changed SystemInit function, add SVD files
diff --git a/Device/ARM/SVD/ARMv8MML.svd b/Device/ARM/SVD/ARMv8MML.svd
new file mode 100644
index 0000000..b9a639f
--- /dev/null
+++ b/Device/ARM/SVD/ARMv8MML.svd
@@ -0,0 +1,262 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!-- File naming: <part/series name>.svd -->
+
+<!--
+ Copyright (C) 2012-2014 ARM Limited. All rights reserved.
+
+ Purpose: System Viewer Description (SVD) Example (Schema Version 1.1)
+ This is a description of a none-existent and incomplete device
+ for demonstration purposes only.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ -->
+
+<device schemaVersion="1.3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd" >
+ <vendor>ARM Ltd.</vendor> <!-- device vendor name -->
+ <vendorID>ARM</vendorID> <!-- device vendor short name -->
+ <name>ARMv8MML</name> <!-- name of part-->
+ <series>ARMV8M</series> <!-- device series the device belongs to -->
+ <version>1.0</version> <!-- version of this description, adding CMSIS-SVD 1.1 tags -->
+ <description>ARM 32-bit v8-M Baseline based device</description>
+ <licenseText> <!-- this license text will appear in header file. \n force line breaks -->
+ ARM Limited (ARM) is supplying this software for use with Cortex-M\n
+ processor based microcontroller, but can be equally used for other\n
+ suitable processor architectures. This file can be freely distributed.\n
+ Modifications to this file shall be clearly marked.\n
+ \n
+ THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED\n
+ OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF\n
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.\n
+ ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR\n
+ CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ </licenseText>
+ <cpu> <!-- details about the cpu embedded in the device -->
+ <name>CM4</name>
+ <revision>r0p0</revision>
+ <endian>little</endian>
+ <mpuPresent>true</mpuPresent>
+ <fpuPresent>false</fpuPresent>
+ <nvicPrioBits>3</nvicPrioBits>
+ <vendorSystickConfig>false</vendorSystickConfig>
+ <sauNumRegions>4</sauNumRegions>
+ <sauRegionsConfig enabled="true" protectionWhenDisabled="s">
+ <region enabled="true" name="SauRegion0">
+ <base>0x00000000</base>
+ <limit>0x001FFFE0</limit>
+ <!-- secure / non-secure callable -->
+ <access>c</access>
+ </region>
+ <region enabled="true" name="SauRegion1">
+ <base>0x00200000</base>
+ <limit>0x003FFFE0</limit>
+ <!-- non-secure -->
+ <access>n</access>
+ </region>
+ <region enabled="true" name="SauRegion2">
+ <base>0x20200000</base>
+ <limit>0x203FFFE0</limit>
+ <!-- non-secure -->
+ <access>n</access>
+ </region>
+ <region enabled="true" name="SauRegion3">
+ <base>0x40000000</base>
+ <limit>0x40040000</limit>
+ <!-- non-secure -->
+ <access>n</access>
+ </region>
+ </sauRegionsConfig>
+
+ </cpu>
+ <addressUnitBits>8</addressUnitBits> <!-- byte addressable memory -->
+ <width>32</width> <!-- bus width is 32 bits -->
+ <!-- default settings implicitly inherited by subsequent sections -->
+ <size>32</size> <!-- this is the default size (number of bits) of all peripherals
+ and register that do not define "size" themselves -->
+ <access>read-write</access> <!-- default access permission for all subsequent registers -->
+ <resetValue>0x00000000</resetValue> <!-- by default all bits of the registers are initialized to 0 on reset -->
+ <resetMask>0xFFFFFFFF</resetMask> <!-- by default all 32Bits of the registers are used -->
+
+ <peripherals>
+ <!-- Timer 0 -->
+ <peripheral>
+ <name>SAU</name>
+ <version>1.0</version>
+ <description>Security Attribution Unit</description>
+ <groupName>SAU</groupName>
+ <baseAddress>0xE000EDD0</baseAddress>
+ <size>32</size>
+ <access>read-write</access>
+
+ <addressBlock>
+ <offset>0</offset>
+ <size>0x20</size>
+ <usage>registers</usage>
+ </addressBlock>
+
+ <registers>
+ <!-- CTRL: Control Register -->
+ <register>
+ <name>CTRL</name>
+ <description>Control Register</description>
+ <addressOffset>0x00</addressOffset>
+ <fields>
+ <!-- EN: Enable -->
+ <field>
+ <name>ENABLE</name>
+ <description>Enable</description>
+ <bitRange>[0:0]</bitRange>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Disable</name>
+ <description>SAU is disabled</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Enable</name>
+ <description>SAU is enabled</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+
+ <!-- RST: Reset -->
+ <field>
+ <name>ALLNS</name>
+ <description>Security attribution if SAU disabled</description>
+ <bitRange>[1:1]</bitRange>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>Secure</name>
+ <description>Memory is marked as secure</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>Non_Secure</name>
+ <description>Memory is marked as non-secure</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ </fields>
+ </register>
+
+ <!-- TYPE: -->
+ <register>
+ <name>TYPE</name>
+ <description>Type Register</description>
+ <addressOffset>0x04</addressOffset>
+ <access>read-only</access>
+ <fields>
+ <!-- SREGION: -->
+ <field>
+ <name>SREGION</name>
+ <description>Number of implemented SAU regions</description>
+ <bitRange>[7:0]</bitRange>
+ </field>
+ </fields>
+ </register>
+
+ <!-- RNR: -->
+ <register>
+ <name>RNR</name>
+ <description>Region Number Register</description>
+ <addressOffset>0x08</addressOffset>
+ <fields>
+ <!-- REGION: -->
+ <field>
+ <name>REGION</name>
+ <description>Currently selected SAU region</description>
+ <bitRange>[7:0]</bitRange>
+ <enumeratedValues>
+ <enumeratedValue>
+ <name>SAU_Region_0</name>
+ <description>Select SAU Region 0</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>SAU_Region_1</name>
+ <description>Select SAU Region 1</description>
+ <value>1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>SAU_Region_2</name>
+ <description>Select SAU Region 2</description>
+ <value>2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>SAU_Region_3</name>
+ <description>Select SAU Region 3</description>
+ <value>3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ </fields>
+ </register>
+
+ <!-- RBAR: -->
+ <register>
+ <name>RBAR</name>
+ <description>Region Base Address Register</description>
+ <addressOffset>0x0C</addressOffset>
+ <fields>
+ <!-- BADDR: -->
+ <field>
+ <name>BADDR</name>
+ <description>Base Address</description>
+ <bitRange>[31:5]</bitRange>
+ </field>
+ </fields>
+ </register>
+
+ <!-- RBAR: -->
+ <register>
+ <name>RLAR</name>
+ <description>Region Limit Address Register</description>
+ <addressOffset>0x10</addressOffset>
+ <fields>
+ <!-- LADDR: -->
+ <field>
+ <name>LADDR</name>
+ <description>Limit Address</description>
+ <bitRange>[31:5]</bitRange>
+ </field>
+ <!-- NSC: -->
+ <field>
+ <name>NSC</name>
+ <description>Non-Secure Callable</description>
+ <bitRange>[1:1]</bitRange>
+ </field>
+ <!-- ENABLE: -->
+ <field>
+ <name>ENABLE</name>
+ <description>SAU Region enabled</description>
+ <bitRange>[0:0]</bitRange>
+ </field>
+ </fields>
+ </register>
+ </registers>
+ </peripheral>
+ </peripherals>
+</device>