David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /**************************************************************************** |
| 3 | * Driver for Solarflare network controllers and boards |
| 4 | * Copyright 2005-2006 Fen Systems Ltd. |
| 5 | * Copyright 2006-2012 Solarflare Communications Inc. |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <linux/netdevice.h> |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/delay.h> |
| 11 | #include <linux/kernel_stat.h> |
| 12 | #include <linux/pci.h> |
| 13 | #include <linux/ethtool.h> |
| 14 | #include <linux/ip.h> |
| 15 | #include <linux/in.h> |
| 16 | #include <linux/udp.h> |
| 17 | #include <linux/rtnetlink.h> |
| 18 | #include <linux/slab.h> |
| 19 | #include "net_driver.h" |
| 20 | #include "efx.h" |
| 21 | #include "nic.h" |
| 22 | #include "selftest.h" |
| 23 | #include "workarounds.h" |
| 24 | |
| 25 | /* IRQ latency can be enormous because: |
| 26 | * - All IRQs may be disabled on a CPU for a *long* time by e.g. a |
| 27 | * slow serial console or an old IDE driver doing error recovery |
| 28 | * - The PREEMPT_RT patches mostly deal with this, but also allow a |
| 29 | * tasklet or normal task to be given higher priority than our IRQ |
| 30 | * threads |
| 31 | * Try to avoid blaming the hardware for this. |
| 32 | */ |
| 33 | #define IRQ_TIMEOUT HZ |
| 34 | |
| 35 | /* |
| 36 | * Loopback test packet structure |
| 37 | * |
| 38 | * The self-test should stress every RSS vector, and unfortunately |
| 39 | * Falcon only performs RSS on TCP/UDP packets. |
| 40 | */ |
| 41 | struct efx_loopback_payload { |
| 42 | struct ethhdr header; |
| 43 | struct iphdr ip; |
| 44 | struct udphdr udp; |
| 45 | __be16 iteration; |
| 46 | char msg[64]; |
| 47 | } __packed; |
| 48 | |
| 49 | /* Loopback test source MAC address */ |
| 50 | static const u8 payload_source[ETH_ALEN] __aligned(2) = { |
| 51 | 0x00, 0x0f, 0x53, 0x1b, 0x1b, 0x1b, |
| 52 | }; |
| 53 | |
| 54 | static const char payload_msg[] = |
| 55 | "Hello world! This is an Efx loopback test in progress!"; |
| 56 | |
| 57 | /* Interrupt mode names */ |
| 58 | static const unsigned int efx_interrupt_mode_max = EFX_INT_MODE_MAX; |
| 59 | static const char *const efx_interrupt_mode_names[] = { |
| 60 | [EFX_INT_MODE_MSIX] = "MSI-X", |
| 61 | [EFX_INT_MODE_MSI] = "MSI", |
| 62 | [EFX_INT_MODE_LEGACY] = "legacy", |
| 63 | }; |
| 64 | #define INT_MODE(efx) \ |
| 65 | STRING_TABLE_LOOKUP(efx->interrupt_mode, efx_interrupt_mode) |
| 66 | |
| 67 | /** |
| 68 | * efx_loopback_state - persistent state during a loopback selftest |
| 69 | * @flush: Drop all packets in efx_loopback_rx_packet |
| 70 | * @packet_count: Number of packets being used in this test |
| 71 | * @skbs: An array of skbs transmitted |
| 72 | * @offload_csum: Checksums are being offloaded |
| 73 | * @rx_good: RX good packet count |
| 74 | * @rx_bad: RX bad packet count |
| 75 | * @payload: Payload used in tests |
| 76 | */ |
| 77 | struct efx_loopback_state { |
| 78 | bool flush; |
| 79 | int packet_count; |
| 80 | struct sk_buff **skbs; |
| 81 | bool offload_csum; |
| 82 | atomic_t rx_good; |
| 83 | atomic_t rx_bad; |
| 84 | struct efx_loopback_payload payload; |
| 85 | }; |
| 86 | |
| 87 | /* How long to wait for all the packets to arrive (in ms) */ |
| 88 | #define LOOPBACK_TIMEOUT_MS 1000 |
| 89 | |
| 90 | /************************************************************************** |
| 91 | * |
| 92 | * MII, NVRAM and register tests |
| 93 | * |
| 94 | **************************************************************************/ |
| 95 | |
| 96 | static int efx_test_phy_alive(struct efx_nic *efx, struct efx_self_tests *tests) |
| 97 | { |
| 98 | int rc = 0; |
| 99 | |
| 100 | if (efx->phy_op->test_alive) { |
| 101 | rc = efx->phy_op->test_alive(efx); |
| 102 | tests->phy_alive = rc ? -1 : 1; |
| 103 | } |
| 104 | |
| 105 | return rc; |
| 106 | } |
| 107 | |
| 108 | static int efx_test_nvram(struct efx_nic *efx, struct efx_self_tests *tests) |
| 109 | { |
| 110 | int rc = 0; |
| 111 | |
| 112 | if (efx->type->test_nvram) { |
| 113 | rc = efx->type->test_nvram(efx); |
| 114 | if (rc == -EPERM) |
| 115 | rc = 0; |
| 116 | else |
| 117 | tests->nvram = rc ? -1 : 1; |
| 118 | } |
| 119 | |
| 120 | return rc; |
| 121 | } |
| 122 | |
| 123 | /************************************************************************** |
| 124 | * |
| 125 | * Interrupt and event queue testing |
| 126 | * |
| 127 | **************************************************************************/ |
| 128 | |
| 129 | /* Test generation and receipt of interrupts */ |
| 130 | static int efx_test_interrupts(struct efx_nic *efx, |
| 131 | struct efx_self_tests *tests) |
| 132 | { |
| 133 | unsigned long timeout, wait; |
| 134 | int cpu; |
| 135 | int rc; |
| 136 | |
| 137 | netif_dbg(efx, drv, efx->net_dev, "testing interrupts\n"); |
| 138 | tests->interrupt = -1; |
| 139 | |
| 140 | rc = efx_nic_irq_test_start(efx); |
| 141 | if (rc == -ENOTSUPP) { |
| 142 | netif_dbg(efx, drv, efx->net_dev, |
| 143 | "direct interrupt testing not supported\n"); |
| 144 | tests->interrupt = 0; |
| 145 | return 0; |
| 146 | } |
| 147 | |
| 148 | timeout = jiffies + IRQ_TIMEOUT; |
| 149 | wait = 1; |
| 150 | |
| 151 | /* Wait for arrival of test interrupt. */ |
| 152 | netif_dbg(efx, drv, efx->net_dev, "waiting for test interrupt\n"); |
| 153 | do { |
| 154 | schedule_timeout_uninterruptible(wait); |
| 155 | cpu = efx_nic_irq_test_irq_cpu(efx); |
| 156 | if (cpu >= 0) |
| 157 | goto success; |
| 158 | wait *= 2; |
| 159 | } while (time_before(jiffies, timeout)); |
| 160 | |
| 161 | netif_err(efx, drv, efx->net_dev, "timed out waiting for interrupt\n"); |
| 162 | return -ETIMEDOUT; |
| 163 | |
| 164 | success: |
| 165 | netif_dbg(efx, drv, efx->net_dev, "%s test interrupt seen on CPU%d\n", |
| 166 | INT_MODE(efx), cpu); |
| 167 | tests->interrupt = 1; |
| 168 | return 0; |
| 169 | } |
| 170 | |
| 171 | /* Test generation and receipt of interrupting events */ |
| 172 | static int efx_test_eventq_irq(struct efx_nic *efx, |
| 173 | struct efx_self_tests *tests) |
| 174 | { |
| 175 | struct efx_channel *channel; |
| 176 | unsigned int read_ptr[EFX_MAX_CHANNELS]; |
| 177 | unsigned long napi_ran = 0, dma_pend = 0, int_pend = 0; |
| 178 | unsigned long timeout, wait; |
| 179 | |
| 180 | BUILD_BUG_ON(EFX_MAX_CHANNELS > BITS_PER_LONG); |
| 181 | |
| 182 | efx_for_each_channel(channel, efx) { |
| 183 | read_ptr[channel->channel] = channel->eventq_read_ptr; |
| 184 | set_bit(channel->channel, &dma_pend); |
| 185 | set_bit(channel->channel, &int_pend); |
| 186 | efx_nic_event_test_start(channel); |
| 187 | } |
| 188 | |
| 189 | timeout = jiffies + IRQ_TIMEOUT; |
| 190 | wait = 1; |
| 191 | |
| 192 | /* Wait for arrival of interrupts. NAPI processing may or may |
| 193 | * not complete in time, but we can cope in any case. |
| 194 | */ |
| 195 | do { |
| 196 | schedule_timeout_uninterruptible(wait); |
| 197 | |
| 198 | efx_for_each_channel(channel, efx) { |
| 199 | efx_stop_eventq(channel); |
| 200 | if (channel->eventq_read_ptr != |
| 201 | read_ptr[channel->channel]) { |
| 202 | set_bit(channel->channel, &napi_ran); |
| 203 | clear_bit(channel->channel, &dma_pend); |
| 204 | clear_bit(channel->channel, &int_pend); |
| 205 | } else { |
| 206 | if (efx_nic_event_present(channel)) |
| 207 | clear_bit(channel->channel, &dma_pend); |
| 208 | if (efx_nic_event_test_irq_cpu(channel) >= 0) |
| 209 | clear_bit(channel->channel, &int_pend); |
| 210 | } |
| 211 | efx_start_eventq(channel); |
| 212 | } |
| 213 | |
| 214 | wait *= 2; |
| 215 | } while ((dma_pend || int_pend) && time_before(jiffies, timeout)); |
| 216 | |
| 217 | efx_for_each_channel(channel, efx) { |
| 218 | bool dma_seen = !test_bit(channel->channel, &dma_pend); |
| 219 | bool int_seen = !test_bit(channel->channel, &int_pend); |
| 220 | |
| 221 | tests->eventq_dma[channel->channel] = dma_seen ? 1 : -1; |
| 222 | tests->eventq_int[channel->channel] = int_seen ? 1 : -1; |
| 223 | |
| 224 | if (dma_seen && int_seen) { |
| 225 | netif_dbg(efx, drv, efx->net_dev, |
| 226 | "channel %d event queue passed (with%s NAPI)\n", |
| 227 | channel->channel, |
| 228 | test_bit(channel->channel, &napi_ran) ? |
| 229 | "" : "out"); |
| 230 | } else { |
| 231 | /* Report failure and whether either interrupt or DMA |
| 232 | * worked |
| 233 | */ |
| 234 | netif_err(efx, drv, efx->net_dev, |
| 235 | "channel %d timed out waiting for event queue\n", |
| 236 | channel->channel); |
| 237 | if (int_seen) |
| 238 | netif_err(efx, drv, efx->net_dev, |
| 239 | "channel %d saw interrupt " |
| 240 | "during event queue test\n", |
| 241 | channel->channel); |
| 242 | if (dma_seen) |
| 243 | netif_err(efx, drv, efx->net_dev, |
| 244 | "channel %d event was generated, but " |
| 245 | "failed to trigger an interrupt\n", |
| 246 | channel->channel); |
| 247 | } |
| 248 | } |
| 249 | |
| 250 | return (dma_pend || int_pend) ? -ETIMEDOUT : 0; |
| 251 | } |
| 252 | |
| 253 | static int efx_test_phy(struct efx_nic *efx, struct efx_self_tests *tests, |
| 254 | unsigned flags) |
| 255 | { |
| 256 | int rc; |
| 257 | |
| 258 | if (!efx->phy_op->run_tests) |
| 259 | return 0; |
| 260 | |
| 261 | mutex_lock(&efx->mac_lock); |
| 262 | rc = efx->phy_op->run_tests(efx, tests->phy_ext, flags); |
| 263 | mutex_unlock(&efx->mac_lock); |
| 264 | if (rc == -EPERM) |
| 265 | rc = 0; |
| 266 | else |
| 267 | netif_info(efx, drv, efx->net_dev, |
| 268 | "%s phy selftest\n", rc ? "Failed" : "Passed"); |
| 269 | |
| 270 | return rc; |
| 271 | } |
| 272 | |
| 273 | /************************************************************************** |
| 274 | * |
| 275 | * Loopback testing |
| 276 | * NB Only one loopback test can be executing concurrently. |
| 277 | * |
| 278 | **************************************************************************/ |
| 279 | |
| 280 | /* Loopback test RX callback |
| 281 | * This is called for each received packet during loopback testing. |
| 282 | */ |
| 283 | void efx_loopback_rx_packet(struct efx_nic *efx, |
| 284 | const char *buf_ptr, int pkt_len) |
| 285 | { |
| 286 | struct efx_loopback_state *state = efx->loopback_selftest; |
| 287 | struct efx_loopback_payload *received; |
| 288 | struct efx_loopback_payload *payload; |
| 289 | |
| 290 | BUG_ON(!buf_ptr); |
| 291 | |
| 292 | /* If we are just flushing, then drop the packet */ |
| 293 | if ((state == NULL) || state->flush) |
| 294 | return; |
| 295 | |
| 296 | payload = &state->payload; |
| 297 | |
| 298 | received = (struct efx_loopback_payload *) buf_ptr; |
| 299 | received->ip.saddr = payload->ip.saddr; |
| 300 | if (state->offload_csum) |
| 301 | received->ip.check = payload->ip.check; |
| 302 | |
| 303 | /* Check that header exists */ |
| 304 | if (pkt_len < sizeof(received->header)) { |
| 305 | netif_err(efx, drv, efx->net_dev, |
| 306 | "saw runt RX packet (length %d) in %s loopback " |
| 307 | "test\n", pkt_len, LOOPBACK_MODE(efx)); |
| 308 | goto err; |
| 309 | } |
| 310 | |
| 311 | /* Check that the ethernet header exists */ |
| 312 | if (memcmp(&received->header, &payload->header, ETH_HLEN) != 0) { |
| 313 | netif_err(efx, drv, efx->net_dev, |
| 314 | "saw non-loopback RX packet in %s loopback test\n", |
| 315 | LOOPBACK_MODE(efx)); |
| 316 | goto err; |
| 317 | } |
| 318 | |
| 319 | /* Check packet length */ |
| 320 | if (pkt_len != sizeof(*payload)) { |
| 321 | netif_err(efx, drv, efx->net_dev, |
| 322 | "saw incorrect RX packet length %d (wanted %d) in " |
| 323 | "%s loopback test\n", pkt_len, (int)sizeof(*payload), |
| 324 | LOOPBACK_MODE(efx)); |
| 325 | goto err; |
| 326 | } |
| 327 | |
| 328 | /* Check that IP header matches */ |
| 329 | if (memcmp(&received->ip, &payload->ip, sizeof(payload->ip)) != 0) { |
| 330 | netif_err(efx, drv, efx->net_dev, |
| 331 | "saw corrupted IP header in %s loopback test\n", |
| 332 | LOOPBACK_MODE(efx)); |
| 333 | goto err; |
| 334 | } |
| 335 | |
| 336 | /* Check that msg and padding matches */ |
| 337 | if (memcmp(&received->msg, &payload->msg, sizeof(received->msg)) != 0) { |
| 338 | netif_err(efx, drv, efx->net_dev, |
| 339 | "saw corrupted RX packet in %s loopback test\n", |
| 340 | LOOPBACK_MODE(efx)); |
| 341 | goto err; |
| 342 | } |
| 343 | |
| 344 | /* Check that iteration matches */ |
| 345 | if (received->iteration != payload->iteration) { |
| 346 | netif_err(efx, drv, efx->net_dev, |
| 347 | "saw RX packet from iteration %d (wanted %d) in " |
| 348 | "%s loopback test\n", ntohs(received->iteration), |
| 349 | ntohs(payload->iteration), LOOPBACK_MODE(efx)); |
| 350 | goto err; |
| 351 | } |
| 352 | |
| 353 | /* Increase correct RX count */ |
| 354 | netif_vdbg(efx, drv, efx->net_dev, |
| 355 | "got loopback RX in %s loopback test\n", LOOPBACK_MODE(efx)); |
| 356 | |
| 357 | atomic_inc(&state->rx_good); |
| 358 | return; |
| 359 | |
| 360 | err: |
| 361 | #ifdef DEBUG |
| 362 | if (atomic_read(&state->rx_bad) == 0) { |
| 363 | netif_err(efx, drv, efx->net_dev, "received packet:\n"); |
| 364 | print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 0x10, 1, |
| 365 | buf_ptr, pkt_len, 0); |
| 366 | netif_err(efx, drv, efx->net_dev, "expected packet:\n"); |
| 367 | print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 0x10, 1, |
| 368 | &state->payload, sizeof(state->payload), 0); |
| 369 | } |
| 370 | #endif |
| 371 | atomic_inc(&state->rx_bad); |
| 372 | } |
| 373 | |
| 374 | /* Initialise an efx_selftest_state for a new iteration */ |
| 375 | static void efx_iterate_state(struct efx_nic *efx) |
| 376 | { |
| 377 | struct efx_loopback_state *state = efx->loopback_selftest; |
| 378 | struct net_device *net_dev = efx->net_dev; |
| 379 | struct efx_loopback_payload *payload = &state->payload; |
| 380 | |
| 381 | /* Initialise the layerII header */ |
| 382 | ether_addr_copy((u8 *)&payload->header.h_dest, net_dev->dev_addr); |
| 383 | ether_addr_copy((u8 *)&payload->header.h_source, payload_source); |
| 384 | payload->header.h_proto = htons(ETH_P_IP); |
| 385 | |
| 386 | /* saddr set later and used as incrementing count */ |
| 387 | payload->ip.daddr = htonl(INADDR_LOOPBACK); |
| 388 | payload->ip.ihl = 5; |
| 389 | payload->ip.check = (__force __sum16) htons(0xdead); |
| 390 | payload->ip.tot_len = htons(sizeof(*payload) - sizeof(struct ethhdr)); |
| 391 | payload->ip.version = IPVERSION; |
| 392 | payload->ip.protocol = IPPROTO_UDP; |
| 393 | |
| 394 | /* Initialise udp header */ |
| 395 | payload->udp.source = 0; |
| 396 | payload->udp.len = htons(sizeof(*payload) - sizeof(struct ethhdr) - |
| 397 | sizeof(struct iphdr)); |
| 398 | payload->udp.check = 0; /* checksum ignored */ |
| 399 | |
| 400 | /* Fill out payload */ |
| 401 | payload->iteration = htons(ntohs(payload->iteration) + 1); |
| 402 | memcpy(&payload->msg, payload_msg, sizeof(payload_msg)); |
| 403 | |
| 404 | /* Fill out remaining state members */ |
| 405 | atomic_set(&state->rx_good, 0); |
| 406 | atomic_set(&state->rx_bad, 0); |
| 407 | smp_wmb(); |
| 408 | } |
| 409 | |
| 410 | static int efx_begin_loopback(struct efx_tx_queue *tx_queue) |
| 411 | { |
| 412 | struct efx_nic *efx = tx_queue->efx; |
| 413 | struct efx_loopback_state *state = efx->loopback_selftest; |
| 414 | struct efx_loopback_payload *payload; |
| 415 | struct sk_buff *skb; |
| 416 | int i; |
| 417 | netdev_tx_t rc; |
| 418 | |
| 419 | /* Transmit N copies of buffer */ |
| 420 | for (i = 0; i < state->packet_count; i++) { |
| 421 | /* Allocate an skb, holding an extra reference for |
| 422 | * transmit completion counting */ |
| 423 | skb = alloc_skb(sizeof(state->payload), GFP_KERNEL); |
| 424 | if (!skb) |
| 425 | return -ENOMEM; |
| 426 | state->skbs[i] = skb; |
| 427 | skb_get(skb); |
| 428 | |
| 429 | /* Copy the payload in, incrementing the source address to |
| 430 | * exercise the rss vectors */ |
| 431 | payload = skb_put(skb, sizeof(state->payload)); |
| 432 | memcpy(payload, &state->payload, sizeof(state->payload)); |
| 433 | payload->ip.saddr = htonl(INADDR_LOOPBACK | (i << 2)); |
| 434 | |
| 435 | /* Ensure everything we've written is visible to the |
| 436 | * interrupt handler. */ |
| 437 | smp_wmb(); |
| 438 | |
| 439 | netif_tx_lock_bh(efx->net_dev); |
| 440 | rc = efx_enqueue_skb(tx_queue, skb); |
| 441 | netif_tx_unlock_bh(efx->net_dev); |
| 442 | |
| 443 | if (rc != NETDEV_TX_OK) { |
| 444 | netif_err(efx, drv, efx->net_dev, |
| 445 | "TX queue %d could not transmit packet %d of " |
| 446 | "%d in %s loopback test\n", tx_queue->queue, |
| 447 | i + 1, state->packet_count, |
| 448 | LOOPBACK_MODE(efx)); |
| 449 | |
| 450 | /* Defer cleaning up the other skbs for the caller */ |
| 451 | kfree_skb(skb); |
| 452 | return -EPIPE; |
| 453 | } |
| 454 | } |
| 455 | |
| 456 | return 0; |
| 457 | } |
| 458 | |
| 459 | static int efx_poll_loopback(struct efx_nic *efx) |
| 460 | { |
| 461 | struct efx_loopback_state *state = efx->loopback_selftest; |
| 462 | |
| 463 | return atomic_read(&state->rx_good) == state->packet_count; |
| 464 | } |
| 465 | |
| 466 | static int efx_end_loopback(struct efx_tx_queue *tx_queue, |
| 467 | struct efx_loopback_self_tests *lb_tests) |
| 468 | { |
| 469 | struct efx_nic *efx = tx_queue->efx; |
| 470 | struct efx_loopback_state *state = efx->loopback_selftest; |
| 471 | struct sk_buff *skb; |
| 472 | int tx_done = 0, rx_good, rx_bad; |
| 473 | int i, rc = 0; |
| 474 | |
| 475 | netif_tx_lock_bh(efx->net_dev); |
| 476 | |
| 477 | /* Count the number of tx completions, and decrement the refcnt. Any |
| 478 | * skbs not already completed will be free'd when the queue is flushed */ |
| 479 | for (i = 0; i < state->packet_count; i++) { |
| 480 | skb = state->skbs[i]; |
| 481 | if (skb && !skb_shared(skb)) |
| 482 | ++tx_done; |
| 483 | dev_kfree_skb(skb); |
| 484 | } |
| 485 | |
| 486 | netif_tx_unlock_bh(efx->net_dev); |
| 487 | |
| 488 | /* Check TX completion and received packet counts */ |
| 489 | rx_good = atomic_read(&state->rx_good); |
| 490 | rx_bad = atomic_read(&state->rx_bad); |
| 491 | if (tx_done != state->packet_count) { |
| 492 | /* Don't free the skbs; they will be picked up on TX |
| 493 | * overflow or channel teardown. |
| 494 | */ |
| 495 | netif_err(efx, drv, efx->net_dev, |
| 496 | "TX queue %d saw only %d out of an expected %d " |
| 497 | "TX completion events in %s loopback test\n", |
| 498 | tx_queue->queue, tx_done, state->packet_count, |
| 499 | LOOPBACK_MODE(efx)); |
| 500 | rc = -ETIMEDOUT; |
| 501 | /* Allow to fall through so we see the RX errors as well */ |
| 502 | } |
| 503 | |
| 504 | /* We may always be up to a flush away from our desired packet total */ |
| 505 | if (rx_good != state->packet_count) { |
| 506 | netif_dbg(efx, drv, efx->net_dev, |
| 507 | "TX queue %d saw only %d out of an expected %d " |
| 508 | "received packets in %s loopback test\n", |
| 509 | tx_queue->queue, rx_good, state->packet_count, |
| 510 | LOOPBACK_MODE(efx)); |
| 511 | rc = -ETIMEDOUT; |
| 512 | /* Fall through */ |
| 513 | } |
| 514 | |
| 515 | /* Update loopback test structure */ |
| 516 | lb_tests->tx_sent[tx_queue->queue] += state->packet_count; |
| 517 | lb_tests->tx_done[tx_queue->queue] += tx_done; |
| 518 | lb_tests->rx_good += rx_good; |
| 519 | lb_tests->rx_bad += rx_bad; |
| 520 | |
| 521 | return rc; |
| 522 | } |
| 523 | |
| 524 | static int |
| 525 | efx_test_loopback(struct efx_tx_queue *tx_queue, |
| 526 | struct efx_loopback_self_tests *lb_tests) |
| 527 | { |
| 528 | struct efx_nic *efx = tx_queue->efx; |
| 529 | struct efx_loopback_state *state = efx->loopback_selftest; |
| 530 | int i, begin_rc, end_rc; |
| 531 | |
| 532 | for (i = 0; i < 3; i++) { |
| 533 | /* Determine how many packets to send */ |
| 534 | state->packet_count = efx->txq_entries / 3; |
| 535 | state->packet_count = min(1 << (i << 2), state->packet_count); |
| 536 | state->skbs = kcalloc(state->packet_count, |
| 537 | sizeof(state->skbs[0]), GFP_KERNEL); |
| 538 | if (!state->skbs) |
| 539 | return -ENOMEM; |
| 540 | state->flush = false; |
| 541 | |
| 542 | netif_dbg(efx, drv, efx->net_dev, |
| 543 | "TX queue %d testing %s loopback with %d packets\n", |
| 544 | tx_queue->queue, LOOPBACK_MODE(efx), |
| 545 | state->packet_count); |
| 546 | |
| 547 | efx_iterate_state(efx); |
| 548 | begin_rc = efx_begin_loopback(tx_queue); |
| 549 | |
| 550 | /* This will normally complete very quickly, but be |
| 551 | * prepared to wait much longer. */ |
| 552 | msleep(1); |
| 553 | if (!efx_poll_loopback(efx)) { |
| 554 | msleep(LOOPBACK_TIMEOUT_MS); |
| 555 | efx_poll_loopback(efx); |
| 556 | } |
| 557 | |
| 558 | end_rc = efx_end_loopback(tx_queue, lb_tests); |
| 559 | kfree(state->skbs); |
| 560 | |
| 561 | if (begin_rc || end_rc) { |
| 562 | /* Wait a while to ensure there are no packets |
| 563 | * floating around after a failure. */ |
| 564 | schedule_timeout_uninterruptible(HZ / 10); |
| 565 | return begin_rc ? begin_rc : end_rc; |
| 566 | } |
| 567 | } |
| 568 | |
| 569 | netif_dbg(efx, drv, efx->net_dev, |
| 570 | "TX queue %d passed %s loopback test with a burst length " |
| 571 | "of %d packets\n", tx_queue->queue, LOOPBACK_MODE(efx), |
| 572 | state->packet_count); |
| 573 | |
| 574 | return 0; |
| 575 | } |
| 576 | |
| 577 | /* Wait for link up. On Falcon, we would prefer to rely on efx_monitor, but |
| 578 | * any contention on the mac lock (via e.g. efx_mac_mcast_work) causes it |
| 579 | * to delay and retry. Therefore, it's safer to just poll directly. Wait |
| 580 | * for link up and any faults to dissipate. */ |
| 581 | static int efx_wait_for_link(struct efx_nic *efx) |
| 582 | { |
| 583 | struct efx_link_state *link_state = &efx->link_state; |
| 584 | int count, link_up_count = 0; |
| 585 | bool link_up; |
| 586 | |
| 587 | for (count = 0; count < 40; count++) { |
| 588 | schedule_timeout_uninterruptible(HZ / 10); |
| 589 | |
| 590 | if (efx->type->monitor != NULL) { |
| 591 | mutex_lock(&efx->mac_lock); |
| 592 | efx->type->monitor(efx); |
| 593 | mutex_unlock(&efx->mac_lock); |
| 594 | } |
| 595 | |
| 596 | mutex_lock(&efx->mac_lock); |
| 597 | link_up = link_state->up; |
| 598 | if (link_up) |
| 599 | link_up = !efx->type->check_mac_fault(efx); |
| 600 | mutex_unlock(&efx->mac_lock); |
| 601 | |
| 602 | if (link_up) { |
| 603 | if (++link_up_count == 2) |
| 604 | return 0; |
| 605 | } else { |
| 606 | link_up_count = 0; |
| 607 | } |
| 608 | } |
| 609 | |
| 610 | return -ETIMEDOUT; |
| 611 | } |
| 612 | |
| 613 | static int efx_test_loopbacks(struct efx_nic *efx, struct efx_self_tests *tests, |
| 614 | unsigned int loopback_modes) |
| 615 | { |
| 616 | enum efx_loopback_mode mode; |
| 617 | struct efx_loopback_state *state; |
| 618 | struct efx_channel *channel = |
| 619 | efx_get_channel(efx, efx->tx_channel_offset); |
| 620 | struct efx_tx_queue *tx_queue; |
| 621 | int rc = 0; |
| 622 | |
| 623 | /* Set the port loopback_selftest member. From this point on |
| 624 | * all received packets will be dropped. Mark the state as |
| 625 | * "flushing" so all inflight packets are dropped */ |
| 626 | state = kzalloc(sizeof(*state), GFP_KERNEL); |
| 627 | if (state == NULL) |
| 628 | return -ENOMEM; |
| 629 | BUG_ON(efx->loopback_selftest); |
| 630 | state->flush = true; |
| 631 | efx->loopback_selftest = state; |
| 632 | |
| 633 | /* Test all supported loopback modes */ |
| 634 | for (mode = LOOPBACK_NONE; mode <= LOOPBACK_TEST_MAX; mode++) { |
| 635 | if (!(loopback_modes & (1 << mode))) |
| 636 | continue; |
| 637 | |
| 638 | /* Move the port into the specified loopback mode. */ |
| 639 | state->flush = true; |
| 640 | mutex_lock(&efx->mac_lock); |
| 641 | efx->loopback_mode = mode; |
| 642 | rc = __efx_reconfigure_port(efx); |
| 643 | mutex_unlock(&efx->mac_lock); |
| 644 | if (rc) { |
| 645 | netif_err(efx, drv, efx->net_dev, |
| 646 | "unable to move into %s loopback\n", |
| 647 | LOOPBACK_MODE(efx)); |
| 648 | goto out; |
| 649 | } |
| 650 | |
| 651 | rc = efx_wait_for_link(efx); |
| 652 | if (rc) { |
| 653 | netif_err(efx, drv, efx->net_dev, |
| 654 | "loopback %s never came up\n", |
| 655 | LOOPBACK_MODE(efx)); |
| 656 | goto out; |
| 657 | } |
| 658 | |
| 659 | /* Test all enabled types of TX queue */ |
| 660 | efx_for_each_channel_tx_queue(tx_queue, channel) { |
| 661 | state->offload_csum = (tx_queue->queue & |
| 662 | EFX_TXQ_TYPE_OFFLOAD); |
| 663 | rc = efx_test_loopback(tx_queue, |
| 664 | &tests->loopback[mode]); |
| 665 | if (rc) |
| 666 | goto out; |
| 667 | } |
| 668 | } |
| 669 | |
| 670 | out: |
| 671 | /* Remove the flush. The caller will remove the loopback setting */ |
| 672 | state->flush = true; |
| 673 | efx->loopback_selftest = NULL; |
| 674 | wmb(); |
| 675 | kfree(state); |
| 676 | |
| 677 | if (rc == -EPERM) |
| 678 | rc = 0; |
| 679 | |
| 680 | return rc; |
| 681 | } |
| 682 | |
| 683 | /************************************************************************** |
| 684 | * |
| 685 | * Entry point |
| 686 | * |
| 687 | *************************************************************************/ |
| 688 | |
| 689 | int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, |
| 690 | unsigned flags) |
| 691 | { |
| 692 | enum efx_loopback_mode loopback_mode = efx->loopback_mode; |
| 693 | int phy_mode = efx->phy_mode; |
| 694 | int rc_test = 0, rc_reset, rc; |
| 695 | |
| 696 | efx_selftest_async_cancel(efx); |
| 697 | |
| 698 | /* Online (i.e. non-disruptive) testing |
| 699 | * This checks interrupt generation, event delivery and PHY presence. */ |
| 700 | |
| 701 | rc = efx_test_phy_alive(efx, tests); |
| 702 | if (rc && !rc_test) |
| 703 | rc_test = rc; |
| 704 | |
| 705 | rc = efx_test_nvram(efx, tests); |
| 706 | if (rc && !rc_test) |
| 707 | rc_test = rc; |
| 708 | |
| 709 | rc = efx_test_interrupts(efx, tests); |
| 710 | if (rc && !rc_test) |
| 711 | rc_test = rc; |
| 712 | |
| 713 | rc = efx_test_eventq_irq(efx, tests); |
| 714 | if (rc && !rc_test) |
| 715 | rc_test = rc; |
| 716 | |
| 717 | if (rc_test) |
| 718 | return rc_test; |
| 719 | |
| 720 | if (!(flags & ETH_TEST_FL_OFFLINE)) |
| 721 | return efx_test_phy(efx, tests, flags); |
| 722 | |
| 723 | /* Offline (i.e. disruptive) testing |
| 724 | * This checks MAC and PHY loopback on the specified port. */ |
| 725 | |
| 726 | /* Detach the device so the kernel doesn't transmit during the |
| 727 | * loopback test and the watchdog timeout doesn't fire. |
| 728 | */ |
| 729 | efx_device_detach_sync(efx); |
| 730 | |
| 731 | if (efx->type->test_chip) { |
| 732 | rc_reset = efx->type->test_chip(efx, tests); |
| 733 | if (rc_reset) { |
| 734 | netif_err(efx, hw, efx->net_dev, |
| 735 | "Unable to recover from chip test\n"); |
| 736 | efx_schedule_reset(efx, RESET_TYPE_DISABLE); |
| 737 | return rc_reset; |
| 738 | } |
| 739 | |
| 740 | if ((tests->memory < 0 || tests->registers < 0) && !rc_test) |
| 741 | rc_test = -EIO; |
| 742 | } |
| 743 | |
| 744 | /* Ensure that the phy is powered and out of loopback |
| 745 | * for the bist and loopback tests */ |
| 746 | mutex_lock(&efx->mac_lock); |
| 747 | efx->phy_mode &= ~PHY_MODE_LOW_POWER; |
| 748 | efx->loopback_mode = LOOPBACK_NONE; |
| 749 | __efx_reconfigure_port(efx); |
| 750 | mutex_unlock(&efx->mac_lock); |
| 751 | |
| 752 | rc = efx_test_phy(efx, tests, flags); |
| 753 | if (rc && !rc_test) |
| 754 | rc_test = rc; |
| 755 | |
| 756 | rc = efx_test_loopbacks(efx, tests, efx->loopback_modes); |
| 757 | if (rc && !rc_test) |
| 758 | rc_test = rc; |
| 759 | |
| 760 | /* restore the PHY to the previous state */ |
| 761 | mutex_lock(&efx->mac_lock); |
| 762 | efx->phy_mode = phy_mode; |
| 763 | efx->loopback_mode = loopback_mode; |
| 764 | __efx_reconfigure_port(efx); |
| 765 | mutex_unlock(&efx->mac_lock); |
| 766 | |
| 767 | efx_device_attach_if_not_resetting(efx); |
| 768 | |
| 769 | return rc_test; |
| 770 | } |
| 771 | |
| 772 | void efx_selftest_async_start(struct efx_nic *efx) |
| 773 | { |
| 774 | struct efx_channel *channel; |
| 775 | |
| 776 | efx_for_each_channel(channel, efx) |
| 777 | efx_nic_event_test_start(channel); |
| 778 | schedule_delayed_work(&efx->selftest_work, IRQ_TIMEOUT); |
| 779 | } |
| 780 | |
| 781 | void efx_selftest_async_cancel(struct efx_nic *efx) |
| 782 | { |
| 783 | cancel_delayed_work_sync(&efx->selftest_work); |
| 784 | } |
| 785 | |
| 786 | void efx_selftest_async_work(struct work_struct *data) |
| 787 | { |
| 788 | struct efx_nic *efx = container_of(data, struct efx_nic, |
| 789 | selftest_work.work); |
| 790 | struct efx_channel *channel; |
| 791 | int cpu; |
| 792 | |
| 793 | efx_for_each_channel(channel, efx) { |
| 794 | cpu = efx_nic_event_test_irq_cpu(channel); |
| 795 | if (cpu < 0) |
| 796 | netif_err(efx, ifup, efx->net_dev, |
| 797 | "channel %d failed to trigger an interrupt\n", |
| 798 | channel->channel); |
| 799 | else |
| 800 | netif_dbg(efx, ifup, efx->net_dev, |
| 801 | "channel %d triggered interrupt on CPU %d\n", |
| 802 | channel->channel, cpu); |
| 803 | } |
| 804 | } |