bionic-amd64-mbed-tls-build/Dockerfile - ci/dockerfiles.git - TrustedFirmware Git Browser

 # ubuntu-18.04/Dockerfile
 #
 #  Copyright (c) 2018-2021, ARM Limited, All Rights Reserved
 #  SPDX-License-Identifier: Apache-2.0
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may
 #  not use this file except in compliance with the License.
 #  You may obtain a copy of the License at
 #
 #  http://www.apache.org/licenses/LICENSE-2.0
 #
 #  Unless required by applicable law or agreed to in writing, software
 #  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 #
 #  This file is part of Mbed TLS (https://www.trustedfirmware.org/projects/mbed-tls/)


 ################################################################
 #### Documentation
 ################################################################

 # Purpose
 # -------
 #
 # This docker file is for creating a ubuntu-18.04 platform container. It
 # contains setup and installation of tools for executing same set of Mbed TLS
 # tests as there are in the CI. This conatiner can be used for reproducing and
 # testing failures found in the CI.


 #Start with basic Ubuntu 18.04 image
 FROM ubuntu:18.04

 ENV DEBIAN_FRONTEND=noninteractive

 # Install necessary apt tools
 RUN apt-get update > /dev/null && \
     apt-get install -y apt-transport-https \
                        apt-utils \
                        software-properties-common > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 # set the working directory to /opt/slave
 WORKDIR /opt/slave

 # Pre-approve Oracle Java license
 RUN echo debconf shared/accepted-oracle-license-v1-1 select true | debconf-set-selections && \
     echo debconf shared/accepted-oracle-license-v1-1 seen true | debconf-set-selections

 # Install source control tools
 RUN apt-get update > /dev/null && \
     apt-get install -y git > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 # Install Python 2.7
 RUN apt-get update > /dev/null && \
     apt-get install -y python2.7 \
                        libffi-dev \
                        python-dev \
                        python-pip \
                        python-setuptools \
                        python-distutils-extra > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 # Install Python 3 pip
 RUN apt-get update > /dev/null && \
     apt-get install -y python3-pip > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 # Install build tools
 RUN apt-get update > /dev/null && \
     apt-get install -y cmake \
                        make \
                        valgrind \
                        doxygen \
                        graphviz \
                        lcov \
                        abi-dumper \
                        gcc-mingw-w64-i686 \
                        clang \
                        wget \
                        lsof > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 # Install ARM Compiler 5.06
 RUN dpkg --add-architecture i386 && \
     apt-get update > /dev/null && \
     apt-get install -y libc6-i386 \
                        libc6:i386 \
                        libstdc++6:i386 > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 RUN wget -q https://developer.arm.com/-/media/Files/downloads/compiler/DS500-PA-00003-r5p0-22rel0.tgz && \
     tar -zxf DS500-PA-00003-r5p0-22rel0.tgz && \
     ./Installer/setup.sh --i-agree-to-the-contained-eula --no-interactive -d /usr/local/ARM_Compiler_5.06u3 --quiet && \
     rm -rf DS500-PA-00003-r5p0-22rel0.tgz releasenotes.html Installer/

 ENV ARMC5_BIN_DIR=/usr/local/ARM_Compiler_5.06u3/bin/
 ENV PATH=$PATH:/usr/local/ARM_Compiler_5.06u3/bin
 ENV ARMLMD_LICENSE_FILE=27000@flexnet.trustedfirmware.org

 # Install ARM Compiler 6.6
 RUN mkdir temp && cd temp && \
     wget -q --no-check-certificate https://developer.arm.com/-/media/Files/downloads/compiler/DS500-BN-00026-r5p0-07rel0.tgz?revision=8f0d9fb0-9616-458c-b2f5-d0dac83ea93c?product=Downloads,64-bit,,Linux,6.6 -O arm6.tgz && \
     tar -zxf arm6.tgz  && ls -ltr && \
     ./install_x86_64.sh --i-agree-to-the-contained-eula --no-interactive -d /usr/local/ARM_Compiler_6.6 --quiet && \
     cd .. && rm -rf temp/

 ENV ARMC6_BIN_DIR=/usr/local/ARM_Compiler_6.6/bin/

 # Install arm-none-eabi-gcc
 RUN wget -q https://developer.arm.com/-/media/Files/downloads/gnu-rm/5_4-2016q3/gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 -O gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 && \
     tar -xjf gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 -C /opt

 ENV PATH=/opt/gcc-arm-none-eabi-5_4-2016q3/bin:$PATH

 # Install openssl 1.0.2g
 RUN apt-get update > /dev/null && \
     apt-get install -y gcc-multilib \
                        p11-kit \
                        libgmp10 \
                        libgmp-dev \
                        pkg-config \
                        m4 \
                        libp11-kit-dev > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 RUN wget -q https://www.openssl.org/source/old/1.0.2/openssl-1.0.2g.tar.gz && \
     tar -zxf openssl-1.0.2g.tar.gz && cd openssl-1.0.2g && \
     ./config --openssldir=/usr/local/openssl-1.0.2g && \
     make clean && make && make install && cd .. && \
     rm -rf openssl-1.0.2g*

 ENV OPENSSL=/usr/local/openssl-1.0.2g/bin/openssl
 ENV PATH=/usr/local/openssl-1.0.2g/bin:$PATH

 # Install openssl 1.0.1j for legacy testing
 RUN wget -q https://www.openssl.org/source/old/1.0.1/openssl-1.0.1j.tar.gz && \
     tar -zxf openssl-1.0.1j.tar.gz && cd openssl-1.0.1j && \
     ./config --openssldir=/usr/local/openssl-1.0.1j && \
     make clean && make && make install && cd .. && \
     rm -rf openssl-1.0.1j*

 ENV OPENSSL_LEGACY=/usr/local/openssl-1.0.1j/bin/openssl

 # Install openssl 1.1.1a for ARIA cipher testing
 RUN wget -q https://www.openssl.org/source/openssl-1.1.1a.tar.gz && \
     tar -zxf openssl-1.1.1a.tar.gz && cd openssl-1.1.1a && \
     ./config --prefix=/usr/local/openssl-1.1.1a -Wl,--enable-new-dtags,-rpath,'$(LIBRPATH)' && \
     make clean && make && make install && cd .. && \
     rm -rf openssl-1.1.1a*

 ENV OPENSSL_NEXT=/usr/local/openssl-1.1.1a/bin/openssl

 # Install Gnu TLS 3.4.10
 RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-3.1.tar.gz && \
     tar -zxf nettle-3.1.tar.gz && cd nettle-3.1 && \
     ./configure --prefix=/usr/local/libnettle-3.1 --exec_prefix=/usr/local/libnettle-3.1  --disable-shared && \
     make && make install && cd .. && rm -rf nettle-3.1*

 ENV PKG_CONFIG_PATH=/usr/local/libnettle-3.1/lib/pkgconfig:/usr/local/libnettle-3.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

 RUN wget -q https://ftp.gnu.org/gnu/libtasn1/libtasn1-4.13.tar.gz && \
     tar -zxf libtasn1-4.13.tar.gz && cd libtasn1-4.13 && \
     ./configure && make && make install && \
     cd .. && rm -rf libtasn1-4.13*

 RUN wget -q https://github.com/p11-glue/p11-kit/releases/download/0.23.10/p11-kit-0.23.10.tar.gz && \
     tar -zxf p11-kit-0.23.10.tar.gz && cd p11-kit-0.23.10 && \
     ./configure --prefix=/usr/local/libp11-kit-0.23.10 && make && make install && \
     cd .. && rm -rf p11-kit-0.23.10*

 ENV PKG_CONFIG_PATH=/usr/local/lib/libp11-kit-0.23.10/lib/pkgconfig:/usr/local/lib/libp11-kit-0.23.10/lib64/pkgconfig:$PKG_CONFIG_PATH

 RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.4/gnutls-3.4.10.tar.xz && \
     tar -xJf gnutls-3.4.10.tar.xz && cd gnutls-3.4.10 && \
     ./configure --prefix=/usr/local/gnutls-3.4.10 --exec_prefix=/usr/local/gnutls-3.4.10 --disable-shared && \
     make && make install && cat config.log && cd .. && \
     rm -rf gnutls-3.4.10*

 ENV GNUTLS_CLI=/usr/local/gnutls-3.4.10/bin/gnutls-cli
 ENV GNUTLS_SERV=/usr/local/gnutls-3.4.10/bin/gnutls-serv
 ENV PATH=/usr/local/gnutls-3.4.10/bin:$PATH

 # Install Gnu TLS 3.3.8 for legacy testing
 RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-2.7.1.tar.gz && \
     tar -zxf nettle-2.7.1.tar.gz && cd nettle-2.7.1 && \
     ./configure --prefix=/usr/local/libnettle-2.7.1 --exec_prefix=/usr/local/libnettle-2.7.1  --disable-shared && \
     make && make install && cd .. && rm -rf nettle-2.7.1*

 ENV PKG_CONFIG_PATH=/usr/local/libnettle-2.7.1/lib/pkgconfig:/usr/local/libnettle-2.7.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

 RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.3/gnutls-3.3.8.tar.xz && \
     tar -xJf gnutls-3.3.8.tar.xz && cd gnutls-3.3.8 && \
     ./configure --prefix=/usr/local/gnutls-3.3.8 --exec_prefix=/usr/local/gnutls-3.3.8 --disable-shared && \
     make && make install && cat config.log && cd .. && \
     rm -rf gnutls-3.3.8*

 ENV GNUTLS_LEGACY_CLI=/usr/local/gnutls-3.3.8/bin/gnutls-cli
 ENV GNUTLS_LEGACY_SERV=/usr/local/gnutls-3.3.8/bin/gnutls-serv

 # Instal GNU TLS 3.6.5 for broader interoperability testing
 RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-3.4.1.tar.gz && \
     tar -zxf nettle-3.4.1.tar.gz && cd nettle-3.4.1 && \
     ./configure --prefix=/usr/local/libnettle-3.4.1 --exec_prefix=/usr/local/libnettle-3.4.1  --disable-shared && \
     make && make install && cd .. && rm -rf nettle-3.4.1*

 ENV PKG_CONFIG_PATH=/usr/local/libnettle-3.4.1/lib/pkgconfig:/usr/local/libnettle-3.4.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

 RUN apt-get update > /dev/null && \
     apt-get install -y libunistring-dev > /dev/null && \
     apt-get clean && rm -rf /var/lib/apt/lists/

 RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.6/gnutls-3.6.5.tar.xz && \
     tar -xJf gnutls-3.6.5.tar.xz && cd gnutls-3.6.5 && \
     ./configure --prefix=/usr/local/gnutls-3.6.5 --exec_prefix=/usr/local/gnutls-3.6.5 --disable-shared && \
     make && make install && cat config.log && cd .. && \
     rm -rf gnutls-3.6.5*

 ENV GNUTLS_NEXT_CLI=/usr/local/gnutls-3.6.5/bin/gnutls-cli
 ENV GNUTLS_NEXT_SERV=/usr/local/gnutls-3.6.5/bin/gnutls-serv

 # Remove Ubuntu unattended-upgrades to prevent unwanted changes to system while it is running
 RUN apt-get purge -y unattended-upgrades


 # Install Python 2 pip packages
 # The pip wrapper scripts can get out of sync with pip due to upgrading it outside the package manager, so invoke the module directly
 RUN python2 -m pip install pip setuptools --upgrade > /dev/null

 RUN python2 -m pip install yotta matplotlib > /dev/null

 # Install Python pip packages
 #
 # The pip wrapper scripts can get out of sync with pip due to upgrading it
 # outside the package manager, so invoke the module directly.
 #
 # Ubuntu 18.04's pip (9.0.1) doesn't support suppressing the progress bar,
 # which is annoying in CI logs. Install pip<21, same as on Ubuntu 16.04
 # (although we could use a later version if we wanted).
 #
 # Piping to cat suppresses the progress bar, but means that a failure
 # won't be caught (`stuff | cat` succeeds if cat succeeds, even if `stuff`
 # fails). The subsequent use of "pip config" (which requires pip >=10)
 # will however fail if the installation of a more recent pip failed.
 RUN python3 -m pip install 'pip<21' --upgrade | cat && \
     python3 -m pip config set global.progress_bar off && \
     python3 -m pip install setuptools --upgrade && \
     # For pylint we want a known version, as later versions may add checks at
     # any time, making CI results unpredictable.
     python3 -m pip install pylint==2.4.4 && \
     # For mypy, use the earliest version that works with our code base.
     # See https://github.com/ARMmbed/mbedtls/pull/3953 .
     python3 -m pip install mypy==0.780 && \
     # For jinja2, use the version that's in Ubuntu 20.04.
     # See https://github.com/ARMmbed/mbedtls/pull/5067#discussion_r738794607 .
     # Note that Jinja2 3.0 drops support for Python 3.5, so we need 2.x.
     python3 -m pip install Jinja2==2.10.1 types-Jinja2 && \
     true

 # Set the locale
 RUN apt-get clean && apt-get update && apt-get install -y locales zip python-tk
 RUN locale-gen en_US.UTF-8

 # Set locale for ARMCC to work
 RUN locale && locale-gen "en_US.UTF-8" && dpkg-reconfigure locales

 # Add user
 RUN useradd -m user

 # Create workspace
 ARG AGENT_WORKDIR=/var/lib/builds
 RUN mkdir -p ${AGENT_WORKDIR} && chown user:user ${AGENT_WORKDIR}
 USER user
 ENV AGENT_WORKDIR=${AGENT_WORKDIR}

 WORKDIR ${AGENT_WORKDIR}

 ENTRYPOINT ["bash"]
	# ubuntu-18.04/Dockerfile
	#
	# Copyright (c) 2018-2021, ARM Limited, All Rights Reserved
	# SPDX-License-Identifier: Apache-2.0
	#
	# Licensed under the Apache License, Version 2.0 (the "License"); you may
	# not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
	# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	# This file is part of Mbed TLS (https://www.trustedfirmware.org/projects/mbed-tls/)



	################################################################
	#### Documentation
	################################################################

	# Purpose
	# -------
	#
	# This docker file is for creating a ubuntu-18.04 platform container. It
	# contains setup and installation of tools for executing same set of Mbed TLS
	# tests as there are in the CI. This conatiner can be used for reproducing and
	# testing failures found in the CI.


	#Start with basic Ubuntu 18.04 image
	FROM ubuntu:18.04

	ENV DEBIAN_FRONTEND=noninteractive

	# Install necessary apt tools
	RUN apt-get update > /dev/null && \
	apt-get install -y apt-transport-https \
	apt-utils \
	software-properties-common > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	# set the working directory to /opt/slave
	WORKDIR /opt/slave

	# Pre-approve Oracle Java license
	RUN echo debconf shared/accepted-oracle-license-v1-1 select true \| debconf-set-selections && \
	echo debconf shared/accepted-oracle-license-v1-1 seen true \| debconf-set-selections

	# Install source control tools
	RUN apt-get update > /dev/null && \
	apt-get install -y git > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	# Install Python 2.7
	RUN apt-get update > /dev/null && \
	apt-get install -y python2.7 \
	libffi-dev \
	python-dev \
	python-pip \
	python-setuptools \
	python-distutils-extra > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	# Install Python 3 pip
	RUN apt-get update > /dev/null && \
	apt-get install -y python3-pip > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	# Install build tools
	RUN apt-get update > /dev/null && \
	apt-get install -y cmake \
	make \
	valgrind \
	doxygen \
	graphviz \
	lcov \
	abi-dumper \
	gcc-mingw-w64-i686 \
	clang \
	wget \
	lsof > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	# Install ARM Compiler 5.06
	RUN dpkg --add-architecture i386 && \
	apt-get update > /dev/null && \
	apt-get install -y libc6-i386 \
	libc6:i386 \
	libstdc++6:i386 > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	RUN wget -q https://developer.arm.com/-/media/Files/downloads/compiler/DS500-PA-00003-r5p0-22rel0.tgz && \
	tar -zxf DS500-PA-00003-r5p0-22rel0.tgz && \
	./Installer/setup.sh --i-agree-to-the-contained-eula --no-interactive -d /usr/local/ARM_Compiler_5.06u3 --quiet && \
	rm -rf DS500-PA-00003-r5p0-22rel0.tgz releasenotes.html Installer/

	ENV ARMC5_BIN_DIR=/usr/local/ARM_Compiler_5.06u3/bin/
	ENV PATH=$PATH:/usr/local/ARM_Compiler_5.06u3/bin
	ENV ARMLMD_LICENSE_FILE=27000@flexnet.trustedfirmware.org

	# Install ARM Compiler 6.6
	RUN mkdir temp && cd temp && \
	wget -q --no-check-certificate https://developer.arm.com/-/media/Files/downloads/compiler/DS500-BN-00026-r5p0-07rel0.tgz?revision=8f0d9fb0-9616-458c-b2f5-d0dac83ea93c?product=Downloads,64-bit,,Linux,6.6 -O arm6.tgz && \
	tar -zxf arm6.tgz && ls -ltr && \
	./install_x86_64.sh --i-agree-to-the-contained-eula --no-interactive -d /usr/local/ARM_Compiler_6.6 --quiet && \
	cd .. && rm -rf temp/

	ENV ARMC6_BIN_DIR=/usr/local/ARM_Compiler_6.6/bin/

	# Install arm-none-eabi-gcc
	RUN wget -q https://developer.arm.com/-/media/Files/downloads/gnu-rm/5_4-2016q3/gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 -O gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 && \
	tar -xjf gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 -C /opt

	ENV PATH=/opt/gcc-arm-none-eabi-5_4-2016q3/bin:$PATH

	# Install openssl 1.0.2g
	RUN apt-get update > /dev/null && \
	apt-get install -y gcc-multilib \
	p11-kit \
	libgmp10 \
	libgmp-dev \
	pkg-config \
	m4 \
	libp11-kit-dev > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	RUN wget -q https://www.openssl.org/source/old/1.0.2/openssl-1.0.2g.tar.gz && \
	tar -zxf openssl-1.0.2g.tar.gz && cd openssl-1.0.2g && \
	./config --openssldir=/usr/local/openssl-1.0.2g && \
	make clean && make && make install && cd .. && \
	rm -rf openssl-1.0.2g*

	ENV OPENSSL=/usr/local/openssl-1.0.2g/bin/openssl
	ENV PATH=/usr/local/openssl-1.0.2g/bin:$PATH

	# Install openssl 1.0.1j for legacy testing
	RUN wget -q https://www.openssl.org/source/old/1.0.1/openssl-1.0.1j.tar.gz && \
	tar -zxf openssl-1.0.1j.tar.gz && cd openssl-1.0.1j && \
	./config --openssldir=/usr/local/openssl-1.0.1j && \
	make clean && make && make install && cd .. && \
	rm -rf openssl-1.0.1j*

	ENV OPENSSL_LEGACY=/usr/local/openssl-1.0.1j/bin/openssl

	# Install openssl 1.1.1a for ARIA cipher testing
	RUN wget -q https://www.openssl.org/source/openssl-1.1.1a.tar.gz && \
	tar -zxf openssl-1.1.1a.tar.gz && cd openssl-1.1.1a && \
	./config --prefix=/usr/local/openssl-1.1.1a -Wl,--enable-new-dtags,-rpath,'$(LIBRPATH)' && \
	make clean && make && make install && cd .. && \
	rm -rf openssl-1.1.1a*

	ENV OPENSSL_NEXT=/usr/local/openssl-1.1.1a/bin/openssl

	# Install Gnu TLS 3.4.10
	RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-3.1.tar.gz && \
	tar -zxf nettle-3.1.tar.gz && cd nettle-3.1 && \
	./configure --prefix=/usr/local/libnettle-3.1 --exec_prefix=/usr/local/libnettle-3.1 --disable-shared && \
	make && make install && cd .. && rm -rf nettle-3.1*

	ENV PKG_CONFIG_PATH=/usr/local/libnettle-3.1/lib/pkgconfig:/usr/local/libnettle-3.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

	RUN wget -q https://ftp.gnu.org/gnu/libtasn1/libtasn1-4.13.tar.gz && \
	tar -zxf libtasn1-4.13.tar.gz && cd libtasn1-4.13 && \
	./configure && make && make install && \
	cd .. && rm -rf libtasn1-4.13*

	RUN wget -q https://github.com/p11-glue/p11-kit/releases/download/0.23.10/p11-kit-0.23.10.tar.gz && \
	tar -zxf p11-kit-0.23.10.tar.gz && cd p11-kit-0.23.10 && \
	./configure --prefix=/usr/local/libp11-kit-0.23.10 && make && make install && \
	cd .. && rm -rf p11-kit-0.23.10*

	ENV PKG_CONFIG_PATH=/usr/local/lib/libp11-kit-0.23.10/lib/pkgconfig:/usr/local/lib/libp11-kit-0.23.10/lib64/pkgconfig:$PKG_CONFIG_PATH

	RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.4/gnutls-3.4.10.tar.xz && \
	tar -xJf gnutls-3.4.10.tar.xz && cd gnutls-3.4.10 && \
	./configure --prefix=/usr/local/gnutls-3.4.10 --exec_prefix=/usr/local/gnutls-3.4.10 --disable-shared && \
	make && make install && cat config.log && cd .. && \
	rm -rf gnutls-3.4.10*

	ENV GNUTLS_CLI=/usr/local/gnutls-3.4.10/bin/gnutls-cli
	ENV GNUTLS_SERV=/usr/local/gnutls-3.4.10/bin/gnutls-serv
	ENV PATH=/usr/local/gnutls-3.4.10/bin:$PATH

	# Install Gnu TLS 3.3.8 for legacy testing
	RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-2.7.1.tar.gz && \
	tar -zxf nettle-2.7.1.tar.gz && cd nettle-2.7.1 && \
	./configure --prefix=/usr/local/libnettle-2.7.1 --exec_prefix=/usr/local/libnettle-2.7.1 --disable-shared && \
	make && make install && cd .. && rm -rf nettle-2.7.1*

	ENV PKG_CONFIG_PATH=/usr/local/libnettle-2.7.1/lib/pkgconfig:/usr/local/libnettle-2.7.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

	RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.3/gnutls-3.3.8.tar.xz && \
	tar -xJf gnutls-3.3.8.tar.xz && cd gnutls-3.3.8 && \
	./configure --prefix=/usr/local/gnutls-3.3.8 --exec_prefix=/usr/local/gnutls-3.3.8 --disable-shared && \
	make && make install && cat config.log && cd .. && \
	rm -rf gnutls-3.3.8*

	ENV GNUTLS_LEGACY_CLI=/usr/local/gnutls-3.3.8/bin/gnutls-cli
	ENV GNUTLS_LEGACY_SERV=/usr/local/gnutls-3.3.8/bin/gnutls-serv

	# Instal GNU TLS 3.6.5 for broader interoperability testing
	RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-3.4.1.tar.gz && \
	tar -zxf nettle-3.4.1.tar.gz && cd nettle-3.4.1 && \
	./configure --prefix=/usr/local/libnettle-3.4.1 --exec_prefix=/usr/local/libnettle-3.4.1 --disable-shared && \
	make && make install && cd .. && rm -rf nettle-3.4.1*

	ENV PKG_CONFIG_PATH=/usr/local/libnettle-3.4.1/lib/pkgconfig:/usr/local/libnettle-3.4.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

	RUN apt-get update > /dev/null && \
	apt-get install -y libunistring-dev > /dev/null && \
	apt-get clean && rm -rf /var/lib/apt/lists/

	RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.6/gnutls-3.6.5.tar.xz && \
	tar -xJf gnutls-3.6.5.tar.xz && cd gnutls-3.6.5 && \
	./configure --prefix=/usr/local/gnutls-3.6.5 --exec_prefix=/usr/local/gnutls-3.6.5 --disable-shared && \
	make && make install && cat config.log && cd .. && \
	rm -rf gnutls-3.6.5*

	ENV GNUTLS_NEXT_CLI=/usr/local/gnutls-3.6.5/bin/gnutls-cli
	ENV GNUTLS_NEXT_SERV=/usr/local/gnutls-3.6.5/bin/gnutls-serv

	# Remove Ubuntu unattended-upgrades to prevent unwanted changes to system while it is running
	RUN apt-get purge -y unattended-upgrades


	# Install Python 2 pip packages
	# The pip wrapper scripts can get out of sync with pip due to upgrading it outside the package manager, so invoke the module directly
	RUN python2 -m pip install pip setuptools --upgrade > /dev/null

	RUN python2 -m pip install yotta matplotlib > /dev/null

	# Install Python pip packages
	#
	# The pip wrapper scripts can get out of sync with pip due to upgrading it
	# outside the package manager, so invoke the module directly.
	#
	# Ubuntu 18.04's pip (9.0.1) doesn't support suppressing the progress bar,
	# which is annoying in CI logs. Install pip<21, same as on Ubuntu 16.04
	# (although we could use a later version if we wanted).
	#
	# Piping to cat suppresses the progress bar, but means that a failure
	# won't be caught (`stuff \| cat` succeeds if cat succeeds, even if `stuff`
	# fails). The subsequent use of "pip config" (which requires pip >=10)
	# will however fail if the installation of a more recent pip failed.
	RUN python3 -m pip install 'pip<21' --upgrade \| cat && \
	python3 -m pip config set global.progress_bar off && \
	python3 -m pip install setuptools --upgrade && \
	# For pylint we want a known version, as later versions may add checks at
	# any time, making CI results unpredictable.
	python3 -m pip install pylint==2.4.4 && \
	# For mypy, use the earliest version that works with our code base.
	# See https://github.com/ARMmbed/mbedtls/pull/3953 .
	python3 -m pip install mypy==0.780 && \
	# For jinja2, use the version that's in Ubuntu 20.04.
	# See https://github.com/ARMmbed/mbedtls/pull/5067#discussion_r738794607 .
	# Note that Jinja2 3.0 drops support for Python 3.5, so we need 2.x.
	python3 -m pip install Jinja2==2.10.1 types-Jinja2 && \
	true

	# Set the locale
	RUN apt-get clean && apt-get update && apt-get install -y locales zip python-tk
	RUN locale-gen en_US.UTF-8

	# Set locale for ARMCC to work
	RUN locale && locale-gen "en_US.UTF-8" && dpkg-reconfigure locales

	# Add user
	RUN useradd -m user

	# Create workspace
	ARG AGENT_WORKDIR=/var/lib/builds
	RUN mkdir -p ${AGENT_WORKDIR} && chown user:user ${AGENT_WORKDIR}
	USER user
	ENV AGENT_WORKDIR=${AGENT_WORKDIR}

	WORKDIR ${AGENT_WORKDIR}

	ENTRYPOINT ["bash"]