| /** |
| * \file blowfish.h |
| * |
| * \brief Blowfish block cipher |
| */ |
| /* |
| * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * This file is part of mbed TLS (https://tls.mbed.org) |
| */ |
| #ifndef MBEDTLS_BLOWFISH_H |
| #define MBEDTLS_BLOWFISH_H |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #include <stddef.h> |
| #include <stdint.h> |
| |
| #include "platform_util.h" |
| |
| #define MBEDTLS_BLOWFISH_ENCRYPT 1 |
| #define MBEDTLS_BLOWFISH_DECRYPT 0 |
| #define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448 |
| #define MBEDTLS_BLOWFISH_MIN_KEY_BITS 32 |
| #define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */ |
| #define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */ |
| |
| #if !defined(MBEDTLS_DEPRECATED_REMOVED) |
| #define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0016 ) |
| #endif /* !MBEDTLS_DEPRECATED_REMOVED */ |
| #define MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA -0x0016 /**< Bad input data. */ |
| |
| #define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */ |
| |
| /* MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED is deprecated and should not be used. |
| */ |
| #define MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED -0x0017 /**< Blowfish hardware accelerator failed. */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if !defined(MBEDTLS_BLOWFISH_ALT) |
| // Regular implementation |
| // |
| |
| /** |
| * \brief Blowfish context structure |
| */ |
| typedef struct mbedtls_blowfish_context |
| { |
| uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */ |
| uint32_t S[4][256]; /*!< key dependent S-boxes */ |
| } |
| mbedtls_blowfish_context; |
| |
| #else /* MBEDTLS_BLOWFISH_ALT */ |
| #include "blowfish_alt.h" |
| #endif /* MBEDTLS_BLOWFISH_ALT */ |
| |
| /** |
| * \brief Initialize a Blowfish context. |
| * |
| * \param ctx The Blowfish context to be initialized. |
| * This must not be \c NULL. |
| */ |
| void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx ); |
| |
| /** |
| * \brief Clear a Blowfish context. |
| * |
| * \param ctx The Blowfish context to be cleared. |
| * This may be \c NULL, in which case this function |
| * returns immediately. If it is not \c NULL, it must |
| * point to an initialized Blowfish context. |
| */ |
| void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx ); |
| |
| /** |
| * \brief Perform a Blowfish key schedule operation. |
| * |
| * \param ctx The Blowfish context to perform the key schedule on. |
| * \param key The encryption key. This must be a readable buffer of |
| * length \p keybits Bits. |
| * \param keybits The length of \p key in Bits. This must be between |
| * \c 32 and \c 448 and a multiple of \c 8. |
| * |
| * \return \c 0 if successful. |
| * \return A negative error code on failure. |
| */ |
| int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key, |
| unsigned int keybits ); |
| |
| /** |
| * \brief Perform a Blowfish-ECB block encryption/decryption operation. |
| * |
| * \param ctx The Blowfish context to use. This must be initialized |
| * and bound to a key. |
| * \param mode The mode of operation. Possible values are |
| * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or |
| * #MBEDTLS_BLOWFISH_DECRYPT for decryption. |
| * \param input The input block. This must be a readable buffer |
| * of size \c 8 Bytes. |
| * \param output The output block. This must be a writable buffer |
| * of size \c 8 Bytes. |
| * |
| * \return \c 0 if successful. |
| * \return A negative error code on failure. |
| */ |
| int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx, |
| int mode, |
| const unsigned char input[MBEDTLS_BLOWFISH_BLOCKSIZE], |
| unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] ); |
| |
| #if defined(MBEDTLS_CIPHER_MODE_CBC) |
| /** |
| * \brief Perform a Blowfish-CBC buffer encryption/decryption operation. |
| * |
| * \note Upon exit, the content of the IV is updated so that you can |
| * call the function same function again on the following |
| * block(s) of data and get the same result as if it was |
| * encrypted in one call. This allows a "streaming" usage. |
| * If on the other hand you need to retain the contents of the |
| * IV, you should either save it manually or use the cipher |
| * module instead. |
| * |
| * \param ctx The Blowfish context to use. This must be initialized |
| * and bound to a key. |
| * \param mode The mode of operation. Possible values are |
| * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or |
| * #MBEDTLS_BLOWFISH_DECRYPT for decryption. |
| * \param length The length of the input data in Bytes. This must be |
| * multiple of \c 8. |
| * \param iv The initialization vector. This must be a read/write buffer |
| * of length \c 8 Bytes. It is updated by this function. |
| * \param input The input data. This must be a readable buffer of length |
| * \p length Bytes. |
| * \param output The output data. This must be a writable buffer of length |
| * \p length Bytes. |
| * |
| * \return \c 0 if successful. |
| * \return A negative error code on failure. |
| */ |
| int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx, |
| int mode, |
| size_t length, |
| unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE], |
| const unsigned char *input, |
| unsigned char *output ); |
| #endif /* MBEDTLS_CIPHER_MODE_CBC */ |
| |
| #if defined(MBEDTLS_CIPHER_MODE_CFB) |
| /** |
| * \brief Perform a Blowfish CFB buffer encryption/decryption operation. |
| * |
| * \note Upon exit, the content of the IV is updated so that you can |
| * call the function same function again on the following |
| * block(s) of data and get the same result as if it was |
| * encrypted in one call. This allows a "streaming" usage. |
| * If on the other hand you need to retain the contents of the |
| * IV, you should either save it manually or use the cipher |
| * module instead. |
| * |
| * \param ctx The Blowfish context to use. This must be initialized |
| * and bound to a key. |
| * \param mode The mode of operation. Possible values are |
| * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or |
| * #MBEDTLS_BLOWFISH_DECRYPT for decryption. |
| * \param length The length of the input data in Bytes. |
| * \param iv_off The offset in the initialiation vector. |
| * The value pointed to must be smaller than \c 8 Bytes. |
| * It is updated by this function to support the aforementioned |
| * streaming usage. |
| * \param iv The initialization vector. This must be a read/write buffer |
| * of size \c 8 Bytes. It is updated after use. |
| * \param input The input data. This must be a readable buffer of length |
| * \p length Bytes. |
| * \param output The output data. This must be a writable buffer of length |
| * \p length Bytes. |
| * |
| * \return \c 0 if successful. |
| * \return A negative error code on failure. |
| */ |
| int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx, |
| int mode, |
| size_t length, |
| size_t *iv_off, |
| unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE], |
| const unsigned char *input, |
| unsigned char *output ); |
| #endif /*MBEDTLS_CIPHER_MODE_CFB */ |
| |
| #if defined(MBEDTLS_CIPHER_MODE_CTR) |
| /** |
| * \brief Perform a Blowfish-CTR buffer encryption/decryption operation. |
| * |
| * \warning You must never reuse a nonce value with the same key. Doing so |
| * would void the encryption for the two messages encrypted with |
| * the same nonce and key. |
| * |
| * There are two common strategies for managing nonces with CTR: |
| * |
| * 1. You can handle everything as a single message processed over |
| * successive calls to this function. In that case, you want to |
| * set \p nonce_counter and \p nc_off to 0 for the first call, and |
| * then preserve the values of \p nonce_counter, \p nc_off and \p |
| * stream_block across calls to this function as they will be |
| * updated by this function. |
| * |
| * With this strategy, you must not encrypt more than 2**64 |
| * blocks of data with the same key. |
| * |
| * 2. You can encrypt separate messages by dividing the \p |
| * nonce_counter buffer in two areas: the first one used for a |
| * per-message nonce, handled by yourself, and the second one |
| * updated by this function internally. |
| * |
| * For example, you might reserve the first 4 bytes for the |
| * per-message nonce, and the last 4 bytes for internal use. In that |
| * case, before calling this function on a new message you need to |
| * set the first 4 bytes of \p nonce_counter to your chosen nonce |
| * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p |
| * stream_block to be ignored). That way, you can encrypt at most |
| * 2**32 messages of up to 2**32 blocks each with the same key. |
| * |
| * The per-message nonce (or information sufficient to reconstruct |
| * it) needs to be communicated with the ciphertext and must be unique. |
| * The recommended way to ensure uniqueness is to use a message |
| * counter. |
| * |
| * Note that for both stategies, sizes are measured in blocks and |
| * that a Blowfish block is 8 bytes. |
| * |
| * \warning Upon return, \p stream_block contains sensitive data. Its |
| * content must not be written to insecure storage and should be |
| * securely discarded as soon as it's no longer needed. |
| * |
| * \param ctx The Blowfish context to use. This must be initialized |
| * and bound to a key. |
| * \param length The length of the input data in Bytes. |
| * \param nc_off The offset in the current stream_block (for resuming |
| * within current cipher stream). The offset pointer |
| * should be \c 0 at the start of a stream and must be |
| * smaller than \c 8. It is updated by this function. |
| * \param nonce_counter The 64-bit nonce and counter. This must point to a |
| * read/write buffer of length \c 8 Bytes. |
| * \param stream_block The saved stream-block for resuming. This must point to |
| * a read/write buffer of length \c 8 Bytes. |
| * \param input The input data. This must be a readable buffer of |
| * length \p length Bytes. |
| * \param output The output data. This must be a writable buffer of |
| * length \p length Bytes. |
| * |
| * \return \c 0 if successful. |
| * \return A negative error code on failure. |
| */ |
| int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx, |
| size_t length, |
| size_t *nc_off, |
| unsigned char nonce_counter[MBEDTLS_BLOWFISH_BLOCKSIZE], |
| unsigned char stream_block[MBEDTLS_BLOWFISH_BLOCKSIZE], |
| const unsigned char *input, |
| unsigned char *output ); |
| #endif /* MBEDTLS_CIPHER_MODE_CTR */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* blowfish.h */ |