Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * xHCI host controller driver for HiSilicon STB SoCs |
| 4 | * |
| 5 | * Copyright (C) 2017-2018 HiSilicon Co., Ltd. http://www.hisilicon.com |
| 6 | * |
| 7 | * Authors: Jianguo Sun <sunjianguo1@huawei.com> |
| 8 | */ |
| 9 | |
| 10 | #include <linux/clk.h> |
| 11 | #include <linux/dma-mapping.h> |
| 12 | #include <linux/kernel.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/of.h> |
| 15 | #include <linux/platform_device.h> |
| 16 | #include <linux/pm_runtime.h> |
| 17 | #include <linux/reset.h> |
| 18 | |
| 19 | #include "xhci.h" |
| 20 | |
| 21 | #define GTXTHRCFG 0xc108 |
| 22 | #define GRXTHRCFG 0xc10c |
| 23 | #define REG_GUSB2PHYCFG0 0xc200 |
| 24 | #define BIT_UTMI_8_16 BIT(3) |
| 25 | #define BIT_UTMI_ULPI BIT(4) |
| 26 | #define BIT_FREECLK_EXIST BIT(30) |
| 27 | |
| 28 | #define REG_GUSB3PIPECTL0 0xc2c0 |
| 29 | #define USB3_DEEMPHASIS_MASK GENMASK(2, 1) |
| 30 | #define USB3_DEEMPHASIS0 BIT(1) |
| 31 | #define USB3_TX_MARGIN1 BIT(4) |
| 32 | |
| 33 | struct xhci_hcd_histb { |
| 34 | struct device *dev; |
| 35 | struct usb_hcd *hcd; |
| 36 | void __iomem *ctrl; |
| 37 | struct clk *bus_clk; |
| 38 | struct clk *utmi_clk; |
| 39 | struct clk *pipe_clk; |
| 40 | struct clk *suspend_clk; |
| 41 | struct reset_control *soft_reset; |
| 42 | }; |
| 43 | |
| 44 | static inline struct xhci_hcd_histb *hcd_to_histb(struct usb_hcd *hcd) |
| 45 | { |
| 46 | return dev_get_drvdata(hcd->self.controller); |
| 47 | } |
| 48 | |
| 49 | static int xhci_histb_config(struct xhci_hcd_histb *histb) |
| 50 | { |
| 51 | struct device_node *np = histb->dev->of_node; |
| 52 | u32 regval; |
| 53 | |
| 54 | if (of_property_match_string(np, "phys-names", "inno") >= 0) { |
| 55 | /* USB2 PHY chose ulpi 8bit interface */ |
| 56 | regval = readl(histb->ctrl + REG_GUSB2PHYCFG0); |
| 57 | regval &= ~BIT_UTMI_ULPI; |
| 58 | regval &= ~(BIT_UTMI_8_16); |
| 59 | regval &= ~BIT_FREECLK_EXIST; |
| 60 | writel(regval, histb->ctrl + REG_GUSB2PHYCFG0); |
| 61 | } |
| 62 | |
| 63 | if (of_property_match_string(np, "phys-names", "combo") >= 0) { |
| 64 | /* |
| 65 | * write 0x010c0012 to GUSB3PIPECTL0 |
| 66 | * GUSB3PIPECTL0[5:3] = 010 : Tx Margin = 900mV , |
| 67 | * decrease TX voltage |
| 68 | * GUSB3PIPECTL0[2:1] = 01 : Tx Deemphasis = -3.5dB, |
| 69 | * refer to xHCI spec |
| 70 | */ |
| 71 | regval = readl(histb->ctrl + REG_GUSB3PIPECTL0); |
| 72 | regval &= ~USB3_DEEMPHASIS_MASK; |
| 73 | regval |= USB3_DEEMPHASIS0; |
| 74 | regval |= USB3_TX_MARGIN1; |
| 75 | writel(regval, histb->ctrl + REG_GUSB3PIPECTL0); |
| 76 | } |
| 77 | |
| 78 | writel(0x23100000, histb->ctrl + GTXTHRCFG); |
| 79 | writel(0x23100000, histb->ctrl + GRXTHRCFG); |
| 80 | |
| 81 | return 0; |
| 82 | } |
| 83 | |
| 84 | static int xhci_histb_clks_get(struct xhci_hcd_histb *histb) |
| 85 | { |
| 86 | struct device *dev = histb->dev; |
| 87 | |
| 88 | histb->bus_clk = devm_clk_get(dev, "bus"); |
| 89 | if (IS_ERR(histb->bus_clk)) { |
| 90 | dev_err(dev, "fail to get bus clk\n"); |
| 91 | return PTR_ERR(histb->bus_clk); |
| 92 | } |
| 93 | |
| 94 | histb->utmi_clk = devm_clk_get(dev, "utmi"); |
| 95 | if (IS_ERR(histb->utmi_clk)) { |
| 96 | dev_err(dev, "fail to get utmi clk\n"); |
| 97 | return PTR_ERR(histb->utmi_clk); |
| 98 | } |
| 99 | |
| 100 | histb->pipe_clk = devm_clk_get(dev, "pipe"); |
| 101 | if (IS_ERR(histb->pipe_clk)) { |
| 102 | dev_err(dev, "fail to get pipe clk\n"); |
| 103 | return PTR_ERR(histb->pipe_clk); |
| 104 | } |
| 105 | |
| 106 | histb->suspend_clk = devm_clk_get(dev, "suspend"); |
| 107 | if (IS_ERR(histb->suspend_clk)) { |
| 108 | dev_err(dev, "fail to get suspend clk\n"); |
| 109 | return PTR_ERR(histb->suspend_clk); |
| 110 | } |
| 111 | |
| 112 | return 0; |
| 113 | } |
| 114 | |
| 115 | static int xhci_histb_host_enable(struct xhci_hcd_histb *histb) |
| 116 | { |
| 117 | int ret; |
| 118 | |
| 119 | ret = clk_prepare_enable(histb->bus_clk); |
| 120 | if (ret) { |
| 121 | dev_err(histb->dev, "failed to enable bus clk\n"); |
| 122 | return ret; |
| 123 | } |
| 124 | |
| 125 | ret = clk_prepare_enable(histb->utmi_clk); |
| 126 | if (ret) { |
| 127 | dev_err(histb->dev, "failed to enable utmi clk\n"); |
| 128 | goto err_utmi_clk; |
| 129 | } |
| 130 | |
| 131 | ret = clk_prepare_enable(histb->pipe_clk); |
| 132 | if (ret) { |
| 133 | dev_err(histb->dev, "failed to enable pipe clk\n"); |
| 134 | goto err_pipe_clk; |
| 135 | } |
| 136 | |
| 137 | ret = clk_prepare_enable(histb->suspend_clk); |
| 138 | if (ret) { |
| 139 | dev_err(histb->dev, "failed to enable suspend clk\n"); |
| 140 | goto err_suspend_clk; |
| 141 | } |
| 142 | |
| 143 | reset_control_deassert(histb->soft_reset); |
| 144 | |
| 145 | return 0; |
| 146 | |
| 147 | err_suspend_clk: |
| 148 | clk_disable_unprepare(histb->pipe_clk); |
| 149 | err_pipe_clk: |
| 150 | clk_disable_unprepare(histb->utmi_clk); |
| 151 | err_utmi_clk: |
| 152 | clk_disable_unprepare(histb->bus_clk); |
| 153 | |
| 154 | return ret; |
| 155 | } |
| 156 | |
| 157 | static void xhci_histb_host_disable(struct xhci_hcd_histb *histb) |
| 158 | { |
| 159 | reset_control_assert(histb->soft_reset); |
| 160 | |
| 161 | clk_disable_unprepare(histb->suspend_clk); |
| 162 | clk_disable_unprepare(histb->pipe_clk); |
| 163 | clk_disable_unprepare(histb->utmi_clk); |
| 164 | clk_disable_unprepare(histb->bus_clk); |
| 165 | } |
| 166 | |
| 167 | static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci) |
| 168 | { |
| 169 | /* |
| 170 | * As of now platform drivers don't provide MSI support so we ensure |
| 171 | * here that the generic code does not try to make a pci_dev from our |
| 172 | * dev struct in order to setup MSI |
| 173 | */ |
| 174 | xhci->quirks |= XHCI_PLAT; |
| 175 | } |
| 176 | |
| 177 | /* called during probe() after chip reset completes */ |
| 178 | static int xhci_histb_setup(struct usb_hcd *hcd) |
| 179 | { |
| 180 | struct xhci_hcd_histb *histb = hcd_to_histb(hcd); |
| 181 | int ret; |
| 182 | |
| 183 | if (usb_hcd_is_primary_hcd(hcd)) { |
| 184 | ret = xhci_histb_config(histb); |
| 185 | if (ret) |
| 186 | return ret; |
| 187 | } |
| 188 | |
| 189 | return xhci_gen_setup(hcd, xhci_histb_quirks); |
| 190 | } |
| 191 | |
| 192 | static const struct xhci_driver_overrides xhci_histb_overrides __initconst = { |
| 193 | .reset = xhci_histb_setup, |
| 194 | }; |
| 195 | |
| 196 | static struct hc_driver __read_mostly xhci_histb_hc_driver; |
| 197 | static int xhci_histb_probe(struct platform_device *pdev) |
| 198 | { |
| 199 | struct device *dev = &pdev->dev; |
| 200 | struct xhci_hcd_histb *histb; |
| 201 | const struct hc_driver *driver; |
| 202 | struct usb_hcd *hcd; |
| 203 | struct xhci_hcd *xhci; |
| 204 | struct resource *res; |
| 205 | int irq; |
| 206 | int ret = -ENODEV; |
| 207 | |
| 208 | if (usb_disabled()) |
| 209 | return -ENODEV; |
| 210 | |
| 211 | driver = &xhci_histb_hc_driver; |
| 212 | histb = devm_kzalloc(dev, sizeof(*histb), GFP_KERNEL); |
| 213 | if (!histb) |
| 214 | return -ENOMEM; |
| 215 | |
| 216 | histb->dev = dev; |
| 217 | |
| 218 | irq = platform_get_irq(pdev, 0); |
| 219 | if (irq < 0) |
| 220 | return irq; |
| 221 | |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 222 | histb->ctrl = devm_platform_get_and_ioremap_resource(pdev, 0, &res); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 223 | if (IS_ERR(histb->ctrl)) |
| 224 | return PTR_ERR(histb->ctrl); |
| 225 | |
| 226 | ret = xhci_histb_clks_get(histb); |
| 227 | if (ret) |
| 228 | return ret; |
| 229 | |
| 230 | histb->soft_reset = devm_reset_control_get(dev, "soft"); |
| 231 | if (IS_ERR(histb->soft_reset)) { |
| 232 | dev_err(dev, "failed to get soft reset\n"); |
| 233 | return PTR_ERR(histb->soft_reset); |
| 234 | } |
| 235 | |
| 236 | pm_runtime_enable(dev); |
| 237 | pm_runtime_get_sync(dev); |
| 238 | device_enable_async_suspend(dev); |
| 239 | |
| 240 | /* Initialize dma_mask and coherent_dma_mask to 32-bits */ |
| 241 | ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); |
| 242 | if (ret) |
Olivier Deprez | 0e64123 | 2021-09-23 10:07:05 +0200 | [diff] [blame] | 243 | goto disable_pm; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 244 | |
| 245 | hcd = usb_create_hcd(driver, dev, dev_name(dev)); |
| 246 | if (!hcd) { |
| 247 | ret = -ENOMEM; |
| 248 | goto disable_pm; |
| 249 | } |
| 250 | |
| 251 | hcd->regs = histb->ctrl; |
| 252 | hcd->rsrc_start = res->start; |
| 253 | hcd->rsrc_len = resource_size(res); |
| 254 | |
| 255 | histb->hcd = hcd; |
| 256 | dev_set_drvdata(hcd->self.controller, histb); |
| 257 | |
| 258 | ret = xhci_histb_host_enable(histb); |
| 259 | if (ret) |
| 260 | goto put_hcd; |
| 261 | |
| 262 | xhci = hcd_to_xhci(hcd); |
| 263 | |
| 264 | device_wakeup_enable(hcd->self.controller); |
| 265 | |
| 266 | xhci->main_hcd = hcd; |
| 267 | xhci->shared_hcd = usb_create_shared_hcd(driver, dev, dev_name(dev), |
| 268 | hcd); |
| 269 | if (!xhci->shared_hcd) { |
| 270 | ret = -ENOMEM; |
| 271 | goto disable_host; |
| 272 | } |
| 273 | |
| 274 | if (device_property_read_bool(dev, "usb2-lpm-disable")) |
| 275 | xhci->quirks |= XHCI_HW_LPM_DISABLE; |
| 276 | |
| 277 | if (device_property_read_bool(dev, "usb3-lpm-capable")) |
| 278 | xhci->quirks |= XHCI_LPM_SUPPORT; |
| 279 | |
| 280 | /* imod_interval is the interrupt moderation value in nanoseconds. */ |
| 281 | xhci->imod_interval = 40000; |
| 282 | device_property_read_u32(dev, "imod-interval-ns", |
| 283 | &xhci->imod_interval); |
| 284 | |
| 285 | ret = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| 286 | if (ret) |
| 287 | goto put_usb3_hcd; |
| 288 | |
| 289 | if (HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| 290 | xhci->shared_hcd->can_do_streams = 1; |
| 291 | |
| 292 | ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); |
| 293 | if (ret) |
| 294 | goto dealloc_usb2_hcd; |
| 295 | |
| 296 | device_enable_async_suspend(dev); |
| 297 | pm_runtime_put_noidle(dev); |
| 298 | |
| 299 | /* |
| 300 | * Prevent runtime pm from being on as default, users should enable |
| 301 | * runtime pm using power/control in sysfs. |
| 302 | */ |
| 303 | pm_runtime_forbid(dev); |
| 304 | |
| 305 | return 0; |
| 306 | |
| 307 | dealloc_usb2_hcd: |
| 308 | usb_remove_hcd(hcd); |
| 309 | put_usb3_hcd: |
| 310 | usb_put_hcd(xhci->shared_hcd); |
| 311 | disable_host: |
| 312 | xhci_histb_host_disable(histb); |
| 313 | put_hcd: |
| 314 | usb_put_hcd(hcd); |
| 315 | disable_pm: |
| 316 | pm_runtime_put_sync(dev); |
| 317 | pm_runtime_disable(dev); |
| 318 | |
| 319 | return ret; |
| 320 | } |
| 321 | |
| 322 | static int xhci_histb_remove(struct platform_device *dev) |
| 323 | { |
| 324 | struct xhci_hcd_histb *histb = platform_get_drvdata(dev); |
| 325 | struct usb_hcd *hcd = histb->hcd; |
| 326 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 327 | struct usb_hcd *shared_hcd = xhci->shared_hcd; |
| 328 | |
| 329 | xhci->xhc_state |= XHCI_STATE_REMOVING; |
| 330 | |
| 331 | usb_remove_hcd(shared_hcd); |
| 332 | xhci->shared_hcd = NULL; |
| 333 | device_wakeup_disable(&dev->dev); |
| 334 | |
| 335 | usb_remove_hcd(hcd); |
| 336 | usb_put_hcd(shared_hcd); |
| 337 | |
| 338 | xhci_histb_host_disable(histb); |
| 339 | usb_put_hcd(hcd); |
| 340 | pm_runtime_put_sync(&dev->dev); |
| 341 | pm_runtime_disable(&dev->dev); |
| 342 | |
| 343 | return 0; |
| 344 | } |
| 345 | |
| 346 | static int __maybe_unused xhci_histb_suspend(struct device *dev) |
| 347 | { |
| 348 | struct xhci_hcd_histb *histb = dev_get_drvdata(dev); |
| 349 | struct usb_hcd *hcd = histb->hcd; |
| 350 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 351 | int ret; |
| 352 | |
| 353 | ret = xhci_suspend(xhci, device_may_wakeup(dev)); |
| 354 | |
| 355 | if (!device_may_wakeup(dev)) |
| 356 | xhci_histb_host_disable(histb); |
| 357 | |
| 358 | return ret; |
| 359 | } |
| 360 | |
| 361 | static int __maybe_unused xhci_histb_resume(struct device *dev) |
| 362 | { |
| 363 | struct xhci_hcd_histb *histb = dev_get_drvdata(dev); |
| 364 | struct usb_hcd *hcd = histb->hcd; |
| 365 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 366 | |
| 367 | if (!device_may_wakeup(dev)) |
| 368 | xhci_histb_host_enable(histb); |
| 369 | |
| 370 | return xhci_resume(xhci, 0); |
| 371 | } |
| 372 | |
| 373 | static const struct dev_pm_ops xhci_histb_pm_ops = { |
| 374 | SET_SYSTEM_SLEEP_PM_OPS(xhci_histb_suspend, xhci_histb_resume) |
| 375 | }; |
| 376 | #define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_histb_pm_ops : NULL) |
| 377 | |
| 378 | #ifdef CONFIG_OF |
| 379 | static const struct of_device_id histb_xhci_of_match[] = { |
| 380 | { .compatible = "hisilicon,hi3798cv200-xhci"}, |
| 381 | { }, |
| 382 | }; |
| 383 | MODULE_DEVICE_TABLE(of, histb_xhci_of_match); |
| 384 | #endif |
| 385 | |
| 386 | static struct platform_driver histb_xhci_driver = { |
| 387 | .probe = xhci_histb_probe, |
| 388 | .remove = xhci_histb_remove, |
| 389 | .driver = { |
| 390 | .name = "xhci-histb", |
| 391 | .pm = DEV_PM_OPS, |
| 392 | .of_match_table = of_match_ptr(histb_xhci_of_match), |
| 393 | }, |
| 394 | }; |
| 395 | MODULE_ALIAS("platform:xhci-histb"); |
| 396 | |
| 397 | static int __init xhci_histb_init(void) |
| 398 | { |
| 399 | xhci_init_driver(&xhci_histb_hc_driver, &xhci_histb_overrides); |
| 400 | return platform_driver_register(&histb_xhci_driver); |
| 401 | } |
| 402 | module_init(xhci_histb_init); |
| 403 | |
| 404 | static void __exit xhci_histb_exit(void) |
| 405 | { |
| 406 | platform_driver_unregister(&histb_xhci_driver); |
| 407 | } |
| 408 | module_exit(xhci_histb_exit); |
| 409 | |
| 410 | MODULE_DESCRIPTION("HiSilicon STB xHCI Host Controller Driver"); |
| 411 | MODULE_LICENSE("GPL v2"); |