David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * linux/drivers/input/serio/sa1111ps2.c |
| 4 | * |
| 5 | * Copyright (C) 2002 Russell King |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 6 | */ |
| 7 | #include <linux/module.h> |
| 8 | #include <linux/init.h> |
| 9 | #include <linux/input.h> |
| 10 | #include <linux/serio.h> |
| 11 | #include <linux/errno.h> |
| 12 | #include <linux/interrupt.h> |
| 13 | #include <linux/ioport.h> |
| 14 | #include <linux/delay.h> |
| 15 | #include <linux/device.h> |
| 16 | #include <linux/slab.h> |
| 17 | #include <linux/spinlock.h> |
| 18 | |
| 19 | #include <asm/io.h> |
| 20 | |
| 21 | #include <asm/hardware/sa1111.h> |
| 22 | |
| 23 | #define PS2CR 0x0000 |
| 24 | #define PS2STAT 0x0004 |
| 25 | #define PS2DATA 0x0008 |
| 26 | #define PS2CLKDIV 0x000c |
| 27 | #define PS2PRECNT 0x0010 |
| 28 | |
| 29 | #define PS2CR_ENA 0x08 |
| 30 | #define PS2CR_FKD 0x02 |
| 31 | #define PS2CR_FKC 0x01 |
| 32 | |
| 33 | #define PS2STAT_STP 0x0100 |
| 34 | #define PS2STAT_TXE 0x0080 |
| 35 | #define PS2STAT_TXB 0x0040 |
| 36 | #define PS2STAT_RXF 0x0020 |
| 37 | #define PS2STAT_RXB 0x0010 |
| 38 | #define PS2STAT_ENA 0x0008 |
| 39 | #define PS2STAT_RXP 0x0004 |
| 40 | #define PS2STAT_KBD 0x0002 |
| 41 | #define PS2STAT_KBC 0x0001 |
| 42 | |
| 43 | struct ps2if { |
| 44 | struct serio *io; |
| 45 | struct sa1111_dev *dev; |
| 46 | void __iomem *base; |
| 47 | int rx_irq; |
| 48 | int tx_irq; |
| 49 | unsigned int open; |
| 50 | spinlock_t lock; |
| 51 | unsigned int head; |
| 52 | unsigned int tail; |
| 53 | unsigned char buf[4]; |
| 54 | }; |
| 55 | |
| 56 | /* |
| 57 | * Read all bytes waiting in the PS2 port. There should be |
| 58 | * at the most one, but we loop for safety. If there was a |
| 59 | * framing error, we have to manually clear the status. |
| 60 | */ |
| 61 | static irqreturn_t ps2_rxint(int irq, void *dev_id) |
| 62 | { |
| 63 | struct ps2if *ps2if = dev_id; |
| 64 | unsigned int scancode, flag, status; |
| 65 | |
| 66 | status = readl_relaxed(ps2if->base + PS2STAT); |
| 67 | while (status & PS2STAT_RXF) { |
| 68 | if (status & PS2STAT_STP) |
| 69 | writel_relaxed(PS2STAT_STP, ps2if->base + PS2STAT); |
| 70 | |
| 71 | flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) | |
| 72 | (status & PS2STAT_RXP ? 0 : SERIO_PARITY); |
| 73 | |
| 74 | scancode = readl_relaxed(ps2if->base + PS2DATA) & 0xff; |
| 75 | |
| 76 | if (hweight8(scancode) & 1) |
| 77 | flag ^= SERIO_PARITY; |
| 78 | |
| 79 | serio_interrupt(ps2if->io, scancode, flag); |
| 80 | |
| 81 | status = readl_relaxed(ps2if->base + PS2STAT); |
| 82 | } |
| 83 | |
| 84 | return IRQ_HANDLED; |
| 85 | } |
| 86 | |
| 87 | /* |
| 88 | * Completion of ps2 write |
| 89 | */ |
| 90 | static irqreturn_t ps2_txint(int irq, void *dev_id) |
| 91 | { |
| 92 | struct ps2if *ps2if = dev_id; |
| 93 | unsigned int status; |
| 94 | |
| 95 | spin_lock(&ps2if->lock); |
| 96 | status = readl_relaxed(ps2if->base + PS2STAT); |
| 97 | if (ps2if->head == ps2if->tail) { |
| 98 | disable_irq_nosync(irq); |
| 99 | /* done */ |
| 100 | } else if (status & PS2STAT_TXE) { |
| 101 | writel_relaxed(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA); |
| 102 | ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1); |
| 103 | } |
| 104 | spin_unlock(&ps2if->lock); |
| 105 | |
| 106 | return IRQ_HANDLED; |
| 107 | } |
| 108 | |
| 109 | /* |
| 110 | * Write a byte to the PS2 port. We have to wait for the |
| 111 | * port to indicate that the transmitter is empty. |
| 112 | */ |
| 113 | static int ps2_write(struct serio *io, unsigned char val) |
| 114 | { |
| 115 | struct ps2if *ps2if = io->port_data; |
| 116 | unsigned long flags; |
| 117 | unsigned int head; |
| 118 | |
| 119 | spin_lock_irqsave(&ps2if->lock, flags); |
| 120 | |
| 121 | /* |
| 122 | * If the TX register is empty, we can go straight out. |
| 123 | */ |
| 124 | if (readl_relaxed(ps2if->base + PS2STAT) & PS2STAT_TXE) { |
| 125 | writel_relaxed(val, ps2if->base + PS2DATA); |
| 126 | } else { |
| 127 | if (ps2if->head == ps2if->tail) |
| 128 | enable_irq(ps2if->tx_irq); |
| 129 | head = (ps2if->head + 1) & (sizeof(ps2if->buf) - 1); |
| 130 | if (head != ps2if->tail) { |
| 131 | ps2if->buf[ps2if->head] = val; |
| 132 | ps2if->head = head; |
| 133 | } |
| 134 | } |
| 135 | |
| 136 | spin_unlock_irqrestore(&ps2if->lock, flags); |
| 137 | return 0; |
| 138 | } |
| 139 | |
| 140 | static int ps2_open(struct serio *io) |
| 141 | { |
| 142 | struct ps2if *ps2if = io->port_data; |
| 143 | int ret; |
| 144 | |
| 145 | ret = sa1111_enable_device(ps2if->dev); |
| 146 | if (ret) |
| 147 | return ret; |
| 148 | |
| 149 | ret = request_irq(ps2if->rx_irq, ps2_rxint, 0, |
| 150 | SA1111_DRIVER_NAME(ps2if->dev), ps2if); |
| 151 | if (ret) { |
| 152 | printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", |
| 153 | ps2if->rx_irq, ret); |
| 154 | sa1111_disable_device(ps2if->dev); |
| 155 | return ret; |
| 156 | } |
| 157 | |
| 158 | ret = request_irq(ps2if->tx_irq, ps2_txint, 0, |
| 159 | SA1111_DRIVER_NAME(ps2if->dev), ps2if); |
| 160 | if (ret) { |
| 161 | printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", |
| 162 | ps2if->tx_irq, ret); |
| 163 | free_irq(ps2if->rx_irq, ps2if); |
| 164 | sa1111_disable_device(ps2if->dev); |
| 165 | return ret; |
| 166 | } |
| 167 | |
| 168 | ps2if->open = 1; |
| 169 | |
| 170 | enable_irq_wake(ps2if->rx_irq); |
| 171 | |
| 172 | writel_relaxed(PS2CR_ENA, ps2if->base + PS2CR); |
| 173 | return 0; |
| 174 | } |
| 175 | |
| 176 | static void ps2_close(struct serio *io) |
| 177 | { |
| 178 | struct ps2if *ps2if = io->port_data; |
| 179 | |
| 180 | writel_relaxed(0, ps2if->base + PS2CR); |
| 181 | |
| 182 | disable_irq_wake(ps2if->rx_irq); |
| 183 | |
| 184 | ps2if->open = 0; |
| 185 | |
| 186 | free_irq(ps2if->tx_irq, ps2if); |
| 187 | free_irq(ps2if->rx_irq, ps2if); |
| 188 | |
| 189 | sa1111_disable_device(ps2if->dev); |
| 190 | } |
| 191 | |
| 192 | /* |
| 193 | * Clear the input buffer. |
| 194 | */ |
| 195 | static void ps2_clear_input(struct ps2if *ps2if) |
| 196 | { |
| 197 | int maxread = 100; |
| 198 | |
| 199 | while (maxread--) { |
| 200 | if ((readl_relaxed(ps2if->base + PS2DATA) & 0xff) == 0xff) |
| 201 | break; |
| 202 | } |
| 203 | } |
| 204 | |
| 205 | static unsigned int ps2_test_one(struct ps2if *ps2if, |
| 206 | unsigned int mask) |
| 207 | { |
| 208 | unsigned int val; |
| 209 | |
| 210 | writel_relaxed(PS2CR_ENA | mask, ps2if->base + PS2CR); |
| 211 | |
| 212 | udelay(10); |
| 213 | |
| 214 | val = readl_relaxed(ps2if->base + PS2STAT); |
| 215 | return val & (PS2STAT_KBC | PS2STAT_KBD); |
| 216 | } |
| 217 | |
| 218 | /* |
| 219 | * Test the keyboard interface. We basically check to make sure that |
| 220 | * we can drive each line to the keyboard independently of each other. |
| 221 | */ |
| 222 | static int ps2_test(struct ps2if *ps2if) |
| 223 | { |
| 224 | unsigned int stat; |
| 225 | int ret = 0; |
| 226 | |
| 227 | stat = ps2_test_one(ps2if, PS2CR_FKC); |
| 228 | if (stat != PS2STAT_KBD) { |
| 229 | printk("PS/2 interface test failed[1]: %02x\n", stat); |
| 230 | ret = -ENODEV; |
| 231 | } |
| 232 | |
| 233 | stat = ps2_test_one(ps2if, 0); |
| 234 | if (stat != (PS2STAT_KBC | PS2STAT_KBD)) { |
| 235 | printk("PS/2 interface test failed[2]: %02x\n", stat); |
| 236 | ret = -ENODEV; |
| 237 | } |
| 238 | |
| 239 | stat = ps2_test_one(ps2if, PS2CR_FKD); |
| 240 | if (stat != PS2STAT_KBC) { |
| 241 | printk("PS/2 interface test failed[3]: %02x\n", stat); |
| 242 | ret = -ENODEV; |
| 243 | } |
| 244 | |
| 245 | writel_relaxed(0, ps2if->base + PS2CR); |
| 246 | |
| 247 | return ret; |
| 248 | } |
| 249 | |
| 250 | /* |
| 251 | * Add one device to this driver. |
| 252 | */ |
| 253 | static int ps2_probe(struct sa1111_dev *dev) |
| 254 | { |
| 255 | struct ps2if *ps2if; |
| 256 | struct serio *serio; |
| 257 | int ret; |
| 258 | |
| 259 | ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL); |
| 260 | serio = kzalloc(sizeof(struct serio), GFP_KERNEL); |
| 261 | if (!ps2if || !serio) { |
| 262 | ret = -ENOMEM; |
| 263 | goto free; |
| 264 | } |
| 265 | |
| 266 | serio->id.type = SERIO_8042; |
| 267 | serio->write = ps2_write; |
| 268 | serio->open = ps2_open; |
| 269 | serio->close = ps2_close; |
| 270 | strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name)); |
| 271 | strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys)); |
| 272 | serio->port_data = ps2if; |
| 273 | serio->dev.parent = &dev->dev; |
| 274 | ps2if->io = serio; |
| 275 | ps2if->dev = dev; |
| 276 | sa1111_set_drvdata(dev, ps2if); |
| 277 | |
| 278 | spin_lock_init(&ps2if->lock); |
| 279 | |
| 280 | ps2if->rx_irq = sa1111_get_irq(dev, 0); |
| 281 | if (ps2if->rx_irq <= 0) { |
| 282 | ret = ps2if->rx_irq ? : -ENXIO; |
| 283 | goto free; |
| 284 | } |
| 285 | |
| 286 | ps2if->tx_irq = sa1111_get_irq(dev, 1); |
| 287 | if (ps2if->tx_irq <= 0) { |
| 288 | ret = ps2if->tx_irq ? : -ENXIO; |
| 289 | goto free; |
| 290 | } |
| 291 | |
| 292 | /* |
| 293 | * Request the physical region for this PS2 port. |
| 294 | */ |
| 295 | if (!request_mem_region(dev->res.start, |
| 296 | dev->res.end - dev->res.start + 1, |
| 297 | SA1111_DRIVER_NAME(dev))) { |
| 298 | ret = -EBUSY; |
| 299 | goto free; |
| 300 | } |
| 301 | |
| 302 | /* |
| 303 | * Our parent device has already mapped the region. |
| 304 | */ |
| 305 | ps2if->base = dev->mapbase; |
| 306 | |
| 307 | sa1111_enable_device(ps2if->dev); |
| 308 | |
| 309 | /* Incoming clock is 8MHz */ |
| 310 | writel_relaxed(0, ps2if->base + PS2CLKDIV); |
| 311 | writel_relaxed(127, ps2if->base + PS2PRECNT); |
| 312 | |
| 313 | /* |
| 314 | * Flush any pending input. |
| 315 | */ |
| 316 | ps2_clear_input(ps2if); |
| 317 | |
| 318 | /* |
| 319 | * Test the keyboard interface. |
| 320 | */ |
| 321 | ret = ps2_test(ps2if); |
| 322 | if (ret) |
| 323 | goto out; |
| 324 | |
| 325 | /* |
| 326 | * Flush any pending input. |
| 327 | */ |
| 328 | ps2_clear_input(ps2if); |
| 329 | |
| 330 | sa1111_disable_device(ps2if->dev); |
| 331 | serio_register_port(ps2if->io); |
| 332 | return 0; |
| 333 | |
| 334 | out: |
| 335 | sa1111_disable_device(ps2if->dev); |
| 336 | release_mem_region(dev->res.start, resource_size(&dev->res)); |
| 337 | free: |
| 338 | sa1111_set_drvdata(dev, NULL); |
| 339 | kfree(ps2if); |
| 340 | kfree(serio); |
| 341 | return ret; |
| 342 | } |
| 343 | |
| 344 | /* |
| 345 | * Remove one device from this driver. |
| 346 | */ |
| 347 | static int ps2_remove(struct sa1111_dev *dev) |
| 348 | { |
| 349 | struct ps2if *ps2if = sa1111_get_drvdata(dev); |
| 350 | |
| 351 | serio_unregister_port(ps2if->io); |
| 352 | release_mem_region(dev->res.start, resource_size(&dev->res)); |
| 353 | sa1111_set_drvdata(dev, NULL); |
| 354 | |
| 355 | kfree(ps2if); |
| 356 | |
| 357 | return 0; |
| 358 | } |
| 359 | |
| 360 | /* |
| 361 | * Our device driver structure |
| 362 | */ |
| 363 | static struct sa1111_driver ps2_driver = { |
| 364 | .drv = { |
| 365 | .name = "sa1111-ps2", |
| 366 | .owner = THIS_MODULE, |
| 367 | }, |
| 368 | .devid = SA1111_DEVID_PS2, |
| 369 | .probe = ps2_probe, |
| 370 | .remove = ps2_remove, |
| 371 | }; |
| 372 | |
| 373 | static int __init ps2_init(void) |
| 374 | { |
| 375 | return sa1111_driver_register(&ps2_driver); |
| 376 | } |
| 377 | |
| 378 | static void __exit ps2_exit(void) |
| 379 | { |
| 380 | sa1111_driver_unregister(&ps2_driver); |
| 381 | } |
| 382 | |
| 383 | module_init(ps2_init); |
| 384 | module_exit(ps2_exit); |
| 385 | |
| 386 | MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); |
| 387 | MODULE_DESCRIPTION("SA1111 PS2 controller driver"); |
| 388 | MODULE_LICENSE("GPL"); |