Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig
index 7b03a3a..bd5a8fc 100644
--- a/drivers/net/can/rcar/Kconfig
+++ b/drivers/net/can/rcar/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
config CAN_RCAR
tristate "Renesas R-Car CAN controller"
depends on ARCH_RENESAS || ARM
diff --git a/drivers/net/can/rcar/Makefile b/drivers/net/can/rcar/Makefile
index 08de36a..c9185b0 100644
--- a/drivers/net/can/rcar/Makefile
+++ b/drivers/net/can/rcar/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the Renesas R-Car CAN & CAN FD controller drivers
#
diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 771a460..bf5adea 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/* Renesas R-Car CAN device driver
*
* Copyright (C) 2013 Cogent Embedded, Inc. <source@cogentembedded.com>
* Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
#include <linux/module.h>
@@ -19,11 +15,17 @@
#include <linux/can/led.h>
#include <linux/can/dev.h>
#include <linux/clk.h>
-#include <linux/can/platform/rcar_can.h>
#include <linux/of.h>
#define RCAR_CAN_DRV_NAME "rcar_can"
+/* Clock Select Register settings */
+enum CLKR {
+ CLKR_CLKP1 = 0, /* Peripheral clock (clkp1) */
+ CLKR_CLKP2 = 1, /* Peripheral clock (clkp2) */
+ CLKR_CLKEXT = 3, /* Externally input clock */
+};
+
#define RCAR_SUPPORTED_CLOCKS (BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \
BIT(CLKR_CLKEXT))
@@ -740,7 +742,6 @@
static int rcar_can_probe(struct platform_device *pdev)
{
- struct rcar_can_platform_data *pdata;
struct rcar_can_priv *priv;
struct net_device *ndev;
struct resource *mem;
@@ -749,21 +750,11 @@
int err = -ENODEV;
int irq;
- if (pdev->dev.of_node) {
- of_property_read_u32(pdev->dev.of_node,
- "renesas,can-clock-select", &clock_select);
- } else {
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "No platform data provided!\n");
- goto fail;
- }
- clock_select = pdata->clock_select;
- }
+ of_property_read_u32(pdev->dev.of_node, "renesas,can-clock-select",
+ &clock_select);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(&pdev->dev, "No IRQ resource\n");
err = irq;
goto fail;
}
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 602c19e..edaa1ca 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
/* Renesas R-Car CAN FD device driver
*
* Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
/* The R-Car CAN FD controller can operate in either one of the below two modes
@@ -1512,10 +1508,11 @@
/* All packets processed */
if (num_pkts < quota) {
- napi_complete_done(napi, num_pkts);
- /* Enable Rx FIFO interrupts */
- rcar_canfd_set_bit(priv->base, RCANFD_RFCC(ridx),
- RCANFD_RFCC_RFIE);
+ if (napi_complete_done(napi, num_pkts)) {
+ /* Enable Rx FIFO interrupts */
+ rcar_canfd_set_bit(priv->base, RCANFD_RFCC(ridx),
+ RCANFD_RFCC_RFIE);
+ }
}
return num_pkts;
}
@@ -1655,14 +1652,12 @@
ch_irq = platform_get_irq(pdev, 0);
if (ch_irq < 0) {
- dev_err(&pdev->dev, "no Channel IRQ resource\n");
err = ch_irq;
goto fail_dev;
}
g_irq = platform_get_irq(pdev, 1);
if (g_irq < 0) {
- dev_err(&pdev->dev, "no Global IRQ resource\n");
err = g_irq;
goto fail_dev;
}