David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> |
| 4 | * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | #include <linux/init.h> |
| 8 | #include <linux/types.h> |
| 9 | #include <linux/delay.h> |
| 10 | #include <linux/dma-mapping.h> |
| 11 | #include <linux/platform_device.h> |
| 12 | #include <linux/mtd/physmap.h> |
| 13 | #include <linux/serial.h> |
| 14 | #include <linux/serial_8250.h> |
| 15 | #include <linux/ioport.h> |
| 16 | #include <linux/io.h> |
| 17 | #include <linux/vlynq.h> |
| 18 | #include <linux/leds.h> |
| 19 | #include <linux/string.h> |
| 20 | #include <linux/etherdevice.h> |
| 21 | #include <linux/phy.h> |
| 22 | #include <linux/phy_fixed.h> |
| 23 | #include <linux/gpio.h> |
| 24 | #include <linux/clk.h> |
| 25 | |
| 26 | #include <asm/addrspace.h> |
| 27 | #include <asm/mach-ar7/ar7.h> |
| 28 | #include <asm/mach-ar7/prom.h> |
| 29 | |
| 30 | /***************************************************************************** |
| 31 | * VLYNQ Bus |
| 32 | ****************************************************************************/ |
| 33 | struct plat_vlynq_data { |
| 34 | struct plat_vlynq_ops ops; |
| 35 | int gpio_bit; |
| 36 | int reset_bit; |
| 37 | }; |
| 38 | |
| 39 | static int vlynq_on(struct vlynq_device *dev) |
| 40 | { |
| 41 | int ret; |
| 42 | struct plat_vlynq_data *pdata = dev->dev.platform_data; |
| 43 | |
| 44 | ret = gpio_request(pdata->gpio_bit, "vlynq"); |
| 45 | if (ret) |
| 46 | goto out; |
| 47 | |
| 48 | ar7_device_reset(pdata->reset_bit); |
| 49 | |
| 50 | ret = ar7_gpio_disable(pdata->gpio_bit); |
| 51 | if (ret) |
| 52 | goto out_enabled; |
| 53 | |
| 54 | ret = ar7_gpio_enable(pdata->gpio_bit); |
| 55 | if (ret) |
| 56 | goto out_enabled; |
| 57 | |
| 58 | ret = gpio_direction_output(pdata->gpio_bit, 0); |
| 59 | if (ret) |
| 60 | goto out_gpio_enabled; |
| 61 | |
| 62 | msleep(50); |
| 63 | |
| 64 | gpio_set_value(pdata->gpio_bit, 1); |
| 65 | |
| 66 | msleep(50); |
| 67 | |
| 68 | return 0; |
| 69 | |
| 70 | out_gpio_enabled: |
| 71 | ar7_gpio_disable(pdata->gpio_bit); |
| 72 | out_enabled: |
| 73 | ar7_device_disable(pdata->reset_bit); |
| 74 | gpio_free(pdata->gpio_bit); |
| 75 | out: |
| 76 | return ret; |
| 77 | } |
| 78 | |
| 79 | static void vlynq_off(struct vlynq_device *dev) |
| 80 | { |
| 81 | struct plat_vlynq_data *pdata = dev->dev.platform_data; |
| 82 | |
| 83 | ar7_gpio_disable(pdata->gpio_bit); |
| 84 | gpio_free(pdata->gpio_bit); |
| 85 | ar7_device_disable(pdata->reset_bit); |
| 86 | } |
| 87 | |
| 88 | static struct resource vlynq_low_res[] = { |
| 89 | { |
| 90 | .name = "regs", |
| 91 | .flags = IORESOURCE_MEM, |
| 92 | .start = AR7_REGS_VLYNQ0, |
| 93 | .end = AR7_REGS_VLYNQ0 + 0xff, |
| 94 | }, |
| 95 | { |
| 96 | .name = "irq", |
| 97 | .flags = IORESOURCE_IRQ, |
| 98 | .start = 29, |
| 99 | .end = 29, |
| 100 | }, |
| 101 | { |
| 102 | .name = "mem", |
| 103 | .flags = IORESOURCE_MEM, |
| 104 | .start = 0x04000000, |
| 105 | .end = 0x04ffffff, |
| 106 | }, |
| 107 | { |
| 108 | .name = "devirq", |
| 109 | .flags = IORESOURCE_IRQ, |
| 110 | .start = 80, |
| 111 | .end = 111, |
| 112 | }, |
| 113 | }; |
| 114 | |
| 115 | static struct resource vlynq_high_res[] = { |
| 116 | { |
| 117 | .name = "regs", |
| 118 | .flags = IORESOURCE_MEM, |
| 119 | .start = AR7_REGS_VLYNQ1, |
| 120 | .end = AR7_REGS_VLYNQ1 + 0xff, |
| 121 | }, |
| 122 | { |
| 123 | .name = "irq", |
| 124 | .flags = IORESOURCE_IRQ, |
| 125 | .start = 33, |
| 126 | .end = 33, |
| 127 | }, |
| 128 | { |
| 129 | .name = "mem", |
| 130 | .flags = IORESOURCE_MEM, |
| 131 | .start = 0x0c000000, |
| 132 | .end = 0x0cffffff, |
| 133 | }, |
| 134 | { |
| 135 | .name = "devirq", |
| 136 | .flags = IORESOURCE_IRQ, |
| 137 | .start = 112, |
| 138 | .end = 143, |
| 139 | }, |
| 140 | }; |
| 141 | |
| 142 | static struct plat_vlynq_data vlynq_low_data = { |
| 143 | .ops = { |
| 144 | .on = vlynq_on, |
| 145 | .off = vlynq_off, |
| 146 | }, |
| 147 | .reset_bit = 20, |
| 148 | .gpio_bit = 18, |
| 149 | }; |
| 150 | |
| 151 | static struct plat_vlynq_data vlynq_high_data = { |
| 152 | .ops = { |
| 153 | .on = vlynq_on, |
| 154 | .off = vlynq_off, |
| 155 | }, |
| 156 | .reset_bit = 16, |
| 157 | .gpio_bit = 19, |
| 158 | }; |
| 159 | |
| 160 | static struct platform_device vlynq_low = { |
| 161 | .id = 0, |
| 162 | .name = "vlynq", |
| 163 | .dev = { |
| 164 | .platform_data = &vlynq_low_data, |
| 165 | }, |
| 166 | .resource = vlynq_low_res, |
| 167 | .num_resources = ARRAY_SIZE(vlynq_low_res), |
| 168 | }; |
| 169 | |
| 170 | static struct platform_device vlynq_high = { |
| 171 | .id = 1, |
| 172 | .name = "vlynq", |
| 173 | .dev = { |
| 174 | .platform_data = &vlynq_high_data, |
| 175 | }, |
| 176 | .resource = vlynq_high_res, |
| 177 | .num_resources = ARRAY_SIZE(vlynq_high_res), |
| 178 | }; |
| 179 | |
| 180 | /***************************************************************************** |
| 181 | * Flash |
| 182 | ****************************************************************************/ |
| 183 | static struct resource physmap_flash_resource = { |
| 184 | .name = "mem", |
| 185 | .flags = IORESOURCE_MEM, |
| 186 | .start = 0x10000000, |
| 187 | .end = 0x107fffff, |
| 188 | }; |
| 189 | |
| 190 | static const char *ar7_probe_types[] = { "ar7part", NULL }; |
| 191 | |
| 192 | static struct physmap_flash_data physmap_flash_data = { |
| 193 | .width = 2, |
| 194 | .part_probe_types = ar7_probe_types, |
| 195 | }; |
| 196 | |
| 197 | static struct platform_device physmap_flash = { |
| 198 | .name = "physmap-flash", |
| 199 | .dev = { |
| 200 | .platform_data = &physmap_flash_data, |
| 201 | }, |
| 202 | .resource = &physmap_flash_resource, |
| 203 | .num_resources = 1, |
| 204 | }; |
| 205 | |
| 206 | /***************************************************************************** |
| 207 | * Ethernet |
| 208 | ****************************************************************************/ |
| 209 | static struct resource cpmac_low_res[] = { |
| 210 | { |
| 211 | .name = "regs", |
| 212 | .flags = IORESOURCE_MEM, |
| 213 | .start = AR7_REGS_MAC0, |
| 214 | .end = AR7_REGS_MAC0 + 0x7ff, |
| 215 | }, |
| 216 | { |
| 217 | .name = "irq", |
| 218 | .flags = IORESOURCE_IRQ, |
| 219 | .start = 27, |
| 220 | .end = 27, |
| 221 | }, |
| 222 | }; |
| 223 | |
| 224 | static struct resource cpmac_high_res[] = { |
| 225 | { |
| 226 | .name = "regs", |
| 227 | .flags = IORESOURCE_MEM, |
| 228 | .start = AR7_REGS_MAC1, |
| 229 | .end = AR7_REGS_MAC1 + 0x7ff, |
| 230 | }, |
| 231 | { |
| 232 | .name = "irq", |
| 233 | .flags = IORESOURCE_IRQ, |
| 234 | .start = 41, |
| 235 | .end = 41, |
| 236 | }, |
| 237 | }; |
| 238 | |
| 239 | static struct fixed_phy_status fixed_phy_status __initdata = { |
| 240 | .link = 1, |
| 241 | .speed = 100, |
| 242 | .duplex = 1, |
| 243 | }; |
| 244 | |
| 245 | static struct plat_cpmac_data cpmac_low_data = { |
| 246 | .reset_bit = 17, |
| 247 | .power_bit = 20, |
| 248 | .phy_mask = 0x80000000, |
| 249 | }; |
| 250 | |
| 251 | static struct plat_cpmac_data cpmac_high_data = { |
| 252 | .reset_bit = 21, |
| 253 | .power_bit = 22, |
| 254 | .phy_mask = 0x7fffffff, |
| 255 | }; |
| 256 | |
| 257 | static u64 cpmac_dma_mask = DMA_BIT_MASK(32); |
| 258 | |
| 259 | static struct platform_device cpmac_low = { |
| 260 | .id = 0, |
| 261 | .name = "cpmac", |
| 262 | .dev = { |
| 263 | .dma_mask = &cpmac_dma_mask, |
| 264 | .coherent_dma_mask = DMA_BIT_MASK(32), |
| 265 | .platform_data = &cpmac_low_data, |
| 266 | }, |
| 267 | .resource = cpmac_low_res, |
| 268 | .num_resources = ARRAY_SIZE(cpmac_low_res), |
| 269 | }; |
| 270 | |
| 271 | static struct platform_device cpmac_high = { |
| 272 | .id = 1, |
| 273 | .name = "cpmac", |
| 274 | .dev = { |
| 275 | .dma_mask = &cpmac_dma_mask, |
| 276 | .coherent_dma_mask = DMA_BIT_MASK(32), |
| 277 | .platform_data = &cpmac_high_data, |
| 278 | }, |
| 279 | .resource = cpmac_high_res, |
| 280 | .num_resources = ARRAY_SIZE(cpmac_high_res), |
| 281 | }; |
| 282 | |
| 283 | static void __init cpmac_get_mac(int instance, unsigned char *dev_addr) |
| 284 | { |
| 285 | char name[5], *mac; |
| 286 | |
| 287 | sprintf(name, "mac%c", 'a' + instance); |
| 288 | mac = prom_getenv(name); |
| 289 | if (!mac && instance) { |
| 290 | sprintf(name, "mac%c", 'a'); |
| 291 | mac = prom_getenv(name); |
| 292 | } |
| 293 | |
| 294 | if (mac) { |
| 295 | if (!mac_pton(mac, dev_addr)) { |
| 296 | pr_warn("cannot parse mac address, using random address\n"); |
| 297 | eth_random_addr(dev_addr); |
| 298 | } |
| 299 | } else |
| 300 | eth_random_addr(dev_addr); |
| 301 | } |
| 302 | |
| 303 | /***************************************************************************** |
| 304 | * USB |
| 305 | ****************************************************************************/ |
| 306 | static struct resource usb_res[] = { |
| 307 | { |
| 308 | .name = "regs", |
| 309 | .flags = IORESOURCE_MEM, |
| 310 | .start = AR7_REGS_USB, |
| 311 | .end = AR7_REGS_USB + 0xff, |
| 312 | }, |
| 313 | { |
| 314 | .name = "irq", |
| 315 | .flags = IORESOURCE_IRQ, |
| 316 | .start = 32, |
| 317 | .end = 32, |
| 318 | }, |
| 319 | { |
| 320 | .name = "mem", |
| 321 | .flags = IORESOURCE_MEM, |
| 322 | .start = 0x03400000, |
| 323 | .end = 0x03401fff, |
| 324 | }, |
| 325 | }; |
| 326 | |
| 327 | static struct platform_device ar7_udc = { |
| 328 | .name = "ar7_udc", |
| 329 | .resource = usb_res, |
| 330 | .num_resources = ARRAY_SIZE(usb_res), |
| 331 | }; |
| 332 | |
| 333 | /***************************************************************************** |
| 334 | * LEDs |
| 335 | ****************************************************************************/ |
| 336 | static const struct gpio_led default_leds[] = { |
| 337 | { |
| 338 | .name = "status", |
| 339 | .gpio = 8, |
| 340 | .active_low = 1, |
| 341 | }, |
| 342 | }; |
| 343 | |
| 344 | static const struct gpio_led titan_leds[] = { |
| 345 | { .name = "status", .gpio = 8, .active_low = 1, }, |
| 346 | { .name = "wifi", .gpio = 13, .active_low = 1, }, |
| 347 | }; |
| 348 | |
| 349 | static const struct gpio_led dsl502t_leds[] = { |
| 350 | { |
| 351 | .name = "status", |
| 352 | .gpio = 9, |
| 353 | .active_low = 1, |
| 354 | }, |
| 355 | { |
| 356 | .name = "ethernet", |
| 357 | .gpio = 7, |
| 358 | .active_low = 1, |
| 359 | }, |
| 360 | { |
| 361 | .name = "usb", |
| 362 | .gpio = 12, |
| 363 | .active_low = 1, |
| 364 | }, |
| 365 | }; |
| 366 | |
| 367 | static const struct gpio_led dg834g_leds[] = { |
| 368 | { |
| 369 | .name = "ppp", |
| 370 | .gpio = 6, |
| 371 | .active_low = 1, |
| 372 | }, |
| 373 | { |
| 374 | .name = "status", |
| 375 | .gpio = 7, |
| 376 | .active_low = 1, |
| 377 | }, |
| 378 | { |
| 379 | .name = "adsl", |
| 380 | .gpio = 8, |
| 381 | .active_low = 1, |
| 382 | }, |
| 383 | { |
| 384 | .name = "wifi", |
| 385 | .gpio = 12, |
| 386 | .active_low = 1, |
| 387 | }, |
| 388 | { |
| 389 | .name = "power", |
| 390 | .gpio = 14, |
| 391 | .active_low = 1, |
| 392 | .default_trigger = "default-on", |
| 393 | }, |
| 394 | }; |
| 395 | |
| 396 | static const struct gpio_led fb_sl_leds[] = { |
| 397 | { |
| 398 | .name = "1", |
| 399 | .gpio = 7, |
| 400 | }, |
| 401 | { |
| 402 | .name = "2", |
| 403 | .gpio = 13, |
| 404 | .active_low = 1, |
| 405 | }, |
| 406 | { |
| 407 | .name = "3", |
| 408 | .gpio = 10, |
| 409 | .active_low = 1, |
| 410 | }, |
| 411 | { |
| 412 | .name = "4", |
| 413 | .gpio = 12, |
| 414 | .active_low = 1, |
| 415 | }, |
| 416 | { |
| 417 | .name = "5", |
| 418 | .gpio = 9, |
| 419 | .active_low = 1, |
| 420 | }, |
| 421 | }; |
| 422 | |
| 423 | static const struct gpio_led fb_fon_leds[] = { |
| 424 | { |
| 425 | .name = "1", |
| 426 | .gpio = 8, |
| 427 | }, |
| 428 | { |
| 429 | .name = "2", |
| 430 | .gpio = 3, |
| 431 | .active_low = 1, |
| 432 | }, |
| 433 | { |
| 434 | .name = "3", |
| 435 | .gpio = 5, |
| 436 | }, |
| 437 | { |
| 438 | .name = "4", |
| 439 | .gpio = 4, |
| 440 | .active_low = 1, |
| 441 | }, |
| 442 | { |
| 443 | .name = "5", |
| 444 | .gpio = 11, |
| 445 | .active_low = 1, |
| 446 | }, |
| 447 | }; |
| 448 | |
| 449 | static const struct gpio_led gt701_leds[] = { |
| 450 | { |
| 451 | .name = "inet:green", |
| 452 | .gpio = 13, |
| 453 | .active_low = 1, |
| 454 | }, |
| 455 | { |
| 456 | .name = "usb", |
| 457 | .gpio = 12, |
| 458 | .active_low = 1, |
| 459 | }, |
| 460 | { |
| 461 | .name = "inet:red", |
| 462 | .gpio = 9, |
| 463 | .active_low = 1, |
| 464 | }, |
| 465 | { |
| 466 | .name = "power:red", |
| 467 | .gpio = 7, |
| 468 | .active_low = 1, |
| 469 | }, |
| 470 | { |
| 471 | .name = "power:green", |
| 472 | .gpio = 8, |
| 473 | .active_low = 1, |
| 474 | .default_trigger = "default-on", |
| 475 | }, |
| 476 | { |
| 477 | .name = "ethernet", |
| 478 | .gpio = 10, |
| 479 | .active_low = 1, |
| 480 | }, |
| 481 | }; |
| 482 | |
| 483 | static struct gpio_led_platform_data ar7_led_data; |
| 484 | |
| 485 | static struct platform_device ar7_gpio_leds = { |
| 486 | .name = "leds-gpio", |
| 487 | .dev = { |
| 488 | .platform_data = &ar7_led_data, |
| 489 | } |
| 490 | }; |
| 491 | |
| 492 | static void __init detect_leds(void) |
| 493 | { |
| 494 | char *prid, *usb_prod; |
| 495 | |
| 496 | /* Default LEDs */ |
| 497 | ar7_led_data.num_leds = ARRAY_SIZE(default_leds); |
| 498 | ar7_led_data.leds = default_leds; |
| 499 | |
| 500 | /* FIXME: the whole thing is unreliable */ |
| 501 | prid = prom_getenv("ProductID"); |
| 502 | usb_prod = prom_getenv("usb_prod"); |
| 503 | |
| 504 | /* If we can't get the product id from PROM, use the default LEDs */ |
| 505 | if (!prid) |
| 506 | return; |
| 507 | |
| 508 | if (strstr(prid, "Fritz_Box_FON")) { |
| 509 | ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds); |
| 510 | ar7_led_data.leds = fb_fon_leds; |
| 511 | } else if (strstr(prid, "Fritz_Box_")) { |
| 512 | ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds); |
| 513 | ar7_led_data.leds = fb_sl_leds; |
| 514 | } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB")) |
| 515 | && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) { |
| 516 | ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds); |
| 517 | ar7_led_data.leds = dsl502t_leds; |
| 518 | } else if (strstr(prid, "DG834")) { |
| 519 | ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds); |
| 520 | ar7_led_data.leds = dg834g_leds; |
| 521 | } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) { |
| 522 | ar7_led_data.num_leds = ARRAY_SIZE(titan_leds); |
| 523 | ar7_led_data.leds = titan_leds; |
| 524 | } else if (strstr(prid, "GT701")) { |
| 525 | ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds); |
| 526 | ar7_led_data.leds = gt701_leds; |
| 527 | } |
| 528 | } |
| 529 | |
| 530 | /***************************************************************************** |
| 531 | * Watchdog |
| 532 | ****************************************************************************/ |
| 533 | static struct resource ar7_wdt_res = { |
| 534 | .name = "regs", |
| 535 | .flags = IORESOURCE_MEM, |
| 536 | .start = -1, /* Filled at runtime */ |
| 537 | .end = -1, /* Filled at runtime */ |
| 538 | }; |
| 539 | |
| 540 | static struct platform_device ar7_wdt = { |
| 541 | .name = "ar7_wdt", |
| 542 | .resource = &ar7_wdt_res, |
| 543 | .num_resources = 1, |
| 544 | }; |
| 545 | |
| 546 | /***************************************************************************** |
| 547 | * Init |
| 548 | ****************************************************************************/ |
| 549 | static int __init ar7_register_uarts(void) |
| 550 | { |
| 551 | #ifdef CONFIG_SERIAL_8250 |
| 552 | static struct uart_port uart_port __initdata; |
| 553 | struct clk *bus_clk; |
| 554 | int res; |
| 555 | |
| 556 | memset(&uart_port, 0, sizeof(struct uart_port)); |
| 557 | |
| 558 | bus_clk = clk_get(NULL, "bus"); |
| 559 | if (IS_ERR(bus_clk)) |
| 560 | panic("unable to get bus clk"); |
| 561 | |
| 562 | uart_port.type = PORT_AR7; |
| 563 | uart_port.uartclk = clk_get_rate(bus_clk) / 2; |
| 564 | uart_port.iotype = UPIO_MEM32; |
| 565 | uart_port.flags = UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF; |
| 566 | uart_port.regshift = 2; |
| 567 | |
| 568 | uart_port.line = 0; |
| 569 | uart_port.irq = AR7_IRQ_UART0; |
| 570 | uart_port.mapbase = AR7_REGS_UART0; |
| 571 | uart_port.membase = ioremap(uart_port.mapbase, 256); |
| 572 | |
| 573 | res = early_serial_setup(&uart_port); |
| 574 | if (res) |
| 575 | return res; |
| 576 | |
| 577 | /* Only TNETD73xx have a second serial port */ |
| 578 | if (ar7_has_second_uart()) { |
| 579 | uart_port.line = 1; |
| 580 | uart_port.irq = AR7_IRQ_UART1; |
| 581 | uart_port.mapbase = UR8_REGS_UART1; |
| 582 | uart_port.membase = ioremap(uart_port.mapbase, 256); |
| 583 | |
| 584 | res = early_serial_setup(&uart_port); |
| 585 | if (res) |
| 586 | return res; |
| 587 | } |
| 588 | #endif |
| 589 | |
| 590 | return 0; |
| 591 | } |
| 592 | |
| 593 | static void __init titan_fixup_devices(void) |
| 594 | { |
| 595 | /* Set vlynq0 data */ |
| 596 | vlynq_low_data.reset_bit = 15; |
| 597 | vlynq_low_data.gpio_bit = 14; |
| 598 | |
| 599 | /* Set vlynq1 data */ |
| 600 | vlynq_high_data.reset_bit = 16; |
| 601 | vlynq_high_data.gpio_bit = 7; |
| 602 | |
| 603 | /* Set vlynq0 resources */ |
| 604 | vlynq_low_res[0].start = TITAN_REGS_VLYNQ0; |
| 605 | vlynq_low_res[0].end = TITAN_REGS_VLYNQ0 + 0xff; |
| 606 | vlynq_low_res[1].start = 33; |
| 607 | vlynq_low_res[1].end = 33; |
| 608 | vlynq_low_res[2].start = 0x0c000000; |
| 609 | vlynq_low_res[2].end = 0x0fffffff; |
| 610 | vlynq_low_res[3].start = 80; |
| 611 | vlynq_low_res[3].end = 111; |
| 612 | |
| 613 | /* Set vlynq1 resources */ |
| 614 | vlynq_high_res[0].start = TITAN_REGS_VLYNQ1; |
| 615 | vlynq_high_res[0].end = TITAN_REGS_VLYNQ1 + 0xff; |
| 616 | vlynq_high_res[1].start = 34; |
| 617 | vlynq_high_res[1].end = 34; |
| 618 | vlynq_high_res[2].start = 0x40000000; |
| 619 | vlynq_high_res[2].end = 0x43ffffff; |
| 620 | vlynq_high_res[3].start = 112; |
| 621 | vlynq_high_res[3].end = 143; |
| 622 | |
| 623 | /* Set cpmac0 data */ |
| 624 | cpmac_low_data.phy_mask = 0x40000000; |
| 625 | |
| 626 | /* Set cpmac1 data */ |
| 627 | cpmac_high_data.phy_mask = 0x80000000; |
| 628 | |
| 629 | /* Set cpmac0 resources */ |
| 630 | cpmac_low_res[0].start = TITAN_REGS_MAC0; |
| 631 | cpmac_low_res[0].end = TITAN_REGS_MAC0 + 0x7ff; |
| 632 | |
| 633 | /* Set cpmac1 resources */ |
| 634 | cpmac_high_res[0].start = TITAN_REGS_MAC1; |
| 635 | cpmac_high_res[0].end = TITAN_REGS_MAC1 + 0x7ff; |
| 636 | } |
| 637 | |
| 638 | static int __init ar7_register_devices(void) |
| 639 | { |
| 640 | void __iomem *bootcr; |
| 641 | u32 val; |
| 642 | int res; |
| 643 | |
| 644 | res = ar7_gpio_init(); |
| 645 | if (res) |
| 646 | pr_warn("unable to register gpios: %d\n", res); |
| 647 | |
| 648 | res = ar7_register_uarts(); |
| 649 | if (res) |
| 650 | pr_err("unable to setup uart(s): %d\n", res); |
| 651 | |
| 652 | res = platform_device_register(&physmap_flash); |
| 653 | if (res) |
| 654 | pr_warn("unable to register physmap-flash: %d\n", res); |
| 655 | |
| 656 | if (ar7_is_titan()) |
| 657 | titan_fixup_devices(); |
| 658 | |
| 659 | ar7_device_disable(vlynq_low_data.reset_bit); |
| 660 | res = platform_device_register(&vlynq_low); |
| 661 | if (res) |
| 662 | pr_warn("unable to register vlynq-low: %d\n", res); |
| 663 | |
| 664 | if (ar7_has_high_vlynq()) { |
| 665 | ar7_device_disable(vlynq_high_data.reset_bit); |
| 666 | res = platform_device_register(&vlynq_high); |
| 667 | if (res) |
| 668 | pr_warn("unable to register vlynq-high: %d\n", res); |
| 669 | } |
| 670 | |
| 671 | if (ar7_has_high_cpmac()) { |
| 672 | res = fixed_phy_add(PHY_POLL, cpmac_high.id, |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 673 | &fixed_phy_status); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 674 | if (!res) { |
| 675 | cpmac_get_mac(1, cpmac_high_data.dev_addr); |
| 676 | |
| 677 | res = platform_device_register(&cpmac_high); |
| 678 | if (res) |
| 679 | pr_warn("unable to register cpmac-high: %d\n", |
| 680 | res); |
| 681 | } else |
| 682 | pr_warn("unable to add cpmac-high phy: %d\n", res); |
| 683 | } else |
| 684 | cpmac_low_data.phy_mask = 0xffffffff; |
| 685 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 686 | res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 687 | if (!res) { |
| 688 | cpmac_get_mac(0, cpmac_low_data.dev_addr); |
| 689 | res = platform_device_register(&cpmac_low); |
| 690 | if (res) |
| 691 | pr_warn("unable to register cpmac-low: %d\n", res); |
| 692 | } else |
| 693 | pr_warn("unable to add cpmac-low phy: %d\n", res); |
| 694 | |
| 695 | detect_leds(); |
| 696 | res = platform_device_register(&ar7_gpio_leds); |
| 697 | if (res) |
| 698 | pr_warn("unable to register leds: %d\n", res); |
| 699 | |
| 700 | res = platform_device_register(&ar7_udc); |
| 701 | if (res) |
| 702 | pr_warn("unable to register usb slave: %d\n", res); |
| 703 | |
| 704 | /* Register watchdog only if enabled in hardware */ |
| 705 | bootcr = ioremap_nocache(AR7_REGS_DCL, 4); |
| 706 | val = readl(bootcr); |
| 707 | iounmap(bootcr); |
| 708 | if (val & AR7_WDT_HW_ENA) { |
| 709 | if (ar7_has_high_vlynq()) |
| 710 | ar7_wdt_res.start = UR8_REGS_WDT; |
| 711 | else |
| 712 | ar7_wdt_res.start = AR7_REGS_WDT; |
| 713 | |
| 714 | ar7_wdt_res.end = ar7_wdt_res.start + 0x20; |
| 715 | res = platform_device_register(&ar7_wdt); |
| 716 | if (res) |
| 717 | pr_warn("unable to register watchdog: %d\n", res); |
| 718 | } |
| 719 | |
| 720 | return 0; |
| 721 | } |
| 722 | device_initcall(ar7_register_devices); |