Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | USB Driver layer for GSM modems |
| 4 | |
| 5 | Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de> |
| 6 | |
| 7 | Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> |
| 8 | |
| 9 | History: see the git log. |
| 10 | |
| 11 | Work sponsored by: Sigos GmbH, Germany <info@sigos.de> |
| 12 | |
| 13 | This driver exists because the "normal" serial driver doesn't work too well |
| 14 | with GSM modems. Issues: |
| 15 | - data loss -- one single Receive URB is not nearly enough |
| 16 | - controlling the baud rate doesn't make sense |
| 17 | */ |
| 18 | |
| 19 | #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" |
| 20 | #define DRIVER_DESC "USB Driver for GSM modems" |
| 21 | |
| 22 | #include <linux/kernel.h> |
| 23 | #include <linux/jiffies.h> |
| 24 | #include <linux/errno.h> |
| 25 | #include <linux/slab.h> |
| 26 | #include <linux/tty.h> |
| 27 | #include <linux/tty_flip.h> |
| 28 | #include <linux/module.h> |
| 29 | #include <linux/bitops.h> |
| 30 | #include <linux/uaccess.h> |
| 31 | #include <linux/usb.h> |
| 32 | #include <linux/usb/serial.h> |
| 33 | #include <linux/serial.h> |
| 34 | #include "usb-wwan.h" |
| 35 | |
| 36 | /* |
| 37 | * Generate DTR/RTS signals on the port using the SET_CONTROL_LINE_STATE request |
| 38 | * in CDC ACM. |
| 39 | */ |
| 40 | static int usb_wwan_send_setup(struct usb_serial_port *port) |
| 41 | { |
| 42 | struct usb_serial *serial = port->serial; |
| 43 | struct usb_wwan_port_private *portdata; |
| 44 | int val = 0; |
| 45 | int ifnum; |
| 46 | int res; |
| 47 | |
| 48 | portdata = usb_get_serial_port_data(port); |
| 49 | |
| 50 | if (portdata->dtr_state) |
| 51 | val |= 0x01; |
| 52 | if (portdata->rts_state) |
| 53 | val |= 0x02; |
| 54 | |
| 55 | ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; |
| 56 | |
| 57 | res = usb_autopm_get_interface(serial->interface); |
| 58 | if (res) |
| 59 | return res; |
| 60 | |
| 61 | res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), |
| 62 | 0x22, 0x21, val, ifnum, NULL, 0, |
| 63 | USB_CTRL_SET_TIMEOUT); |
| 64 | |
| 65 | usb_autopm_put_interface(port->serial->interface); |
| 66 | |
| 67 | return res; |
| 68 | } |
| 69 | |
| 70 | void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) |
| 71 | { |
| 72 | struct usb_wwan_port_private *portdata; |
| 73 | struct usb_wwan_intf_private *intfdata; |
| 74 | |
| 75 | intfdata = usb_get_serial_data(port->serial); |
| 76 | |
| 77 | if (!intfdata->use_send_setup) |
| 78 | return; |
| 79 | |
| 80 | portdata = usb_get_serial_port_data(port); |
| 81 | /* FIXME: locking */ |
| 82 | portdata->rts_state = on; |
| 83 | portdata->dtr_state = on; |
| 84 | |
| 85 | usb_wwan_send_setup(port); |
| 86 | } |
| 87 | EXPORT_SYMBOL(usb_wwan_dtr_rts); |
| 88 | |
| 89 | int usb_wwan_tiocmget(struct tty_struct *tty) |
| 90 | { |
| 91 | struct usb_serial_port *port = tty->driver_data; |
| 92 | unsigned int value; |
| 93 | struct usb_wwan_port_private *portdata; |
| 94 | |
| 95 | portdata = usb_get_serial_port_data(port); |
| 96 | |
| 97 | value = ((portdata->rts_state) ? TIOCM_RTS : 0) | |
| 98 | ((portdata->dtr_state) ? TIOCM_DTR : 0) | |
| 99 | ((portdata->cts_state) ? TIOCM_CTS : 0) | |
| 100 | ((portdata->dsr_state) ? TIOCM_DSR : 0) | |
| 101 | ((portdata->dcd_state) ? TIOCM_CAR : 0) | |
| 102 | ((portdata->ri_state) ? TIOCM_RNG : 0); |
| 103 | |
| 104 | return value; |
| 105 | } |
| 106 | EXPORT_SYMBOL(usb_wwan_tiocmget); |
| 107 | |
| 108 | int usb_wwan_tiocmset(struct tty_struct *tty, |
| 109 | unsigned int set, unsigned int clear) |
| 110 | { |
| 111 | struct usb_serial_port *port = tty->driver_data; |
| 112 | struct usb_wwan_port_private *portdata; |
| 113 | struct usb_wwan_intf_private *intfdata; |
| 114 | |
| 115 | portdata = usb_get_serial_port_data(port); |
| 116 | intfdata = usb_get_serial_data(port->serial); |
| 117 | |
| 118 | if (!intfdata->use_send_setup) |
| 119 | return -EINVAL; |
| 120 | |
| 121 | /* FIXME: what locks portdata fields ? */ |
| 122 | if (set & TIOCM_RTS) |
| 123 | portdata->rts_state = 1; |
| 124 | if (set & TIOCM_DTR) |
| 125 | portdata->dtr_state = 1; |
| 126 | |
| 127 | if (clear & TIOCM_RTS) |
| 128 | portdata->rts_state = 0; |
| 129 | if (clear & TIOCM_DTR) |
| 130 | portdata->dtr_state = 0; |
| 131 | return usb_wwan_send_setup(port); |
| 132 | } |
| 133 | EXPORT_SYMBOL(usb_wwan_tiocmset); |
| 134 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 135 | int usb_wwan_get_serial_info(struct tty_struct *tty, |
| 136 | struct serial_struct *ss) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 137 | { |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 138 | struct usb_serial_port *port = tty->driver_data; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 139 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 140 | ss->line = port->minor; |
| 141 | ss->port = port->port_number; |
| 142 | ss->baud_base = tty_get_baud_rate(port->port.tty); |
| 143 | ss->close_delay = port->port.close_delay / 10; |
| 144 | ss->closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 145 | ASYNC_CLOSING_WAIT_NONE : |
| 146 | port->port.closing_wait / 10; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 147 | return 0; |
| 148 | } |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 149 | EXPORT_SYMBOL(usb_wwan_get_serial_info); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 150 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 151 | int usb_wwan_set_serial_info(struct tty_struct *tty, |
| 152 | struct serial_struct *ss) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 153 | { |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 154 | struct usb_serial_port *port = tty->driver_data; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 155 | unsigned int closing_wait, close_delay; |
| 156 | int retval = 0; |
| 157 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 158 | close_delay = ss->close_delay * 10; |
| 159 | closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ? |
| 160 | ASYNC_CLOSING_WAIT_NONE : ss->closing_wait * 10; |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 161 | |
| 162 | mutex_lock(&port->port.mutex); |
| 163 | |
| 164 | if (!capable(CAP_SYS_ADMIN)) { |
| 165 | if ((close_delay != port->port.close_delay) || |
| 166 | (closing_wait != port->port.closing_wait)) |
| 167 | retval = -EPERM; |
| 168 | else |
| 169 | retval = -EOPNOTSUPP; |
| 170 | } else { |
| 171 | port->port.close_delay = close_delay; |
| 172 | port->port.closing_wait = closing_wait; |
| 173 | } |
| 174 | |
| 175 | mutex_unlock(&port->port.mutex); |
| 176 | return retval; |
| 177 | } |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 178 | EXPORT_SYMBOL(usb_wwan_set_serial_info); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 179 | |
| 180 | int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, |
| 181 | const unsigned char *buf, int count) |
| 182 | { |
| 183 | struct usb_wwan_port_private *portdata; |
| 184 | struct usb_wwan_intf_private *intfdata; |
| 185 | int i; |
| 186 | int left, todo; |
| 187 | struct urb *this_urb = NULL; /* spurious */ |
| 188 | int err; |
| 189 | unsigned long flags; |
| 190 | |
| 191 | portdata = usb_get_serial_port_data(port); |
| 192 | intfdata = usb_get_serial_data(port->serial); |
| 193 | |
| 194 | dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); |
| 195 | |
| 196 | i = 0; |
| 197 | left = count; |
| 198 | for (i = 0; left > 0 && i < N_OUT_URB; i++) { |
| 199 | todo = left; |
| 200 | if (todo > OUT_BUFLEN) |
| 201 | todo = OUT_BUFLEN; |
| 202 | |
| 203 | this_urb = portdata->out_urbs[i]; |
| 204 | if (test_and_set_bit(i, &portdata->out_busy)) { |
| 205 | if (time_before(jiffies, |
| 206 | portdata->tx_start_time[i] + 10 * HZ)) |
| 207 | continue; |
| 208 | usb_unlink_urb(this_urb); |
| 209 | continue; |
| 210 | } |
| 211 | dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__, |
| 212 | usb_pipeendpoint(this_urb->pipe), i); |
| 213 | |
| 214 | err = usb_autopm_get_interface_async(port->serial->interface); |
| 215 | if (err < 0) { |
| 216 | clear_bit(i, &portdata->out_busy); |
| 217 | break; |
| 218 | } |
| 219 | |
| 220 | /* send the data */ |
| 221 | memcpy(this_urb->transfer_buffer, buf, todo); |
| 222 | this_urb->transfer_buffer_length = todo; |
| 223 | |
| 224 | spin_lock_irqsave(&intfdata->susp_lock, flags); |
| 225 | if (intfdata->suspended) { |
| 226 | usb_anchor_urb(this_urb, &portdata->delayed); |
| 227 | spin_unlock_irqrestore(&intfdata->susp_lock, flags); |
| 228 | } else { |
| 229 | intfdata->in_flight++; |
| 230 | spin_unlock_irqrestore(&intfdata->susp_lock, flags); |
| 231 | err = usb_submit_urb(this_urb, GFP_ATOMIC); |
| 232 | if (err) { |
| 233 | dev_err(&port->dev, |
| 234 | "%s: submit urb %d failed: %d\n", |
| 235 | __func__, i, err); |
| 236 | clear_bit(i, &portdata->out_busy); |
| 237 | spin_lock_irqsave(&intfdata->susp_lock, flags); |
| 238 | intfdata->in_flight--; |
| 239 | spin_unlock_irqrestore(&intfdata->susp_lock, |
| 240 | flags); |
| 241 | usb_autopm_put_interface_async(port->serial->interface); |
| 242 | break; |
| 243 | } |
| 244 | } |
| 245 | |
| 246 | portdata->tx_start_time[i] = jiffies; |
| 247 | buf += todo; |
| 248 | left -= todo; |
| 249 | } |
| 250 | |
| 251 | count -= left; |
| 252 | dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count); |
| 253 | return count; |
| 254 | } |
| 255 | EXPORT_SYMBOL(usb_wwan_write); |
| 256 | |
| 257 | static void usb_wwan_indat_callback(struct urb *urb) |
| 258 | { |
| 259 | int err; |
| 260 | int endpoint; |
| 261 | struct usb_serial_port *port; |
| 262 | struct device *dev; |
| 263 | unsigned char *data = urb->transfer_buffer; |
| 264 | int status = urb->status; |
| 265 | |
| 266 | endpoint = usb_pipeendpoint(urb->pipe); |
| 267 | port = urb->context; |
| 268 | dev = &port->dev; |
| 269 | |
| 270 | if (status) { |
| 271 | dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", |
| 272 | __func__, status, endpoint); |
| 273 | } else { |
| 274 | if (urb->actual_length) { |
| 275 | tty_insert_flip_string(&port->port, data, |
| 276 | urb->actual_length); |
| 277 | tty_flip_buffer_push(&port->port); |
| 278 | } else |
| 279 | dev_dbg(dev, "%s: empty read urb received\n", __func__); |
| 280 | } |
| 281 | /* Resubmit urb so we continue receiving */ |
| 282 | err = usb_submit_urb(urb, GFP_ATOMIC); |
| 283 | if (err) { |
| 284 | if (err != -EPERM && err != -ENODEV) { |
| 285 | dev_err(dev, "%s: resubmit read urb failed. (%d)\n", |
| 286 | __func__, err); |
| 287 | /* busy also in error unless we are killed */ |
| 288 | usb_mark_last_busy(port->serial->dev); |
| 289 | } |
| 290 | } else { |
| 291 | usb_mark_last_busy(port->serial->dev); |
| 292 | } |
| 293 | } |
| 294 | |
| 295 | static void usb_wwan_outdat_callback(struct urb *urb) |
| 296 | { |
| 297 | struct usb_serial_port *port; |
| 298 | struct usb_wwan_port_private *portdata; |
| 299 | struct usb_wwan_intf_private *intfdata; |
| 300 | unsigned long flags; |
| 301 | int i; |
| 302 | |
| 303 | port = urb->context; |
| 304 | intfdata = usb_get_serial_data(port->serial); |
| 305 | |
| 306 | usb_serial_port_softint(port); |
| 307 | usb_autopm_put_interface_async(port->serial->interface); |
| 308 | portdata = usb_get_serial_port_data(port); |
| 309 | spin_lock_irqsave(&intfdata->susp_lock, flags); |
| 310 | intfdata->in_flight--; |
| 311 | spin_unlock_irqrestore(&intfdata->susp_lock, flags); |
| 312 | |
| 313 | for (i = 0; i < N_OUT_URB; ++i) { |
| 314 | if (portdata->out_urbs[i] == urb) { |
| 315 | smp_mb__before_atomic(); |
| 316 | clear_bit(i, &portdata->out_busy); |
| 317 | break; |
| 318 | } |
| 319 | } |
| 320 | } |
| 321 | |
| 322 | int usb_wwan_write_room(struct tty_struct *tty) |
| 323 | { |
| 324 | struct usb_serial_port *port = tty->driver_data; |
| 325 | struct usb_wwan_port_private *portdata; |
| 326 | int i; |
| 327 | int data_len = 0; |
| 328 | struct urb *this_urb; |
| 329 | |
| 330 | portdata = usb_get_serial_port_data(port); |
| 331 | |
| 332 | for (i = 0; i < N_OUT_URB; i++) { |
| 333 | this_urb = portdata->out_urbs[i]; |
| 334 | if (this_urb && !test_bit(i, &portdata->out_busy)) |
| 335 | data_len += OUT_BUFLEN; |
| 336 | } |
| 337 | |
| 338 | dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); |
| 339 | return data_len; |
| 340 | } |
| 341 | EXPORT_SYMBOL(usb_wwan_write_room); |
| 342 | |
| 343 | int usb_wwan_chars_in_buffer(struct tty_struct *tty) |
| 344 | { |
| 345 | struct usb_serial_port *port = tty->driver_data; |
| 346 | struct usb_wwan_port_private *portdata; |
| 347 | int i; |
| 348 | int data_len = 0; |
| 349 | struct urb *this_urb; |
| 350 | |
| 351 | portdata = usb_get_serial_port_data(port); |
| 352 | |
| 353 | for (i = 0; i < N_OUT_URB; i++) { |
| 354 | this_urb = portdata->out_urbs[i]; |
| 355 | /* FIXME: This locking is insufficient as this_urb may |
| 356 | go unused during the test */ |
| 357 | if (this_urb && test_bit(i, &portdata->out_busy)) |
| 358 | data_len += this_urb->transfer_buffer_length; |
| 359 | } |
| 360 | dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); |
| 361 | return data_len; |
| 362 | } |
| 363 | EXPORT_SYMBOL(usb_wwan_chars_in_buffer); |
| 364 | |
| 365 | int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) |
| 366 | { |
| 367 | struct usb_wwan_port_private *portdata; |
| 368 | struct usb_wwan_intf_private *intfdata; |
| 369 | struct usb_serial *serial = port->serial; |
| 370 | int i, err; |
| 371 | struct urb *urb; |
| 372 | |
| 373 | portdata = usb_get_serial_port_data(port); |
| 374 | intfdata = usb_get_serial_data(serial); |
| 375 | |
| 376 | if (port->interrupt_in_urb) { |
| 377 | err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); |
| 378 | if (err) { |
| 379 | dev_err(&port->dev, "%s: submit int urb failed: %d\n", |
| 380 | __func__, err); |
| 381 | } |
| 382 | } |
| 383 | |
| 384 | /* Start reading from the IN endpoint */ |
| 385 | for (i = 0; i < N_IN_URB; i++) { |
| 386 | urb = portdata->in_urbs[i]; |
| 387 | if (!urb) |
| 388 | continue; |
| 389 | err = usb_submit_urb(urb, GFP_KERNEL); |
| 390 | if (err) { |
| 391 | dev_err(&port->dev, |
| 392 | "%s: submit read urb %d failed: %d\n", |
| 393 | __func__, i, err); |
| 394 | } |
| 395 | } |
| 396 | |
| 397 | spin_lock_irq(&intfdata->susp_lock); |
| 398 | if (++intfdata->open_ports == 1) |
| 399 | serial->interface->needs_remote_wakeup = 1; |
| 400 | spin_unlock_irq(&intfdata->susp_lock); |
| 401 | /* this balances a get in the generic USB serial code */ |
| 402 | usb_autopm_put_interface(serial->interface); |
| 403 | |
| 404 | return 0; |
| 405 | } |
| 406 | EXPORT_SYMBOL(usb_wwan_open); |
| 407 | |
| 408 | static void unbusy_queued_urb(struct urb *urb, |
| 409 | struct usb_wwan_port_private *portdata) |
| 410 | { |
| 411 | int i; |
| 412 | |
| 413 | for (i = 0; i < N_OUT_URB; i++) { |
| 414 | if (urb == portdata->out_urbs[i]) { |
| 415 | clear_bit(i, &portdata->out_busy); |
| 416 | break; |
| 417 | } |
| 418 | } |
| 419 | } |
| 420 | |
| 421 | void usb_wwan_close(struct usb_serial_port *port) |
| 422 | { |
| 423 | int i; |
| 424 | struct usb_serial *serial = port->serial; |
| 425 | struct usb_wwan_port_private *portdata; |
| 426 | struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); |
| 427 | struct urb *urb; |
| 428 | |
| 429 | portdata = usb_get_serial_port_data(port); |
| 430 | |
| 431 | /* |
| 432 | * Need to take susp_lock to make sure port is not already being |
| 433 | * resumed, but no need to hold it due to initialized |
| 434 | */ |
| 435 | spin_lock_irq(&intfdata->susp_lock); |
| 436 | if (--intfdata->open_ports == 0) |
| 437 | serial->interface->needs_remote_wakeup = 0; |
| 438 | spin_unlock_irq(&intfdata->susp_lock); |
| 439 | |
| 440 | for (;;) { |
| 441 | urb = usb_get_from_anchor(&portdata->delayed); |
| 442 | if (!urb) |
| 443 | break; |
| 444 | unbusy_queued_urb(urb, portdata); |
| 445 | usb_autopm_put_interface_async(serial->interface); |
| 446 | } |
| 447 | |
| 448 | for (i = 0; i < N_IN_URB; i++) |
| 449 | usb_kill_urb(portdata->in_urbs[i]); |
| 450 | for (i = 0; i < N_OUT_URB; i++) |
| 451 | usb_kill_urb(portdata->out_urbs[i]); |
| 452 | usb_kill_urb(port->interrupt_in_urb); |
| 453 | |
| 454 | usb_autopm_get_interface_no_resume(serial->interface); |
| 455 | } |
| 456 | EXPORT_SYMBOL(usb_wwan_close); |
| 457 | |
| 458 | static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, |
| 459 | int endpoint, |
| 460 | int dir, void *ctx, char *buf, int len, |
| 461 | void (*callback) (struct urb *)) |
| 462 | { |
| 463 | struct usb_serial *serial = port->serial; |
| 464 | struct urb *urb; |
| 465 | |
| 466 | urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ |
| 467 | if (!urb) |
| 468 | return NULL; |
| 469 | |
| 470 | usb_fill_bulk_urb(urb, serial->dev, |
| 471 | usb_sndbulkpipe(serial->dev, endpoint) | dir, |
| 472 | buf, len, callback, ctx); |
| 473 | |
| 474 | return urb; |
| 475 | } |
| 476 | |
| 477 | int usb_wwan_port_probe(struct usb_serial_port *port) |
| 478 | { |
| 479 | struct usb_wwan_port_private *portdata; |
| 480 | struct urb *urb; |
| 481 | u8 *buffer; |
| 482 | int i; |
| 483 | |
| 484 | if (!port->bulk_in_size || !port->bulk_out_size) |
| 485 | return -ENODEV; |
| 486 | |
| 487 | portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); |
| 488 | if (!portdata) |
| 489 | return -ENOMEM; |
| 490 | |
| 491 | init_usb_anchor(&portdata->delayed); |
| 492 | |
| 493 | for (i = 0; i < N_IN_URB; i++) { |
| 494 | buffer = (u8 *)__get_free_page(GFP_KERNEL); |
| 495 | if (!buffer) |
| 496 | goto bail_out_error; |
| 497 | portdata->in_buffer[i] = buffer; |
| 498 | |
| 499 | urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, |
| 500 | USB_DIR_IN, port, |
| 501 | buffer, IN_BUFLEN, |
| 502 | usb_wwan_indat_callback); |
| 503 | portdata->in_urbs[i] = urb; |
| 504 | } |
| 505 | |
| 506 | for (i = 0; i < N_OUT_URB; i++) { |
| 507 | buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); |
| 508 | if (!buffer) |
| 509 | goto bail_out_error2; |
| 510 | portdata->out_buffer[i] = buffer; |
| 511 | |
| 512 | urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, |
| 513 | USB_DIR_OUT, port, |
| 514 | buffer, OUT_BUFLEN, |
| 515 | usb_wwan_outdat_callback); |
| 516 | portdata->out_urbs[i] = urb; |
| 517 | } |
| 518 | |
| 519 | usb_set_serial_port_data(port, portdata); |
| 520 | |
| 521 | return 0; |
| 522 | |
| 523 | bail_out_error2: |
| 524 | for (i = 0; i < N_OUT_URB; i++) { |
| 525 | usb_free_urb(portdata->out_urbs[i]); |
| 526 | kfree(portdata->out_buffer[i]); |
| 527 | } |
| 528 | bail_out_error: |
| 529 | for (i = 0; i < N_IN_URB; i++) { |
| 530 | usb_free_urb(portdata->in_urbs[i]); |
| 531 | free_page((unsigned long)portdata->in_buffer[i]); |
| 532 | } |
| 533 | kfree(portdata); |
| 534 | |
| 535 | return -ENOMEM; |
| 536 | } |
| 537 | EXPORT_SYMBOL_GPL(usb_wwan_port_probe); |
| 538 | |
| 539 | int usb_wwan_port_remove(struct usb_serial_port *port) |
| 540 | { |
| 541 | int i; |
| 542 | struct usb_wwan_port_private *portdata; |
| 543 | |
| 544 | portdata = usb_get_serial_port_data(port); |
| 545 | usb_set_serial_port_data(port, NULL); |
| 546 | |
| 547 | for (i = 0; i < N_IN_URB; i++) { |
| 548 | usb_free_urb(portdata->in_urbs[i]); |
| 549 | free_page((unsigned long)portdata->in_buffer[i]); |
| 550 | } |
| 551 | for (i = 0; i < N_OUT_URB; i++) { |
| 552 | usb_free_urb(portdata->out_urbs[i]); |
| 553 | kfree(portdata->out_buffer[i]); |
| 554 | } |
| 555 | |
| 556 | kfree(portdata); |
| 557 | |
| 558 | return 0; |
| 559 | } |
| 560 | EXPORT_SYMBOL(usb_wwan_port_remove); |
| 561 | |
| 562 | #ifdef CONFIG_PM |
| 563 | static void stop_urbs(struct usb_serial *serial) |
| 564 | { |
| 565 | int i, j; |
| 566 | struct usb_serial_port *port; |
| 567 | struct usb_wwan_port_private *portdata; |
| 568 | |
| 569 | for (i = 0; i < serial->num_ports; ++i) { |
| 570 | port = serial->port[i]; |
| 571 | portdata = usb_get_serial_port_data(port); |
| 572 | if (!portdata) |
| 573 | continue; |
| 574 | for (j = 0; j < N_IN_URB; j++) |
| 575 | usb_kill_urb(portdata->in_urbs[j]); |
| 576 | for (j = 0; j < N_OUT_URB; j++) |
| 577 | usb_kill_urb(portdata->out_urbs[j]); |
| 578 | usb_kill_urb(port->interrupt_in_urb); |
| 579 | } |
| 580 | } |
| 581 | |
| 582 | int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) |
| 583 | { |
| 584 | struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); |
| 585 | |
| 586 | spin_lock_irq(&intfdata->susp_lock); |
| 587 | if (PMSG_IS_AUTO(message)) { |
| 588 | if (intfdata->in_flight) { |
| 589 | spin_unlock_irq(&intfdata->susp_lock); |
| 590 | return -EBUSY; |
| 591 | } |
| 592 | } |
| 593 | intfdata->suspended = 1; |
| 594 | spin_unlock_irq(&intfdata->susp_lock); |
| 595 | |
| 596 | stop_urbs(serial); |
| 597 | |
| 598 | return 0; |
| 599 | } |
| 600 | EXPORT_SYMBOL(usb_wwan_suspend); |
| 601 | |
| 602 | /* Caller must hold susp_lock. */ |
| 603 | static int usb_wwan_submit_delayed_urbs(struct usb_serial_port *port) |
| 604 | { |
| 605 | struct usb_serial *serial = port->serial; |
| 606 | struct usb_wwan_intf_private *data = usb_get_serial_data(serial); |
| 607 | struct usb_wwan_port_private *portdata; |
| 608 | struct urb *urb; |
| 609 | int err_count = 0; |
| 610 | int err; |
| 611 | |
| 612 | portdata = usb_get_serial_port_data(port); |
| 613 | |
| 614 | for (;;) { |
| 615 | urb = usb_get_from_anchor(&portdata->delayed); |
| 616 | if (!urb) |
| 617 | break; |
| 618 | |
| 619 | err = usb_submit_urb(urb, GFP_ATOMIC); |
| 620 | if (err) { |
| 621 | dev_err(&port->dev, "%s: submit urb failed: %d\n", |
| 622 | __func__, err); |
| 623 | err_count++; |
| 624 | unbusy_queued_urb(urb, portdata); |
| 625 | usb_autopm_put_interface_async(serial->interface); |
| 626 | continue; |
| 627 | } |
| 628 | data->in_flight++; |
| 629 | } |
| 630 | |
| 631 | if (err_count) |
| 632 | return -EIO; |
| 633 | |
| 634 | return 0; |
| 635 | } |
| 636 | |
| 637 | int usb_wwan_resume(struct usb_serial *serial) |
| 638 | { |
| 639 | int i, j; |
| 640 | struct usb_serial_port *port; |
| 641 | struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); |
| 642 | struct usb_wwan_port_private *portdata; |
| 643 | struct urb *urb; |
| 644 | int err; |
| 645 | int err_count = 0; |
| 646 | |
| 647 | spin_lock_irq(&intfdata->susp_lock); |
| 648 | for (i = 0; i < serial->num_ports; i++) { |
| 649 | port = serial->port[i]; |
| 650 | |
| 651 | if (!tty_port_initialized(&port->port)) |
| 652 | continue; |
| 653 | |
| 654 | portdata = usb_get_serial_port_data(port); |
| 655 | |
| 656 | if (port->interrupt_in_urb) { |
| 657 | err = usb_submit_urb(port->interrupt_in_urb, |
| 658 | GFP_ATOMIC); |
| 659 | if (err) { |
| 660 | dev_err(&port->dev, |
| 661 | "%s: submit int urb failed: %d\n", |
| 662 | __func__, err); |
| 663 | err_count++; |
| 664 | } |
| 665 | } |
| 666 | |
| 667 | err = usb_wwan_submit_delayed_urbs(port); |
| 668 | if (err) |
| 669 | err_count++; |
| 670 | |
| 671 | for (j = 0; j < N_IN_URB; j++) { |
| 672 | urb = portdata->in_urbs[j]; |
| 673 | err = usb_submit_urb(urb, GFP_ATOMIC); |
| 674 | if (err < 0) { |
| 675 | dev_err(&port->dev, |
| 676 | "%s: submit read urb %d failed: %d\n", |
| 677 | __func__, i, err); |
| 678 | err_count++; |
| 679 | } |
| 680 | } |
| 681 | } |
| 682 | intfdata->suspended = 0; |
| 683 | spin_unlock_irq(&intfdata->susp_lock); |
| 684 | |
| 685 | if (err_count) |
| 686 | return -EIO; |
| 687 | |
| 688 | return 0; |
| 689 | } |
| 690 | EXPORT_SYMBOL(usb_wwan_resume); |
| 691 | #endif |
| 692 | |
| 693 | MODULE_AUTHOR(DRIVER_AUTHOR); |
| 694 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 695 | MODULE_LICENSE("GPL v2"); |