Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-1.0+ |
| 2 | /* |
| 3 | * Renesas USB driver |
| 4 | * |
| 5 | * Copyright (C) 2011 Renesas Solutions Corp. |
| 6 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| 7 | */ |
| 8 | #include <linux/delay.h> |
| 9 | #include <linux/io.h> |
| 10 | #include <linux/scatterlist.h> |
| 11 | #include "common.h" |
| 12 | #include "pipe.h" |
| 13 | |
| 14 | #define usbhsf_get_cfifo(p) (&((p)->fifo_info.cfifo)) |
| 15 | #define usbhsf_is_cfifo(p, f) (usbhsf_get_cfifo(p) == f) |
| 16 | |
| 17 | #define usbhsf_fifo_is_busy(f) ((f)->pipe) /* see usbhs_pipe_select_fifo */ |
| 18 | |
| 19 | /* |
| 20 | * packet initialize |
| 21 | */ |
| 22 | void usbhs_pkt_init(struct usbhs_pkt *pkt) |
| 23 | { |
| 24 | INIT_LIST_HEAD(&pkt->node); |
| 25 | } |
| 26 | |
| 27 | /* |
| 28 | * packet control function |
| 29 | */ |
| 30 | static int usbhsf_null_handle(struct usbhs_pkt *pkt, int *is_done) |
| 31 | { |
| 32 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); |
| 33 | struct device *dev = usbhs_priv_to_dev(priv); |
| 34 | |
| 35 | dev_err(dev, "null handler\n"); |
| 36 | |
| 37 | return -EINVAL; |
| 38 | } |
| 39 | |
| 40 | static const struct usbhs_pkt_handle usbhsf_null_handler = { |
| 41 | .prepare = usbhsf_null_handle, |
| 42 | .try_run = usbhsf_null_handle, |
| 43 | }; |
| 44 | |
| 45 | void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt, |
| 46 | void (*done)(struct usbhs_priv *priv, |
| 47 | struct usbhs_pkt *pkt), |
| 48 | void *buf, int len, int zero, int sequence) |
| 49 | { |
| 50 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 51 | struct device *dev = usbhs_priv_to_dev(priv); |
| 52 | unsigned long flags; |
| 53 | |
| 54 | if (!done) { |
| 55 | dev_err(dev, "no done function\n"); |
| 56 | return; |
| 57 | } |
| 58 | |
| 59 | /******************** spin lock ********************/ |
| 60 | usbhs_lock(priv, flags); |
| 61 | |
| 62 | if (!pipe->handler) { |
| 63 | dev_err(dev, "no handler function\n"); |
| 64 | pipe->handler = &usbhsf_null_handler; |
| 65 | } |
| 66 | |
| 67 | list_move_tail(&pkt->node, &pipe->list); |
| 68 | |
| 69 | /* |
| 70 | * each pkt must hold own handler. |
| 71 | * because handler might be changed by its situation. |
| 72 | * dma handler -> pio handler. |
| 73 | */ |
| 74 | pkt->pipe = pipe; |
| 75 | pkt->buf = buf; |
| 76 | pkt->handler = pipe->handler; |
| 77 | pkt->length = len; |
| 78 | pkt->zero = zero; |
| 79 | pkt->actual = 0; |
| 80 | pkt->done = done; |
| 81 | pkt->sequence = sequence; |
| 82 | |
| 83 | usbhs_unlock(priv, flags); |
| 84 | /******************** spin unlock ******************/ |
| 85 | } |
| 86 | |
| 87 | static void __usbhsf_pkt_del(struct usbhs_pkt *pkt) |
| 88 | { |
| 89 | list_del_init(&pkt->node); |
| 90 | } |
| 91 | |
| 92 | static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe) |
| 93 | { |
| 94 | return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node); |
| 95 | } |
| 96 | |
| 97 | static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe, |
| 98 | struct usbhs_fifo *fifo); |
| 99 | static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, |
| 100 | struct usbhs_pkt *pkt); |
| 101 | #define usbhsf_dma_map(p) __usbhsf_dma_map_ctrl(p, 1) |
| 102 | #define usbhsf_dma_unmap(p) __usbhsf_dma_map_ctrl(p, 0) |
| 103 | static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map); |
| 104 | struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) |
| 105 | { |
| 106 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 107 | struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); |
| 108 | unsigned long flags; |
| 109 | |
| 110 | /******************** spin lock ********************/ |
| 111 | usbhs_lock(priv, flags); |
| 112 | |
| 113 | usbhs_pipe_disable(pipe); |
| 114 | |
| 115 | if (!pkt) |
| 116 | pkt = __usbhsf_pkt_get(pipe); |
| 117 | |
| 118 | if (pkt) { |
| 119 | struct dma_chan *chan = NULL; |
| 120 | |
| 121 | if (fifo) |
| 122 | chan = usbhsf_dma_chan_get(fifo, pkt); |
| 123 | if (chan) { |
| 124 | dmaengine_terminate_all(chan); |
| 125 | usbhsf_dma_unmap(pkt); |
| 126 | } |
| 127 | |
| 128 | usbhs_pipe_clear_without_sequence(pipe, 0, 0); |
| 129 | |
| 130 | __usbhsf_pkt_del(pkt); |
| 131 | } |
| 132 | |
| 133 | if (fifo) |
| 134 | usbhsf_fifo_unselect(pipe, fifo); |
| 135 | |
| 136 | usbhs_unlock(priv, flags); |
| 137 | /******************** spin unlock ******************/ |
| 138 | |
| 139 | return pkt; |
| 140 | } |
| 141 | |
| 142 | enum { |
| 143 | USBHSF_PKT_PREPARE, |
| 144 | USBHSF_PKT_TRY_RUN, |
| 145 | USBHSF_PKT_DMA_DONE, |
| 146 | }; |
| 147 | |
| 148 | static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type) |
| 149 | { |
| 150 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 151 | struct usbhs_pkt *pkt; |
| 152 | struct device *dev = usbhs_priv_to_dev(priv); |
| 153 | int (*func)(struct usbhs_pkt *pkt, int *is_done); |
| 154 | unsigned long flags; |
| 155 | int ret = 0; |
| 156 | int is_done = 0; |
| 157 | |
| 158 | /******************** spin lock ********************/ |
| 159 | usbhs_lock(priv, flags); |
| 160 | |
| 161 | pkt = __usbhsf_pkt_get(pipe); |
| 162 | if (!pkt) |
| 163 | goto __usbhs_pkt_handler_end; |
| 164 | |
| 165 | switch (type) { |
| 166 | case USBHSF_PKT_PREPARE: |
| 167 | func = pkt->handler->prepare; |
| 168 | break; |
| 169 | case USBHSF_PKT_TRY_RUN: |
| 170 | func = pkt->handler->try_run; |
| 171 | break; |
| 172 | case USBHSF_PKT_DMA_DONE: |
| 173 | func = pkt->handler->dma_done; |
| 174 | break; |
| 175 | default: |
| 176 | dev_err(dev, "unknown pkt handler\n"); |
| 177 | goto __usbhs_pkt_handler_end; |
| 178 | } |
| 179 | |
| 180 | if (likely(func)) |
| 181 | ret = func(pkt, &is_done); |
| 182 | |
| 183 | if (is_done) |
| 184 | __usbhsf_pkt_del(pkt); |
| 185 | |
| 186 | __usbhs_pkt_handler_end: |
| 187 | usbhs_unlock(priv, flags); |
| 188 | /******************** spin unlock ******************/ |
| 189 | |
| 190 | if (is_done) { |
| 191 | pkt->done(priv, pkt); |
| 192 | usbhs_pkt_start(pipe); |
| 193 | } |
| 194 | |
| 195 | return ret; |
| 196 | } |
| 197 | |
| 198 | void usbhs_pkt_start(struct usbhs_pipe *pipe) |
| 199 | { |
| 200 | usbhsf_pkt_handler(pipe, USBHSF_PKT_PREPARE); |
| 201 | } |
| 202 | |
| 203 | /* |
| 204 | * irq enable/disable function |
| 205 | */ |
| 206 | #define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e) |
| 207 | #define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e) |
| 208 | #define usbhsf_irq_callback_ctrl(pipe, status, enable) \ |
| 209 | ({ \ |
| 210 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); \ |
| 211 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); \ |
| 212 | u16 status = (1 << usbhs_pipe_number(pipe)); \ |
| 213 | if (!mod) \ |
| 214 | return; \ |
| 215 | if (enable) \ |
| 216 | mod->status |= status; \ |
| 217 | else \ |
| 218 | mod->status &= ~status; \ |
| 219 | usbhs_irq_callback_update(priv, mod); \ |
| 220 | }) |
| 221 | |
| 222 | static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable) |
| 223 | { |
| 224 | /* |
| 225 | * And DCP pipe can NOT use "ready interrupt" for "send" |
| 226 | * it should use "empty" interrupt. |
| 227 | * see |
| 228 | * "Operation" - "Interrupt Function" - "BRDY Interrupt" |
| 229 | * |
| 230 | * on the other hand, normal pipe can use "ready interrupt" for "send" |
| 231 | * even though it is single/double buffer |
| 232 | */ |
| 233 | if (usbhs_pipe_is_dcp(pipe)) |
| 234 | usbhsf_irq_empty_ctrl(pipe, enable); |
| 235 | else |
| 236 | usbhsf_irq_ready_ctrl(pipe, enable); |
| 237 | } |
| 238 | |
| 239 | static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable) |
| 240 | { |
| 241 | usbhsf_irq_ready_ctrl(pipe, enable); |
| 242 | } |
| 243 | |
| 244 | /* |
| 245 | * FIFO ctrl |
| 246 | */ |
| 247 | static void usbhsf_send_terminator(struct usbhs_pipe *pipe, |
| 248 | struct usbhs_fifo *fifo) |
| 249 | { |
| 250 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 251 | |
| 252 | usbhs_bset(priv, fifo->ctr, BVAL, BVAL); |
| 253 | } |
| 254 | |
| 255 | static int usbhsf_fifo_barrier(struct usbhs_priv *priv, |
| 256 | struct usbhs_fifo *fifo) |
| 257 | { |
| 258 | /* The FIFO port is accessible */ |
| 259 | if (usbhs_read(priv, fifo->ctr) & FRDY) |
| 260 | return 0; |
| 261 | |
| 262 | return -EBUSY; |
| 263 | } |
| 264 | |
| 265 | static void usbhsf_fifo_clear(struct usbhs_pipe *pipe, |
| 266 | struct usbhs_fifo *fifo) |
| 267 | { |
| 268 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 269 | int ret = 0; |
| 270 | |
| 271 | if (!usbhs_pipe_is_dcp(pipe)) { |
| 272 | /* |
| 273 | * This driver checks the pipe condition first to avoid -EBUSY |
| 274 | * from usbhsf_fifo_barrier() if the pipe is RX direction and |
| 275 | * empty. |
| 276 | */ |
| 277 | if (usbhs_pipe_is_dir_in(pipe)) |
| 278 | ret = usbhs_pipe_is_accessible(pipe); |
| 279 | if (!ret) |
| 280 | ret = usbhsf_fifo_barrier(priv, fifo); |
| 281 | } |
| 282 | |
| 283 | /* |
| 284 | * if non-DCP pipe, this driver should set BCLR when |
| 285 | * usbhsf_fifo_barrier() returns 0. |
| 286 | */ |
| 287 | if (!ret) |
| 288 | usbhs_write(priv, fifo->ctr, BCLR); |
| 289 | } |
| 290 | |
| 291 | static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv, |
| 292 | struct usbhs_fifo *fifo) |
| 293 | { |
| 294 | return usbhs_read(priv, fifo->ctr) & DTLN_MASK; |
| 295 | } |
| 296 | |
| 297 | static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe, |
| 298 | struct usbhs_fifo *fifo) |
| 299 | { |
| 300 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 301 | |
| 302 | usbhs_pipe_select_fifo(pipe, NULL); |
| 303 | usbhs_write(priv, fifo->sel, 0); |
| 304 | } |
| 305 | |
| 306 | static int usbhsf_fifo_select(struct usbhs_pipe *pipe, |
| 307 | struct usbhs_fifo *fifo, |
| 308 | int write) |
| 309 | { |
| 310 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 311 | struct device *dev = usbhs_priv_to_dev(priv); |
| 312 | int timeout = 1024; |
| 313 | u16 mask = ((1 << 5) | 0xF); /* mask of ISEL | CURPIPE */ |
| 314 | u16 base = usbhs_pipe_number(pipe); /* CURPIPE */ |
| 315 | |
| 316 | if (usbhs_pipe_is_busy(pipe) || |
| 317 | usbhsf_fifo_is_busy(fifo)) |
| 318 | return -EBUSY; |
| 319 | |
| 320 | if (usbhs_pipe_is_dcp(pipe)) { |
| 321 | base |= (1 == write) << 5; /* ISEL */ |
| 322 | |
| 323 | if (usbhs_mod_is_host(priv)) |
| 324 | usbhs_dcp_dir_for_host(pipe, write); |
| 325 | } |
| 326 | |
| 327 | /* "base" will be used below */ |
| 328 | if (usbhs_get_dparam(priv, has_sudmac) && !usbhsf_is_cfifo(priv, fifo)) |
| 329 | usbhs_write(priv, fifo->sel, base); |
| 330 | else |
| 331 | usbhs_write(priv, fifo->sel, base | MBW_32); |
| 332 | |
| 333 | /* check ISEL and CURPIPE value */ |
| 334 | while (timeout--) { |
| 335 | if (base == (mask & usbhs_read(priv, fifo->sel))) { |
| 336 | usbhs_pipe_select_fifo(pipe, fifo); |
| 337 | return 0; |
| 338 | } |
| 339 | udelay(10); |
| 340 | } |
| 341 | |
| 342 | dev_err(dev, "fifo select error\n"); |
| 343 | |
| 344 | return -EIO; |
| 345 | } |
| 346 | |
| 347 | /* |
| 348 | * DCP status stage |
| 349 | */ |
| 350 | static int usbhs_dcp_dir_switch_to_write(struct usbhs_pkt *pkt, int *is_done) |
| 351 | { |
| 352 | struct usbhs_pipe *pipe = pkt->pipe; |
| 353 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 354 | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ |
| 355 | struct device *dev = usbhs_priv_to_dev(priv); |
| 356 | int ret; |
| 357 | |
| 358 | usbhs_pipe_disable(pipe); |
| 359 | |
| 360 | ret = usbhsf_fifo_select(pipe, fifo, 1); |
| 361 | if (ret < 0) { |
| 362 | dev_err(dev, "%s() faile\n", __func__); |
| 363 | return ret; |
| 364 | } |
| 365 | |
| 366 | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ |
| 367 | |
| 368 | usbhsf_fifo_clear(pipe, fifo); |
| 369 | usbhsf_send_terminator(pipe, fifo); |
| 370 | |
| 371 | usbhsf_fifo_unselect(pipe, fifo); |
| 372 | |
| 373 | usbhsf_tx_irq_ctrl(pipe, 1); |
| 374 | usbhs_pipe_enable(pipe); |
| 375 | |
| 376 | return ret; |
| 377 | } |
| 378 | |
| 379 | static int usbhs_dcp_dir_switch_to_read(struct usbhs_pkt *pkt, int *is_done) |
| 380 | { |
| 381 | struct usbhs_pipe *pipe = pkt->pipe; |
| 382 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 383 | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ |
| 384 | struct device *dev = usbhs_priv_to_dev(priv); |
| 385 | int ret; |
| 386 | |
| 387 | usbhs_pipe_disable(pipe); |
| 388 | |
| 389 | ret = usbhsf_fifo_select(pipe, fifo, 0); |
| 390 | if (ret < 0) { |
| 391 | dev_err(dev, "%s() fail\n", __func__); |
| 392 | return ret; |
| 393 | } |
| 394 | |
| 395 | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ |
| 396 | usbhsf_fifo_clear(pipe, fifo); |
| 397 | |
| 398 | usbhsf_fifo_unselect(pipe, fifo); |
| 399 | |
| 400 | usbhsf_rx_irq_ctrl(pipe, 1); |
| 401 | usbhs_pipe_enable(pipe); |
| 402 | |
| 403 | return ret; |
| 404 | |
| 405 | } |
| 406 | |
| 407 | static int usbhs_dcp_dir_switch_done(struct usbhs_pkt *pkt, int *is_done) |
| 408 | { |
| 409 | struct usbhs_pipe *pipe = pkt->pipe; |
| 410 | |
| 411 | if (pkt->handler == &usbhs_dcp_status_stage_in_handler) |
| 412 | usbhsf_tx_irq_ctrl(pipe, 0); |
| 413 | else |
| 414 | usbhsf_rx_irq_ctrl(pipe, 0); |
| 415 | |
| 416 | pkt->actual = pkt->length; |
| 417 | *is_done = 1; |
| 418 | |
| 419 | return 0; |
| 420 | } |
| 421 | |
| 422 | const struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler = { |
| 423 | .prepare = usbhs_dcp_dir_switch_to_write, |
| 424 | .try_run = usbhs_dcp_dir_switch_done, |
| 425 | }; |
| 426 | |
| 427 | const struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler = { |
| 428 | .prepare = usbhs_dcp_dir_switch_to_read, |
| 429 | .try_run = usbhs_dcp_dir_switch_done, |
| 430 | }; |
| 431 | |
| 432 | /* |
| 433 | * DCP data stage (push) |
| 434 | */ |
| 435 | static int usbhsf_dcp_data_stage_try_push(struct usbhs_pkt *pkt, int *is_done) |
| 436 | { |
| 437 | struct usbhs_pipe *pipe = pkt->pipe; |
| 438 | |
| 439 | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ |
| 440 | |
| 441 | /* |
| 442 | * change handler to PIO push |
| 443 | */ |
| 444 | pkt->handler = &usbhs_fifo_pio_push_handler; |
| 445 | |
| 446 | return pkt->handler->prepare(pkt, is_done); |
| 447 | } |
| 448 | |
| 449 | const struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler = { |
| 450 | .prepare = usbhsf_dcp_data_stage_try_push, |
| 451 | }; |
| 452 | |
| 453 | /* |
| 454 | * DCP data stage (pop) |
| 455 | */ |
| 456 | static int usbhsf_dcp_data_stage_prepare_pop(struct usbhs_pkt *pkt, |
| 457 | int *is_done) |
| 458 | { |
| 459 | struct usbhs_pipe *pipe = pkt->pipe; |
| 460 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 461 | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); |
| 462 | |
| 463 | if (usbhs_pipe_is_busy(pipe)) |
| 464 | return 0; |
| 465 | |
| 466 | /* |
| 467 | * prepare pop for DCP should |
| 468 | * - change DCP direction, |
| 469 | * - clear fifo |
| 470 | * - DATA1 |
| 471 | */ |
| 472 | usbhs_pipe_disable(pipe); |
| 473 | |
| 474 | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ |
| 475 | |
| 476 | usbhsf_fifo_select(pipe, fifo, 0); |
| 477 | usbhsf_fifo_clear(pipe, fifo); |
| 478 | usbhsf_fifo_unselect(pipe, fifo); |
| 479 | |
| 480 | /* |
| 481 | * change handler to PIO pop |
| 482 | */ |
| 483 | pkt->handler = &usbhs_fifo_pio_pop_handler; |
| 484 | |
| 485 | return pkt->handler->prepare(pkt, is_done); |
| 486 | } |
| 487 | |
| 488 | const struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler = { |
| 489 | .prepare = usbhsf_dcp_data_stage_prepare_pop, |
| 490 | }; |
| 491 | |
| 492 | /* |
| 493 | * PIO push handler |
| 494 | */ |
| 495 | static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) |
| 496 | { |
| 497 | struct usbhs_pipe *pipe = pkt->pipe; |
| 498 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 499 | struct device *dev = usbhs_priv_to_dev(priv); |
| 500 | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ |
| 501 | void __iomem *addr = priv->base + fifo->port; |
| 502 | u8 *buf; |
| 503 | int maxp = usbhs_pipe_get_maxpacket(pipe); |
| 504 | int total_len; |
| 505 | int i, ret, len; |
| 506 | int is_short; |
| 507 | |
| 508 | usbhs_pipe_data_sequence(pipe, pkt->sequence); |
| 509 | pkt->sequence = -1; /* -1 sequence will be ignored */ |
| 510 | |
| 511 | usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); |
| 512 | |
| 513 | ret = usbhsf_fifo_select(pipe, fifo, 1); |
| 514 | if (ret < 0) |
| 515 | return 0; |
| 516 | |
| 517 | ret = usbhs_pipe_is_accessible(pipe); |
| 518 | if (ret < 0) { |
| 519 | /* inaccessible pipe is not an error */ |
| 520 | ret = 0; |
| 521 | goto usbhs_fifo_write_busy; |
| 522 | } |
| 523 | |
| 524 | ret = usbhsf_fifo_barrier(priv, fifo); |
| 525 | if (ret < 0) |
| 526 | goto usbhs_fifo_write_busy; |
| 527 | |
| 528 | buf = pkt->buf + pkt->actual; |
| 529 | len = pkt->length - pkt->actual; |
| 530 | len = min(len, maxp); |
| 531 | total_len = len; |
| 532 | is_short = total_len < maxp; |
| 533 | |
| 534 | /* |
| 535 | * FIXME |
| 536 | * |
| 537 | * 32-bit access only |
| 538 | */ |
| 539 | if (len >= 4 && !((unsigned long)buf & 0x03)) { |
| 540 | iowrite32_rep(addr, buf, len / 4); |
| 541 | len %= 4; |
| 542 | buf += total_len - len; |
| 543 | } |
| 544 | |
| 545 | /* the rest operation */ |
| 546 | for (i = 0; i < len; i++) |
| 547 | iowrite8(buf[i], addr + (0x03 - (i & 0x03))); |
| 548 | |
| 549 | /* |
| 550 | * variable update |
| 551 | */ |
| 552 | pkt->actual += total_len; |
| 553 | |
| 554 | if (pkt->actual < pkt->length) |
| 555 | *is_done = 0; /* there are remainder data */ |
| 556 | else if (is_short) |
| 557 | *is_done = 1; /* short packet */ |
| 558 | else |
| 559 | *is_done = !pkt->zero; /* send zero packet ? */ |
| 560 | |
| 561 | /* |
| 562 | * pipe/irq handling |
| 563 | */ |
| 564 | if (is_short) |
| 565 | usbhsf_send_terminator(pipe, fifo); |
| 566 | |
| 567 | usbhsf_tx_irq_ctrl(pipe, !*is_done); |
| 568 | usbhs_pipe_running(pipe, !*is_done); |
| 569 | usbhs_pipe_enable(pipe); |
| 570 | |
| 571 | dev_dbg(dev, " send %d (%d/ %d/ %d/ %d)\n", |
| 572 | usbhs_pipe_number(pipe), |
| 573 | pkt->length, pkt->actual, *is_done, pkt->zero); |
| 574 | |
| 575 | usbhsf_fifo_unselect(pipe, fifo); |
| 576 | |
| 577 | return 0; |
| 578 | |
| 579 | usbhs_fifo_write_busy: |
| 580 | usbhsf_fifo_unselect(pipe, fifo); |
| 581 | |
| 582 | /* |
| 583 | * pipe is busy. |
| 584 | * retry in interrupt |
| 585 | */ |
| 586 | usbhsf_tx_irq_ctrl(pipe, 1); |
| 587 | usbhs_pipe_running(pipe, 1); |
| 588 | |
| 589 | return ret; |
| 590 | } |
| 591 | |
| 592 | static int usbhsf_pio_prepare_push(struct usbhs_pkt *pkt, int *is_done) |
| 593 | { |
| 594 | if (usbhs_pipe_is_running(pkt->pipe)) |
| 595 | return 0; |
| 596 | |
| 597 | return usbhsf_pio_try_push(pkt, is_done); |
| 598 | } |
| 599 | |
| 600 | const struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = { |
| 601 | .prepare = usbhsf_pio_prepare_push, |
| 602 | .try_run = usbhsf_pio_try_push, |
| 603 | }; |
| 604 | |
| 605 | /* |
| 606 | * PIO pop handler |
| 607 | */ |
| 608 | static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done) |
| 609 | { |
| 610 | struct usbhs_pipe *pipe = pkt->pipe; |
| 611 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 612 | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); |
| 613 | |
| 614 | if (usbhs_pipe_is_busy(pipe)) |
| 615 | return 0; |
| 616 | |
| 617 | if (usbhs_pipe_is_running(pipe)) |
| 618 | return 0; |
| 619 | |
| 620 | /* |
| 621 | * pipe enable to prepare packet receive |
| 622 | */ |
| 623 | usbhs_pipe_data_sequence(pipe, pkt->sequence); |
| 624 | pkt->sequence = -1; /* -1 sequence will be ignored */ |
| 625 | |
| 626 | if (usbhs_pipe_is_dcp(pipe)) |
| 627 | usbhsf_fifo_clear(pipe, fifo); |
| 628 | |
| 629 | usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); |
| 630 | usbhs_pipe_enable(pipe); |
| 631 | usbhs_pipe_running(pipe, 1); |
| 632 | usbhsf_rx_irq_ctrl(pipe, 1); |
| 633 | |
| 634 | return 0; |
| 635 | } |
| 636 | |
| 637 | static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done) |
| 638 | { |
| 639 | struct usbhs_pipe *pipe = pkt->pipe; |
| 640 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 641 | struct device *dev = usbhs_priv_to_dev(priv); |
| 642 | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ |
| 643 | void __iomem *addr = priv->base + fifo->port; |
| 644 | u8 *buf; |
| 645 | u32 data = 0; |
| 646 | int maxp = usbhs_pipe_get_maxpacket(pipe); |
| 647 | int rcv_len, len; |
| 648 | int i, ret; |
| 649 | int total_len = 0; |
| 650 | |
| 651 | ret = usbhsf_fifo_select(pipe, fifo, 0); |
| 652 | if (ret < 0) |
| 653 | return 0; |
| 654 | |
| 655 | ret = usbhsf_fifo_barrier(priv, fifo); |
| 656 | if (ret < 0) |
| 657 | goto usbhs_fifo_read_busy; |
| 658 | |
| 659 | rcv_len = usbhsf_fifo_rcv_len(priv, fifo); |
| 660 | |
| 661 | buf = pkt->buf + pkt->actual; |
| 662 | len = pkt->length - pkt->actual; |
| 663 | len = min(len, rcv_len); |
| 664 | total_len = len; |
| 665 | |
| 666 | /* |
| 667 | * update actual length first here to decide disable pipe. |
| 668 | * if this pipe keeps BUF status and all data were popped, |
| 669 | * then, next interrupt/token will be issued again |
| 670 | */ |
| 671 | pkt->actual += total_len; |
| 672 | |
| 673 | if ((pkt->actual == pkt->length) || /* receive all data */ |
| 674 | (total_len < maxp)) { /* short packet */ |
| 675 | *is_done = 1; |
| 676 | usbhsf_rx_irq_ctrl(pipe, 0); |
| 677 | usbhs_pipe_running(pipe, 0); |
| 678 | /* |
| 679 | * If function mode, since this controller is possible to enter |
| 680 | * Control Write status stage at this timing, this driver |
| 681 | * should not disable the pipe. If such a case happens, this |
| 682 | * controller is not able to complete the status stage. |
| 683 | */ |
| 684 | if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe)) |
| 685 | usbhs_pipe_disable(pipe); /* disable pipe first */ |
| 686 | } |
| 687 | |
| 688 | /* |
| 689 | * Buffer clear if Zero-Length packet |
| 690 | * |
| 691 | * see |
| 692 | * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function" |
| 693 | */ |
| 694 | if (0 == rcv_len) { |
| 695 | pkt->zero = 1; |
| 696 | usbhsf_fifo_clear(pipe, fifo); |
| 697 | goto usbhs_fifo_read_end; |
| 698 | } |
| 699 | |
| 700 | /* |
| 701 | * FIXME |
| 702 | * |
| 703 | * 32-bit access only |
| 704 | */ |
| 705 | if (len >= 4 && !((unsigned long)buf & 0x03)) { |
| 706 | ioread32_rep(addr, buf, len / 4); |
| 707 | len %= 4; |
| 708 | buf += total_len - len; |
| 709 | } |
| 710 | |
| 711 | /* the rest operation */ |
| 712 | for (i = 0; i < len; i++) { |
| 713 | if (!(i & 0x03)) |
| 714 | data = ioread32(addr); |
| 715 | |
| 716 | buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; |
| 717 | } |
| 718 | |
| 719 | usbhs_fifo_read_end: |
| 720 | dev_dbg(dev, " recv %d (%d/ %d/ %d/ %d)\n", |
| 721 | usbhs_pipe_number(pipe), |
| 722 | pkt->length, pkt->actual, *is_done, pkt->zero); |
| 723 | |
| 724 | usbhs_fifo_read_busy: |
| 725 | usbhsf_fifo_unselect(pipe, fifo); |
| 726 | |
| 727 | return ret; |
| 728 | } |
| 729 | |
| 730 | const struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler = { |
| 731 | .prepare = usbhsf_prepare_pop, |
| 732 | .try_run = usbhsf_pio_try_pop, |
| 733 | }; |
| 734 | |
| 735 | /* |
| 736 | * DCP ctrol statge handler |
| 737 | */ |
| 738 | static int usbhsf_ctrl_stage_end(struct usbhs_pkt *pkt, int *is_done) |
| 739 | { |
| 740 | usbhs_dcp_control_transfer_done(pkt->pipe); |
| 741 | |
| 742 | *is_done = 1; |
| 743 | |
| 744 | return 0; |
| 745 | } |
| 746 | |
| 747 | const struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler = { |
| 748 | .prepare = usbhsf_ctrl_stage_end, |
| 749 | .try_run = usbhsf_ctrl_stage_end, |
| 750 | }; |
| 751 | |
| 752 | /* |
| 753 | * DMA fifo functions |
| 754 | */ |
| 755 | static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, |
| 756 | struct usbhs_pkt *pkt) |
| 757 | { |
| 758 | if (&usbhs_fifo_dma_push_handler == pkt->handler) |
| 759 | return fifo->tx_chan; |
| 760 | |
| 761 | if (&usbhs_fifo_dma_pop_handler == pkt->handler) |
| 762 | return fifo->rx_chan; |
| 763 | |
| 764 | return NULL; |
| 765 | } |
| 766 | |
| 767 | static struct usbhs_fifo *usbhsf_get_dma_fifo(struct usbhs_priv *priv, |
| 768 | struct usbhs_pkt *pkt) |
| 769 | { |
| 770 | struct usbhs_fifo *fifo; |
| 771 | int i; |
| 772 | |
| 773 | usbhs_for_each_dfifo(priv, fifo, i) { |
| 774 | if (usbhsf_dma_chan_get(fifo, pkt) && |
| 775 | !usbhsf_fifo_is_busy(fifo)) |
| 776 | return fifo; |
| 777 | } |
| 778 | |
| 779 | return NULL; |
| 780 | } |
| 781 | |
| 782 | #define usbhsf_dma_start(p, f) __usbhsf_dma_ctrl(p, f, DREQE) |
| 783 | #define usbhsf_dma_stop(p, f) __usbhsf_dma_ctrl(p, f, 0) |
| 784 | static void __usbhsf_dma_ctrl(struct usbhs_pipe *pipe, |
| 785 | struct usbhs_fifo *fifo, |
| 786 | u16 dreqe) |
| 787 | { |
| 788 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 789 | |
| 790 | usbhs_bset(priv, fifo->sel, DREQE, dreqe); |
| 791 | } |
| 792 | |
| 793 | static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map) |
| 794 | { |
| 795 | struct usbhs_pipe *pipe = pkt->pipe; |
| 796 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 797 | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); |
| 798 | struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); |
| 799 | struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); |
| 800 | |
| 801 | return info->dma_map_ctrl(chan->device->dev, pkt, map); |
| 802 | } |
| 803 | |
| 804 | static void usbhsf_dma_complete(void *arg); |
| 805 | static void xfer_work(struct work_struct *work) |
| 806 | { |
| 807 | struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); |
| 808 | struct usbhs_pipe *pipe = pkt->pipe; |
| 809 | struct usbhs_fifo *fifo; |
| 810 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 811 | struct dma_async_tx_descriptor *desc; |
| 812 | struct dma_chan *chan; |
| 813 | struct device *dev = usbhs_priv_to_dev(priv); |
| 814 | enum dma_transfer_direction dir; |
| 815 | unsigned long flags; |
| 816 | |
| 817 | usbhs_lock(priv, flags); |
| 818 | fifo = usbhs_pipe_to_fifo(pipe); |
| 819 | if (!fifo) |
| 820 | goto xfer_work_end; |
| 821 | |
| 822 | chan = usbhsf_dma_chan_get(fifo, pkt); |
| 823 | dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; |
| 824 | |
| 825 | desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual, |
| 826 | pkt->trans, dir, |
| 827 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| 828 | if (!desc) |
| 829 | goto xfer_work_end; |
| 830 | |
| 831 | desc->callback = usbhsf_dma_complete; |
| 832 | desc->callback_param = pipe; |
| 833 | |
| 834 | pkt->cookie = dmaengine_submit(desc); |
| 835 | if (pkt->cookie < 0) { |
| 836 | dev_err(dev, "Failed to submit dma descriptor\n"); |
| 837 | goto xfer_work_end; |
| 838 | } |
| 839 | |
| 840 | dev_dbg(dev, " %s %d (%d/ %d)\n", |
| 841 | fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); |
| 842 | |
| 843 | usbhs_pipe_running(pipe, 1); |
| 844 | usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); |
| 845 | dma_async_issue_pending(chan); |
| 846 | usbhsf_dma_start(pipe, fifo); |
| 847 | usbhs_pipe_enable(pipe); |
| 848 | |
| 849 | xfer_work_end: |
| 850 | usbhs_unlock(priv, flags); |
| 851 | } |
| 852 | |
| 853 | /* |
| 854 | * DMA push handler |
| 855 | */ |
| 856 | static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) |
| 857 | { |
| 858 | struct usbhs_pipe *pipe = pkt->pipe; |
| 859 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 860 | struct usbhs_fifo *fifo; |
| 861 | int len = pkt->length - pkt->actual; |
| 862 | int ret; |
| 863 | uintptr_t align_mask; |
| 864 | |
| 865 | if (usbhs_pipe_is_busy(pipe)) |
| 866 | return 0; |
| 867 | |
| 868 | /* use PIO if packet is less than pio_dma_border or pipe is DCP */ |
| 869 | if ((len < usbhs_get_dparam(priv, pio_dma_border)) || |
| 870 | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) |
| 871 | goto usbhsf_pio_prepare_push; |
| 872 | |
| 873 | /* check data length if this driver don't use USB-DMAC */ |
| 874 | if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7) |
| 875 | goto usbhsf_pio_prepare_push; |
| 876 | |
| 877 | /* check buffer alignment */ |
| 878 | align_mask = usbhs_get_dparam(priv, has_usb_dmac) ? |
| 879 | USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7; |
| 880 | if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask) |
| 881 | goto usbhsf_pio_prepare_push; |
| 882 | |
| 883 | /* return at this time if the pipe is running */ |
| 884 | if (usbhs_pipe_is_running(pipe)) |
| 885 | return 0; |
| 886 | |
| 887 | /* get enable DMA fifo */ |
| 888 | fifo = usbhsf_get_dma_fifo(priv, pkt); |
| 889 | if (!fifo) |
| 890 | goto usbhsf_pio_prepare_push; |
| 891 | |
| 892 | ret = usbhsf_fifo_select(pipe, fifo, 0); |
| 893 | if (ret < 0) |
| 894 | goto usbhsf_pio_prepare_push; |
| 895 | |
| 896 | if (usbhsf_dma_map(pkt) < 0) |
| 897 | goto usbhsf_pio_prepare_push_unselect; |
| 898 | |
| 899 | pkt->trans = len; |
| 900 | |
| 901 | usbhsf_tx_irq_ctrl(pipe, 0); |
| 902 | INIT_WORK(&pkt->work, xfer_work); |
| 903 | schedule_work(&pkt->work); |
| 904 | |
| 905 | return 0; |
| 906 | |
| 907 | usbhsf_pio_prepare_push_unselect: |
| 908 | usbhsf_fifo_unselect(pipe, fifo); |
| 909 | usbhsf_pio_prepare_push: |
| 910 | /* |
| 911 | * change handler to PIO |
| 912 | */ |
| 913 | pkt->handler = &usbhs_fifo_pio_push_handler; |
| 914 | |
| 915 | return pkt->handler->prepare(pkt, is_done); |
| 916 | } |
| 917 | |
| 918 | static int usbhsf_dma_push_done(struct usbhs_pkt *pkt, int *is_done) |
| 919 | { |
| 920 | struct usbhs_pipe *pipe = pkt->pipe; |
| 921 | int is_short = pkt->trans % usbhs_pipe_get_maxpacket(pipe); |
| 922 | |
| 923 | pkt->actual += pkt->trans; |
| 924 | |
| 925 | if (pkt->actual < pkt->length) |
| 926 | *is_done = 0; /* there are remainder data */ |
| 927 | else if (is_short) |
| 928 | *is_done = 1; /* short packet */ |
| 929 | else |
| 930 | *is_done = !pkt->zero; /* send zero packet? */ |
| 931 | |
| 932 | usbhs_pipe_running(pipe, !*is_done); |
| 933 | |
| 934 | usbhsf_dma_stop(pipe, pipe->fifo); |
| 935 | usbhsf_dma_unmap(pkt); |
| 936 | usbhsf_fifo_unselect(pipe, pipe->fifo); |
| 937 | |
| 938 | if (!*is_done) { |
| 939 | /* change handler to PIO */ |
| 940 | pkt->handler = &usbhs_fifo_pio_push_handler; |
| 941 | return pkt->handler->try_run(pkt, is_done); |
| 942 | } |
| 943 | |
| 944 | return 0; |
| 945 | } |
| 946 | |
| 947 | const struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = { |
| 948 | .prepare = usbhsf_dma_prepare_push, |
| 949 | .dma_done = usbhsf_dma_push_done, |
| 950 | }; |
| 951 | |
| 952 | /* |
| 953 | * DMA pop handler |
| 954 | */ |
| 955 | |
| 956 | static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt, |
| 957 | int *is_done) |
| 958 | { |
| 959 | return usbhsf_prepare_pop(pkt, is_done); |
| 960 | } |
| 961 | |
| 962 | static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, |
| 963 | int *is_done) |
| 964 | { |
| 965 | struct usbhs_pipe *pipe = pkt->pipe; |
| 966 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 967 | struct usbhs_fifo *fifo; |
| 968 | int ret; |
| 969 | |
| 970 | if (usbhs_pipe_is_busy(pipe)) |
| 971 | return 0; |
| 972 | |
| 973 | /* use PIO if packet is less than pio_dma_border or pipe is DCP */ |
| 974 | if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || |
| 975 | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) |
| 976 | goto usbhsf_pio_prepare_pop; |
| 977 | |
| 978 | fifo = usbhsf_get_dma_fifo(priv, pkt); |
| 979 | if (!fifo) |
| 980 | goto usbhsf_pio_prepare_pop; |
| 981 | |
| 982 | if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1)) |
| 983 | goto usbhsf_pio_prepare_pop; |
| 984 | |
| 985 | /* return at this time if the pipe is running */ |
| 986 | if (usbhs_pipe_is_running(pipe)) |
| 987 | return 0; |
| 988 | |
| 989 | usbhs_pipe_config_change_bfre(pipe, 1); |
| 990 | |
| 991 | ret = usbhsf_fifo_select(pipe, fifo, 0); |
| 992 | if (ret < 0) |
| 993 | goto usbhsf_pio_prepare_pop; |
| 994 | |
| 995 | if (usbhsf_dma_map(pkt) < 0) |
| 996 | goto usbhsf_pio_prepare_pop_unselect; |
| 997 | |
| 998 | /* DMA */ |
| 999 | |
| 1000 | /* |
| 1001 | * usbhs_fifo_dma_pop_handler :: prepare |
| 1002 | * enabled irq to come here. |
| 1003 | * but it is no longer needed for DMA. disable it. |
| 1004 | */ |
| 1005 | usbhsf_rx_irq_ctrl(pipe, 0); |
| 1006 | |
| 1007 | pkt->trans = pkt->length; |
| 1008 | |
| 1009 | INIT_WORK(&pkt->work, xfer_work); |
| 1010 | schedule_work(&pkt->work); |
| 1011 | |
| 1012 | return 0; |
| 1013 | |
| 1014 | usbhsf_pio_prepare_pop_unselect: |
| 1015 | usbhsf_fifo_unselect(pipe, fifo); |
| 1016 | usbhsf_pio_prepare_pop: |
| 1017 | |
| 1018 | /* |
| 1019 | * change handler to PIO |
| 1020 | */ |
| 1021 | pkt->handler = &usbhs_fifo_pio_pop_handler; |
| 1022 | usbhs_pipe_config_change_bfre(pipe, 0); |
| 1023 | |
| 1024 | return pkt->handler->prepare(pkt, is_done); |
| 1025 | } |
| 1026 | |
| 1027 | static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done) |
| 1028 | { |
| 1029 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); |
| 1030 | |
| 1031 | if (usbhs_get_dparam(priv, has_usb_dmac)) |
| 1032 | return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done); |
| 1033 | else |
| 1034 | return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done); |
| 1035 | } |
| 1036 | |
| 1037 | static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) |
| 1038 | { |
| 1039 | struct usbhs_pipe *pipe = pkt->pipe; |
| 1040 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 1041 | struct usbhs_fifo *fifo; |
| 1042 | int len, ret; |
| 1043 | |
| 1044 | if (usbhs_pipe_is_busy(pipe)) |
| 1045 | return 0; |
| 1046 | |
| 1047 | if (usbhs_pipe_is_dcp(pipe)) |
| 1048 | goto usbhsf_pio_prepare_pop; |
| 1049 | |
| 1050 | /* get enable DMA fifo */ |
| 1051 | fifo = usbhsf_get_dma_fifo(priv, pkt); |
| 1052 | if (!fifo) |
| 1053 | goto usbhsf_pio_prepare_pop; |
| 1054 | |
| 1055 | if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ |
| 1056 | goto usbhsf_pio_prepare_pop; |
| 1057 | |
| 1058 | ret = usbhsf_fifo_select(pipe, fifo, 0); |
| 1059 | if (ret < 0) |
| 1060 | goto usbhsf_pio_prepare_pop; |
| 1061 | |
| 1062 | /* use PIO if packet is less than pio_dma_border */ |
| 1063 | len = usbhsf_fifo_rcv_len(priv, fifo); |
| 1064 | len = min(pkt->length - pkt->actual, len); |
| 1065 | if (len & 0x7) /* 8byte alignment */ |
| 1066 | goto usbhsf_pio_prepare_pop_unselect; |
| 1067 | |
| 1068 | if (len < usbhs_get_dparam(priv, pio_dma_border)) |
| 1069 | goto usbhsf_pio_prepare_pop_unselect; |
| 1070 | |
| 1071 | ret = usbhsf_fifo_barrier(priv, fifo); |
| 1072 | if (ret < 0) |
| 1073 | goto usbhsf_pio_prepare_pop_unselect; |
| 1074 | |
| 1075 | if (usbhsf_dma_map(pkt) < 0) |
| 1076 | goto usbhsf_pio_prepare_pop_unselect; |
| 1077 | |
| 1078 | /* DMA */ |
| 1079 | |
| 1080 | /* |
| 1081 | * usbhs_fifo_dma_pop_handler :: prepare |
| 1082 | * enabled irq to come here. |
| 1083 | * but it is no longer needed for DMA. disable it. |
| 1084 | */ |
| 1085 | usbhsf_rx_irq_ctrl(pipe, 0); |
| 1086 | |
| 1087 | pkt->trans = len; |
| 1088 | |
| 1089 | INIT_WORK(&pkt->work, xfer_work); |
| 1090 | schedule_work(&pkt->work); |
| 1091 | |
| 1092 | return 0; |
| 1093 | |
| 1094 | usbhsf_pio_prepare_pop_unselect: |
| 1095 | usbhsf_fifo_unselect(pipe, fifo); |
| 1096 | usbhsf_pio_prepare_pop: |
| 1097 | |
| 1098 | /* |
| 1099 | * change handler to PIO |
| 1100 | */ |
| 1101 | pkt->handler = &usbhs_fifo_pio_pop_handler; |
| 1102 | |
| 1103 | return pkt->handler->try_run(pkt, is_done); |
| 1104 | } |
| 1105 | |
| 1106 | static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) |
| 1107 | { |
| 1108 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); |
| 1109 | |
| 1110 | BUG_ON(usbhs_get_dparam(priv, has_usb_dmac)); |
| 1111 | |
| 1112 | return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done); |
| 1113 | } |
| 1114 | |
| 1115 | static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) |
| 1116 | { |
| 1117 | struct usbhs_pipe *pipe = pkt->pipe; |
| 1118 | int maxp = usbhs_pipe_get_maxpacket(pipe); |
| 1119 | |
| 1120 | usbhsf_dma_stop(pipe, pipe->fifo); |
| 1121 | usbhsf_dma_unmap(pkt); |
| 1122 | usbhsf_fifo_unselect(pipe, pipe->fifo); |
| 1123 | |
| 1124 | pkt->actual += pkt->trans; |
| 1125 | |
| 1126 | if ((pkt->actual == pkt->length) || /* receive all data */ |
| 1127 | (pkt->trans < maxp)) { /* short packet */ |
| 1128 | *is_done = 1; |
| 1129 | usbhs_pipe_running(pipe, 0); |
| 1130 | } else { |
| 1131 | /* re-enable */ |
| 1132 | usbhs_pipe_running(pipe, 0); |
| 1133 | usbhsf_prepare_pop(pkt, is_done); |
| 1134 | } |
| 1135 | |
| 1136 | return 0; |
| 1137 | } |
| 1138 | |
| 1139 | static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt, |
| 1140 | struct dma_chan *chan, int dtln) |
| 1141 | { |
| 1142 | struct usbhs_pipe *pipe = pkt->pipe; |
| 1143 | struct dma_tx_state state; |
| 1144 | size_t received_size; |
| 1145 | int maxp = usbhs_pipe_get_maxpacket(pipe); |
| 1146 | |
| 1147 | dmaengine_tx_status(chan, pkt->cookie, &state); |
| 1148 | received_size = pkt->length - state.residue; |
| 1149 | |
| 1150 | if (dtln) { |
| 1151 | received_size -= USBHS_USB_DMAC_XFER_SIZE; |
| 1152 | received_size &= ~(maxp - 1); |
| 1153 | received_size += dtln; |
| 1154 | } |
| 1155 | |
| 1156 | return received_size; |
| 1157 | } |
| 1158 | |
| 1159 | static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt, |
| 1160 | int *is_done) |
| 1161 | { |
| 1162 | struct usbhs_pipe *pipe = pkt->pipe; |
| 1163 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 1164 | struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); |
| 1165 | struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); |
| 1166 | int rcv_len; |
| 1167 | |
| 1168 | /* |
| 1169 | * Since the driver disables rx_irq in DMA mode, the interrupt handler |
| 1170 | * cannot the BRDYSTS. So, the function clears it here because the |
| 1171 | * driver may use PIO mode next time. |
| 1172 | */ |
| 1173 | usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe)); |
| 1174 | |
| 1175 | rcv_len = usbhsf_fifo_rcv_len(priv, fifo); |
| 1176 | usbhsf_fifo_clear(pipe, fifo); |
| 1177 | pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len); |
| 1178 | |
| 1179 | usbhs_pipe_running(pipe, 0); |
| 1180 | usbhsf_dma_stop(pipe, fifo); |
| 1181 | usbhsf_dma_unmap(pkt); |
| 1182 | usbhsf_fifo_unselect(pipe, pipe->fifo); |
| 1183 | |
| 1184 | /* The driver can assume the rx transaction is always "done" */ |
| 1185 | *is_done = 1; |
| 1186 | |
| 1187 | return 0; |
| 1188 | } |
| 1189 | |
| 1190 | static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) |
| 1191 | { |
| 1192 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); |
| 1193 | |
| 1194 | if (usbhs_get_dparam(priv, has_usb_dmac)) |
| 1195 | return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done); |
| 1196 | else |
| 1197 | return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done); |
| 1198 | } |
| 1199 | |
| 1200 | const struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = { |
| 1201 | .prepare = usbhsf_dma_prepare_pop, |
| 1202 | .try_run = usbhsf_dma_try_pop, |
| 1203 | .dma_done = usbhsf_dma_pop_done |
| 1204 | }; |
| 1205 | |
| 1206 | /* |
| 1207 | * DMA setting |
| 1208 | */ |
| 1209 | static bool usbhsf_dma_filter(struct dma_chan *chan, void *param) |
| 1210 | { |
| 1211 | struct sh_dmae_slave *slave = param; |
| 1212 | |
| 1213 | /* |
| 1214 | * FIXME |
| 1215 | * |
| 1216 | * usbhs doesn't recognize id = 0 as valid DMA |
| 1217 | */ |
| 1218 | if (0 == slave->shdma_slave.slave_id) |
| 1219 | return false; |
| 1220 | |
| 1221 | chan->private = slave; |
| 1222 | |
| 1223 | return true; |
| 1224 | } |
| 1225 | |
| 1226 | static void usbhsf_dma_quit(struct usbhs_priv *priv, struct usbhs_fifo *fifo) |
| 1227 | { |
| 1228 | if (fifo->tx_chan) |
| 1229 | dma_release_channel(fifo->tx_chan); |
| 1230 | if (fifo->rx_chan) |
| 1231 | dma_release_channel(fifo->rx_chan); |
| 1232 | |
| 1233 | fifo->tx_chan = NULL; |
| 1234 | fifo->rx_chan = NULL; |
| 1235 | } |
| 1236 | |
| 1237 | static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo) |
| 1238 | { |
| 1239 | dma_cap_mask_t mask; |
| 1240 | |
| 1241 | dma_cap_zero(mask); |
| 1242 | dma_cap_set(DMA_SLAVE, mask); |
| 1243 | fifo->tx_chan = dma_request_channel(mask, usbhsf_dma_filter, |
| 1244 | &fifo->tx_slave); |
| 1245 | |
| 1246 | dma_cap_zero(mask); |
| 1247 | dma_cap_set(DMA_SLAVE, mask); |
| 1248 | fifo->rx_chan = dma_request_channel(mask, usbhsf_dma_filter, |
| 1249 | &fifo->rx_slave); |
| 1250 | } |
| 1251 | |
| 1252 | static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo, |
| 1253 | int channel) |
| 1254 | { |
| 1255 | char name[16]; |
| 1256 | |
| 1257 | /* |
| 1258 | * To avoid complex handing for DnFIFOs, the driver uses each |
| 1259 | * DnFIFO as TX or RX direction (not bi-direction). |
| 1260 | * So, the driver uses odd channels for TX, even channels for RX. |
| 1261 | */ |
| 1262 | snprintf(name, sizeof(name), "ch%d", channel); |
| 1263 | if (channel & 1) { |
| 1264 | fifo->tx_chan = dma_request_slave_channel_reason(dev, name); |
| 1265 | if (IS_ERR(fifo->tx_chan)) |
| 1266 | fifo->tx_chan = NULL; |
| 1267 | } else { |
| 1268 | fifo->rx_chan = dma_request_slave_channel_reason(dev, name); |
| 1269 | if (IS_ERR(fifo->rx_chan)) |
| 1270 | fifo->rx_chan = NULL; |
| 1271 | } |
| 1272 | } |
| 1273 | |
| 1274 | static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, |
| 1275 | int channel) |
| 1276 | { |
| 1277 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1278 | |
| 1279 | if (dev->of_node) |
| 1280 | usbhsf_dma_init_dt(dev, fifo, channel); |
| 1281 | else |
| 1282 | usbhsf_dma_init_pdev(fifo); |
| 1283 | |
| 1284 | if (fifo->tx_chan || fifo->rx_chan) |
| 1285 | dev_dbg(dev, "enable DMAEngine (%s%s%s)\n", |
| 1286 | fifo->name, |
| 1287 | fifo->tx_chan ? "[TX]" : " ", |
| 1288 | fifo->rx_chan ? "[RX]" : " "); |
| 1289 | } |
| 1290 | |
| 1291 | /* |
| 1292 | * irq functions |
| 1293 | */ |
| 1294 | static int usbhsf_irq_empty(struct usbhs_priv *priv, |
| 1295 | struct usbhs_irq_state *irq_state) |
| 1296 | { |
| 1297 | struct usbhs_pipe *pipe; |
| 1298 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1299 | int i, ret; |
| 1300 | |
| 1301 | if (!irq_state->bempsts) { |
| 1302 | dev_err(dev, "debug %s !!\n", __func__); |
| 1303 | return -EIO; |
| 1304 | } |
| 1305 | |
| 1306 | dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts); |
| 1307 | |
| 1308 | /* |
| 1309 | * search interrupted "pipe" |
| 1310 | * not "uep". |
| 1311 | */ |
| 1312 | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| 1313 | if (!(irq_state->bempsts & (1 << i))) |
| 1314 | continue; |
| 1315 | |
| 1316 | ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); |
| 1317 | if (ret < 0) |
| 1318 | dev_err(dev, "irq_empty run_error %d : %d\n", i, ret); |
| 1319 | } |
| 1320 | |
| 1321 | return 0; |
| 1322 | } |
| 1323 | |
| 1324 | static int usbhsf_irq_ready(struct usbhs_priv *priv, |
| 1325 | struct usbhs_irq_state *irq_state) |
| 1326 | { |
| 1327 | struct usbhs_pipe *pipe; |
| 1328 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1329 | int i, ret; |
| 1330 | |
| 1331 | if (!irq_state->brdysts) { |
| 1332 | dev_err(dev, "debug %s !!\n", __func__); |
| 1333 | return -EIO; |
| 1334 | } |
| 1335 | |
| 1336 | dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts); |
| 1337 | |
| 1338 | /* |
| 1339 | * search interrupted "pipe" |
| 1340 | * not "uep". |
| 1341 | */ |
| 1342 | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| 1343 | if (!(irq_state->brdysts & (1 << i))) |
| 1344 | continue; |
| 1345 | |
| 1346 | ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); |
| 1347 | if (ret < 0) |
| 1348 | dev_err(dev, "irq_ready run_error %d : %d\n", i, ret); |
| 1349 | } |
| 1350 | |
| 1351 | return 0; |
| 1352 | } |
| 1353 | |
| 1354 | static void usbhsf_dma_complete(void *arg) |
| 1355 | { |
| 1356 | struct usbhs_pipe *pipe = arg; |
| 1357 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 1358 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1359 | int ret; |
| 1360 | |
| 1361 | ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE); |
| 1362 | if (ret < 0) |
| 1363 | dev_err(dev, "dma_complete run_error %d : %d\n", |
| 1364 | usbhs_pipe_number(pipe), ret); |
| 1365 | } |
| 1366 | |
| 1367 | void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe) |
| 1368 | { |
| 1369 | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| 1370 | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ |
| 1371 | |
| 1372 | /* clear DCP FIFO of transmission */ |
| 1373 | if (usbhsf_fifo_select(pipe, fifo, 1) < 0) |
| 1374 | return; |
| 1375 | usbhsf_fifo_clear(pipe, fifo); |
| 1376 | usbhsf_fifo_unselect(pipe, fifo); |
| 1377 | |
| 1378 | /* clear DCP FIFO of reception */ |
| 1379 | if (usbhsf_fifo_select(pipe, fifo, 0) < 0) |
| 1380 | return; |
| 1381 | usbhsf_fifo_clear(pipe, fifo); |
| 1382 | usbhsf_fifo_unselect(pipe, fifo); |
| 1383 | } |
| 1384 | |
| 1385 | /* |
| 1386 | * fifo init |
| 1387 | */ |
| 1388 | void usbhs_fifo_init(struct usbhs_priv *priv) |
| 1389 | { |
| 1390 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| 1391 | struct usbhs_fifo *cfifo = usbhsf_get_cfifo(priv); |
| 1392 | struct usbhs_fifo *dfifo; |
| 1393 | int i; |
| 1394 | |
| 1395 | mod->irq_empty = usbhsf_irq_empty; |
| 1396 | mod->irq_ready = usbhsf_irq_ready; |
| 1397 | mod->irq_bempsts = 0; |
| 1398 | mod->irq_brdysts = 0; |
| 1399 | |
| 1400 | cfifo->pipe = NULL; |
| 1401 | usbhs_for_each_dfifo(priv, dfifo, i) |
| 1402 | dfifo->pipe = NULL; |
| 1403 | } |
| 1404 | |
| 1405 | void usbhs_fifo_quit(struct usbhs_priv *priv) |
| 1406 | { |
| 1407 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| 1408 | |
| 1409 | mod->irq_empty = NULL; |
| 1410 | mod->irq_ready = NULL; |
| 1411 | mod->irq_bempsts = 0; |
| 1412 | mod->irq_brdysts = 0; |
| 1413 | } |
| 1414 | |
| 1415 | #define __USBHS_DFIFO_INIT(priv, fifo, channel, fifo_port) \ |
| 1416 | do { \ |
| 1417 | fifo = usbhsf_get_dnfifo(priv, channel); \ |
| 1418 | fifo->name = "D"#channel"FIFO"; \ |
| 1419 | fifo->port = fifo_port; \ |
| 1420 | fifo->sel = D##channel##FIFOSEL; \ |
| 1421 | fifo->ctr = D##channel##FIFOCTR; \ |
| 1422 | fifo->tx_slave.shdma_slave.slave_id = \ |
| 1423 | usbhs_get_dparam(priv, d##channel##_tx_id); \ |
| 1424 | fifo->rx_slave.shdma_slave.slave_id = \ |
| 1425 | usbhs_get_dparam(priv, d##channel##_rx_id); \ |
| 1426 | usbhsf_dma_init(priv, fifo, channel); \ |
| 1427 | } while (0) |
| 1428 | |
| 1429 | #define USBHS_DFIFO_INIT(priv, fifo, channel) \ |
| 1430 | __USBHS_DFIFO_INIT(priv, fifo, channel, D##channel##FIFO) |
| 1431 | #define USBHS_DFIFO_INIT_NO_PORT(priv, fifo, channel) \ |
| 1432 | __USBHS_DFIFO_INIT(priv, fifo, channel, 0) |
| 1433 | |
| 1434 | int usbhs_fifo_probe(struct usbhs_priv *priv) |
| 1435 | { |
| 1436 | struct usbhs_fifo *fifo; |
| 1437 | |
| 1438 | /* CFIFO */ |
| 1439 | fifo = usbhsf_get_cfifo(priv); |
| 1440 | fifo->name = "CFIFO"; |
| 1441 | fifo->port = CFIFO; |
| 1442 | fifo->sel = CFIFOSEL; |
| 1443 | fifo->ctr = CFIFOCTR; |
| 1444 | |
| 1445 | /* DFIFO */ |
| 1446 | USBHS_DFIFO_INIT(priv, fifo, 0); |
| 1447 | USBHS_DFIFO_INIT(priv, fifo, 1); |
| 1448 | USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 2); |
| 1449 | USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 3); |
| 1450 | |
| 1451 | return 0; |
| 1452 | } |
| 1453 | |
| 1454 | void usbhs_fifo_remove(struct usbhs_priv *priv) |
| 1455 | { |
| 1456 | struct usbhs_fifo *fifo; |
| 1457 | int i; |
| 1458 | |
| 1459 | usbhs_for_each_dfifo(priv, fifo, i) |
| 1460 | usbhsf_dma_quit(priv, fifo); |
| 1461 | } |