David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * SYSCON GPIO driver |
| 4 | * |
| 5 | * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <linux/err.h> |
| 9 | #include <linux/gpio/driver.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/of.h> |
| 12 | #include <linux/of_device.h> |
| 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/regmap.h> |
| 15 | #include <linux/mfd/syscon.h> |
| 16 | |
| 17 | #define GPIO_SYSCON_FEAT_IN BIT(0) |
| 18 | #define GPIO_SYSCON_FEAT_OUT BIT(1) |
| 19 | #define GPIO_SYSCON_FEAT_DIR BIT(2) |
| 20 | |
| 21 | /* SYSCON driver is designed to use 32-bit wide registers */ |
| 22 | #define SYSCON_REG_SIZE (4) |
| 23 | #define SYSCON_REG_BITS (SYSCON_REG_SIZE * 8) |
| 24 | |
| 25 | /** |
| 26 | * struct syscon_gpio_data - Configuration for the device. |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 27 | * @compatible: SYSCON driver compatible string. |
| 28 | * @flags: Set of GPIO_SYSCON_FEAT_ flags: |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 29 | * GPIO_SYSCON_FEAT_IN: GPIOs supports input, |
| 30 | * GPIO_SYSCON_FEAT_OUT: GPIOs supports output, |
| 31 | * GPIO_SYSCON_FEAT_DIR: GPIOs supports switch direction. |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 32 | * @bit_count: Number of bits used as GPIOs. |
| 33 | * @dat_bit_offset: Offset (in bits) to the first GPIO bit. |
| 34 | * @dir_bit_offset: Optional offset (in bits) to the first bit to switch |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 35 | * GPIO direction (Used with GPIO_SYSCON_FEAT_DIR flag). |
Olivier Deprez | 157378f | 2022-04-04 15:47:50 +0200 | [diff] [blame^] | 36 | * @set: HW specific callback to assigns output value |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 37 | * for signal "offset" |
| 38 | */ |
| 39 | |
| 40 | struct syscon_gpio_data { |
| 41 | const char *compatible; |
| 42 | unsigned int flags; |
| 43 | unsigned int bit_count; |
| 44 | unsigned int dat_bit_offset; |
| 45 | unsigned int dir_bit_offset; |
| 46 | void (*set)(struct gpio_chip *chip, |
| 47 | unsigned offset, int value); |
| 48 | }; |
| 49 | |
| 50 | struct syscon_gpio_priv { |
| 51 | struct gpio_chip chip; |
| 52 | struct regmap *syscon; |
| 53 | const struct syscon_gpio_data *data; |
| 54 | u32 dreg_offset; |
| 55 | u32 dir_reg_offset; |
| 56 | }; |
| 57 | |
| 58 | static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset) |
| 59 | { |
| 60 | struct syscon_gpio_priv *priv = gpiochip_get_data(chip); |
| 61 | unsigned int val, offs; |
| 62 | int ret; |
| 63 | |
| 64 | offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; |
| 65 | |
| 66 | ret = regmap_read(priv->syscon, |
| 67 | (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val); |
| 68 | if (ret) |
| 69 | return ret; |
| 70 | |
| 71 | return !!(val & BIT(offs % SYSCON_REG_BITS)); |
| 72 | } |
| 73 | |
| 74 | static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| 75 | { |
| 76 | struct syscon_gpio_priv *priv = gpiochip_get_data(chip); |
| 77 | unsigned int offs; |
| 78 | |
| 79 | offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; |
| 80 | |
| 81 | regmap_update_bits(priv->syscon, |
| 82 | (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, |
| 83 | BIT(offs % SYSCON_REG_BITS), |
| 84 | val ? BIT(offs % SYSCON_REG_BITS) : 0); |
| 85 | } |
| 86 | |
| 87 | static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset) |
| 88 | { |
| 89 | struct syscon_gpio_priv *priv = gpiochip_get_data(chip); |
| 90 | |
| 91 | if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) { |
| 92 | unsigned int offs; |
| 93 | |
| 94 | offs = priv->dir_reg_offset + |
| 95 | priv->data->dir_bit_offset + offset; |
| 96 | |
| 97 | regmap_update_bits(priv->syscon, |
| 98 | (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, |
| 99 | BIT(offs % SYSCON_REG_BITS), 0); |
| 100 | } |
| 101 | |
| 102 | return 0; |
| 103 | } |
| 104 | |
| 105 | static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val) |
| 106 | { |
| 107 | struct syscon_gpio_priv *priv = gpiochip_get_data(chip); |
| 108 | |
| 109 | if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) { |
| 110 | unsigned int offs; |
| 111 | |
| 112 | offs = priv->dir_reg_offset + |
| 113 | priv->data->dir_bit_offset + offset; |
| 114 | |
| 115 | regmap_update_bits(priv->syscon, |
| 116 | (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, |
| 117 | BIT(offs % SYSCON_REG_BITS), |
| 118 | BIT(offs % SYSCON_REG_BITS)); |
| 119 | } |
| 120 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame] | 121 | chip->set(chip, offset, val); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 122 | |
| 123 | return 0; |
| 124 | } |
| 125 | |
| 126 | static const struct syscon_gpio_data clps711x_mctrl_gpio = { |
| 127 | /* ARM CLPS711X SYSFLG1 Bits 8-10 */ |
| 128 | .compatible = "cirrus,ep7209-syscon1", |
| 129 | .flags = GPIO_SYSCON_FEAT_IN, |
| 130 | .bit_count = 3, |
| 131 | .dat_bit_offset = 0x40 * 8 + 8, |
| 132 | }; |
| 133 | |
| 134 | static void rockchip_gpio_set(struct gpio_chip *chip, unsigned int offset, |
| 135 | int val) |
| 136 | { |
| 137 | struct syscon_gpio_priv *priv = gpiochip_get_data(chip); |
| 138 | unsigned int offs; |
| 139 | u8 bit; |
| 140 | u32 data; |
| 141 | int ret; |
| 142 | |
| 143 | offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; |
| 144 | bit = offs % SYSCON_REG_BITS; |
| 145 | data = (val ? BIT(bit) : 0) | BIT(bit + 16); |
| 146 | ret = regmap_write(priv->syscon, |
| 147 | (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, |
| 148 | data); |
| 149 | if (ret < 0) |
| 150 | dev_err(chip->parent, "gpio write failed ret(%d)\n", ret); |
| 151 | } |
| 152 | |
| 153 | static const struct syscon_gpio_data rockchip_rk3328_gpio_mute = { |
| 154 | /* RK3328 GPIO_MUTE is an output only pin at GRF_SOC_CON10[1] */ |
| 155 | .flags = GPIO_SYSCON_FEAT_OUT, |
| 156 | .bit_count = 1, |
| 157 | .dat_bit_offset = 0x0428 * 8 + 1, |
| 158 | .set = rockchip_gpio_set, |
| 159 | }; |
| 160 | |
| 161 | #define KEYSTONE_LOCK_BIT BIT(0) |
| 162 | |
| 163 | static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| 164 | { |
| 165 | struct syscon_gpio_priv *priv = gpiochip_get_data(chip); |
| 166 | unsigned int offs; |
| 167 | int ret; |
| 168 | |
| 169 | offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; |
| 170 | |
| 171 | if (!val) |
| 172 | return; |
| 173 | |
| 174 | ret = regmap_update_bits( |
| 175 | priv->syscon, |
| 176 | (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, |
| 177 | BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT, |
| 178 | BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT); |
| 179 | if (ret < 0) |
| 180 | dev_err(chip->parent, "gpio write failed ret(%d)\n", ret); |
| 181 | } |
| 182 | |
| 183 | static const struct syscon_gpio_data keystone_dsp_gpio = { |
| 184 | /* ARM Keystone 2 */ |
| 185 | .compatible = NULL, |
| 186 | .flags = GPIO_SYSCON_FEAT_OUT, |
| 187 | .bit_count = 28, |
| 188 | .dat_bit_offset = 4, |
| 189 | .set = keystone_gpio_set, |
| 190 | }; |
| 191 | |
| 192 | static const struct of_device_id syscon_gpio_ids[] = { |
| 193 | { |
| 194 | .compatible = "cirrus,ep7209-mctrl-gpio", |
| 195 | .data = &clps711x_mctrl_gpio, |
| 196 | }, |
| 197 | { |
| 198 | .compatible = "ti,keystone-dsp-gpio", |
| 199 | .data = &keystone_dsp_gpio, |
| 200 | }, |
| 201 | { |
| 202 | .compatible = "rockchip,rk3328-grf-gpio", |
| 203 | .data = &rockchip_rk3328_gpio_mute, |
| 204 | }, |
| 205 | { } |
| 206 | }; |
| 207 | MODULE_DEVICE_TABLE(of, syscon_gpio_ids); |
| 208 | |
| 209 | static int syscon_gpio_probe(struct platform_device *pdev) |
| 210 | { |
| 211 | struct device *dev = &pdev->dev; |
| 212 | struct syscon_gpio_priv *priv; |
| 213 | struct device_node *np = dev->of_node; |
| 214 | int ret; |
| 215 | |
| 216 | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| 217 | if (!priv) |
| 218 | return -ENOMEM; |
| 219 | |
| 220 | priv->data = of_device_get_match_data(dev); |
| 221 | |
| 222 | if (priv->data->compatible) { |
| 223 | priv->syscon = syscon_regmap_lookup_by_compatible( |
| 224 | priv->data->compatible); |
| 225 | if (IS_ERR(priv->syscon)) |
| 226 | return PTR_ERR(priv->syscon); |
| 227 | } else { |
| 228 | priv->syscon = |
| 229 | syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev"); |
| 230 | if (IS_ERR(priv->syscon) && np->parent) |
| 231 | priv->syscon = syscon_node_to_regmap(np->parent); |
| 232 | if (IS_ERR(priv->syscon)) |
| 233 | return PTR_ERR(priv->syscon); |
| 234 | |
| 235 | ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1, |
| 236 | &priv->dreg_offset); |
| 237 | if (ret) |
| 238 | dev_err(dev, "can't read the data register offset!\n"); |
| 239 | |
| 240 | priv->dreg_offset <<= 3; |
| 241 | |
| 242 | ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2, |
| 243 | &priv->dir_reg_offset); |
| 244 | if (ret) |
| 245 | dev_dbg(dev, "can't read the dir register offset!\n"); |
| 246 | |
| 247 | priv->dir_reg_offset <<= 3; |
| 248 | } |
| 249 | |
| 250 | priv->chip.parent = dev; |
| 251 | priv->chip.owner = THIS_MODULE; |
| 252 | priv->chip.label = dev_name(dev); |
| 253 | priv->chip.base = -1; |
| 254 | priv->chip.ngpio = priv->data->bit_count; |
| 255 | priv->chip.get = syscon_gpio_get; |
| 256 | if (priv->data->flags & GPIO_SYSCON_FEAT_IN) |
| 257 | priv->chip.direction_input = syscon_gpio_dir_in; |
| 258 | if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) { |
| 259 | priv->chip.set = priv->data->set ? : syscon_gpio_set; |
| 260 | priv->chip.direction_output = syscon_gpio_dir_out; |
| 261 | } |
| 262 | |
| 263 | platform_set_drvdata(pdev, priv); |
| 264 | |
| 265 | return devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv); |
| 266 | } |
| 267 | |
| 268 | static struct platform_driver syscon_gpio_driver = { |
| 269 | .driver = { |
| 270 | .name = "gpio-syscon", |
| 271 | .of_match_table = syscon_gpio_ids, |
| 272 | }, |
| 273 | .probe = syscon_gpio_probe, |
| 274 | }; |
| 275 | module_platform_driver(syscon_gpio_driver); |
| 276 | |
| 277 | MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); |
| 278 | MODULE_DESCRIPTION("SYSCON GPIO driver"); |
| 279 | MODULE_LICENSE("GPL"); |