Update Linux to v5.4.148

Sourced from [1]

[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz

Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 22e5d4e..ecff9b2 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -613,6 +613,14 @@
 	ctrl &= ~SCSCR_TIE;
 
 	serial_port_out(port, SCSCR, ctrl);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	if (to_sci_port(port)->chan_tx &&
+	    !dma_submit_error(to_sci_port(port)->cookie_tx)) {
+		dmaengine_terminate_async(to_sci_port(port)->chan_tx);
+		to_sci_port(port)->cookie_tx = -EINVAL;
+	}
+#endif
 }
 
 static void sci_start_rx(struct uart_port *port)
@@ -873,9 +881,16 @@
 				tty_insert_flip_char(tport, c, TTY_NORMAL);
 		} else {
 			for (i = 0; i < count; i++) {
-				char c = serial_port_in(port, SCxRDR);
+				char c;
 
-				status = serial_port_in(port, SCxSR);
+				if (port->type == PORT_SCIF ||
+				    port->type == PORT_HSCIF) {
+					status = serial_port_in(port, SCxSR);
+					c = serial_port_in(port, SCxRDR);
+				} else {
+					c = serial_port_in(port, SCxRDR);
+					status = serial_port_in(port, SCxSR);
+				}
 				if (uart_handle_sysrq_char(port, c)) {
 					count--; i--;
 					continue;
@@ -1019,10 +1034,10 @@
 {
 	unsigned int bits;
 
+	if (rx_trig >= port->fifosize)
+		rx_trig = port->fifosize - 1;
 	if (rx_trig < 1)
 		rx_trig = 1;
-	if (rx_trig >= port->fifosize)
-		rx_trig = port->fifosize;
 
 	/* HSCIF can be set to an arbitrary level. */
 	if (sci_getreg(port, HSRTRGR)->size) {
@@ -1748,6 +1763,10 @@
 
 	/* Handle BREAKs */
 	sci_handle_breaks(port);
+
+	/* drop invalid character received before break was detected */
+	serial_port_in(port, SCxRDR);
+
 	sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
 
 	return IRQ_HANDLED;
@@ -1827,7 +1846,8 @@
 		ret = sci_er_interrupt(irq, ptr);
 
 	/* Break Interrupt */
-	if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
+	if (s->irqs[SCIx_ERI_IRQ] != s->irqs[SCIx_BRI_IRQ] &&
+	    (ssr_status & SCxSR_BRK(port)) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
 	/* Overrun Interrupt */