David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * SRF04: ultrasonic sensor for distance measuring by using GPIOs |
| 4 | * |
| 5 | * Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de> |
| 6 | * |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 7 | * For details about the device see: |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 8 | * https://www.robot-electronics.co.uk/htm/srf04tech.htm |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 9 | * |
| 10 | * the measurement cycle as timing diagram looks like: |
| 11 | * |
| 12 | * +---+ |
| 13 | * GPIO | | |
| 14 | * trig: --+ +------------------------------------------------------ |
| 15 | * ^ ^ |
| 16 | * |<->| |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 17 | * udelay(trigger_pulse_us) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 18 | * |
| 19 | * ultra +-+ +-+ +-+ |
| 20 | * sonic | | | | | | |
| 21 | * burst: ---------+ +-+ +-+ +----------------------------------------- |
| 22 | * . |
| 23 | * ultra . +-+ +-+ +-+ |
| 24 | * sonic . | | | | | | |
| 25 | * echo: ----------------------------------+ +-+ +-+ +---------------- |
| 26 | * . . |
| 27 | * +------------------------+ |
| 28 | * GPIO | | |
| 29 | * echo: -------------------+ +--------------- |
| 30 | * ^ ^ |
| 31 | * interrupt interrupt |
| 32 | * (ts_rising) (ts_falling) |
| 33 | * |<---------------------->| |
| 34 | * pulse time measured |
| 35 | * --> one round trip of ultra sonic waves |
| 36 | */ |
| 37 | #include <linux/err.h> |
| 38 | #include <linux/gpio/consumer.h> |
| 39 | #include <linux/kernel.h> |
| 40 | #include <linux/module.h> |
| 41 | #include <linux/of.h> |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 42 | #include <linux/of_device.h> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 43 | #include <linux/platform_device.h> |
| 44 | #include <linux/property.h> |
| 45 | #include <linux/sched.h> |
| 46 | #include <linux/interrupt.h> |
| 47 | #include <linux/delay.h> |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 48 | #include <linux/pm_runtime.h> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 49 | #include <linux/iio/iio.h> |
| 50 | #include <linux/iio/sysfs.h> |
| 51 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 52 | struct srf04_cfg { |
| 53 | unsigned long trigger_pulse_us; |
| 54 | }; |
| 55 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 56 | struct srf04_data { |
| 57 | struct device *dev; |
| 58 | struct gpio_desc *gpiod_trig; |
| 59 | struct gpio_desc *gpiod_echo; |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 60 | struct gpio_desc *gpiod_power; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 61 | struct mutex lock; |
| 62 | int irqnr; |
| 63 | ktime_t ts_rising; |
| 64 | ktime_t ts_falling; |
| 65 | struct completion rising; |
| 66 | struct completion falling; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 67 | const struct srf04_cfg *cfg; |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 68 | int startup_time_ms; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 69 | }; |
| 70 | |
| 71 | static const struct srf04_cfg srf04_cfg = { |
| 72 | .trigger_pulse_us = 10, |
| 73 | }; |
| 74 | |
| 75 | static const struct srf04_cfg mb_lv_cfg = { |
| 76 | .trigger_pulse_us = 20, |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 77 | }; |
| 78 | |
| 79 | static irqreturn_t srf04_handle_irq(int irq, void *dev_id) |
| 80 | { |
| 81 | struct iio_dev *indio_dev = dev_id; |
| 82 | struct srf04_data *data = iio_priv(indio_dev); |
| 83 | ktime_t now = ktime_get(); |
| 84 | |
| 85 | if (gpiod_get_value(data->gpiod_echo)) { |
| 86 | data->ts_rising = now; |
| 87 | complete(&data->rising); |
| 88 | } else { |
| 89 | data->ts_falling = now; |
| 90 | complete(&data->falling); |
| 91 | } |
| 92 | |
| 93 | return IRQ_HANDLED; |
| 94 | } |
| 95 | |
| 96 | static int srf04_read(struct srf04_data *data) |
| 97 | { |
| 98 | int ret; |
| 99 | ktime_t ktime_dt; |
| 100 | u64 dt_ns; |
| 101 | u32 time_ns, distance_mm; |
| 102 | |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 103 | if (data->gpiod_power) |
| 104 | pm_runtime_get_sync(data->dev); |
| 105 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 106 | /* |
| 107 | * just one read-echo-cycle can take place at a time |
| 108 | * ==> lock against concurrent reading calls |
| 109 | */ |
| 110 | mutex_lock(&data->lock); |
| 111 | |
| 112 | reinit_completion(&data->rising); |
| 113 | reinit_completion(&data->falling); |
| 114 | |
| 115 | gpiod_set_value(data->gpiod_trig, 1); |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 116 | udelay(data->cfg->trigger_pulse_us); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 117 | gpiod_set_value(data->gpiod_trig, 0); |
| 118 | |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 119 | if (data->gpiod_power) { |
| 120 | pm_runtime_mark_last_busy(data->dev); |
| 121 | pm_runtime_put_autosuspend(data->dev); |
| 122 | } |
| 123 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 124 | /* it should not take more than 20 ms until echo is rising */ |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 125 | ret = wait_for_completion_killable_timeout(&data->rising, HZ/50); |
| 126 | if (ret < 0) { |
| 127 | mutex_unlock(&data->lock); |
| 128 | return ret; |
| 129 | } else if (ret == 0) { |
| 130 | mutex_unlock(&data->lock); |
| 131 | return -ETIMEDOUT; |
| 132 | } |
| 133 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 134 | /* it cannot take more than 50 ms until echo is falling */ |
| 135 | ret = wait_for_completion_killable_timeout(&data->falling, HZ/20); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 136 | if (ret < 0) { |
| 137 | mutex_unlock(&data->lock); |
| 138 | return ret; |
| 139 | } else if (ret == 0) { |
| 140 | mutex_unlock(&data->lock); |
| 141 | return -ETIMEDOUT; |
| 142 | } |
| 143 | |
| 144 | ktime_dt = ktime_sub(data->ts_falling, data->ts_rising); |
| 145 | |
| 146 | mutex_unlock(&data->lock); |
| 147 | |
| 148 | dt_ns = ktime_to_ns(ktime_dt); |
| 149 | /* |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 150 | * measuring more than 6,45 meters is beyond the capabilities of |
| 151 | * the supported sensors |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 152 | * ==> filter out invalid results for not measuring echos of |
| 153 | * another us sensor |
| 154 | * |
| 155 | * formula: |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 156 | * distance 6,45 * 2 m |
| 157 | * time = ---------- = ------------ = 40438871 ns |
| 158 | * speed 319 m/s |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 159 | * |
| 160 | * using a minimum speed at -20 °C of 319 m/s |
| 161 | */ |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 162 | if (dt_ns > 40438871) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 163 | return -EIO; |
| 164 | |
| 165 | time_ns = dt_ns; |
| 166 | |
| 167 | /* |
| 168 | * the speed as function of the temperature is approximately: |
| 169 | * |
| 170 | * speed = 331,5 + 0,6 * Temp |
| 171 | * with Temp in °C |
| 172 | * and speed in m/s |
| 173 | * |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 174 | * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 175 | * temperature |
| 176 | * |
| 177 | * therefore: |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 178 | * time 343,5 time * 106 |
| 179 | * distance = ------ * ------- = ------------ |
| 180 | * 10^6 2 617176 |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 181 | * with time in ns |
| 182 | * and distance in mm (one way) |
| 183 | * |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 184 | * because we limit to 6,45 meters the multiplication with 106 just |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 185 | * fits into 32 bit |
| 186 | */ |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 187 | distance_mm = time_ns * 106 / 617176; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 188 | |
| 189 | return distance_mm; |
| 190 | } |
| 191 | |
| 192 | static int srf04_read_raw(struct iio_dev *indio_dev, |
| 193 | struct iio_chan_spec const *channel, int *val, |
| 194 | int *val2, long info) |
| 195 | { |
| 196 | struct srf04_data *data = iio_priv(indio_dev); |
| 197 | int ret; |
| 198 | |
| 199 | if (channel->type != IIO_DISTANCE) |
| 200 | return -EINVAL; |
| 201 | |
| 202 | switch (info) { |
| 203 | case IIO_CHAN_INFO_RAW: |
| 204 | ret = srf04_read(data); |
| 205 | if (ret < 0) |
| 206 | return ret; |
| 207 | *val = ret; |
| 208 | return IIO_VAL_INT; |
| 209 | case IIO_CHAN_INFO_SCALE: |
| 210 | /* |
| 211 | * theoretical maximum resolution is 3 mm |
| 212 | * 1 LSB is 1 mm |
| 213 | */ |
| 214 | *val = 0; |
| 215 | *val2 = 1000; |
| 216 | return IIO_VAL_INT_PLUS_MICRO; |
| 217 | default: |
| 218 | return -EINVAL; |
| 219 | } |
| 220 | } |
| 221 | |
| 222 | static const struct iio_info srf04_iio_info = { |
| 223 | .read_raw = srf04_read_raw, |
| 224 | }; |
| 225 | |
| 226 | static const struct iio_chan_spec srf04_chan_spec[] = { |
| 227 | { |
| 228 | .type = IIO_DISTANCE, |
| 229 | .info_mask_separate = |
| 230 | BIT(IIO_CHAN_INFO_RAW) | |
| 231 | BIT(IIO_CHAN_INFO_SCALE), |
| 232 | }, |
| 233 | }; |
| 234 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 235 | static const struct of_device_id of_srf04_match[] = { |
| 236 | { .compatible = "devantech,srf04", .data = &srf04_cfg}, |
| 237 | { .compatible = "maxbotix,mb1000", .data = &mb_lv_cfg}, |
| 238 | { .compatible = "maxbotix,mb1010", .data = &mb_lv_cfg}, |
| 239 | { .compatible = "maxbotix,mb1020", .data = &mb_lv_cfg}, |
| 240 | { .compatible = "maxbotix,mb1030", .data = &mb_lv_cfg}, |
| 241 | { .compatible = "maxbotix,mb1040", .data = &mb_lv_cfg}, |
| 242 | {}, |
| 243 | }; |
| 244 | |
| 245 | MODULE_DEVICE_TABLE(of, of_srf04_match); |
| 246 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 247 | static int srf04_probe(struct platform_device *pdev) |
| 248 | { |
| 249 | struct device *dev = &pdev->dev; |
| 250 | struct srf04_data *data; |
| 251 | struct iio_dev *indio_dev; |
| 252 | int ret; |
| 253 | |
| 254 | indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data)); |
| 255 | if (!indio_dev) { |
| 256 | dev_err(dev, "failed to allocate IIO device\n"); |
| 257 | return -ENOMEM; |
| 258 | } |
| 259 | |
| 260 | data = iio_priv(indio_dev); |
| 261 | data->dev = dev; |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 262 | data->cfg = of_match_device(of_srf04_match, dev)->data; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 263 | |
| 264 | mutex_init(&data->lock); |
| 265 | init_completion(&data->rising); |
| 266 | init_completion(&data->falling); |
| 267 | |
| 268 | data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW); |
| 269 | if (IS_ERR(data->gpiod_trig)) { |
| 270 | dev_err(dev, "failed to get trig-gpios: err=%ld\n", |
| 271 | PTR_ERR(data->gpiod_trig)); |
| 272 | return PTR_ERR(data->gpiod_trig); |
| 273 | } |
| 274 | |
| 275 | data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN); |
| 276 | if (IS_ERR(data->gpiod_echo)) { |
| 277 | dev_err(dev, "failed to get echo-gpios: err=%ld\n", |
| 278 | PTR_ERR(data->gpiod_echo)); |
| 279 | return PTR_ERR(data->gpiod_echo); |
| 280 | } |
| 281 | |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 282 | data->gpiod_power = devm_gpiod_get_optional(dev, "power", |
| 283 | GPIOD_OUT_LOW); |
| 284 | if (IS_ERR(data->gpiod_power)) { |
| 285 | dev_err(dev, "failed to get power-gpios: err=%ld\n", |
| 286 | PTR_ERR(data->gpiod_power)); |
| 287 | return PTR_ERR(data->gpiod_power); |
| 288 | } |
| 289 | if (data->gpiod_power) { |
| 290 | |
| 291 | if (of_property_read_u32(dev->of_node, "startup-time-ms", |
| 292 | &data->startup_time_ms)) |
| 293 | data->startup_time_ms = 100; |
| 294 | dev_dbg(dev, "using power gpio: startup-time-ms=%d\n", |
| 295 | data->startup_time_ms); |
| 296 | } |
| 297 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 298 | if (gpiod_cansleep(data->gpiod_echo)) { |
| 299 | dev_err(data->dev, "cansleep-GPIOs not supported\n"); |
| 300 | return -ENODEV; |
| 301 | } |
| 302 | |
| 303 | data->irqnr = gpiod_to_irq(data->gpiod_echo); |
| 304 | if (data->irqnr < 0) { |
| 305 | dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr); |
| 306 | return data->irqnr; |
| 307 | } |
| 308 | |
| 309 | ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq, |
| 310 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| 311 | pdev->name, indio_dev); |
| 312 | if (ret < 0) { |
| 313 | dev_err(data->dev, "request_irq: %d\n", ret); |
| 314 | return ret; |
| 315 | } |
| 316 | |
| 317 | platform_set_drvdata(pdev, indio_dev); |
| 318 | |
| 319 | indio_dev->name = "srf04"; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 320 | indio_dev->info = &srf04_iio_info; |
| 321 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 322 | indio_dev->channels = srf04_chan_spec; |
| 323 | indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec); |
| 324 | |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 325 | ret = iio_device_register(indio_dev); |
| 326 | if (ret < 0) { |
| 327 | dev_err(data->dev, "iio_device_register: %d\n", ret); |
| 328 | return ret; |
| 329 | } |
| 330 | |
| 331 | if (data->gpiod_power) { |
| 332 | pm_runtime_set_autosuspend_delay(data->dev, 1000); |
| 333 | pm_runtime_use_autosuspend(data->dev); |
| 334 | |
| 335 | ret = pm_runtime_set_active(data->dev); |
| 336 | if (ret) { |
| 337 | dev_err(data->dev, "pm_runtime_set_active: %d\n", ret); |
| 338 | iio_device_unregister(indio_dev); |
| 339 | } |
| 340 | |
| 341 | pm_runtime_enable(data->dev); |
| 342 | pm_runtime_idle(data->dev); |
| 343 | } |
| 344 | |
| 345 | return ret; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 346 | } |
| 347 | |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 348 | static int srf04_remove(struct platform_device *pdev) |
| 349 | { |
| 350 | struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| 351 | struct srf04_data *data = iio_priv(indio_dev); |
| 352 | |
| 353 | iio_device_unregister(indio_dev); |
| 354 | |
| 355 | if (data->gpiod_power) { |
| 356 | pm_runtime_disable(data->dev); |
| 357 | pm_runtime_set_suspended(data->dev); |
| 358 | } |
| 359 | |
| 360 | return 0; |
| 361 | } |
| 362 | |
| 363 | static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev) |
| 364 | { |
| 365 | struct platform_device *pdev = container_of(dev, |
| 366 | struct platform_device, dev); |
| 367 | struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| 368 | struct srf04_data *data = iio_priv(indio_dev); |
| 369 | |
| 370 | gpiod_set_value(data->gpiod_power, 0); |
| 371 | |
| 372 | return 0; |
| 373 | } |
| 374 | |
| 375 | static int __maybe_unused srf04_pm_runtime_resume(struct device *dev) |
| 376 | { |
| 377 | struct platform_device *pdev = container_of(dev, |
| 378 | struct platform_device, dev); |
| 379 | struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| 380 | struct srf04_data *data = iio_priv(indio_dev); |
| 381 | |
| 382 | gpiod_set_value(data->gpiod_power, 1); |
| 383 | msleep(data->startup_time_ms); |
| 384 | |
| 385 | return 0; |
| 386 | } |
| 387 | |
| 388 | static const struct dev_pm_ops srf04_pm_ops = { |
| 389 | SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend, |
| 390 | srf04_pm_runtime_resume, NULL) |
| 391 | }; |
| 392 | |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 393 | static struct platform_driver srf04_driver = { |
| 394 | .probe = srf04_probe, |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 395 | .remove = srf04_remove, |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 396 | .driver = { |
| 397 | .name = "srf04-gpio", |
| 398 | .of_match_table = of_srf04_match, |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 399 | .pm = &srf04_pm_ops, |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 400 | }, |
| 401 | }; |
| 402 | |
| 403 | module_platform_driver(srf04_driver); |
| 404 | |
| 405 | MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>"); |
| 406 | MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs"); |
| 407 | MODULE_LICENSE("GPL"); |
| 408 | MODULE_ALIAS("platform:srf04"); |