Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index fb6bbd2..7044355 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -13,7 +13,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/usb_phy_generic.h>
@@ -25,10 +25,6 @@
#include "musb_core.h"
-#ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV 160
-#endif
-
#include "davinci.h"
#include "cppi_dma.h"
@@ -40,6 +36,9 @@
struct device *dev;
struct platform_device *musb;
struct clk *clk;
+ bool vbus_state;
+ struct gpio_desc *vbus;
+ struct work_struct vbus_work;
};
/* REVISIT (PM) we should be able to keep the PHY in low power mode most
@@ -135,43 +134,44 @@
* when J10 is out, and TI documents it as handling OTG.
*/
-#ifdef CONFIG_MACH_DAVINCI_EVM
-
-static int vbus_state = -1;
-
/* I2C operations are always synchronous, and require a task context.
* With unloaded systems, using the shared workqueue seems to suffice
* to satisfy the 100msec A_WAIT_VRISE timeout...
*/
-static void evm_deferred_drvvbus(struct work_struct *ignored)
+static void evm_deferred_drvvbus(struct work_struct *work)
{
- gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
- vbus_state = !vbus_state;
+ struct davinci_glue *glue = container_of(work, struct davinci_glue,
+ vbus_work);
+
+ gpiod_set_value_cansleep(glue->vbus, glue->vbus_state);
+ glue->vbus_state = !glue->vbus_state;
}
-#endif /* EVM */
-
-static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate)
+static void davinci_musb_source_power(struct musb *musb, int is_on,
+ int immediate)
{
-#ifdef CONFIG_MACH_DAVINCI_EVM
+ struct davinci_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+ /* This GPIO handling is entirely optional */
+ if (!glue->vbus)
+ return;
+
if (is_on)
is_on = 1;
- if (vbus_state == is_on)
+ if (glue->vbus_state == is_on)
return;
- vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */
+ /* 0/1 vs "-1 == unknown/init" */
+ glue->vbus_state = !is_on;
if (machine_is_davinci_evm()) {
- static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
-
if (immediate)
- gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
+ gpiod_set_value_cansleep(glue->vbus, glue->vbus_state);
else
- schedule_work(&evm_vbus_work);
+ schedule_work(&glue->vbus_work);
}
if (immediate)
- vbus_state = is_on;
-#endif
+ glue->vbus_state = is_on;
}
static void davinci_musb_set_vbus(struct musb *musb, int is_on)
@@ -524,6 +524,15 @@
pdata->platform_ops = &davinci_ops;
+ glue->vbus = devm_gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW);
+ if (IS_ERR(glue->vbus)) {
+ ret = PTR_ERR(glue->vbus);
+ goto err0;
+ } else {
+ glue->vbus_state = -1;
+ INIT_WORK(&glue->vbus_work, evm_deferred_drvvbus);
+ }
+
usb_phy_generic_register();
platform_set_drvdata(pdev, glue);