David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware |
| 4 | * monitoring |
| 5 | * Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>, |
| 6 | * Kyösti Mälkki <kmalkki@cc.hut.fi> |
| 7 | * Copyright (c) 2005 Maarten Deprez <maartendeprez@users.sourceforge.net> |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 8 | */ |
| 9 | |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/init.h> |
| 12 | #include <linux/slab.h> |
| 13 | #include <linux/jiffies.h> |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/hwmon.h> |
| 16 | #include <linux/hwmon-sysfs.h> |
| 17 | #include <linux/hwmon-vid.h> |
| 18 | #include <linux/err.h> |
| 19 | #include <linux/mutex.h> |
| 20 | #include <linux/sysfs.h> |
| 21 | |
| 22 | /* Type of the extra sensor */ |
| 23 | static unsigned short extra_sensor_type; |
| 24 | module_param(extra_sensor_type, ushort, 0); |
| 25 | MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)"); |
| 26 | |
| 27 | /* Addresses to scan */ |
| 28 | static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; |
| 29 | |
| 30 | /* |
| 31 | * Many GL520 constants specified below |
| 32 | * One of the inputs can be configured as either temp or voltage. |
| 33 | * That's why _TEMP2 and _IN4 access the same register |
| 34 | */ |
| 35 | |
| 36 | /* The GL520 registers */ |
| 37 | #define GL520_REG_CHIP_ID 0x00 |
| 38 | #define GL520_REG_REVISION 0x01 |
| 39 | #define GL520_REG_CONF 0x03 |
| 40 | #define GL520_REG_MASK 0x11 |
| 41 | |
| 42 | #define GL520_REG_VID_INPUT 0x02 |
| 43 | |
| 44 | static const u8 GL520_REG_IN_INPUT[] = { 0x15, 0x14, 0x13, 0x0d, 0x0e }; |
| 45 | static const u8 GL520_REG_IN_LIMIT[] = { 0x0c, 0x09, 0x0a, 0x0b }; |
| 46 | static const u8 GL520_REG_IN_MIN[] = { 0x0c, 0x09, 0x0a, 0x0b, 0x18 }; |
| 47 | static const u8 GL520_REG_IN_MAX[] = { 0x0c, 0x09, 0x0a, 0x0b, 0x17 }; |
| 48 | |
| 49 | static const u8 GL520_REG_TEMP_INPUT[] = { 0x04, 0x0e }; |
| 50 | static const u8 GL520_REG_TEMP_MAX[] = { 0x05, 0x17 }; |
| 51 | static const u8 GL520_REG_TEMP_MAX_HYST[] = { 0x06, 0x18 }; |
| 52 | |
| 53 | #define GL520_REG_FAN_INPUT 0x07 |
| 54 | #define GL520_REG_FAN_MIN 0x08 |
| 55 | #define GL520_REG_FAN_DIV 0x0f |
| 56 | #define GL520_REG_FAN_OFF GL520_REG_FAN_DIV |
| 57 | |
| 58 | #define GL520_REG_ALARMS 0x12 |
| 59 | #define GL520_REG_BEEP_MASK 0x10 |
| 60 | #define GL520_REG_BEEP_ENABLE GL520_REG_CONF |
| 61 | |
| 62 | /* Client data */ |
| 63 | struct gl520_data { |
| 64 | struct i2c_client *client; |
| 65 | const struct attribute_group *groups[3]; |
| 66 | struct mutex update_lock; |
| 67 | char valid; /* zero until the following fields are valid */ |
| 68 | unsigned long last_updated; /* in jiffies */ |
| 69 | |
| 70 | u8 vid; |
| 71 | u8 vrm; |
| 72 | u8 in_input[5]; /* [0] = VVD */ |
| 73 | u8 in_min[5]; /* [0] = VDD */ |
| 74 | u8 in_max[5]; /* [0] = VDD */ |
| 75 | u8 fan_input[2]; |
| 76 | u8 fan_min[2]; |
| 77 | u8 fan_div[2]; |
| 78 | u8 fan_off; |
| 79 | u8 temp_input[2]; |
| 80 | u8 temp_max[2]; |
| 81 | u8 temp_max_hyst[2]; |
| 82 | u8 alarms; |
| 83 | u8 beep_enable; |
| 84 | u8 beep_mask; |
| 85 | u8 alarm_mask; |
| 86 | u8 two_temps; |
| 87 | }; |
| 88 | |
| 89 | /* |
| 90 | * Registers 0x07 to 0x0c are word-sized, others are byte-sized |
| 91 | * GL520 uses a high-byte first convention |
| 92 | */ |
| 93 | static int gl520_read_value(struct i2c_client *client, u8 reg) |
| 94 | { |
| 95 | if ((reg >= 0x07) && (reg <= 0x0c)) |
| 96 | return i2c_smbus_read_word_swapped(client, reg); |
| 97 | else |
| 98 | return i2c_smbus_read_byte_data(client, reg); |
| 99 | } |
| 100 | |
| 101 | static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value) |
| 102 | { |
| 103 | if ((reg >= 0x07) && (reg <= 0x0c)) |
| 104 | return i2c_smbus_write_word_swapped(client, reg, value); |
| 105 | else |
| 106 | return i2c_smbus_write_byte_data(client, reg, value); |
| 107 | } |
| 108 | |
| 109 | static struct gl520_data *gl520_update_device(struct device *dev) |
| 110 | { |
| 111 | struct gl520_data *data = dev_get_drvdata(dev); |
| 112 | struct i2c_client *client = data->client; |
| 113 | int val, i; |
| 114 | |
| 115 | mutex_lock(&data->update_lock); |
| 116 | |
| 117 | if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { |
| 118 | |
| 119 | dev_dbg(&client->dev, "Starting gl520sm update\n"); |
| 120 | |
| 121 | data->alarms = gl520_read_value(client, GL520_REG_ALARMS); |
| 122 | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); |
| 123 | data->vid = gl520_read_value(client, |
| 124 | GL520_REG_VID_INPUT) & 0x1f; |
| 125 | |
| 126 | for (i = 0; i < 4; i++) { |
| 127 | data->in_input[i] = gl520_read_value(client, |
| 128 | GL520_REG_IN_INPUT[i]); |
| 129 | val = gl520_read_value(client, GL520_REG_IN_LIMIT[i]); |
| 130 | data->in_min[i] = val & 0xff; |
| 131 | data->in_max[i] = (val >> 8) & 0xff; |
| 132 | } |
| 133 | |
| 134 | val = gl520_read_value(client, GL520_REG_FAN_INPUT); |
| 135 | data->fan_input[0] = (val >> 8) & 0xff; |
| 136 | data->fan_input[1] = val & 0xff; |
| 137 | |
| 138 | val = gl520_read_value(client, GL520_REG_FAN_MIN); |
| 139 | data->fan_min[0] = (val >> 8) & 0xff; |
| 140 | data->fan_min[1] = val & 0xff; |
| 141 | |
| 142 | data->temp_input[0] = gl520_read_value(client, |
| 143 | GL520_REG_TEMP_INPUT[0]); |
| 144 | data->temp_max[0] = gl520_read_value(client, |
| 145 | GL520_REG_TEMP_MAX[0]); |
| 146 | data->temp_max_hyst[0] = gl520_read_value(client, |
| 147 | GL520_REG_TEMP_MAX_HYST[0]); |
| 148 | |
| 149 | val = gl520_read_value(client, GL520_REG_FAN_DIV); |
| 150 | data->fan_div[0] = (val >> 6) & 0x03; |
| 151 | data->fan_div[1] = (val >> 4) & 0x03; |
| 152 | data->fan_off = (val >> 2) & 0x01; |
| 153 | |
| 154 | data->alarms &= data->alarm_mask; |
| 155 | |
| 156 | val = gl520_read_value(client, GL520_REG_CONF); |
| 157 | data->beep_enable = !((val >> 2) & 1); |
| 158 | |
| 159 | /* Temp1 and Vin4 are the same input */ |
| 160 | if (data->two_temps) { |
| 161 | data->temp_input[1] = gl520_read_value(client, |
| 162 | GL520_REG_TEMP_INPUT[1]); |
| 163 | data->temp_max[1] = gl520_read_value(client, |
| 164 | GL520_REG_TEMP_MAX[1]); |
| 165 | data->temp_max_hyst[1] = gl520_read_value(client, |
| 166 | GL520_REG_TEMP_MAX_HYST[1]); |
| 167 | } else { |
| 168 | data->in_input[4] = gl520_read_value(client, |
| 169 | GL520_REG_IN_INPUT[4]); |
| 170 | data->in_min[4] = gl520_read_value(client, |
| 171 | GL520_REG_IN_MIN[4]); |
| 172 | data->in_max[4] = gl520_read_value(client, |
| 173 | GL520_REG_IN_MAX[4]); |
| 174 | } |
| 175 | |
| 176 | data->last_updated = jiffies; |
| 177 | data->valid = 1; |
| 178 | } |
| 179 | |
| 180 | mutex_unlock(&data->update_lock); |
| 181 | |
| 182 | return data; |
| 183 | } |
| 184 | |
| 185 | /* |
| 186 | * Sysfs stuff |
| 187 | */ |
| 188 | |
| 189 | static ssize_t cpu0_vid_show(struct device *dev, |
| 190 | struct device_attribute *attr, char *buf) |
| 191 | { |
| 192 | struct gl520_data *data = gl520_update_device(dev); |
| 193 | return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); |
| 194 | } |
| 195 | static DEVICE_ATTR_RO(cpu0_vid); |
| 196 | |
| 197 | #define VDD_FROM_REG(val) DIV_ROUND_CLOSEST((val) * 95, 4) |
| 198 | #define VDD_CLAMP(val) clamp_val(val, 0, 255 * 95 / 4) |
| 199 | #define VDD_TO_REG(val) DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95) |
| 200 | |
| 201 | #define IN_FROM_REG(val) ((val) * 19) |
| 202 | #define IN_CLAMP(val) clamp_val(val, 0, 255 * 19) |
| 203 | #define IN_TO_REG(val) DIV_ROUND_CLOSEST(IN_CLAMP(val), 19) |
| 204 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 205 | static ssize_t in_input_show(struct device *dev, |
| 206 | struct device_attribute *attr, char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 207 | { |
| 208 | int n = to_sensor_dev_attr(attr)->index; |
| 209 | struct gl520_data *data = gl520_update_device(dev); |
| 210 | u8 r = data->in_input[n]; |
| 211 | |
| 212 | if (n == 0) |
| 213 | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); |
| 214 | else |
| 215 | return sprintf(buf, "%d\n", IN_FROM_REG(r)); |
| 216 | } |
| 217 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 218 | static ssize_t in_min_show(struct device *dev, struct device_attribute *attr, |
| 219 | char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 220 | { |
| 221 | int n = to_sensor_dev_attr(attr)->index; |
| 222 | struct gl520_data *data = gl520_update_device(dev); |
| 223 | u8 r = data->in_min[n]; |
| 224 | |
| 225 | if (n == 0) |
| 226 | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); |
| 227 | else |
| 228 | return sprintf(buf, "%d\n", IN_FROM_REG(r)); |
| 229 | } |
| 230 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 231 | static ssize_t in_max_show(struct device *dev, struct device_attribute *attr, |
| 232 | char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 233 | { |
| 234 | int n = to_sensor_dev_attr(attr)->index; |
| 235 | struct gl520_data *data = gl520_update_device(dev); |
| 236 | u8 r = data->in_max[n]; |
| 237 | |
| 238 | if (n == 0) |
| 239 | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); |
| 240 | else |
| 241 | return sprintf(buf, "%d\n", IN_FROM_REG(r)); |
| 242 | } |
| 243 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 244 | static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, |
| 245 | const char *buf, size_t count) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 246 | { |
| 247 | struct gl520_data *data = dev_get_drvdata(dev); |
| 248 | struct i2c_client *client = data->client; |
| 249 | int n = to_sensor_dev_attr(attr)->index; |
| 250 | u8 r; |
| 251 | long v; |
| 252 | int err; |
| 253 | |
| 254 | err = kstrtol(buf, 10, &v); |
| 255 | if (err) |
| 256 | return err; |
| 257 | |
| 258 | mutex_lock(&data->update_lock); |
| 259 | |
| 260 | if (n == 0) |
| 261 | r = VDD_TO_REG(v); |
| 262 | else |
| 263 | r = IN_TO_REG(v); |
| 264 | |
| 265 | data->in_min[n] = r; |
| 266 | |
| 267 | if (n < 4) |
| 268 | gl520_write_value(client, GL520_REG_IN_MIN[n], |
| 269 | (gl520_read_value(client, GL520_REG_IN_MIN[n]) |
| 270 | & ~0xff) | r); |
| 271 | else |
| 272 | gl520_write_value(client, GL520_REG_IN_MIN[n], r); |
| 273 | |
| 274 | mutex_unlock(&data->update_lock); |
| 275 | return count; |
| 276 | } |
| 277 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 278 | static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, |
| 279 | const char *buf, size_t count) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 280 | { |
| 281 | struct gl520_data *data = dev_get_drvdata(dev); |
| 282 | struct i2c_client *client = data->client; |
| 283 | int n = to_sensor_dev_attr(attr)->index; |
| 284 | u8 r; |
| 285 | long v; |
| 286 | int err; |
| 287 | |
| 288 | err = kstrtol(buf, 10, &v); |
| 289 | if (err) |
| 290 | return err; |
| 291 | |
| 292 | if (n == 0) |
| 293 | r = VDD_TO_REG(v); |
| 294 | else |
| 295 | r = IN_TO_REG(v); |
| 296 | |
| 297 | mutex_lock(&data->update_lock); |
| 298 | |
| 299 | data->in_max[n] = r; |
| 300 | |
| 301 | if (n < 4) |
| 302 | gl520_write_value(client, GL520_REG_IN_MAX[n], |
| 303 | (gl520_read_value(client, GL520_REG_IN_MAX[n]) |
| 304 | & ~0xff00) | (r << 8)); |
| 305 | else |
| 306 | gl520_write_value(client, GL520_REG_IN_MAX[n], r); |
| 307 | |
| 308 | mutex_unlock(&data->update_lock); |
| 309 | return count; |
| 310 | } |
| 311 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 312 | static SENSOR_DEVICE_ATTR_RO(in0_input, in_input, 0); |
| 313 | static SENSOR_DEVICE_ATTR_RO(in1_input, in_input, 1); |
| 314 | static SENSOR_DEVICE_ATTR_RO(in2_input, in_input, 2); |
| 315 | static SENSOR_DEVICE_ATTR_RO(in3_input, in_input, 3); |
| 316 | static SENSOR_DEVICE_ATTR_RO(in4_input, in_input, 4); |
| 317 | static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); |
| 318 | static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); |
| 319 | static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); |
| 320 | static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); |
| 321 | static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); |
| 322 | static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); |
| 323 | static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); |
| 324 | static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); |
| 325 | static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); |
| 326 | static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 327 | |
| 328 | #define DIV_FROM_REG(val) (1 << (val)) |
| 329 | #define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) << (div)))) |
| 330 | |
| 331 | #define FAN_BASE(div) (480000 >> (div)) |
| 332 | #define FAN_CLAMP(val, div) clamp_val(val, FAN_BASE(div) / 255, \ |
| 333 | FAN_BASE(div)) |
| 334 | #define FAN_TO_REG(val, div) ((val) == 0 ? 0 : \ |
| 335 | DIV_ROUND_CLOSEST(480000, \ |
| 336 | FAN_CLAMP(val, div) << (div))) |
| 337 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 338 | static ssize_t fan_input_show(struct device *dev, |
| 339 | struct device_attribute *attr, char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 340 | { |
| 341 | int n = to_sensor_dev_attr(attr)->index; |
| 342 | struct gl520_data *data = gl520_update_device(dev); |
| 343 | |
| 344 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n], |
| 345 | data->fan_div[n])); |
| 346 | } |
| 347 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 348 | static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, |
| 349 | char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 350 | { |
| 351 | int n = to_sensor_dev_attr(attr)->index; |
| 352 | struct gl520_data *data = gl520_update_device(dev); |
| 353 | |
| 354 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n], |
| 355 | data->fan_div[n])); |
| 356 | } |
| 357 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 358 | static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, |
| 359 | char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 360 | { |
| 361 | int n = to_sensor_dev_attr(attr)->index; |
| 362 | struct gl520_data *data = gl520_update_device(dev); |
| 363 | |
| 364 | return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n])); |
| 365 | } |
| 366 | |
| 367 | static ssize_t fan1_off_show(struct device *dev, |
| 368 | struct device_attribute *attr, char *buf) |
| 369 | { |
| 370 | struct gl520_data *data = gl520_update_device(dev); |
| 371 | return sprintf(buf, "%d\n", data->fan_off); |
| 372 | } |
| 373 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 374 | static ssize_t fan_min_store(struct device *dev, |
| 375 | struct device_attribute *attr, const char *buf, |
| 376 | size_t count) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 377 | { |
| 378 | struct gl520_data *data = dev_get_drvdata(dev); |
| 379 | struct i2c_client *client = data->client; |
| 380 | int n = to_sensor_dev_attr(attr)->index; |
| 381 | u8 r; |
| 382 | unsigned long v; |
| 383 | int err; |
| 384 | |
| 385 | err = kstrtoul(buf, 10, &v); |
| 386 | if (err) |
| 387 | return err; |
| 388 | |
| 389 | mutex_lock(&data->update_lock); |
| 390 | r = FAN_TO_REG(v, data->fan_div[n]); |
| 391 | data->fan_min[n] = r; |
| 392 | |
| 393 | if (n == 0) |
| 394 | gl520_write_value(client, GL520_REG_FAN_MIN, |
| 395 | (gl520_read_value(client, GL520_REG_FAN_MIN) |
| 396 | & ~0xff00) | (r << 8)); |
| 397 | else |
| 398 | gl520_write_value(client, GL520_REG_FAN_MIN, |
| 399 | (gl520_read_value(client, GL520_REG_FAN_MIN) |
| 400 | & ~0xff) | r); |
| 401 | |
| 402 | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); |
| 403 | if (data->fan_min[n] == 0) |
| 404 | data->alarm_mask &= (n == 0) ? ~0x20 : ~0x40; |
| 405 | else |
| 406 | data->alarm_mask |= (n == 0) ? 0x20 : 0x40; |
| 407 | data->beep_mask &= data->alarm_mask; |
| 408 | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); |
| 409 | |
| 410 | mutex_unlock(&data->update_lock); |
| 411 | return count; |
| 412 | } |
| 413 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 414 | static ssize_t fan_div_store(struct device *dev, |
| 415 | struct device_attribute *attr, const char *buf, |
| 416 | size_t count) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 417 | { |
| 418 | struct gl520_data *data = dev_get_drvdata(dev); |
| 419 | struct i2c_client *client = data->client; |
| 420 | int n = to_sensor_dev_attr(attr)->index; |
| 421 | u8 r; |
| 422 | unsigned long v; |
| 423 | int err; |
| 424 | |
| 425 | err = kstrtoul(buf, 10, &v); |
| 426 | if (err) |
| 427 | return err; |
| 428 | |
| 429 | switch (v) { |
| 430 | case 1: |
| 431 | r = 0; |
| 432 | break; |
| 433 | case 2: |
| 434 | r = 1; |
| 435 | break; |
| 436 | case 4: |
| 437 | r = 2; |
| 438 | break; |
| 439 | case 8: |
| 440 | r = 3; |
| 441 | break; |
| 442 | default: |
| 443 | dev_err(&client->dev, |
| 444 | "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v); |
| 445 | return -EINVAL; |
| 446 | } |
| 447 | |
| 448 | mutex_lock(&data->update_lock); |
| 449 | data->fan_div[n] = r; |
| 450 | |
| 451 | if (n == 0) |
| 452 | gl520_write_value(client, GL520_REG_FAN_DIV, |
| 453 | (gl520_read_value(client, GL520_REG_FAN_DIV) |
| 454 | & ~0xc0) | (r << 6)); |
| 455 | else |
| 456 | gl520_write_value(client, GL520_REG_FAN_DIV, |
| 457 | (gl520_read_value(client, GL520_REG_FAN_DIV) |
| 458 | & ~0x30) | (r << 4)); |
| 459 | |
| 460 | mutex_unlock(&data->update_lock); |
| 461 | return count; |
| 462 | } |
| 463 | |
| 464 | static ssize_t fan1_off_store(struct device *dev, |
| 465 | struct device_attribute *attr, const char *buf, |
| 466 | size_t count) |
| 467 | { |
| 468 | struct gl520_data *data = dev_get_drvdata(dev); |
| 469 | struct i2c_client *client = data->client; |
| 470 | u8 r; |
| 471 | unsigned long v; |
| 472 | int err; |
| 473 | |
| 474 | err = kstrtoul(buf, 10, &v); |
| 475 | if (err) |
| 476 | return err; |
| 477 | |
| 478 | r = (v ? 1 : 0); |
| 479 | |
| 480 | mutex_lock(&data->update_lock); |
| 481 | data->fan_off = r; |
| 482 | gl520_write_value(client, GL520_REG_FAN_OFF, |
| 483 | (gl520_read_value(client, GL520_REG_FAN_OFF) |
| 484 | & ~0x0c) | (r << 2)); |
| 485 | mutex_unlock(&data->update_lock); |
| 486 | return count; |
| 487 | } |
| 488 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 489 | static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0); |
| 490 | static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1); |
| 491 | static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); |
| 492 | static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); |
| 493 | static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); |
| 494 | static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 495 | static DEVICE_ATTR_RW(fan1_off); |
| 496 | |
| 497 | #define TEMP_FROM_REG(val) (((val) - 130) * 1000) |
| 498 | #define TEMP_CLAMP(val) clamp_val(val, -130000, 125000) |
| 499 | #define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 130) |
| 500 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 501 | static ssize_t temp_input_show(struct device *dev, |
| 502 | struct device_attribute *attr, char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 503 | { |
| 504 | int n = to_sensor_dev_attr(attr)->index; |
| 505 | struct gl520_data *data = gl520_update_device(dev); |
| 506 | |
| 507 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n])); |
| 508 | } |
| 509 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 510 | static ssize_t temp_max_show(struct device *dev, |
| 511 | struct device_attribute *attr, char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 512 | { |
| 513 | int n = to_sensor_dev_attr(attr)->index; |
| 514 | struct gl520_data *data = gl520_update_device(dev); |
| 515 | |
| 516 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n])); |
| 517 | } |
| 518 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 519 | static ssize_t temp_max_hyst_show(struct device *dev, |
| 520 | struct device_attribute *attr, char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 521 | { |
| 522 | int n = to_sensor_dev_attr(attr)->index; |
| 523 | struct gl520_data *data = gl520_update_device(dev); |
| 524 | |
| 525 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n])); |
| 526 | } |
| 527 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 528 | static ssize_t temp_max_store(struct device *dev, |
| 529 | struct device_attribute *attr, const char *buf, |
| 530 | size_t count) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 531 | { |
| 532 | struct gl520_data *data = dev_get_drvdata(dev); |
| 533 | struct i2c_client *client = data->client; |
| 534 | int n = to_sensor_dev_attr(attr)->index; |
| 535 | long v; |
| 536 | int err; |
| 537 | |
| 538 | err = kstrtol(buf, 10, &v); |
| 539 | if (err) |
| 540 | return err; |
| 541 | |
| 542 | mutex_lock(&data->update_lock); |
| 543 | data->temp_max[n] = TEMP_TO_REG(v); |
| 544 | gl520_write_value(client, GL520_REG_TEMP_MAX[n], data->temp_max[n]); |
| 545 | mutex_unlock(&data->update_lock); |
| 546 | return count; |
| 547 | } |
| 548 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 549 | static ssize_t temp_max_hyst_store(struct device *dev, |
| 550 | struct device_attribute *attr, |
| 551 | const char *buf, size_t count) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 552 | { |
| 553 | struct gl520_data *data = dev_get_drvdata(dev); |
| 554 | struct i2c_client *client = data->client; |
| 555 | int n = to_sensor_dev_attr(attr)->index; |
| 556 | long v; |
| 557 | int err; |
| 558 | |
| 559 | err = kstrtol(buf, 10, &v); |
| 560 | if (err) |
| 561 | return err; |
| 562 | |
| 563 | mutex_lock(&data->update_lock); |
| 564 | data->temp_max_hyst[n] = TEMP_TO_REG(v); |
| 565 | gl520_write_value(client, GL520_REG_TEMP_MAX_HYST[n], |
| 566 | data->temp_max_hyst[n]); |
| 567 | mutex_unlock(&data->update_lock); |
| 568 | return count; |
| 569 | } |
| 570 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 571 | static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); |
| 572 | static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1); |
| 573 | static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); |
| 574 | static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); |
| 575 | static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp_max_hyst, 0); |
| 576 | static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_max_hyst, 1); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 577 | |
| 578 | static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, |
| 579 | char *buf) |
| 580 | { |
| 581 | struct gl520_data *data = gl520_update_device(dev); |
| 582 | return sprintf(buf, "%d\n", data->alarms); |
| 583 | } |
| 584 | |
| 585 | static ssize_t beep_enable_show(struct device *dev, |
| 586 | struct device_attribute *attr, char *buf) |
| 587 | { |
| 588 | struct gl520_data *data = gl520_update_device(dev); |
| 589 | return sprintf(buf, "%d\n", data->beep_enable); |
| 590 | } |
| 591 | |
| 592 | static ssize_t beep_mask_show(struct device *dev, |
| 593 | struct device_attribute *attr, char *buf) |
| 594 | { |
| 595 | struct gl520_data *data = gl520_update_device(dev); |
| 596 | return sprintf(buf, "%d\n", data->beep_mask); |
| 597 | } |
| 598 | |
| 599 | static ssize_t beep_enable_store(struct device *dev, |
| 600 | struct device_attribute *attr, |
| 601 | const char *buf, size_t count) |
| 602 | { |
| 603 | struct gl520_data *data = dev_get_drvdata(dev); |
| 604 | struct i2c_client *client = data->client; |
| 605 | u8 r; |
| 606 | unsigned long v; |
| 607 | int err; |
| 608 | |
| 609 | err = kstrtoul(buf, 10, &v); |
| 610 | if (err) |
| 611 | return err; |
| 612 | |
| 613 | r = (v ? 0 : 1); |
| 614 | |
| 615 | mutex_lock(&data->update_lock); |
| 616 | data->beep_enable = !r; |
| 617 | gl520_write_value(client, GL520_REG_BEEP_ENABLE, |
| 618 | (gl520_read_value(client, GL520_REG_BEEP_ENABLE) |
| 619 | & ~0x04) | (r << 2)); |
| 620 | mutex_unlock(&data->update_lock); |
| 621 | return count; |
| 622 | } |
| 623 | |
| 624 | static ssize_t beep_mask_store(struct device *dev, |
| 625 | struct device_attribute *attr, const char *buf, |
| 626 | size_t count) |
| 627 | { |
| 628 | struct gl520_data *data = dev_get_drvdata(dev); |
| 629 | struct i2c_client *client = data->client; |
| 630 | unsigned long r; |
| 631 | int err; |
| 632 | |
| 633 | err = kstrtoul(buf, 10, &r); |
| 634 | if (err) |
| 635 | return err; |
| 636 | |
| 637 | mutex_lock(&data->update_lock); |
| 638 | r &= data->alarm_mask; |
| 639 | data->beep_mask = r; |
| 640 | gl520_write_value(client, GL520_REG_BEEP_MASK, r); |
| 641 | mutex_unlock(&data->update_lock); |
| 642 | return count; |
| 643 | } |
| 644 | |
| 645 | static DEVICE_ATTR_RO(alarms); |
| 646 | static DEVICE_ATTR_RW(beep_enable); |
| 647 | static DEVICE_ATTR_RW(beep_mask); |
| 648 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 649 | static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, |
| 650 | char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 651 | { |
| 652 | int bit_nr = to_sensor_dev_attr(attr)->index; |
| 653 | struct gl520_data *data = gl520_update_device(dev); |
| 654 | |
| 655 | return sprintf(buf, "%d\n", (data->alarms >> bit_nr) & 1); |
| 656 | } |
| 657 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 658 | static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); |
| 659 | static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); |
| 660 | static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); |
| 661 | static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); |
| 662 | static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); |
| 663 | static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 5); |
| 664 | static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 6); |
| 665 | static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 7); |
| 666 | static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 7); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 667 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 668 | static ssize_t beep_show(struct device *dev, struct device_attribute *attr, |
| 669 | char *buf) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 670 | { |
| 671 | int bitnr = to_sensor_dev_attr(attr)->index; |
| 672 | struct gl520_data *data = gl520_update_device(dev); |
| 673 | |
| 674 | return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1); |
| 675 | } |
| 676 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 677 | static ssize_t beep_store(struct device *dev, struct device_attribute *attr, |
| 678 | const char *buf, size_t count) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 679 | { |
| 680 | struct gl520_data *data = dev_get_drvdata(dev); |
| 681 | struct i2c_client *client = data->client; |
| 682 | int bitnr = to_sensor_dev_attr(attr)->index; |
| 683 | unsigned long bit; |
| 684 | |
| 685 | int err; |
| 686 | |
| 687 | err = kstrtoul(buf, 10, &bit); |
| 688 | if (err) |
| 689 | return err; |
| 690 | if (bit & ~1) |
| 691 | return -EINVAL; |
| 692 | |
| 693 | mutex_lock(&data->update_lock); |
| 694 | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); |
| 695 | if (bit) |
| 696 | data->beep_mask |= (1 << bitnr); |
| 697 | else |
| 698 | data->beep_mask &= ~(1 << bitnr); |
| 699 | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); |
| 700 | mutex_unlock(&data->update_lock); |
| 701 | return count; |
| 702 | } |
| 703 | |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 704 | static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0); |
| 705 | static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1); |
| 706 | static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2); |
| 707 | static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3); |
| 708 | static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4); |
| 709 | static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 5); |
| 710 | static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 6); |
| 711 | static SENSOR_DEVICE_ATTR_RW(temp2_beep, beep, 7); |
| 712 | static SENSOR_DEVICE_ATTR_RW(in4_beep, beep, 7); |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 713 | |
| 714 | static struct attribute *gl520_attributes[] = { |
| 715 | &dev_attr_cpu0_vid.attr, |
| 716 | |
| 717 | &sensor_dev_attr_in0_input.dev_attr.attr, |
| 718 | &sensor_dev_attr_in0_min.dev_attr.attr, |
| 719 | &sensor_dev_attr_in0_max.dev_attr.attr, |
| 720 | &sensor_dev_attr_in0_alarm.dev_attr.attr, |
| 721 | &sensor_dev_attr_in0_beep.dev_attr.attr, |
| 722 | &sensor_dev_attr_in1_input.dev_attr.attr, |
| 723 | &sensor_dev_attr_in1_min.dev_attr.attr, |
| 724 | &sensor_dev_attr_in1_max.dev_attr.attr, |
| 725 | &sensor_dev_attr_in1_alarm.dev_attr.attr, |
| 726 | &sensor_dev_attr_in1_beep.dev_attr.attr, |
| 727 | &sensor_dev_attr_in2_input.dev_attr.attr, |
| 728 | &sensor_dev_attr_in2_min.dev_attr.attr, |
| 729 | &sensor_dev_attr_in2_max.dev_attr.attr, |
| 730 | &sensor_dev_attr_in2_alarm.dev_attr.attr, |
| 731 | &sensor_dev_attr_in2_beep.dev_attr.attr, |
| 732 | &sensor_dev_attr_in3_input.dev_attr.attr, |
| 733 | &sensor_dev_attr_in3_min.dev_attr.attr, |
| 734 | &sensor_dev_attr_in3_max.dev_attr.attr, |
| 735 | &sensor_dev_attr_in3_alarm.dev_attr.attr, |
| 736 | &sensor_dev_attr_in3_beep.dev_attr.attr, |
| 737 | |
| 738 | &sensor_dev_attr_fan1_input.dev_attr.attr, |
| 739 | &sensor_dev_attr_fan1_min.dev_attr.attr, |
| 740 | &sensor_dev_attr_fan1_div.dev_attr.attr, |
| 741 | &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
| 742 | &sensor_dev_attr_fan1_beep.dev_attr.attr, |
| 743 | &dev_attr_fan1_off.attr, |
| 744 | &sensor_dev_attr_fan2_input.dev_attr.attr, |
| 745 | &sensor_dev_attr_fan2_min.dev_attr.attr, |
| 746 | &sensor_dev_attr_fan2_div.dev_attr.attr, |
| 747 | &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
| 748 | &sensor_dev_attr_fan2_beep.dev_attr.attr, |
| 749 | |
| 750 | &sensor_dev_attr_temp1_input.dev_attr.attr, |
| 751 | &sensor_dev_attr_temp1_max.dev_attr.attr, |
| 752 | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| 753 | &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| 754 | &sensor_dev_attr_temp1_beep.dev_attr.attr, |
| 755 | |
| 756 | &dev_attr_alarms.attr, |
| 757 | &dev_attr_beep_enable.attr, |
| 758 | &dev_attr_beep_mask.attr, |
| 759 | NULL |
| 760 | }; |
| 761 | |
| 762 | static const struct attribute_group gl520_group = { |
| 763 | .attrs = gl520_attributes, |
| 764 | }; |
| 765 | |
| 766 | static struct attribute *gl520_attributes_in4[] = { |
| 767 | &sensor_dev_attr_in4_input.dev_attr.attr, |
| 768 | &sensor_dev_attr_in4_min.dev_attr.attr, |
| 769 | &sensor_dev_attr_in4_max.dev_attr.attr, |
| 770 | &sensor_dev_attr_in4_alarm.dev_attr.attr, |
| 771 | &sensor_dev_attr_in4_beep.dev_attr.attr, |
| 772 | NULL |
| 773 | }; |
| 774 | |
| 775 | static struct attribute *gl520_attributes_temp2[] = { |
| 776 | &sensor_dev_attr_temp2_input.dev_attr.attr, |
| 777 | &sensor_dev_attr_temp2_max.dev_attr.attr, |
| 778 | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, |
| 779 | &sensor_dev_attr_temp2_alarm.dev_attr.attr, |
| 780 | &sensor_dev_attr_temp2_beep.dev_attr.attr, |
| 781 | NULL |
| 782 | }; |
| 783 | |
| 784 | static const struct attribute_group gl520_group_in4 = { |
| 785 | .attrs = gl520_attributes_in4, |
| 786 | }; |
| 787 | |
| 788 | static const struct attribute_group gl520_group_temp2 = { |
| 789 | .attrs = gl520_attributes_temp2, |
| 790 | }; |
| 791 | |
| 792 | |
| 793 | /* |
| 794 | * Real code |
| 795 | */ |
| 796 | |
| 797 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
| 798 | static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info) |
| 799 | { |
| 800 | struct i2c_adapter *adapter = client->adapter; |
| 801 | |
| 802 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | |
| 803 | I2C_FUNC_SMBUS_WORD_DATA)) |
| 804 | return -ENODEV; |
| 805 | |
| 806 | /* Determine the chip type. */ |
| 807 | if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) || |
| 808 | ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) || |
| 809 | ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) { |
| 810 | dev_dbg(&client->dev, "Unknown chip type, skipping\n"); |
| 811 | return -ENODEV; |
| 812 | } |
| 813 | |
| 814 | strlcpy(info->type, "gl520sm", I2C_NAME_SIZE); |
| 815 | |
| 816 | return 0; |
| 817 | } |
| 818 | |
| 819 | /* Called when we have found a new GL520SM. */ |
| 820 | static void gl520_init_client(struct i2c_client *client) |
| 821 | { |
| 822 | struct gl520_data *data = i2c_get_clientdata(client); |
| 823 | u8 oldconf, conf; |
| 824 | |
| 825 | conf = oldconf = gl520_read_value(client, GL520_REG_CONF); |
| 826 | |
| 827 | data->alarm_mask = 0xff; |
| 828 | data->vrm = vid_which_vrm(); |
| 829 | |
| 830 | if (extra_sensor_type == 1) |
| 831 | conf &= ~0x10; |
| 832 | else if (extra_sensor_type == 2) |
| 833 | conf |= 0x10; |
| 834 | data->two_temps = !(conf & 0x10); |
| 835 | |
| 836 | /* If IRQ# is disabled, we can safely force comparator mode */ |
| 837 | if (!(conf & 0x20)) |
| 838 | conf &= 0xf7; |
| 839 | |
| 840 | /* Enable monitoring if needed */ |
| 841 | conf |= 0x40; |
| 842 | |
| 843 | if (conf != oldconf) |
| 844 | gl520_write_value(client, GL520_REG_CONF, conf); |
| 845 | |
| 846 | gl520_update_device(&(client->dev)); |
| 847 | |
| 848 | if (data->fan_min[0] == 0) |
| 849 | data->alarm_mask &= ~0x20; |
| 850 | if (data->fan_min[1] == 0) |
| 851 | data->alarm_mask &= ~0x40; |
| 852 | |
| 853 | data->beep_mask &= data->alarm_mask; |
| 854 | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); |
| 855 | } |
| 856 | |
| 857 | static int gl520_probe(struct i2c_client *client, |
| 858 | const struct i2c_device_id *id) |
| 859 | { |
| 860 | struct device *dev = &client->dev; |
| 861 | struct device *hwmon_dev; |
| 862 | struct gl520_data *data; |
| 863 | |
| 864 | data = devm_kzalloc(dev, sizeof(struct gl520_data), GFP_KERNEL); |
| 865 | if (!data) |
| 866 | return -ENOMEM; |
| 867 | |
| 868 | i2c_set_clientdata(client, data); |
| 869 | mutex_init(&data->update_lock); |
| 870 | data->client = client; |
| 871 | |
| 872 | /* Initialize the GL520SM chip */ |
| 873 | gl520_init_client(client); |
| 874 | |
| 875 | /* sysfs hooks */ |
| 876 | data->groups[0] = &gl520_group; |
| 877 | |
| 878 | if (data->two_temps) |
| 879 | data->groups[1] = &gl520_group_temp2; |
| 880 | else |
| 881 | data->groups[1] = &gl520_group_in4; |
| 882 | |
| 883 | hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, |
| 884 | data, data->groups); |
| 885 | return PTR_ERR_OR_ZERO(hwmon_dev); |
| 886 | } |
| 887 | |
| 888 | static const struct i2c_device_id gl520_id[] = { |
| 889 | { "gl520sm", 0 }, |
| 890 | { } |
| 891 | }; |
| 892 | MODULE_DEVICE_TABLE(i2c, gl520_id); |
| 893 | |
| 894 | static struct i2c_driver gl520_driver = { |
| 895 | .class = I2C_CLASS_HWMON, |
| 896 | .driver = { |
| 897 | .name = "gl520sm", |
| 898 | }, |
| 899 | .probe = gl520_probe, |
| 900 | .id_table = gl520_id, |
| 901 | .detect = gl520_detect, |
| 902 | .address_list = normal_i2c, |
| 903 | }; |
| 904 | |
| 905 | module_i2c_driver(gl520_driver); |
| 906 | |
| 907 | MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " |
| 908 | "Kyösti Mälkki <kmalkki@cc.hut.fi>, " |
| 909 | "Maarten Deprez <maartendeprez@users.sourceforge.net>"); |
| 910 | MODULE_DESCRIPTION("GL520SM driver"); |
| 911 | MODULE_LICENSE("GPL"); |