Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 1 | /***********************license start*************** |
| 2 | * Author: Cavium Networks |
| 3 | * |
| 4 | * Contact: support@caviumnetworks.com |
| 5 | * This file is part of the OCTEON SDK |
| 6 | * |
| 7 | * Copyright (c) 2003-2008 Cavium Networks |
| 8 | * |
| 9 | * This file is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License, Version 2, as |
| 11 | * published by the Free Software Foundation. |
| 12 | * |
| 13 | * This file is distributed in the hope that it will be useful, but |
| 14 | * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| 15 | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| 16 | * NONINFRINGEMENT. See the GNU General Public License for more |
| 17 | * details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this file; if not, write to the Free Software |
| 21 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 22 | * or visit http://www.gnu.org/licenses/. |
| 23 | * |
| 24 | * This file may also be available under a different license from Cavium. |
| 25 | * Contact Cavium Networks for more information |
| 26 | ***********************license end**************************************/ |
| 27 | |
| 28 | /* |
| 29 | * Small helper utilities. |
| 30 | */ |
| 31 | #include <linux/kernel.h> |
| 32 | |
| 33 | #include <asm/octeon/octeon.h> |
| 34 | |
| 35 | #include <asm/octeon/cvmx-config.h> |
| 36 | |
| 37 | #include <asm/octeon/cvmx-fpa.h> |
| 38 | #include <asm/octeon/cvmx-pip.h> |
| 39 | #include <asm/octeon/cvmx-pko.h> |
| 40 | #include <asm/octeon/cvmx-ipd.h> |
| 41 | #include <asm/octeon/cvmx-spi.h> |
| 42 | |
| 43 | #include <asm/octeon/cvmx-helper.h> |
| 44 | #include <asm/octeon/cvmx-helper-util.h> |
| 45 | |
| 46 | #include <asm/octeon/cvmx-ipd-defs.h> |
| 47 | |
| 48 | /** |
| 49 | * Convert a interface mode into a human readable string |
| 50 | * |
| 51 | * @mode: Mode to convert |
| 52 | * |
| 53 | * Returns String |
| 54 | */ |
| 55 | const char *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t |
| 56 | mode) |
| 57 | { |
| 58 | switch (mode) { |
| 59 | case CVMX_HELPER_INTERFACE_MODE_DISABLED: |
| 60 | return "DISABLED"; |
| 61 | case CVMX_HELPER_INTERFACE_MODE_RGMII: |
| 62 | return "RGMII"; |
| 63 | case CVMX_HELPER_INTERFACE_MODE_GMII: |
| 64 | return "GMII"; |
| 65 | case CVMX_HELPER_INTERFACE_MODE_SPI: |
| 66 | return "SPI"; |
| 67 | case CVMX_HELPER_INTERFACE_MODE_PCIE: |
| 68 | return "PCIE"; |
| 69 | case CVMX_HELPER_INTERFACE_MODE_XAUI: |
| 70 | return "XAUI"; |
| 71 | case CVMX_HELPER_INTERFACE_MODE_SGMII: |
| 72 | return "SGMII"; |
| 73 | case CVMX_HELPER_INTERFACE_MODE_PICMG: |
| 74 | return "PICMG"; |
| 75 | case CVMX_HELPER_INTERFACE_MODE_NPI: |
| 76 | return "NPI"; |
| 77 | case CVMX_HELPER_INTERFACE_MODE_LOOP: |
| 78 | return "LOOP"; |
| 79 | } |
| 80 | return "UNKNOWN"; |
| 81 | } |
| 82 | |
| 83 | /** |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 84 | * Setup Random Early Drop on a specific input queue |
| 85 | * |
| 86 | * @queue: Input queue to setup RED on (0-7) |
| 87 | * @pass_thresh: |
| 88 | * Packets will begin slowly dropping when there are less than |
| 89 | * this many packet buffers free in FPA 0. |
| 90 | * @drop_thresh: |
| 91 | * All incoming packets will be dropped when there are less |
| 92 | * than this many free packet buffers in FPA 0. |
| 93 | * Returns Zero on success. Negative on failure |
| 94 | */ |
David Brazdil | 0f672f6 | 2019-12-10 10:32:29 +0000 | [diff] [blame^] | 95 | static int cvmx_helper_setup_red_queue(int queue, int pass_thresh, |
| 96 | int drop_thresh) |
Andrew Scull | b4b6d4a | 2019-01-02 15:54:55 +0000 | [diff] [blame] | 97 | { |
| 98 | union cvmx_ipd_qosx_red_marks red_marks; |
| 99 | union cvmx_ipd_red_quex_param red_param; |
| 100 | |
| 101 | /* Set RED to begin dropping packets when there are pass_thresh buffers |
| 102 | left. It will linearly drop more packets until reaching drop_thresh |
| 103 | buffers */ |
| 104 | red_marks.u64 = 0; |
| 105 | red_marks.s.drop = drop_thresh; |
| 106 | red_marks.s.pass = pass_thresh; |
| 107 | cvmx_write_csr(CVMX_IPD_QOSX_RED_MARKS(queue), red_marks.u64); |
| 108 | |
| 109 | /* Use the actual queue 0 counter, not the average */ |
| 110 | red_param.u64 = 0; |
| 111 | red_param.s.prb_con = |
| 112 | (255ul << 24) / (red_marks.s.pass - red_marks.s.drop); |
| 113 | red_param.s.avg_con = 1; |
| 114 | red_param.s.new_con = 255; |
| 115 | red_param.s.use_pcnt = 1; |
| 116 | cvmx_write_csr(CVMX_IPD_RED_QUEX_PARAM(queue), red_param.u64); |
| 117 | return 0; |
| 118 | } |
| 119 | |
| 120 | /** |
| 121 | * Setup Random Early Drop to automatically begin dropping packets. |
| 122 | * |
| 123 | * @pass_thresh: |
| 124 | * Packets will begin slowly dropping when there are less than |
| 125 | * this many packet buffers free in FPA 0. |
| 126 | * @drop_thresh: |
| 127 | * All incoming packets will be dropped when there are less |
| 128 | * than this many free packet buffers in FPA 0. |
| 129 | * Returns Zero on success. Negative on failure |
| 130 | */ |
| 131 | int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) |
| 132 | { |
| 133 | union cvmx_ipd_portx_bp_page_cnt page_cnt; |
| 134 | union cvmx_ipd_bp_prt_red_end ipd_bp_prt_red_end; |
| 135 | union cvmx_ipd_red_port_enable red_port_enable; |
| 136 | int queue; |
| 137 | int interface; |
| 138 | int port; |
| 139 | |
| 140 | /* Disable backpressure based on queued buffers. It needs SW support */ |
| 141 | page_cnt.u64 = 0; |
| 142 | page_cnt.s.bp_enb = 0; |
| 143 | page_cnt.s.page_cnt = 100; |
| 144 | for (interface = 0; interface < 2; interface++) { |
| 145 | for (port = cvmx_helper_get_first_ipd_port(interface); |
| 146 | port < cvmx_helper_get_last_ipd_port(interface); port++) |
| 147 | cvmx_write_csr(CVMX_IPD_PORTX_BP_PAGE_CNT(port), |
| 148 | page_cnt.u64); |
| 149 | } |
| 150 | |
| 151 | for (queue = 0; queue < 8; queue++) |
| 152 | cvmx_helper_setup_red_queue(queue, pass_thresh, drop_thresh); |
| 153 | |
| 154 | /* Shutoff the dropping based on the per port page count. SW isn't |
| 155 | decrementing it right now */ |
| 156 | ipd_bp_prt_red_end.u64 = 0; |
| 157 | ipd_bp_prt_red_end.s.prt_enb = 0; |
| 158 | cvmx_write_csr(CVMX_IPD_BP_PRT_RED_END, ipd_bp_prt_red_end.u64); |
| 159 | |
| 160 | red_port_enable.u64 = 0; |
| 161 | red_port_enable.s.prt_enb = 0xfffffffffull; |
| 162 | red_port_enable.s.avg_dly = 10000; |
| 163 | red_port_enable.s.prb_dly = 10000; |
| 164 | cvmx_write_csr(CVMX_IPD_RED_PORT_ENABLE, red_port_enable.u64); |
| 165 | |
| 166 | return 0; |
| 167 | } |
| 168 | EXPORT_SYMBOL_GPL(cvmx_helper_setup_red); |
| 169 | |
| 170 | /** |
| 171 | * Setup the common GMX settings that determine the number of |
| 172 | * ports. These setting apply to almost all configurations of all |
| 173 | * chips. |
| 174 | * |
| 175 | * @interface: Interface to configure |
| 176 | * @num_ports: Number of ports on the interface |
| 177 | * |
| 178 | * Returns Zero on success, negative on failure |
| 179 | */ |
| 180 | int __cvmx_helper_setup_gmx(int interface, int num_ports) |
| 181 | { |
| 182 | union cvmx_gmxx_tx_prts gmx_tx_prts; |
| 183 | union cvmx_gmxx_rx_prts gmx_rx_prts; |
| 184 | union cvmx_pko_reg_gmx_port_mode pko_mode; |
| 185 | union cvmx_gmxx_txx_thresh gmx_tx_thresh; |
| 186 | int index; |
| 187 | |
| 188 | /* Tell GMX the number of TX ports on this interface */ |
| 189 | gmx_tx_prts.u64 = cvmx_read_csr(CVMX_GMXX_TX_PRTS(interface)); |
| 190 | gmx_tx_prts.s.prts = num_ports; |
| 191 | cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), gmx_tx_prts.u64); |
| 192 | |
| 193 | /* Tell GMX the number of RX ports on this interface. This only |
| 194 | ** applies to *GMII and XAUI ports */ |
| 195 | if (cvmx_helper_interface_get_mode(interface) == |
| 196 | CVMX_HELPER_INTERFACE_MODE_RGMII |
| 197 | || cvmx_helper_interface_get_mode(interface) == |
| 198 | CVMX_HELPER_INTERFACE_MODE_SGMII |
| 199 | || cvmx_helper_interface_get_mode(interface) == |
| 200 | CVMX_HELPER_INTERFACE_MODE_GMII |
| 201 | || cvmx_helper_interface_get_mode(interface) == |
| 202 | CVMX_HELPER_INTERFACE_MODE_XAUI) { |
| 203 | if (num_ports > 4) { |
| 204 | cvmx_dprintf("__cvmx_helper_setup_gmx: Illegal " |
| 205 | "num_ports\n"); |
| 206 | return -1; |
| 207 | } |
| 208 | |
| 209 | gmx_rx_prts.u64 = cvmx_read_csr(CVMX_GMXX_RX_PRTS(interface)); |
| 210 | gmx_rx_prts.s.prts = num_ports; |
| 211 | cvmx_write_csr(CVMX_GMXX_RX_PRTS(interface), gmx_rx_prts.u64); |
| 212 | } |
| 213 | |
| 214 | /* Skip setting CVMX_PKO_REG_GMX_PORT_MODE on 30XX, 31XX, and 50XX */ |
| 215 | if (!OCTEON_IS_MODEL(OCTEON_CN30XX) && !OCTEON_IS_MODEL(OCTEON_CN31XX) |
| 216 | && !OCTEON_IS_MODEL(OCTEON_CN50XX)) { |
| 217 | /* Tell PKO the number of ports on this interface */ |
| 218 | pko_mode.u64 = cvmx_read_csr(CVMX_PKO_REG_GMX_PORT_MODE); |
| 219 | if (interface == 0) { |
| 220 | if (num_ports == 1) |
| 221 | pko_mode.s.mode0 = 4; |
| 222 | else if (num_ports == 2) |
| 223 | pko_mode.s.mode0 = 3; |
| 224 | else if (num_ports <= 4) |
| 225 | pko_mode.s.mode0 = 2; |
| 226 | else if (num_ports <= 8) |
| 227 | pko_mode.s.mode0 = 1; |
| 228 | else |
| 229 | pko_mode.s.mode0 = 0; |
| 230 | } else { |
| 231 | if (num_ports == 1) |
| 232 | pko_mode.s.mode1 = 4; |
| 233 | else if (num_ports == 2) |
| 234 | pko_mode.s.mode1 = 3; |
| 235 | else if (num_ports <= 4) |
| 236 | pko_mode.s.mode1 = 2; |
| 237 | else if (num_ports <= 8) |
| 238 | pko_mode.s.mode1 = 1; |
| 239 | else |
| 240 | pko_mode.s.mode1 = 0; |
| 241 | } |
| 242 | cvmx_write_csr(CVMX_PKO_REG_GMX_PORT_MODE, pko_mode.u64); |
| 243 | } |
| 244 | |
| 245 | /* |
| 246 | * Set GMX to buffer as much data as possible before starting |
| 247 | * transmit. This reduces the chances that we have a TX under |
| 248 | * run due to memory contention. Any packet that fits entirely |
| 249 | * in the GMX FIFO can never have an under run regardless of |
| 250 | * memory load. |
| 251 | */ |
| 252 | gmx_tx_thresh.u64 = cvmx_read_csr(CVMX_GMXX_TXX_THRESH(0, interface)); |
| 253 | if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN31XX) |
| 254 | || OCTEON_IS_MODEL(OCTEON_CN50XX)) { |
| 255 | /* These chips have a fixed max threshold of 0x40 */ |
| 256 | gmx_tx_thresh.s.cnt = 0x40; |
| 257 | } else { |
| 258 | /* Choose the max value for the number of ports */ |
| 259 | if (num_ports <= 1) |
| 260 | gmx_tx_thresh.s.cnt = 0x100 / 1; |
| 261 | else if (num_ports == 2) |
| 262 | gmx_tx_thresh.s.cnt = 0x100 / 2; |
| 263 | else |
| 264 | gmx_tx_thresh.s.cnt = 0x100 / 4; |
| 265 | } |
| 266 | /* |
| 267 | * SPI and XAUI can have lots of ports but the GMX hardware |
| 268 | * only ever has a max of 4. |
| 269 | */ |
| 270 | if (num_ports > 4) |
| 271 | num_ports = 4; |
| 272 | for (index = 0; index < num_ports; index++) |
| 273 | cvmx_write_csr(CVMX_GMXX_TXX_THRESH(index, interface), |
| 274 | gmx_tx_thresh.u64); |
| 275 | |
| 276 | return 0; |
| 277 | } |
| 278 | |
| 279 | /** |
| 280 | * Returns the IPD/PKO port number for a port on the given |
| 281 | * interface. |
| 282 | * |
| 283 | * @interface: Interface to use |
| 284 | * @port: Port on the interface |
| 285 | * |
| 286 | * Returns IPD/PKO port number |
| 287 | */ |
| 288 | int cvmx_helper_get_ipd_port(int interface, int port) |
| 289 | { |
| 290 | switch (interface) { |
| 291 | case 0: |
| 292 | return port; |
| 293 | case 1: |
| 294 | return port + 16; |
| 295 | case 2: |
| 296 | return port + 32; |
| 297 | case 3: |
| 298 | return port + 36; |
| 299 | case 4: |
| 300 | return port + 40; |
| 301 | case 5: |
| 302 | return port + 44; |
| 303 | } |
| 304 | return -1; |
| 305 | } |
| 306 | EXPORT_SYMBOL_GPL(cvmx_helper_get_ipd_port); |
| 307 | |
| 308 | /** |
| 309 | * Returns the interface number for an IPD/PKO port number. |
| 310 | * |
| 311 | * @ipd_port: IPD/PKO port number |
| 312 | * |
| 313 | * Returns Interface number |
| 314 | */ |
| 315 | int cvmx_helper_get_interface_num(int ipd_port) |
| 316 | { |
| 317 | if (ipd_port < 16) |
| 318 | return 0; |
| 319 | else if (ipd_port < 32) |
| 320 | return 1; |
| 321 | else if (ipd_port < 36) |
| 322 | return 2; |
| 323 | else if (ipd_port < 40) |
| 324 | return 3; |
| 325 | else if (ipd_port < 44) |
| 326 | return 4; |
| 327 | else if (ipd_port < 48) |
| 328 | return 5; |
| 329 | else |
| 330 | cvmx_dprintf("cvmx_helper_get_interface_num: Illegal IPD " |
| 331 | "port number\n"); |
| 332 | |
| 333 | return -1; |
| 334 | } |
| 335 | EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_num); |
| 336 | |
| 337 | /** |
| 338 | * Returns the interface index number for an IPD/PKO port |
| 339 | * number. |
| 340 | * |
| 341 | * @ipd_port: IPD/PKO port number |
| 342 | * |
| 343 | * Returns Interface index number |
| 344 | */ |
| 345 | int cvmx_helper_get_interface_index_num(int ipd_port) |
| 346 | { |
| 347 | if (ipd_port < 32) |
| 348 | return ipd_port & 15; |
| 349 | else if (ipd_port < 36) |
| 350 | return ipd_port & 3; |
| 351 | else if (ipd_port < 40) |
| 352 | return ipd_port & 3; |
| 353 | else if (ipd_port < 44) |
| 354 | return ipd_port & 3; |
| 355 | else if (ipd_port < 48) |
| 356 | return ipd_port & 3; |
| 357 | else |
| 358 | cvmx_dprintf("cvmx_helper_get_interface_index_num: " |
| 359 | "Illegal IPD port number\n"); |
| 360 | |
| 361 | return -1; |
| 362 | } |
| 363 | EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_index_num); |