Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 8330fd8..34d6ef7 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1032,6 +1032,7 @@
if (!serial_isroot()) {
if ((ss->baud_base != state->baud_base) ||
(ss->close_delay != port->close_delay) ||
+ (ss->closing_wait != port->closing_wait) ||
(ss->xmit_fifo_size != state->xmit_fifo_size) ||
((ss->flags & ~ASYNC_USR_MASK) !=
(port->flags & ~ASYNC_USR_MASK))) {
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 769e0a5..3c6dd06 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -136,6 +136,21 @@
return 1;
}
+static unsigned int local_ev_byte_channel_send(unsigned int handle,
+ unsigned int *count,
+ const char *p)
+{
+ char buffer[EV_BYTE_CHANNEL_MAX_BYTES];
+ unsigned int c = *count;
+
+ if (c < sizeof(buffer)) {
+ memcpy(buffer, p, c);
+ memset(&buffer[c], 0, sizeof(buffer) - c);
+ p = buffer;
+ }
+ return ev_byte_channel_send(handle, count, p);
+}
+
/*************************** EARLY CONSOLE DRIVER ***************************/
#ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC
@@ -154,7 +169,7 @@
do {
count = 1;
- ret = ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
+ ret = local_ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
&count, &data);
} while (ret == EV_EAGAIN);
}
@@ -221,7 +236,7 @@
while (count) {
len = min_t(unsigned int, count, EV_BYTE_CHANNEL_MAX_BYTES);
do {
- ret = ev_byte_channel_send(handle, &len, s);
+ ret = local_ev_byte_channel_send(handle, &len, s);
} while (ret == EV_EAGAIN);
count -= len;
s += len;
@@ -401,7 +416,7 @@
CIRC_CNT_TO_END(bc->head, bc->tail, BUF_SIZE),
EV_BYTE_CHANNEL_MAX_BYTES);
- ret = ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail);
+ ret = local_ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail);
/* 'len' is valid only if the return code is 0 or EV_EAGAIN */
if (!ret || (ret == EV_EAGAIN))
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 27284a2..cdcc64e 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -302,10 +302,6 @@
vtermnos[index] = vtermno;
cons_ops[index] = ops;
- /* reserve all indices up to and including this index */
- if (last_hvc < index)
- last_hvc = index;
-
/* check if we need to re-register the kernel console */
hvc_check_console(index);
@@ -375,15 +371,14 @@
* tty fields and return the kref reference.
*/
if (rc) {
- tty_port_tty_set(&hp->port, NULL);
- tty->driver_data = NULL;
- tty_port_put(&hp->port);
printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
- } else
+ } else {
/* We are ready... raise DTR/RTS */
if (C_BAUD(tty))
if (hp->ops->dtr_rts)
hp->ops->dtr_rts(hp, 1);
+ tty_port_set_initialized(&hp->port, true);
+ }
/* Force wakeup of the polling thread */
hvc_kick();
@@ -393,22 +388,12 @@
static void hvc_close(struct tty_struct *tty, struct file * filp)
{
- struct hvc_struct *hp;
+ struct hvc_struct *hp = tty->driver_data;
unsigned long flags;
if (tty_hung_up_p(filp))
return;
- /*
- * No driver_data means that this close was issued after a failed
- * hvc_open by the tty layer's release_dev() function and we can just
- * exit cleanly because the kref reference wasn't made.
- */
- if (!tty->driver_data)
- return;
-
- hp = tty->driver_data;
-
spin_lock_irqsave(&hp->port.lock, flags);
if (--hp->port.count == 0) {
@@ -416,6 +401,9 @@
/* We are done with the tty pointer now. */
tty_port_tty_set(&hp->port, NULL);
+ if (!tty_port_initialized(&hp->port))
+ return;
+
if (C_HUPCL(tty))
if (hp->ops->dtr_rts)
hp->ops->dtr_rts(hp, 0);
@@ -432,6 +420,7 @@
* waking periodically to check chars_in_buffer().
*/
tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
+ tty_port_set_initialized(&hp->port, false);
} else {
if (hp->port.count < 0)
printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
@@ -960,13 +949,22 @@
cons_ops[i] == hp->ops)
break;
- /* no matching slot, just use a counter */
- if (i >= MAX_NR_HVC_CONSOLES)
- i = ++last_hvc;
+ if (i >= MAX_NR_HVC_CONSOLES) {
+
+ /* find 'empty' slot for console */
+ for (i = 0; i < MAX_NR_HVC_CONSOLES && vtermnos[i] != -1; i++) {
+ }
+
+ /* no matching slot, just use a counter */
+ if (i == MAX_NR_HVC_CONSOLES)
+ i = ++last_hvc + MAX_NR_HVC_CONSOLES;
+ }
hp->index = i;
- cons_ops[i] = ops;
- vtermnos[i] = vtermno;
+ if (i < MAX_NR_HVC_CONSOLES) {
+ cons_ops[i] = ops;
+ vtermnos[i] = vtermno;
+ }
list_add_tail(&(hp->next), &hvc_structs);
mutex_unlock(&hvc_structs_mutex);
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index ee0604c..0c498b2 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1218,13 +1218,6 @@
tty_wait_until_sent(tty, HVCS_CLOSE_WAIT);
- /*
- * This line is important because it tells hvcs_open that this
- * device needs to be re-configured the next time hvcs_open is
- * called.
- */
- tty->driver_data = NULL;
-
free_irq(irq, hvcsd);
return;
} else if (hvcsd->port.count < 0) {
@@ -1239,6 +1232,13 @@
{
struct hvcs_struct *hvcsd = tty->driver_data;
+ /*
+ * This line is important because it tells hvcs_open that this
+ * device needs to be re-configured the next time hvcs_open is
+ * called.
+ */
+ tty->driver_data = NULL;
+
tty_port_put(&hvcsd->port);
}
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 66f95f7..7322633 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1038,7 +1038,7 @@
static int __init hvsi_init(void)
{
- int i;
+ int i, ret;
hvsi_driver = alloc_tty_driver(hvsi_count);
if (!hvsi_driver)
@@ -1069,12 +1069,25 @@
}
hvsi_wait = wait_for_state; /* irqs active now */
- if (tty_register_driver(hvsi_driver))
- panic("Couldn't register hvsi console driver\n");
+ ret = tty_register_driver(hvsi_driver);
+ if (ret) {
+ pr_err("Couldn't register hvsi console driver\n");
+ goto err_free_irq;
+ }
printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
return 0;
+err_free_irq:
+ hvsi_wait = poll_for_state;
+ for (i = 0; i < hvsi_count; i++) {
+ struct hvsi_struct *hp = &hvsi_ports[i];
+
+ free_irq(hp->virq, hp);
+ }
+ tty_driver_kref_put(hvsi_driver);
+
+ return ret;
}
device_initcall(hvsi_init);
diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index cf20616..fe569f6 100644
--- a/drivers/tty/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
@@ -117,7 +117,7 @@
skb->len,
notify_packet_sent,
network);
- if (ret == -1) {
+ if (ret < 0) {
skb_pull(skb, 2);
return 0;
}
@@ -134,7 +134,7 @@
notify_packet_sent,
network);
kfree(buf);
- if (ret == -1)
+ if (ret < 0)
return 0;
}
kfree_skb(skb);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index fad3401..2358476 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -218,7 +218,7 @@
ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
buf, count,
ipw_write_packet_sent_callback, tty);
- if (ret == -1) {
+ if (ret < 0) {
mutex_unlock(&tty->ipw_tty_mutex);
return 0;
}
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 3a1a5e0..1254b39 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -2040,7 +2040,7 @@
ss->line = info->port.tty->index,
ss->flags = info->port.flags,
ss->baud_base = 921600,
- ss->close_delay = info->port.close_delay;
+ ss->close_delay = jiffies_to_msecs(info->port.close_delay) / 10;
mutex_unlock(&info->port.mutex);
return 0;
}
@@ -2050,6 +2050,7 @@
struct serial_struct *ss)
{
struct moxa_port *info = tty->driver_data;
+ unsigned int close_delay;
if (tty->index == MAX_PORTS)
return -EINVAL;
@@ -2061,19 +2062,24 @@
ss->baud_base != 921600)
return -EPERM;
+ close_delay = msecs_to_jiffies(ss->close_delay * 10);
+
mutex_lock(&info->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
- if (((ss->flags & ~ASYNC_USR_MASK) !=
+ if (close_delay != info->port.close_delay ||
+ ss->type != info->type ||
+ ((ss->flags & ~ASYNC_USR_MASK) !=
(info->port.flags & ~ASYNC_USR_MASK))) {
mutex_unlock(&info->port.mutex);
return -EPERM;
}
+ } else {
+ info->port.close_delay = close_delay;
+
+ MoxaSetFifo(info, ss->type == PORT_16550A);
+
+ info->type = ss->type;
}
- info->port.close_delay = ss->close_delay * HZ / 100;
-
- MoxaSetFifo(info, ss->type == PORT_16550A);
-
- info->type = ss->type;
mutex_unlock(&info->port.mutex);
return 0;
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 36a3eb4..38eb49b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -665,11 +665,10 @@
* FIXME: lock against link layer control transmissions
*/
-static void gsm_data_kick(struct gsm_mux *gsm)
+static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci)
{
struct gsm_msg *msg, *nmsg;
int len;
- int skip_sof = 0;
list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) {
if (gsm->constipated && msg->addr)
@@ -691,18 +690,23 @@
print_hex_dump_bytes("gsm_data_kick: ",
DUMP_PREFIX_OFFSET,
gsm->txframe, len);
-
- if (gsm->output(gsm, gsm->txframe + skip_sof,
- len - skip_sof) < 0)
+ if (gsm->output(gsm, gsm->txframe, len) < 0)
break;
/* FIXME: Can eliminate one SOF in many more cases */
gsm->tx_bytes -= msg->len;
- /* For a burst of frames skip the extra SOF within the
- burst */
- skip_sof = 1;
list_del(&msg->list);
kfree(msg);
+
+ if (dlci) {
+ tty_port_tty_wakeup(&dlci->port);
+ } else {
+ int i = 0;
+
+ for (i = 0; i < NUM_DLCI; i++)
+ if (gsm->dlci[i])
+ tty_port_tty_wakeup(&gsm->dlci[i]->port);
+ }
}
}
@@ -754,7 +758,7 @@
/* Add to the actual output queue */
list_add_tail(&msg->list, &gsm->tx_list);
gsm->tx_bytes += msg->len;
- gsm_data_kick(gsm);
+ gsm_data_kick(gsm, dlci);
}
/**
@@ -1215,7 +1219,7 @@
gsm_control_reply(gsm, CMD_FCON, NULL, 0);
/* Kick the link in case it is idling */
spin_lock_irqsave(&gsm->tx_lock, flags);
- gsm_data_kick(gsm);
+ gsm_data_kick(gsm, NULL);
spin_unlock_irqrestore(&gsm->tx_lock, flags);
break;
case CMD_FCOFF:
@@ -2373,8 +2377,18 @@
/* Don't register device 0 - this is the control channel and not
a usable tty interface */
base = mux_num_to_base(gsm); /* Base for this MUX */
- for (i = 1; i < NUM_DLCI; i++)
- tty_register_device(gsm_tty_driver, base + i, NULL);
+ for (i = 1; i < NUM_DLCI; i++) {
+ struct device *dev;
+
+ dev = tty_register_device(gsm_tty_driver,
+ base + i, NULL);
+ if (IS_ERR(dev)) {
+ for (i--; i >= 1; i--)
+ tty_unregister_device(gsm_tty_driver,
+ base + i);
+ return PTR_ERR(dev);
+ }
+ }
}
return ret;
}
@@ -2525,7 +2539,7 @@
/* Queue poll */
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
spin_lock_irqsave(&gsm->tx_lock, flags);
- gsm_data_kick(gsm);
+ gsm_data_kick(gsm, NULL);
if (gsm->tx_bytes < TX_THRESH_LO) {
gsm_dlci_data_sweep(gsm);
}
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index ed99948..af9b009 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1395,7 +1395,7 @@
NOZOMI_NAME, dc);
if (unlikely(ret)) {
dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq);
- goto err_free_kfifo;
+ goto err_free_all_kfifo;
}
DBG1("base_addr: %p", dc->base_addr);
@@ -1433,12 +1433,15 @@
return 0;
err_free_tty:
- for (i = 0; i < MAX_PORT; ++i) {
+ for (i--; i >= 0; i--) {
tty_unregister_device(ntty_driver, dc->index_start + i);
tty_port_destroy(&dc->port[i].port);
}
+ free_irq(pdev->irq, dc);
+err_free_all_kfifo:
+ i = MAX_PORT;
err_free_kfifo:
- for (i = 0; i < MAX_PORT; i++)
+ for (i--; i >= PORT_MDM; i--)
kfifo_free(&dc->port[i].fifo_ul);
err_free_sbuf:
kfree(dc->send_buf);
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 00099a8..c6a1d8c 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -120,10 +120,10 @@
spin_lock_irqsave(&to->port->lock, flags);
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to->port, buf, c);
+ spin_unlock_irqrestore(&to->port->lock, flags);
/* And shovel */
if (c)
tty_flip_buffer_push(to->port);
- spin_unlock_irqrestore(&to->port->lock, flags);
}
return c;
}
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 5ba6816..bbaad28 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -632,18 +632,21 @@
tty_port_init(&info->port);
info->port.ops = &rocket_port_ops;
info->flags &= ~ROCKET_MODE_MASK;
- switch (pc104[board][line]) {
- case 422:
- info->flags |= ROCKET_MODE_RS422;
- break;
- case 485:
- info->flags |= ROCKET_MODE_RS485;
- break;
- case 232:
- default:
+ if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1))
+ switch (pc104[board][line]) {
+ case 422:
+ info->flags |= ROCKET_MODE_RS422;
+ break;
+ case 485:
+ info->flags |= ROCKET_MODE_RS485;
+ break;
+ case 232:
+ default:
+ info->flags |= ROCKET_MODE_RS232;
+ break;
+ }
+ else
info->flags |= ROCKET_MODE_RS232;
- break;
- }
info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index a0ac16e..a971985 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -582,6 +582,12 @@
return AE_OK;
}
+static const struct acpi_device_id serdev_acpi_devices_blacklist[] = {
+ { "INT3511", 0 },
+ { "INT3512", 0 },
+ { },
+};
+
static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
void *data, void **return_value)
{
@@ -591,6 +597,10 @@
if (acpi_bus_get_device(handle, &adev))
return AE_OK;
+ /* Skip if black listed */
+ if (!acpi_match_device_ids(adev, serdev_acpi_devices_blacklist))
+ return AE_OK;
+
return acpi_serdev_register_device(ctrl, adev);
}
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index d1cdd2a..d367803 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -265,7 +265,6 @@
struct device *parent,
struct tty_driver *drv, int idx)
{
- const struct tty_port_client_operations *old_ops;
struct serdev_controller *ctrl;
struct serport *serport;
int ret;
@@ -284,7 +283,6 @@
ctrl->ops = &ctrl_ops;
- old_ops = port->client_ops;
port->client_ops = &client_ops;
port->client_data = ctrl;
@@ -297,7 +295,7 @@
err_reset_data:
port->client_data = NULL;
- port->client_ops = old_ops;
+ port->client_ops = &tty_port_default_client_ops;
serdev_controller_put(ctrl);
return ERR_PTR(ret);
@@ -312,8 +310,8 @@
return -ENODEV;
serdev_controller_remove(ctrl);
- port->client_ops = NULL;
port->client_data = NULL;
+ port->client_ops = &tty_port_default_client_ops;
serdev_controller_put(ctrl);
return 0;
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 0438d9a..6ba2efd 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -379,7 +379,6 @@
port.port.line = rc;
port.port.irq = irq_of_parse_and_map(np, 0);
- port.port.irqflags = IRQF_SHARED;
port.port.handle_irq = aspeed_vuart_handle_irq;
port.port.iotype = UPIO_MEM;
port.port.type = PORT_16550A;
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index 8ce700c..4997c51 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -113,7 +113,7 @@
{
struct bcm2835aux_data *data = platform_get_drvdata(pdev);
- serial8250_unregister_port(data->uart.port.line);
+ serial8250_unregister_port(data->line);
clk_disable_unprepare(data->clk);
return 0;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e682390..2675771 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -174,7 +174,7 @@
struct hlist_head *h;
struct hlist_node *n;
struct irq_info *i;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+ int ret;
mutex_lock(&hash_mutex);
@@ -209,9 +209,8 @@
INIT_LIST_HEAD(&up->list);
i->head = &up->list;
spin_unlock_irq(&i->lock);
- irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt,
- irq_flags, up->port.name, i);
+ up->port.irqflags, up->port.name, i);
if (ret < 0)
serial_do_unlink(i, up);
}
@@ -525,6 +524,7 @@
*/
up->mcr_mask = ~ALPHA_KLUDGE_MCR;
up->mcr_force = ALPHA_KLUDGE_MCR;
+ serial8250_set_defaults(up);
}
/* chain base port ops to support Remote Supervisor Adapter */
@@ -548,7 +548,6 @@
port->membase = old_serial_port[i].iomem_base;
port->iotype = old_serial_port[i].io_type;
port->regshift = old_serial_port[i].iomem_reg_shift;
- serial8250_set_defaults(up);
port->irqflags |= irqflag;
if (serial8250_isa_config != NULL)
@@ -1027,7 +1026,7 @@
gpios = mctrl_gpio_init(&uart->port, 0);
if (IS_ERR(gpios)) {
ret = PTR_ERR(gpios);
- goto out_unlock;
+ goto err;
} else {
uart->gpios = gpios;
}
@@ -1076,8 +1075,10 @@
serial8250_apply_quirks(uart);
ret = uart_add_one_port(&serial8250_reg,
&uart->port);
- if (ret == 0)
- ret = uart->port.line;
+ if (ret)
+ goto err;
+
+ ret = uart->port.line;
} else {
dev_info(uart->port.dev,
"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
@@ -1099,10 +1100,14 @@
}
}
-out_unlock:
mutex_unlock(&serial_mutex);
return ret;
+
+err:
+ uart->port.dev = NULL;
+ mutex_unlock(&serial_mutex);
+ return ret;
}
EXPORT_SYMBOL(serial8250_register_8250_port);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 1c72fdc..51a7d3b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -386,10 +386,10 @@
{
struct uart_8250_port uart = {}, *up = &uart;
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- int irq = platform_get_irq(pdev, 0);
struct uart_port *p = &up->port;
struct device *dev = &pdev->dev;
struct dw8250_data *data;
+ int irq;
int err;
u32 val;
@@ -398,11 +398,9 @@
return -EINVAL;
}
- if (irq < 0) {
- if (irq != -EPROBE_DEFER)
- dev_err(dev, "cannot get irq\n");
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
return irq;
- }
spin_lock_init(&p->lock);
p->mapbase = regs->start;
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 597eb9d..93367de 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -25,6 +25,14 @@
#include "8250.h"
+#define PCI_DEVICE_ID_ACCES_COM_2S 0x1052
+#define PCI_DEVICE_ID_ACCES_COM_4S 0x105d
+#define PCI_DEVICE_ID_ACCES_COM_8S 0x106c
+#define PCI_DEVICE_ID_ACCES_COM232_8 0x10a8
+#define PCI_DEVICE_ID_ACCES_COM_2SM 0x10d2
+#define PCI_DEVICE_ID_ACCES_COM_4SM 0x10db
+#define PCI_DEVICE_ID_ACCES_COM_8SM 0x10ea
+
#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002
#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004
#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a
@@ -299,7 +307,17 @@
* devices will export them as GPIOs, so we pre-configure them safely
* as inputs.
*/
- u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
+ u8 dir = 0x00;
+
+ if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) &&
+ (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) {
+ // Configure GPIO as inputs for Commtech adapters
+ dir = 0xff;
+ } else {
+ // Configure GPIO as outputs for SeaLevel adapters
+ dir = 0x00;
+ }
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
@@ -658,6 +676,22 @@
static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume);
+static const struct exar8250_board acces_com_2x = {
+ .num_ports = 2,
+ .setup = pci_xr17c154_setup,
+};
+
+static const struct exar8250_board acces_com_4x = {
+ .num_ports = 4,
+ .setup = pci_xr17c154_setup,
+};
+
+static const struct exar8250_board acces_com_8x = {
+ .num_ports = 8,
+ .setup = pci_xr17c154_setup,
+};
+
+
static const struct exar8250_board pbn_fastcom335_2 = {
.num_ports = 2,
.setup = pci_fastcom335_setup,
@@ -691,6 +725,24 @@
.exit = pci_xr17v35x_exit,
};
+static const struct exar8250_board pbn_fastcom35x_2 = {
+ .num_ports = 2,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_4 = {
+ .num_ports = 4,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_8 = {
+ .num_ports = 8,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
static const struct exar8250_board pbn_exar_XR17V4358 = {
.num_ports = 12,
.setup = pci_xr17v35x_setup,
@@ -726,6 +778,15 @@
}
static const struct pci_device_id exar_pci_tbl[] = {
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_2S, acces_com_2x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_4S, acces_com_4x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_8S, acces_com_8x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM232_8, acces_com_8x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_2SM, acces_com_2x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_4SM, acces_com_4x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_8SM, acces_com_8x),
+
+
CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect),
CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect),
@@ -752,9 +813,9 @@
EXAR_DEVICE(EXAR, EXAR_XR17V358, pbn_exar_XR17V35x),
EXAR_DEVICE(EXAR, EXAR_XR17V4358, pbn_exar_XR17V4358),
EXAR_DEVICE(EXAR, EXAR_XR17V8358, pbn_exar_XR17V8358),
- EXAR_DEVICE(COMMTECH, COMMTECH_4222PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, COMMTECH_4224PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, COMMTECH_4228PCIE, pbn_exar_XR17V35x),
+ EXAR_DEVICE(COMMTECH, COMMTECH_4222PCIE, pbn_fastcom35x_2),
+ EXAR_DEVICE(COMMTECH, COMMTECH_4224PCIE, pbn_fastcom35x_4),
+ EXAR_DEVICE(COMMTECH, COMMTECH_4228PCIE, pbn_fastcom35x_8),
EXAR_DEVICE(COMMTECH, COMMTECH_4222PCI335, pbn_fastcom335_2),
EXAR_DEVICE(COMMTECH, COMMTECH_4224PCI335, pbn_fastcom335_4),
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index b411ba4..98e68f2 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -92,10 +92,13 @@
struct dma_tx_state state;
int copied, total, cnt;
unsigned char *ptr;
+ unsigned long flags;
if (data->rx_status == DMA_RX_SHUTDOWN)
return;
+ spin_lock_irqsave(&up->port.lock, flags);
+
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
total = dma->rx_size - state.residue;
cnt = total;
@@ -119,6 +122,8 @@
tty_flip_buffer_push(tty_port);
mtk8250_rx_dma(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
}
static void mtk8250_rx_dma(struct uart_8250_port *up)
@@ -305,7 +310,20 @@
}
#endif
- serial8250_do_set_termios(port, termios, old);
+ /*
+ * Store the requested baud rate before calling the generic 8250
+ * set_termios method. Standard 8250 port expects bauds to be
+ * no higher than (uartclk / 16) so the baud will be clamped if it
+ * gets out of that bound. Mediatek 8250 port supports speed
+ * higher than that, therefore we'll get original baud rate back
+ * after calling the generic set_termios method and recalculate
+ * the speed later in this method.
+ */
+ baud = tty_termios_baud_rate(termios);
+
+ serial8250_do_set_termios(port, termios, NULL);
+
+ tty_termios_encode_baud_rate(termios, baud, baud);
/*
* Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS)
@@ -338,6 +356,11 @@
*/
spin_lock_irqsave(&port->lock, flags);
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
/* set DLAB we have cval saved in up->lcr from the call to the core */
serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
serial_dl_write(up, quot);
@@ -544,7 +567,7 @@
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- data->rx_wakeup_irq = platform_get_irq(pdev, 1);
+ data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 0826cfd..9ba3170 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -172,7 +172,6 @@
port->type = type;
port->uartclk = clk;
- port->irqflags |= IRQF_SHARED;
if (of_property_read_bool(np, "no-loopback-test"))
port->flags |= UPF_SKIP_TEST;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 836e736..efe793a 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -170,11 +170,6 @@
struct omap8250_priv *priv)
{
u8 timeout = 255;
- u8 old_mdr1;
-
- old_mdr1 = serial_in(up, UART_OMAP_MDR1);
- if (old_mdr1 == priv->mdr1)
- return;
serial_out(up, UART_OMAP_MDR1, priv->mdr1);
udelay(2);
@@ -790,7 +785,10 @@
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
count = dma->rx_size - state.residue;
-
+ if (count < dma->rx_size)
+ dmaengine_terminate_async(dma->rxchan);
+ if (!count)
+ goto unlock;
ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
p->port.icount.rx += ret;
@@ -852,7 +850,6 @@
spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
__dma_rx_do_complete(p);
- dmaengine_terminate_all(dma->rxchan);
}
static int omap_8250_rx_dma(struct uart_8250_port *p)
@@ -1234,6 +1231,7 @@
spin_lock_init(&priv->rx_dma_lock);
device_init_wakeup(&pdev->dev, true);
+ pm_runtime_enable(&pdev->dev);
pm_runtime_use_autosuspend(&pdev->dev);
/*
@@ -1247,7 +1245,6 @@
pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
pm_runtime_irq_safe(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6adbadd..a2bb103 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -58,6 +58,8 @@
int line[0];
};
+#define PCI_DEVICE_ID_HPE_PCI_SERIAL 0x37e
+
static const struct pci_device_id pci_use_msi[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x1000) },
@@ -65,6 +67,8 @@
0xA000, 0x1000) },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
0xA000, 0x1000) },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ PCI_ANY_ID, PCI_ANY_ID) },
{ }
};
@@ -85,7 +89,7 @@
static int
setup_port(struct serial_private *priv, struct uart_8250_port *port,
- int bar, int offset, int regshift)
+ u8 bar, unsigned int offset, int regshift)
{
struct pci_dev *dev = priv->dev;
@@ -745,16 +749,8 @@
}
/* UART Port Control Register */
-#define NI16550_PCR_OFFSET 0x0f
-#define NI16550_PCR_RS422 0x00
-#define NI16550_PCR_ECHO_RS485 0x01
-#define NI16550_PCR_DTR_RS485 0x02
-#define NI16550_PCR_AUTO_RS485 0x03
-#define NI16550_PCR_WIRE_MODE_MASK 0x03
-#define NI16550_PCR_TXVR_ENABLE_BIT BIT(3)
-#define NI16550_PCR_RS485_TERMINATION_BIT BIT(6)
-#define NI16550_ACR_DTR_AUTO_DTR (0x2 << 3)
-#define NI16550_ACR_DTR_MANUAL_DTR (0x0 << 3)
+#define NI8430_PORTCON 0x0f
+#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
static int
pci_ni8430_setup(struct serial_private *priv,
@@ -776,117 +772,14 @@
return -ENOMEM;
/* enable the transceiver */
- writeb(readb(p + offset + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
- p + offset + NI16550_PCR_OFFSET);
+ writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
+ p + offset + NI8430_PORTCON);
iounmap(p);
return setup_port(priv, port, bar, offset, board->reg_shift);
}
-static int pci_ni8431_config_rs485(struct uart_port *port,
- struct serial_rs485 *rs485)
-{
- u8 pcr, acr;
- struct uart_8250_port *up;
-
- up = container_of(port, struct uart_8250_port, port);
- acr = up->acr;
- pcr = port->serial_in(port, NI16550_PCR_OFFSET);
- pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
-
- if (rs485->flags & SER_RS485_ENABLED) {
- /* RS-485 */
- if ((rs485->flags & SER_RS485_RX_DURING_TX) &&
- (rs485->flags & SER_RS485_RTS_ON_SEND)) {
- dev_dbg(port->dev, "Invalid 2-wire mode\n");
- return -EINVAL;
- }
-
- if (rs485->flags & SER_RS485_RX_DURING_TX) {
- /* Echo */
- dev_vdbg(port->dev, "2-wire DTR with echo\n");
- pcr |= NI16550_PCR_ECHO_RS485;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- } else {
- /* Auto or DTR */
- if (rs485->flags & SER_RS485_RTS_ON_SEND) {
- /* Auto */
- dev_vdbg(port->dev, "2-wire Auto\n");
- pcr |= NI16550_PCR_AUTO_RS485;
- acr |= NI16550_ACR_DTR_AUTO_DTR;
- } else {
- /* DTR-controlled */
- /* No Echo */
- dev_vdbg(port->dev, "2-wire DTR no echo\n");
- pcr |= NI16550_PCR_DTR_RS485;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- }
- }
- } else {
- /* RS-422 */
- dev_vdbg(port->dev, "4-wire\n");
- pcr |= NI16550_PCR_RS422;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- }
-
- dev_dbg(port->dev, "write pcr: 0x%08x\n", pcr);
- port->serial_out(port, NI16550_PCR_OFFSET, pcr);
-
- up->acr = acr;
- port->serial_out(port, UART_SCR, UART_ACR);
- port->serial_out(port, UART_ICR, up->acr);
-
- /* Update the cache. */
- port->rs485 = *rs485;
-
- return 0;
-}
-
-static int pci_ni8431_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *uart, int idx)
-{
- u8 pcr, acr;
- struct pci_dev *dev = priv->dev;
- void __iomem *addr;
- unsigned int bar, offset = board->first_offset;
-
- if (idx >= board->num_ports)
- return 1;
-
- bar = FL_GET_BASE(board->flags);
- offset += idx * board->uart_offset;
-
- addr = pci_ioremap_bar(dev, bar);
- if (!addr)
- return -ENOMEM;
-
- /* enable the transceiver */
- writeb(readb(addr + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
- addr + NI16550_PCR_OFFSET);
-
- pcr = readb(addr + NI16550_PCR_OFFSET);
- pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
-
- /* set wire mode to default RS-422 */
- pcr |= NI16550_PCR_RS422;
- acr = NI16550_ACR_DTR_MANUAL_DTR;
-
- /* write port configuration to register */
- writeb(pcr, addr + NI16550_PCR_OFFSET);
-
- /* access and write to UART acr register */
- writeb(UART_ACR, addr + UART_SCR);
- writeb(acr, addr + UART_ICR);
-
- uart->port.rs485_config = &pci_ni8431_config_rs485;
-
- iounmap(addr);
-
- return setup_port(priv, uart, bar, offset, board->reg_shift);
-}
-
static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -1982,12 +1875,6 @@
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253
-#define PCI_VENDOR_ID_PERICOM 0x12D8
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958
-
#define PCI_VENDOR_ID_ACCESIO 0x494f
#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051
#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053
@@ -2023,15 +1910,6 @@
#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9
#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8
-#define PCIE_DEVICE_ID_NI_PXIE8430_2328 0x74C2
-#define PCIE_DEVICE_ID_NI_PXIE8430_23216 0x74C1
-#define PCI_DEVICE_ID_NI_PXI8431_4852 0x7081
-#define PCI_DEVICE_ID_NI_PXI8431_4854 0x70DE
-#define PCI_DEVICE_ID_NI_PXI8431_4858 0x70E3
-#define PCI_DEVICE_ID_NI_PXI8433_4852 0x70E9
-#define PCI_DEVICE_ID_NI_PXI8433_4854 0x70ED
-#define PCIE_DEVICE_ID_NI_PXIE8431_4858 0x74C4
-#define PCIE_DEVICE_ID_NI_PXIE8431_48516 0x74C3
#define PCI_DEVICE_ID_MOXA_CP102E 0x1024
#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025
@@ -2092,6 +1970,16 @@
.setup = pci_hp_diva_setup,
},
/*
+ * HPE PCI serial device
+ */
+ {
+ .vendor = PCI_VENDOR_ID_HP_3PAR,
+ .device = PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_hp_diva_setup,
+ },
+ /*
* Intel
*/
{
@@ -2269,87 +2157,6 @@
.setup = pci_ni8430_setup,
.exit = pci_ni8430_exit,
},
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8430_2328,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8430_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8430_23216,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8430_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4852,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4854,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4858,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8433_4852,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8433_4854,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8431_4858,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8431_48516,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
/* Quatech */
{
.vendor = PCI_VENDOR_ID_QUATECH,
@@ -3106,13 +2913,6 @@
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
- pbn_ni8430_pxie_8,
- pbn_ni8430_pxie_16,
- pbn_ni8431_2,
- pbn_ni8431_4,
- pbn_ni8431_8,
- pbn_ni8431_pxie_8,
- pbn_ni8431_pxie_16,
pbn_ADDIDATA_PCIe_1_3906250,
pbn_ADDIDATA_PCIe_2_3906250,
pbn_ADDIDATA_PCIe_4_3906250,
@@ -3765,55 +3565,6 @@
.uart_offset = 0x10,
.first_offset = 0x800,
},
- [pbn_ni8430_pxie_16] = {
- .flags = FL_BASE0,
- .num_ports = 16,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8430_pxie_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_4] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_2] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_pxie_16] = {
- .flags = FL_BASE0,
- .num_ports = 16,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_pxie_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
/*
* ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
*/
@@ -4012,6 +3763,12 @@
{ PCI_VDEVICE(INTEL, 0x0f0c), },
{ PCI_VDEVICE(INTEL, 0x228a), },
{ PCI_VDEVICE(INTEL, 0x228c), },
+ { PCI_VDEVICE(INTEL, 0x4b96), },
+ { PCI_VDEVICE(INTEL, 0x4b97), },
+ { PCI_VDEVICE(INTEL, 0x4b98), },
+ { PCI_VDEVICE(INTEL, 0x4b99), },
+ { PCI_VDEVICE(INTEL, 0x4b9a), },
+ { PCI_VDEVICE(INTEL, 0x4b9b), },
{ PCI_VDEVICE(INTEL, 0x9ce3), },
{ PCI_VDEVICE(INTEL, 0x9ce4), },
@@ -4166,21 +3923,27 @@
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.uartclk = board->base_baud * 16;
- if (pci_match_id(pci_use_msi, dev)) {
- dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
- pci_set_master(dev);
- rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (board->flags & FL_NOIRQ) {
+ uart.port.irq = 0;
} else {
- dev_dbg(&dev->dev, "Using legacy interrupts\n");
- rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
- }
- if (rc < 0) {
- kfree(priv);
- priv = ERR_PTR(rc);
- goto err_deinit;
+ if (pci_match_id(pci_use_msi, dev)) {
+ dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
+ pci_set_master(dev);
+ uart.port.flags &= ~UPF_SHARE_IRQ;
+ rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+ } else {
+ dev_dbg(&dev->dev, "Using legacy interrupts\n");
+ rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
+ }
+ if (rc < 0) {
+ kfree(priv);
+ priv = ERR_PTR(rc);
+ goto err_deinit;
+ }
+
+ uart.port.irq = pci_irq_vector(dev, 0);
}
- uart.port.irq = pci_irq_vector(dev, 0);
uart.port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) {
@@ -5195,6 +4958,10 @@
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_115200 },
+ /* HPE PCI serial device */
+ { PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_115200 },
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -5567,33 +5334,6 @@
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_2328,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_pxie_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_23216,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_pxie_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4852,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4854,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_4 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4858,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_4858,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_pxie_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_48516,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_pxie_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4852,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4854,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_4 },
/*
* MOXA
@@ -5858,6 +5598,17 @@
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_wch384_4 },
+ /*
+ * Realtek RealManage
+ */
+ { PCI_VENDOR_ID_REALTEK, 0x816a,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_REALTEK, 0x816b,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_1_115200 },
+
/* Fintek PCI serial cards */
{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8407166..777ef1a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -125,7 +125,8 @@
.name = "16C950/954",
.fifo_size = 128,
.tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+ .rxtrig_bytes = {16, 32, 112, 120},
/* UART_CAP_EFR breaks billionon CF bluetooth card. */
.flags = UART_CAP_FIFO | UART_CAP_SLEEP,
},
@@ -314,7 +315,11 @@
/* Uart divisor latch read */
static int default_serial_dl_read(struct uart_8250_port *up)
{
- return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+ /* Assign these in pieces to truncate any bits above 7. */
+ unsigned char dll = serial_in(up, UART_DLL);
+ unsigned char dlm = serial_in(up, UART_DLM);
+
+ return dll | dlm << 8;
}
/* Uart divisor latch write */
@@ -1258,9 +1263,11 @@
serial_out(up, UART_LCR, 0);
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- scratch = serial_in(up, UART_IIR) >> 6;
- switch (scratch) {
+ /* Assign this as it is to truncate any bits above 7. */
+ scratch = serial_in(up, UART_IIR);
+
+ switch (scratch >> 6) {
case 0:
autoconfig_8250(up);
break;
@@ -1816,6 +1823,7 @@
unsigned char status;
unsigned long flags;
struct uart_8250_port *up = up_to_u8250p(port);
+ bool skip_rx = false;
if (iir & UART_IIR_NO_INT)
return 0;
@@ -1824,7 +1832,20 @@
status = serial_port_in(port, UART_LSR);
- if (status & (UART_LSR_DR | UART_LSR_BI)) {
+ /*
+ * If port is stopped and there are no error conditions in the
+ * FIFO, then don't drain the FIFO, as this may lead to TTY buffer
+ * overflow. Not servicing, RX FIFO would trigger auto HW flow
+ * control when FIFO occupancy reaches preset threshold, thus
+ * halting RX. This only works when auto HW flow control is
+ * available.
+ */
+ if (!(status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) &&
+ (port->status & (UPSTAT_AUTOCTS | UPSTAT_AUTORTS)) &&
+ !(port->read_status_mask & UART_LSR_DR))
+ skip_rx = true;
+
+ if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
if (!up->dma || handle_rx_dma(up, iir))
status = serial8250_rx_chars(up, status);
}
@@ -2192,8 +2213,16 @@
}
}
+ /* Check if we need to have shared IRQs */
+ if (port->irq && (up->port.flags & UPF_SHARE_IRQ))
+ up->port.irqflags |= IRQF_SHARED;
+
if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
unsigned char iir1;
+
+ if (port->irqflags & IRQF_SHARED)
+ disable_irq_nosync(port->irq);
+
/*
* Test for UARTs that do not reassert THRE when the
* transmitter is idle and the interrupt has already
@@ -2203,8 +2232,6 @@
* allow register changes to become visible.
*/
spin_lock_irqsave(&port->lock, flags);
- if (up->port.irqflags & IRQF_SHARED)
- disable_irq_nosync(port->irq);
wait_for_xmitr(up, UART_LSR_THRE);
serial_port_out_sync(port, UART_IER, UART_IER_THRI);
@@ -2216,9 +2243,10 @@
iir = serial_port_in(port, UART_IIR);
serial_port_out(port, UART_IER, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+
if (port->irqflags & IRQF_SHARED)
enable_irq(port->irq);
- spin_unlock_irqrestore(&port->lock, flags);
/*
* If the interrupt is not reasserted, or we otherwise
@@ -2535,15 +2563,30 @@
struct ktermios *termios,
struct ktermios *old)
{
+ unsigned int tolerance = port->uartclk / 100;
+ unsigned int min;
+ unsigned int max;
+
+ /*
+ * Handle magic divisors for baud rates above baud_base on SMSC
+ * Super I/O chips. Enable custom rates of clk/4 and clk/8, but
+ * disable divisor values beyond 32767, which are unavailable.
+ */
+ if (port->flags & UPF_MAGIC_MULTIPLIER) {
+ min = port->uartclk / 16 / UART_DIV_MAX >> 1;
+ max = (port->uartclk + tolerance) / 4;
+ } else {
+ min = port->uartclk / 16 / UART_DIV_MAX;
+ max = (port->uartclk + tolerance) / 16;
+ }
+
/*
* Ask the core to calculate the divisor for us.
* Allow 1% tolerance at the upper limit so uart clks marginally
* slower than nominal still match standard baud rates without
* causing transmission errors.
*/
- return uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / UART_DIV_MAX,
- port->uartclk);
+ return uart_get_baud_rate(port, termios, old, min, max);
}
void
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index c8186a0..a05c2b6 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -306,6 +306,7 @@
static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
+ int ret;
dev_dbg(&link->dev, "serial_attach()\n");
@@ -320,7 +321,15 @@
if (do_sound)
link->config_flags |= CONF_ENABLE_SPKR;
- return serial_config(link);
+ ret = serial_config(link);
+ if (ret)
+ goto free_info;
+
+ return 0;
+
+free_info:
+ kfree(info);
+ return ret;
}
static void serial_detach(struct pcmcia_device *link)
@@ -780,6 +789,7 @@
PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
+ PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa),
PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
@@ -807,7 +817,6 @@
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490),
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 67a9eb3..a9751a8 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -10,6 +10,7 @@
config SERIAL_EARLYCON
bool
+ depends on SERIAL_CORE
help
Support for early consoles with the earlycon parameter. This enables
the console before standard serial driver is probed. The console is
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3a7d1a6..16720c9 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -313,8 +313,9 @@
*/
static int pl011_fifo_to_tty(struct uart_amba_port *uap)
{
- u16 status;
unsigned int ch, flag, fifotaken;
+ int sysrq;
+ u16 status;
for (fifotaken = 0; fifotaken != 256; fifotaken++) {
status = pl011_read(uap, REG_FR);
@@ -349,10 +350,12 @@
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&uap->port, ch & 255))
- continue;
+ spin_unlock(&uap->port.lock);
+ sysrq = uart_handle_sysrq_char(&uap->port, ch & 255);
+ spin_lock(&uap->port.lock);
- uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
+ if (!sysrq)
+ uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
}
return fifotaken;
@@ -813,10 +816,8 @@
if (!uap->using_tx_dma)
return;
- /* Avoid deadlock with the DMA engine callback */
- spin_unlock(&uap->port.lock);
- dmaengine_terminate_all(uap->dmatx.chan);
- spin_lock(&uap->port.lock);
+ dmaengine_terminate_async(uap->dmatx.chan);
+
if (uap->dmatx.queued) {
dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
DMA_TO_DEVICE);
@@ -2254,9 +2255,8 @@
clk_disable(uap->clk);
}
-static void __init
-pl011_console_get_options(struct uart_amba_port *uap, int *baud,
- int *parity, int *bits)
+static void pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ int *parity, int *bits)
{
if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
@@ -2289,7 +2289,7 @@
}
}
-static int __init pl011_console_setup(struct console *co, char *options)
+static int pl011_console_setup(struct console *co, char *options)
{
struct uart_amba_port *uap;
int baud = 38400;
@@ -2357,8 +2357,8 @@
*
* Returns 0 if console matches; otherwise non-zero to use default matching
*/
-static int __init pl011_console_match(struct console *co, char *name, int idx,
- char *options)
+static int pl011_console_match(struct console *co, char *name, int idx,
+ char *options)
{
unsigned char iotype;
resource_size_t addr;
@@ -2587,6 +2587,7 @@
uap->port.fifosize = uap->fifosize;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = index;
+ spin_lock_init(&uap->port.lock);
amba_ports[index] = uap;
@@ -2595,7 +2596,7 @@
static int pl011_register_port(struct uart_amba_port *uap)
{
- int ret;
+ int ret, i;
/* Ensure interrupts from this UART are masked and cleared */
pl011_write(0, uap, REG_IMSC);
@@ -2606,6 +2607,9 @@
if (ret < 0) {
dev_err(uap->port.dev,
"Failed to register AMBA-PL011 driver\n");
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
return ret;
}
}
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 3bdd56a..ea12f10 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -286,6 +286,10 @@
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
AR933X_UART_CS_HOST_INT_EN);
+ /* enable RX and TX ready overide */
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
+
/* reenable the UART */
ar933x_uart_rmw(up, AR933X_UART_CS_REG,
AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
@@ -418,6 +422,10 @@
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
AR933X_UART_CS_HOST_INT_EN);
+ /* enable RX and TX ready overide */
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
+
/* Enable RX interrupts */
up->ier = AR933X_UART_INT_RX_VALID;
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a8dc8af..8a909d5 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -574,7 +574,8 @@
atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
if (atmel_uart_is_half_duplex(port))
- atmel_start_rx(port);
+ if (!atomic_read(&atmel_port->tasklet_shutdown))
+ atmel_start_rx(port);
}
@@ -2270,27 +2271,6 @@
mode |= ATMEL_US_USMODE_NORMAL;
}
- /* set the mode, clock divisor, parity, stop bits and data size */
- atmel_uart_writel(port, ATMEL_US_MR, mode);
-
- /*
- * when switching the mode, set the RTS line state according to the
- * new mode, otherwise keep the former state
- */
- if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
- unsigned int rts_state;
-
- if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
- /* let the hardware control the RTS line */
- rts_state = ATMEL_US_RTSDIS;
- } else {
- /* force RTS line to low level */
- rts_state = ATMEL_US_RTSEN;
- }
-
- atmel_uart_writel(port, ATMEL_US_CR, rts_state);
- }
-
/*
* Set the baud rate:
* Fractional baudrate allows to setup output frequency more
@@ -2317,6 +2297,28 @@
if (!(port->iso7816.flags & SER_ISO7816_ENABLED))
atmel_uart_writel(port, ATMEL_US_BRGR, quot);
+
+ /* set the mode, clock divisor, parity, stop bits and data size */
+ atmel_uart_writel(port, ATMEL_US_MR, mode);
+
+ /*
+ * when switching the mode, set the RTS line state according to the
+ * new mode, otherwise keep the former state
+ */
+ if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
+ unsigned int rts_state;
+
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* let the hardware control the RTS line */
+ rts_state = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to low level */
+ rts_state = ATMEL_US_RTSEN;
+ }
+
+ atmel_uart_writel(port, ATMEL_US_CR, rts_state);
+ }
+
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
atmel_port->tx_stopped = false;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 537896c..13e705b 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -238,6 +238,7 @@
enum lpuart_type {
VF610_LPUART,
LS1021A_LPUART,
+ LS1028A_LPUART,
IMX7ULP_LPUART,
IMX8QXP_LPUART,
};
@@ -268,6 +269,7 @@
int rx_dma_rng_buf_len;
unsigned int dma_tx_nents;
wait_queue_head_t dma_wait;
+ bool id_allocated;
};
struct lpuart_soc_data {
@@ -281,11 +283,16 @@
.iotype = UPIO_MEM,
};
-static const struct lpuart_soc_data ls_data = {
+static const struct lpuart_soc_data ls1021a_data = {
.devtype = LS1021A_LPUART,
.iotype = UPIO_MEM32BE,
};
+static const struct lpuart_soc_data ls1028a_data = {
+ .devtype = LS1028A_LPUART,
+ .iotype = UPIO_MEM32,
+};
+
static struct lpuart_soc_data imx7ulp_data = {
.devtype = IMX7ULP_LPUART,
.iotype = UPIO_MEM32,
@@ -300,7 +307,8 @@
static const struct of_device_id lpuart_dt_ids[] = {
{ .compatible = "fsl,vf610-lpuart", .data = &vf_data, },
- { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, },
+ { .compatible = "fsl,ls1021a-lpuart", .data = &ls1021a_data, },
+ { .compatible = "fsl,ls1028a-lpuart", .data = &ls1028a_data, },
{ .compatible = "fsl,imx7ulp-lpuart", .data = &imx7ulp_data, },
{ .compatible = "fsl,imx8qxp-lpuart", .data = &imx8qxp_data, },
{ /* sentinel */ }
@@ -310,6 +318,12 @@
/* Forward declare this for the dma callbacks*/
static void lpuart_dma_tx_complete(void *arg);
+static inline bool is_layerscape_lpuart(struct lpuart_port *sport)
+{
+ return (sport->devtype == LS1021A_LPUART ||
+ sport->devtype == LS1028A_LPUART);
+}
+
static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
{
return sport->devtype == IMX8QXP_LPUART;
@@ -437,8 +451,8 @@
}
sport->dma_tx_desc = dmaengine_prep_slave_sg(sport->dma_tx_chan, sgl,
- sport->dma_tx_nents,
- DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+ ret, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT);
if (!sport->dma_tx_desc) {
dma_unmap_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
dev_err(dev, "Cannot prepare TX slave DMA!\n");
@@ -634,26 +648,24 @@
spin_lock_irqsave(&sport->port.lock, flags);
/* Disable Rx & Tx */
- lpuart32_write(&sport->port, UARTCTRL, 0);
+ lpuart32_write(&sport->port, 0, UARTCTRL);
temp = lpuart32_read(&sport->port, UARTFIFO);
/* Enable Rx and Tx FIFO */
- lpuart32_write(&sport->port, UARTFIFO,
- temp | UARTFIFO_RXFE | UARTFIFO_TXFE);
+ lpuart32_write(&sport->port, temp | UARTFIFO_RXFE | UARTFIFO_TXFE, UARTFIFO);
/* flush Tx and Rx FIFO */
- lpuart32_write(&sport->port, UARTFIFO,
- UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH);
+ lpuart32_write(&sport->port, UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH, UARTFIFO);
/* explicitly clear RDRF */
if (lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_RDRF) {
lpuart32_read(&sport->port, UARTDATA);
- lpuart32_write(&sport->port, UARTFIFO, UARTFIFO_RXUF);
+ lpuart32_write(&sport->port, UARTFIFO_RXUF, UARTFIFO);
}
/* Enable Rx and Tx */
- lpuart32_write(&sport->port, UARTCTRL, UARTCTRL_RE | UARTCTRL_TE);
+ lpuart32_write(&sport->port, UARTCTRL_RE | UARTCTRL_TE, UARTCTRL);
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
@@ -662,12 +674,12 @@
static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c)
{
lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE);
- lpuart32_write(port, UARTDATA, c);
+ lpuart32_write(port, c, UARTDATA);
}
static int lpuart32_poll_get_char(struct uart_port *port)
{
- if (!(lpuart32_read(port, UARTSTAT) & UARTSTAT_RDRF))
+ if (!(lpuart32_read(port, UARTWATER) >> UARTWATER_RXCNT_OFF))
return NO_POLL_CHAR;
return lpuart32_read(port, UARTDATA);
@@ -1554,6 +1566,17 @@
sport->rxfifo_size = UARTFIFO_DEPTH((temp >> UARTFIFO_RXSIZE_OFF) &
UARTFIFO_FIFOSIZE_MASK);
+ /*
+ * The LS1021A and LS1028A have a fixed FIFO depth of 16 words.
+ * Although they support the RX/TXSIZE fields, their encoding is
+ * different. Eg the reference manual states 0b101 is 16 words.
+ */
+ if (is_layerscape_lpuart(sport)) {
+ sport->rxfifo_size = 16;
+ sport->txfifo_size = 16;
+ sport->port.fifosize = sport->txfifo_size;
+ }
+
spin_lock_irqsave(&sport->port.lock, flags);
lpuart32_setup_watermark_enable(sport);
@@ -2230,6 +2253,9 @@
bd = lpuart32_read(&sport->port, UARTBAUD);
bd &= UARTBAUD_SBR_MASK;
+ if (!bd)
+ return;
+
sbr = bd;
uartclk = lpuart_get_baud_clk_rate(sport);
/*
@@ -2382,26 +2408,13 @@
if (!sport)
return -ENOMEM;
- ret = of_alias_get_id(np, "serial");
- if (ret < 0) {
- ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL);
- if (ret < 0) {
- dev_err(&pdev->dev, "port line is full, add device failed\n");
- return ret;
- }
- }
- if (ret >= ARRAY_SIZE(lpuart_ports)) {
- dev_err(&pdev->dev, "serial%d out of range\n", ret);
- return -EINVAL;
- }
- sport->port.line = ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(sport->port.membase))
return PTR_ERR(sport->port.membase);
sport->port.membase += sdata->reg_off;
- sport->port.mapbase = res->start;
+ sport->port.mapbase = res->start + sdata->reg_off;
sport->port.dev = &pdev->dev;
sport->port.type = PORT_LPUART;
sport->devtype = sdata->devtype;
@@ -2435,9 +2448,25 @@
}
}
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "port line is full, add device failed\n");
+ return ret;
+ }
+ sport->id_allocated = true;
+ }
+ if (ret >= ARRAY_SIZE(lpuart_ports)) {
+ dev_err(&pdev->dev, "serial%d out of range\n", ret);
+ ret = -EINVAL;
+ goto failed_out_of_range;
+ }
+ sport->port.line = ret;
+
ret = lpuart_enable_clks(sport);
if (ret)
- return ret;
+ goto failed_clock_enable;
sport->port.uartclk = lpuart_get_baud_clk_rate(sport);
lpuart_ports[sport->port.line] = sport;
@@ -2487,6 +2516,10 @@
failed_attach_port:
failed_irq_request:
lpuart_disable_clks(sport);
+failed_clock_enable:
+failed_out_of_range:
+ if (sport->id_allocated)
+ ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
return ret;
}
@@ -2496,7 +2529,8 @@
uart_remove_one_port(&lpuart_reg, &sport->port);
- ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
+ if (sport->id_allocated)
+ ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
lpuart_disable_clks(sport);
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ffefd21..31033d5 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1230,6 +1230,9 @@
struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
/* stop activity */
tasklet_kill(&ifx_dev->io_work_tasklet);
+
+ pm_runtime_disable(&spi->dev);
+
/* free irq */
free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev);
free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 5e08f26..e5ed4ab 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -603,7 +603,7 @@
sport->tx_bytes = uart_circ_chars_pending(xmit);
- if (xmit->tail < xmit->head) {
+ if (xmit->tail < xmit->head || xmit->head == 0) {
sport->dma_tx_nents = 1;
sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
} else {
@@ -619,7 +619,7 @@
dev_err(dev, "DMA mapping error for TX.\n");
return;
}
- desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
+ desc = dmaengine_prep_slave_sg(chan, sgl, ret,
DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
if (!desc) {
dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
@@ -700,22 +700,33 @@
}
}
-static irqreturn_t imx_uart_rtsint(int irq, void *dev_id)
+static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id)
{
struct imx_port *sport = dev_id;
u32 usr1;
- spin_lock(&sport->port.lock);
-
imx_uart_writel(sport, USR1_RTSD, USR1);
usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS;
uart_handle_cts_change(&sport->port, !!usr1);
wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
- spin_unlock(&sport->port.lock);
return IRQ_HANDLED;
}
+static irqreturn_t imx_uart_rtsint(int irq, void *dev_id)
+{
+ struct imx_port *sport = dev_id;
+ irqreturn_t ret;
+
+ spin_lock(&sport->port.lock);
+
+ ret = __imx_uart_rtsint(irq, dev_id);
+
+ spin_unlock(&sport->port.lock);
+
+ return ret;
+}
+
static irqreturn_t imx_uart_txint(int irq, void *dev_id)
{
struct imx_port *sport = dev_id;
@@ -726,14 +737,12 @@
return IRQ_HANDLED;
}
-static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
+static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
{
struct imx_port *sport = dev_id;
unsigned int rx, flg, ignored = 0;
struct tty_port *port = &sport->port.state->port;
- spin_lock(&sport->port.lock);
-
while (imx_uart_readl(sport, USR2) & USR2_RDR) {
u32 usr2;
@@ -792,11 +801,25 @@
}
out:
- spin_unlock(&sport->port.lock);
tty_flip_buffer_push(port);
+
return IRQ_HANDLED;
}
+static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
+{
+ struct imx_port *sport = dev_id;
+ irqreturn_t ret;
+
+ spin_lock(&sport->port.lock);
+
+ ret = __imx_uart_rxint(irq, dev_id);
+
+ spin_unlock(&sport->port.lock);
+
+ return ret;
+}
+
static void imx_uart_clear_rx_errors(struct imx_port *sport);
/*
@@ -854,6 +877,14 @@
struct imx_port *sport = dev_id;
unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4;
irqreturn_t ret = IRQ_NONE;
+ unsigned long flags = 0;
+
+ /*
+ * IRQs might not be disabled upon entering this interrupt handler,
+ * e.g. when interrupt handlers are forced to be threaded. To support
+ * this scenario as well, disable IRQs when acquiring the spinlock.
+ */
+ spin_lock_irqsave(&sport->port.lock, flags);
usr1 = imx_uart_readl(sport, USR1);
usr2 = imx_uart_readl(sport, USR2);
@@ -888,27 +919,25 @@
usr2 &= ~USR2_ORE;
if (usr1 & (USR1_RRDY | USR1_AGTIM)) {
- imx_uart_rxint(irq, dev_id);
+ __imx_uart_rxint(irq, dev_id);
ret = IRQ_HANDLED;
}
if ((usr1 & USR1_TRDY) || (usr2 & USR2_TXDC)) {
- imx_uart_txint(irq, dev_id);
+ imx_uart_transmit_buffer(sport);
ret = IRQ_HANDLED;
}
if (usr1 & USR1_DTRD) {
imx_uart_writel(sport, USR1_DTRD, USR1);
- spin_lock(&sport->port.lock);
imx_uart_mctrl_check(sport);
- spin_unlock(&sport->port.lock);
ret = IRQ_HANDLED;
}
if (usr1 & USR1_RTSD) {
- imx_uart_rtsint(irq, dev_id);
+ __imx_uart_rtsint(irq, dev_id);
ret = IRQ_HANDLED;
}
@@ -923,6 +952,8 @@
ret = IRQ_HANDLED;
}
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
return ret;
}
@@ -1911,16 +1942,6 @@
unsigned int ucr1;
unsigned long flags = 0;
int locked = 1;
- int retval;
-
- retval = clk_enable(sport->clk_per);
- if (retval)
- return;
- retval = clk_enable(sport->clk_ipg);
- if (retval) {
- clk_disable(sport->clk_per);
- return;
- }
if (sport->port.sysrq)
locked = 0;
@@ -1956,9 +1977,6 @@
if (locked)
spin_unlock_irqrestore(&sport->port.lock, flags);
-
- clk_disable(sport->clk_ipg);
- clk_disable(sport->clk_per);
}
/*
@@ -2059,15 +2077,14 @@
retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
- clk_disable(sport->clk_ipg);
if (retval) {
- clk_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_ipg);
goto error_console;
}
- retval = clk_prepare(sport->clk_per);
+ retval = clk_prepare_enable(sport->clk_per);
if (retval)
- clk_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_ipg);
error_console:
return retval;
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index bf0e2a4..c6f927a 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -815,7 +815,9 @@
/* Parse any modem signal changes */
jsm_dbg(INTR, &ch->ch_bd->pci_dev,
"MOD_STAT: sending to parse_modem_sigs\n");
+ spin_lock_irqsave(&ch->uart_port.lock, lock_flags);
neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+ spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags);
}
}
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 689774c..8438454 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -187,6 +187,7 @@
static int jsm_tty_open(struct uart_port *port)
{
+ unsigned long lock_flags;
struct jsm_board *brd;
struct jsm_channel *channel =
container_of(port, struct jsm_channel, uart_port);
@@ -240,6 +241,7 @@
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
+ spin_lock_irqsave(&port->lock, lock_flags);
termios = &port->state->port.tty->termios;
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
@@ -259,6 +261,7 @@
jsm_carrier(channel);
channel->ch_open_count++;
+ spin_unlock_irqrestore(&port->lock, lock_flags);
jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
return 0;
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index c7d51b5..f5608ad 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -20,6 +20,7 @@
#include <linux/vt_kern.h>
#include <linux/input.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#define MAX_CONFIG_LEN 40
@@ -27,6 +28,7 @@
/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */
static int configured = -1;
+static DEFINE_MUTEX(config_mutex);
static char config[MAX_CONFIG_LEN];
static struct kparam_string kps = {
@@ -38,6 +40,8 @@
static struct tty_driver *kgdb_tty_driver;
static int kgdb_tty_line;
+static struct platform_device *kgdboc_pdev;
+
#ifdef CONFIG_KDB_KEYBOARD
static int kgdboc_reset_connect(struct input_handler *handler,
struct input_dev *dev,
@@ -133,11 +137,13 @@
static void cleanup_kgdboc(void)
{
+ if (configured != 1)
+ return;
+
if (kgdb_unregister_nmi_console())
return;
kgdboc_unregister_kbd();
- if (configured == 1)
- kgdb_unregister_io_module(&kgdboc_io_ops);
+ kgdb_unregister_io_module(&kgdboc_io_ops);
}
static int configure_kgdboc(void)
@@ -200,20 +206,79 @@
kgdb_unregister_io_module(&kgdboc_io_ops);
noconfig:
kgdboc_unregister_kbd();
- config[0] = 0;
configured = 0;
- cleanup_kgdboc();
return err;
}
+static int kgdboc_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ mutex_lock(&config_mutex);
+ if (configured != 1) {
+ ret = configure_kgdboc();
+
+ /* Convert "no device" to "defer" so we'll keep trying */
+ if (ret == -ENODEV)
+ ret = -EPROBE_DEFER;
+ }
+ mutex_unlock(&config_mutex);
+
+ return ret;
+}
+
+static struct platform_driver kgdboc_platform_driver = {
+ .probe = kgdboc_probe,
+ .driver = {
+ .name = "kgdboc",
+ .suppress_bind_attrs = true,
+ },
+};
+
static int __init init_kgdboc(void)
{
- /* Already configured? */
- if (configured == 1)
+ int ret;
+
+ /*
+ * kgdboc is a little bit of an odd "platform_driver". It can be
+ * up and running long before the platform_driver object is
+ * created and thus doesn't actually store anything in it. There's
+ * only one instance of kgdb so anything is stored as global state.
+ * The platform_driver is only created so that we can leverage the
+ * kernel's mechanisms (like -EPROBE_DEFER) to call us when our
+ * underlying tty is ready. Here we init our platform driver and
+ * then create the single kgdboc instance.
+ */
+ ret = platform_driver_register(&kgdboc_platform_driver);
+ if (ret)
+ return ret;
+
+ kgdboc_pdev = platform_device_alloc("kgdboc", PLATFORM_DEVID_NONE);
+ if (!kgdboc_pdev) {
+ ret = -ENOMEM;
+ goto err_did_register;
+ }
+
+ ret = platform_device_add(kgdboc_pdev);
+ if (!ret)
return 0;
- return configure_kgdboc();
+ platform_device_put(kgdboc_pdev);
+
+err_did_register:
+ platform_driver_unregister(&kgdboc_platform_driver);
+ return ret;
+}
+
+static void exit_kgdboc(void)
+{
+ mutex_lock(&config_mutex);
+ cleanup_kgdboc();
+ mutex_unlock(&config_mutex);
+
+ platform_device_unregister(kgdboc_pdev);
+ platform_driver_unregister(&kgdboc_platform_driver);
}
static int kgdboc_get_char(void)
@@ -236,24 +301,20 @@
const struct kernel_param *kp)
{
size_t len = strlen(kmessage);
+ int ret = 0;
if (len >= MAX_CONFIG_LEN) {
pr_err("config string too long\n");
return -ENOSPC;
}
- /* Only copy in the string if the init function has not run yet */
- if (configured < 0) {
- strcpy(config, kmessage);
- return 0;
- }
-
if (kgdb_connected) {
pr_err("Cannot reconfigure while KGDB is connected.\n");
-
return -EBUSY;
}
+ mutex_lock(&config_mutex);
+
strcpy(config, kmessage);
/* Chop out \n char as a result of echo */
if (len && config[len - 1] == '\n')
@@ -262,8 +323,30 @@
if (configured == 1)
cleanup_kgdboc();
- /* Go and configure with the new params. */
- return configure_kgdboc();
+ /*
+ * Configure with the new params as long as init already ran.
+ * Note that we can get called before init if someone loads us
+ * with "modprobe kgdboc kgdboc=..." or if they happen to use the
+ * the odd syntax of "kgdboc.kgdboc=..." on the kernel command.
+ */
+ if (configured >= 0)
+ ret = configure_kgdboc();
+
+ /*
+ * If we couldn't configure then clear out the config. Note that
+ * specifying an invalid config on the kernel command line vs.
+ * through sysfs have slightly different behaviors. If we fail
+ * to configure what was specified on the kernel command line
+ * we'll leave it in the 'config' and return -EPROBE_DEFER from
+ * our probe. When specified through sysfs userspace is
+ * responsible for loading the tty driver before setting up.
+ */
+ if (ret)
+ config[0] = '\0';
+
+ mutex_unlock(&config_mutex);
+
+ return ret;
}
static int dbg_restore_graphics;
@@ -326,15 +409,8 @@
/* This is only available if kgdboc is a built in for early debugging */
static int __init kgdboc_early_init(char *opt)
{
- /* save the first character of the config string because the
- * init routine can destroy it.
- */
- char save_ch;
-
kgdboc_option_setup(opt);
- save_ch = config[0];
- init_kgdboc();
- config[0] = save_ch;
+ configure_kgdboc();
return 0;
}
@@ -342,7 +418,7 @@
#endif /* CONFIG_KGDB_SERIAL_CONSOLE */
module_init(init_kgdboc);
-module_exit(cleanup_kgdboc);
+module_exit(exit_kgdboc);
module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644);
MODULE_PARM_DESC(kgdboc, "<serial_device>[,baud]");
MODULE_DESCRIPTION("KGDB Console TTY Driver");
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 8434bd5..5bf8dd6 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1528,6 +1528,8 @@
#ifdef CONFIG_SPI_MASTER
ret = spi_register_driver(&max310x_spi_driver);
+ if (ret)
+ uart_unregister_driver(&max310x_uart);
#endif
return ret;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 3657a24..e0718ee 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -980,6 +980,7 @@
static void msm_reset(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int mr;
/* reset everything */
msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
@@ -987,7 +988,10 @@
msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
- msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+ mr = msm_read(port, UART_MR1);
+ mr &= ~UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
/* Disable DM modes */
if (msm_port->is_uartdm)
@@ -1576,6 +1580,7 @@
int num_newlines = 0;
bool replaced = false;
void __iomem *tf;
+ int locked = 1;
if (is_uartdm)
tf = port->membase + UARTDM_TF;
@@ -1588,7 +1593,13 @@
num_newlines++;
count += num_newlines;
- spin_lock(&port->lock);
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&port->lock);
+ else
+ spin_lock(&port->lock);
+
if (is_uartdm)
msm_reset_dm_count(port, count);
@@ -1624,7 +1635,9 @@
iowrite32_rep(tf, buf, 1);
i += num_chars;
}
- spin_unlock(&port->lock);
+
+ if (locked)
+ spin_unlock(&port->lock);
}
static void msm_console_write(struct console *co, const char *s,
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index c12a125..51b4d8d 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -445,12 +445,11 @@
static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
{
- struct mvebu_uart *mvuart = to_mvuart(port);
unsigned int d_divisor, m_divisor;
u32 brdv, osamp;
- if (IS_ERR(mvuart->clk))
- return -PTR_ERR(mvuart->clk);
+ if (!port->uartclk)
+ return -EOPNOTSUPP;
/*
* The baudrate is derived from the UART clock thanks to two divisors:
@@ -463,7 +462,7 @@
* makes use of D to configure the desired baudrate.
*/
m_divisor = OSAMP_DEFAULT_DIVISOR;
- d_divisor = DIV_ROUND_UP(port->uartclk, baud * m_divisor);
+ d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor);
brdv = readl(port->membase + UART_BRDV);
brdv &= ~BRDV_BAUD_MASK;
@@ -482,7 +481,7 @@
struct ktermios *old)
{
unsigned long flags;
- unsigned int baud;
+ unsigned int baud, min_baud, max_baud;
spin_lock_irqsave(&port->lock, flags);
@@ -501,16 +500,21 @@
port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR;
/*
+ * Maximal divisor is 1023 * 16 when using default (x16) scheme.
* Maximum achievable frequency with simple baudrate divisor is 230400.
* Since the error per bit frame would be of more than 15%, achieving
* higher frequencies would require to implement the fractional divisor
* feature.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+ min_baud = DIV_ROUND_UP(port->uartclk, 1023 * 16);
+ max_baud = 230400;
+
+ baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud);
if (mvebu_uart_baud_rate_set(port, baud)) {
/* No clock available, baudrate cannot be changed */
if (old)
- baud = uart_get_baud_rate(port, old, NULL, 0, 230400);
+ baud = uart_get_baud_rate(port, old, NULL,
+ min_baud, max_baud);
} else {
tty_termios_encode_baud_rate(termios, baud, baud);
uart_update_timeout(port, termios->c_cflag, baud);
@@ -648,6 +652,14 @@
(val & STAT_TX_RDY(port)), 1, 10000);
}
+static void wait_for_xmite(struct uart_port *port)
+{
+ u32 val;
+
+ readl_poll_timeout_atomic(port->membase + UART_STAT, val,
+ (val & STAT_TX_EMP), 1, 10000);
+}
+
static void mvebu_uart_console_putchar(struct uart_port *port, int ch)
{
wait_for_xmitr(port);
@@ -675,7 +687,7 @@
uart_console_write(port, s, count, mvebu_uart_console_putchar);
- wait_for_xmitr(port);
+ wait_for_xmite(port);
if (ier)
writel(ier, port->membase + UART_CTRL(port));
@@ -810,9 +822,6 @@
return -EINVAL;
}
- if (!match)
- return -ENODEV;
-
/* Assume that all UART ports have a DT alias or none has */
id = of_alias_get_id(pdev->dev.of_node, "serial");
if (!pdev->dev.of_node || id < 0)
@@ -851,7 +860,7 @@
port->membase = devm_ioremap_resource(&pdev->dev, reg);
if (IS_ERR(port->membase))
- return -PTR_ERR(port->membase);
+ return PTR_ERR(port->membase);
mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart),
GFP_KERNEL);
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index e345259..5d483e9 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1701,21 +1701,21 @@
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = irq;
- goto out_disable_clks;
+ goto out_iounmap;
}
s->port.irq = irq;
ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
dev_name(&pdev->dev), s);
if (ret)
- goto out_disable_clks;
+ goto out_iounmap;
platform_set_drvdata(pdev, s);
ret = mxs_auart_init_gpios(s, &pdev->dev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
- goto out_disable_clks;
+ goto out_iounmap;
}
/*
@@ -1723,7 +1723,7 @@
*/
ret = mxs_auart_request_gpio_irq(s);
if (ret)
- goto out_disable_clks;
+ goto out_iounmap;
auart_port[s->port.line] = s;
@@ -1749,6 +1749,9 @@
mxs_auart_free_gpio_irq(s);
auart_port[pdev->id] = NULL;
+out_iounmap:
+ iounmap(s->port.membase);
+
out_disable_clks:
if (is_asm9260_auart(s)) {
clk_disable_unprepare(s->clk);
@@ -1764,6 +1767,7 @@
uart_remove_one_port(&auart_driver, &s->port);
auart_port[pdev->id] = NULL;
mxs_auart_free_gpio_irq(s);
+ iounmap(s->port.membase);
if (is_asm9260_auart(s)) {
clk_disable_unprepare(s->clk);
clk_disable_unprepare(s->clk_ahb);
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index d2d8b34..c55c850 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -680,6 +680,12 @@
return PTR_ERR(owl_port->clk);
}
+ ret = clk_prepare_enable(owl_port->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "could not enable clk\n");
+ return ret;
+ }
+
owl_port->port.dev = &pdev->dev;
owl_port->port.line = pdev->id;
owl_port->port.type = PORT_OWL;
@@ -712,6 +718,7 @@
uart_remove_one_port(&owl_uart_driver, &owl_port->port);
owl_uart_ports[pdev->id] = NULL;
+ clk_disable_unprepare(owl_port->clk);
return 0;
}
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 6157213..c16234b 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -233,6 +233,7 @@
struct dma_chan *chan_rx;
struct scatterlist *sg_tx_p;
int nent;
+ int orig_nent;
struct scatterlist sg_rx;
int tx_dma_use;
void *rx_buf_virt;
@@ -787,9 +788,10 @@
}
xmit->tail &= UART_XMIT_SIZE - 1;
async_tx_ack(priv->desc_tx);
- dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
+ dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
priv->tx_dma_use = 0;
priv->nent = 0;
+ priv->orig_nent = 0;
kfree(priv->sg_tx_p);
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
}
@@ -1010,6 +1012,7 @@
dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
return 0;
}
+ priv->orig_nent = num;
priv->nent = nent;
for (i = 0; i < nent; i++, sg++) {
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 14c6306..9b148f7 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -125,6 +125,7 @@
static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop);
static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
static void qcom_geni_serial_stop_rx(struct uart_port *uport);
+static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop);
static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
32000000, 48000000, 64000000, 80000000,
@@ -615,7 +616,7 @@
u32 irq_en;
u32 status;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- u32 irq_clear = S_CMD_DONE_EN;
+ u32 s_irq_status;
irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN);
@@ -631,10 +632,19 @@
return;
geni_se_cancel_s_cmd(&port->se);
- qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG,
- S_GENI_CMD_CANCEL, false);
+ qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
+ S_CMD_CANCEL_EN, true);
+ /*
+ * If timeout occurs secondary engine remains active
+ * and Abort sequence is executed.
+ */
+ s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
+ /* Flush the Rx buffer */
+ if (s_irq_status & S_RX_FIFO_LAST_EN)
+ qcom_geni_serial_handle_rx(uport, true);
+ writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
+
status = readl(uport->membase + SE_GENI_STATUS);
- writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR);
if (status & S_GENI_CMD_ACTIVE)
qcom_geni_serial_abort_rx(uport);
}
@@ -960,7 +970,7 @@
sampling_rate = UART_OVERSAMPLING;
/* Sampling rate is halved for IP versions >= 2.5 */
ver = geni_se_get_qup_hw_version(&port->se);
- if (GENI_SE_VERSION_MAJOR(ver) >= 2 && GENI_SE_VERSION_MINOR(ver) >= 5)
+ if (ver >= QUP_SE_VERSION_2_5)
sampling_rate /= 2;
clk_rate = get_clk_div_rate(baud, sampling_rate, &clk_div);
@@ -1053,7 +1063,7 @@
}
#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
-static int __init qcom_geni_console_setup(struct console *co, char *options)
+static int qcom_geni_console_setup(struct console *co, char *options)
{
struct uart_port *uport;
struct qcom_geni_serial_port *port;
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index 5690c09..944a4c0 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -195,7 +195,6 @@
void __iomem *bar0;
void __iomem *bar1;
spinlock_t card_lock;
- struct completion fw_loaded;
};
#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -664,17 +663,10 @@
card->initialized_ports = 0;
}
-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
{
- struct rp2_card *card = context;
resource_size_t phys_base;
- int i, rc = -ENOENT;
-
- if (!fw) {
- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
- RP2_FW_NAME);
- goto no_fw;
- }
+ int i, rc = 0;
phys_base = pci_resource_start(card->pdev, 1);
@@ -720,23 +712,13 @@
card->initialized_ports++;
}
- release_firmware(fw);
-no_fw:
- /*
- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
- * has already returned success. So if something failed here,
- * we'll just leave the now-dormant device in place until somebody
- * unbinds it.
- */
- if (rc)
- dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
- complete(&card->fw_loaded);
+ return rc;
}
static int rp2_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ const struct firmware *fw;
struct rp2_card *card;
struct rp2_uart_port *ports;
void __iomem * const *bars;
@@ -747,7 +729,6 @@
return -ENOMEM;
pci_set_drvdata(pdev, card);
spin_lock_init(&card->card_lock);
- init_completion(&card->fw_loaded);
rc = pcim_enable_device(pdev);
if (rc)
@@ -780,22 +761,24 @@
return -ENOMEM;
card->ports = ports;
+ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
+ return rc;
+ }
+
+ rc = rp2_load_firmware(card, fw);
+
+ release_firmware(fw);
+ if (rc < 0)
+ return rc;
+
rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
IRQF_SHARED, DRV_NAME, card);
if (rc)
return rc;
- /*
- * Only catastrophic errors (e.g. ENOMEM) are reported here.
- * If the FW image is missing, we'll find out in rp2_fw_cb()
- * and print an error message.
- */
- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
- GFP_KERNEL, card, rp2_fw_cb);
- if (rc)
- return rc;
- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
-
return 0;
}
@@ -803,7 +786,6 @@
{
struct rp2_card *card = pci_get_drvdata(pdev);
- wait_for_completion(&card->fw_loaded);
rp2_remove_ports(card);
}
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 83fd516..c7683be 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1187,14 +1187,14 @@
struct s3c24xx_uart_info *info = ourport->info;
struct clk *clk;
unsigned long rate;
- unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+ unsigned int cnt, baud, quot, best_quot = 0;
char clkname[MAX_CLK_NAME_LENGTH];
int calc_deviation, deviation = (1 << 30) - 1;
- clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
- ourport->info->def_clk_sel;
for (cnt = 0; cnt < info->num_clks; cnt++) {
- if (!(clk_sel & (1 << cnt)))
+ /* Keep selected clock if provided */
+ if (ourport->cfg->clk_sel &&
+ !(ourport->cfg->clk_sel & (1 << cnt)))
continue;
sprintf(clkname, "clk_uart_baud%d", cnt);
@@ -1791,9 +1791,11 @@
ourport->tx_irq = ret + 1;
}
- ret = platform_get_irq(platdev, 1);
- if (ret > 0)
- ourport->tx_irq = ret;
+ if (!s3c24xx_serial_has_interrupt_mask(port)) {
+ ret = platform_get_irq(platdev, 1);
+ if (ret > 0)
+ ourport->tx_irq = ret;
+ }
/*
* DMA is currently supported only on DT platforms, if DMA properties
* are specified.
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 2f59951..64f18bf 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -332,7 +332,7 @@
do {
lsr = tegra_uart_read(tup, UART_LSR);
- if ((lsr | UART_LSR_TEMT) && !(lsr & UART_LSR_DR))
+ if ((lsr & UART_LSR_TEMT) && !(lsr & UART_LSR_DR))
break;
udelay(1);
} while (--tmout);
@@ -651,11 +651,14 @@
ch = (unsigned char) tegra_uart_read(tup, UART_RX);
tup->uport.icount.rx++;
- if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
- tty_insert_flip_char(tty, ch, flag);
+ if (uart_handle_sysrq_char(&tup->uport, ch))
+ continue;
if (tup->uport.ignore_status_mask & UART_LSR_DR)
continue;
+
+ if (tty)
+ tty_insert_flip_char(tty, ch, flag);
} while (1);
}
@@ -1025,9 +1028,11 @@
if (tup->cdata->fifo_mode_enable_status) {
ret = tegra_uart_wait_fifo_mode_enabled(tup);
- dev_err(tup->uport.dev, "FIFO mode not enabled\n");
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(tup->uport.dev,
+ "Failed to enable FIFO mode: %d\n", ret);
return ret;
+ }
} else {
/*
* For all tegra devices (up to t210), there is a hardware
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index c4a414a..fa3bd8a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -863,9 +863,11 @@
goto check_and_exit;
}
- retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
- if (retval && (change_irq || change_port))
- goto exit;
+ if (change_irq || change_port) {
+ retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
+ if (retval)
+ goto exit;
+ }
/*
* Ask the low level driver to verify the settings.
@@ -1111,7 +1113,7 @@
if (!uport)
goto out;
- if (uport->type != PORT_UNKNOWN)
+ if (uport->type != PORT_UNKNOWN && uport->ops->break_ctl)
uport->ops->break_ctl(uport, break_state);
ret = 0;
out:
@@ -1304,7 +1306,7 @@
unsigned long flags;
if (!port->rs485_config)
- return -ENOIOCTLCMD;
+ return -ENOTTY;
if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))
return -EFAULT;
@@ -1328,7 +1330,7 @@
struct serial_iso7816 aux;
if (!port->iso7816_config)
- return -ENOIOCTLCMD;
+ return -ENOTTY;
spin_lock_irqsave(&port->lock, flags);
aux = port->iso7816;
@@ -1348,7 +1350,7 @@
unsigned long flags;
if (!port->iso7816_config)
- return -ENOIOCTLCMD;
+ return -ENOTTY;
if (copy_from_user(&iso7816, iso7816_user, sizeof(*iso7816_user)))
return -EFAULT;
@@ -1465,6 +1467,10 @@
{
struct uart_state *state = tty->driver_data;
struct uart_port *uport;
+ struct tty_port *port = &state->port;
+
+ if (!tty_port_initialized(port))
+ return;
mutex_lock(&state->port.mutex);
uport = uart_port_check(state);
@@ -2834,6 +2840,7 @@
if (uport->cons && uport->dev)
of_console_check(uport->dev->of_node, uport->cons->name, uport->line);
+ tty_port_link_device(port, drv->tty_driver, uport->line);
uart_configure_port(drv, state, uport);
port->console = uart_console(uport);
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index d22ccb3..8507f18 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1283,6 +1283,9 @@
#ifdef ENABLE_SERIAL_TXX9_PCI
ret = pci_register_driver(&serial_txx9_pci_driver);
+ if (ret) {
+ platform_driver_unregister(&serial_txx9_plat_driver);
+ }
#endif
if (ret == 0)
goto out;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 22e5d4e..ecff9b2 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -613,6 +613,14 @@
ctrl &= ~SCSCR_TIE;
serial_port_out(port, SCSCR, ctrl);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (to_sci_port(port)->chan_tx &&
+ !dma_submit_error(to_sci_port(port)->cookie_tx)) {
+ dmaengine_terminate_async(to_sci_port(port)->chan_tx);
+ to_sci_port(port)->cookie_tx = -EINVAL;
+ }
+#endif
}
static void sci_start_rx(struct uart_port *port)
@@ -873,9 +881,16 @@
tty_insert_flip_char(tport, c, TTY_NORMAL);
} else {
for (i = 0; i < count; i++) {
- char c = serial_port_in(port, SCxRDR);
+ char c;
- status = serial_port_in(port, SCxSR);
+ if (port->type == PORT_SCIF ||
+ port->type == PORT_HSCIF) {
+ status = serial_port_in(port, SCxSR);
+ c = serial_port_in(port, SCxRDR);
+ } else {
+ c = serial_port_in(port, SCxRDR);
+ status = serial_port_in(port, SCxSR);
+ }
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
continue;
@@ -1019,10 +1034,10 @@
{
unsigned int bits;
+ if (rx_trig >= port->fifosize)
+ rx_trig = port->fifosize - 1;
if (rx_trig < 1)
rx_trig = 1;
- if (rx_trig >= port->fifosize)
- rx_trig = port->fifosize;
/* HSCIF can be set to an arbitrary level. */
if (sci_getreg(port, HSRTRGR)->size) {
@@ -1748,6 +1763,10 @@
/* Handle BREAKs */
sci_handle_breaks(port);
+
+ /* drop invalid character received before break was detected */
+ serial_port_in(port, SCxRDR);
+
sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
return IRQ_HANDLED;
@@ -1827,7 +1846,8 @@
ret = sci_er_interrupt(irq, ptr);
/* Break Interrupt */
- if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
+ if (s->irqs[SCIx_ERI_IRQ] != s->irqs[SCIx_BRI_IRQ] &&
+ (ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
/* Overrun Interrupt */
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index d5f81b9..6a2dc82 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -618,10 +618,10 @@
*
* On the V0 SoC, the UART IP block is derived from the CPU clock source
* after a synchronous divide-by-two divider, so any CPU clock rate change
- * requires the UART baud rate to be updated. This presumably could corrupt any
- * serial word currently being transmitted or received. It would probably
- * be better to stop receives and transmits, then complete the baud rate
- * change, then re-enable them.
+ * requires the UART baud rate to be updated. This presumably corrupts any
+ * serial word currently being transmitted or received. In order to avoid
+ * corrupting the output data stream, we drain the transmit queue before
+ * allowing the clock's rate to be changed.
*/
static int sifive_serial_clk_notifier(struct notifier_block *nb,
unsigned long event, void *data)
@@ -629,6 +629,26 @@
struct clk_notifier_data *cnd = data;
struct sifive_serial_port *ssp = notifier_to_sifive_serial_port(nb);
+ if (event == PRE_RATE_CHANGE) {
+ /*
+ * The TX watermark is always set to 1 by this driver, which
+ * means that the TX busy bit will lower when there are 0 bytes
+ * left in the TX queue -- in other words, when the TX FIFO is
+ * empty.
+ */
+ __ssp_wait_for_xmitr(ssp);
+ /*
+ * On the cycle the TX FIFO goes empty there is still a full
+ * UART frame left to be transmitted in the shift register.
+ * The UART provides no way for software to directly determine
+ * when that last frame has been transmitted, so we just sleep
+ * here instead. As we're not tracking the number of stop bits
+ * they're just worst cased here. The rest of the serial
+ * framing parameters aren't configurable by software.
+ */
+ udelay(DIV_ROUND_UP(12 * 1000 * 1000, ssp->baud_rate));
+ }
+
if (event == POST_RATE_CHANGE && ssp->clkin_rate != cnd->new_rate) {
ssp->clkin_rate = cnd->new_rate;
__ssp_update_div(ssp);
@@ -840,6 +860,7 @@
static void __ssp_add_console_port(struct sifive_serial_port *ssp)
{
+ spin_lock_init(&ssp->port.lock);
sifive_serial_console_ports[ssp->port.line] = ssp;
}
@@ -952,6 +973,7 @@
/* Set up clock divider */
ssp->clkin_rate = clk_get_rate(ssp->clk);
ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE;
+ ssp->port.uartclk = ssp->baud_rate * 16;
__ssp_update_div(ssp);
platform_set_drvdata(pdev, ssp);
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 771d111..07573de 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -679,6 +679,9 @@
if (ims & SPRD_IMSR_TIMEOUT)
serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
+ if (ims & SPRD_IMSR_BREAK_DETECT)
+ serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT);
+
if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT |
SPRD_IMSR_TIMEOUT))
sprd_rx(port);
@@ -1100,14 +1103,13 @@
if (sup) {
uart_remove_one_port(&sprd_uart_driver, &sup->port);
sprd_port[sup->port.line] = NULL;
+ sprd_rx_free_buf(sup);
sprd_ports_num--;
}
if (!sprd_ports_num)
uart_unregister_driver(&sprd_uart_driver);
- sprd_rx_free_buf(sup);
-
return 0;
}
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index df90747..23b7bda 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -240,8 +240,8 @@
* cleared by the sequence [read SR - read DR].
*/
if ((sr & USART_SR_ERR_MASK) && ofs->icr != UNDEF_REG)
- stm32_clr_bits(port, ofs->icr, USART_ICR_ORECF |
- USART_ICR_PECF | USART_ICR_FECF);
+ writel_relaxed(sr & USART_SR_ERR_MASK,
+ port->membase + ofs->icr);
c = stm32_get_char(port, &sr, &stm32_port->last_res);
port->icount.rx++;
@@ -435,7 +435,7 @@
if (ofs->icr == UNDEF_REG)
stm32_clr_bits(port, ofs->isr, USART_SR_TC);
else
- stm32_set_bits(port, ofs->icr, USART_ICR_TCCF);
+ writel_relaxed(USART_ICR_TCCF, port->membase + ofs->icr);
if (stm32_port->tx_ch)
stm32_transmit_chars_dma(port);
@@ -502,7 +502,10 @@
struct stm32_port *stm32_port = to_stm32_port(port);
struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
- return readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE;
+ if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC)
+ return TIOCSER_TEMT;
+
+ return 0;
}
static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -688,8 +691,9 @@
unsigned int baud, bits;
u32 usartdiv, mantissa, fraction, oversampling;
tcflag_t cflag = termios->c_cflag;
- u32 cr1, cr2, cr3;
+ u32 cr1, cr2, cr3, isr;
unsigned long flags;
+ int ret;
if (!stm32_port->hw_flow_control)
cflag &= ~CRTSCTS;
@@ -698,6 +702,15 @@
spin_lock_irqsave(&port->lock, flags);
+ ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TC),
+ 10, 100000);
+
+ /* Send the TC error message only when ISR_TC is not set. */
+ if (ret)
+ dev_err(port->dev, "Transmission is not complete\n");
+
/* Stop serial port and reset value */
writel_relaxed(0, port->membase + ofs->cr1);
@@ -937,7 +950,7 @@
stm32_init_rs485(port, pdev);
if (stm32port->info->cfg.has_wakeup) {
- stm32port->wakeirq = platform_get_irq(pdev, 1);
+ stm32port->wakeirq = platform_get_irq_optional(pdev, 1);
if (stm32port->wakeirq <= 0 && stm32port->wakeirq != -ENXIO)
return stm32port->wakeirq ? : -ENODEV;
}
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index a175c10..a0b816e 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -127,9 +127,6 @@
/* Dummy bits */
#define USART_SR_DUMMY_RX BIT(16)
-/* USART_ICR (F7) */
-#define USART_CR_TC BIT(6)
-
/* USART_DR */
#define USART_DR_MASK GENMASK(8, 0)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 06e79c1..56066d9 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -508,21 +508,23 @@
static int ulite_console_setup(struct console *co, char *options)
{
- struct uart_port *port;
+ struct uart_port *port = NULL;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
-
- port = console_port;
+ if (co->index >= 0 && co->index < ULITE_NR_UARTS)
+ port = ulite_ports + co->index;
/* Has the device been initialized yet? */
- if (!port->mapbase) {
+ if (!port || !port->mapbase) {
pr_debug("console on ttyUL%i not present\n", co->index);
return -ENODEV;
}
+ console_port = port;
+
/* not initialized yet? */
if (!port->membase) {
if (ulite_request_port(port))
@@ -658,17 +660,6 @@
dev_set_drvdata(dev, port);
-#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
- /*
- * If console hasn't been found yet try to assign this port
- * because it is required to be assigned for console setup function.
- * If register_console() don't assign value, then console_port pointer
- * is cleanup.
- */
- if (ulite_uart_driver.cons->index == -1)
- console_port = port;
-#endif
-
/* Register the port */
rc = uart_add_one_port(&ulite_uart_driver, port);
if (rc) {
@@ -678,12 +669,6 @@
return rc;
}
-#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
- /* This is not port which is used for console that's why clean it up */
- if (ulite_uart_driver.cons->index == -1)
- console_port = NULL;
-#endif
-
return 0;
}
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 4e55bc3..9359c80 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -30,13 +30,15 @@
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
+#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS 16
#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
#define CDNS_UART_REGISTER_SPACE 0x1000
#define TX_TIMEOUT 500000
/* Rx Trigger level */
static int rx_trigger_level = 56;
-static int uartps_major;
module_param(rx_trigger_level, uint, 0444);
MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
@@ -182,7 +184,6 @@
* @pclk: APB clock
* @cdns_uart_driver: Pointer to UART driver
* @baud: Current baud rate
- * @id: Port ID
* @clk_rate_change_nb: Notifier block for clock changes
* @quirks: Flags for RXBS support.
*/
@@ -192,7 +193,6 @@
struct clk *pclk;
struct uart_driver *cdns_uart_driver;
unsigned int baud;
- int id;
struct notifier_block clk_rate_change_nb;
u32 quirks;
bool cts_override;
@@ -1119,6 +1119,8 @@
#endif
};
+static struct uart_driver cdns_uart_uart_driver;
+
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* cdns_uart_console_putchar - write the character to the FIFO buffer
@@ -1246,6 +1248,7 @@
int bits = 8;
int parity = 'n';
int flow = 'n';
+ unsigned long time_out;
if (!port->membase) {
pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
@@ -1256,8 +1259,25 @@
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
+ /* Wait for tx_empty before setting up the console */
+ time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
+
+ while (time_before(jiffies, time_out) &&
+ cdns_uart_tx_empty(port) != TIOCSER_TEMT)
+ cpu_relax();
+
return uart_set_options(port, co, baud, parity, bits, flow);
}
+
+static struct console cdns_uart_console = {
+ .name = CDNS_UART_TTY_NAME,
+ .write = cdns_uart_console_write,
+ .device = uart_console_device,
+ .setup = cdns_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+ .data = &cdns_uart_uart_driver,
+};
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
#ifdef CONFIG_PM_SLEEP
@@ -1389,89 +1409,8 @@
};
MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
-/*
- * Maximum number of instances without alias IDs but if there is alias
- * which target "< MAX_UART_INSTANCES" range this ID can't be used.
- */
-#define MAX_UART_INSTANCES 32
-
-/* Stores static aliases list */
-static DECLARE_BITMAP(alias_bitmap, MAX_UART_INSTANCES);
-static int alias_bitmap_initialized;
-
-/* Stores actual bitmap of allocated IDs with alias IDs together */
-static DECLARE_BITMAP(bitmap, MAX_UART_INSTANCES);
-/* Protect bitmap operations to have unique IDs */
-static DEFINE_MUTEX(bitmap_lock);
-
-static int cdns_get_id(struct platform_device *pdev)
-{
- int id, ret;
-
- mutex_lock(&bitmap_lock);
-
- /* Alias list is stable that's why get alias bitmap only once */
- if (!alias_bitmap_initialized) {
- ret = of_alias_get_alias_list(cdns_uart_of_match, "serial",
- alias_bitmap, MAX_UART_INSTANCES);
- if (ret && ret != -EOVERFLOW) {
- mutex_unlock(&bitmap_lock);
- return ret;
- }
-
- alias_bitmap_initialized++;
- }
-
- /* Make sure that alias ID is not taken by instance without alias */
- bitmap_or(bitmap, bitmap, alias_bitmap, MAX_UART_INSTANCES);
-
- dev_dbg(&pdev->dev, "Alias bitmap: %*pb\n",
- MAX_UART_INSTANCES, bitmap);
-
- /* Look for a serialN alias */
- id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (id < 0) {
- dev_warn(&pdev->dev,
- "No serial alias passed. Using the first free id\n");
-
- /*
- * Start with id 0 and check if there is no serial0 alias
- * which points to device which is compatible with this driver.
- * If alias exists then try next free position.
- */
- id = 0;
-
- for (;;) {
- dev_info(&pdev->dev, "Checking id %d\n", id);
- id = find_next_zero_bit(bitmap, MAX_UART_INSTANCES, id);
-
- /* No free empty instance */
- if (id == MAX_UART_INSTANCES) {
- dev_err(&pdev->dev, "No free ID\n");
- mutex_unlock(&bitmap_lock);
- return -EINVAL;
- }
-
- dev_dbg(&pdev->dev, "The empty id is %d\n", id);
- /* Check if ID is empty */
- if (!test_and_set_bit(id, bitmap)) {
- /* Break the loop if bit is taken */
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation passed\n",
- id);
- break;
- }
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation failed\n", id);
- /* if taking bit fails then try next one */
- id++;
- }
- }
-
- mutex_unlock(&bitmap_lock);
-
- return id;
-}
+/* Temporary variable for storing number of instances */
+static int instances;
/**
* cdns_uart_probe - Platform driver probe
@@ -1481,16 +1420,11 @@
*/
static int cdns_uart_probe(struct platform_device *pdev)
{
- int rc, irq;
+ int rc, id, irq;
struct uart_port *port;
struct resource *res;
struct cdns_uart *cdns_uart_data;
const struct of_device_id *match;
- struct uart_driver *cdns_uart_uart_driver;
- char *driver_name;
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- struct console *cdns_uart_console;
-#endif
cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
GFP_KERNEL);
@@ -1500,64 +1434,35 @@
if (!port)
return -ENOMEM;
- cdns_uart_uart_driver = devm_kzalloc(&pdev->dev,
- sizeof(*cdns_uart_uart_driver),
- GFP_KERNEL);
- if (!cdns_uart_uart_driver)
- return -ENOMEM;
+ /* Look for a serialN alias */
+ id = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (id < 0)
+ id = 0;
- cdns_uart_data->id = cdns_get_id(pdev);
- if (cdns_uart_data->id < 0)
- return cdns_uart_data->id;
-
- /* There is a need to use unique driver name */
- driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
- CDNS_UART_NAME, cdns_uart_data->id);
- if (!driver_name) {
- rc = -ENOMEM;
- goto err_out_id;
+ if (id >= CDNS_UART_NR_PORTS) {
+ dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+ return -ENODEV;
}
- cdns_uart_uart_driver->owner = THIS_MODULE;
- cdns_uart_uart_driver->driver_name = driver_name;
- cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME;
- cdns_uart_uart_driver->major = uartps_major;
- cdns_uart_uart_driver->minor = cdns_uart_data->id;
- cdns_uart_uart_driver->nr = 1;
-
+ if (!cdns_uart_uart_driver.state) {
+ cdns_uart_uart_driver.owner = THIS_MODULE;
+ cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
+ cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
+ cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
+ cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
+ cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
- GFP_KERNEL);
- if (!cdns_uart_console) {
- rc = -ENOMEM;
- goto err_out_id;
- }
-
- strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
- sizeof(cdns_uart_console->name));
- cdns_uart_console->index = cdns_uart_data->id;
- cdns_uart_console->write = cdns_uart_console_write;
- cdns_uart_console->device = uart_console_device;
- cdns_uart_console->setup = cdns_uart_console_setup;
- cdns_uart_console->flags = CON_PRINTBUFFER;
- cdns_uart_console->data = cdns_uart_uart_driver;
- cdns_uart_uart_driver->cons = cdns_uart_console;
+ cdns_uart_uart_driver.cons = &cdns_uart_console;
#endif
- rc = uart_register_driver(cdns_uart_uart_driver);
- if (rc < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
- goto err_out_id;
+ rc = uart_register_driver(&cdns_uart_uart_driver);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ return rc;
+ }
}
- cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
-
- /*
- * Setting up proper name_base needs to be done after uart
- * registration because tty_driver structure is not filled.
- * name_base is 0 by default.
- */
- cdns_uart_uart_driver->tty_driver->name_base = cdns_uart_data->id;
+ cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
if (match && match->data) {
@@ -1634,6 +1539,7 @@
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &cdns_uart_ops;
port->fifosize = CDNS_UART_FIFO_SIZE;
+ port->line = id;
/*
* Register the port.
@@ -1661,11 +1567,13 @@
* If register_console() don't assign value, then console_port pointer
* is cleanup.
*/
- if (!console_port)
+ if (!console_port) {
+ cdns_uart_console.index = id;
console_port = port;
+ }
#endif
- rc = uart_add_one_port(cdns_uart_uart_driver, port);
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
@@ -1675,13 +1583,17 @@
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(cdns_uart_uart_driver->cons->flags & CON_ENABLED))
+ !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) {
console_port = NULL;
+ cdns_uart_console.index = -1;
+ }
#endif
- uartps_major = cdns_uart_uart_driver->tty_driver->major;
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
"cts-override");
+
+ instances++;
+
return 0;
err_out_pm_disable:
@@ -1697,12 +1609,8 @@
err_out_clk_dis_pclk:
clk_disable_unprepare(cdns_uart_data->pclk);
err_out_unregister_driver:
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-err_out_id:
- mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
+ if (!instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
@@ -1725,10 +1633,6 @@
#endif
rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
port->mapbase = 0;
- mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
clk_disable_unprepare(cdns_uart_data->uartclk);
clk_disable_unprepare(cdns_uart_data->pclk);
pm_runtime_disable(&pdev->dev);
@@ -1741,13 +1645,8 @@
console_port = NULL;
#endif
- /* If this is last instance major number should be initialized */
- mutex_lock(&bitmap_lock);
- if (bitmap_empty(bitmap, MAX_UART_INSTANCES))
- uartps_major = 0;
- mutex_unlock(&bitmap_lock);
-
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+ if (!--instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index e8a9047..36f1a4d 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1334,10 +1334,10 @@
DBGINFO(("%s throttle\n", info->device_name));
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (C_CRTSCTS(tty)) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->signals &= ~SerialSignal_RTS;
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
}
@@ -1359,10 +1359,10 @@
else
send_xchar(tty, START_CHAR(tty));
}
- if (C_CRTSCTS(tty)) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->signals |= SerialSignal_RTS;
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
}
@@ -2560,8 +2560,8 @@
info->read_status_mask = IRQ_RXOVER;
if (I_INPCK(info->port.tty))
info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
- if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- info->read_status_mask |= MASK_BREAK;
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ info->read_status_mask |= MASK_BREAK;
if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
if (I_IGNBRK(info->port.tty)) {
@@ -3192,7 +3192,7 @@
info->signals &= ~SerialSignal_DTR;
spin_lock_irqsave(&info->lock,flags);
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
return 0;
}
@@ -3203,7 +3203,7 @@
struct slgt_info *info = container_of(port, struct slgt_info, port);
spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
+ get_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
return (info->signals & SerialSignal_DCD) ? 1 : 0;
}
@@ -3218,7 +3218,7 @@
info->signals |= SerialSignal_RTS | SerialSignal_DTR;
else
info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index fcb91bf..54b897a 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1453,10 +1453,10 @@
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (C_CRTSCTS(tty)) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals &= ~SerialSignal_RTS;
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
}
@@ -1482,10 +1482,10 @@
send_xchar(tty, START_CHAR(tty));
}
- if (C_CRTSCTS(tty)) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals |= SerialSignal_RTS;
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
}
@@ -2470,7 +2470,7 @@
if (status & SerialSignal_CTS) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx start...");
- info->port.tty->hw_stopped = 0;
+ info->port.tty->hw_stopped = 0;
tx_start(info);
info->pending_bh |= BH_TRANSMIT;
return;
@@ -2479,7 +2479,7 @@
if (!(status & SerialSignal_CTS)) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx stop...");
- info->port.tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = 1;
tx_stop(info);
}
}
@@ -2806,8 +2806,8 @@
info->read_status_mask2 = OVRN;
if (I_INPCK(info->port.tty))
info->read_status_mask2 |= PE | FRME;
- if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- info->read_status_mask1 |= BRKD;
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ info->read_status_mask1 |= BRKD;
if (I_IGNPAR(info->port.tty))
info->ignore_status_mask2 |= PE | FRME;
if (I_IGNBRK(info->port.tty)) {
@@ -3177,7 +3177,7 @@
unsigned long flags;
spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
+ get_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
@@ -3215,7 +3215,7 @@
info->serial_signals &= ~SerialSignal_DTR;
spin_lock_irqsave(&info->lock,flags);
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
return 0;
@@ -3227,7 +3227,7 @@
unsigned long flags;
spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
+ get_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
@@ -3243,7 +3243,7 @@
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- set_signals(info);
+ set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 802c121..ddfe873 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2176,8 +2176,6 @@
* Locking:
* Called functions take tty_ldiscs_lock
* current->signal->tty check is safe without locks
- *
- * FIXME: may race normal receive processing
*/
static int tiocsti(struct tty_struct *tty, char __user *p)
@@ -2193,8 +2191,10 @@
ld = tty_ldisc_ref_wait(tty);
if (!ld)
return -EIO;
+ tty_buffer_lock_exclusive(tty->port);
if (ld->ops->receive_buf)
ld->ops->receive_buf(tty, &ch, &mbz, 1);
+ tty_buffer_unlock_exclusive(tty->port);
tty_ldisc_deref(ld);
return 0;
}
@@ -2407,14 +2407,14 @@
* @p: pointer to result
*
* Obtain the modem status bits from the tty driver if the feature
- * is supported. Return -EINVAL if it is not available.
+ * is supported. Return -ENOTTY if it is not available.
*
* Locking: none (up to the driver)
*/
static int tty_tiocmget(struct tty_struct *tty, int __user *p)
{
- int retval = -EINVAL;
+ int retval = -ENOTTY;
if (tty->ops->tiocmget) {
retval = tty->ops->tiocmget(tty);
@@ -2432,7 +2432,7 @@
* @p: pointer to desired bits
*
* Set the modem status bits from the tty driver if the feature
- * is supported. Return -EINVAL if it is not available.
+ * is supported. Return -ENOTTY if it is not available.
*
* Locking: none (up to the driver)
*/
@@ -2444,7 +2444,7 @@
unsigned int set, clear, val;
if (tty->ops->tiocmset == NULL)
- return -EINVAL;
+ return -ENOTTY;
retval = get_user(val, p);
if (retval)
@@ -2731,9 +2731,11 @@
struct serial_struct32 v32;
struct serial_struct v;
int err;
- memset(&v, 0, sizeof(struct serial_struct));
- if (!tty->ops->set_serial)
+ memset(&v, 0, sizeof(v));
+ memset(&v32, 0, sizeof(v32));
+
+ if (!tty->ops->get_serial)
return -ENOTTY;
err = tty->ops->get_serial(tty, &v);
if (!err) {
@@ -2892,10 +2894,14 @@
struct task_struct *g, *p;
struct pid *session;
int i;
+ unsigned long flags;
if (!tty)
return;
- session = tty->session;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ session = get_pid(tty->session);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
tty_ldisc_flush(tty);
@@ -2927,6 +2933,7 @@
task_unlock(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
+ put_pid(session);
#endif
}
diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c
index f8ed50a..813be2c 100644
--- a/drivers/tty/tty_jobctrl.c
+++ b/drivers/tty/tty_jobctrl.c
@@ -103,8 +103,8 @@
put_pid(tty->session);
put_pid(tty->pgrp);
tty->pgrp = get_pid(task_pgrp(current));
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
tty->session = get_pid(task_session(current));
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
if (current->signal->tty) {
tty_debug(tty, "current tty %s not NULL!!\n",
current->signal->tty->name);
@@ -293,20 +293,23 @@
spin_lock_irq(¤t->sighand->siglock);
put_pid(current->signal->tty_old_pgrp);
current->signal->tty_old_pgrp = NULL;
-
tty = tty_kref_get(current->signal->tty);
+ spin_unlock_irq(¤t->sighand->siglock);
+
if (tty) {
unsigned long flags;
+
+ tty_lock(tty);
spin_lock_irqsave(&tty->ctrl_lock, flags);
put_pid(tty->session);
put_pid(tty->pgrp);
tty->session = NULL;
tty->pgrp = NULL;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty_unlock(tty);
tty_kref_put(tty);
}
- spin_unlock_irq(¤t->sighand->siglock);
/* Now clear signal->tty under the lock */
read_lock(&tasklist_lock);
session_clear_tty(task_session(current));
@@ -477,14 +480,19 @@
return -ENOTTY;
if (retval)
return retval;
- if (!current->signal->tty ||
- (current->signal->tty != real_tty) ||
- (real_tty->session != task_session(current)))
- return -ENOTTY;
+
if (get_user(pgrp_nr, p))
return -EFAULT;
if (pgrp_nr < 0)
return -EINVAL;
+
+ spin_lock_irq(&real_tty->ctrl_lock);
+ if (!current->signal->tty ||
+ (current->signal->tty != real_tty) ||
+ (real_tty->session != task_session(current))) {
+ retval = -ENOTTY;
+ goto out_unlock_ctrl;
+ }
rcu_read_lock();
pgrp = find_vpid(pgrp_nr);
retval = -ESRCH;
@@ -494,12 +502,12 @@
if (session_of_pgrp(pgrp) != task_session(current))
goto out_unlock;
retval = 0;
- spin_lock_irq(&tty->ctrl_lock);
put_pid(real_tty->pgrp);
real_tty->pgrp = get_pid(pgrp);
- spin_unlock_irq(&tty->ctrl_lock);
out_unlock:
rcu_read_unlock();
+out_unlock_ctrl:
+ spin_unlock_irq(&real_tty->ctrl_lock);
return retval;
}
@@ -511,20 +519,30 @@
*
* Obtain the session id of the tty. If there is no session
* return an error.
- *
- * Locking: none. Reference to current->signal->tty is safe.
*/
static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
+ unsigned long flags;
+ pid_t sid;
+
/*
* (tty == real_tty) is a cheap way of
* testing if the tty is NOT a master pty.
*/
if (tty == real_tty && current->signal->tty != real_tty)
return -ENOTTY;
+
+ spin_lock_irqsave(&real_tty->ctrl_lock, flags);
if (!real_tty->session)
- return -ENOTTY;
- return put_user(pid_vnr(real_tty->session), p);
+ goto err;
+ sid = pid_vnr(real_tty->session);
+ spin_unlock_irqrestore(&real_tty->ctrl_lock, flags);
+
+ return put_user(sid, p);
+
+err:
+ spin_unlock_irqrestore(&real_tty->ctrl_lock, flags);
+ return -ENOTTY;
}
/*
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 044c3cb..ea80bf8 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -52,10 +52,11 @@
}
}
-static const struct tty_port_client_operations default_client_ops = {
+const struct tty_port_client_operations tty_port_default_client_ops = {
.receive_buf = tty_port_default_receive_buf,
.write_wakeup = tty_port_default_wakeup,
};
+EXPORT_SYMBOL_GPL(tty_port_default_client_ops);
void tty_port_init(struct tty_port *port)
{
@@ -68,7 +69,7 @@
spin_lock_init(&port->lock);
port->close_delay = (50 * HZ) / 100;
port->closing_wait = (3000 * HZ) / 100;
- port->client_ops = &default_client_ops;
+ port->client_ops = &tty_port_default_client_ops;
kref_init(&port->kref);
}
EXPORT_SYMBOL(tty_port_init);
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index d2a1e12..9ffd42e 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -605,6 +605,7 @@
port->index = vcc_table_add(port);
if (port->index == -1) {
pr_err("VCC: no more TTY indices left for allocation\n");
+ rv = -ENOMEM;
goto free_ldc;
}
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index b28aa0d..251c02a 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -495,7 +495,7 @@
p2[unicode & 0x3f] = fontpos;
- p->sum += (fontpos << 20) + unicode;
+ p->sum += (fontpos << 20U) + unicode;
return 0;
}
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 515fc09..b6e78fd 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -127,7 +127,11 @@
static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */
static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */
static bool dead_key_next;
-static int npadch = -1; /* -1 or number assembled on pad */
+
+/* Handles a number being assembled on the number pad */
+static bool npadch_active;
+static unsigned int npadch_value;
+
static unsigned int diacr;
static char rep; /* flag telling character repeat */
@@ -738,8 +742,13 @@
return;
if ((unsigned)value < ARRAY_SIZE(func_table)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&func_buf_lock, flags);
if (func_table[value])
puts_queue(vc, func_table[value]);
+ spin_unlock_irqrestore(&func_buf_lock, flags);
+
} else
pr_err("k_fn called with value=%d\n", value);
}
@@ -845,12 +854,12 @@
shift_state &= ~(1 << value);
/* kludge */
- if (up_flag && shift_state != old_state && npadch != -1) {
+ if (up_flag && shift_state != old_state && npadch_active) {
if (kbd->kbdmode == VC_UNICODE)
- to_utf8(vc, npadch);
+ to_utf8(vc, npadch_value);
else
- put_queue(vc, npadch & 0xff);
- npadch = -1;
+ put_queue(vc, npadch_value & 0xff);
+ npadch_active = false;
}
}
@@ -868,7 +877,7 @@
static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag)
{
- int base;
+ unsigned int base;
if (up_flag)
return;
@@ -882,10 +891,12 @@
base = 16;
}
- if (npadch == -1)
- npadch = value;
- else
- npadch = npadch * base + value;
+ if (!npadch_active) {
+ npadch_value = 0;
+ npadch_active = true;
+ }
+
+ npadch_value = npadch_value * base + value;
}
static void k_lock(struct vc_data *vc, unsigned char value, char up_flag)
@@ -1491,7 +1502,7 @@
if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev))
kbd_rawcode(value);
- if (event_type == EV_KEY)
+ if (event_type == EV_KEY && event_code <= KEY_MAX)
kbd_keycode(event_code, value, HW_RAW(handle->dev));
spin_unlock(&kbd_event_lock);
@@ -1984,13 +1995,11 @@
#undef s
#undef v
-/* FIXME: This one needs untangling and locking */
+/* FIXME: This one needs untangling */
int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm)
{
struct kbsentry *kbs;
- char *p;
u_char *q;
- u_char __user *up;
int sz, fnw_sz;
int delta;
char *first_free, *fj, *fnw;
@@ -2016,23 +2025,19 @@
i = kbs->kb_func;
switch (cmd) {
- case KDGKBSENT:
- sz = sizeof(kbs->kb_string) - 1; /* sz should have been
- a struct member */
- up = user_kdgkb->kb_string;
- p = func_table[i];
- if(p)
- for ( ; *p && sz; p++, sz--)
- if (put_user(*p, up++)) {
- ret = -EFAULT;
- goto reterr;
- }
- if (put_user('\0', up)) {
- ret = -EFAULT;
- goto reterr;
- }
- kfree(kbs);
- return ((p && *p) ? -EOVERFLOW : 0);
+ case KDGKBSENT: {
+ /* size should have been a struct member */
+ ssize_t len = sizeof(user_kdgkb->kb_string);
+
+ spin_lock_irqsave(&func_buf_lock, flags);
+ len = strlcpy(kbs->kb_string, func_table[i] ? : "", len);
+ spin_unlock_irqrestore(&func_buf_lock, flags);
+
+ ret = copy_to_user(user_kdgkb->kb_string, kbs->kb_string,
+ len + 1) ? -EFAULT : 0;
+
+ goto reterr;
+ }
case KDSKBSENT:
if (!perm) {
ret = -EPERM;
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 78732fe..7556139 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -16,6 +16,7 @@
#include <linux/tty.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -29,6 +30,8 @@
#include <linux/console.h>
#include <linux/tty_flip.h>
+#include <linux/sched/signal.h>
+
/* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
#define isspace(c) ((c) == ' ')
@@ -43,6 +46,7 @@
static int sel_end;
static int sel_buffer_lth;
static char *sel_buffer;
+static DEFINE_MUTEX(sel_lock);
/* clear_selection, highlight and highlight_pointer can be called
from interrupt (via scrollback/front) */
@@ -84,6 +88,11 @@
}
EXPORT_SYMBOL_GPL(clear_selection);
+bool vc_is_sel(struct vc_data *vc)
+{
+ return vc == sel_cons;
+}
+
/*
* User settable table: what characters are to be considered alphabetic?
* 128 bits. Locked by the console lock.
@@ -177,14 +186,14 @@
return set_selection_kernel(&v, tty);
}
-int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
+static int __set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
{
struct vc_data *vc = vc_cons[fg_console].d;
int new_sel_start, new_sel_end, spc;
char *bp, *obp;
int i, ps, pe, multiplier;
u32 c;
- int mode;
+ int mode, ret = 0;
poke_blanked_console();
@@ -332,7 +341,21 @@
}
}
sel_buffer_lth = bp - sel_buffer;
- return 0;
+
+ return ret;
+}
+
+int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty)
+{
+ int ret;
+
+ mutex_lock(&sel_lock);
+ console_lock();
+ ret = __set_selection_kernel(v, tty);
+ console_unlock();
+ mutex_unlock(&sel_lock);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(set_selection_kernel);
@@ -350,6 +373,7 @@
unsigned int count;
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
+ int ret = 0;
console_lock();
poke_blanked_console();
@@ -361,10 +385,17 @@
tty_buffer_lock_exclusive(&vc->port);
add_wait_queue(&vc->paste_wait, &wait);
+ mutex_lock(&sel_lock);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ break;
+ }
if (tty_throttled(tty)) {
+ mutex_unlock(&sel_lock);
schedule();
+ mutex_lock(&sel_lock);
continue;
}
__set_current_state(TASK_RUNNING);
@@ -373,11 +404,12 @@
count);
pasted += count;
}
+ mutex_unlock(&sel_lock);
remove_wait_queue(&vc->paste_wait, &wait);
__set_current_state(TASK_RUNNING);
tty_buffer_unlock_exclusive(&vc->port);
tty_ldisc_deref(ld);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(paste_selection);
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index 1f04234..778f83e 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -456,6 +456,9 @@
size_t ret;
char *con_buf;
+ if (use_unicode(inode))
+ return -EOPNOTSUPP;
+
con_buf = (char *) __get_free_page(GFP_KERNEL);
if (!con_buf)
return -ENOMEM;
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 34aa39d..6f013d7 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -81,6 +81,7 @@
#include <linux/errno.h>
#include <linux/kd.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/console.h>
@@ -350,7 +351,7 @@
/* allocate everything in one go */
memsize = cols * rows * sizeof(char32_t);
memsize += rows * sizeof(char32_t *);
- p = kmalloc(memsize, GFP_KERNEL);
+ p = vmalloc(memsize);
if (!p)
return NULL;
@@ -364,9 +365,14 @@
return uniscr;
}
+static void vc_uniscr_free(struct uni_screen *uniscr)
+{
+ vfree(uniscr);
+}
+
static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr)
{
- kfree(vc->vc_uni_screen);
+ vc_uniscr_free(vc->vc_uni_screen);
vc->vc_uni_screen = new_uniscr;
}
@@ -890,8 +896,9 @@
static void hide_cursor(struct vc_data *vc)
{
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
+
vc->vc_sw->con_cursor(vc, CM_ERASE);
hide_softcursor(vc);
}
@@ -901,7 +908,7 @@
if (!con_is_fg(vc) || console_blanked || vc->vc_mode == KD_GRAPHICS)
return;
if (vc->vc_deccm) {
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
add_softcursor(vc);
if ((vc->vc_cursor_type & 0x0f) != 1)
@@ -936,10 +943,21 @@
WARN_CONSOLE_UNLOCKED();
set_origin(vc);
- if (vc->vc_sw->con_flush_scrollback)
+ if (vc->vc_sw->con_flush_scrollback) {
vc->vc_sw->con_flush_scrollback(vc);
- else
+ } else if (con_is_visible(vc)) {
+ /*
+ * When no con_flush_scrollback method is provided then the
+ * legacy way for flushing the scrollback buffer is to use
+ * a side effect of the con_switch method. We do it only on
+ * the foreground console as background consoles have no
+ * scrollback buffers in that case and we obviously don't
+ * want to switch to them.
+ */
+ hide_cursor(vc);
vc->vc_sw->con_switch(vc);
+ set_cursor(vc);
+ }
}
/*
@@ -1063,10 +1081,30 @@
module_put(vc->vc_sw->owner);
}
+static void vc_port_destruct(struct tty_port *port)
+{
+ struct vc_data *vc = container_of(port, struct vc_data, port);
+
+ kfree(vc);
+}
+
+static const struct tty_port_operations vc_port_ops = {
+ .destruct = vc_port_destruct,
+};
+
+/*
+ * Change # of rows and columns (0 means unchanged/the size of fg_console)
+ * [this is to be used together with some user program
+ * like resize that changes the hardware videomode]
+ */
+#define VC_MAXCOL (32767)
+#define VC_MAXROW (32767)
+
int vc_allocate(unsigned int currcons) /* return 0 on success */
{
struct vt_notifier_param param;
struct vc_data *vc;
+ int err;
WARN_CONSOLE_UNLOCKED();
@@ -1088,6 +1126,7 @@
vc_cons[currcons].d = vc;
tty_port_init(&vc->port);
+ vc->port.ops = &vc_port_ops;
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
visual_init(vc, currcons, 1);
@@ -1095,6 +1134,11 @@
if (!*vc->vc_uni_pagedir_loc)
con_set_default_unimap(vc);
+ err = -EINVAL;
+ if (vc->vc_cols > VC_MAXCOL || vc->vc_rows > VC_MAXROW ||
+ vc->vc_screenbuf_size > KMALLOC_MAX_SIZE || !vc->vc_screenbuf_size)
+ goto err_free;
+ err = -ENOMEM;
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf)
goto err_free;
@@ -1113,7 +1157,7 @@
visual_deinit(vc);
kfree(vc);
vc_cons[currcons].d = NULL;
- return -ENOMEM;
+ return err;
}
static inline int resize_screen(struct vc_data *vc, int width, int height,
@@ -1122,20 +1166,12 @@
/* Resizes the resolution of the display adapater */
int err = 0;
- if (vc->vc_mode != KD_GRAPHICS && vc->vc_sw->con_resize)
+ if (vc->vc_sw->con_resize)
err = vc->vc_sw->con_resize(vc, width, height, user);
return err;
}
-/*
- * Change # of rows and columns (0 means unchanged/the size of fg_console)
- * [this is to be used together with some user program
- * like resize that changes the hardware videomode]
- */
-#define VC_RESIZE_MAXCOL (32767)
-#define VC_RESIZE_MAXROW (32767)
-
/**
* vc_do_resize - resizing method for the tty
* @tty: tty being resized
@@ -1160,7 +1196,7 @@
unsigned int old_rows, old_row_size, first_copied_row;
unsigned int new_cols, new_rows, new_row_size, new_screen_size;
unsigned int user;
- unsigned short *newscreen;
+ unsigned short *oldscreen, *newscreen;
struct uni_screen *new_uniscr = NULL;
WARN_CONSOLE_UNLOCKED();
@@ -1171,7 +1207,7 @@
user = vc->vc_resize_user;
vc->vc_resize_user = 0;
- if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
+ if (cols > VC_MAXCOL || lines > VC_MAXROW)
return -EINVAL;
new_cols = (cols ? cols : vc->vc_cols);
@@ -1182,7 +1218,7 @@
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- if (new_screen_size > (4 << 20))
+ if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size)
return -EINVAL;
newscreen = kzalloc(new_screen_size, GFP_USER);
if (!newscreen)
@@ -1196,7 +1232,7 @@
}
}
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
old_rows = vc->vc_rows;
@@ -1205,7 +1241,7 @@
err = resize_screen(vc, new_cols, new_rows, user);
if (err) {
kfree(newscreen);
- kfree(new_uniscr);
+ vc_uniscr_free(new_uniscr);
return err;
}
@@ -1258,10 +1294,11 @@
if (new_scr_end > new_origin)
scr_memsetw((void *)new_origin, vc->vc_video_erase_char,
new_scr_end - new_origin);
- kfree(vc->vc_screenbuf);
+ oldscreen = vc->vc_screenbuf;
vc->vc_screenbuf = newscreen;
vc->vc_screenbuf_size = new_screen_size;
set_origin(vc);
+ kfree(oldscreen);
/* do part of a reset_terminal() */
vc->vc_top = 0;
@@ -1340,6 +1377,7 @@
atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m);
vcs_remove_sysfs(currcons);
visual_deinit(vc);
+ con_free_unimap(vc);
put_pid(vc->vt_pid);
vc_uniscr_set(vc, NULL);
kfree(vc->vc_screenbuf);
@@ -3035,10 +3073,8 @@
switch (type)
{
case TIOCL_SETSEL:
- console_lock();
ret = set_selection_user((struct tiocl_selection
__user *)(p+1), tty);
- console_unlock();
break;
case TIOCL_PASTESEL:
ret = paste_selection(tty);
@@ -3244,6 +3280,7 @@
tty->driver_data = vc;
vc->port.tty = tty;
+ tty_port_get(&vc->port);
if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
@@ -3279,6 +3316,13 @@
console_unlock();
}
+static void con_cleanup(struct tty_struct *tty)
+{
+ struct vc_data *vc = tty->driver_data;
+
+ tty_port_put(&vc->port);
+}
+
static int default_color = 7; /* white */
static int default_italic_color = 2; // green (ASCII)
static int default_underline_color = 3; // cyan (ASCII)
@@ -3360,6 +3404,7 @@
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
tty_port_init(&vc->port);
visual_init(vc, currcons, 1);
+ /* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
vc_init(vc, vc->vc_rows, vc->vc_cols,
currcons || !vc->vc_sw->con_save_screen);
@@ -3403,7 +3448,8 @@
.throttle = con_throttle,
.unthrottle = con_unthrottle,
.resize = vt_resize,
- .shutdown = con_shutdown
+ .shutdown = con_shutdown,
+ .cleanup = con_cleanup,
};
static struct cdev vc0_cdev;
@@ -4575,27 +4621,6 @@
return rc;
}
-static int con_font_copy(struct vc_data *vc, struct console_font_op *op)
-{
- int con = op->height;
- int rc;
-
-
- console_lock();
- if (vc->vc_mode != KD_TEXT)
- rc = -EINVAL;
- else if (!vc->vc_sw->con_font_copy)
- rc = -ENOSYS;
- else if (con < 0 || !vc_cons_allocated(con))
- rc = -ENOTTY;
- else if (con == vc->vc_num) /* nothing to do */
- rc = 0;
- else
- rc = vc->vc_sw->con_font_copy(vc, con);
- console_unlock();
- return rc;
-}
-
int con_font_op(struct vc_data *vc, struct console_font_op *op)
{
switch (op->op) {
@@ -4606,7 +4631,8 @@
case KD_FONT_OP_SET_DEFAULT:
return con_font_default(vc, op);
case KD_FONT_OP_COPY:
- return con_font_copy(vc, op);
+ /* was buggy and never really used */
+ return -EINVAL;
}
return -ENOSYS;
}
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 8b0ed13..167c727 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -39,11 +39,32 @@
#include <linux/kbd_diacr.h>
#include <linux/selection.h>
-char vt_dont_switch;
-extern struct tty_driver *console_driver;
+bool vt_dont_switch;
-#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+static inline bool vt_in_use(unsigned int i)
+{
+ const struct vc_data *vc = vc_cons[i].d;
+
+ /*
+ * console_lock must be held to prevent the vc from being deallocated
+ * while we're checking whether it's in-use.
+ */
+ WARN_CONSOLE_UNLOCKED();
+
+ return vc && kref_read(&vc->port.kref) > 1;
+}
+
+static inline bool vt_busy(int i)
+{
+ if (vt_in_use(i))
+ return true;
+ if (i == fg_console)
+ return true;
+ if (vc_is_sel(vc_cons[i].d))
+ return true;
+
+ return false;
+}
/*
* Console (vt and kd) routines, as defined by USL SVR4 manual, and by
@@ -223,7 +244,7 @@
static inline int
-do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
+do_fontx_ioctl(struct vc_data *vc, int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
{
struct consolefontdesc cfdarg;
int i;
@@ -241,15 +262,16 @@
op->height = cfdarg.charheight;
op->charcount = cfdarg.charcount;
op->data = cfdarg.chardata;
- return con_font_op(vc_cons[fg_console].d, op);
- case GIO_FONTX: {
+ return con_font_op(vc, op);
+
+ case GIO_FONTX:
op->op = KD_FONT_OP_GET;
op->flags = KD_FONT_FLAG_OLD;
op->width = 8;
op->height = cfdarg.charheight;
op->charcount = cfdarg.charcount;
op->data = cfdarg.chardata;
- i = con_font_op(vc_cons[fg_console].d, op);
+ i = con_font_op(vc, op);
if (i)
return i;
cfdarg.charheight = op->height;
@@ -257,7 +279,6 @@
if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc)))
return -EFAULT;
return 0;
- }
}
return -EINVAL;
}
@@ -289,16 +310,14 @@
int ret = 0;
console_lock();
- if (VT_BUSY(vc_num))
+ if (vt_busy(vc_num))
ret = -EBUSY;
else if (vc_num)
vc = vc_deallocate(vc_num);
console_unlock();
- if (vc && vc_num >= MIN_NR_CONSOLES) {
- tty_port_destroy(&vc->port);
- kfree(vc);
- }
+ if (vc && vc_num >= MIN_NR_CONSOLES)
+ tty_port_put(&vc->port);
return ret;
}
@@ -311,17 +330,15 @@
console_lock();
for (i = 1; i < MAX_NR_CONSOLES; i++)
- if (!VT_BUSY(i))
+ if (!vt_busy(i))
vc[i] = vc_deallocate(i);
else
vc[i] = NULL;
console_unlock();
for (i = 1; i < MAX_NR_CONSOLES; i++) {
- if (vc[i] && i >= MIN_NR_CONSOLES) {
- tty_port_destroy(&vc[i]->port);
- kfree(vc[i]);
- }
+ if (vc[i] && i >= MIN_NR_CONSOLES)
+ tty_port_put(&vc[i]->port);
}
}
@@ -335,22 +352,13 @@
{
struct vc_data *vc = tty->driver_data;
struct console_font_op op; /* used in multiple places here */
- unsigned int console;
+ unsigned int console = vc->vc_num;
unsigned char ucval;
unsigned int uival;
void __user *up = (void __user *)arg;
int i, perm;
int ret = 0;
- console = vc->vc_num;
-
-
- if (!vc_cons_allocated(console)) { /* impossible? */
- ret = -ENOIOCTLCMD;
- goto out;
- }
-
-
/*
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -476,16 +484,19 @@
ret = -EINVAL;
goto out;
}
- /* FIXME: this needs the console lock extending */
- if (vc->vc_mode == (unsigned char) arg)
+ console_lock();
+ if (vc->vc_mode == (unsigned char) arg) {
+ console_unlock();
break;
+ }
vc->vc_mode = (unsigned char) arg;
- if (console != fg_console)
+ if (console != fg_console) {
+ console_unlock();
break;
+ }
/*
* explicitly blank/unblank the screen if switching modes
*/
- console_lock();
if (arg == KD_TEXT)
do_unblank_screen(1);
else
@@ -641,15 +652,16 @@
struct vt_stat __user *vtstat = up;
unsigned short state, mask;
- /* Review: FIXME: Console lock ? */
if (put_user(fg_console + 1, &vtstat->v_active))
ret = -EFAULT;
else {
state = 1; /* /dev/tty0 is always open */
+ console_lock(); /* required by vt_in_use() */
for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
++i, mask <<= 1)
- if (VT_IS_IN_USE(i))
+ if (vt_in_use(i))
state |= mask;
+ console_unlock();
ret = put_user(state, &vtstat->v_state);
}
break;
@@ -659,10 +671,11 @@
* Returns the first available (non-opened) console.
*/
case VT_OPENQRY:
- /* FIXME: locking ? - but then this is a stupid API */
+ console_lock(); /* required by vt_in_use() */
for (i = 0; i < MAX_NR_CONSOLES; ++i)
- if (! VT_IS_IN_USE(i))
+ if (!vt_in_use(i))
break;
+ console_unlock();
uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
goto setint;
@@ -876,15 +889,30 @@
return -EINVAL;
for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ struct vc_data *vcp;
+
if (!vc_cons[i].d)
continue;
console_lock();
- if (v.v_vlin)
- vc_cons[i].d->vc_scan_lines = v.v_vlin;
- if (v.v_clin)
- vc_cons[i].d->vc_font.height = v.v_clin;
- vc_cons[i].d->vc_resize_user = 1;
- vc_resize(vc_cons[i].d, v.v_cols, v.v_rows);
+ vcp = vc_cons[i].d;
+ if (vcp) {
+ int ret;
+ int save_scan_lines = vcp->vc_scan_lines;
+ int save_cell_height = vcp->vc_cell_height;
+
+ if (v.v_vlin)
+ vcp->vc_scan_lines = v.v_vlin;
+ if (v.v_clin)
+ vcp->vc_cell_height = v.v_clin;
+ vcp->vc_resize_user = 1;
+ ret = vc_resize(vcp, v.v_cols, v.v_rows);
+ if (ret) {
+ vcp->vc_scan_lines = save_scan_lines;
+ vcp->vc_cell_height = save_cell_height;
+ console_unlock();
+ return ret;
+ }
+ }
console_unlock();
}
break;
@@ -899,7 +927,7 @@
op.height = 0;
op.charcount = 256;
op.data = up;
- ret = con_font_op(vc_cons[fg_console].d, &op);
+ ret = con_font_op(vc, &op);
break;
}
@@ -910,7 +938,7 @@
op.height = 32;
op.charcount = 256;
op.data = up;
- ret = con_font_op(vc_cons[fg_console].d, &op);
+ ret = con_font_op(vc, &op);
break;
}
@@ -927,7 +955,7 @@
case PIO_FONTX:
case GIO_FONTX:
- ret = do_fontx_ioctl(cmd, up, perm, &op);
+ ret = do_fontx_ioctl(vc, cmd, up, perm, &op);
break;
case PIO_FONTRESET:
@@ -944,11 +972,11 @@
{
op.op = KD_FONT_OP_SET_DEFAULT;
op.data = NULL;
- ret = con_font_op(vc_cons[fg_console].d, &op);
+ ret = con_font_op(vc, &op);
if (ret)
break;
console_lock();
- con_set_default_unimap(vc_cons[fg_console].d);
+ con_set_default_unimap(vc);
console_unlock();
break;
}
@@ -1006,12 +1034,12 @@
case VT_LOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
- vt_dont_switch = 1;
+ vt_dont_switch = true;
break;
case VT_UNLOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
- vt_dont_switch = 0;
+ vt_dont_switch = false;
break;
case VT_GETHIFONTMASK:
ret = put_user(vc->vc_hi_font_mask,
@@ -1075,8 +1103,9 @@
};
static inline int
-compat_fontx_ioctl(int cmd, struct compat_consolefontdesc __user *user_cfd,
- int perm, struct console_font_op *op)
+compat_fontx_ioctl(struct vc_data *vc, int cmd,
+ struct compat_consolefontdesc __user *user_cfd,
+ int perm, struct console_font_op *op)
{
struct compat_consolefontdesc cfdarg;
int i;
@@ -1094,7 +1123,8 @@
op->height = cfdarg.charheight;
op->charcount = cfdarg.charcount;
op->data = compat_ptr(cfdarg.chardata);
- return con_font_op(vc_cons[fg_console].d, op);
+ return con_font_op(vc, op);
+
case GIO_FONTX:
op->op = KD_FONT_OP_GET;
op->flags = KD_FONT_FLAG_OLD;
@@ -1102,7 +1132,7 @@
op->height = cfdarg.charheight;
op->charcount = cfdarg.charcount;
op->data = compat_ptr(cfdarg.chardata);
- i = con_font_op(vc_cons[fg_console].d, op);
+ i = con_font_op(vc, op);
if (i)
return i;
cfdarg.charheight = op->height;
@@ -1175,14 +1205,9 @@
{
struct vc_data *vc = tty->driver_data;
struct console_font_op op; /* used in multiple places here */
- unsigned int console = vc->vc_num;
void __user *up = compat_ptr(arg);
int perm;
-
- if (!vc_cons_allocated(console)) /* impossible? */
- return -ENOIOCTLCMD;
-
/*
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -1197,7 +1222,7 @@
*/
case PIO_FONTX:
case GIO_FONTX:
- return compat_fontx_ioctl(cmd, up, perm, &op);
+ return compat_fontx_ioctl(vc, cmd, up, perm, &op);
case KDFONTOP:
return compat_kdfontop_ioctl(up, perm, &op, vc);