David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * NEC NL8048HL11 Panel Driver |
| 4 | * |
| 5 | * Copyright (C) 2019 Texas Instruments Incorporated |
| 6 | * |
| 7 | * Based on the omapdrm-specific panel-nec-nl8048hl11 driver |
| 8 | * |
| 9 | * Copyright (C) 2010 Texas Instruments Incorporated |
| 10 | * Author: Erik Gilling <konkers@android.com> |
| 11 | */ |
| 12 | |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/gpio/consumer.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/pm.h> |
| 17 | #include <linux/spi/spi.h> |
| 18 | |
| 19 | #include <drm/drm_connector.h> |
| 20 | #include <drm/drm_modes.h> |
| 21 | #include <drm/drm_panel.h> |
| 22 | |
| 23 | struct nl8048_panel { |
| 24 | struct drm_panel panel; |
| 25 | |
| 26 | struct spi_device *spi; |
| 27 | struct gpio_desc *reset_gpio; |
| 28 | }; |
| 29 | |
| 30 | #define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel) |
| 31 | |
| 32 | static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr, |
| 33 | unsigned char value) |
| 34 | { |
| 35 | u8 data[4] = { value, 0x01, addr, 0x00 }; |
| 36 | int ret; |
| 37 | |
| 38 | ret = spi_write(lcd->spi, data, sizeof(data)); |
| 39 | if (ret) |
| 40 | dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n", |
| 41 | addr, ret); |
| 42 | |
| 43 | return ret; |
| 44 | } |
| 45 | |
| 46 | static int nl8048_init(struct nl8048_panel *lcd) |
| 47 | { |
| 48 | static const struct { |
| 49 | unsigned char addr; |
| 50 | unsigned char data; |
| 51 | } nl8048_init_seq[] = { |
| 52 | { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, |
| 53 | { 5, 0x14 }, { 6, 0x24 }, { 16, 0xd7 }, { 17, 0x00 }, |
| 54 | { 18, 0x00 }, { 19, 0x55 }, { 20, 0x01 }, { 21, 0x70 }, |
| 55 | { 22, 0x1e }, { 23, 0x25 }, { 24, 0x25 }, { 25, 0x02 }, |
| 56 | { 26, 0x02 }, { 27, 0xa0 }, { 32, 0x2f }, { 33, 0x0f }, |
| 57 | { 34, 0x0f }, { 35, 0x0f }, { 36, 0x0f }, { 37, 0x0f }, |
| 58 | { 38, 0x0f }, { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, |
| 59 | { 42, 0x02 }, { 43, 0x0f }, { 44, 0x0f }, { 45, 0x0f }, |
| 60 | { 46, 0x0f }, { 47, 0x0f }, { 48, 0x0f }, { 49, 0x0f }, |
| 61 | { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 }, |
| 62 | { 80, 0x0c }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, |
| 63 | { 86, 0x14 }, { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, |
| 64 | { 92, 0x02 }, { 93, 0x0c }, { 94, 0x1c }, { 95, 0x27 }, |
| 65 | { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, { 103, 0x27 }, |
| 66 | { 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c }, |
| 67 | { 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 }, |
| 68 | { 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 }, |
| 69 | { 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 }, |
| 70 | { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 }, |
| 71 | { 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 }, |
| 72 | { 157, 0x00 }, |
| 73 | }; |
| 74 | |
| 75 | unsigned int i; |
| 76 | int ret; |
| 77 | |
| 78 | for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) { |
| 79 | ret = nl8048_write(lcd, nl8048_init_seq[i].addr, |
| 80 | nl8048_init_seq[i].data); |
| 81 | if (ret < 0) |
| 82 | return ret; |
| 83 | } |
| 84 | |
| 85 | udelay(20); |
| 86 | |
| 87 | return nl8048_write(lcd, 2, 0x00); |
| 88 | } |
| 89 | |
| 90 | static int nl8048_disable(struct drm_panel *panel) |
| 91 | { |
| 92 | struct nl8048_panel *lcd = to_nl8048_device(panel); |
| 93 | |
| 94 | gpiod_set_value_cansleep(lcd->reset_gpio, 0); |
| 95 | |
| 96 | return 0; |
| 97 | } |
| 98 | |
| 99 | static int nl8048_enable(struct drm_panel *panel) |
| 100 | { |
| 101 | struct nl8048_panel *lcd = to_nl8048_device(panel); |
| 102 | |
| 103 | gpiod_set_value_cansleep(lcd->reset_gpio, 1); |
| 104 | |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | static const struct drm_display_mode nl8048_mode = { |
| 109 | /* NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */ |
| 110 | .clock = 23800, |
| 111 | .hdisplay = 800, |
| 112 | .hsync_start = 800 + 6, |
| 113 | .hsync_end = 800 + 6 + 1, |
| 114 | .htotal = 800 + 6 + 1 + 4, |
| 115 | .vdisplay = 480, |
| 116 | .vsync_start = 480 + 3, |
| 117 | .vsync_end = 480 + 3 + 1, |
| 118 | .vtotal = 480 + 3 + 1 + 4, |
| 119 | .vrefresh = 60, |
| 120 | .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, |
| 121 | .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, |
| 122 | .width_mm = 89, |
| 123 | .height_mm = 53, |
| 124 | }; |
| 125 | |
| 126 | static int nl8048_get_modes(struct drm_panel *panel) |
| 127 | { |
| 128 | struct drm_connector *connector = panel->connector; |
| 129 | struct drm_display_mode *mode; |
| 130 | |
| 131 | mode = drm_mode_duplicate(panel->drm, &nl8048_mode); |
| 132 | if (!mode) |
| 133 | return -ENOMEM; |
| 134 | |
| 135 | drm_mode_set_name(mode); |
| 136 | drm_mode_probed_add(connector, mode); |
| 137 | |
| 138 | connector->display_info.width_mm = nl8048_mode.width_mm; |
| 139 | connector->display_info.height_mm = nl8048_mode.height_mm; |
| 140 | connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH |
| 141 | | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE |
| 142 | | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE; |
| 143 | |
| 144 | return 1; |
| 145 | } |
| 146 | |
| 147 | static const struct drm_panel_funcs nl8048_funcs = { |
| 148 | .disable = nl8048_disable, |
| 149 | .enable = nl8048_enable, |
| 150 | .get_modes = nl8048_get_modes, |
| 151 | }; |
| 152 | |
| 153 | static int __maybe_unused nl8048_suspend(struct device *dev) |
| 154 | { |
| 155 | struct nl8048_panel *lcd = dev_get_drvdata(dev); |
| 156 | |
| 157 | nl8048_write(lcd, 2, 0x01); |
| 158 | msleep(40); |
| 159 | |
| 160 | return 0; |
| 161 | } |
| 162 | |
| 163 | static int __maybe_unused nl8048_resume(struct device *dev) |
| 164 | { |
| 165 | struct nl8048_panel *lcd = dev_get_drvdata(dev); |
| 166 | |
| 167 | /* Reinitialize the panel. */ |
| 168 | spi_setup(lcd->spi); |
| 169 | nl8048_write(lcd, 2, 0x00); |
| 170 | nl8048_init(lcd); |
| 171 | |
| 172 | return 0; |
| 173 | } |
| 174 | |
| 175 | static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume); |
| 176 | |
| 177 | static int nl8048_probe(struct spi_device *spi) |
| 178 | { |
| 179 | struct nl8048_panel *lcd; |
| 180 | int ret; |
| 181 | |
| 182 | lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); |
| 183 | if (!lcd) |
| 184 | return -ENOMEM; |
| 185 | |
| 186 | spi_set_drvdata(spi, lcd); |
| 187 | lcd->spi = spi; |
| 188 | |
| 189 | lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); |
| 190 | if (IS_ERR(lcd->reset_gpio)) { |
| 191 | dev_err(&spi->dev, "failed to parse reset gpio\n"); |
| 192 | return PTR_ERR(lcd->reset_gpio); |
| 193 | } |
| 194 | |
| 195 | spi->mode = SPI_MODE_0; |
| 196 | spi->bits_per_word = 32; |
| 197 | |
| 198 | ret = spi_setup(spi); |
| 199 | if (ret < 0) { |
| 200 | dev_err(&spi->dev, "failed to setup SPI: %d\n", ret); |
| 201 | return ret; |
| 202 | } |
| 203 | |
| 204 | ret = nl8048_init(lcd); |
| 205 | if (ret < 0) |
| 206 | return ret; |
| 207 | |
| 208 | drm_panel_init(&lcd->panel); |
| 209 | lcd->panel.dev = &lcd->spi->dev; |
| 210 | lcd->panel.funcs = &nl8048_funcs; |
| 211 | |
| 212 | return drm_panel_add(&lcd->panel); |
| 213 | } |
| 214 | |
| 215 | static int nl8048_remove(struct spi_device *spi) |
| 216 | { |
| 217 | struct nl8048_panel *lcd = spi_get_drvdata(spi); |
| 218 | |
| 219 | drm_panel_remove(&lcd->panel); |
| 220 | drm_panel_disable(&lcd->panel); |
| 221 | drm_panel_unprepare(&lcd->panel); |
| 222 | |
| 223 | return 0; |
| 224 | } |
| 225 | |
| 226 | static const struct of_device_id nl8048_of_match[] = { |
| 227 | { .compatible = "nec,nl8048hl11", }, |
| 228 | { /* sentinel */ }, |
| 229 | }; |
| 230 | |
| 231 | MODULE_DEVICE_TABLE(of, nl8048_of_match); |
| 232 | |
| 233 | static const struct spi_device_id nl8048_ids[] = { |
| 234 | { "nl8048hl11", 0 }, |
| 235 | { /* sentinel */ } |
| 236 | }; |
| 237 | |
| 238 | MODULE_DEVICE_TABLE(spi, nl8048_ids); |
| 239 | |
| 240 | static struct spi_driver nl8048_driver = { |
| 241 | .probe = nl8048_probe, |
| 242 | .remove = nl8048_remove, |
| 243 | .id_table = nl8048_ids, |
| 244 | .driver = { |
| 245 | .name = "panel-nec-nl8048hl11", |
| 246 | .pm = &nl8048_pm_ops, |
| 247 | .of_match_table = nl8048_of_match, |
| 248 | }, |
| 249 | }; |
| 250 | |
| 251 | module_spi_driver(nl8048_driver); |
| 252 | |
| 253 | MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); |
| 254 | MODULE_DESCRIPTION("NEC-NL8048HL11 Driver"); |
| 255 | MODULE_LICENSE("GPL"); |