Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * DRM driver for Ilitek ILI9486 panels |
| 4 | * |
| 5 | * Copyright 2020 Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> |
| 6 | */ |
| 7 | |
| 8 | #include <linux/backlight.h> |
| 9 | #include <linux/delay.h> |
| 10 | #include <linux/gpio/consumer.h> |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/property.h> |
| 13 | #include <linux/spi/spi.h> |
| 14 | |
| 15 | #include <video/mipi_display.h> |
| 16 | |
| 17 | #include <drm/drm_atomic_helper.h> |
| 18 | #include <drm/drm_drv.h> |
| 19 | #include <drm/drm_fb_helper.h> |
| 20 | #include <drm/drm_gem_cma_helper.h> |
| 21 | #include <drm/drm_gem_framebuffer_helper.h> |
| 22 | #include <drm/drm_managed.h> |
| 23 | #include <drm/drm_mipi_dbi.h> |
| 24 | #include <drm/drm_modeset_helper.h> |
| 25 | |
| 26 | #define ILI9486_ITFCTR1 0xb0 |
| 27 | #define ILI9486_PWCTRL1 0xc2 |
| 28 | #define ILI9486_VMCTRL1 0xc5 |
| 29 | #define ILI9486_PGAMCTRL 0xe0 |
| 30 | #define ILI9486_NGAMCTRL 0xe1 |
| 31 | #define ILI9486_DGAMCTRL 0xe2 |
| 32 | #define ILI9486_MADCTL_BGR BIT(3) |
| 33 | #define ILI9486_MADCTL_MV BIT(5) |
| 34 | #define ILI9486_MADCTL_MX BIT(6) |
| 35 | #define ILI9486_MADCTL_MY BIT(7) |
| 36 | |
| 37 | /* |
| 38 | * The PiScreen/waveshare rpi-lcd-35 has a SPI to 16-bit parallel bus converter |
| 39 | * in front of the display controller. This means that 8-bit values have to be |
| 40 | * transferred as 16-bit. |
| 41 | */ |
| 42 | static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par, |
| 43 | size_t num) |
| 44 | { |
| 45 | struct spi_device *spi = mipi->spi; |
| 46 | void *data = par; |
| 47 | u32 speed_hz; |
| 48 | int i, ret; |
| 49 | __be16 *buf; |
| 50 | |
| 51 | buf = kmalloc(32 * sizeof(u16), GFP_KERNEL); |
| 52 | if (!buf) |
| 53 | return -ENOMEM; |
| 54 | |
| 55 | /* |
| 56 | * The displays are Raspberry Pi HATs and connected to the 8-bit only |
| 57 | * SPI controller, so 16-bit command and parameters need byte swapping |
| 58 | * before being transferred as 8-bit on the big endian SPI bus. |
| 59 | * Pixel data bytes have already been swapped before this function is |
| 60 | * called. |
| 61 | */ |
| 62 | buf[0] = cpu_to_be16(*cmd); |
| 63 | gpiod_set_value_cansleep(mipi->dc, 0); |
| 64 | speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 2); |
| 65 | ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, buf, 2); |
| 66 | if (ret || !num) |
| 67 | goto free; |
| 68 | |
| 69 | /* 8-bit configuration data, not 16-bit pixel data */ |
| 70 | if (num <= 32) { |
| 71 | for (i = 0; i < num; i++) |
| 72 | buf[i] = cpu_to_be16(par[i]); |
| 73 | num *= 2; |
| 74 | speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num); |
| 75 | data = buf; |
| 76 | } |
| 77 | |
| 78 | gpiod_set_value_cansleep(mipi->dc, 1); |
| 79 | ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num); |
| 80 | free: |
| 81 | kfree(buf); |
| 82 | |
| 83 | return ret; |
| 84 | } |
| 85 | |
| 86 | static void waveshare_enable(struct drm_simple_display_pipe *pipe, |
| 87 | struct drm_crtc_state *crtc_state, |
| 88 | struct drm_plane_state *plane_state) |
| 89 | { |
| 90 | struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); |
| 91 | struct mipi_dbi *dbi = &dbidev->dbi; |
| 92 | u8 addr_mode; |
| 93 | int ret, idx; |
| 94 | |
| 95 | if (!drm_dev_enter(pipe->crtc.dev, &idx)) |
| 96 | return; |
| 97 | |
| 98 | DRM_DEBUG_KMS("\n"); |
| 99 | |
| 100 | ret = mipi_dbi_poweron_conditional_reset(dbidev); |
| 101 | if (ret < 0) |
| 102 | goto out_exit; |
| 103 | if (ret == 1) |
| 104 | goto out_enable; |
| 105 | |
| 106 | mipi_dbi_command(dbi, ILI9486_ITFCTR1); |
| 107 | mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); |
| 108 | msleep(250); |
| 109 | |
| 110 | mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); |
| 111 | |
| 112 | mipi_dbi_command(dbi, ILI9486_PWCTRL1, 0x44); |
| 113 | |
| 114 | mipi_dbi_command(dbi, ILI9486_VMCTRL1, 0x00, 0x00, 0x00, 0x00); |
| 115 | |
| 116 | mipi_dbi_command(dbi, ILI9486_PGAMCTRL, |
| 117 | 0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98, |
| 118 | 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x0); |
| 119 | mipi_dbi_command(dbi, ILI9486_NGAMCTRL, |
| 120 | 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, |
| 121 | 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00); |
| 122 | mipi_dbi_command(dbi, ILI9486_DGAMCTRL, |
| 123 | 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, |
| 124 | 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00); |
| 125 | |
| 126 | mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); |
| 127 | msleep(100); |
| 128 | |
| 129 | out_enable: |
| 130 | switch (dbidev->rotation) { |
| 131 | case 90: |
| 132 | addr_mode = ILI9486_MADCTL_MY; |
| 133 | break; |
| 134 | case 180: |
| 135 | addr_mode = ILI9486_MADCTL_MV; |
| 136 | break; |
| 137 | case 270: |
| 138 | addr_mode = ILI9486_MADCTL_MX; |
| 139 | break; |
| 140 | default: |
| 141 | addr_mode = ILI9486_MADCTL_MV | ILI9486_MADCTL_MY | |
| 142 | ILI9486_MADCTL_MX; |
| 143 | break; |
| 144 | } |
| 145 | addr_mode |= ILI9486_MADCTL_BGR; |
| 146 | mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); |
| 147 | mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); |
| 148 | out_exit: |
| 149 | drm_dev_exit(idx); |
| 150 | } |
| 151 | |
| 152 | static const struct drm_simple_display_pipe_funcs waveshare_pipe_funcs = { |
| 153 | .enable = waveshare_enable, |
| 154 | .disable = mipi_dbi_pipe_disable, |
| 155 | .update = mipi_dbi_pipe_update, |
| 156 | .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, |
| 157 | }; |
| 158 | |
| 159 | static const struct drm_display_mode waveshare_mode = { |
| 160 | DRM_SIMPLE_MODE(480, 320, 73, 49), |
| 161 | }; |
| 162 | |
| 163 | DEFINE_DRM_GEM_CMA_FOPS(ili9486_fops); |
| 164 | |
| 165 | static struct drm_driver ili9486_driver = { |
| 166 | .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, |
| 167 | .fops = &ili9486_fops, |
| 168 | DRM_GEM_CMA_DRIVER_OPS_VMAP, |
| 169 | .debugfs_init = mipi_dbi_debugfs_init, |
| 170 | .name = "ili9486", |
| 171 | .desc = "Ilitek ILI9486", |
| 172 | .date = "20200118", |
| 173 | .major = 1, |
| 174 | .minor = 0, |
| 175 | }; |
| 176 | |
| 177 | static const struct of_device_id ili9486_of_match[] = { |
| 178 | { .compatible = "waveshare,rpi-lcd-35" }, |
| 179 | { .compatible = "ozzmaker,piscreen" }, |
| 180 | {}, |
| 181 | }; |
| 182 | MODULE_DEVICE_TABLE(of, ili9486_of_match); |
| 183 | |
| 184 | static const struct spi_device_id ili9486_id[] = { |
| 185 | { "ili9486", 0 }, |
| 186 | { } |
| 187 | }; |
| 188 | MODULE_DEVICE_TABLE(spi, ili9486_id); |
| 189 | |
| 190 | static int ili9486_probe(struct spi_device *spi) |
| 191 | { |
| 192 | struct device *dev = &spi->dev; |
| 193 | struct mipi_dbi_dev *dbidev; |
| 194 | struct drm_device *drm; |
| 195 | struct mipi_dbi *dbi; |
| 196 | struct gpio_desc *dc; |
| 197 | u32 rotation = 0; |
| 198 | int ret; |
| 199 | |
| 200 | dbidev = devm_drm_dev_alloc(dev, &ili9486_driver, |
| 201 | struct mipi_dbi_dev, drm); |
| 202 | if (IS_ERR(dbidev)) |
| 203 | return PTR_ERR(dbidev); |
| 204 | |
| 205 | dbi = &dbidev->dbi; |
| 206 | drm = &dbidev->drm; |
| 207 | |
| 208 | dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| 209 | if (IS_ERR(dbi->reset)) { |
| 210 | DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); |
| 211 | return PTR_ERR(dbi->reset); |
| 212 | } |
| 213 | |
| 214 | dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW); |
| 215 | if (IS_ERR(dc)) { |
| 216 | DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n"); |
| 217 | return PTR_ERR(dc); |
| 218 | } |
| 219 | |
| 220 | dbidev->backlight = devm_of_find_backlight(dev); |
| 221 | if (IS_ERR(dbidev->backlight)) |
| 222 | return PTR_ERR(dbidev->backlight); |
| 223 | |
| 224 | device_property_read_u32(dev, "rotation", &rotation); |
| 225 | |
| 226 | ret = mipi_dbi_spi_init(spi, dbi, dc); |
| 227 | if (ret) |
| 228 | return ret; |
| 229 | |
| 230 | dbi->command = waveshare_command; |
| 231 | dbi->read_commands = NULL; |
| 232 | |
| 233 | ret = mipi_dbi_dev_init(dbidev, &waveshare_pipe_funcs, |
| 234 | &waveshare_mode, rotation); |
| 235 | if (ret) |
| 236 | return ret; |
| 237 | |
| 238 | drm_mode_config_reset(drm); |
| 239 | |
| 240 | ret = drm_dev_register(drm, 0); |
| 241 | if (ret) |
| 242 | return ret; |
| 243 | |
| 244 | spi_set_drvdata(spi, drm); |
| 245 | |
| 246 | drm_fbdev_generic_setup(drm, 0); |
| 247 | |
| 248 | return 0; |
| 249 | } |
| 250 | |
| 251 | static int ili9486_remove(struct spi_device *spi) |
| 252 | { |
| 253 | struct drm_device *drm = spi_get_drvdata(spi); |
| 254 | |
| 255 | drm_dev_unplug(drm); |
| 256 | drm_atomic_helper_shutdown(drm); |
| 257 | |
| 258 | return 0; |
| 259 | } |
| 260 | |
| 261 | static void ili9486_shutdown(struct spi_device *spi) |
| 262 | { |
| 263 | drm_atomic_helper_shutdown(spi_get_drvdata(spi)); |
| 264 | } |
| 265 | |
| 266 | static struct spi_driver ili9486_spi_driver = { |
| 267 | .driver = { |
| 268 | .name = "ili9486", |
| 269 | .of_match_table = ili9486_of_match, |
| 270 | }, |
| 271 | .id_table = ili9486_id, |
| 272 | .probe = ili9486_probe, |
| 273 | .remove = ili9486_remove, |
| 274 | .shutdown = ili9486_shutdown, |
| 275 | }; |
| 276 | module_spi_driver(ili9486_spi_driver); |
| 277 | |
| 278 | MODULE_DESCRIPTION("Ilitek ILI9486 DRM driver"); |
| 279 | MODULE_AUTHOR("Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>"); |
| 280 | MODULE_LICENSE("GPL"); |