Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame^] | 1 | # SPDX-License-Identifier: GPL-2.0 |
| 2 | menu "Board support" |
| 3 | |
| 4 | config SOLUTION_ENGINE |
| 5 | bool |
| 6 | |
| 7 | config SH_ALPHA_BOARD |
| 8 | bool |
| 9 | |
| 10 | config SH_DEVICE_TREE |
| 11 | bool "Board Described by Device Tree" |
| 12 | select OF |
| 13 | select OF_EARLY_FLATTREE |
| 14 | select TIMER_OF |
| 15 | select COMMON_CLK |
| 16 | select GENERIC_CALIBRATE_DELAY |
| 17 | help |
| 18 | Select Board Described by Device Tree to build a kernel that |
| 19 | does not hard-code any board-specific knowledge but instead uses |
| 20 | a device tree blob provided by the boot-loader. You must enable |
| 21 | drivers for any hardware you want to use separately. At this |
| 22 | time, only boards based on the open-hardware J-Core processors |
| 23 | have sufficient driver coverage to use this option; do not |
| 24 | select it if you are using original SuperH hardware. |
| 25 | |
| 26 | config SH_JCORE_SOC |
| 27 | bool "J-Core SoC" |
| 28 | depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2) |
| 29 | select CLKSRC_JCORE_PIT |
| 30 | select JCORE_AIC |
| 31 | default y if CPU_J2 |
| 32 | help |
| 33 | Select this option to include drivers core components of the |
| 34 | J-Core SoC, including interrupt controllers and timers. |
| 35 | |
| 36 | config SH_SOLUTION_ENGINE |
| 37 | bool "SolutionEngine" |
| 38 | select SOLUTION_ENGINE |
| 39 | select CPU_HAS_IPR_IRQ |
| 40 | depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ |
| 41 | CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ |
| 42 | CPU_SUBTYPE_SH7750R |
| 43 | help |
| 44 | Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, |
| 45 | SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. |
| 46 | |
| 47 | config SH_7206_SOLUTION_ENGINE |
| 48 | bool "SolutionEngine7206" |
| 49 | select SOLUTION_ENGINE |
| 50 | depends on CPU_SUBTYPE_SH7206 |
| 51 | help |
| 52 | Select 7206 SolutionEngine if configuring for a Hitachi SH7206 |
| 53 | evaluation board. |
| 54 | |
| 55 | config SH_7619_SOLUTION_ENGINE |
| 56 | bool "SolutionEngine7619" |
| 57 | select SOLUTION_ENGINE |
| 58 | depends on CPU_SUBTYPE_SH7619 |
| 59 | help |
| 60 | Select 7619 SolutionEngine if configuring for a Hitachi SH7619 |
| 61 | evaluation board. |
| 62 | |
| 63 | config SH_7721_SOLUTION_ENGINE |
| 64 | bool "SolutionEngine7721" |
| 65 | select SOLUTION_ENGINE |
| 66 | depends on CPU_SUBTYPE_SH7721 |
| 67 | help |
| 68 | Select 7721 SolutionEngine if configuring for a Hitachi SH7721 |
| 69 | evaluation board. |
| 70 | |
| 71 | config SH_7722_SOLUTION_ENGINE |
| 72 | bool "SolutionEngine7722" |
| 73 | select SOLUTION_ENGINE |
| 74 | select GENERIC_IRQ_CHIP |
| 75 | select IRQ_DOMAIN |
| 76 | depends on CPU_SUBTYPE_SH7722 |
| 77 | help |
| 78 | Select 7722 SolutionEngine if configuring for a Hitachi SH772 |
| 79 | evaluation board. |
| 80 | |
| 81 | config SH_7724_SOLUTION_ENGINE |
| 82 | bool "SolutionEngine7724" |
| 83 | select SOLUTION_ENGINE |
| 84 | depends on CPU_SUBTYPE_SH7724 |
| 85 | select GPIOLIB |
| 86 | select SND_SOC_AK4642 if SND_SIMPLE_CARD |
| 87 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 88 | help |
| 89 | Select 7724 SolutionEngine if configuring for a Hitachi SH7724 |
| 90 | evaluation board. |
| 91 | |
| 92 | config SH_7751_SOLUTION_ENGINE |
| 93 | bool "SolutionEngine7751" |
| 94 | select SOLUTION_ENGINE |
| 95 | select CPU_HAS_IPR_IRQ |
| 96 | depends on CPU_SUBTYPE_SH7751 |
| 97 | help |
| 98 | Select 7751 SolutionEngine if configuring for a Hitachi SH7751 |
| 99 | evaluation board. |
| 100 | |
| 101 | config SH_7780_SOLUTION_ENGINE |
| 102 | bool "SolutionEngine7780" |
| 103 | select SOLUTION_ENGINE |
| 104 | select SYS_SUPPORTS_PCI |
| 105 | depends on CPU_SUBTYPE_SH7780 |
| 106 | help |
| 107 | Select 7780 SolutionEngine if configuring for a Renesas SH7780 |
| 108 | evaluation board. |
| 109 | |
| 110 | config SH_7343_SOLUTION_ENGINE |
| 111 | bool "SolutionEngine7343" |
| 112 | select SOLUTION_ENGINE |
| 113 | select GENERIC_IRQ_CHIP |
| 114 | select IRQ_DOMAIN |
| 115 | depends on CPU_SUBTYPE_SH7343 |
| 116 | help |
| 117 | Select 7343 SolutionEngine if configuring for a Hitachi |
| 118 | SH7343 (SH-Mobile 3AS) evaluation board. |
| 119 | |
| 120 | config SH_HP6XX |
| 121 | bool "HP6XX" |
| 122 | select SYS_SUPPORTS_APM_EMULATION |
| 123 | select HD6446X_SERIES |
| 124 | depends on CPU_SUBTYPE_SH7709 |
| 125 | help |
| 126 | Select HP6XX if configuring for a HP jornada HP6xx. |
| 127 | More information (hardware only) at |
| 128 | <http://www.hp.com/jornada/>. |
| 129 | |
| 130 | config SH_DREAMCAST |
| 131 | bool "Dreamcast" |
| 132 | select SYS_SUPPORTS_PCI |
| 133 | depends on CPU_SUBTYPE_SH7091 |
| 134 | help |
| 135 | Select Dreamcast if configuring for a SEGA Dreamcast. |
| 136 | More information at <http://www.linux-sh.org> |
| 137 | |
| 138 | config SH_SH03 |
| 139 | bool "Interface CTP/PCI-SH03" |
| 140 | depends on CPU_SUBTYPE_SH7751 |
| 141 | select CPU_HAS_IPR_IRQ |
| 142 | select SYS_SUPPORTS_PCI |
| 143 | help |
| 144 | CTP/PCI-SH03 is a CPU module computer that is produced |
| 145 | by Interface Corporation. |
| 146 | More information at <http://www.interface.co.jp> |
| 147 | |
| 148 | config SH_SECUREEDGE5410 |
| 149 | bool "SecureEdge5410" |
| 150 | depends on CPU_SUBTYPE_SH7751R |
| 151 | select CPU_HAS_IPR_IRQ |
| 152 | select SYS_SUPPORTS_PCI |
| 153 | help |
| 154 | Select SecureEdge5410 if configuring for a SnapGear SH board. |
| 155 | This includes both the OEM SecureEdge products as well as the |
| 156 | SME product line. |
| 157 | |
| 158 | config SH_RTS7751R2D |
| 159 | bool "RTS7751R2D" |
| 160 | depends on CPU_SUBTYPE_SH7751R |
| 161 | select SYS_SUPPORTS_PCI |
| 162 | select IO_TRAPPED if MMU |
| 163 | help |
| 164 | Select RTS7751R2D if configuring for a Renesas Technology |
| 165 | Sales SH-Graphics board. |
| 166 | |
| 167 | config SH_RSK |
| 168 | bool "Renesas Starter Kit" |
| 169 | depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ |
| 170 | CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 |
| 171 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 172 | help |
| 173 | Select this option if configuring for any of the RSK+ MCU |
| 174 | evaluation platforms. |
| 175 | |
| 176 | config SH_SDK7780 |
| 177 | bool "SDK7780R3" |
| 178 | depends on CPU_SUBTYPE_SH7780 |
| 179 | select SYS_SUPPORTS_PCI |
| 180 | help |
| 181 | Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 |
| 182 | evaluation board. |
| 183 | |
| 184 | config SH_SDK7786 |
| 185 | bool "SDK7786" |
| 186 | depends on CPU_SUBTYPE_SH7786 |
| 187 | select SYS_SUPPORTS_PCI |
| 188 | select NO_IOPORT_MAP if !PCI |
| 189 | select HAVE_SRAM_POOL |
| 190 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 191 | help |
| 192 | Select SDK7786 if configuring for a Renesas Technology Europe |
| 193 | SH7786-65nm board. |
| 194 | |
| 195 | config SH_HIGHLANDER |
| 196 | bool "Highlander" |
| 197 | depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 |
| 198 | select SYS_SUPPORTS_PCI |
| 199 | select IO_TRAPPED if MMU |
| 200 | |
| 201 | config SH_SH7757LCR |
| 202 | bool "SH7757LCR" |
| 203 | depends on CPU_SUBTYPE_SH7757 |
| 204 | select GPIOLIB |
| 205 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 206 | |
| 207 | config SH_SH7785LCR |
| 208 | bool "SH7785LCR" |
| 209 | depends on CPU_SUBTYPE_SH7785 |
| 210 | select SYS_SUPPORTS_PCI |
| 211 | |
| 212 | config SH_SH7785LCR_29BIT_PHYSMAPS |
| 213 | bool "SH7785LCR 29bit physmaps" |
| 214 | depends on SH_SH7785LCR && 29BIT |
| 215 | default y |
| 216 | help |
| 217 | This board has 2 physical memory maps. It can be changed with |
| 218 | DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, |
| 219 | you can access all on-board device in 29bit address mode. |
| 220 | |
| 221 | config SH_SH7785LCR_PT |
| 222 | bool "SH7785LCR prototype board on 32-bit MMU mode" |
| 223 | depends on SH_SH7785LCR && 32BIT |
| 224 | default n |
| 225 | help |
| 226 | If you use prototype board, this option is enabled. |
| 227 | |
| 228 | config SH_URQUELL |
| 229 | bool "Urquell" |
| 230 | depends on CPU_SUBTYPE_SH7786 |
| 231 | select GPIOLIB |
| 232 | select SYS_SUPPORTS_PCI |
| 233 | select NO_IOPORT_MAP if !PCI |
| 234 | |
| 235 | config SH_MIGOR |
| 236 | bool "Migo-R" |
| 237 | depends on CPU_SUBTYPE_SH7722 |
| 238 | select GPIOLIB |
| 239 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 240 | help |
| 241 | Select Migo-R if configuring for the SH7722 Migo-R platform |
| 242 | by Renesas System Solutions Asia Pte. Ltd. |
| 243 | |
| 244 | config SH_AP325RXA |
| 245 | bool "AP-325RXA" |
| 246 | depends on CPU_SUBTYPE_SH7723 |
| 247 | select GPIOLIB |
| 248 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 249 | help |
| 250 | Renesas "AP-325RXA" support. |
| 251 | Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" |
| 252 | |
| 253 | config SH_KFR2R09 |
| 254 | bool "KFR2R09" |
| 255 | depends on CPU_SUBTYPE_SH7724 |
| 256 | select GPIOLIB |
| 257 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 258 | help |
| 259 | "Kit For R2R for 2009" support. |
| 260 | |
| 261 | config SH_ECOVEC |
| 262 | bool "EcoVec" |
| 263 | depends on CPU_SUBTYPE_SH7724 |
| 264 | select GPIOLIB |
| 265 | select SND_SOC_DA7210 if SND_SIMPLE_CARD |
| 266 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 267 | help |
| 268 | Renesas "R0P7724LC0011/21RL (EcoVec)" support. |
| 269 | |
| 270 | config SH_SH7763RDP |
| 271 | bool "SH7763RDP" |
| 272 | depends on CPU_SUBTYPE_SH7763 |
| 273 | help |
| 274 | Select SH7763RDP if configuring for a Renesas SH7763 |
| 275 | evaluation board. |
| 276 | |
| 277 | config SH_ESPT |
| 278 | bool "ESPT" |
| 279 | depends on CPU_SUBTYPE_SH7763 |
| 280 | help |
| 281 | Select ESPT if configuring for a Renesas SH7763 |
| 282 | with gigabit ether evaluation board. |
| 283 | |
| 284 | config SH_EDOSK7705 |
| 285 | bool "EDOSK7705" |
| 286 | depends on CPU_SUBTYPE_SH7705 |
| 287 | |
| 288 | config SH_EDOSK7760 |
| 289 | bool "EDOSK7760" |
| 290 | depends on CPU_SUBTYPE_SH7760 |
| 291 | help |
| 292 | Select if configuring for a Renesas EDOSK7760 |
| 293 | evaluation board. |
| 294 | |
| 295 | config SH_SH4202_MICRODEV |
| 296 | bool "SH4-202 MicroDev" |
| 297 | depends on CPU_SUBTYPE_SH4_202 |
| 298 | help |
| 299 | Select SH4-202 MicroDev if configuring for a SuperH MicroDev board |
| 300 | with an SH4-202 CPU. |
| 301 | |
| 302 | config SH_LANDISK |
| 303 | bool "LANDISK" |
| 304 | depends on CPU_SUBTYPE_SH7751R |
| 305 | select SYS_SUPPORTS_PCI |
| 306 | help |
| 307 | I-O DATA DEVICE, INC. "LANDISK Series" support. |
| 308 | |
| 309 | config SH_TITAN |
| 310 | bool "TITAN" |
| 311 | depends on CPU_SUBTYPE_SH7751R |
| 312 | select CPU_HAS_IPR_IRQ |
| 313 | select SYS_SUPPORTS_PCI |
| 314 | help |
| 315 | Select Titan if you are configuring for a Nimble Microsystems |
| 316 | NetEngine NP51R. |
| 317 | |
| 318 | config SH_SHMIN |
| 319 | bool "SHMIN" |
| 320 | depends on CPU_SUBTYPE_SH7706 |
| 321 | select CPU_HAS_IPR_IRQ |
| 322 | help |
| 323 | Select SHMIN if configuring for the SHMIN board. |
| 324 | |
| 325 | config SH_LBOX_RE2 |
| 326 | bool "L-BOX RE2" |
| 327 | depends on CPU_SUBTYPE_SH7751R |
| 328 | select SYS_SUPPORTS_PCI |
| 329 | help |
| 330 | Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. |
| 331 | |
| 332 | config SH_X3PROTO |
| 333 | bool "SH-X3 Prototype board" |
| 334 | depends on CPU_SUBTYPE_SHX3 |
| 335 | select NO_IOPORT_MAP if !PCI |
| 336 | select IRQ_DOMAIN |
| 337 | |
| 338 | config SH_MAGIC_PANEL_R2 |
| 339 | bool "Magic Panel R2" |
| 340 | depends on CPU_SUBTYPE_SH7720 |
| 341 | select GPIOLIB |
| 342 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 343 | help |
| 344 | Select Magic Panel R2 if configuring for Magic Panel R2. |
| 345 | |
| 346 | config SH_CAYMAN |
| 347 | bool "Hitachi Cayman" |
| 348 | depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 |
| 349 | select SYS_SUPPORTS_PCI |
| 350 | select ARCH_MIGHT_HAVE_PC_SERIO |
| 351 | |
| 352 | config SH_POLARIS |
| 353 | bool "SMSC Polaris" |
| 354 | select CPU_HAS_IPR_IRQ |
| 355 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 356 | depends on CPU_SUBTYPE_SH7709 |
| 357 | help |
| 358 | Select if configuring for an SMSC Polaris development board |
| 359 | |
| 360 | config SH_SH2007 |
| 361 | bool "SH-2007 board" |
| 362 | select NO_IOPORT_MAP |
| 363 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 364 | depends on CPU_SUBTYPE_SH7780 |
| 365 | help |
| 366 | SH-2007 is a single-board computer based around SH7780 chip |
| 367 | intended for embedded applications. |
| 368 | It has an Ethernet interface (SMC9118), direct connected |
| 369 | Compact Flash socket, two serial ports and PC-104 bus. |
| 370 | More information at <http://sh2000.sh-linux.org>. |
| 371 | |
| 372 | config SH_APSH4A3A |
| 373 | bool "AP-SH4A-3A" |
| 374 | select SH_ALPHA_BOARD |
| 375 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 376 | depends on CPU_SUBTYPE_SH7785 |
| 377 | help |
| 378 | Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. |
| 379 | |
| 380 | config SH_APSH4AD0A |
| 381 | bool "AP-SH4AD-0A" |
| 382 | select SH_ALPHA_BOARD |
| 383 | select SYS_SUPPORTS_PCI |
| 384 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| 385 | depends on CPU_SUBTYPE_SH7786 |
| 386 | help |
| 387 | Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. |
| 388 | |
| 389 | source "arch/sh/boards/mach-r2d/Kconfig" |
| 390 | source "arch/sh/boards/mach-highlander/Kconfig" |
| 391 | source "arch/sh/boards/mach-sdk7780/Kconfig" |
| 392 | source "arch/sh/boards/mach-migor/Kconfig" |
| 393 | source "arch/sh/boards/mach-rsk/Kconfig" |
| 394 | |
| 395 | if SH_MAGIC_PANEL_R2 |
| 396 | |
| 397 | menu "Magic Panel R2 options" |
| 398 | |
| 399 | config SH_MAGIC_PANEL_R2_VERSION |
| 400 | int "Magic Panel R2 Version" |
| 401 | default "3" |
| 402 | help |
| 403 | Set the version of the Magic Panel R2 |
| 404 | |
| 405 | endmenu |
| 406 | |
| 407 | endif |
| 408 | |
| 409 | endmenu |