David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * sky81452-backlight.c SKY81452 backlight driver |
| 4 | * |
| 5 | * Copyright 2014 Skyworks Solutions Inc. |
| 6 | * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 7 | */ |
| 8 | |
| 9 | #include <linux/backlight.h> |
| 10 | #include <linux/err.h> |
| 11 | #include <linux/gpio.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/kernel.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/of_gpio.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/regmap.h> |
| 19 | #include <linux/platform_data/sky81452-backlight.h> |
| 20 | #include <linux/slab.h> |
| 21 | |
| 22 | /* registers */ |
| 23 | #define SKY81452_REG0 0x00 |
| 24 | #define SKY81452_REG1 0x01 |
| 25 | #define SKY81452_REG2 0x02 |
| 26 | #define SKY81452_REG4 0x04 |
| 27 | #define SKY81452_REG5 0x05 |
| 28 | |
| 29 | /* bit mask */ |
| 30 | #define SKY81452_CS 0xFF |
| 31 | #define SKY81452_EN 0x3F |
| 32 | #define SKY81452_IGPW 0x20 |
| 33 | #define SKY81452_PWMMD 0x10 |
| 34 | #define SKY81452_PHASE 0x08 |
| 35 | #define SKY81452_ILIM 0x04 |
| 36 | #define SKY81452_VSHRT 0x03 |
| 37 | #define SKY81452_OCP 0x80 |
| 38 | #define SKY81452_OTMP 0x40 |
| 39 | #define SKY81452_SHRT 0x3F |
| 40 | #define SKY81452_OPN 0x3F |
| 41 | |
| 42 | #define SKY81452_DEFAULT_NAME "lcd-backlight" |
| 43 | #define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1) |
| 44 | |
| 45 | #define CTZ(b) __builtin_ctz(b) |
| 46 | |
| 47 | static int sky81452_bl_update_status(struct backlight_device *bd) |
| 48 | { |
| 49 | const struct sky81452_bl_platform_data *pdata = |
| 50 | dev_get_platdata(bd->dev.parent); |
| 51 | const unsigned int brightness = (unsigned int)bd->props.brightness; |
| 52 | struct regmap *regmap = bl_get_data(bd); |
| 53 | int ret; |
| 54 | |
| 55 | if (brightness > 0) { |
| 56 | ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); |
| 57 | if (ret < 0) |
| 58 | return ret; |
| 59 | |
| 60 | return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, |
| 61 | pdata->enable << CTZ(SKY81452_EN)); |
| 62 | } |
| 63 | |
| 64 | return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0); |
| 65 | } |
| 66 | |
| 67 | static const struct backlight_ops sky81452_bl_ops = { |
| 68 | .update_status = sky81452_bl_update_status, |
| 69 | }; |
| 70 | |
| 71 | static ssize_t sky81452_bl_store_enable(struct device *dev, |
| 72 | struct device_attribute *attr, const char *buf, size_t count) |
| 73 | { |
| 74 | struct regmap *regmap = bl_get_data(to_backlight_device(dev)); |
| 75 | unsigned long value; |
| 76 | int ret; |
| 77 | |
| 78 | ret = kstrtoul(buf, 16, &value); |
| 79 | if (ret < 0) |
| 80 | return ret; |
| 81 | |
| 82 | ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, |
| 83 | value << CTZ(SKY81452_EN)); |
| 84 | if (ret < 0) |
| 85 | return ret; |
| 86 | |
| 87 | return count; |
| 88 | } |
| 89 | |
| 90 | static ssize_t sky81452_bl_show_open_short(struct device *dev, |
| 91 | struct device_attribute *attr, char *buf) |
| 92 | { |
| 93 | struct regmap *regmap = bl_get_data(to_backlight_device(dev)); |
| 94 | unsigned int reg, value = 0; |
| 95 | char tmp[3]; |
| 96 | int i, ret; |
| 97 | |
| 98 | reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; |
| 99 | ret = regmap_read(regmap, reg, &value); |
| 100 | if (ret < 0) |
| 101 | return ret; |
| 102 | |
| 103 | if (value & SKY81452_SHRT) { |
| 104 | *buf = 0; |
| 105 | for (i = 0; i < 6; i++) { |
| 106 | if (value & 0x01) { |
| 107 | sprintf(tmp, "%d ", i + 1); |
| 108 | strcat(buf, tmp); |
| 109 | } |
| 110 | value >>= 1; |
| 111 | } |
| 112 | strcat(buf, "\n"); |
| 113 | } else { |
| 114 | strcpy(buf, "none\n"); |
| 115 | } |
| 116 | |
| 117 | return strlen(buf); |
| 118 | } |
| 119 | |
| 120 | static ssize_t sky81452_bl_show_fault(struct device *dev, |
| 121 | struct device_attribute *attr, char *buf) |
| 122 | { |
| 123 | struct regmap *regmap = bl_get_data(to_backlight_device(dev)); |
| 124 | unsigned int value = 0; |
| 125 | int ret; |
| 126 | |
| 127 | ret = regmap_read(regmap, SKY81452_REG4, &value); |
| 128 | if (ret < 0) |
| 129 | return ret; |
| 130 | |
| 131 | *buf = 0; |
| 132 | |
| 133 | if (value & SKY81452_OCP) |
| 134 | strcat(buf, "over-current "); |
| 135 | |
| 136 | if (value & SKY81452_OTMP) |
| 137 | strcat(buf, "over-temperature"); |
| 138 | |
| 139 | strcat(buf, "\n"); |
| 140 | return strlen(buf); |
| 141 | } |
| 142 | |
| 143 | static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable); |
| 144 | static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL); |
| 145 | static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL); |
| 146 | static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL); |
| 147 | |
| 148 | static struct attribute *sky81452_bl_attribute[] = { |
| 149 | &dev_attr_enable.attr, |
| 150 | &dev_attr_open.attr, |
| 151 | &dev_attr_short.attr, |
| 152 | &dev_attr_fault.attr, |
| 153 | NULL |
| 154 | }; |
| 155 | |
| 156 | static const struct attribute_group sky81452_bl_attr_group = { |
| 157 | .attrs = sky81452_bl_attribute, |
| 158 | }; |
| 159 | |
| 160 | #ifdef CONFIG_OF |
| 161 | static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( |
| 162 | struct device *dev) |
| 163 | { |
| 164 | struct device_node *np = of_node_get(dev->of_node); |
| 165 | struct sky81452_bl_platform_data *pdata; |
| 166 | int num_entry; |
| 167 | unsigned int sources[6]; |
| 168 | int ret; |
| 169 | |
| 170 | if (!np) { |
| 171 | dev_err(dev, "backlight node not found.\n"); |
| 172 | return ERR_PTR(-ENODATA); |
| 173 | } |
| 174 | |
| 175 | pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| 176 | if (!pdata) { |
| 177 | of_node_put(np); |
| 178 | return ERR_PTR(-ENOMEM); |
| 179 | } |
| 180 | |
| 181 | of_property_read_string(np, "name", &pdata->name); |
| 182 | pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm"); |
| 183 | pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode"); |
| 184 | pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift"); |
| 185 | pdata->gpio_enable = of_get_gpio(np, 0); |
| 186 | |
| 187 | ret = of_property_count_u32_elems(np, "led-sources"); |
| 188 | if (ret < 0) { |
| 189 | pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); |
| 190 | } else { |
| 191 | num_entry = ret; |
| 192 | if (num_entry > 6) |
| 193 | num_entry = 6; |
| 194 | |
| 195 | ret = of_property_read_u32_array(np, "led-sources", sources, |
| 196 | num_entry); |
| 197 | if (ret < 0) { |
| 198 | dev_err(dev, "led-sources node is invalid.\n"); |
| 199 | return ERR_PTR(-EINVAL); |
| 200 | } |
| 201 | |
| 202 | pdata->enable = 0; |
| 203 | while (--num_entry) |
| 204 | pdata->enable |= (1 << sources[num_entry]); |
| 205 | } |
| 206 | |
| 207 | ret = of_property_read_u32(np, |
| 208 | "skyworks,short-detection-threshold-volt", |
| 209 | &pdata->short_detection_threshold); |
| 210 | if (ret < 0) |
| 211 | pdata->short_detection_threshold = 7; |
| 212 | |
| 213 | ret = of_property_read_u32(np, "skyworks,current-limit-mA", |
| 214 | &pdata->boost_current_limit); |
| 215 | if (ret < 0) |
| 216 | pdata->boost_current_limit = 2750; |
| 217 | |
| 218 | of_node_put(np); |
| 219 | return pdata; |
| 220 | } |
| 221 | #else |
| 222 | static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( |
| 223 | struct device *dev) |
| 224 | { |
| 225 | return ERR_PTR(-EINVAL); |
| 226 | } |
| 227 | #endif |
| 228 | |
| 229 | static int sky81452_bl_init_device(struct regmap *regmap, |
| 230 | struct sky81452_bl_platform_data *pdata) |
| 231 | { |
| 232 | unsigned int value; |
| 233 | |
| 234 | value = pdata->ignore_pwm ? SKY81452_IGPW : 0; |
| 235 | value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0; |
| 236 | value |= pdata->phase_shift ? 0 : SKY81452_PHASE; |
| 237 | |
| 238 | if (pdata->boost_current_limit == 2300) |
| 239 | value |= SKY81452_ILIM; |
| 240 | else if (pdata->boost_current_limit != 2750) |
| 241 | return -EINVAL; |
| 242 | |
| 243 | if (pdata->short_detection_threshold < 4 || |
| 244 | pdata->short_detection_threshold > 7) |
| 245 | return -EINVAL; |
| 246 | value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT); |
| 247 | |
| 248 | return regmap_write(regmap, SKY81452_REG2, value); |
| 249 | } |
| 250 | |
| 251 | static int sky81452_bl_probe(struct platform_device *pdev) |
| 252 | { |
| 253 | struct device *dev = &pdev->dev; |
| 254 | struct regmap *regmap = dev_get_drvdata(dev->parent); |
| 255 | struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev); |
| 256 | struct backlight_device *bd; |
| 257 | struct backlight_properties props; |
| 258 | const char *name; |
| 259 | int ret; |
| 260 | |
| 261 | if (!pdata) { |
| 262 | pdata = sky81452_bl_parse_dt(dev); |
| 263 | if (IS_ERR(pdata)) |
| 264 | return PTR_ERR(pdata); |
| 265 | } |
| 266 | |
| 267 | if (gpio_is_valid(pdata->gpio_enable)) { |
| 268 | ret = devm_gpio_request_one(dev, pdata->gpio_enable, |
| 269 | GPIOF_OUT_INIT_HIGH, "sky81452-en"); |
| 270 | if (ret < 0) { |
| 271 | dev_err(dev, "failed to request GPIO. err=%d\n", ret); |
| 272 | return ret; |
| 273 | } |
| 274 | } |
| 275 | |
| 276 | ret = sky81452_bl_init_device(regmap, pdata); |
| 277 | if (ret < 0) { |
| 278 | dev_err(dev, "failed to initialize. err=%d\n", ret); |
| 279 | return ret; |
| 280 | } |
| 281 | |
| 282 | memset(&props, 0, sizeof(props)); |
| 283 | props.max_brightness = SKY81452_MAX_BRIGHTNESS, |
| 284 | name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME; |
| 285 | bd = devm_backlight_device_register(dev, name, dev, regmap, |
| 286 | &sky81452_bl_ops, &props); |
| 287 | if (IS_ERR(bd)) { |
| 288 | dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd)); |
| 289 | return PTR_ERR(bd); |
| 290 | } |
| 291 | |
| 292 | platform_set_drvdata(pdev, bd); |
| 293 | |
| 294 | ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); |
| 295 | if (ret < 0) { |
| 296 | dev_err(dev, "failed to create attribute. err=%d\n", ret); |
| 297 | return ret; |
| 298 | } |
| 299 | |
| 300 | return ret; |
| 301 | } |
| 302 | |
| 303 | static int sky81452_bl_remove(struct platform_device *pdev) |
| 304 | { |
| 305 | const struct sky81452_bl_platform_data *pdata = |
| 306 | dev_get_platdata(&pdev->dev); |
| 307 | struct backlight_device *bd = platform_get_drvdata(pdev); |
| 308 | |
| 309 | sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group); |
| 310 | |
| 311 | bd->props.power = FB_BLANK_UNBLANK; |
| 312 | bd->props.brightness = 0; |
| 313 | backlight_update_status(bd); |
| 314 | |
| 315 | if (gpio_is_valid(pdata->gpio_enable)) |
| 316 | gpio_set_value_cansleep(pdata->gpio_enable, 0); |
| 317 | |
| 318 | return 0; |
| 319 | } |
| 320 | |
| 321 | #ifdef CONFIG_OF |
| 322 | static const struct of_device_id sky81452_bl_of_match[] = { |
| 323 | { .compatible = "skyworks,sky81452-backlight", }, |
| 324 | { } |
| 325 | }; |
| 326 | MODULE_DEVICE_TABLE(of, sky81452_bl_of_match); |
| 327 | #endif |
| 328 | |
| 329 | static struct platform_driver sky81452_bl_driver = { |
| 330 | .driver = { |
| 331 | .name = "sky81452-backlight", |
| 332 | .of_match_table = of_match_ptr(sky81452_bl_of_match), |
| 333 | }, |
| 334 | .probe = sky81452_bl_probe, |
| 335 | .remove = sky81452_bl_remove, |
| 336 | }; |
| 337 | |
| 338 | module_platform_driver(sky81452_bl_driver); |
| 339 | |
| 340 | MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver"); |
| 341 | MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>"); |
| 342 | MODULE_LICENSE("GPL v2"); |