Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright IBM Corp. 2016 |
| 4 | * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> |
| 5 | * |
| 6 | * Adjunct processor bus, queue related code. |
| 7 | */ |
| 8 | |
| 9 | #define KMSG_COMPONENT "ap" |
| 10 | #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| 11 | |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/slab.h> |
| 14 | #include <asm/facility.h> |
| 15 | |
| 16 | #include "ap_bus.h" |
| 17 | |
| 18 | /** |
| 19 | * ap_queue_enable_interruption(): Enable interruption on an AP queue. |
| 20 | * @qid: The AP queue number |
| 21 | * @ind: the notification indicator byte |
| 22 | * |
| 23 | * Enables interruption on AP queue via ap_aqic(). Based on the return |
| 24 | * value it waits a while and tests the AP queue if interrupts |
| 25 | * have been switched on using ap_test_queue(). |
| 26 | */ |
| 27 | static int ap_queue_enable_interruption(struct ap_queue *aq, void *ind) |
| 28 | { |
| 29 | struct ap_queue_status status; |
| 30 | struct ap_qirq_ctrl qirqctrl = { 0 }; |
| 31 | |
| 32 | qirqctrl.ir = 1; |
| 33 | qirqctrl.isc = AP_ISC; |
| 34 | status = ap_aqic(aq->qid, qirqctrl, ind); |
| 35 | switch (status.response_code) { |
| 36 | case AP_RESPONSE_NORMAL: |
| 37 | case AP_RESPONSE_OTHERWISE_CHANGED: |
| 38 | return 0; |
| 39 | case AP_RESPONSE_Q_NOT_AVAIL: |
| 40 | case AP_RESPONSE_DECONFIGURED: |
| 41 | case AP_RESPONSE_CHECKSTOPPED: |
| 42 | case AP_RESPONSE_INVALID_ADDRESS: |
| 43 | pr_err("Registering adapter interrupts for AP device %02x.%04x failed\n", |
| 44 | AP_QID_CARD(aq->qid), |
| 45 | AP_QID_QUEUE(aq->qid)); |
| 46 | return -EOPNOTSUPP; |
| 47 | case AP_RESPONSE_RESET_IN_PROGRESS: |
| 48 | case AP_RESPONSE_BUSY: |
| 49 | default: |
| 50 | return -EBUSY; |
| 51 | } |
| 52 | } |
| 53 | |
| 54 | /** |
| 55 | * __ap_send(): Send message to adjunct processor queue. |
| 56 | * @qid: The AP queue number |
| 57 | * @psmid: The program supplied message identifier |
| 58 | * @msg: The message text |
| 59 | * @length: The message length |
| 60 | * @special: Special Bit |
| 61 | * |
| 62 | * Returns AP queue status structure. |
| 63 | * Condition code 1 on NQAP can't happen because the L bit is 1. |
| 64 | * Condition code 2 on NQAP also means the send is incomplete, |
| 65 | * because a segment boundary was reached. The NQAP is repeated. |
| 66 | */ |
| 67 | static inline struct ap_queue_status |
| 68 | __ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length, |
| 69 | unsigned int special) |
| 70 | { |
| 71 | if (special == 1) |
| 72 | qid |= 0x400000UL; |
| 73 | return ap_nqap(qid, psmid, msg, length); |
| 74 | } |
| 75 | |
| 76 | int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length) |
| 77 | { |
| 78 | struct ap_queue_status status; |
| 79 | |
| 80 | status = __ap_send(qid, psmid, msg, length, 0); |
| 81 | switch (status.response_code) { |
| 82 | case AP_RESPONSE_NORMAL: |
| 83 | return 0; |
| 84 | case AP_RESPONSE_Q_FULL: |
| 85 | case AP_RESPONSE_RESET_IN_PROGRESS: |
| 86 | return -EBUSY; |
| 87 | case AP_RESPONSE_REQ_FAC_NOT_INST: |
| 88 | return -EINVAL; |
| 89 | default: /* Device is gone. */ |
| 90 | return -ENODEV; |
| 91 | } |
| 92 | } |
| 93 | EXPORT_SYMBOL(ap_send); |
| 94 | |
| 95 | int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length) |
| 96 | { |
| 97 | struct ap_queue_status status; |
| 98 | |
| 99 | if (msg == NULL) |
| 100 | return -EINVAL; |
| 101 | status = ap_dqap(qid, psmid, msg, length); |
| 102 | switch (status.response_code) { |
| 103 | case AP_RESPONSE_NORMAL: |
| 104 | return 0; |
| 105 | case AP_RESPONSE_NO_PENDING_REPLY: |
| 106 | if (status.queue_empty) |
| 107 | return -ENOENT; |
| 108 | return -EBUSY; |
| 109 | case AP_RESPONSE_RESET_IN_PROGRESS: |
| 110 | return -EBUSY; |
| 111 | default: |
| 112 | return -ENODEV; |
| 113 | } |
| 114 | } |
| 115 | EXPORT_SYMBOL(ap_recv); |
| 116 | |
| 117 | /* State machine definitions and helpers */ |
| 118 | |
| 119 | static enum ap_wait ap_sm_nop(struct ap_queue *aq) |
| 120 | { |
| 121 | return AP_WAIT_NONE; |
| 122 | } |
| 123 | |
| 124 | /** |
| 125 | * ap_sm_recv(): Receive pending reply messages from an AP queue but do |
| 126 | * not change the state of the device. |
| 127 | * @aq: pointer to the AP queue |
| 128 | * |
| 129 | * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT |
| 130 | */ |
| 131 | static struct ap_queue_status ap_sm_recv(struct ap_queue *aq) |
| 132 | { |
| 133 | struct ap_queue_status status; |
| 134 | struct ap_message *ap_msg; |
| 135 | |
| 136 | status = ap_dqap(aq->qid, &aq->reply->psmid, |
| 137 | aq->reply->message, aq->reply->length); |
| 138 | switch (status.response_code) { |
| 139 | case AP_RESPONSE_NORMAL: |
| 140 | aq->queue_count--; |
| 141 | if (aq->queue_count > 0) |
| 142 | mod_timer(&aq->timeout, |
| 143 | jiffies + aq->request_timeout); |
| 144 | list_for_each_entry(ap_msg, &aq->pendingq, list) { |
| 145 | if (ap_msg->psmid != aq->reply->psmid) |
| 146 | continue; |
| 147 | list_del_init(&ap_msg->list); |
| 148 | aq->pendingq_count--; |
| 149 | ap_msg->receive(aq, ap_msg, aq->reply); |
| 150 | break; |
| 151 | } |
| 152 | case AP_RESPONSE_NO_PENDING_REPLY: |
| 153 | if (!status.queue_empty || aq->queue_count <= 0) |
| 154 | break; |
| 155 | /* The card shouldn't forget requests but who knows. */ |
| 156 | aq->queue_count = 0; |
| 157 | list_splice_init(&aq->pendingq, &aq->requestq); |
| 158 | aq->requestq_count += aq->pendingq_count; |
| 159 | aq->pendingq_count = 0; |
| 160 | break; |
| 161 | default: |
| 162 | break; |
| 163 | } |
| 164 | return status; |
| 165 | } |
| 166 | |
| 167 | /** |
| 168 | * ap_sm_read(): Receive pending reply messages from an AP queue. |
| 169 | * @aq: pointer to the AP queue |
| 170 | * |
| 171 | * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT |
| 172 | */ |
| 173 | static enum ap_wait ap_sm_read(struct ap_queue *aq) |
| 174 | { |
| 175 | struct ap_queue_status status; |
| 176 | |
| 177 | if (!aq->reply) |
| 178 | return AP_WAIT_NONE; |
| 179 | status = ap_sm_recv(aq); |
| 180 | switch (status.response_code) { |
| 181 | case AP_RESPONSE_NORMAL: |
| 182 | if (aq->queue_count > 0) { |
| 183 | aq->state = AP_STATE_WORKING; |
| 184 | return AP_WAIT_AGAIN; |
| 185 | } |
| 186 | aq->state = AP_STATE_IDLE; |
| 187 | return AP_WAIT_NONE; |
| 188 | case AP_RESPONSE_NO_PENDING_REPLY: |
| 189 | if (aq->queue_count > 0) |
| 190 | return AP_WAIT_INTERRUPT; |
| 191 | aq->state = AP_STATE_IDLE; |
| 192 | return AP_WAIT_NONE; |
| 193 | default: |
| 194 | aq->state = AP_STATE_BORKED; |
| 195 | return AP_WAIT_NONE; |
| 196 | } |
| 197 | } |
| 198 | |
| 199 | /** |
| 200 | * ap_sm_suspend_read(): Receive pending reply messages from an AP queue |
| 201 | * without changing the device state in between. In suspend mode we don't |
| 202 | * allow sending new requests, therefore just fetch pending replies. |
| 203 | * @aq: pointer to the AP queue |
| 204 | * |
| 205 | * Returns AP_WAIT_NONE or AP_WAIT_AGAIN |
| 206 | */ |
| 207 | static enum ap_wait ap_sm_suspend_read(struct ap_queue *aq) |
| 208 | { |
| 209 | struct ap_queue_status status; |
| 210 | |
| 211 | if (!aq->reply) |
| 212 | return AP_WAIT_NONE; |
| 213 | status = ap_sm_recv(aq); |
| 214 | switch (status.response_code) { |
| 215 | case AP_RESPONSE_NORMAL: |
| 216 | if (aq->queue_count > 0) |
| 217 | return AP_WAIT_AGAIN; |
| 218 | /* fall through */ |
| 219 | default: |
| 220 | return AP_WAIT_NONE; |
| 221 | } |
| 222 | } |
| 223 | |
| 224 | /** |
| 225 | * ap_sm_write(): Send messages from the request queue to an AP queue. |
| 226 | * @aq: pointer to the AP queue |
| 227 | * |
| 228 | * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT |
| 229 | */ |
| 230 | static enum ap_wait ap_sm_write(struct ap_queue *aq) |
| 231 | { |
| 232 | struct ap_queue_status status; |
| 233 | struct ap_message *ap_msg; |
| 234 | |
| 235 | if (aq->requestq_count <= 0) |
| 236 | return AP_WAIT_NONE; |
| 237 | /* Start the next request on the queue. */ |
| 238 | ap_msg = list_entry(aq->requestq.next, struct ap_message, list); |
| 239 | status = __ap_send(aq->qid, ap_msg->psmid, |
| 240 | ap_msg->message, ap_msg->length, ap_msg->special); |
| 241 | switch (status.response_code) { |
| 242 | case AP_RESPONSE_NORMAL: |
| 243 | aq->queue_count++; |
| 244 | if (aq->queue_count == 1) |
| 245 | mod_timer(&aq->timeout, jiffies + aq->request_timeout); |
| 246 | list_move_tail(&ap_msg->list, &aq->pendingq); |
| 247 | aq->requestq_count--; |
| 248 | aq->pendingq_count++; |
| 249 | if (aq->queue_count < aq->card->queue_depth) { |
| 250 | aq->state = AP_STATE_WORKING; |
| 251 | return AP_WAIT_AGAIN; |
| 252 | } |
| 253 | /* fall through */ |
| 254 | case AP_RESPONSE_Q_FULL: |
| 255 | aq->state = AP_STATE_QUEUE_FULL; |
| 256 | return AP_WAIT_INTERRUPT; |
| 257 | case AP_RESPONSE_RESET_IN_PROGRESS: |
| 258 | aq->state = AP_STATE_RESET_WAIT; |
| 259 | return AP_WAIT_TIMEOUT; |
| 260 | case AP_RESPONSE_MESSAGE_TOO_BIG: |
| 261 | case AP_RESPONSE_REQ_FAC_NOT_INST: |
| 262 | list_del_init(&ap_msg->list); |
| 263 | aq->requestq_count--; |
| 264 | ap_msg->rc = -EINVAL; |
| 265 | ap_msg->receive(aq, ap_msg, NULL); |
| 266 | return AP_WAIT_AGAIN; |
| 267 | default: |
| 268 | aq->state = AP_STATE_BORKED; |
| 269 | return AP_WAIT_NONE; |
| 270 | } |
| 271 | } |
| 272 | |
| 273 | /** |
| 274 | * ap_sm_read_write(): Send and receive messages to/from an AP queue. |
| 275 | * @aq: pointer to the AP queue |
| 276 | * |
| 277 | * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT |
| 278 | */ |
| 279 | static enum ap_wait ap_sm_read_write(struct ap_queue *aq) |
| 280 | { |
| 281 | return min(ap_sm_read(aq), ap_sm_write(aq)); |
| 282 | } |
| 283 | |
| 284 | /** |
| 285 | * ap_sm_reset(): Reset an AP queue. |
| 286 | * @qid: The AP queue number |
| 287 | * |
| 288 | * Submit the Reset command to an AP queue. |
| 289 | */ |
| 290 | static enum ap_wait ap_sm_reset(struct ap_queue *aq) |
| 291 | { |
| 292 | struct ap_queue_status status; |
| 293 | |
| 294 | status = ap_rapq(aq->qid); |
| 295 | switch (status.response_code) { |
| 296 | case AP_RESPONSE_NORMAL: |
| 297 | case AP_RESPONSE_RESET_IN_PROGRESS: |
| 298 | aq->state = AP_STATE_RESET_WAIT; |
| 299 | aq->interrupt = AP_INTR_DISABLED; |
| 300 | return AP_WAIT_TIMEOUT; |
| 301 | case AP_RESPONSE_BUSY: |
| 302 | return AP_WAIT_TIMEOUT; |
| 303 | case AP_RESPONSE_Q_NOT_AVAIL: |
| 304 | case AP_RESPONSE_DECONFIGURED: |
| 305 | case AP_RESPONSE_CHECKSTOPPED: |
| 306 | default: |
| 307 | aq->state = AP_STATE_BORKED; |
| 308 | return AP_WAIT_NONE; |
| 309 | } |
| 310 | } |
| 311 | |
| 312 | /** |
| 313 | * ap_sm_reset_wait(): Test queue for completion of the reset operation |
| 314 | * @aq: pointer to the AP queue |
| 315 | * |
| 316 | * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0. |
| 317 | */ |
| 318 | static enum ap_wait ap_sm_reset_wait(struct ap_queue *aq) |
| 319 | { |
| 320 | struct ap_queue_status status; |
| 321 | void *lsi_ptr; |
| 322 | |
| 323 | if (aq->queue_count > 0 && aq->reply) |
| 324 | /* Try to read a completed message and get the status */ |
| 325 | status = ap_sm_recv(aq); |
| 326 | else |
| 327 | /* Get the status with TAPQ */ |
| 328 | status = ap_tapq(aq->qid, NULL); |
| 329 | |
| 330 | switch (status.response_code) { |
| 331 | case AP_RESPONSE_NORMAL: |
| 332 | lsi_ptr = ap_airq_ptr(); |
| 333 | if (lsi_ptr && ap_queue_enable_interruption(aq, lsi_ptr) == 0) |
| 334 | aq->state = AP_STATE_SETIRQ_WAIT; |
| 335 | else |
| 336 | aq->state = (aq->queue_count > 0) ? |
| 337 | AP_STATE_WORKING : AP_STATE_IDLE; |
| 338 | return AP_WAIT_AGAIN; |
| 339 | case AP_RESPONSE_BUSY: |
| 340 | case AP_RESPONSE_RESET_IN_PROGRESS: |
| 341 | return AP_WAIT_TIMEOUT; |
| 342 | case AP_RESPONSE_Q_NOT_AVAIL: |
| 343 | case AP_RESPONSE_DECONFIGURED: |
| 344 | case AP_RESPONSE_CHECKSTOPPED: |
| 345 | default: |
| 346 | aq->state = AP_STATE_BORKED; |
| 347 | return AP_WAIT_NONE; |
| 348 | } |
| 349 | } |
| 350 | |
| 351 | /** |
| 352 | * ap_sm_setirq_wait(): Test queue for completion of the irq enablement |
| 353 | * @aq: pointer to the AP queue |
| 354 | * |
| 355 | * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0. |
| 356 | */ |
| 357 | static enum ap_wait ap_sm_setirq_wait(struct ap_queue *aq) |
| 358 | { |
| 359 | struct ap_queue_status status; |
| 360 | |
| 361 | if (aq->queue_count > 0 && aq->reply) |
| 362 | /* Try to read a completed message and get the status */ |
| 363 | status = ap_sm_recv(aq); |
| 364 | else |
| 365 | /* Get the status with TAPQ */ |
| 366 | status = ap_tapq(aq->qid, NULL); |
| 367 | |
| 368 | if (status.irq_enabled == 1) { |
| 369 | /* Irqs are now enabled */ |
| 370 | aq->interrupt = AP_INTR_ENABLED; |
| 371 | aq->state = (aq->queue_count > 0) ? |
| 372 | AP_STATE_WORKING : AP_STATE_IDLE; |
| 373 | } |
| 374 | |
| 375 | switch (status.response_code) { |
| 376 | case AP_RESPONSE_NORMAL: |
| 377 | if (aq->queue_count > 0) |
| 378 | return AP_WAIT_AGAIN; |
| 379 | /* fallthrough */ |
| 380 | case AP_RESPONSE_NO_PENDING_REPLY: |
| 381 | return AP_WAIT_TIMEOUT; |
| 382 | default: |
| 383 | aq->state = AP_STATE_BORKED; |
| 384 | return AP_WAIT_NONE; |
| 385 | } |
| 386 | } |
| 387 | |
| 388 | /* |
| 389 | * AP state machine jump table |
| 390 | */ |
| 391 | static ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = { |
| 392 | [AP_STATE_RESET_START] = { |
| 393 | [AP_EVENT_POLL] = ap_sm_reset, |
| 394 | [AP_EVENT_TIMEOUT] = ap_sm_nop, |
| 395 | }, |
| 396 | [AP_STATE_RESET_WAIT] = { |
| 397 | [AP_EVENT_POLL] = ap_sm_reset_wait, |
| 398 | [AP_EVENT_TIMEOUT] = ap_sm_nop, |
| 399 | }, |
| 400 | [AP_STATE_SETIRQ_WAIT] = { |
| 401 | [AP_EVENT_POLL] = ap_sm_setirq_wait, |
| 402 | [AP_EVENT_TIMEOUT] = ap_sm_nop, |
| 403 | }, |
| 404 | [AP_STATE_IDLE] = { |
| 405 | [AP_EVENT_POLL] = ap_sm_write, |
| 406 | [AP_EVENT_TIMEOUT] = ap_sm_nop, |
| 407 | }, |
| 408 | [AP_STATE_WORKING] = { |
| 409 | [AP_EVENT_POLL] = ap_sm_read_write, |
| 410 | [AP_EVENT_TIMEOUT] = ap_sm_reset, |
| 411 | }, |
| 412 | [AP_STATE_QUEUE_FULL] = { |
| 413 | [AP_EVENT_POLL] = ap_sm_read, |
| 414 | [AP_EVENT_TIMEOUT] = ap_sm_reset, |
| 415 | }, |
| 416 | [AP_STATE_SUSPEND_WAIT] = { |
| 417 | [AP_EVENT_POLL] = ap_sm_suspend_read, |
| 418 | [AP_EVENT_TIMEOUT] = ap_sm_nop, |
| 419 | }, |
| 420 | [AP_STATE_BORKED] = { |
| 421 | [AP_EVENT_POLL] = ap_sm_nop, |
| 422 | [AP_EVENT_TIMEOUT] = ap_sm_nop, |
| 423 | }, |
| 424 | }; |
| 425 | |
| 426 | enum ap_wait ap_sm_event(struct ap_queue *aq, enum ap_event event) |
| 427 | { |
| 428 | return ap_jumptable[aq->state][event](aq); |
| 429 | } |
| 430 | |
| 431 | enum ap_wait ap_sm_event_loop(struct ap_queue *aq, enum ap_event event) |
| 432 | { |
| 433 | enum ap_wait wait; |
| 434 | |
| 435 | while ((wait = ap_sm_event(aq, event)) == AP_WAIT_AGAIN) |
| 436 | ; |
| 437 | return wait; |
| 438 | } |
| 439 | |
| 440 | /* |
| 441 | * Power management for queue devices |
| 442 | */ |
| 443 | void ap_queue_suspend(struct ap_device *ap_dev) |
| 444 | { |
| 445 | struct ap_queue *aq = to_ap_queue(&ap_dev->device); |
| 446 | |
| 447 | /* Poll on the device until all requests are finished. */ |
| 448 | spin_lock_bh(&aq->lock); |
| 449 | aq->state = AP_STATE_SUSPEND_WAIT; |
| 450 | while (ap_sm_event(aq, AP_EVENT_POLL) != AP_WAIT_NONE) |
| 451 | ; |
| 452 | aq->state = AP_STATE_BORKED; |
| 453 | spin_unlock_bh(&aq->lock); |
| 454 | } |
| 455 | EXPORT_SYMBOL(ap_queue_suspend); |
| 456 | |
| 457 | void ap_queue_resume(struct ap_device *ap_dev) |
| 458 | { |
| 459 | } |
| 460 | EXPORT_SYMBOL(ap_queue_resume); |
| 461 | |
| 462 | /* |
| 463 | * AP queue related attributes. |
| 464 | */ |
| 465 | static ssize_t request_count_show(struct device *dev, |
| 466 | struct device_attribute *attr, |
| 467 | char *buf) |
| 468 | { |
| 469 | struct ap_queue *aq = to_ap_queue(dev); |
| 470 | unsigned int req_cnt; |
| 471 | |
| 472 | spin_lock_bh(&aq->lock); |
| 473 | req_cnt = aq->total_request_count; |
| 474 | spin_unlock_bh(&aq->lock); |
| 475 | return snprintf(buf, PAGE_SIZE, "%d\n", req_cnt); |
| 476 | } |
| 477 | |
| 478 | static ssize_t request_count_store(struct device *dev, |
| 479 | struct device_attribute *attr, |
| 480 | const char *buf, size_t count) |
| 481 | { |
| 482 | struct ap_queue *aq = to_ap_queue(dev); |
| 483 | |
| 484 | spin_lock_bh(&aq->lock); |
| 485 | aq->total_request_count = 0; |
| 486 | spin_unlock_bh(&aq->lock); |
| 487 | |
| 488 | return count; |
| 489 | } |
| 490 | |
| 491 | static DEVICE_ATTR_RW(request_count); |
| 492 | |
| 493 | static ssize_t requestq_count_show(struct device *dev, |
| 494 | struct device_attribute *attr, char *buf) |
| 495 | { |
| 496 | struct ap_queue *aq = to_ap_queue(dev); |
| 497 | unsigned int reqq_cnt = 0; |
| 498 | |
| 499 | spin_lock_bh(&aq->lock); |
| 500 | reqq_cnt = aq->requestq_count; |
| 501 | spin_unlock_bh(&aq->lock); |
| 502 | return snprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt); |
| 503 | } |
| 504 | |
| 505 | static DEVICE_ATTR_RO(requestq_count); |
| 506 | |
| 507 | static ssize_t pendingq_count_show(struct device *dev, |
| 508 | struct device_attribute *attr, char *buf) |
| 509 | { |
| 510 | struct ap_queue *aq = to_ap_queue(dev); |
| 511 | unsigned int penq_cnt = 0; |
| 512 | |
| 513 | spin_lock_bh(&aq->lock); |
| 514 | penq_cnt = aq->pendingq_count; |
| 515 | spin_unlock_bh(&aq->lock); |
| 516 | return snprintf(buf, PAGE_SIZE, "%d\n", penq_cnt); |
| 517 | } |
| 518 | |
| 519 | static DEVICE_ATTR_RO(pendingq_count); |
| 520 | |
| 521 | static ssize_t reset_show(struct device *dev, |
| 522 | struct device_attribute *attr, char *buf) |
| 523 | { |
| 524 | struct ap_queue *aq = to_ap_queue(dev); |
| 525 | int rc = 0; |
| 526 | |
| 527 | spin_lock_bh(&aq->lock); |
| 528 | switch (aq->state) { |
| 529 | case AP_STATE_RESET_START: |
| 530 | case AP_STATE_RESET_WAIT: |
| 531 | rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n"); |
| 532 | break; |
| 533 | case AP_STATE_WORKING: |
| 534 | case AP_STATE_QUEUE_FULL: |
| 535 | rc = snprintf(buf, PAGE_SIZE, "Reset Timer armed.\n"); |
| 536 | break; |
| 537 | default: |
| 538 | rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n"); |
| 539 | } |
| 540 | spin_unlock_bh(&aq->lock); |
| 541 | return rc; |
| 542 | } |
| 543 | |
| 544 | static DEVICE_ATTR_RO(reset); |
| 545 | |
| 546 | static ssize_t interrupt_show(struct device *dev, |
| 547 | struct device_attribute *attr, char *buf) |
| 548 | { |
| 549 | struct ap_queue *aq = to_ap_queue(dev); |
| 550 | int rc = 0; |
| 551 | |
| 552 | spin_lock_bh(&aq->lock); |
| 553 | if (aq->state == AP_STATE_SETIRQ_WAIT) |
| 554 | rc = snprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n"); |
| 555 | else if (aq->interrupt == AP_INTR_ENABLED) |
| 556 | rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n"); |
| 557 | else |
| 558 | rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n"); |
| 559 | spin_unlock_bh(&aq->lock); |
| 560 | return rc; |
| 561 | } |
| 562 | |
| 563 | static DEVICE_ATTR_RO(interrupt); |
| 564 | |
| 565 | static struct attribute *ap_queue_dev_attrs[] = { |
| 566 | &dev_attr_request_count.attr, |
| 567 | &dev_attr_requestq_count.attr, |
| 568 | &dev_attr_pendingq_count.attr, |
| 569 | &dev_attr_reset.attr, |
| 570 | &dev_attr_interrupt.attr, |
| 571 | NULL |
| 572 | }; |
| 573 | |
| 574 | static struct attribute_group ap_queue_dev_attr_group = { |
| 575 | .attrs = ap_queue_dev_attrs |
| 576 | }; |
| 577 | |
| 578 | static const struct attribute_group *ap_queue_dev_attr_groups[] = { |
| 579 | &ap_queue_dev_attr_group, |
| 580 | NULL |
| 581 | }; |
| 582 | |
| 583 | static struct device_type ap_queue_type = { |
| 584 | .name = "ap_queue", |
| 585 | .groups = ap_queue_dev_attr_groups, |
| 586 | }; |
| 587 | |
| 588 | static void ap_queue_device_release(struct device *dev) |
| 589 | { |
| 590 | struct ap_queue *aq = to_ap_queue(dev); |
| 591 | |
| 592 | if (!list_empty(&aq->list)) { |
| 593 | spin_lock_bh(&ap_list_lock); |
| 594 | list_del_init(&aq->list); |
| 595 | spin_unlock_bh(&ap_list_lock); |
| 596 | } |
| 597 | kfree(aq); |
| 598 | } |
| 599 | |
| 600 | struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type) |
| 601 | { |
| 602 | struct ap_queue *aq; |
| 603 | |
| 604 | aq = kzalloc(sizeof(*aq), GFP_KERNEL); |
| 605 | if (!aq) |
| 606 | return NULL; |
| 607 | aq->ap_dev.device.release = ap_queue_device_release; |
| 608 | aq->ap_dev.device.type = &ap_queue_type; |
| 609 | aq->ap_dev.device_type = device_type; |
| 610 | aq->qid = qid; |
| 611 | aq->state = AP_STATE_RESET_START; |
| 612 | aq->interrupt = AP_INTR_DISABLED; |
| 613 | spin_lock_init(&aq->lock); |
| 614 | INIT_LIST_HEAD(&aq->list); |
| 615 | INIT_LIST_HEAD(&aq->pendingq); |
| 616 | INIT_LIST_HEAD(&aq->requestq); |
| 617 | timer_setup(&aq->timeout, ap_request_timeout, 0); |
| 618 | |
| 619 | return aq; |
| 620 | } |
| 621 | |
| 622 | void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *reply) |
| 623 | { |
| 624 | aq->reply = reply; |
| 625 | |
| 626 | spin_lock_bh(&aq->lock); |
| 627 | ap_wait(ap_sm_event(aq, AP_EVENT_POLL)); |
| 628 | spin_unlock_bh(&aq->lock); |
| 629 | } |
| 630 | EXPORT_SYMBOL(ap_queue_init_reply); |
| 631 | |
| 632 | /** |
| 633 | * ap_queue_message(): Queue a request to an AP device. |
| 634 | * @aq: The AP device to queue the message to |
| 635 | * @ap_msg: The message that is to be added |
| 636 | */ |
| 637 | void ap_queue_message(struct ap_queue *aq, struct ap_message *ap_msg) |
| 638 | { |
| 639 | /* For asynchronous message handling a valid receive-callback |
| 640 | * is required. |
| 641 | */ |
| 642 | BUG_ON(!ap_msg->receive); |
| 643 | |
| 644 | spin_lock_bh(&aq->lock); |
| 645 | /* Queue the message. */ |
| 646 | list_add_tail(&ap_msg->list, &aq->requestq); |
| 647 | aq->requestq_count++; |
| 648 | aq->total_request_count++; |
| 649 | atomic_inc(&aq->card->total_request_count); |
| 650 | /* Send/receive as many request from the queue as possible. */ |
| 651 | ap_wait(ap_sm_event_loop(aq, AP_EVENT_POLL)); |
| 652 | spin_unlock_bh(&aq->lock); |
| 653 | } |
| 654 | EXPORT_SYMBOL(ap_queue_message); |
| 655 | |
| 656 | /** |
| 657 | * ap_cancel_message(): Cancel a crypto request. |
| 658 | * @aq: The AP device that has the message queued |
| 659 | * @ap_msg: The message that is to be removed |
| 660 | * |
| 661 | * Cancel a crypto request. This is done by removing the request |
| 662 | * from the device pending or request queue. Note that the |
| 663 | * request stays on the AP queue. When it finishes the message |
| 664 | * reply will be discarded because the psmid can't be found. |
| 665 | */ |
| 666 | void ap_cancel_message(struct ap_queue *aq, struct ap_message *ap_msg) |
| 667 | { |
| 668 | struct ap_message *tmp; |
| 669 | |
| 670 | spin_lock_bh(&aq->lock); |
| 671 | if (!list_empty(&ap_msg->list)) { |
| 672 | list_for_each_entry(tmp, &aq->pendingq, list) |
| 673 | if (tmp->psmid == ap_msg->psmid) { |
| 674 | aq->pendingq_count--; |
| 675 | goto found; |
| 676 | } |
| 677 | aq->requestq_count--; |
| 678 | found: |
| 679 | list_del_init(&ap_msg->list); |
| 680 | } |
| 681 | spin_unlock_bh(&aq->lock); |
| 682 | } |
| 683 | EXPORT_SYMBOL(ap_cancel_message); |
| 684 | |
| 685 | /** |
| 686 | * __ap_flush_queue(): Flush requests. |
| 687 | * @aq: Pointer to the AP queue |
| 688 | * |
| 689 | * Flush all requests from the request/pending queue of an AP device. |
| 690 | */ |
| 691 | static void __ap_flush_queue(struct ap_queue *aq) |
| 692 | { |
| 693 | struct ap_message *ap_msg, *next; |
| 694 | |
| 695 | list_for_each_entry_safe(ap_msg, next, &aq->pendingq, list) { |
| 696 | list_del_init(&ap_msg->list); |
| 697 | aq->pendingq_count--; |
| 698 | ap_msg->rc = -EAGAIN; |
| 699 | ap_msg->receive(aq, ap_msg, NULL); |
| 700 | } |
| 701 | list_for_each_entry_safe(ap_msg, next, &aq->requestq, list) { |
| 702 | list_del_init(&ap_msg->list); |
| 703 | aq->requestq_count--; |
| 704 | ap_msg->rc = -EAGAIN; |
| 705 | ap_msg->receive(aq, ap_msg, NULL); |
| 706 | } |
| 707 | } |
| 708 | |
| 709 | void ap_flush_queue(struct ap_queue *aq) |
| 710 | { |
| 711 | spin_lock_bh(&aq->lock); |
| 712 | __ap_flush_queue(aq); |
| 713 | spin_unlock_bh(&aq->lock); |
| 714 | } |
| 715 | EXPORT_SYMBOL(ap_flush_queue); |
| 716 | |
| 717 | void ap_queue_remove(struct ap_queue *aq) |
| 718 | { |
| 719 | ap_flush_queue(aq); |
| 720 | del_timer_sync(&aq->timeout); |
| 721 | } |
| 722 | EXPORT_SYMBOL(ap_queue_remove); |