David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 2 | /* |
| 3 | * sata_uli.c - ULi Electronics SATA |
| 4 | * |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 5 | * libata documentation is available via 'make {ps|pdf}docs', |
| 6 | * as Documentation/driver-api/libata.rst |
| 7 | * |
| 8 | * Hardware documentation available under NDA. |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 9 | */ |
| 10 | |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/gfp.h> |
| 14 | #include <linux/pci.h> |
| 15 | #include <linux/blkdev.h> |
| 16 | #include <linux/delay.h> |
| 17 | #include <linux/interrupt.h> |
| 18 | #include <linux/device.h> |
| 19 | #include <scsi/scsi_host.h> |
| 20 | #include <linux/libata.h> |
| 21 | |
| 22 | #define DRV_NAME "sata_uli" |
| 23 | #define DRV_VERSION "1.3" |
| 24 | |
| 25 | enum { |
| 26 | uli_5289 = 0, |
| 27 | uli_5287 = 1, |
| 28 | uli_5281 = 2, |
| 29 | |
| 30 | uli_max_ports = 4, |
| 31 | |
| 32 | /* PCI configuration registers */ |
| 33 | ULI5287_BASE = 0x90, /* sata0 phy SCR registers */ |
| 34 | ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */ |
| 35 | ULI5281_BASE = 0x60, /* sata0 phy SCR registers */ |
| 36 | ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */ |
| 37 | }; |
| 38 | |
| 39 | struct uli_priv { |
| 40 | unsigned int scr_cfg_addr[uli_max_ports]; |
| 41 | }; |
| 42 | |
| 43 | static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); |
| 44 | static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); |
| 45 | static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); |
| 46 | |
| 47 | static const struct pci_device_id uli_pci_tbl[] = { |
| 48 | { PCI_VDEVICE(AL, 0x5289), uli_5289 }, |
| 49 | { PCI_VDEVICE(AL, 0x5287), uli_5287 }, |
| 50 | { PCI_VDEVICE(AL, 0x5281), uli_5281 }, |
| 51 | |
| 52 | { } /* terminate list */ |
| 53 | }; |
| 54 | |
| 55 | static struct pci_driver uli_pci_driver = { |
| 56 | .name = DRV_NAME, |
| 57 | .id_table = uli_pci_tbl, |
| 58 | .probe = uli_init_one, |
| 59 | .remove = ata_pci_remove_one, |
| 60 | }; |
| 61 | |
| 62 | static struct scsi_host_template uli_sht = { |
| 63 | ATA_BMDMA_SHT(DRV_NAME), |
| 64 | }; |
| 65 | |
| 66 | static struct ata_port_operations uli_ops = { |
| 67 | .inherits = &ata_bmdma_port_ops, |
| 68 | .scr_read = uli_scr_read, |
| 69 | .scr_write = uli_scr_write, |
| 70 | .hardreset = ATA_OP_NULL, |
| 71 | }; |
| 72 | |
| 73 | static const struct ata_port_info uli_port_info = { |
| 74 | .flags = ATA_FLAG_SATA | ATA_FLAG_IGN_SIMPLEX, |
| 75 | .pio_mask = ATA_PIO4, |
| 76 | .udma_mask = ATA_UDMA6, |
| 77 | .port_ops = &uli_ops, |
| 78 | }; |
| 79 | |
| 80 | |
| 81 | MODULE_AUTHOR("Peer Chen"); |
| 82 | MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); |
| 83 | MODULE_LICENSE("GPL"); |
| 84 | MODULE_DEVICE_TABLE(pci, uli_pci_tbl); |
| 85 | MODULE_VERSION(DRV_VERSION); |
| 86 | |
| 87 | static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) |
| 88 | { |
| 89 | struct uli_priv *hpriv = ap->host->private_data; |
| 90 | return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); |
| 91 | } |
| 92 | |
| 93 | static u32 uli_scr_cfg_read(struct ata_link *link, unsigned int sc_reg) |
| 94 | { |
| 95 | struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); |
| 96 | unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg); |
| 97 | u32 val; |
| 98 | |
| 99 | pci_read_config_dword(pdev, cfg_addr, &val); |
| 100 | return val; |
| 101 | } |
| 102 | |
| 103 | static void uli_scr_cfg_write(struct ata_link *link, unsigned int scr, u32 val) |
| 104 | { |
| 105 | struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); |
| 106 | unsigned int cfg_addr = get_scr_cfg_addr(link->ap, scr); |
| 107 | |
| 108 | pci_write_config_dword(pdev, cfg_addr, val); |
| 109 | } |
| 110 | |
| 111 | static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) |
| 112 | { |
| 113 | if (sc_reg > SCR_CONTROL) |
| 114 | return -EINVAL; |
| 115 | |
| 116 | *val = uli_scr_cfg_read(link, sc_reg); |
| 117 | return 0; |
| 118 | } |
| 119 | |
| 120 | static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) |
| 121 | { |
| 122 | if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 |
| 123 | return -EINVAL; |
| 124 | |
| 125 | uli_scr_cfg_write(link, sc_reg, val); |
| 126 | return 0; |
| 127 | } |
| 128 | |
| 129 | static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
| 130 | { |
| 131 | const struct ata_port_info *ppi[] = { &uli_port_info, NULL }; |
| 132 | unsigned int board_idx = (unsigned int) ent->driver_data; |
| 133 | struct ata_host *host; |
| 134 | struct uli_priv *hpriv; |
| 135 | void __iomem * const *iomap; |
| 136 | struct ata_ioports *ioaddr; |
| 137 | int n_ports, rc; |
| 138 | |
| 139 | ata_print_version_once(&pdev->dev, DRV_VERSION); |
| 140 | |
| 141 | rc = pcim_enable_device(pdev); |
| 142 | if (rc) |
| 143 | return rc; |
| 144 | |
| 145 | n_ports = 2; |
| 146 | if (board_idx == uli_5287) |
| 147 | n_ports = 4; |
| 148 | |
| 149 | /* allocate the host */ |
| 150 | host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); |
| 151 | if (!host) |
| 152 | return -ENOMEM; |
| 153 | |
| 154 | hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); |
| 155 | if (!hpriv) |
| 156 | return -ENOMEM; |
| 157 | host->private_data = hpriv; |
| 158 | |
| 159 | /* the first two ports are standard SFF */ |
| 160 | rc = ata_pci_sff_init_host(host); |
| 161 | if (rc) |
| 162 | return rc; |
| 163 | |
| 164 | ata_pci_bmdma_init(host); |
| 165 | |
| 166 | iomap = host->iomap; |
| 167 | |
| 168 | switch (board_idx) { |
| 169 | case uli_5287: |
| 170 | /* If there are four, the last two live right after |
| 171 | * the standard SFF ports. |
| 172 | */ |
| 173 | hpriv->scr_cfg_addr[0] = ULI5287_BASE; |
| 174 | hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; |
| 175 | |
| 176 | ioaddr = &host->ports[2]->ioaddr; |
| 177 | ioaddr->cmd_addr = iomap[0] + 8; |
| 178 | ioaddr->altstatus_addr = |
| 179 | ioaddr->ctl_addr = (void __iomem *) |
| 180 | ((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4; |
| 181 | ioaddr->bmdma_addr = iomap[4] + 16; |
| 182 | hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; |
| 183 | ata_sff_std_ports(ioaddr); |
| 184 | |
| 185 | ata_port_desc(host->ports[2], |
| 186 | "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", |
| 187 | (unsigned long long)pci_resource_start(pdev, 0) + 8, |
| 188 | ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4, |
| 189 | (unsigned long long)pci_resource_start(pdev, 4) + 16); |
| 190 | |
| 191 | ioaddr = &host->ports[3]->ioaddr; |
| 192 | ioaddr->cmd_addr = iomap[2] + 8; |
| 193 | ioaddr->altstatus_addr = |
| 194 | ioaddr->ctl_addr = (void __iomem *) |
| 195 | ((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4; |
| 196 | ioaddr->bmdma_addr = iomap[4] + 24; |
| 197 | hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; |
| 198 | ata_sff_std_ports(ioaddr); |
| 199 | |
| 200 | ata_port_desc(host->ports[2], |
| 201 | "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", |
| 202 | (unsigned long long)pci_resource_start(pdev, 2) + 9, |
| 203 | ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4, |
| 204 | (unsigned long long)pci_resource_start(pdev, 4) + 24); |
| 205 | |
| 206 | break; |
| 207 | |
| 208 | case uli_5289: |
| 209 | hpriv->scr_cfg_addr[0] = ULI5287_BASE; |
| 210 | hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; |
| 211 | break; |
| 212 | |
| 213 | case uli_5281: |
| 214 | hpriv->scr_cfg_addr[0] = ULI5281_BASE; |
| 215 | hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; |
| 216 | break; |
| 217 | |
| 218 | default: |
| 219 | BUG(); |
| 220 | break; |
| 221 | } |
| 222 | |
| 223 | pci_set_master(pdev); |
| 224 | pci_intx(pdev, 1); |
| 225 | return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, |
| 226 | IRQF_SHARED, &uli_sht); |
| 227 | } |
| 228 | |
| 229 | module_pci_driver(uli_pci_driver); |