docs/getting_started/tfm_sw_requirement.rst - TF-M/trusted-firmware-m - TrustedFirmware Git Browser

 #####################
 Software requirements
 #####################

 .. |KEIL_VERSION| replace:: v5.25.2
 .. |DEV_STUDIO_VERSION| replace:: 2019.1

 A quick reference table is included in the
 :ref:`docs/getting_started/tfm_sw_requirement:Tool & Dependency overview` section
 of this document.

 ****************************
 Supported build environments
 ****************************

 TF-M officially supports a limited set of build environments and setups. In
 this context, official support means that the environments listed below
 are actively used by team members and active developers, hence users should
 be able to recreate the same configurations by following the instructions
 described below. In case of problems, the TF-M team provides support
 only for these environments, but building in other environments can still be
 possible.

 The following environments are supported:

     - Ubuntu 18.04 x64
     - Windows 10 x64

 ***********
 C compilers
 ***********

 To compile TF-M code, at least one of the supported compiler toolchains have to
 be available in the build environment. The currently supported compiler
 versions are:

     - Arm Compiler v6.10.1+
     - GNU Arm compiler v7.3.1+
     - IAR Arm compiler v8.42.x, v8.50.x

 .. Note::
     - The Arm compilers above are provided via Keil uVision |KEIL_VERSION|
       or greater and Arm Development Studio
       |DEV_STUDIO_VERSION| or greater, or they can be downloaded as standalone
       packages from
       `here <https://developer.arm.com/products/software-development-tools/compilers/arm-compiler/downloads/version-6>`__.

     - The GNU Arm compiler can be downloaded from
       `here <https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads>`__.
       On the page select *GNU Arm Embedded Toolchain: 7-2018-q2-update* or an
       above version.

     - GNU Arm compiler version *10-2020-q4-major* has an issue in CMSE support.
       The bug is reported in `here <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99157>`__.
       Select other GNU Arm compiler versions instead.

     - The IAR Arm compilers above are provided via IAR Embedded Workbench (Windows) or
       IAR build tools for linux.
       For information, see
       `here <https://www.iar.com/iar-embedded-workbench/#!?architecture=Arm>`__ or
       `here <https://www.iar.com/iar-embedded-workbench/build-tools-for-linux/>`__.

 *****
 CMake
 *****

 The build-system is CMake based and supports the version 3.15 or higher.

     - Please use the latest build version available.
     - Recent versions of CMake can be downloaded from
       https://cmake.org/download/, and older releases are available from
       https://cmake.org/files.

 CMake handles all external dependencies, but if you wish to alter this
 behaviour, see :ref:`docs/technical_references/instructions/tfm_build_instruction:Manual
 dependency management`

 ********
 GNU make
 ********

 TF-M project builds using the "Unix Makefiles" generator of CMake
 and thus GNU make is needed for the build.

     - On Linux please use the version available in your distribution.
     - On Windows, GNU make v3.81 or higher shall work fine.

 CMake generators other than "Unix Makefiles" may work too, but are not
 officially supported. You may have a good luck with Ninja.

 ********************************************
 Tools for configuring and programming boards
 ********************************************

 Please follow a board secific documentation for building and programming
 tools.

 **************
 Typical setups
 **************

 This section lists steps to set-up TF-M build environment under Linux and Windows.
 Please also check the `Exceptions and special cases`_  chapter for any special
 requirements depending on the tools you are using.

 The build system can generate two documents: The Reference Manual and the
 User Guide. Both documents can be generated in HTML and PDF format.

 .. Note::
     Support for document generation in the build environment is not mandatory.
     Missing document generation tools will not block building the
     TF-M firmware.

 Ubuntu
 ======

 Setup needed tools for Ubuntu
 -----------------------------

 Tools required to build sources:

     - Arm DS |DEV_STUDIO_VERSION| (Arm DS Ultimate Edition)
       or GNU Arm compiler v7.3.1+
     - Git tools v2.10.0
     - CMake (see the `CMake`_ chapter)
     - GNU Make (see the `GNU make`_ chapter)
     - `SRecord v1.58 <http://srecord.sourceforge.net/download.html/>`__
       (for Musca test chip boards)
     - Python3 and the pip package manager (from Python 3.4 it's included)
     - Python3 packages as listed in tools/requirements.txt file

 Tools required to generate documentation:

     - Doxygen v1.8.0 or later - for reference manual
     - Graphviz dot v2.38.0 or later
     - PlantUML v1.2018.11 or later
     - Java runtime environment 1.8 or later (for running PlantUML)
     - LaTeX - for PDF generation only
     - PdfLaTeX - for PDF generation only
     - Python3 packages as listed in tools/requirements.txt - for user manual

 Download and install the required tools:

 .. code-block:: bash

     sudo apt-get update
     sudo apt-get install -y git curl wget build-essential libssl-dev python3 \
     python3-pip doxygen graphviz default-jre doxygen-latex
     mkdir ~/plantuml
     curl -L http://sourceforge.net/projects/plantuml/files/plantuml.jar/download --output ~/plantuml/plantuml.jar

 Clone the TF-M Sources
 (see :ref:`Getting the source-code`),
 then

 .. code-block:: bash

     pip3 install --upgrade pip
     cd trusted-firmware-m
     pip3 install -r tools/requirements.txt

 Finally, install C compiler (see `C compilers`_), CMake (see `CMake`_)
 and SRecord as required.

 Setup environment variables for Ubuntu
 --------------------------------------

 To import CMake in your bash shell console:

 .. code-block:: bash

     export PATH=<CMake path>/bin:$PATH

 To import Arm Compiler v6.13 in your bash shell console:

 .. code-block:: bash

     export PATH=<ARM_DS_PATH>/sw/ARMCompiler6.13/bin:$PATH
     export ARM_TOOL_VARIANT=ult
     export ARM_PRODUCT_PATH=<ARM_DS_PATH>/sw/mappings
     export ARMLMD_LICENSE_FILE=<LICENSE_FILE_PATH>

 To import GNU Arm in your bash shell console:

 .. code-block:: bash

     export PATH=<bash path>/bin:$PATH

 To import IAR Arm compiler in your bash shell console:

 .. code-block:: bash

     export PATH=<IAR compiler path>/bin:$PATH

 To import PLATUML:

 .. code-block:: bash

     export PLANTUML_JAR_PATH=~/plantuml/plantuml.jar

 Windows
 =======

 Setup needed tools for Windows
 ------------------------------

 Tools required to build sources:

     - uVision |KEIL_VERSION| or Arm DS |DEV_STUDIO_VERSION| (Arm DS Ultimate Edition)
       or GNU Arm compiler v7.3.1+
     - Git client latest version (https://git-scm.com/download/win)
     - CMake (`native Windows version <https://cmake.org/download/>`__,
       see the `CMake`_ chapter)
     - GNU make (http://gnuwin32.sourceforge.net/packages/make.htm)
     - `SRecord v1.63 <https://sourceforge.net/projects/srecord/>`__ (for Musca test
       chip boards)
     - Python3 `(native Windows version) <https://www.python.org/downloads/>`__ and
       the pip package manager (from Python 3.4 it's included)
     - Python3 packages as listed in tools/requirements.txt file

 Tools required to generate documentation:

     - `Doxygen v1.8.0
       <https://sourceforge.net/projects/doxygen/files/snapshots/doxygen-1.8-svn/
       windows/doxygenw20140924_1_8_8.zip/download>`__
       or later - for reference manual
     - `Graphviz dot v2.38.0
       <https://graphviz.gitlab.io/_pages/Download/windows/graphviz-2.38.msi>`__
       or later
     - `PlantUML v1.2018.11
       <http://sourceforge.net/projects/plantuml/files/plantuml.jar/download>`__
       or later
     - The Java runtime 1.8 or later (for running PlantUML) is part of the Arm DS
       installation or can be downloaded from
       `here <https://www.java.com/en/download/>`__
     - LaTeX - for PDF generation only
     - PdfLaTeX - for PDF generation only
     - `MikTeX <https://miktex.org/download>`__ - for PDF generation only
     - Python3 packages as listed in tools/requirements.txt - for user manual

 Download and install the required tools from above.

 Clone the TF-M Sources
 (see :ref:`Getting the source-code`),
 then

 .. code-block:: bash

     cd trusted-firmware-m
     pip install -r tools\requirements.txt

 Finally, install C compiler (see `C compilers`_), CMake (see `CMake`_)
 and SRecord as required.

 Setup environment variables for Windows
 ---------------------------------------
 Set the environment variables, assuming that:

     - CMake, doxygen, dot, and MikTeX binaries are available on the PATH.
     - Java JVM is used from Arm DS installation.
     - plantuml.jar is available at c:\\plantuml\\plantuml.jar

 To import CMake to your PATH variable:

 .. code-block:: bash

     set PATH=<CMake_Path>\bin;$PATH

 To import PLATUML:

 .. code-block:: bash

     set PLANTUML_JAR_PATH=<plantuml_Path>\plantuml.jar

 To set PATH for ARMDS:

 .. code-block:: bash

     set PATH=$PATH;<ARM_DS_PATH>\sw\java\bin

 There are several configurations depending on a toolset you are using.
 The typical cases are listed below.

 Armclang + Arm DS

 .. code-block:: bash

     set PATH=<ARM_DS_PATH>\sw\ARMCompiler6.13\bin;$PATH
     set ARM_PRODUCT_PATH=<ARM_DS_PATH>\sw\mappings
     set ARM_TOOL_VARIANT=ult
     set ARMLMD_LICENSE_FILE=<LICENSE_FILE_PATH>

 Armclang + Keil MDK Arm

 .. code-block:: bash

     set PATH=<uVision path>\ARM\ARMCLANG\bin;$PATH

 GNU Arm

 .. code-block:: bash

     set PATH=<GNU Arm path>\bin;$PATH

 ****************************
 Exceptions and special cases
 ****************************

 ArmClang
 ========
     - Arm compiler specific environment variable may need updating based on
       specific products and licenses as explained in
       `product-and-toolkit-configuration <https://developer.arm.com/products/software-development-tools/license-management/resources/product-and-toolkit-configuration>`__.

 MikTeX
 ======
     - When building the documentation the first time, MikTeX might prompt for
       installing missing LaTeX components. Please allow the MikTeX package
       manager to set-up these.

 **************************
 Tool & Dependency overview
 **************************

 To build the TF-M firmware the following tools are needed:

 .. csv-table:: Tool dependencies
    :header: "Name", "Version", "Component"

    "C compiler",See `C compilers`_,"Firmware"
    "CMake",See `CMake`_,
    "GNU Make",See `GNU make`_,
    "tf-m-tests",`CMake`_ handles it,
    "mbed-crypto",`CMake`_ handles it,
    "MCUboot",`CMake`_ handles it,
    "Python",3.x,"Firmware, User Guide"
    "yaml",,"Firmware"
    "pyasn1",,"Firmware"
    "jinja2",,"Firmware"
    "cryptography",,"Firmware"
    "cbor",,"Firmware"
    "click",,"Firmware"
    "imgtool",,"Firmware"
    "Doxygen",">1.8","Reference manual"
    "Sphinx","=1.7.9","User Guide"
    "sphinxcontrib-plantuml",,"User Guide"
    "sphinxcontrib-svg2pdfconverter",,"User Guide"
    "sphinx-rtd-theme",,"User Guide"
    "sphinx-tabs",,"User Guide"
    "Git",,
    "PlantUML",">v1.2018.11","Reference Manual, User Guide"
    "Graphviz dot",">v2.38.0","Reference manual"
    "Java runtime environment (JRE)",">1.8","Reference Manual, User Guide"
    "LaTex",,"pdf version of Reference Manual and User Guide"
    "PdfLaTex",,"pdf version of Reference Manual and User Guide"

 Dependency chain:

 .. uml::

    @startuml
     skinparam state {
       BackgroundColor #92AEE0
       FontColor black
       FontSize 16
       AttributeFontColor black
       AttributeFontSize 16
       BackgroundColor<<pdf>> #A293E2
       BackgroundColor<<doc>> #90DED6
     }
     state fw as "Firmware" : TF-M binary
     state c_comp as "C Compiler" : C99
     state gmake as "GNU make"
     state u_guide as "User Guide" <<doc>>
     state refman as "Reference Manual" <<doc>>
     state rtd_theme as "sphinx-rtd-theme" <<doc>>
     state tabs as "sphinx-tabs" <<doc>>
     state sphnix_puml as "sphinxcontrib-plantuml" <<doc>>
     state sphnix_svg as "sphinxcontrib-svg2pdfconverter" <<doc>>
     state JRE as "JRE" <<doc>> : Java Runtime Environment
     state gwiz as "Graphwiz dot" <<doc>>
     state Sphinx as "Sphinx" <<doc>>
     state m2r as "m2r" <<doc>>
     state PlantUML as "PlantUML" <<doc>>
     state LaTex as "LaTex" <<pdf>>
     state PdfLaTex as "PdfLaTex" <<<<pdf>>>>
     state Doxygen as "Doxygen" <<doc>>

     [*] --> fw
     fw --> c_comp
     fw --> CMake
     CMake --> gmake
     fw --> cryptography
     fw --> pyasn1
     fw --> yaml
     fw --> jinja2
     fw --> cbor
     fw --> click
     fw --> imgtool
     cryptography --> Python3
     pyasn1 --> Python3
     yaml --> Python3
     jinja2 --> Python3
     cbor --> Python3
     click --> Python3
     imgtool --> Python3

     [*] --> u_guide
     u_guide --> Sphinx
     Sphinx --> m2r
     Sphinx --> rtd_theme
     Sphinx --> tabs
     Sphinx --> sphnix_puml
     Sphinx --> sphnix_svg
     m2r --> Python3
     rtd_theme --> Python3
     tabs --> Python3
     sphnix_puml --> Python3
     sphnix_svg --> Python3
     Sphinx --> PlantUML
     PlantUML --> JRE
     PlantUML --> gwiz
     Sphinx --> LaTex
     LaTex --> PdfLaTex

     [*] --> refman
     refman --> Doxygen
     Doxygen --> PlantUML
     Doxygen --> LaTex
     state Legend {
       state x as "For PDF generation only" <<pdf>>
       state y as "For document generation only" <<doc>>
       state z as "Mandatory"
     }

    @enduml

 --------------

 *Copyright (c) 2017-2021, Arm Limited. All rights reserved.*
	#####################
	Software requirements
	#####################

	.. \|KEIL_VERSION\| replace:: v5.25.2
	.. \|DEV_STUDIO_VERSION\| replace:: 2019.1

	A quick reference table is included in the
	:ref:`docs/getting_started/tfm_sw_requirement:Tool & Dependency overview` section
	of this document.

	****************************
	Supported build environments
	****************************

	TF-M officially supports a limited set of build environments and setups. In
	this context, official support means that the environments listed below
	are actively used by team members and active developers, hence users should
	be able to recreate the same configurations by following the instructions
	described below. In case of problems, the TF-M team provides support
	only for these environments, but building in other environments can still be
	possible.

	The following environments are supported:

	- Ubuntu 18.04 x64
	- Windows 10 x64

	***********
	C compilers
	***********

	To compile TF-M code, at least one of the supported compiler toolchains have to
	be available in the build environment. The currently supported compiler
	versions are:

	- Arm Compiler v6.10.1+
	- GNU Arm compiler v7.3.1+
	- IAR Arm compiler v8.42.x, v8.50.x

	.. Note::
	- The Arm compilers above are provided via Keil uVision \|KEIL_VERSION\|
	or greater and Arm Development Studio
	\|DEV_STUDIO_VERSION\| or greater, or they can be downloaded as standalone
	packages from
	`here <https://developer.arm.com/products/software-development-tools/compilers/arm-compiler/downloads/version-6>`__.

	- The GNU Arm compiler can be downloaded from
	`here <https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads>`__.
	On the page select GNU Arm Embedded Toolchain: 7-2018-q2-update or an
	above version.

	- GNU Arm compiler version 10-2020-q4-major has an issue in CMSE support.
	The bug is reported in `here <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99157>`__.
	Select other GNU Arm compiler versions instead.

	- The IAR Arm compilers above are provided via IAR Embedded Workbench (Windows) or
	IAR build tools for linux.
	For information, see
	`here <https://www.iar.com/iar-embedded-workbench/#!?architecture=Arm>`__ or
	`here <https://www.iar.com/iar-embedded-workbench/build-tools-for-linux/>`__.

	*****
	CMake
	*****

	The build-system is CMake based and supports the version 3.15 or higher.

	- Please use the latest build version available.
	- Recent versions of CMake can be downloaded from
	https://cmake.org/download/, and older releases are available from
	https://cmake.org/files.

	CMake handles all external dependencies, but if you wish to alter this
	behaviour, see :ref:`docs/technical_references/instructions/tfm_build_instruction:Manual
	dependency management`

	********
	GNU make
	********

	TF-M project builds using the "Unix Makefiles" generator of CMake
	and thus GNU make is needed for the build.

	- On Linux please use the version available in your distribution.
	- On Windows, GNU make v3.81 or higher shall work fine.

	CMake generators other than "Unix Makefiles" may work too, but are not
	officially supported. You may have a good luck with Ninja.

	********************************************
	Tools for configuring and programming boards
	********************************************

	Please follow a board secific documentation for building and programming
	tools.

	**************
	Typical setups
	**************

	This section lists steps to set-up TF-M build environment under Linux and Windows.
	Please also check the `Exceptions and special cases`_ chapter for any special
	requirements depending on the tools you are using.

	The build system can generate two documents: The Reference Manual and the
	User Guide. Both documents can be generated in HTML and PDF format.

	.. Note::
	Support for document generation in the build environment is not mandatory.
	Missing document generation tools will not block building the
	TF-M firmware.

	Ubuntu
	======

	Setup needed tools for Ubuntu
	-----------------------------

	Tools required to build sources:

	- Arm DS \|DEV_STUDIO_VERSION\| (Arm DS Ultimate Edition)
	or GNU Arm compiler v7.3.1+
	- Git tools v2.10.0
	- CMake (see the `CMake`_ chapter)
	- GNU Make (see the `GNU make`_ chapter)
	- `SRecord v1.58 <http://srecord.sourceforge.net/download.html/>`__
	(for Musca test chip boards)
	- Python3 and the pip package manager (from Python 3.4 it's included)
	- Python3 packages as listed in tools/requirements.txt file

	Tools required to generate documentation:

	- Doxygen v1.8.0 or later - for reference manual
	- Graphviz dot v2.38.0 or later
	- PlantUML v1.2018.11 or later
	- Java runtime environment 1.8 or later (for running PlantUML)
	- LaTeX - for PDF generation only
	- PdfLaTeX - for PDF generation only
	- Python3 packages as listed in tools/requirements.txt - for user manual

	Download and install the required tools:

	.. code-block:: bash

	sudo apt-get update
	sudo apt-get install -y git curl wget build-essential libssl-dev python3 \
	python3-pip doxygen graphviz default-jre doxygen-latex
	mkdir ~/plantuml
	curl -L http://sourceforge.net/projects/plantuml/files/plantuml.jar/download --output ~/plantuml/plantuml.jar

	Clone the TF-M Sources
	(see :ref:`Getting the source-code`),
	then

	.. code-block:: bash

	pip3 install --upgrade pip
	cd trusted-firmware-m
	pip3 install -r tools/requirements.txt

	Finally, install C compiler (see `C compilers`_), CMake (see `CMake`_)
	and SRecord as required.

	Setup environment variables for Ubuntu
	--------------------------------------

	To import CMake in your bash shell console:

	.. code-block:: bash

	export PATH=<CMake path>/bin:$PATH

	To import Arm Compiler v6.13 in your bash shell console:

	.. code-block:: bash

	export PATH=<ARM_DS_PATH>/sw/ARMCompiler6.13/bin:$PATH
	export ARM_TOOL_VARIANT=ult
	export ARM_PRODUCT_PATH=<ARM_DS_PATH>/sw/mappings
	export ARMLMD_LICENSE_FILE=<LICENSE_FILE_PATH>

	To import GNU Arm in your bash shell console:

	.. code-block:: bash

	export PATH=<bash path>/bin:$PATH

	To import IAR Arm compiler in your bash shell console:

	.. code-block:: bash

	export PATH=<IAR compiler path>/bin:$PATH

	To import PLATUML:

	.. code-block:: bash

	export PLANTUML_JAR_PATH=~/plantuml/plantuml.jar

	Windows
	=======

	Setup needed tools for Windows
	------------------------------

	Tools required to build sources:

	- uVision \|KEIL_VERSION\| or Arm DS \|DEV_STUDIO_VERSION\| (Arm DS Ultimate Edition)
	or GNU Arm compiler v7.3.1+
	- Git client latest version (https://git-scm.com/download/win)
	- CMake (`native Windows version <https://cmake.org/download/>`__,
	see the `CMake`_ chapter)
	- GNU make (http://gnuwin32.sourceforge.net/packages/make.htm)
	- `SRecord v1.63 <https://sourceforge.net/projects/srecord/>`__ (for Musca test
	chip boards)
	- Python3 `(native Windows version) <https://www.python.org/downloads/>`__ and
	the pip package manager (from Python 3.4 it's included)
	- Python3 packages as listed in tools/requirements.txt file

	Tools required to generate documentation:

	- `Doxygen v1.8.0
	<https://sourceforge.net/projects/doxygen/files/snapshots/doxygen-1.8-svn/
	windows/doxygenw20140924_1_8_8.zip/download>`__
	or later - for reference manual
	- `Graphviz dot v2.38.0
	<https://graphviz.gitlab.io/_pages/Download/windows/graphviz-2.38.msi>`__
	or later
	- `PlantUML v1.2018.11
	<http://sourceforge.net/projects/plantuml/files/plantuml.jar/download>`__
	or later
	- The Java runtime 1.8 or later (for running PlantUML) is part of the Arm DS
	installation or can be downloaded from
	`here <https://www.java.com/en/download/>`__
	- LaTeX - for PDF generation only
	- PdfLaTeX - for PDF generation only
	- `MikTeX <https://miktex.org/download>`__ - for PDF generation only
	- Python3 packages as listed in tools/requirements.txt - for user manual

	Download and install the required tools from above.

	Clone the TF-M Sources
	(see :ref:`Getting the source-code`),
	then

	.. code-block:: bash

	cd trusted-firmware-m
	pip install -r tools\requirements.txt

	Finally, install C compiler (see `C compilers`_), CMake (see `CMake`_)
	and SRecord as required.

	Setup environment variables for Windows
	---------------------------------------
	Set the environment variables, assuming that:

	- CMake, doxygen, dot, and MikTeX binaries are available on the PATH.
	- Java JVM is used from Arm DS installation.
	- plantuml.jar is available at c:\\plantuml\\plantuml.jar

	To import CMake to your PATH variable:

	.. code-block:: bash

	set PATH=<CMake_Path>\bin;$PATH

	To import PLATUML:

	.. code-block:: bash

	set PLANTUML_JAR_PATH=<plantuml_Path>\plantuml.jar

	To set PATH for ARMDS:

	.. code-block:: bash

	set PATH=$PATH;<ARM_DS_PATH>\sw\java\bin

	There are several configurations depending on a toolset you are using.
	The typical cases are listed below.

	Armclang + Arm DS

	.. code-block:: bash

	set PATH=<ARM_DS_PATH>\sw\ARMCompiler6.13\bin;$PATH
	set ARM_PRODUCT_PATH=<ARM_DS_PATH>\sw\mappings
	set ARM_TOOL_VARIANT=ult
	set ARMLMD_LICENSE_FILE=<LICENSE_FILE_PATH>

	Armclang + Keil MDK Arm

	.. code-block:: bash

	set PATH=<uVision path>\ARM\ARMCLANG\bin;$PATH

	GNU Arm

	.. code-block:: bash

	set PATH=<GNU Arm path>\bin;$PATH

	****************************
	Exceptions and special cases
	****************************

	ArmClang
	========
	- Arm compiler specific environment variable may need updating based on
	specific products and licenses as explained in
	`product-and-toolkit-configuration <https://developer.arm.com/products/software-development-tools/license-management/resources/product-and-toolkit-configuration>`__.

	MikTeX
	======
	- When building the documentation the first time, MikTeX might prompt for
	installing missing LaTeX components. Please allow the MikTeX package
	manager to set-up these.

	**************************
	Tool & Dependency overview
	**************************

	To build the TF-M firmware the following tools are needed:

	.. csv-table:: Tool dependencies
	:header: "Name", "Version", "Component"

	"C compiler",See `C compilers`_,"Firmware"
	"CMake",See `CMake`_,
	"GNU Make",See `GNU make`_,
	"tf-m-tests",`CMake`_ handles it,
	"mbed-crypto",`CMake`_ handles it,
	"MCUboot",`CMake`_ handles it,
	"Python",3.x,"Firmware, User Guide"
	"yaml",,"Firmware"
	"pyasn1",,"Firmware"
	"jinja2",,"Firmware"
	"cryptography",,"Firmware"
	"cbor",,"Firmware"
	"click",,"Firmware"
	"imgtool",,"Firmware"
	"Doxygen",">1.8","Reference manual"
	"Sphinx","=1.7.9","User Guide"
	"sphinxcontrib-plantuml",,"User Guide"
	"sphinxcontrib-svg2pdfconverter",,"User Guide"
	"sphinx-rtd-theme",,"User Guide"
	"sphinx-tabs",,"User Guide"
	"Git",,
	"PlantUML",">v1.2018.11","Reference Manual, User Guide"
	"Graphviz dot",">v2.38.0","Reference manual"
	"Java runtime environment (JRE)",">1.8","Reference Manual, User Guide"
	"LaTex",,"pdf version of Reference Manual and User Guide"
	"PdfLaTex",,"pdf version of Reference Manual and User Guide"

	Dependency chain:

	.. uml::

	@startuml
	skinparam state {
	BackgroundColor #92AEE0
	FontColor black
	FontSize 16
	AttributeFontColor black
	AttributeFontSize 16
	BackgroundColor<<pdf>> #A293E2
	BackgroundColor<<doc>> #90DED6
	}
	state fw as "Firmware" : TF-M binary
	state c_comp as "C Compiler" : C99
	state gmake as "GNU make"
	state u_guide as "User Guide" <<doc>>
	state refman as "Reference Manual" <<doc>>
	state rtd_theme as "sphinx-rtd-theme" <<doc>>
	state tabs as "sphinx-tabs" <<doc>>
	state sphnix_puml as "sphinxcontrib-plantuml" <<doc>>
	state sphnix_svg as "sphinxcontrib-svg2pdfconverter" <<doc>>
	state JRE as "JRE" <<doc>> : Java Runtime Environment
	state gwiz as "Graphwiz dot" <<doc>>
	state Sphinx as "Sphinx" <<doc>>
	state m2r as "m2r" <<doc>>
	state PlantUML as "PlantUML" <<doc>>
	state LaTex as "LaTex" <<pdf>>
	state PdfLaTex as "PdfLaTex" <<<<pdf>>>>
	state Doxygen as "Doxygen" <<doc>>

	[*] --> fw
	fw --> c_comp
	fw --> CMake
	CMake --> gmake
	fw --> cryptography
	fw --> pyasn1
	fw --> yaml
	fw --> jinja2
	fw --> cbor
	fw --> click
	fw --> imgtool
	cryptography --> Python3
	pyasn1 --> Python3
	yaml --> Python3
	jinja2 --> Python3
	cbor --> Python3
	click --> Python3
	imgtool --> Python3

	[*] --> u_guide
	u_guide --> Sphinx
	Sphinx --> m2r
	Sphinx --> rtd_theme
	Sphinx --> tabs
	Sphinx --> sphnix_puml
	Sphinx --> sphnix_svg
	m2r --> Python3
	rtd_theme --> Python3
	tabs --> Python3
	sphnix_puml --> Python3
	sphnix_svg --> Python3
	Sphinx --> PlantUML
	PlantUML --> JRE
	PlantUML --> gwiz
	Sphinx --> LaTex
	LaTex --> PdfLaTex

	[*] --> refman
	refman --> Doxygen
	Doxygen --> PlantUML
	Doxygen --> LaTex
	state Legend {
	state x as "For PDF generation only" <<pdf>>
	state y as "For document generation only" <<doc>>
	state z as "Mandatory"
	}

	@enduml

	--------------

	Copyright (c) 2017-2021, Arm Limited. All rights reserved.