David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * i2c_adap_pxa.c |
| 4 | * |
| 5 | * I2C adapter for the PXA I2C bus access. |
| 6 | * |
| 7 | * Copyright (C) 2002 Intrinsyc Software Inc. |
| 8 | * Copyright (C) 2004-2005 Deep Blue Solutions Ltd. |
| 9 | * |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 10 | * History: |
| 11 | * Apr 2002: Initial version [CS] |
| 12 | * Jun 2002: Properly separated algo/adap [FB] |
| 13 | * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] |
| 14 | * Jan 2003: added limited signal handling [Kai-Uwe Bloem] |
| 15 | * Sep 2004: Major rework to ensure efficient bus handling [RMK] |
| 16 | * Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood] |
| 17 | * Feb 2005: Rework slave mode handling [RMK] |
| 18 | */ |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/i2c.h> |
| 22 | #include <linux/init.h> |
| 23 | #include <linux/time.h> |
| 24 | #include <linux/sched.h> |
| 25 | #include <linux/delay.h> |
| 26 | #include <linux/errno.h> |
| 27 | #include <linux/interrupt.h> |
| 28 | #include <linux/i2c-pxa.h> |
| 29 | #include <linux/of.h> |
| 30 | #include <linux/of_device.h> |
| 31 | #include <linux/platform_device.h> |
| 32 | #include <linux/err.h> |
| 33 | #include <linux/clk.h> |
| 34 | #include <linux/slab.h> |
| 35 | #include <linux/io.h> |
| 36 | #include <linux/platform_data/i2c-pxa.h> |
| 37 | |
| 38 | #include <asm/irq.h> |
| 39 | |
| 40 | struct pxa_reg_layout { |
| 41 | u32 ibmr; |
| 42 | u32 idbr; |
| 43 | u32 icr; |
| 44 | u32 isr; |
| 45 | u32 isar; |
| 46 | u32 ilcr; |
| 47 | u32 iwcr; |
| 48 | u32 fm; |
| 49 | u32 hs; |
| 50 | }; |
| 51 | |
| 52 | enum pxa_i2c_types { |
| 53 | REGS_PXA2XX, |
| 54 | REGS_PXA3XX, |
| 55 | REGS_CE4100, |
| 56 | REGS_PXA910, |
| 57 | REGS_A3700, |
| 58 | }; |
| 59 | |
| 60 | #define ICR_BUSMODE_FM (1 << 16) /* shifted fast mode for armada-3700 */ |
| 61 | #define ICR_BUSMODE_HS (1 << 17) /* shifted high speed mode for armada-3700 */ |
| 62 | |
| 63 | /* |
| 64 | * I2C registers definitions |
| 65 | */ |
| 66 | static struct pxa_reg_layout pxa_reg_layout[] = { |
| 67 | [REGS_PXA2XX] = { |
| 68 | .ibmr = 0x00, |
| 69 | .idbr = 0x08, |
| 70 | .icr = 0x10, |
| 71 | .isr = 0x18, |
| 72 | .isar = 0x20, |
| 73 | }, |
| 74 | [REGS_PXA3XX] = { |
| 75 | .ibmr = 0x00, |
| 76 | .idbr = 0x04, |
| 77 | .icr = 0x08, |
| 78 | .isr = 0x0c, |
| 79 | .isar = 0x10, |
| 80 | }, |
| 81 | [REGS_CE4100] = { |
| 82 | .ibmr = 0x14, |
| 83 | .idbr = 0x0c, |
| 84 | .icr = 0x00, |
| 85 | .isr = 0x04, |
| 86 | /* no isar register */ |
| 87 | }, |
| 88 | [REGS_PXA910] = { |
| 89 | .ibmr = 0x00, |
| 90 | .idbr = 0x08, |
| 91 | .icr = 0x10, |
| 92 | .isr = 0x18, |
| 93 | .isar = 0x20, |
| 94 | .ilcr = 0x28, |
| 95 | .iwcr = 0x30, |
| 96 | }, |
| 97 | [REGS_A3700] = { |
| 98 | .ibmr = 0x00, |
| 99 | .idbr = 0x04, |
| 100 | .icr = 0x08, |
| 101 | .isr = 0x0c, |
| 102 | .isar = 0x10, |
| 103 | .fm = ICR_BUSMODE_FM, |
| 104 | .hs = ICR_BUSMODE_HS, |
| 105 | }, |
| 106 | }; |
| 107 | |
| 108 | static const struct platform_device_id i2c_pxa_id_table[] = { |
| 109 | { "pxa2xx-i2c", REGS_PXA2XX }, |
| 110 | { "pxa3xx-pwri2c", REGS_PXA3XX }, |
| 111 | { "ce4100-i2c", REGS_CE4100 }, |
| 112 | { "pxa910-i2c", REGS_PXA910 }, |
| 113 | { "armada-3700-i2c", REGS_A3700 }, |
| 114 | { }, |
| 115 | }; |
| 116 | MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); |
| 117 | |
| 118 | /* |
| 119 | * I2C bit definitions |
| 120 | */ |
| 121 | |
| 122 | #define ICR_START (1 << 0) /* start bit */ |
| 123 | #define ICR_STOP (1 << 1) /* stop bit */ |
| 124 | #define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ |
| 125 | #define ICR_TB (1 << 3) /* transfer byte bit */ |
| 126 | #define ICR_MA (1 << 4) /* master abort */ |
| 127 | #define ICR_SCLE (1 << 5) /* master clock enable */ |
| 128 | #define ICR_IUE (1 << 6) /* unit enable */ |
| 129 | #define ICR_GCD (1 << 7) /* general call disable */ |
| 130 | #define ICR_ITEIE (1 << 8) /* enable tx interrupts */ |
| 131 | #define ICR_IRFIE (1 << 9) /* enable rx interrupts */ |
| 132 | #define ICR_BEIE (1 << 10) /* enable bus error ints */ |
| 133 | #define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ |
| 134 | #define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ |
| 135 | #define ICR_SADIE (1 << 13) /* slave address detected int enable */ |
| 136 | #define ICR_UR (1 << 14) /* unit reset */ |
| 137 | #define ICR_FM (1 << 15) /* fast mode */ |
| 138 | #define ICR_HS (1 << 16) /* High Speed mode */ |
| 139 | #define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */ |
| 140 | |
| 141 | #define ISR_RWM (1 << 0) /* read/write mode */ |
| 142 | #define ISR_ACKNAK (1 << 1) /* ack/nak status */ |
| 143 | #define ISR_UB (1 << 2) /* unit busy */ |
| 144 | #define ISR_IBB (1 << 3) /* bus busy */ |
| 145 | #define ISR_SSD (1 << 4) /* slave stop detected */ |
| 146 | #define ISR_ALD (1 << 5) /* arbitration loss detected */ |
| 147 | #define ISR_ITE (1 << 6) /* tx buffer empty */ |
| 148 | #define ISR_IRF (1 << 7) /* rx buffer full */ |
| 149 | #define ISR_GCAD (1 << 8) /* general call address detected */ |
| 150 | #define ISR_SAD (1 << 9) /* slave address detected */ |
| 151 | #define ISR_BED (1 << 10) /* bus error no ACK/NAK */ |
| 152 | |
| 153 | /* bit field shift & mask */ |
| 154 | #define ILCR_SLV_SHIFT 0 |
| 155 | #define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT) |
| 156 | #define ILCR_FLV_SHIFT 9 |
| 157 | #define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT) |
| 158 | #define ILCR_HLVL_SHIFT 18 |
| 159 | #define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT) |
| 160 | #define ILCR_HLVH_SHIFT 27 |
| 161 | #define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT) |
| 162 | |
| 163 | #define IWCR_CNT_SHIFT 0 |
| 164 | #define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT) |
| 165 | #define IWCR_HS_CNT1_SHIFT 5 |
| 166 | #define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT) |
| 167 | #define IWCR_HS_CNT2_SHIFT 10 |
| 168 | #define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) |
| 169 | |
| 170 | struct pxa_i2c { |
| 171 | spinlock_t lock; |
| 172 | wait_queue_head_t wait; |
| 173 | struct i2c_msg *msg; |
| 174 | unsigned int msg_num; |
| 175 | unsigned int msg_idx; |
| 176 | unsigned int msg_ptr; |
| 177 | unsigned int slave_addr; |
| 178 | unsigned int req_slave_addr; |
| 179 | |
| 180 | struct i2c_adapter adap; |
| 181 | struct clk *clk; |
| 182 | #ifdef CONFIG_I2C_PXA_SLAVE |
| 183 | struct i2c_slave_client *slave; |
| 184 | #endif |
| 185 | |
| 186 | unsigned int irqlogidx; |
| 187 | u32 isrlog[32]; |
| 188 | u32 icrlog[32]; |
| 189 | |
| 190 | void __iomem *reg_base; |
| 191 | void __iomem *reg_ibmr; |
| 192 | void __iomem *reg_idbr; |
| 193 | void __iomem *reg_icr; |
| 194 | void __iomem *reg_isr; |
| 195 | void __iomem *reg_isar; |
| 196 | void __iomem *reg_ilcr; |
| 197 | void __iomem *reg_iwcr; |
| 198 | |
| 199 | unsigned long iobase; |
| 200 | unsigned long iosize; |
| 201 | |
| 202 | int irq; |
| 203 | unsigned int use_pio :1; |
| 204 | unsigned int fast_mode :1; |
| 205 | unsigned int high_mode:1; |
| 206 | unsigned char master_code; |
| 207 | unsigned long rate; |
| 208 | bool highmode_enter; |
| 209 | u32 fm_mask; |
| 210 | u32 hs_mask; |
| 211 | }; |
| 212 | |
| 213 | #define _IBMR(i2c) ((i2c)->reg_ibmr) |
| 214 | #define _IDBR(i2c) ((i2c)->reg_idbr) |
| 215 | #define _ICR(i2c) ((i2c)->reg_icr) |
| 216 | #define _ISR(i2c) ((i2c)->reg_isr) |
| 217 | #define _ISAR(i2c) ((i2c)->reg_isar) |
| 218 | #define _ILCR(i2c) ((i2c)->reg_ilcr) |
| 219 | #define _IWCR(i2c) ((i2c)->reg_iwcr) |
| 220 | |
| 221 | /* |
| 222 | * I2C Slave mode address |
| 223 | */ |
| 224 | #define I2C_PXA_SLAVE_ADDR 0x1 |
| 225 | |
| 226 | #ifdef DEBUG |
| 227 | |
| 228 | struct bits { |
| 229 | u32 mask; |
| 230 | const char *set; |
| 231 | const char *unset; |
| 232 | }; |
| 233 | #define PXA_BIT(m, s, u) { .mask = m, .set = s, .unset = u } |
| 234 | |
| 235 | static inline void |
| 236 | decode_bits(const char *prefix, const struct bits *bits, int num, u32 val) |
| 237 | { |
| 238 | printk("%s %08x: ", prefix, val); |
| 239 | while (num--) { |
| 240 | const char *str = val & bits->mask ? bits->set : bits->unset; |
| 241 | if (str) |
| 242 | printk("%s ", str); |
| 243 | bits++; |
| 244 | } |
| 245 | } |
| 246 | |
| 247 | static const struct bits isr_bits[] = { |
| 248 | PXA_BIT(ISR_RWM, "RX", "TX"), |
| 249 | PXA_BIT(ISR_ACKNAK, "NAK", "ACK"), |
| 250 | PXA_BIT(ISR_UB, "Bsy", "Rdy"), |
| 251 | PXA_BIT(ISR_IBB, "BusBsy", "BusRdy"), |
| 252 | PXA_BIT(ISR_SSD, "SlaveStop", NULL), |
| 253 | PXA_BIT(ISR_ALD, "ALD", NULL), |
| 254 | PXA_BIT(ISR_ITE, "TxEmpty", NULL), |
| 255 | PXA_BIT(ISR_IRF, "RxFull", NULL), |
| 256 | PXA_BIT(ISR_GCAD, "GenCall", NULL), |
| 257 | PXA_BIT(ISR_SAD, "SlaveAddr", NULL), |
| 258 | PXA_BIT(ISR_BED, "BusErr", NULL), |
| 259 | }; |
| 260 | |
| 261 | static void decode_ISR(unsigned int val) |
| 262 | { |
| 263 | decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val); |
| 264 | printk("\n"); |
| 265 | } |
| 266 | |
| 267 | static const struct bits icr_bits[] = { |
| 268 | PXA_BIT(ICR_START, "START", NULL), |
| 269 | PXA_BIT(ICR_STOP, "STOP", NULL), |
| 270 | PXA_BIT(ICR_ACKNAK, "ACKNAK", NULL), |
| 271 | PXA_BIT(ICR_TB, "TB", NULL), |
| 272 | PXA_BIT(ICR_MA, "MA", NULL), |
| 273 | PXA_BIT(ICR_SCLE, "SCLE", "scle"), |
| 274 | PXA_BIT(ICR_IUE, "IUE", "iue"), |
| 275 | PXA_BIT(ICR_GCD, "GCD", NULL), |
| 276 | PXA_BIT(ICR_ITEIE, "ITEIE", NULL), |
| 277 | PXA_BIT(ICR_IRFIE, "IRFIE", NULL), |
| 278 | PXA_BIT(ICR_BEIE, "BEIE", NULL), |
| 279 | PXA_BIT(ICR_SSDIE, "SSDIE", NULL), |
| 280 | PXA_BIT(ICR_ALDIE, "ALDIE", NULL), |
| 281 | PXA_BIT(ICR_SADIE, "SADIE", NULL), |
| 282 | PXA_BIT(ICR_UR, "UR", "ur"), |
| 283 | }; |
| 284 | |
| 285 | #ifdef CONFIG_I2C_PXA_SLAVE |
| 286 | static void decode_ICR(unsigned int val) |
| 287 | { |
| 288 | decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val); |
| 289 | printk("\n"); |
| 290 | } |
| 291 | #endif |
| 292 | |
| 293 | static unsigned int i2c_debug = DEBUG; |
| 294 | |
| 295 | static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) |
| 296 | { |
| 297 | dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, |
| 298 | readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| 299 | } |
| 300 | |
| 301 | #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__) |
| 302 | |
| 303 | static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) |
| 304 | { |
| 305 | unsigned int i; |
| 306 | struct device *dev = &i2c->adap.dev; |
| 307 | |
| 308 | dev_err(dev, "slave_0x%x error: %s\n", |
| 309 | i2c->req_slave_addr >> 1, why); |
| 310 | dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n", |
| 311 | i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); |
| 312 | dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", |
| 313 | readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), |
| 314 | readl(_ISR(i2c))); |
| 315 | dev_dbg(dev, "log: "); |
| 316 | for (i = 0; i < i2c->irqlogidx; i++) |
| 317 | pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); |
| 318 | |
| 319 | pr_debug("\n"); |
| 320 | } |
| 321 | |
| 322 | #else /* ifdef DEBUG */ |
| 323 | |
| 324 | #define i2c_debug 0 |
| 325 | |
| 326 | #define show_state(i2c) do { } while (0) |
| 327 | #define decode_ISR(val) do { } while (0) |
| 328 | #define decode_ICR(val) do { } while (0) |
| 329 | #define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0) |
| 330 | |
| 331 | #endif /* ifdef DEBUG / else */ |
| 332 | |
| 333 | static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); |
| 334 | static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); |
| 335 | |
| 336 | static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) |
| 337 | { |
| 338 | return !(readl(_ICR(i2c)) & ICR_SCLE); |
| 339 | } |
| 340 | |
| 341 | static void i2c_pxa_abort(struct pxa_i2c *i2c) |
| 342 | { |
| 343 | int i = 250; |
| 344 | |
| 345 | if (i2c_pxa_is_slavemode(i2c)) { |
| 346 | dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__); |
| 347 | return; |
| 348 | } |
| 349 | |
| 350 | while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) { |
| 351 | unsigned long icr = readl(_ICR(i2c)); |
| 352 | |
| 353 | icr &= ~ICR_START; |
| 354 | icr |= ICR_ACKNAK | ICR_STOP | ICR_TB; |
| 355 | |
| 356 | writel(icr, _ICR(i2c)); |
| 357 | |
| 358 | show_state(i2c); |
| 359 | |
| 360 | mdelay(1); |
| 361 | i --; |
| 362 | } |
| 363 | |
| 364 | writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), |
| 365 | _ICR(i2c)); |
| 366 | } |
| 367 | |
| 368 | static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) |
| 369 | { |
| 370 | int timeout = DEF_TIMEOUT; |
| 371 | |
| 372 | while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { |
| 373 | if ((readl(_ISR(i2c)) & ISR_SAD) != 0) |
| 374 | timeout += 4; |
| 375 | |
| 376 | msleep(2); |
| 377 | show_state(i2c); |
| 378 | } |
| 379 | |
| 380 | if (timeout < 0) |
| 381 | show_state(i2c); |
| 382 | |
| 383 | return timeout < 0 ? I2C_RETRY : 0; |
| 384 | } |
| 385 | |
| 386 | static int i2c_pxa_wait_master(struct pxa_i2c *i2c) |
| 387 | { |
| 388 | unsigned long timeout = jiffies + HZ*4; |
| 389 | |
| 390 | while (time_before(jiffies, timeout)) { |
| 391 | if (i2c_debug > 1) |
| 392 | dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
| 393 | __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| 394 | |
| 395 | if (readl(_ISR(i2c)) & ISR_SAD) { |
| 396 | if (i2c_debug > 0) |
| 397 | dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__); |
| 398 | goto out; |
| 399 | } |
| 400 | |
| 401 | /* wait for unit and bus being not busy, and we also do a |
| 402 | * quick check of the i2c lines themselves to ensure they've |
| 403 | * gone high... |
| 404 | */ |
| 405 | if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) { |
| 406 | if (i2c_debug > 0) |
| 407 | dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); |
| 408 | return 1; |
| 409 | } |
| 410 | |
| 411 | msleep(1); |
| 412 | } |
| 413 | |
| 414 | if (i2c_debug > 0) |
| 415 | dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); |
| 416 | out: |
| 417 | return 0; |
| 418 | } |
| 419 | |
| 420 | static int i2c_pxa_set_master(struct pxa_i2c *i2c) |
| 421 | { |
| 422 | if (i2c_debug) |
| 423 | dev_dbg(&i2c->adap.dev, "setting to bus master\n"); |
| 424 | |
| 425 | if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) { |
| 426 | dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__); |
| 427 | if (!i2c_pxa_wait_master(i2c)) { |
| 428 | dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__); |
| 429 | return I2C_RETRY; |
| 430 | } |
| 431 | } |
| 432 | |
| 433 | writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); |
| 434 | return 0; |
| 435 | } |
| 436 | |
| 437 | #ifdef CONFIG_I2C_PXA_SLAVE |
| 438 | static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) |
| 439 | { |
| 440 | unsigned long timeout = jiffies + HZ*1; |
| 441 | |
| 442 | /* wait for stop */ |
| 443 | |
| 444 | show_state(i2c); |
| 445 | |
| 446 | while (time_before(jiffies, timeout)) { |
| 447 | if (i2c_debug > 1) |
| 448 | dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
| 449 | __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| 450 | |
| 451 | if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 || |
| 452 | (readl(_ISR(i2c)) & ISR_SAD) != 0 || |
| 453 | (readl(_ICR(i2c)) & ICR_SCLE) == 0) { |
| 454 | if (i2c_debug > 1) |
| 455 | dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); |
| 456 | return 1; |
| 457 | } |
| 458 | |
| 459 | msleep(1); |
| 460 | } |
| 461 | |
| 462 | if (i2c_debug > 0) |
| 463 | dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); |
| 464 | return 0; |
| 465 | } |
| 466 | |
| 467 | /* |
| 468 | * clear the hold on the bus, and take of anything else |
| 469 | * that has been configured |
| 470 | */ |
| 471 | static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) |
| 472 | { |
| 473 | show_state(i2c); |
| 474 | |
| 475 | if (errcode < 0) { |
| 476 | udelay(100); /* simple delay */ |
| 477 | } else { |
| 478 | /* we need to wait for the stop condition to end */ |
| 479 | |
| 480 | /* if we where in stop, then clear... */ |
| 481 | if (readl(_ICR(i2c)) & ICR_STOP) { |
| 482 | udelay(100); |
| 483 | writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c)); |
| 484 | } |
| 485 | |
| 486 | if (!i2c_pxa_wait_slave(i2c)) { |
| 487 | dev_err(&i2c->adap.dev, "%s: wait timedout\n", |
| 488 | __func__); |
| 489 | return; |
| 490 | } |
| 491 | } |
| 492 | |
| 493 | writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c)); |
| 494 | writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
| 495 | |
| 496 | if (i2c_debug) { |
| 497 | dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c))); |
| 498 | decode_ICR(readl(_ICR(i2c))); |
| 499 | } |
| 500 | } |
| 501 | #else |
| 502 | #define i2c_pxa_set_slave(i2c, err) do { } while (0) |
| 503 | #endif |
| 504 | |
| 505 | static void i2c_pxa_reset(struct pxa_i2c *i2c) |
| 506 | { |
| 507 | pr_debug("Resetting I2C Controller Unit\n"); |
| 508 | |
| 509 | /* abort any transfer currently under way */ |
| 510 | i2c_pxa_abort(i2c); |
| 511 | |
| 512 | /* reset according to 9.8 */ |
| 513 | writel(ICR_UR, _ICR(i2c)); |
| 514 | writel(I2C_ISR_INIT, _ISR(i2c)); |
| 515 | writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); |
| 516 | |
| 517 | if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) |
| 518 | writel(i2c->slave_addr, _ISAR(i2c)); |
| 519 | |
| 520 | /* set control register values */ |
| 521 | writel(I2C_ICR_INIT | (i2c->fast_mode ? i2c->fm_mask : 0), _ICR(i2c)); |
| 522 | writel(readl(_ICR(i2c)) | (i2c->high_mode ? i2c->hs_mask : 0), _ICR(i2c)); |
| 523 | |
| 524 | #ifdef CONFIG_I2C_PXA_SLAVE |
| 525 | dev_info(&i2c->adap.dev, "Enabling slave mode\n"); |
| 526 | writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c)); |
| 527 | #endif |
| 528 | |
| 529 | i2c_pxa_set_slave(i2c, 0); |
| 530 | |
| 531 | /* enable unit */ |
| 532 | writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); |
| 533 | udelay(100); |
| 534 | } |
| 535 | |
| 536 | |
| 537 | #ifdef CONFIG_I2C_PXA_SLAVE |
| 538 | /* |
| 539 | * PXA I2C Slave mode |
| 540 | */ |
| 541 | |
| 542 | static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) |
| 543 | { |
| 544 | if (isr & ISR_BED) { |
| 545 | /* what should we do here? */ |
| 546 | } else { |
| 547 | int ret = 0; |
| 548 | |
| 549 | if (i2c->slave != NULL) |
| 550 | ret = i2c->slave->read(i2c->slave->data); |
| 551 | |
| 552 | writel(ret, _IDBR(i2c)); |
| 553 | writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */ |
| 554 | } |
| 555 | } |
| 556 | |
| 557 | static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) |
| 558 | { |
| 559 | unsigned int byte = readl(_IDBR(i2c)); |
| 560 | |
| 561 | if (i2c->slave != NULL) |
| 562 | i2c->slave->write(i2c->slave->data, byte); |
| 563 | |
| 564 | writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
| 565 | } |
| 566 | |
| 567 | static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) |
| 568 | { |
| 569 | int timeout; |
| 570 | |
| 571 | if (i2c_debug > 0) |
| 572 | dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n", |
| 573 | (isr & ISR_RWM) ? 'r' : 't'); |
| 574 | |
| 575 | if (i2c->slave != NULL) |
| 576 | i2c->slave->event(i2c->slave->data, |
| 577 | (isr & ISR_RWM) ? I2C_SLAVE_EVENT_START_READ : I2C_SLAVE_EVENT_START_WRITE); |
| 578 | |
| 579 | /* |
| 580 | * slave could interrupt in the middle of us generating a |
| 581 | * start condition... if this happens, we'd better back off |
| 582 | * and stop holding the poor thing up |
| 583 | */ |
| 584 | writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); |
| 585 | writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
| 586 | |
| 587 | timeout = 0x10000; |
| 588 | |
| 589 | while (1) { |
| 590 | if ((readl(_IBMR(i2c)) & 2) == 2) |
| 591 | break; |
| 592 | |
| 593 | timeout--; |
| 594 | |
| 595 | if (timeout <= 0) { |
| 596 | dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); |
| 597 | break; |
| 598 | } |
| 599 | } |
| 600 | |
| 601 | writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
| 602 | } |
| 603 | |
| 604 | static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) |
| 605 | { |
| 606 | if (i2c_debug > 2) |
| 607 | dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n"); |
| 608 | |
| 609 | if (i2c->slave != NULL) |
| 610 | i2c->slave->event(i2c->slave->data, I2C_SLAVE_EVENT_STOP); |
| 611 | |
| 612 | if (i2c_debug > 2) |
| 613 | dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n"); |
| 614 | |
| 615 | /* |
| 616 | * If we have a master-mode message waiting, |
| 617 | * kick it off now that the slave has completed. |
| 618 | */ |
| 619 | if (i2c->msg) |
| 620 | i2c_pxa_master_complete(i2c, I2C_RETRY); |
| 621 | } |
| 622 | #else |
| 623 | static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) |
| 624 | { |
| 625 | if (isr & ISR_BED) { |
| 626 | /* what should we do here? */ |
| 627 | } else { |
| 628 | writel(0, _IDBR(i2c)); |
| 629 | writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
| 630 | } |
| 631 | } |
| 632 | |
| 633 | static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) |
| 634 | { |
| 635 | writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); |
| 636 | } |
| 637 | |
| 638 | static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) |
| 639 | { |
| 640 | int timeout; |
| 641 | |
| 642 | /* |
| 643 | * slave could interrupt in the middle of us generating a |
| 644 | * start condition... if this happens, we'd better back off |
| 645 | * and stop holding the poor thing up |
| 646 | */ |
| 647 | writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); |
| 648 | writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); |
| 649 | |
| 650 | timeout = 0x10000; |
| 651 | |
| 652 | while (1) { |
| 653 | if ((readl(_IBMR(i2c)) & 2) == 2) |
| 654 | break; |
| 655 | |
| 656 | timeout--; |
| 657 | |
| 658 | if (timeout <= 0) { |
| 659 | dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); |
| 660 | break; |
| 661 | } |
| 662 | } |
| 663 | |
| 664 | writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
| 665 | } |
| 666 | |
| 667 | static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) |
| 668 | { |
| 669 | if (i2c->msg) |
| 670 | i2c_pxa_master_complete(i2c, I2C_RETRY); |
| 671 | } |
| 672 | #endif |
| 673 | |
| 674 | /* |
| 675 | * PXA I2C Master mode |
| 676 | */ |
| 677 | |
| 678 | static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg) |
| 679 | { |
| 680 | unsigned int addr = (msg->addr & 0x7f) << 1; |
| 681 | |
| 682 | if (msg->flags & I2C_M_RD) |
| 683 | addr |= 1; |
| 684 | |
| 685 | return addr; |
| 686 | } |
| 687 | |
| 688 | static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) |
| 689 | { |
| 690 | u32 icr; |
| 691 | |
| 692 | /* |
| 693 | * Step 1: target slave address into IDBR |
| 694 | */ |
| 695 | writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); |
| 696 | i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); |
| 697 | |
| 698 | /* |
| 699 | * Step 2: initiate the write. |
| 700 | */ |
| 701 | icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); |
| 702 | writel(icr | ICR_START | ICR_TB, _ICR(i2c)); |
| 703 | } |
| 704 | |
| 705 | static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) |
| 706 | { |
| 707 | u32 icr; |
| 708 | |
| 709 | /* |
| 710 | * Clear the STOP and ACK flags |
| 711 | */ |
| 712 | icr = readl(_ICR(i2c)); |
| 713 | icr &= ~(ICR_STOP | ICR_ACKNAK); |
| 714 | writel(icr, _ICR(i2c)); |
| 715 | } |
| 716 | |
| 717 | static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) |
| 718 | { |
| 719 | /* make timeout the same as for interrupt based functions */ |
| 720 | long timeout = 2 * DEF_TIMEOUT; |
| 721 | |
| 722 | /* |
| 723 | * Wait for the bus to become free. |
| 724 | */ |
| 725 | while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { |
| 726 | udelay(1000); |
| 727 | show_state(i2c); |
| 728 | } |
| 729 | |
| 730 | if (timeout < 0) { |
| 731 | show_state(i2c); |
| 732 | dev_err(&i2c->adap.dev, |
| 733 | "i2c_pxa: timeout waiting for bus free\n"); |
| 734 | return I2C_RETRY; |
| 735 | } |
| 736 | |
| 737 | /* |
| 738 | * Set master mode. |
| 739 | */ |
| 740 | writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); |
| 741 | |
| 742 | return 0; |
| 743 | } |
| 744 | |
| 745 | /* |
| 746 | * PXA I2C send master code |
| 747 | * 1. Load master code to IDBR and send it. |
| 748 | * Note for HS mode, set ICR [GPIOEN]. |
| 749 | * 2. Wait until win arbitration. |
| 750 | */ |
| 751 | static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c) |
| 752 | { |
| 753 | u32 icr; |
| 754 | long timeout; |
| 755 | |
| 756 | spin_lock_irq(&i2c->lock); |
| 757 | i2c->highmode_enter = true; |
| 758 | writel(i2c->master_code, _IDBR(i2c)); |
| 759 | |
| 760 | icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); |
| 761 | icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE; |
| 762 | writel(icr, _ICR(i2c)); |
| 763 | |
| 764 | spin_unlock_irq(&i2c->lock); |
| 765 | timeout = wait_event_timeout(i2c->wait, |
| 766 | i2c->highmode_enter == false, HZ * 1); |
| 767 | |
| 768 | i2c->highmode_enter = false; |
| 769 | |
| 770 | return (timeout == 0) ? I2C_RETRY : 0; |
| 771 | } |
| 772 | |
| 773 | static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, |
| 774 | struct i2c_msg *msg, int num) |
| 775 | { |
| 776 | unsigned long timeout = 500000; /* 5 seconds */ |
| 777 | int ret = 0; |
| 778 | |
| 779 | ret = i2c_pxa_pio_set_master(i2c); |
| 780 | if (ret) |
| 781 | goto out; |
| 782 | |
| 783 | i2c->msg = msg; |
| 784 | i2c->msg_num = num; |
| 785 | i2c->msg_idx = 0; |
| 786 | i2c->msg_ptr = 0; |
| 787 | i2c->irqlogidx = 0; |
| 788 | |
| 789 | i2c_pxa_start_message(i2c); |
| 790 | |
| 791 | while (i2c->msg_num > 0 && --timeout) { |
| 792 | i2c_pxa_handler(0, i2c); |
| 793 | udelay(10); |
| 794 | } |
| 795 | |
| 796 | i2c_pxa_stop_message(i2c); |
| 797 | |
| 798 | /* |
| 799 | * We place the return code in i2c->msg_idx. |
| 800 | */ |
| 801 | ret = i2c->msg_idx; |
| 802 | |
| 803 | out: |
| 804 | if (timeout == 0) { |
| 805 | i2c_pxa_scream_blue_murder(i2c, "timeout"); |
| 806 | ret = I2C_RETRY; |
| 807 | } |
| 808 | |
| 809 | return ret; |
| 810 | } |
| 811 | |
| 812 | /* |
| 813 | * We are protected by the adapter bus mutex. |
| 814 | */ |
| 815 | static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) |
| 816 | { |
| 817 | long timeout; |
| 818 | int ret; |
| 819 | |
| 820 | /* |
| 821 | * Wait for the bus to become free. |
| 822 | */ |
| 823 | ret = i2c_pxa_wait_bus_not_busy(i2c); |
| 824 | if (ret) { |
| 825 | dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); |
| 826 | goto out; |
| 827 | } |
| 828 | |
| 829 | /* |
| 830 | * Set master mode. |
| 831 | */ |
| 832 | ret = i2c_pxa_set_master(i2c); |
| 833 | if (ret) { |
| 834 | dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); |
| 835 | goto out; |
| 836 | } |
| 837 | |
| 838 | if (i2c->high_mode) { |
| 839 | ret = i2c_pxa_send_mastercode(i2c); |
| 840 | if (ret) { |
| 841 | dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); |
| 842 | goto out; |
| 843 | } |
| 844 | } |
| 845 | |
| 846 | spin_lock_irq(&i2c->lock); |
| 847 | |
| 848 | i2c->msg = msg; |
| 849 | i2c->msg_num = num; |
| 850 | i2c->msg_idx = 0; |
| 851 | i2c->msg_ptr = 0; |
| 852 | i2c->irqlogidx = 0; |
| 853 | |
| 854 | i2c_pxa_start_message(i2c); |
| 855 | |
| 856 | spin_unlock_irq(&i2c->lock); |
| 857 | |
| 858 | /* |
| 859 | * The rest of the processing occurs in the interrupt handler. |
| 860 | */ |
| 861 | timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); |
| 862 | i2c_pxa_stop_message(i2c); |
| 863 | |
| 864 | /* |
| 865 | * We place the return code in i2c->msg_idx. |
| 866 | */ |
| 867 | ret = i2c->msg_idx; |
| 868 | |
| 869 | if (!timeout && i2c->msg_num) { |
| 870 | i2c_pxa_scream_blue_murder(i2c, "timeout"); |
| 871 | ret = I2C_RETRY; |
| 872 | } |
| 873 | |
| 874 | out: |
| 875 | return ret; |
| 876 | } |
| 877 | |
| 878 | static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, |
| 879 | struct i2c_msg msgs[], int num) |
| 880 | { |
| 881 | struct pxa_i2c *i2c = adap->algo_data; |
| 882 | int ret, i; |
| 883 | |
| 884 | /* If the I2C controller is disabled we need to reset it |
| 885 | (probably due to a suspend/resume destroying state). We do |
| 886 | this here as we can then avoid worrying about resuming the |
| 887 | controller before its users. */ |
| 888 | if (!(readl(_ICR(i2c)) & ICR_IUE)) |
| 889 | i2c_pxa_reset(i2c); |
| 890 | |
| 891 | for (i = adap->retries; i >= 0; i--) { |
| 892 | ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); |
| 893 | if (ret != I2C_RETRY) |
| 894 | goto out; |
| 895 | |
| 896 | if (i2c_debug) |
| 897 | dev_dbg(&adap->dev, "Retrying transmission\n"); |
| 898 | udelay(100); |
| 899 | } |
| 900 | i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); |
| 901 | ret = -EREMOTEIO; |
| 902 | out: |
| 903 | i2c_pxa_set_slave(i2c, ret); |
| 904 | return ret; |
| 905 | } |
| 906 | |
| 907 | /* |
| 908 | * i2c_pxa_master_complete - complete the message and wake up. |
| 909 | */ |
| 910 | static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) |
| 911 | { |
| 912 | i2c->msg_ptr = 0; |
| 913 | i2c->msg = NULL; |
| 914 | i2c->msg_idx ++; |
| 915 | i2c->msg_num = 0; |
| 916 | if (ret) |
| 917 | i2c->msg_idx = ret; |
| 918 | if (!i2c->use_pio) |
| 919 | wake_up(&i2c->wait); |
| 920 | } |
| 921 | |
| 922 | static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) |
| 923 | { |
| 924 | u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); |
| 925 | |
| 926 | again: |
| 927 | /* |
| 928 | * If ISR_ALD is set, we lost arbitration. |
| 929 | */ |
| 930 | if (isr & ISR_ALD) { |
| 931 | /* |
| 932 | * Do we need to do anything here? The PXA docs |
| 933 | * are vague about what happens. |
| 934 | */ |
| 935 | i2c_pxa_scream_blue_murder(i2c, "ALD set"); |
| 936 | |
| 937 | /* |
| 938 | * We ignore this error. We seem to see spurious ALDs |
| 939 | * for seemingly no reason. If we handle them as I think |
| 940 | * they should, we end up causing an I2C error, which |
| 941 | * is painful for some systems. |
| 942 | */ |
| 943 | return; /* ignore */ |
| 944 | } |
| 945 | |
| 946 | if ((isr & ISR_BED) && |
| 947 | (!((i2c->msg->flags & I2C_M_IGNORE_NAK) && |
| 948 | (isr & ISR_ACKNAK)))) { |
| 949 | int ret = BUS_ERROR; |
| 950 | |
| 951 | /* |
| 952 | * I2C bus error - either the device NAK'd us, or |
| 953 | * something more serious happened. If we were NAK'd |
| 954 | * on the initial address phase, we can retry. |
| 955 | */ |
| 956 | if (isr & ISR_ACKNAK) { |
| 957 | if (i2c->msg_ptr == 0 && i2c->msg_idx == 0) |
| 958 | ret = I2C_RETRY; |
| 959 | else |
| 960 | ret = XFER_NAKED; |
| 961 | } |
| 962 | i2c_pxa_master_complete(i2c, ret); |
| 963 | } else if (isr & ISR_RWM) { |
| 964 | /* |
| 965 | * Read mode. We have just sent the address byte, and |
| 966 | * now we must initiate the transfer. |
| 967 | */ |
| 968 | if (i2c->msg_ptr == i2c->msg->len - 1 && |
| 969 | i2c->msg_idx == i2c->msg_num - 1) |
| 970 | icr |= ICR_STOP | ICR_ACKNAK; |
| 971 | |
| 972 | icr |= ICR_ALDIE | ICR_TB; |
| 973 | } else if (i2c->msg_ptr < i2c->msg->len) { |
| 974 | /* |
| 975 | * Write mode. Write the next data byte. |
| 976 | */ |
| 977 | writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c)); |
| 978 | |
| 979 | icr |= ICR_ALDIE | ICR_TB; |
| 980 | |
| 981 | /* |
| 982 | * If this is the last byte of the last message or last byte |
| 983 | * of any message with I2C_M_STOP (e.g. SCCB), send a STOP. |
| 984 | */ |
| 985 | if ((i2c->msg_ptr == i2c->msg->len) && |
| 986 | ((i2c->msg->flags & I2C_M_STOP) || |
| 987 | (i2c->msg_idx == i2c->msg_num - 1))) |
| 988 | icr |= ICR_STOP; |
| 989 | |
| 990 | } else if (i2c->msg_idx < i2c->msg_num - 1) { |
| 991 | /* |
| 992 | * Next segment of the message. |
| 993 | */ |
| 994 | i2c->msg_ptr = 0; |
| 995 | i2c->msg_idx ++; |
| 996 | i2c->msg++; |
| 997 | |
| 998 | /* |
| 999 | * If we aren't doing a repeated start and address, |
| 1000 | * go back and try to send the next byte. Note that |
| 1001 | * we do not support switching the R/W direction here. |
| 1002 | */ |
| 1003 | if (i2c->msg->flags & I2C_M_NOSTART) |
| 1004 | goto again; |
| 1005 | |
| 1006 | /* |
| 1007 | * Write the next address. |
| 1008 | */ |
| 1009 | writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); |
| 1010 | i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); |
| 1011 | |
| 1012 | /* |
| 1013 | * And trigger a repeated start, and send the byte. |
| 1014 | */ |
| 1015 | icr &= ~ICR_ALDIE; |
| 1016 | icr |= ICR_START | ICR_TB; |
| 1017 | } else { |
| 1018 | if (i2c->msg->len == 0) { |
| 1019 | /* |
| 1020 | * Device probes have a message length of zero |
| 1021 | * and need the bus to be reset before it can |
| 1022 | * be used again. |
| 1023 | */ |
| 1024 | i2c_pxa_reset(i2c); |
| 1025 | } |
| 1026 | i2c_pxa_master_complete(i2c, 0); |
| 1027 | } |
| 1028 | |
| 1029 | i2c->icrlog[i2c->irqlogidx-1] = icr; |
| 1030 | |
| 1031 | writel(icr, _ICR(i2c)); |
| 1032 | show_state(i2c); |
| 1033 | } |
| 1034 | |
| 1035 | static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) |
| 1036 | { |
| 1037 | u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); |
| 1038 | |
| 1039 | /* |
| 1040 | * Read the byte. |
| 1041 | */ |
| 1042 | i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c)); |
| 1043 | |
| 1044 | if (i2c->msg_ptr < i2c->msg->len) { |
| 1045 | /* |
| 1046 | * If this is the last byte of the last |
| 1047 | * message, send a STOP. |
| 1048 | */ |
| 1049 | if (i2c->msg_ptr == i2c->msg->len - 1) |
| 1050 | icr |= ICR_STOP | ICR_ACKNAK; |
| 1051 | |
| 1052 | icr |= ICR_ALDIE | ICR_TB; |
| 1053 | } else { |
| 1054 | i2c_pxa_master_complete(i2c, 0); |
| 1055 | } |
| 1056 | |
| 1057 | i2c->icrlog[i2c->irqlogidx-1] = icr; |
| 1058 | |
| 1059 | writel(icr, _ICR(i2c)); |
| 1060 | } |
| 1061 | |
| 1062 | #define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \ |
| 1063 | ISR_SAD | ISR_BED) |
| 1064 | static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) |
| 1065 | { |
| 1066 | struct pxa_i2c *i2c = dev_id; |
| 1067 | u32 isr = readl(_ISR(i2c)); |
| 1068 | |
| 1069 | if (!(isr & VALID_INT_SOURCE)) |
| 1070 | return IRQ_NONE; |
| 1071 | |
| 1072 | if (i2c_debug > 2 && 0) { |
| 1073 | dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
| 1074 | __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| 1075 | decode_ISR(isr); |
| 1076 | } |
| 1077 | |
| 1078 | if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog)) |
| 1079 | i2c->isrlog[i2c->irqlogidx++] = isr; |
| 1080 | |
| 1081 | show_state(i2c); |
| 1082 | |
| 1083 | /* |
| 1084 | * Always clear all pending IRQs. |
| 1085 | */ |
| 1086 | writel(isr & VALID_INT_SOURCE, _ISR(i2c)); |
| 1087 | |
| 1088 | if (isr & ISR_SAD) |
| 1089 | i2c_pxa_slave_start(i2c, isr); |
| 1090 | if (isr & ISR_SSD) |
| 1091 | i2c_pxa_slave_stop(i2c); |
| 1092 | |
| 1093 | if (i2c_pxa_is_slavemode(i2c)) { |
| 1094 | if (isr & ISR_ITE) |
| 1095 | i2c_pxa_slave_txempty(i2c, isr); |
| 1096 | if (isr & ISR_IRF) |
| 1097 | i2c_pxa_slave_rxfull(i2c, isr); |
| 1098 | } else if (i2c->msg && (!i2c->highmode_enter)) { |
| 1099 | if (isr & ISR_ITE) |
| 1100 | i2c_pxa_irq_txempty(i2c, isr); |
| 1101 | if (isr & ISR_IRF) |
| 1102 | i2c_pxa_irq_rxfull(i2c, isr); |
| 1103 | } else if ((isr & ISR_ITE) && i2c->highmode_enter) { |
| 1104 | i2c->highmode_enter = false; |
| 1105 | wake_up(&i2c->wait); |
| 1106 | } else { |
| 1107 | i2c_pxa_scream_blue_murder(i2c, "spurious irq"); |
| 1108 | } |
| 1109 | |
| 1110 | return IRQ_HANDLED; |
| 1111 | } |
| 1112 | |
| 1113 | |
| 1114 | static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) |
| 1115 | { |
| 1116 | struct pxa_i2c *i2c = adap->algo_data; |
| 1117 | int ret, i; |
| 1118 | |
| 1119 | for (i = adap->retries; i >= 0; i--) { |
| 1120 | ret = i2c_pxa_do_xfer(i2c, msgs, num); |
| 1121 | if (ret != I2C_RETRY) |
| 1122 | goto out; |
| 1123 | |
| 1124 | if (i2c_debug) |
| 1125 | dev_dbg(&adap->dev, "Retrying transmission\n"); |
| 1126 | udelay(100); |
| 1127 | } |
| 1128 | i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); |
| 1129 | ret = -EREMOTEIO; |
| 1130 | out: |
| 1131 | i2c_pxa_set_slave(i2c, ret); |
| 1132 | return ret; |
| 1133 | } |
| 1134 | |
| 1135 | static u32 i2c_pxa_functionality(struct i2c_adapter *adap) |
| 1136 | { |
| 1137 | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | |
| 1138 | I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART; |
| 1139 | } |
| 1140 | |
| 1141 | static const struct i2c_algorithm i2c_pxa_algorithm = { |
| 1142 | .master_xfer = i2c_pxa_xfer, |
| 1143 | .functionality = i2c_pxa_functionality, |
| 1144 | }; |
| 1145 | |
| 1146 | static const struct i2c_algorithm i2c_pxa_pio_algorithm = { |
| 1147 | .master_xfer = i2c_pxa_pio_xfer, |
| 1148 | .functionality = i2c_pxa_functionality, |
| 1149 | }; |
| 1150 | |
| 1151 | static const struct of_device_id i2c_pxa_dt_ids[] = { |
| 1152 | { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, |
| 1153 | { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, |
| 1154 | { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 }, |
| 1155 | { .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 }, |
| 1156 | {} |
| 1157 | }; |
| 1158 | MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); |
| 1159 | |
| 1160 | static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, |
| 1161 | enum pxa_i2c_types *i2c_types) |
| 1162 | { |
| 1163 | struct device_node *np = pdev->dev.of_node; |
| 1164 | const struct of_device_id *of_id = |
| 1165 | of_match_device(i2c_pxa_dt_ids, &pdev->dev); |
| 1166 | |
| 1167 | if (!of_id) |
| 1168 | return 1; |
| 1169 | |
| 1170 | /* For device tree we always use the dynamic or alias-assigned ID */ |
| 1171 | i2c->adap.nr = -1; |
| 1172 | |
| 1173 | if (of_get_property(np, "mrvl,i2c-polling", NULL)) |
| 1174 | i2c->use_pio = 1; |
| 1175 | if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) |
| 1176 | i2c->fast_mode = 1; |
| 1177 | |
| 1178 | *i2c_types = (enum pxa_i2c_types)(of_id->data); |
| 1179 | |
| 1180 | return 0; |
| 1181 | } |
| 1182 | |
| 1183 | static int i2c_pxa_probe_pdata(struct platform_device *pdev, |
| 1184 | struct pxa_i2c *i2c, |
| 1185 | enum pxa_i2c_types *i2c_types) |
| 1186 | { |
| 1187 | struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev); |
| 1188 | const struct platform_device_id *id = platform_get_device_id(pdev); |
| 1189 | |
| 1190 | *i2c_types = id->driver_data; |
| 1191 | if (plat) { |
| 1192 | i2c->use_pio = plat->use_pio; |
| 1193 | i2c->fast_mode = plat->fast_mode; |
| 1194 | i2c->high_mode = plat->high_mode; |
| 1195 | i2c->master_code = plat->master_code; |
| 1196 | if (!i2c->master_code) |
| 1197 | i2c->master_code = 0xe; |
| 1198 | i2c->rate = plat->rate; |
| 1199 | } |
| 1200 | return 0; |
| 1201 | } |
| 1202 | |
| 1203 | static int i2c_pxa_probe(struct platform_device *dev) |
| 1204 | { |
| 1205 | struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev); |
| 1206 | enum pxa_i2c_types i2c_type; |
| 1207 | struct pxa_i2c *i2c; |
| 1208 | struct resource *res = NULL; |
| 1209 | int ret, irq; |
| 1210 | |
| 1211 | i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL); |
| 1212 | if (!i2c) |
| 1213 | return -ENOMEM; |
| 1214 | |
| 1215 | res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| 1216 | i2c->reg_base = devm_ioremap_resource(&dev->dev, res); |
| 1217 | if (IS_ERR(i2c->reg_base)) |
| 1218 | return PTR_ERR(i2c->reg_base); |
| 1219 | |
| 1220 | irq = platform_get_irq(dev, 0); |
| 1221 | if (irq < 0) { |
| 1222 | dev_err(&dev->dev, "no irq resource: %d\n", irq); |
| 1223 | return irq; |
| 1224 | } |
| 1225 | |
| 1226 | /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ |
| 1227 | i2c->adap.nr = dev->id; |
| 1228 | |
| 1229 | ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); |
| 1230 | if (ret > 0) |
| 1231 | ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); |
| 1232 | if (ret < 0) |
| 1233 | return ret; |
| 1234 | |
| 1235 | i2c->adap.owner = THIS_MODULE; |
| 1236 | i2c->adap.retries = 5; |
| 1237 | |
| 1238 | spin_lock_init(&i2c->lock); |
| 1239 | init_waitqueue_head(&i2c->wait); |
| 1240 | |
| 1241 | strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name)); |
| 1242 | |
| 1243 | i2c->clk = devm_clk_get(&dev->dev, NULL); |
| 1244 | if (IS_ERR(i2c->clk)) { |
| 1245 | dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk)); |
| 1246 | return PTR_ERR(i2c->clk); |
| 1247 | } |
| 1248 | |
| 1249 | i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; |
| 1250 | i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr; |
| 1251 | i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr; |
| 1252 | i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr; |
| 1253 | i2c->fm_mask = pxa_reg_layout[i2c_type].fm ? : ICR_FM; |
| 1254 | i2c->hs_mask = pxa_reg_layout[i2c_type].hs ? : ICR_HS; |
| 1255 | |
| 1256 | if (i2c_type != REGS_CE4100) |
| 1257 | i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; |
| 1258 | |
| 1259 | if (i2c_type == REGS_PXA910) { |
| 1260 | i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr; |
| 1261 | i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr; |
| 1262 | } |
| 1263 | |
| 1264 | i2c->iobase = res->start; |
| 1265 | i2c->iosize = resource_size(res); |
| 1266 | |
| 1267 | i2c->irq = irq; |
| 1268 | |
| 1269 | i2c->slave_addr = I2C_PXA_SLAVE_ADDR; |
| 1270 | i2c->highmode_enter = false; |
| 1271 | |
| 1272 | if (plat) { |
| 1273 | #ifdef CONFIG_I2C_PXA_SLAVE |
| 1274 | i2c->slave_addr = plat->slave_addr; |
| 1275 | i2c->slave = plat->slave; |
| 1276 | #endif |
| 1277 | i2c->adap.class = plat->class; |
| 1278 | } |
| 1279 | |
| 1280 | if (i2c->high_mode) { |
| 1281 | if (i2c->rate) { |
| 1282 | clk_set_rate(i2c->clk, i2c->rate); |
| 1283 | pr_info("i2c: <%s> set rate to %ld\n", |
| 1284 | i2c->adap.name, clk_get_rate(i2c->clk)); |
| 1285 | } else |
| 1286 | pr_warn("i2c: <%s> clock rate not set\n", |
| 1287 | i2c->adap.name); |
| 1288 | } |
| 1289 | |
| 1290 | clk_prepare_enable(i2c->clk); |
| 1291 | |
| 1292 | if (i2c->use_pio) { |
| 1293 | i2c->adap.algo = &i2c_pxa_pio_algorithm; |
| 1294 | } else { |
| 1295 | i2c->adap.algo = &i2c_pxa_algorithm; |
| 1296 | ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler, |
| 1297 | IRQF_SHARED | IRQF_NO_SUSPEND, |
| 1298 | dev_name(&dev->dev), i2c); |
| 1299 | if (ret) { |
| 1300 | dev_err(&dev->dev, "failed to request irq: %d\n", ret); |
| 1301 | goto ereqirq; |
| 1302 | } |
| 1303 | } |
| 1304 | |
| 1305 | i2c_pxa_reset(i2c); |
| 1306 | |
| 1307 | i2c->adap.algo_data = i2c; |
| 1308 | i2c->adap.dev.parent = &dev->dev; |
| 1309 | #ifdef CONFIG_OF |
| 1310 | i2c->adap.dev.of_node = dev->dev.of_node; |
| 1311 | #endif |
| 1312 | |
| 1313 | ret = i2c_add_numbered_adapter(&i2c->adap); |
| 1314 | if (ret < 0) |
| 1315 | goto ereqirq; |
| 1316 | |
| 1317 | platform_set_drvdata(dev, i2c); |
| 1318 | |
| 1319 | #ifdef CONFIG_I2C_PXA_SLAVE |
| 1320 | dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n", |
| 1321 | i2c->slave_addr); |
| 1322 | #else |
| 1323 | dev_info(&i2c->adap.dev, " PXA I2C adapter\n"); |
| 1324 | #endif |
| 1325 | return 0; |
| 1326 | |
| 1327 | ereqirq: |
| 1328 | clk_disable_unprepare(i2c->clk); |
| 1329 | return ret; |
| 1330 | } |
| 1331 | |
| 1332 | static int i2c_pxa_remove(struct platform_device *dev) |
| 1333 | { |
| 1334 | struct pxa_i2c *i2c = platform_get_drvdata(dev); |
| 1335 | |
| 1336 | i2c_del_adapter(&i2c->adap); |
| 1337 | |
| 1338 | clk_disable_unprepare(i2c->clk); |
| 1339 | |
| 1340 | return 0; |
| 1341 | } |
| 1342 | |
| 1343 | #ifdef CONFIG_PM |
| 1344 | static int i2c_pxa_suspend_noirq(struct device *dev) |
| 1345 | { |
| 1346 | struct pxa_i2c *i2c = dev_get_drvdata(dev); |
| 1347 | |
| 1348 | clk_disable(i2c->clk); |
| 1349 | |
| 1350 | return 0; |
| 1351 | } |
| 1352 | |
| 1353 | static int i2c_pxa_resume_noirq(struct device *dev) |
| 1354 | { |
| 1355 | struct pxa_i2c *i2c = dev_get_drvdata(dev); |
| 1356 | |
| 1357 | clk_enable(i2c->clk); |
| 1358 | i2c_pxa_reset(i2c); |
| 1359 | |
| 1360 | return 0; |
| 1361 | } |
| 1362 | |
| 1363 | static const struct dev_pm_ops i2c_pxa_dev_pm_ops = { |
| 1364 | .suspend_noirq = i2c_pxa_suspend_noirq, |
| 1365 | .resume_noirq = i2c_pxa_resume_noirq, |
| 1366 | }; |
| 1367 | |
| 1368 | #define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops) |
| 1369 | #else |
| 1370 | #define I2C_PXA_DEV_PM_OPS NULL |
| 1371 | #endif |
| 1372 | |
| 1373 | static struct platform_driver i2c_pxa_driver = { |
| 1374 | .probe = i2c_pxa_probe, |
| 1375 | .remove = i2c_pxa_remove, |
| 1376 | .driver = { |
| 1377 | .name = "pxa2xx-i2c", |
| 1378 | .pm = I2C_PXA_DEV_PM_OPS, |
| 1379 | .of_match_table = i2c_pxa_dt_ids, |
| 1380 | }, |
| 1381 | .id_table = i2c_pxa_id_table, |
| 1382 | }; |
| 1383 | |
| 1384 | static int __init i2c_adap_pxa_init(void) |
| 1385 | { |
| 1386 | return platform_driver_register(&i2c_pxa_driver); |
| 1387 | } |
| 1388 | |
| 1389 | static void __exit i2c_adap_pxa_exit(void) |
| 1390 | { |
| 1391 | platform_driver_unregister(&i2c_pxa_driver); |
| 1392 | } |
| 1393 | |
| 1394 | MODULE_LICENSE("GPL"); |
| 1395 | MODULE_ALIAS("platform:pxa2xx-i2c"); |
| 1396 | |
| 1397 | subsys_initcall(i2c_adap_pxa_init); |
| 1398 | module_exit(i2c_adap_pxa_exit); |