inc/qcbor/UsefulBuf.h

/*============================================================================
 Copyright (c) 2016-2018, The Linux Foundation.
 Copyright (c) 2018-2022, Laurence Lundblade.
 Copyright (c) 2021, Arm Limited. All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
    * Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above
      copyright notice, this list of conditions and the following
      disclaimer in the documentation and/or other materials provided
      with the distribution.
    * Neither the name of The Linux Foundation nor the names of its
      contributors, nor the name "Laurence Lundblade" may be used to
      endorse or promote products derived from this software without
      specific prior written permission.

THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 =============================================================================*/

/*============================================================================
 FILE:  UsefulBuf.h

 DESCRIPTION:  General purpose input and output buffers

 EDIT HISTORY FOR FILE:

 This section contains comments describing changes made to the module.
 Notice that changes are listed in reverse chronological order.

 when         who             what, where, why
 --------     ----            --------------------------------------------------
 4/11/2022    llundblade      Add GetOutPlace and Advance to UsefulOutBuf.
 9/21/2021    llundbla        Clarify UsefulOutBuf size calculation mode
 8/8/2021     dthaler/llundbla Work with C++ without compiler extensions
 5/11/2021    llundblade      Improve comments and comment formatting.
 3/6/2021     mcr/llundblade  Fix warnings related to --Wcast-qual
 2/17/2021    llundblade      Add method to go from a pointer to an offset.
 1/25/2020    llundblade      Add some casts so static anlyzers don't complain.
 5/21/2019    llundblade      #define configs for efficient endianness handling.
 5/16/2019    llundblade      Add UsefulOutBuf_IsBufferNULL().
 3/23/2019    llundblade      Big documentation & style update. No interface
                              change.
 3/6/2019     llundblade      Add UsefulBuf_IsValue()
 12/17/2018   llundblade      Remove const from UsefulBuf and UsefulBufC .len
 12/13/2018   llundblade      Documentation improvements
 09/18/2018   llundblade      Cleaner distinction between UsefulBuf and
                              UsefulBufC.
 02/02/18     llundbla        Full support for integers in and out; fix pointer
                              alignment bug. Incompatible change: integers
                              in/out are now in network byte order.
 08/12/17     llundbla        Added UsefulOutBuf_AtStart and UsefulBuf_Find
 06/27/17     llundbla        Fix UsefulBuf_Compare() bug. Only affected
                              comparison for < or > for unequal length buffers.
                              Added UsefulBuf_Set() function.
 05/30/17     llundbla        Functions for NULL UsefulBufs and const / unconst
 11/13/16     llundbla        Initial Version.

 =============================================================================*/

#ifndef _UsefulBuf_h
#define _UsefulBuf_h


/*
 * Endianness Configuration
 *
 * This code is written so it will work correctly on big- and
 * little-endian CPUs without configuration or any auto-detection of
 * endianness. All code here will run correctly regardless of the
 * endianness of the CPU it is running on.
 *
 * There are four C preprocessor macros that can be set with #define
 * to explicitly configure endianness handling. Setting them can
 * reduce code size a little and improve efficiency a little.
 *
 * Note that most of QCBOR is unaffected by this configuration.  Its
 * endianness handling is integrated with the code that handles
 * alignment and preferred serialization. This configuration does
 * affect QCBOR's (planned) implementation of integer arrays (tagged
 * arrays) and use of the functions here to serialize or deserialize
 * integers and floating-point values.
 *
 * Following is the recipe for configuring the endianness-related
 * #defines.
 *
 * The first option is to not define anything. This will work fine
 * with all CPUs, OS's and compilers. The code for encoding integers
 * may be a little larger and slower.
 *
 * If your CPU is big-endian then define
 * USEFULBUF_CONFIG_BIG_ENDIAN. This will give the most efficient code
 * for big-endian CPUs. It will be small and efficient because there
 * will be no byte swapping.
 *
 * Try defining USEFULBUF_CONFIG_HTON. This will work on most CPUs,
 * OS's and compilers, but not all. On big-endian CPUs this should
 * give the most efficient code, the same as
 * USEFULBUF_CONFIG_BIG_ENDIAN does. On little-endian CPUs it should
 * call the system-defined byte swapping method which is presumably
 * implemented efficiently. In some cases, this will be a dedicated
 * byte swap instruction like Intel's bswap.
 *
 * If USEFULBUF_CONFIG_HTON works and you know your CPU is
 * little-endian, it is also good to define
 * USEFULBUF_CONFIG_LITTLE_ENDIAN.
 *
 * if USEFULBUF_CONFIG_HTON doesn't work and you know your system is
 * little-endian, try defining both USEFULBUF_CONFIG_LITTLE_ENDIAN and
 * USEFULBUF_CONFIG_BSWAP. This should call the most efficient
 * system-defined byte swap method. However, note
 * https://hardwarebug.org/2010/01/14/beware-the-builtins/.  Perhaps
 * this is fixed now. Often hton() and ntoh() will call the built-in
 * __builtin_bswapXX()() function, so this size issue could affect
 * USEFULBUF_CONFIG_HTON.
 *
 * Last, run the tests. They must all pass.
 *
 * These #define config options affect the inline implementation of
 * UsefulOutBuf_InsertUint64() and UsefulInputBuf_GetUint64().  They
 * also affect the 16-, 32-bit, float and double versions of these
 * functions. Since they are inline, the size effect is not in the
 * UsefulBuf object code, but in the calling code.
 *
 * Summary:
 *   USEFULBUF_CONFIG_BIG_ENDIAN -- Force configuration to big-endian.
 *   USEFULBUF_CONFIG_LITTLE_ENDIAN -- Force to little-endian.
 *   USEFULBUF_CONFIG_HTON -- Use hton(), htonl(), ntohl()... to
 *     handle big and little-endian with system option.
 *   USEFULBUF_CONFIG_BSWAP -- With USEFULBUF_CONFIG_LITTLE_ENDIAN,
 *     use __builtin_bswapXX().
 *
 * It is possible to run this code in environments where using floating point is
 * not allowed. Defining USEFULBUF_DISABLE_ALL_FLOAT will disable all the code
 * that is related to handling floating point types, along with related
 * interfaces. This makes it possible to compile the code with the compile
 * option -mgeneral-regs-only.
 */

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN) && defined(USEFULBUF_CONFIG_LITTLE_ENDIAN)
#error "Cannot define both USEFULBUF_CONFIG_BIG_ENDIAN and USEFULBUF_CONFIG_LITTLE_ENDIAN"
#endif


#include <stdint.h> /* for uint8_t, uint16_t.... */
#include <string.h> /* for strlen, memcpy, memmove, memset */
#include <stddef.h> /* for size_t */


#ifdef USEFULBUF_CONFIG_HTON
#include <arpa/inet.h> /* for htons, htonl, htonll, ntohs... */
#endif

#ifdef __cplusplus
extern "C" {
#if 0
} /* Keep editor indention formatting happy */
#endif
#endif

/**
 * @file UsefulBuf.h
 *
 * The goal of this code is to make buffer and pointer manipulation
 * easier and safer when working with binary data.
 *
 * The @ref UsefulBuf, @ref UsefulOutBuf and @ref UsefulInputBuf
 * structures are used to represent buffers rather than ad hoc
 * pointers and lengths.
 *
 * With these it is possible to write code that does little or no
 * direct pointer manipulation for copying and formatting data. For
 * example, the QCBOR encoder was written using these and has less
 * pointer manipulation.
 *
 * While it is true that object code using these functions will be a
 * little larger and slower than a white-knuckle clever use of
 * pointers might be, but not by that much or enough to have an effect
 * for most use cases. For security-oriented code this is highly
 * worthwhile. Clarity, simplicity, reviewability and are more
 * important.
 *
 * There are some extra sanity and double checks in this code to help
 * catch coding errors and simple memory corruption. They are helpful,
 * but not a substitute for proper code review, input validation and
 * such.
 *
 * This code consists of a lot of inline functions and a few that are
 * not.  It should not generate very much object code, especially with
 * the optimizer turned up to @c -Os or @c -O3.
 */


/**
 * @ref UsefulBufC and @ref UsefulBuf are simple data structures to
 * hold a pointer and length for binary data.  In C99 this data
 * structure can be passed on the stack making a lot of code cleaner
 * than carrying around a pointer and length as two parameters.
 *
 * This is also conducive to secure coding practice as the length is
 * always carried with the pointer and the convention for handling a
 * pointer and a length is clear.
 *
 * While it might be possible to write buffer and pointer code more
 * efficiently in some use cases, the thought is that unless there is
 * an extreme need for performance (e.g., you are building a
 * gigabit-per-second IP router), it is probably better to have
 * cleaner code you can be most certain about the security of.
 *
 * The non-const @ref UsefulBuf is usually used to refer an empty
 * buffer to be filled in.  The length is the size of the buffer.
 *
 * The const @ref UsefulBufC is usually used to refer to some data
 * that has been filled in. The length is amount of valid data pointed
 * to.
 *
 * A common use mode is to pass a @ref UsefulBuf to a function, the
 * function puts some data in it, then the function returns a @ref
 * UsefulBufC refering to the data. The @ref UsefulBuf is a non-const
 * "in" parameter and the @ref UsefulBufC is a const "out" parameter
 * so the constness stays correct. There is no single "in,out"
 * parameter (if there was, it would have to be non-const).  Note that
 * the pointer returned in the @ref UsefulBufC usually ends up being
 * the same pointer passed in as a @ref UsefulBuf, though this is not
 * striclty required.
 *
 * A @ref UsefulBuf is null, it has no value, when @c ptr in it is
 * @c NULL.
 *
 * There are functions and macros for the following:
 *  - Initializing
 *  - Create initialized const @ref UsefulBufC from compiler literals
 *  - Create initialized const @ref UsefulBufC from NULL-terminated string
 *  - Make an empty @ref UsefulBuf on the stack
 *  - Checking whether a @ref UsefulBuf is null, empty or both
 *  - Copying, copying with offset, copying head or tail
 *  - Comparing and finding substrings
 *
 * See also @ref UsefulOutBuf. It is a richer structure that has both
 * the size of the valid data and the size of the buffer.
 *
 * @ref UsefulBuf is only 16 or 8 bytes on a 64- or 32-bit machine so
 * it can go on the stack and be a function parameter or return value.
 *
 * Another way to look at it is this. C has the NULL-terminated string
 * as a means for handling text strings, but no means or convention
 * for binary strings. Other languages do have such means, Rust, an
 * efficient compiled language, for example.
 *
 * @ref UsefulBuf is kind of like the Useful Pot Pooh gave Eeyore on
 * his birthday.  Eeyore's balloon fits beautifully, "it goes in and
 * out like anything".
 */
typedef struct q_useful_buf_c {
    const void *ptr;
    size_t      len;
} UsefulBufC;


/**
 * This non-const @ref UsefulBuf is typically used for some allocated
 * memory that is to be filled in. The @c len is the amount of memory,
 * not the length of the valid data in the buffer.
 */
typedef struct q_useful_buf {
   void  *ptr;
   size_t len;
} UsefulBuf;


/**
 * A null @ref UsefulBufC is one that has no value in the same way a
 * @c NULL pointer has no value.  A @ref UsefulBufC is @c NULL when
 * the @c ptr field is @c NULL. It doesn't matter what @c len is.  See
 * UsefulBuf_IsEmpty() for the distinction between null and empty.
 */
/*
 * NULLUsefulBufC and few other macros have to be
 * definied differently in C than C++ because there
 * is no common construct for a literal structure.
 *
 * In C compound literals are used.
 *
 * In C++ list initalization is used. This only works
 * in C++11 and later.
 *
 * Note that some popular C++ compilers can handle compound
 * literals with on-by-default extensions, however
 * this code aims for full correctness with strict
 * compilers so they are not used.
 */
#ifdef __cplusplus
#define NULLUsefulBufC {NULL, 0}
#else
#define NULLUsefulBufC ((UsefulBufC) {NULL, 0})
#endif

/**
 * A null @ref UsefulBuf is one that has no memory associated the same
 * way @c NULL points to nothing. It does not matter what @c len is.
 **/
#ifdef __cplusplus
#define NULLUsefulBuf  {NULL, 0}
#else
#define NULLUsefulBuf  ((UsefulBuf) {NULL, 0})
#endif


/**
 * @brief Check if a @ref UsefulBuf is @ref NULLUsefulBuf or not.
 *
 * @param[in] UB The UsefulBuf to check.
 *
 * @return 1 if it is @ref NULLUsefulBuf, 0 if not.
 */
static inline int UsefulBuf_IsNULL(UsefulBuf UB);


/**
 * @brief Check if a @ref UsefulBufC is @ref NULLUsefulBufC or not.
 *
 * @param[in] UB The @ref UsefulBufC to check.
 *
 * @return 1 if it is @c NULLUsefulBufC, 0 if not.
 */
static inline int UsefulBuf_IsNULLC(UsefulBufC UB);


/**
 * @brief Check if a @ref UsefulBuf is empty or not.
 *
 * @param[in] UB The @ref UsefulBuf to check.
 *
 * @return 1 if it is empty, 0 if not.
 *
 * An "empty" @ref UsefulBuf is one that has a value and can be
 * considered to be set, but that value is of zero length.  It is
 * empty when @c len is zero. It doesn't matter what the @c ptr is.
 *
 * Many uses will not need to clearly distinguish a @c NULL @ref
 * UsefulBuf from an empty one and can have the @c ptr @c NULL and the
 * @c len 0.  However if a use of @ref UsefulBuf needs to make a
 * distinction then @c ptr should not be @c NULL when the @ref
 * UsefulBuf is considered empty, but not @c NULL.
 */
static inline int UsefulBuf_IsEmpty(UsefulBuf UB);


/**
 * @brief Check if a @ref UsefulBufC is empty or not.
 *
 * @param[in] UB The @ref UsefulBufC to check.
 *
 * @return 1 if it is empty, 0 if not.
 */
static inline int UsefulBuf_IsEmptyC(UsefulBufC UB);


/**
 * @brief Check if a @ref UsefulBuf is @ref NULLUsefulBuf or empty.
 *
 * @param[in] UB The @ref UsefulBuf to check.
 *
 * @return 1 if it is either @ref NULLUsefulBuf or empty, 0 if not.
 */
static inline int UsefulBuf_IsNULLOrEmpty(UsefulBuf UB);


/**
 * @brief Check if a @ref UsefulBufC is @ref NULLUsefulBufC or empty.
 *
 * @param[in] UB The @ref UsefulBufC to check.
 *
 * @return 1 if it is either @ref NULLUsefulBufC or empty, 0 if not.
 */
static inline int UsefulBuf_IsNULLOrEmptyC(UsefulBufC UB);


/**
 * @brief Convert a non-const @ref UsefulBuf to a const @ref UsefulBufC.
 *
 * @param[in] UB The @ref UsefulBuf to convert.
 *
 * @return A @ref UsefulBufC struct.
 */
static inline UsefulBufC UsefulBuf_Const(const UsefulBuf UB);


/**
 * @brief Convert a const @ref UsefulBufC to a non-const @ref UsefulBuf.
 *
 * @param[in] UBC The @ref UsefulBuf to convert.
 *
 * @return A non-const @ref UsefulBuf struct.
 *
 * Use of this is not necessary for the intended use mode of @ref
 * UsefulBufC and @ref UsefulBuf.  In that mode, the @ref UsefulBuf is
 * created to describe a buffer that has not had any data put in
 * it. Then the data is put in it.  Then a @ref UsefulBufC is create
 * to describe the part with the data in it. This goes from non-const
 * to const, so this function is not needed.
 *
 * If the -Wcast-qual warning is enabled, this function can be used to
 * avoid that warning.
 */
static inline UsefulBuf UsefulBuf_Unconst(const UsefulBufC UBC);


/**
 * Convert a literal string to a @ref UsefulBufC.
 *
 * @c szString must be a literal string that @c sizeof() works on.
 * This is better for literal strings than UsefulBuf_FromSZ() because
 * it generates less code. It will not work on non-literal strings.
 *
 * The terminating \0 (NULL) is NOT included in the length!
 */
#ifdef __cplusplus
#define UsefulBuf_FROM_SZ_LITERAL(szString)  {(szString), sizeof(szString)-1}
#else
#define UsefulBuf_FROM_SZ_LITERAL(szString) \
    ((UsefulBufC) {(szString), sizeof(szString)-1})
#endif


/**
 * Convert a literal byte array to a @ref UsefulBufC.
 *
 * @c pBytes must be a literal string that @c sizeof() works on.  It
 * will not work on non-literal arrays.
 */
#ifdef __cplusplus
#define UsefulBuf_FROM_BYTE_ARRAY_LITERAL(pBytes)  {(pBytes), sizeof(pBytes)}
#else
#define UsefulBuf_FROM_BYTE_ARRAY_LITERAL(pBytes) \
   ((UsefulBufC) {(pBytes), sizeof(pBytes)})
#endif

/**
 * Make an automatic variable named @c name of type @ref UsefulBuf and
 * point it to a stack variable of the given @c size.
 */
#define  UsefulBuf_MAKE_STACK_UB(name, size) \
    uint8_t    __pBuf##name[(size)];\
    UsefulBuf  name = {__pBuf##name , sizeof( __pBuf##name )}


/**
 * Make a byte array in to a @ref UsefulBuf. This is usually used on
 * stack variables or static variables.  Also see @ref
 * UsefulBuf_MAKE_STACK_UB.
 */
#ifdef __cplusplus
#define UsefulBuf_FROM_BYTE_ARRAY(pBytes)  {(pBytes), sizeof(pBytes)}
#else
#define UsefulBuf_FROM_BYTE_ARRAY(pBytes) \
   ((UsefulBuf) {(pBytes), sizeof(pBytes)})
#endif


/**
 * @brief Convert a NULL-terminated string to a @ref UsefulBufC.
 *
 * @param[in] szString The string to convert.
 *
 * @return A @ref UsefulBufC struct.
 *
 * @c UsefulBufC.ptr points to the string so its lifetime must be
 * maintained.
 *
 * The terminating \0 (NULL) is NOT included in the length.
 */
static inline UsefulBufC UsefulBuf_FromSZ(const char *szString);


/**
 * @brief Copy one @ref UsefulBuf into another at an offset.
 *
 * @param[in] Dest     Destination buffer to copy into.
 * @param[in] uOffset  The byte offset in @c Dest at which to copy to.
 * @param[in] Src      The bytes to copy.
 *
 * @return Pointer and length of the copy or @ref NULLUsefulBufC.
 *
 * This fails and returns @ref NULLUsefulBufC if @c offset is beyond the
 * size of @c Dest.
 *
 * This fails and returns @ref NULLUsefulBufC if the @c Src length
 * plus @c uOffset is greater than the length of @c Dest.
 *
 * The results are undefined if @c Dest and @c Src overlap.
 *
 * This assumes that there is valid data in @c Dest up to @c
 * uOffset. The @ref UsefulBufC returned starts at the beginning of @c
 * Dest and goes to @c Src.len @c + @c uOffset.
 */
UsefulBufC UsefulBuf_CopyOffset(UsefulBuf Dest, size_t uOffset, const UsefulBufC Src);


/**
 * @brief Copy one @ref UsefulBuf into another.
 *
 * @param[in] Dest  The destination buffer to copy into.
 * @param[out] Src  The source to copy from.
 *
 * @return Filled in @ref UsefulBufC on success, @ref NULLUsefulBufC
 *         on failure.
 *
 * This fails if @c Src.len is greater than @c Dest.len.
 *
 * Note that like @c memcpy(), the pointers are not checked and this
 * will crash rather than return @ref NULLUsefulBufC if they are @c
 * NULL or invalid.
 *
 * The results are undefined if @c Dest and @c Src overlap.
 */
static inline UsefulBufC UsefulBuf_Copy(UsefulBuf Dest, const UsefulBufC Src);


/**
 * @brief Set all bytes in a @ref UsefulBuf to a value, for example to 0.
 *
 * @param[in] pDest  The destination buffer to copy into.
 * @param[in] value  The value to set the bytes to.
 *
 * Note that like @c memset(), the pointer in @c pDest is not checked
 * and this will crash if @c NULL or invalid.
 */
static inline UsefulBufC UsefulBuf_Set(UsefulBuf pDest, uint8_t value);


/**
 * @brief Copy a pointer into a @ref UsefulBuf.
 *
 * @param[in,out] Dest  The destination buffer to copy into.
 * @param[in] ptr       The source to copy from.
 * @param[in] uLen      Length of the source; amount to copy.
 *
 * @return Filled in @ref UsefulBufC on success, @ref NULLUsefulBufC
 *         on failure.
 *
 * This fails and returns @ref NULLUsefulBufC if @c uLen is greater
 * than @c pDest->len.
 *
 * Note that like @c memcpy(), the pointers are not checked and this
 * will crash, rather than return 1 if they are @c NULL or invalid.
 */
static inline UsefulBufC UsefulBuf_CopyPtr(UsefulBuf Dest,
                                           const void *ptr,
                                           size_t uLen);


/**
 *  @brief Returns a truncation of a @ref UsefulBufC.
 *
 *  @param[in] UB       The buffer to get the head of.
 *  @param[in] uAmount  The number of bytes in the head.
 *
 *  @return A @ref UsefulBufC that is the head of UB.
 */
static inline UsefulBufC UsefulBuf_Head(UsefulBufC UB, size_t uAmount);


/**
 * @brief  Returns bytes from the end of a @ref UsefulBufC.
 *
 * @param[in] UB       The buffer to get the tail of.
 * @param[in] uAmount  The offset from the start where the tail is to begin.
 *
 * @return A @ref UsefulBufC that is the tail of @c UB or @ref NULLUsefulBufC
 *         if @c uAmount is greater than the length of the @ref UsefulBufC.
 *
 * If @c UB.ptr is @c NULL, but @c UB.len is not zero, then the result will
 * be a @ref UsefulBufC with a @c NULL @c ptr and @c len with the length
 * of the tail.
 */
static inline UsefulBufC UsefulBuf_Tail(UsefulBufC UB, size_t uAmount);


/**
 * @brief Compare one @ref UsefulBufC to another.
 *
 * @param[in] UB1  The first buffer to compare.
 * @param[in] UB2  The second buffer to compare.
 *
 * @return 0, positive or negative value.
 *
 * Returns a negative value if @c UB1 if is less than @c UB2. @c UB1 is
 * less than @c UB2 if it is shorter or the first byte that is not the
 * same is less.
 *
 * Returns 0 if the inputs are the same.
 *
 * Returns a positive value if @c UB2 is less than @c UB1.
 *
 * All that is of significance is that the result is positive, negative
 * or 0. (This doesn't return the difference between the first
 * non-matching byte like @c memcmp() ).
 */
int UsefulBuf_Compare(const UsefulBufC UB1, const UsefulBufC UB2);


/**
 * @brief Find first byte that is not a particular byte value.
 *
 * @param[in] UB     The destination buffer for byte comparison.
 * @param[in] uValue The byte value to compare to.
 *
 * @return  Offset of first byte that isn't @c uValue or
 *          @c SIZE_MAX if all bytes are @c uValue.
 *
 * Note that unlike most comparison functions, 0
 * does not indicate a successful comparison, so the
 * test for match is:
 *
 *      UsefulBuf_IsValue(...) == SIZE_MAX
 *
 * If @c UB is null or empty, there is no match
 * and 0 is returned.
 */
size_t UsefulBuf_IsValue(const UsefulBufC UB, uint8_t uValue);


/**
 * @brief Find one @ref UsefulBufC in another.
 *
 * @param[in] BytesToSearch  Buffer to search through.
 * @param[in] BytesToFind    Buffer with bytes to be found.
 *
 * @return Position of found bytes or @c SIZE_MAX if not found.
 */
size_t UsefulBuf_FindBytes(UsefulBufC BytesToSearch, UsefulBufC BytesToFind);


/**
 @brief Convert a pointer to an offset with bounds checking.

 @param[in] UB  Pointer to the UsefulInputBuf.
 @param[in] p   Pointer to convert to offset.

 @return SIZE_MAX if @c p is out of range, the byte offset if not.
*/
static inline size_t UsefulBuf_PointerToOffset(UsefulBufC UB, const void *p);


#ifndef USEFULBUF_DISABLE_DEPRECATED
/** Deprecated macro; use @ref UsefulBuf_FROM_SZ_LITERAL instead */
#define SZLiteralToUsefulBufC(szString)  UsefulBuf_FROM_SZ_LITERAL(szString)

/** Deprecated macro; use UsefulBuf_MAKE_STACK_UB instead */
#define  MakeUsefulBufOnStack(name, size) \
    uint8_t    __pBuf##name[(size)];\
    UsefulBuf  name = {__pBuf##name , sizeof( __pBuf##name )}

/** Deprecated macro; use @ref UsefulBuf_FROM_BYTE_ARRAY_LITERAL instead */
#define ByteArrayLiteralToUsefulBufC(pBytes) \
   UsefulBuf_FROM_BYTE_ARRAY_LITERAL(pBytes)

/** Deprecated function; use UsefulBuf_Unconst() instead */
static inline UsefulBuf UsefulBufC_Unconst(const UsefulBufC UBC)
{
   UsefulBuf UB;

   // See UsefulBuf_Unconst() implementation for comment on pragmas
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wcast-qual"
   UB.ptr = (void *)UBC.ptr;
#pragma GCC diagnostic pop

   UB.len = UBC.len;

   return UB;
}
#endif /* USEFULBUF_DISABLE_DEPRECATED */




#ifndef USEFULBUF_DISABLE_ALL_FLOAT
/**
 * @brief Copy a @c float to a @c uint32_t.
 *
 * @param[in] f  Float value to copy.
 *
 * @return  A @c uint32_t with the float bits.
 *
 * Convenience function to avoid type punning, compiler warnings and
 * such. The optimizer usually reduces this to a simple assignment.  This
 * is a crusty corner of C.
 */
static inline uint32_t UsefulBufUtil_CopyFloatToUint32(float f);


/**
 * @brief Copy a @c double to a @c uint64_t.
 *
 * @param[in] d  Double value to copy.
 *
 * @return  A @c uint64_t with the double bits.
 *
 * Convenience function to avoid type punning, compiler warnings and
 * such. The optimizer usually reduces this to a simple assignment.  This
 * is a crusty corner of C.
 */
static inline uint64_t UsefulBufUtil_CopyDoubleToUint64(double d);


/**
 * @brief Copy a @c uint32_t to a @c float.
 *
 * @param[in] u32  Integer value to copy.
 *
 * @return  The value as a @c float.
 *
 * Convenience function to avoid type punning, compiler warnings and
 * such. The optimizer usually reduces this to a simple assignment.  This
 * is a crusty corner of C.
 */
static inline float UsefulBufUtil_CopyUint32ToFloat(uint32_t u32);


/**
 * @brief Copy a @c uint64_t to a @c double.
 *
 * @param[in] u64  Integer value to copy.
 *
 * @return  The value as a @c double.
 *
 * Convenience function to avoid type punning, compiler warnings and
 * such. The optimizer usually reduces this to a simple assignment.  This
 * is a crusty corner of C.
 */
static inline double UsefulBufUtil_CopyUint64ToDouble(uint64_t u64);
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */




/**
 * UsefulOutBuf is a structure and functions (an object) for
 * serializing data into a buffer to encode for a network protocol or
 * write data to a file.
 *
 * The main idea is that all the pointer manipulation is performed by
 * @ref UsefulOutBuf functions so the caller doesn't have to do any
 * pointer manipulation.  The pointer manipulation is centralized.
 * This code has been reviewed and written carefully so it
 * spares the caller of much of this work and results in safer code
 * with less effort.
 *
 * The @ref UsefulOutBuf methods that add data to the output buffer
 * always check the length and will never write off the end of the
 * output buffer. If an attempt to add data that will not fit is made,
 * an internal error flag will be set and further attempts to add data
 * will not do anything.
 *
 * There is no way to ever write off the end of that buffer when
 * calling the @c UsefulOutBuf_AddXxx() and
 * @c UsefulOutBuf_InsertXxx() functions.
 *
 * The functions to add data do not report success of failure. The
 * caller only needs to check for an error in the final call, either
 * UsefulOutBuf_OutUBuf() or UsefulOutBuf_CopyOut() to get the
 * result. This makes the calling code cleaner.
 *
 * There is a utility function to get the error status anytime along
 * the way for a special circumstance. There are functions to see how
 * much room is left and see if some data will fit too, but their use
 * is generally unnecessary.
 *
 * The general call flow is:
 *
 *    - Initialize by calling @ref UsefulOutBuf_Init(). The output
 *      buffer given to it can be from the heap, stack or
 *      otherwise. @ref UsefulOutBuf_MakeOnStack is a convenience
 *      macro that makes a buffer on the stack and initializes it.
 *
 *    - Call methods like UsefulOutBuf_InsertString(),
 *      UsefulOutBuf_AppendUint32() and UsefulOutBuf_InsertUsefulBuf()
 *      to output data. The append calls add data to the end of the
 *      valid data. The insert calls take a position argument.
 *
 *    - Call UsefulOutBuf_OutUBuf() or UsefulOutBuf_CopyOut() to see
 *      there were no errors and to get the serialized output bytes.
 *
 * @ref UsefulOutBuf can be used in a mode to calculate the size of
 * what would be output without actually outputting anything.  This is
 * useful to calculate the size of a buffer that is to be allocated to
 * hold the output. See @ref SizeCalculateUsefulBuf.
 *
 * Methods like UsefulOutBuf_InsertUint64() always output in network
 * byte order (big endian).
 *
 * The possible errors are:
 *
 *  - The @ref UsefulOutBuf was not initialized or was corrupted.
 *
 *  - An attempt was made to add data that will not fit.
 *
 *  - An attempt was made to insert data at a position beyond the end of
 *    the buffer.
 *
 *  - An attempt was made to insert data at a position beyond the valid
 *    data in the buffer.
 *
 * Some inexpensive simple sanity checks are performed before every
 * data addition to guard against use of an uninitialized or corrupted
 * UsefulOutBuf.
 *
 * @ref UsefulOutBuf has been used to create a CBOR encoder. The CBOR
 * encoder has almost no pointer manipulation in it, is easier to
 * read, and easier to review.
 *
 * A @ref UsefulOutBuf is small and can go on the stack:
 *   - 32 bytes (27 bytes plus alignment padding) on a 64-bit CPU
 *   - 16 bytes (15 bytes plus alignment padding) on a 32-bit CPU
 */
typedef struct useful_out_buf {
   /* PRIVATE DATA STRUCTURE */
   UsefulBuf  UB;       /* Memory that is being output to */
   size_t     data_len; /* length of the valid data, the insertion point */
   uint16_t   magic;    /* Used to detect corruption and lack
                         * of initialization */
   uint8_t    err;
} UsefulOutBuf;


/**
 * This is a @ref UsefulBuf value that can be passed to
 * UsefulOutBuf_Init() to have it calculate the size of the output
 * buffer needed. Pass this for @c Storage, call all the append and
 * insert functions normally, then call UsefulOutBuf_OutUBuf(). The
 * returned @ref UsefulBufC has the size.
 *
 * As one can see, this is just a NULL pointer and very large size.
 * The NULL pointer tells UsefulOutputBuf to not copy any data.
 */
#ifdef __cplusplus
#define SizeCalculateUsefulBuf {NULL, SIZE_MAX}
#else
#define SizeCalculateUsefulBuf ((UsefulBuf) {NULL, SIZE_MAX})
#endif


/**
 * @brief Initialize and supply the actual output buffer.
 *
 * @param[out] pUOutBuf  The @ref UsefulOutBuf to initialize.
 * @param[in] Storage    Buffer to output into.
 *
 * This initializes the @ref UsefulOutBuf with storage, sets the
 * current position to the beginning of the buffer and clears the
 * error state.
 *
 * See @ref SizeCalculateUsefulBuf for instructions on how to
 * initialize a @ref UsefulOutBuf to calculate the size that would be
 * output without actually outputting.
 *
 * This must be called before the @ref UsefulOutBuf is used.
 */
void UsefulOutBuf_Init(UsefulOutBuf *pUOutBuf, UsefulBuf Storage);


/**
 * Convenience macro to make a @ref UsefulOutBuf on the stack and
 * initialize it with a stack buffer of the given size. The variable
 * will be named @c name.
 */
#define  UsefulOutBuf_MakeOnStack(name, size) \
   uint8_t       __pBuf##name[(size)];\
   UsefulOutBuf  name;\
   UsefulOutBuf_Init(&(name), (UsefulBuf){__pBuf##name, (size)});


/**
 * @brief Reset a @ref UsefulOutBuf for re use.
 *
 * @param[in] pUOutBuf Pointer to the @ref UsefulOutBuf
 *
 * This sets the amount of data in the output buffer to none and
 * clears the error state.
 *
 * The output buffer is still the same one and size as from the
 * UsefulOutBuf_Init() call.
 *
 * This doesn't zero the data, just resets to 0 bytes of valid data.
 */
static inline void UsefulOutBuf_Reset(UsefulOutBuf *pUOutBuf);


/**
 * @brief Returns position of end of data in the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 *
 * @return position of end of data.
 *
 * On a freshly initialized @ref UsefulOutBuf with no data added, this
 * will return 0. After 10 bytes have been added, it will return 10
 * and so on.
 *
 * Generally, there is no need to call this for most uses of @ref
 * UsefulOutBuf.
 */
static inline size_t UsefulOutBuf_GetEndPosition(UsefulOutBuf *pUOutBuf);


/**
 * @brief Returns whether any data has been added to the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 *
 * @return 1 if output position is at start, 0 if not.
 */
static inline int UsefulOutBuf_AtStart(UsefulOutBuf *pUOutBuf);


/**
 * @brief Inserts bytes into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] NewData   The bytes to insert.
 * @param[in] uPos      Index in output buffer at which to insert.
 *
 * @c NewData is the pointer and length for the bytes to be added to
 * the output buffer. There must be room in the output buffer for all
 * of @c NewData or an error will occur.
 *
 * The insertion point must be between 0 and the current valid
 * data. If not, an error will occur. Appending data to the output
 * buffer is achieved by inserting at the end of the valid data. This
 * can be retrieved by calling UsefulOutBuf_GetEndPosition().
 *
 * When insertion is performed, the bytes between the insertion point
 * and the end of data previously added to the output buffer are slid
 * to the right to make room for the new data.
 *
 * Overlapping buffers are OK. @c NewData can point to data in the
 * output buffer.
 *
 * If an error occurs, an error state is set in the @ref
 * UsefulOutBuf. No error is returned.  All subsequent attempts to add
 * data will do nothing.
 *
 * The intended use is that all additions are made without checking
 * for an error. The error will be taken into account when
 * UsefulOutBuf_OutUBuf() returns @c NullUsefulBufC.
 * UsefulOutBuf_GetError() can also be called to check for an error.
 */
void UsefulOutBuf_InsertUsefulBuf(UsefulOutBuf *pUOutBuf,
                                  UsefulBufC NewData,
                                  size_t uPos);


/**
 * @brief Insert a data buffer into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] pBytes    Pointer to the bytes to insert
 * @param[in] uLen      Length of the bytes to insert
 * @param[in] uPos      Index in output buffer at which to insert
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This is the same with
 * the difference being a pointer and length is passed in rather than an
 * @ref UsefulBufC.
 */
static inline void UsefulOutBuf_InsertData(UsefulOutBuf *pUOutBuf,
                                           const void *pBytes,
                                           size_t uLen,
                                           size_t uPos);


/**
 * @brief Insert a NULL-terminated string into the UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] szString  NULL-terminated string to insert.
 * @param[in] uPos      Index in output buffer at which to insert.
 */
static inline void UsefulOutBuf_InsertString(UsefulOutBuf *pUOutBuf,
                                             const char *szString,
                                             size_t uPos);


/**
 * @brief Insert a byte into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the UsefulOutBuf.
 * @param[in] byte      Bytes to insert.
 * @param[in] uPos      Index in output buffer at which to insert.
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This is the same
 * with the difference being a single byte is to be inserted.
 */
static inline void UsefulOutBuf_InsertByte(UsefulOutBuf *pUOutBuf,
                                           uint8_t byte,
                                           size_t uPos);


/**
 * @brief Insert a 16-bit integer into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf    Pointer to the @ref UsefulOutBuf.
 * @param[in] uInteger16  Integer to insert.
 * @param[in] uPos        Index in output buffer at which to insert.
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This is the same
 * with the difference being a two-byte integer is to be inserted.
 *
 * The integer will be inserted in network byte order (big endian).
 */
static inline void UsefulOutBuf_InsertUint16(UsefulOutBuf *pUOutBuf,
                                             uint16_t uInteger16,
                                             size_t uPos);


/**
 * @brief Insert a 32-bit integer into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf    Pointer to the @ref UsefulOutBuf.
 * @param[in] uInteger32  Integer to insert.
 * @param[in] uPos        Index in output buffer at which to insert.
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This is the same
 * with the difference being a four-byte integer is to be inserted.
 *
 * The integer will be inserted in network byte order (big endian).
 */
static inline void UsefulOutBuf_InsertUint32(UsefulOutBuf *pUOutBuf,
                                             uint32_t uInteger32,
                                             size_t uPos);


/**
 * @brief Insert a 64-bit integer into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf    Pointer to the @ref UsefulOutBuf.
 * @param[in] uInteger64  Integer to insert.
 * @param[in] uPos        Index in output buffer at which to insert.
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This is the same
 * with the difference being an eight-byte integer is to be inserted.
 *
 * The integer will be inserted in network byte order (big endian).
 */
static inline void UsefulOutBuf_InsertUint64(UsefulOutBuf *pUOutBuf,
                                             uint64_t uInteger64,
                                             size_t uPos);


#ifndef USEFULBUF_DISABLE_ALL_FLOAT
/**
 * @brief Insert a @c float into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] f         @c float to insert.
 * @param[in] uPos      Index in output buffer at which to insert.
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This is the same
 * with the difference being a @c float is to be inserted.
 *
 * The @c float will be inserted in network byte order (big endian).
 */
static inline void UsefulOutBuf_InsertFloat(UsefulOutBuf *pUOutBuf,
                                            float f,
                                            size_t uPos);


/**
 * @brief Insert a @c double into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] d         @c double  to insert.
 * @param[in] uPos      Index in output buffer at which to insert.
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This is the same
 * with the difference being a @c double is to be inserted.
 *
 * The @c double will be inserted in network byte order (big endian).
 */
static inline void UsefulOutBuf_InsertDouble(UsefulOutBuf *pUOutBuf,
                                             double d,
                                             size_t uPos);
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */


/**
 * @brief Append a @ref UsefulBuf into the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] NewData   The @ref UsefulBuf with the bytes to append.
 *
 * See UsefulOutBuf_InsertUsefulBuf() for details. This does the same
 * with the insertion point at the end of the valid data.
 */
static inline void UsefulOutBuf_AppendUsefulBuf(UsefulOutBuf *pUOutBuf,
                                                UsefulBufC NewData);


/**
 * @brief Append bytes to the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] pBytes    Pointer to bytes to append.
 * @param[in] uLen      Length of @c pBytes to append.
 *
 * See UsefulOutBuf_InsertData() for details. This does the same with
 * the insertion point at the end of the valid data.
 */
static inline void UsefulOutBuf_AppendData(UsefulOutBuf *pUOutBuf,
                                           const void *pBytes,
                                           size_t uLen);


/**
 * @brief Append a NULL-terminated string to the @ref UsefulOutBuf
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] szString  NULL-terminated string to append.
 */
static inline void UsefulOutBuf_AppendString(UsefulOutBuf *pUOutBuf,
                                             const char *szString);


/**
 * @brief Append a byte to the @ref UsefulOutBuf
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] byte      Bytes to append.
 *
 * See UsefulOutBuf_InsertByte() for details. This does the same
 * with the insertion point at the end of the valid data.
 */
static inline void UsefulOutBuf_AppendByte(UsefulOutBuf *pUOutBuf,
                                           uint8_t byte);


/**
 * @brief Append an integer to the @ref UsefulOutBuf
 *
 * @param[in] pUOutBuf    Pointer to the @ref UsefulOutBuf.
 * @param[in] uInteger16  Integer to append.
 *
 * See UsefulOutBuf_InsertUint16() for details. This does the same
 * with the insertion point at the end of the valid data.
 *
 * The integer will be appended in network byte order (big endian).
 */
static inline void UsefulOutBuf_AppendUint16(UsefulOutBuf *pUOutBuf,
                                             uint16_t uInteger16);


/**
 * @brief Append an integer to the @ref UsefulOutBuf
 *
 * @param[in] pUOutBuf    Pointer to the @ref UsefulOutBuf.
 * @param[in] uInteger32  Integer to append.
 *
 * See UsefulOutBuf_InsertUint32() for details. This does the same
 * with the insertion point at the end of the valid data.
 *
 * The integer will be appended in network byte order (big endian).
 */
static inline void UsefulOutBuf_AppendUint32(UsefulOutBuf *pUOutBuf,
                                             uint32_t uInteger32);


/**
 * @brief Append an integer to the @ref UsefulOutBuf
 *
 * @param[in] pUOutBuf    Pointer to the @ref UsefulOutBuf.
 * @param[in] uInteger64  Integer to append.
 *
 * See UsefulOutBuf_InsertUint64() for details. This does the same
 * with the insertion point at the end of the valid data.
 *
 * The integer will be appended in network byte order (big endian).
 */
static inline void UsefulOutBuf_AppendUint64(UsefulOutBuf *pUOutBuf,
                                             uint64_t uInteger64);


#ifndef USEFULBUF_DISABLE_ALL_FLOAT
/**
 * @brief Append a @c float to the @ref UsefulOutBuf
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] f         @c float to append.
 *
 * See UsefulOutBuf_InsertFloat() for details. This does the same with
 * the insertion point at the end of the valid data.
 *
 * The float will be appended in network byte order (big endian).
 */
static inline void UsefulOutBuf_AppendFloat(UsefulOutBuf *pUOutBuf,
                                            float f);


/**
 * @brief Append a @c double to the @ref UsefulOutBuf
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] d         @c double to append.
 *
 * See UsefulOutBuf_InsertDouble() for details. This does the same
 * with the insertion point at the end of the valid data.
 *
 * The double will be appended in network byte order (big endian).
 */
static inline void UsefulOutBuf_AppendDouble(UsefulOutBuf *pUOutBuf,
                                             double d);
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */


/**
 * @brief Returns the current error status.
 *
 * @param[in] pUOutBuf Pointer to the @ref UsefulOutBuf.
 *
 * @return 0 if all OK, 1 on error.
 *
 * This returns the error status since a call to either
 * UsefulOutBuf_Reset() of UsefulOutBuf_Init().  Once a @ref UsefulOutBuf
 * goes into the error state, it will stay until one of those
 * functions is called.
 *
 * Possible error conditions are:
 *   - bytes to be inserted will not fit
 *   - insertion point is out of buffer or past valid data
 *   - current position is off end of buffer (probably corrupted or uninitialized)
 *   - detect corruption / uninitialized by bad magic number
 */
static inline int UsefulOutBuf_GetError(UsefulOutBuf *pUOutBuf);


/**
 * @brief Returns number of bytes unused used in the output buffer.
 *
 * @param[in] pUOutBuf Pointer to the @ref UsefulOutBuf.
 *
 * @return Number of unused bytes or zero.
 *
 * Because of the error handling strategy and checks in
 * UsefulOutBuf_InsertUsefulBuf() it is usually not necessary to use
 * this.
 */
static inline size_t UsefulOutBuf_RoomLeft(UsefulOutBuf *pUOutBuf);


/**
 *@brief Returns 1 if some number of bytes will fit in the @ref UsefulOutBuf.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf
 * @param[in] uLen      Number of bytes for which to check
 *
 * @return 1 if @c uLen bytes will fit, 0 if not.
 *
 * Because of the error handling strategy and checks in
 * UsefulOutBuf_InsertUsefulBuf() it is usually not necessary to use
 * this.
 */
static inline int UsefulOutBuf_WillItFit(UsefulOutBuf *pUOutBuf, size_t uLen);


 /**
  * @brief Returns 1 if buffer given to UsefulOutBuf_Init() was @c NULL.
  *
  * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf
  *
  * @return 1 if buffer given to UsefulOutBuf_Init() was @c NULL.
  *
  * Giving a @c NULL output buffer to UsefulOutBuf_Init() is used when
  * just calculating the length of the encoded data.
  */
static inline int UsefulOutBuf_IsBufferNULL(UsefulOutBuf *pUOutBuf);


/**
 * @brief Returns pointer and length of the output buffer not yet used.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 *
 * @return pointer and length of output buffer not used.
 *
 * This is an escape that allows the caller to write directly
 * to the output buffer without any checks. This doesn't
 * change the output buffer or state. It just returns a pointer
 * and length of the bytes remaining.
 *
 * This is useful to avoid having the bytes to be added all
 * in a contiguous buffer. Its use can save memory. A good
 * example is in the COSE encrypt implementation where
 * the output of the symmetric cipher can go directly
 * into the output buffer, rather than having to go into
 * an intermediate buffer.
 *
 * See UsefulOutBuf_Advance() which is used to tell
 * UsefulOutBuf how much was written.
 *
 * Warning: this bypasses the buffer safety provided by
 * UsefulOutBuf!
 */
static inline UsefulBuf
UsefulOutBuf_GetOutPlace(UsefulOutBuf *pUOutBuf);


/**
 * @brief Advance the amount output assuming it was written by the caller.
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[in] uAmount  The amount to advance.
 *
 * This advances the position in the output buffer
 * by \c uAmount. This assumes that the
 * caller has written \c uAmount to the pointer obtained
 * with UsefulOutBuf_GetOutPlace().
 *
 * Warning: this bypasses the buffer safety provided by
 * UsefulOutBuf!
 */
void
UsefulOutBuf_Advance(UsefulOutBuf *pUOutBuf, size_t uAmount);


/**
 *  @brief Returns the resulting valid data in a UsefulOutBuf
 *
 *  @param[in] pUOutBuf Pointer to the @ref UsefulOutBuf.
 *
 *  @return The valid data in @ref UsefulOutBuf or
 *           @ref NULLUsefulBufC if there was an error adding data.
 *
 *  The storage for the returned data is the @c Storage parameter
 *  passed to UsefulOutBuf_Init(). See also UsefulOutBuf_CopyOut().
 *
 *  This can be called anytime and many times to get intermediate
 *  results. It doesn't change the data or reset the current position,
 *  so further data can be added.
 */
UsefulBufC UsefulOutBuf_OutUBuf(UsefulOutBuf *pUOutBuf);


/**
 * @brief Copies the valid data into a supplied buffer
 *
 * @param[in] pUOutBuf  Pointer to the @ref UsefulOutBuf.
 * @param[out] Dest     The destination buffer to copy into.
 *
 * @return Pointer and length of copied data or @c NULLUsefulBufC
 *         if it will not fit in the @c Dest buffer or the error
 *         state was entered.
 *
 * This is the same as UsefulOutBuf_OutUBuf() except it copies the
 * data to @c Dest.
 */
UsefulBufC UsefulOutBuf_CopyOut(UsefulOutBuf *pUOutBuf, UsefulBuf Dest);




/**
 * @ref UsefulInputBuf is the counterpart to @ref UsefulOutBuf. It is
 * for parsing data received.  Initialize it with the data from the
 * network. Then use the functions like UsefulInputBuf_GetBytes() to
 * get data chunks of various types. A position cursor is maintained
 * internally.
 *
 * As long as the functions here are used, there will never be any
 * reference off the end of the given buffer (except
 * UsefulInputBuf_SetBufferLength()). This is true even if they are
 * called incorrectly, an attempt is made to seek off the end of the
 * buffer or such. This makes it easier to write safe and correct
 * code.  For example, the QCBOR decoder implementation is safer and
 * easier to review through its use of @ref UsefulInputBuf.
 *
 * @ref UsefulInputBuf maintains an internal error state.  The
 * intended use is fetching data chunks without any error checks until
 * the end.  If there was any error, such as an attempt to fetch data
 * off the end, the error state is entered and no further data will be
 * returned. In the error state the @c UsefulInputBuf_GetXxxx()
 * functions return 0, or @c NULL or @ref NULLUsefulBufC. As long as
 * null is not dereferenced, the error check can be put off until the
 * end, simplifying the calling code.
 *
 * The integer and float parsing expects network byte order (big
 * endian).  Network byte order is what is used by TCP/IP, CBOR and
 * most internet protocols.
 *
 * Lots of inline functions are used to keep code size down. The
 * optimizer, particularly with the @c -Os or @c -O3, also reduces
 * code size a lot. The only non-inline code is
 * UsefulInputBuf_GetBytes().  It is less than 100 bytes so use of
 * @ref UsefulInputBuf doesn't add much code for all the messy
 * hard-to-get right issues with parsing binary protocols in C that it
 * solves.
 *
 * The parse context size is:
 *   - 64-bit machine: 16 + 8 + 2 + 1 (+ 5 bytes padding to align) = 32 bytes
 *   - 32-bit machine: 8 + 4 + 2 + 1 (+ 1 byte padding to align) = 16 bytes
 */
typedef struct useful_input_buf {
   /* PRIVATE DATA STRUCTURE */
   UsefulBufC UB;     /* Data being parsed */
   size_t     cursor; /* Current offset in data being parse */
   uint16_t   magic;  /* Check for corrupted or uninitialized UsefulInputBuf */
   uint8_t    err;    /* Set request goes off end or magic number is bad */
} UsefulInputBuf;

#define UIB_MAGIC (0xB00F)


/**
 * @brief Initialize the @ref UsefulInputBuf structure before use.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 * @param[in] UB       The data to parse.
 */
static inline void UsefulInputBuf_Init(UsefulInputBuf *pUInBuf, UsefulBufC UB);


/**
 * @brief Returns current position in input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return Integer position of the cursor.
 *
 * The position that the next bytes will be returned from.
 */
static size_t UsefulInputBuf_Tell(UsefulInputBuf *pUInBuf);


/**
 * @brief Sets the current position in input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 * @param[in] uPos     Position to set to.
 *
 * If the position is off the end of the input buffer, the error state
 * is entered.
 *
 * Seeking to a valid position in the buffer will not reset the error
 * state. Only re-initialization will do that.
 */
static void UsefulInputBuf_Seek(UsefulInputBuf *pUInBuf, size_t uPos);


/**
 * @brief Returns the number of bytes from the cursor to the end of the buffer,
 * the unconsumed bytes.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return Number of bytes unconsumed or 0 on error.
 *
 * Returns 0 if the cursor is invalid or corruption of the
 * @ref UsefulInputBuf structure is detected.
 */
static size_t UsefulInputBuf_BytesUnconsumed(UsefulInputBuf *pUInBuf);


/**
 * @brief Check if there are unconsumed bytes.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 * @param[in] uLen     Number of bytes to check availability for.
 *
 * @return 1 if @c uLen bytes are available after the cursor, and 0 if not.
 */
static int UsefulInputBuf_BytesAvailable(UsefulInputBuf *pUInBuf, size_t uLen);


/**
 * @brief Convert a pointer to an offset with bounds checking.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 * @param[in] p        Pointer to convert to offset.
 *
 * @return SIZE_MAX if @c p is out of range, the byte offset if not.
 */
static inline size_t UsefulInputBuf_PointerToOffset(UsefulInputBuf *pUInBuf, const void *p);


/**
 * @brief Get pointer to bytes out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 * @param[in] uNum     Number of bytes to get.
 *
 * @return Pointer to bytes.
 *
 * This consumes @c uNum bytes from the input buffer. This returns a
 * pointer to the start of the @c uNum bytes.
 *
 * If there are not @c uNum bytes in the input buffer, @c NULL will be
 * returned and the error state is entered.
 *
 * This advances the position cursor by @c uNum bytes.
 */
const void * UsefulInputBuf_GetBytes(UsefulInputBuf *pUInBuf, size_t uNum);


/**
 * @brief Get @ref UsefulBuf out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 * @param[in] uNum     Number of bytes to get.
 *
 * @return A @ref UsefulBufC with ptr and length of bytes consumed.
 *
 * This consumes @c uNum bytes from the input buffer and returns the
 * pointer and length for them as a @ref UsefulBufC. The length
 * returned will always be @c uNum. The position cursor is advanced by
 * @c uNum bytes.
 *
 * If there are not @c uNum bytes in the input buffer, @ref
 * NULLUsefulBufC will be returned and the error state is entered.
 */
static inline UsefulBufC UsefulInputBuf_GetUsefulBuf(UsefulInputBuf *pUInBuf, size_t uNum);


/**
 * @brief Get a byte out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return The byte.
 *
 * This consumes 1 byte from the input buffer, returns it and advances
 * the position cursor by 1.
 *
 * If there is not 1 byte in the buffer, 0 will be returned for the
 * byte and the error state is entered. To know if the 0 returned was
 * in error or the real value, the error state must be checked.  If
 * possible, put this off until all values are retrieved to have
 * smaller and simpler code, but if not possible
 * UsefulInputBuf_GetError() can be called. Also, in the error state
 * UsefulInputBuf_GetBytes() returns @c NULL *or the @c ptr from
 * UsefulInputBuf_GetUsefulBuf() is @c NULL.
 */
static inline uint8_t UsefulInputBuf_GetByte(UsefulInputBuf *pUInBuf);


/**
 * @brief Get a @c uint16_t out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return The @c uint16_t.
 *
 * See UsefulInputBuf_GetByte(). This works the same, except it returns
 * a @c uint16_t and two bytes are consumed.
 *
 * The input bytes are interpreted in network order (big endian).
 */
static inline uint16_t UsefulInputBuf_GetUint16(UsefulInputBuf *pUInBuf);


/**
 * @brief Get a @c uint32_t out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return The @c uint32_t.
 *
 * See UsefulInputBuf_GetByte(). This works the same, except it
 * returns a @c uint32_t and four bytes are consumed.
 *
 * The input bytes are interpreted in network order (big endian).
 */
static uint32_t UsefulInputBuf_GetUint32(UsefulInputBuf *pUInBuf);


/**
 * @brief Get a @c uint64_t out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return The uint64_t.
 *
 * See UsefulInputBuf_GetByte(). This works the same, except it returns
 * a @c uint64_t and eight bytes are consumed.
 *
 * The input bytes are interpreted in network order (big endian).
 */
static uint64_t UsefulInputBuf_GetUint64(UsefulInputBuf *pUInBuf);


#ifndef USEFULBUF_DISABLE_ALL_FLOAT
/**
 * @brief Get a float out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return The float.
 *
 * See UsefulInputBuf_GetByte(). This works the same, except it
 * returns a float and four bytes are consumed.
 *
 * The input bytes are interpreted in network order (big endian).
 */
static float UsefulInputBuf_GetFloat(UsefulInputBuf *pUInBuf);


/**
 * @brief Get a double out of the input buffer.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return The double.
 *
 * See UsefulInputBuf_GetByte(). This works the same, except it
 * returns a double and eight bytes are consumed.
 *
 * The input bytes are interpreted in network order (big endian).
 */
static double UsefulInputBuf_GetDouble(UsefulInputBuf *pUInBuf);
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */


/**
 * @brief Get the error status.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return 0 if not in the error state, 1 if in the error state.
 *
 * This returns whether the @ref UsefulInputBuf is in the
 * error state or not.
 *
 * The error state is entered for one of these reasons:
 * - Attempt to fetch data past the end of the buffer
 * - Attempt to seek to a position past the end of the buffer
 * - Attempt to get data from an uninitialized  or corrupt instance
 *   of @ref UsefulInputBuf
 *
 * Once in the error state, it can only be cleared by calling
 * UsefulInputBuf_Init().
 *
 * For many use cases, it is possible to only call this once after all
 * the @c UsefulInputBuf_GetXxxx() calls have been made.  This is
 * possible if no reference to the data returned are needed before the
 * error state is checked.
 *
 * In some cases UsefulInputBuf_GetUsefulBuf() or
 * UsefulInputBuf_GetBytes() can stand in for this because they return
 * @c NULL if the error state has been entered. (The others can't stand
 * in because they don't return a clearly distinct error value.)
 */
static int UsefulInputBuf_GetError(UsefulInputBuf *pUInBuf);


/**
 * @brief Gets the input buffer length.
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 *
 * @return The length of the input buffer.
 *
 * This returns the length of the input buffer set by
 * UsefulInputBuf_Init() or UsefulInputBuf_SetBufferLength().
 */
static inline size_t UsefulInputBuf_GetBufferLength(UsefulInputBuf *pUInBuf);


/**
 * @brief Alters the input buffer length (use with caution).
 *
 * @param[in] pUInBuf  Pointer to the @ref UsefulInputBuf.
 * @param[in] uNewLen  The new length of the input buffer.
 *
 * This alters the internal remembered length of the input buffer set
 * when UsefulInputBuf_Init() was called.
 *
 * The new length given here should always be equal to or less than
 * the length given when UsefulInputBuf_Init() was called. Making it
 * larger allows @ref UsefulInputBuf to run off the input buffer.
 *
 * The typical use is to set a length shorter than that when
 * initialized to constrain parsing. If
 * UsefulInputBuf_GetBufferLength() was called before this, then the
 * original length can be restored with another call to this.
 *
 * This should be used with caution. It is the only
 * @ref UsefulInputBuf method that can violate the safety of input
 * buffer parsing.
 */
static void UsefulInputBuf_SetBufferLength(UsefulInputBuf *pUInBuf, size_t uNewLen);




/*----------------------------------------------------------
 Inline implementations.
 */
static inline int UsefulBuf_IsNULL(UsefulBuf UB)
{
   return !UB.ptr;
}


static inline int UsefulBuf_IsNULLC(UsefulBufC UB)
{
   return !UB.ptr;
}


static inline int UsefulBuf_IsEmpty(UsefulBuf UB)
{
   return !UB.len;
}


static inline int UsefulBuf_IsEmptyC(UsefulBufC UB)
{
   return !UB.len;
}


static inline int UsefulBuf_IsNULLOrEmpty(UsefulBuf UB)
{
   return UsefulBuf_IsEmpty(UB) || UsefulBuf_IsNULL(UB);
}


static inline int UsefulBuf_IsNULLOrEmptyC(UsefulBufC UB)
{
   return UsefulBuf_IsEmptyC(UB) || UsefulBuf_IsNULLC(UB);
}


static inline UsefulBufC UsefulBuf_Const(const UsefulBuf UB)
{
   UsefulBufC UBC;
   UBC.ptr = UB.ptr;
   UBC.len = UB.len;

   return UBC;
}

static inline UsefulBuf UsefulBuf_Unconst(const UsefulBufC UBC)
{
   UsefulBuf UB;

   /* -Wcast-qual is a good warning flag to use in general. This is
    * the one place in UsefulBuf where it needs to be quieted. Since
    * clang supports GCC pragmas, this works for clang too. */
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wcast-qual"
   UB.ptr = (void *)UBC.ptr;
#pragma GCC diagnostic pop

   UB.len = UBC.len;

   return UB;
}


static inline UsefulBufC UsefulBuf_FromSZ(const char *szString)
{
   UsefulBufC UBC;
   UBC.ptr = szString;
   UBC.len = strlen(szString);
   return UBC;
}


static inline UsefulBufC UsefulBuf_Copy(UsefulBuf Dest, const UsefulBufC Src)
{
   return UsefulBuf_CopyOffset(Dest, 0, Src);
}


static inline UsefulBufC UsefulBuf_Set(UsefulBuf Dest, uint8_t value)
{
   memset(Dest.ptr, value, Dest.len);

   UsefulBufC UBC;
   UBC.ptr = Dest.ptr;
   UBC.len = Dest.len;

   return UBC;
}


static inline UsefulBufC UsefulBuf_CopyPtr(UsefulBuf Dest, const void *ptr, size_t len)
{
   UsefulBufC UBC;
   UBC.ptr = ptr;
   UBC.len = len;
   return UsefulBuf_Copy(Dest, UBC);
}


static inline UsefulBufC UsefulBuf_Head(UsefulBufC UB, size_t uAmount)
{
   if(uAmount > UB.len) {
      return NULLUsefulBufC;
   }
   UsefulBufC UBC;

   UBC.ptr = UB.ptr;
   UBC.len = uAmount;

   return UBC;
}


static inline UsefulBufC UsefulBuf_Tail(UsefulBufC UB, size_t uAmount)
{
   UsefulBufC ReturnValue;

   if(uAmount > UB.len) {
      ReturnValue = NULLUsefulBufC;
   } else if(UB.ptr == NULL) {
      ReturnValue.ptr = NULL;
      ReturnValue.len = UB.len - uAmount;
   } else {
      ReturnValue.ptr = (const uint8_t *)UB.ptr + uAmount;
      ReturnValue.len = UB.len - uAmount;
   }

   return ReturnValue;
}


static inline size_t UsefulBuf_PointerToOffset(UsefulBufC UB, const void *p)
{
   if(UB.ptr == NULL) {
      return SIZE_MAX;
   }

   if(p < UB.ptr) {
      /* given pointer is before start of buffer */
      return SIZE_MAX;
   }

   // Cast to size_t (from ptrdiff_t) is OK because of check above
   const size_t uOffset = (size_t)((const uint8_t *)p - (const uint8_t *)UB.ptr);

    if(uOffset >= UB.len) {
      /* given pointer is off the end of the buffer */
      return SIZE_MAX;
   }

   return uOffset;
}


#ifndef USEFULBUF_DISABLE_ALL_FLOAT
static inline uint32_t UsefulBufUtil_CopyFloatToUint32(float f)
{
   uint32_t u32;
   memcpy(&u32, &f, sizeof(uint32_t));
   return u32;
}

static inline uint64_t UsefulBufUtil_CopyDoubleToUint64(double d)
{
   uint64_t u64;
   memcpy(&u64, &d, sizeof(uint64_t));
   return u64;
}

static inline double UsefulBufUtil_CopyUint64ToDouble(uint64_t u64)
{
   double d;
   memcpy(&d, &u64, sizeof(uint64_t));
   return d;
}

static inline float UsefulBufUtil_CopyUint32ToFloat(uint32_t u32)
{
   float f;
   memcpy(&f, &u32, sizeof(uint32_t));
   return f;
}
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */




static inline void UsefulOutBuf_Reset(UsefulOutBuf *pMe)
{
   pMe->data_len = 0;
   pMe->err      = 0;
}


static inline size_t UsefulOutBuf_GetEndPosition(UsefulOutBuf *pMe)
{
   return pMe->data_len;
}


static inline int UsefulOutBuf_AtStart(UsefulOutBuf *pMe)
{
   return 0 == pMe->data_len;
}


static inline void UsefulOutBuf_InsertData(UsefulOutBuf *pMe,
                                           const void *pBytes,
                                           size_t uLen,
                                           size_t uPos)
{
   UsefulBufC Data = {pBytes, uLen};
   UsefulOutBuf_InsertUsefulBuf(pMe, Data, uPos);
}


static inline void UsefulOutBuf_InsertString(UsefulOutBuf *pMe,
                                             const char *szString,
                                             size_t uPos)
{
   UsefulBufC UBC;
   UBC.ptr = szString;
   UBC.len = strlen(szString);

   UsefulOutBuf_InsertUsefulBuf(pMe, UBC, uPos);
}


static inline void UsefulOutBuf_InsertByte(UsefulOutBuf *me,
                                           uint8_t byte,
                                           size_t uPos)
{
   UsefulOutBuf_InsertData(me, &byte, 1, uPos);
}


static inline void UsefulOutBuf_InsertUint16(UsefulOutBuf *me,
                                             uint16_t uInteger16,
                                             size_t uPos)
{
   /* See UsefulOutBuf_InsertUint64() for comments on this code */

   const void *pBytes;

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN)
   pBytes = &uInteger16;

#elif defined(USEFULBUF_CONFIG_HTON)
   uint16_t uTmp = htons(uInteger16);
   pBytes        = &uTmp;

#elif defined(USEFULBUF_CONFIG_LITTLE_ENDIAN) && defined(USEFULBUF_CONFIG_BSWAP)
   uint16_t uTmp = __builtin_bswap16(uInteger16);
   pBytes = &uTmp;

#else
   uint8_t aTmp[2];

   aTmp[0] = (uint8_t)((uInteger16 & 0xff00) >> 8);
   aTmp[1] = (uint8_t)(uInteger16 & 0xff);

   pBytes = aTmp;
#endif

   UsefulOutBuf_InsertData(me, pBytes, 2, uPos);
}


static inline void UsefulOutBuf_InsertUint32(UsefulOutBuf *pMe,
                                             uint32_t uInteger32,
                                             size_t uPos)
{
   /* See UsefulOutBuf_InsertUint64() for comments on this code */

   const void *pBytes;

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN)
   pBytes = &uInteger32;

#elif defined(USEFULBUF_CONFIG_HTON)
   uint32_t uTmp = htonl(uInteger32);
   pBytes = &uTmp;

#elif defined(USEFULBUF_CONFIG_LITTLE_ENDIAN) && defined(USEFULBUF_CONFIG_BSWAP)
   uint32_t uTmp = __builtin_bswap32(uInteger32);

   pBytes = &uTmp;

#else
   uint8_t aTmp[4];

   aTmp[0] = (uint8_t)((uInteger32 & 0xff000000) >> 24);
   aTmp[1] = (uint8_t)((uInteger32 & 0xff0000) >> 16);
   aTmp[2] = (uint8_t)((uInteger32 & 0xff00) >> 8);
   aTmp[3] = (uint8_t)(uInteger32 & 0xff);

   pBytes = aTmp;
#endif

   UsefulOutBuf_InsertData(pMe, pBytes, 4, uPos);
}

static inline void UsefulOutBuf_InsertUint64(UsefulOutBuf *pMe,
                                             uint64_t      uInteger64,
                                             size_t        uPos)
{
   const void *pBytes;

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN)
   /* We have been told explicitly we are running on a big-endian
    * machine. Network byte order is big endian, so just copy.  There
    * is no issue with alignment here because uInteger64 is always
    * aligned (and it doesn't matter if pBytes is aligned).
    */
   pBytes = &uInteger64;

#elif defined(USEFULBUF_CONFIG_HTON)
   /* Use system function to handle big- and little-endian. This works
    * on both big- and little-endian machines, but hton() is not
    * always available or in a standard place so it is not used by
    * default. With some compilers and CPUs the code for this is very
    * compact through use of a special swap instruction and on
    * big-endian machines hton() will reduce to nothing.
    */
   uint64_t uTmp = htonll(uInteger64);

   pBytes = &uTmp;

#elif defined(USEFULBUF_CONFIG_LITTLE_ENDIAN) && defined(USEFULBUF_CONFIG_BSWAP)
   /* Use built-in function for byte swapping. This usually compiles
    * to an efficient special byte swap instruction. Unlike hton() it
    * does not do this conditionally on the CPU endianness, so this
    * code is also conditional on USEFULBUF_CONFIG_LITTLE_ENDIAN
    */
   uint64_t uTmp = __builtin_bswap64(uInteger64);

   pBytes = &uTmp;

#else
   /* Default which works on every CPU with no dependency on anything
    * from the CPU, compiler, libraries or OS.  This always works, but
    * it is usually a little larger and slower than hton().
    */
   uint8_t aTmp[8];

   aTmp[0] = (uint8_t)((uInteger64 & 0xff00000000000000) >> 56);
   aTmp[1] = (uint8_t)((uInteger64 & 0xff000000000000) >> 48);
   aTmp[2] = (uint8_t)((uInteger64 & 0xff0000000000) >> 40);
   aTmp[3] = (uint8_t)((uInteger64 & 0xff00000000) >> 32);
   aTmp[4] = (uint8_t)((uInteger64 & 0xff000000) >> 24);
   aTmp[5] = (uint8_t)((uInteger64 & 0xff0000) >> 16);
   aTmp[6] = (uint8_t)((uInteger64 & 0xff00) >> 8);
   aTmp[7] = (uint8_t)(uInteger64 & 0xff);

   pBytes = aTmp;
#endif

   /* Do the insert */
   UsefulOutBuf_InsertData(pMe, pBytes, sizeof(uint64_t), uPos);
}


#ifndef USEFULBUF_DISABLE_ALL_FLOAT
static inline void UsefulOutBuf_InsertFloat(UsefulOutBuf *pMe,
                                            float f,
                                            size_t uPos)
{
   UsefulOutBuf_InsertUint32(pMe, UsefulBufUtil_CopyFloatToUint32(f), uPos);
}


static inline void UsefulOutBuf_InsertDouble(UsefulOutBuf *pMe,
                                             double d,
                                             size_t uPos)
{
   UsefulOutBuf_InsertUint64(pMe, UsefulBufUtil_CopyDoubleToUint64(d), uPos);
}
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */


static inline void UsefulOutBuf_AppendUsefulBuf(UsefulOutBuf *pMe,
                                                UsefulBufC NewData)
{
   /* An append is just a insert at the end */
   UsefulOutBuf_InsertUsefulBuf(pMe, NewData, UsefulOutBuf_GetEndPosition(pMe));
}


static inline void UsefulOutBuf_AppendData(UsefulOutBuf *pMe,
                                           const void *pBytes,
                                           size_t uLen)
{
   UsefulBufC Data = {pBytes, uLen};
   UsefulOutBuf_AppendUsefulBuf(pMe, Data);
}


static inline void UsefulOutBuf_AppendString(UsefulOutBuf *pMe,
                                             const char *szString)
{
   UsefulBufC UBC;
   UBC.ptr = szString;
   UBC.len = strlen(szString);

   UsefulOutBuf_AppendUsefulBuf(pMe, UBC);
}


static inline void UsefulOutBuf_AppendByte(UsefulOutBuf *pMe,
                                           uint8_t byte)
{
   UsefulOutBuf_AppendData(pMe, &byte, 1);
}


static inline void UsefulOutBuf_AppendUint16(UsefulOutBuf *pMe,
                                             uint16_t uInteger16)
{
   UsefulOutBuf_InsertUint16(pMe, uInteger16, UsefulOutBuf_GetEndPosition(pMe));
}

static inline void UsefulOutBuf_AppendUint32(UsefulOutBuf *pMe,
                                             uint32_t uInteger32)
{
   UsefulOutBuf_InsertUint32(pMe, uInteger32, UsefulOutBuf_GetEndPosition(pMe));
}


static inline void UsefulOutBuf_AppendUint64(UsefulOutBuf *pMe,
                                             uint64_t uInteger64)
{
   UsefulOutBuf_InsertUint64(pMe, uInteger64, UsefulOutBuf_GetEndPosition(pMe));
}


#ifndef USEFULBUF_DISABLE_ALL_FLOAT
static inline void UsefulOutBuf_AppendFloat(UsefulOutBuf *pMe,
                                            float f)
{
   UsefulOutBuf_InsertFloat(pMe, f, UsefulOutBuf_GetEndPosition(pMe));
}


static inline void UsefulOutBuf_AppendDouble(UsefulOutBuf *pMe,
                                             double d)
{
   UsefulOutBuf_InsertDouble(pMe, d, UsefulOutBuf_GetEndPosition(pMe));
}
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */


static inline int UsefulOutBuf_GetError(UsefulOutBuf *pMe)
{
   return pMe->err;
}


static inline size_t UsefulOutBuf_RoomLeft(UsefulOutBuf *pMe)
{
   return pMe->UB.len - pMe->data_len;
}


static inline int UsefulOutBuf_WillItFit(UsefulOutBuf *pMe, size_t uLen)
{
   return uLen <= UsefulOutBuf_RoomLeft(pMe);
}


static inline int UsefulOutBuf_IsBufferNULL(UsefulOutBuf *pMe)
{
   return pMe->UB.ptr == NULL;
}


static inline UsefulBuf UsefulOutBuf_GetOutPlace(UsefulOutBuf *pUOutBuf)
{
   UsefulBuf R;

   R.len = UsefulOutBuf_RoomLeft(pUOutBuf);
   if(R.len > 0) {
      R.ptr = (uint8_t *)pUOutBuf->UB.ptr + pUOutBuf->data_len;
   } else {
      R.ptr = NULL;
   }

   return R;
}




static inline void UsefulInputBuf_Init(UsefulInputBuf *pMe, UsefulBufC UB)
{
   pMe->cursor = 0;
   pMe->err    = 0;
   pMe->magic  = UIB_MAGIC;
   pMe->UB     = UB;
}

static inline size_t UsefulInputBuf_Tell(UsefulInputBuf *pMe)
{
   return pMe->cursor;
}


static inline size_t UsefulInputBuf_GetBufferLength(UsefulInputBuf *pMe)
{
    return pMe->UB.len;
}


static inline void UsefulInputBuf_Seek(UsefulInputBuf *pMe, size_t uPos)
{
   if(uPos > pMe->UB.len) {
      pMe->err = 1;
   } else {
      pMe->cursor = uPos;
   }
}


static inline size_t UsefulInputBuf_BytesUnconsumed(UsefulInputBuf *pMe)
{
   /* Code Reviewers: THIS FUNCTION DOES POINTER MATH */

   /* Magic number is messed up. Either the structure got overwritten
    * or was never initialized.
    */
   if(pMe->magic != UIB_MAGIC) {
      return 0;
   }

   /* The cursor is off the end of the input buffer given.
    * Presuming there are no bugs in this code, this should never happen.
    * If it so, the struct was corrupted. The check is retained as
    * as a defense in case there is a bug in this code or the struct is
    * corrupted.
    */
   if(pMe->cursor > pMe->UB.len) {
      return 0;
   }

   /* subtraction can't go negative because of check above */
   return pMe->UB.len - pMe->cursor;
}


static inline int UsefulInputBuf_BytesAvailable(UsefulInputBuf *pMe, size_t uLen)
{
   return UsefulInputBuf_BytesUnconsumed(pMe) >= uLen ? 1 : 0;
}


static inline size_t UsefulInputBuf_PointerToOffset(UsefulInputBuf *pUInBuf, const void *p)
{
   return UsefulBuf_PointerToOffset(pUInBuf->UB, p);
}


static inline UsefulBufC UsefulInputBuf_GetUsefulBuf(UsefulInputBuf *pMe, size_t uNum)
{
   const void *pResult = UsefulInputBuf_GetBytes(pMe, uNum);
   if(!pResult) {
      return NULLUsefulBufC;
   } else {
      UsefulBufC UBC;
      UBC.ptr = pResult;
      UBC.len = uNum;
      return UBC;
   }
}


static inline uint8_t UsefulInputBuf_GetByte(UsefulInputBuf *pMe)
{
   const void *pResult = UsefulInputBuf_GetBytes(pMe, sizeof(uint8_t));

   /* The ternary operator is subject to integer promotion, because
    * the operands are smaller than int, so cast back to uint8_t is
    * needed to be completely explicit about types (for static
    * analyzers).
    */
   return (uint8_t)(pResult ? *(const uint8_t *)pResult : 0);
}

static inline uint16_t UsefulInputBuf_GetUint16(UsefulInputBuf *pMe)
{
   const uint8_t *pResult = (const uint8_t *)UsefulInputBuf_GetBytes(pMe, sizeof(uint16_t));

   if(!pResult) {
      return 0;
   }

   /* See UsefulInputBuf_GetUint64() for comments on this code */
#if defined(USEFULBUF_CONFIG_BIG_ENDIAN) || defined(USEFULBUF_CONFIG_HTON) || defined(USEFULBUF_CONFIG_BSWAP)
   uint16_t uTmp;
   memcpy(&uTmp, pResult, sizeof(uint16_t));

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN)
   return uTmp;

#elif defined(USEFULBUF_CONFIG_HTON)
   return ntohs(uTmp);

#else
   return __builtin_bswap16(uTmp);

#endif

#else

   /* The operations here are subject to integer promotion because the
    * operands are smaller than int. They will be promoted to unsigned
    * int for the shift and addition. The cast back to uint16_t is is
    * needed to be completely explicit about types (for static
    * analyzers).
    */
   return (uint16_t)((pResult[0] << 8) + pResult[1]);

#endif
}


static inline uint32_t UsefulInputBuf_GetUint32(UsefulInputBuf *pMe)
{
   const uint8_t *pResult = (const uint8_t *)UsefulInputBuf_GetBytes(pMe, sizeof(uint32_t));

   if(!pResult) {
      return 0;
   }

   /* See UsefulInputBuf_GetUint64() for comments on this code */
#if defined(USEFULBUF_CONFIG_BIG_ENDIAN) || defined(USEFULBUF_CONFIG_HTON) || defined(USEFULBUF_CONFIG_BSWAP)
   uint32_t uTmp;
   memcpy(&uTmp, pResult, sizeof(uint32_t));

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN)
   return uTmp;

#elif defined(USEFULBUF_CONFIG_HTON)
   return ntohl(uTmp);

#else
   return __builtin_bswap32(uTmp);

#endif

#else
   return ((uint32_t)pResult[0]<<24) +
          ((uint32_t)pResult[1]<<16) +
          ((uint32_t)pResult[2]<<8)  +
           (uint32_t)pResult[3];
#endif
}


static inline uint64_t UsefulInputBuf_GetUint64(UsefulInputBuf *pMe)
{
   const uint8_t *pResult = (const uint8_t *)UsefulInputBuf_GetBytes(pMe, sizeof(uint64_t));

   if(!pResult) {
      return 0;
   }

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN) || defined(USEFULBUF_CONFIG_HTON) || defined(USEFULBUF_CONFIG_BSWAP)
   /* pResult will probably not be aligned.  This memcpy() moves the
    * bytes into a temp variable safely for CPUs that can or can't do
    * unaligned memory access. Many compilers will optimize the
    * memcpy() into a simple move instruction.
    */
   uint64_t uTmp;
   memcpy(&uTmp, pResult, sizeof(uint64_t));

#if defined(USEFULBUF_CONFIG_BIG_ENDIAN)
   /* We have been told expliclity this is a big-endian CPU.  Since
    * network byte order is big-endian, there is nothing to do.
    */

   return uTmp;

#elif defined(USEFULBUF_CONFIG_HTON)
   /* We have been told to use ntoh(), the system function to handle
    * big- and little-endian. This works on both big- and
    * little-endian machines, but ntoh() is not always available or in
    * a standard place so it is not used by default. On some CPUs the
    * code for this is very compact through use of a special swap
    * instruction.
    */

   return ntohll(uTmp);

#else
   /* Little-endian (since it is not USEFULBUF_CONFIG_BIG_ENDIAN) and
    * USEFULBUF_CONFIG_BSWAP (since it is not USEFULBUF_CONFIG_HTON).
    * __builtin_bswap64() and friends are not conditional on CPU
    * endianness so this must only be used on little-endian machines.
    */

   return __builtin_bswap64(uTmp);


#endif

#else
   /* This is the default code that works on every CPU and every
    * endianness with no dependency on ntoh().  This works on CPUs
    * that either allow or do not allow unaligned access. It will
    * always work, but usually is a little less efficient than ntoh().
    */

   return   ((uint64_t)pResult[0]<<56) +
            ((uint64_t)pResult[1]<<48) +
            ((uint64_t)pResult[2]<<40) +
            ((uint64_t)pResult[3]<<32) +
            ((uint64_t)pResult[4]<<24) +
            ((uint64_t)pResult[5]<<16) +
            ((uint64_t)pResult[6]<<8)  +
            (uint64_t)pResult[7];
#endif
}


#ifndef USEFULBUF_DISABLE_ALL_FLOAT
static inline float UsefulInputBuf_GetFloat(UsefulInputBuf *pMe)
{
   uint32_t uResult = UsefulInputBuf_GetUint32(pMe);

   return uResult ? UsefulBufUtil_CopyUint32ToFloat(uResult) : 0;
}


static inline double UsefulInputBuf_GetDouble(UsefulInputBuf *pMe)
{
   uint64_t uResult = UsefulInputBuf_GetUint64(pMe);

   return uResult ? UsefulBufUtil_CopyUint64ToDouble(uResult) : 0;
}
#endif /* USEFULBUF_DISABLE_ALL_FLOAT */


static inline int UsefulInputBuf_GetError(UsefulInputBuf *pMe)
{
   return pMe->err;
}


static inline void UsefulInputBuf_SetBufferLength(UsefulInputBuf *pMe, size_t uNewLen)
{
    pMe->UB.len = uNewLen;
}


#ifdef __cplusplus
}
#endif

#endif  /* _UsefulBuf_h */