Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2015 Broadcom Corporation |
| 4 | */ |
| 5 | |
| 6 | #include <linux/kernel.h> |
| 7 | #include <linux/pci.h> |
| 8 | #include <linux/clk.h> |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/slab.h> |
| 11 | #include <linux/interrupt.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/of_address.h> |
| 14 | #include <linux/of_pci.h> |
| 15 | #include <linux/of_irq.h> |
| 16 | #include <linux/of_platform.h> |
| 17 | #include <linux/phy/phy.h> |
| 18 | |
| 19 | #include "../pci.h" |
| 20 | #include "pcie-iproc.h" |
| 21 | |
| 22 | static const struct of_device_id iproc_pcie_of_match_table[] = { |
| 23 | { |
| 24 | .compatible = "brcm,iproc-pcie", |
| 25 | .data = (int *)IPROC_PCIE_PAXB, |
| 26 | }, { |
| 27 | .compatible = "brcm,iproc-pcie-paxb-v2", |
| 28 | .data = (int *)IPROC_PCIE_PAXB_V2, |
| 29 | }, { |
| 30 | .compatible = "brcm,iproc-pcie-paxc", |
| 31 | .data = (int *)IPROC_PCIE_PAXC, |
| 32 | }, { |
| 33 | .compatible = "brcm,iproc-pcie-paxc-v2", |
| 34 | .data = (int *)IPROC_PCIE_PAXC_V2, |
| 35 | }, |
| 36 | { /* sentinel */ } |
| 37 | }; |
| 38 | MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table); |
| 39 | |
| 40 | static int iproc_pcie_pltfm_probe(struct platform_device *pdev) |
| 41 | { |
| 42 | struct device *dev = &pdev->dev; |
| 43 | struct iproc_pcie *pcie; |
| 44 | struct device_node *np = dev->of_node; |
| 45 | struct resource reg; |
| 46 | resource_size_t iobase = 0; |
| 47 | LIST_HEAD(resources); |
| 48 | struct pci_host_bridge *bridge; |
| 49 | int ret; |
| 50 | |
| 51 | bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); |
| 52 | if (!bridge) |
| 53 | return -ENOMEM; |
| 54 | |
| 55 | pcie = pci_host_bridge_priv(bridge); |
| 56 | |
| 57 | pcie->dev = dev; |
| 58 | pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev); |
| 59 | |
| 60 | ret = of_address_to_resource(np, 0, ®); |
| 61 | if (ret < 0) { |
| 62 | dev_err(dev, "unable to obtain controller resources\n"); |
| 63 | return ret; |
| 64 | } |
| 65 | |
| 66 | pcie->base = devm_pci_remap_cfgspace(dev, reg.start, |
| 67 | resource_size(®)); |
| 68 | if (!pcie->base) { |
| 69 | dev_err(dev, "unable to map controller registers\n"); |
| 70 | return -ENOMEM; |
| 71 | } |
| 72 | pcie->base_addr = reg.start; |
| 73 | |
| 74 | if (of_property_read_bool(np, "brcm,pcie-ob")) { |
| 75 | u32 val; |
| 76 | |
| 77 | ret = of_property_read_u32(np, "brcm,pcie-ob-axi-offset", |
| 78 | &val); |
| 79 | if (ret) { |
| 80 | dev_err(dev, |
| 81 | "missing brcm,pcie-ob-axi-offset property\n"); |
| 82 | return ret; |
| 83 | } |
| 84 | pcie->ob.axi_offset = val; |
| 85 | pcie->need_ob_cfg = true; |
| 86 | } |
| 87 | |
| 88 | /* |
| 89 | * DT nodes are not used by all platforms that use the iProc PCIe |
| 90 | * core driver. For platforms that require explict inbound mapping |
| 91 | * configuration, "dma-ranges" would have been present in DT |
| 92 | */ |
| 93 | pcie->need_ib_cfg = of_property_read_bool(np, "dma-ranges"); |
| 94 | |
| 95 | /* PHY use is optional */ |
| 96 | pcie->phy = devm_phy_get(dev, "pcie-phy"); |
| 97 | if (IS_ERR(pcie->phy)) { |
| 98 | if (PTR_ERR(pcie->phy) == -EPROBE_DEFER) |
| 99 | return -EPROBE_DEFER; |
| 100 | pcie->phy = NULL; |
| 101 | } |
| 102 | |
| 103 | ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &resources, |
| 104 | &iobase); |
| 105 | if (ret) { |
| 106 | dev_err(dev, "unable to get PCI host bridge resources\n"); |
| 107 | return ret; |
| 108 | } |
| 109 | |
| 110 | /* PAXC doesn't support legacy IRQs, skip mapping */ |
| 111 | switch (pcie->type) { |
| 112 | case IPROC_PCIE_PAXC: |
| 113 | case IPROC_PCIE_PAXC_V2: |
| 114 | break; |
| 115 | default: |
| 116 | pcie->map_irq = of_irq_parse_and_map_pci; |
| 117 | } |
| 118 | |
| 119 | ret = iproc_pcie_setup(pcie, &resources); |
| 120 | if (ret) { |
| 121 | dev_err(dev, "PCIe controller setup failed\n"); |
| 122 | pci_free_resource_list(&resources); |
| 123 | return ret; |
| 124 | } |
| 125 | |
| 126 | platform_set_drvdata(pdev, pcie); |
| 127 | return 0; |
| 128 | } |
| 129 | |
| 130 | static int iproc_pcie_pltfm_remove(struct platform_device *pdev) |
| 131 | { |
| 132 | struct iproc_pcie *pcie = platform_get_drvdata(pdev); |
| 133 | |
| 134 | return iproc_pcie_remove(pcie); |
| 135 | } |
| 136 | |
| 137 | static void iproc_pcie_pltfm_shutdown(struct platform_device *pdev) |
| 138 | { |
| 139 | struct iproc_pcie *pcie = platform_get_drvdata(pdev); |
| 140 | |
| 141 | iproc_pcie_shutdown(pcie); |
| 142 | } |
| 143 | |
| 144 | static struct platform_driver iproc_pcie_pltfm_driver = { |
| 145 | .driver = { |
| 146 | .name = "iproc-pcie", |
| 147 | .of_match_table = of_match_ptr(iproc_pcie_of_match_table), |
| 148 | }, |
| 149 | .probe = iproc_pcie_pltfm_probe, |
| 150 | .remove = iproc_pcie_pltfm_remove, |
| 151 | .shutdown = iproc_pcie_pltfm_shutdown, |
| 152 | }; |
| 153 | module_platform_driver(iproc_pcie_pltfm_driver); |
| 154 | |
| 155 | MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); |
| 156 | MODULE_DESCRIPTION("Broadcom iPROC PCIe platform driver"); |
| 157 | MODULE_LICENSE("GPL v2"); |