -p "$P_PXY mtu=512" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             exchanges=2 renegotiation=1 \
+             force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             exchanges=2 renegotiation=1 renegotiate=1 \
+             mtu=512" \
+            0 \
+            -S "resend" \
+            -C "resend" \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_CCM_C
+run_test    "DTLS fragmenting: proxy MTU, AES-CCM renego" \
+            -p "$P_PXY mtu=512" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             exchanges=2 renegotiation=1 \
+             force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             exchanges=2 renegotiation=1 renegotiate=1 \
+             mtu=512" \
+            0 \
+            -S "resend" \
+            -C "resend" \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
+requires_config_enabled MBEDTLS_SSL_ENCRYPT_THEN_MAC
+run_test    "DTLS fragmenting: proxy MTU, AES-CBC EtM renego" \
+            -p "$P_PXY mtu=512" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             exchanges=2 renegotiation=1 \
+             force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             exchanges=2 renegotiation=1 renegotiate=1 \
+             mtu=512" \
+            0 \
+            -S "resend" \
+            -C "resend" \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+requires_config_enabled MBEDTLS_SHA256_C
+requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
+requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_AES_C
+requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
+run_test    "DTLS fragmenting: proxy MTU, AES-CBC non-EtM renego" \
+            -p "$P_PXY mtu=512" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             exchanges=2 renegotiation=1 \
+             force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 etm=0 \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             exchanges=2 renegotiation=1 renegotiate=1 \
+             mtu=512" \
+            0 \
+            -S "resend" \
+            -C "resend" \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
+requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_RSA_C
+requires_config_enabled MBEDTLS_ECDSA_C
+client_needs_more_time 2
+run_test    "DTLS fragmenting: proxy MTU + 3d" \
+            -p "$P_PXY mtu=512 drop=8 delay=8 duplicate=8" \
+            "$P_SRV dtls=1 debug_level=2 auth_mode=required \
+             crt_file=data_files/server7_int-ca.crt \
+             key_file=data_files/server7.key \
+             mtu=512" \
+            "$P_CLI dtls=1 debug_level=2 \
+             crt_file=data_files/server8_int-ca2.crt \
+             key_file=data_files/server8.key \
+             mtu=512" \
+            0 \
+            -s "found fragmented DTLS handshake message" \
+            -c "found fragmented DTLS handshake message" \
+            -C "error"
+
 # Tests for specific things with "unreliable" UDP connection
 
 not_with_valgrind # spurious resend due to timeout