secure_fw/spm/include/tfm_arch.h

/*
 * Copyright (c) 2018-2022, Arm Limited. All rights reserved.
 * Copyright (c) 2022 Cypress Semiconductor Corporation (an Infineon
 * company) or an affiliate of Cypress Semiconductor Corporation. All rights
 * reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
 */
#ifndef __TFM_ARCH_H__
#define __TFM_ARCH_H__

/* This header file collects the architecture related operations. */

#include <stddef.h>
#include <inttypes.h>
#include "fih.h"
#include "tfm_hal_device_header.h"
#include "cmsis_compiler.h"

#if defined(__ARM_ARCH_8_1M_MAIN__) || \
    defined(__ARM_ARCH_8M_MAIN__)  || defined(__ARM_ARCH_8M_BASE__)
#include "tfm_arch_v8m.h"
#elif defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_7M__) || \
      defined(__ARM_ARCH_7EM__)
#include "tfm_arch_v6m_v7m.h"
#else
#error "Unsupported ARM Architecture."
#endif

#define SCHEDULER_LOCKED    1
#define SCHEDULER_UNLOCKED  0

#define XPSR_T32            0x01000000

/* Define IRQ level */
#if defined(__ARM_ARCH_8_1M_MAIN__) || defined(__ARM_ARCH_8M_MAIN__)
#define SecureFault_IRQnLVL      (0)
#define MemoryManagement_IRQnLVL (0)
#define BusFault_IRQnLVL         (0)
#define SVCall_IRQnLVL           (0)
#elif defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__)
#define MemoryManagement_IRQnLVL (0)
#define BusFault_IRQnLVL         (0)
#define SVCall_IRQnLVL           (0)
#elif defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_8M_BASE__)
#define SVCall_IRQnLVL           (0)
#else
#error "Unsupported ARM Architecture."
#endif


/* The lowest secure interrupt priority */
#ifdef CONFIG_TFM_USE_TRUSTZONE
/* IMPORTANT NOTE:
 *
 * Although the priority of the secure PendSV must be the lowest possible
 * among other interrupts in the Secure state, it must be ensured that
 * PendSV is not preempted nor masked by Non-Secure interrupts to ensure
 * the integrity of the Secure operation.
 * When AIRCR.PRIS is set, the Non-Secure execution can act on
 * FAULTMASK_NS, PRIMASK_NS or BASEPRI_NS register to boost its priority
 * number up to the value 0x80.
 * For this reason, set the priority of the PendSV interrupt to the next
 * priority level configurable on the platform, just below 0x80.
 */
#define PENDSV_PRIO_FOR_SCHED ((1 << (__NVIC_PRIO_BITS - 1)) - 1)
#else
/* If TZ is not in use, we have the full priority range available */
#define PENDSV_PRIO_FOR_SCHED ((1 << __NVIC_PRIO_BITS) - 1)
#endif

/* State context defined by architecture */
struct tfm_state_context_t {
    uint32_t    r0;
    uint32_t    r1;
    uint32_t    r2;
    uint32_t    r3;
    uint32_t    r12;
    uint32_t    lr;
    uint32_t    ra;
    uint32_t    xpsr;
};

/* Context addition to state context */
struct tfm_additional_context_t {
    uint32_t    callee[8];     /* R4-R11. NOT ORDERED!! */
};

/* Full thread context */
struct full_context_t {
    struct tfm_additional_context_t addi_ctx;
    struct tfm_state_context_t      stat_ctx;
};

/*
 * Under cross call ABI, SPM can be preempted by interrupts, the interrupt
 * handling can set SPM API return value and makes the initial SPM API
 * return code invalid. Use one flag to indicate if the return code has been
 * force updated by interrupts, then SPM return code can be discarded as it
 * is out of date.
 */
#define CROSS_RETCODE_EMPTY         0xEEEEEEED
#define CROSS_RETCODE_UPDATED       0xEEEEEEEE

/* Context control.
 * CAUTION: Assembly references this structure. DO CHECK the below functions
 * before changing the structure:
       'PendSV_Handler'
 */
struct context_ctrl_t {
    uint32_t                sp;           /* Stack pointer (higher address).
                                           * THIS MUST BE THE FIRST MEMBER OF
                                           * THE STRUCT.
                                           */
    uint32_t                exc_ret;      /* EXC_RETURN pattern.
                                           * THIS MUST BE THE SECOND MEMBER OF
                                           * THE STRUCT.
                                           */
    uint32_t                sp_limit;     /* Stack limit (lower address)     */
    uint32_t                sp_base;      /* Stack usage start (higher addr) */
    uint32_t                cross_frame;  /* Cross call frame position.      */
    uint32_t                retcode_status; /* Cross call retcode status.    */
};

/*
 * The context on MSP when de-privileged FLIH Function calls SVC to return.
 * It is the same when de-privileged FLIH Function is ready to run.
 */
struct context_flih_ret_t {
    uint64_t stack_seal;    /* Two words stack seal */
    struct tfm_additional_context_t addi_ctx;
    uint32_t psp;       /* PSP when interrupt exception ocurrs              */
    uint32_t psplim;    /* PSPLIM when interrupt exception ocurrs when      */
    struct tfm_state_context_t state_ctx; /* ctx on SVC_PREPARE_DEPRIV_FLIH */
};

/* A customized ABI format. */
struct cross_call_abi_frame_t {
    uint32_t      a0;
    uint32_t      a1;
    uint32_t      a2;
    uint32_t      a3;
    uint32_t      unused0;
    uint32_t      unused1;
};

/* Assign stack and stack limit to the context control instance. */
#define ARCH_CTXCTRL_INIT(x, buf, sz) do {                                   \
            (x)->sp             = ((uint32_t)(buf) + (uint32_t)(sz)) & ~0x7; \
            (x)->sp_limit       = ((uint32_t)(buf) + 7) & ~0x7;              \
            (x)->sp_base        = (x)->sp;                                   \
            (x)->exc_ret        = 0;                                         \
            (x)->cross_frame    = 0;                                         \
            (x)->retcode_status = CROSS_RETCODE_EMPTY;                       \
        } while (0)

/* Allocate 'size' bytes in stack. */
#define ARCH_CTXCTRL_ALLOCATE_STACK(x, size)                                 \
            ((x)->sp             -= ((size) + 7) & ~0x7)

/* The last allocated pointer. */
#define ARCH_CTXCTRL_ALLOCATED_PTR(x)         ((x)->sp)

/* Prepare a exception return pattern on the stack. */
#define ARCH_CTXCTRL_EXCRET_PATTERN(x, param, pfn, pfnlr) do {            \
            (x)->r0 = (uint32_t)(param);                                  \
            (x)->ra = (uint32_t)(pfn);                                    \
            (x)->lr = (uint32_t)(pfnlr);                                  \
            (x)->xpsr = XPSR_T32;                                         \
        } while (0)

/*
 * Claim a statically initialized context control instance.
 * Make the start stack pointer at 'stack_buf[stack_size]' because
 * the hardware acts in a 'Decrease-then-store' behaviour.
 */
#define ARCH_CLAIM_CTXCTRL_INSTANCE(name, stack_buf, stack_size)          \
            struct context_ctrl_t name = {                                \
                .sp        = (uint32_t)&stack_buf[stack_size],            \
                .sp_base   = (uint32_t)&stack_buf[stack_size],            \
                .sp_limit  = (uint32_t)stack_buf,                         \
                .exc_ret   = 0,                                           \
            }

/**
 * \brief Get Link Register
 * \details Returns the value of the Link Register (LR)
 * \return LR value
 */
#if !defined ( __ICCARM__ )
__attribute__ ((always_inline)) __STATIC_INLINE uint32_t __get_LR(void)
{
    register uint32_t result;

    __ASM volatile ("MOV %0, LR\n" : "=r" (result));
    return result;
}
#endif

__STATIC_INLINE uint32_t __save_disable_irq(void)
{
    uint32_t result;

    __ASM volatile ("mrs %0, primask \n cpsid i" : "=r" (result) :: "memory");
    return result;
}

__STATIC_INLINE void __restore_irq(uint32_t status)
{
    __ASM volatile ("msr primask, %0" :: "r" (status) : "memory");
}

__attribute__ ((always_inline))
__STATIC_INLINE uint32_t __get_active_exc_num(void)
{
    IPSR_Type IPSR;

    /* if non-zero, exception is active. NOT banked S/NS */
    IPSR.w = __get_IPSR();
    return IPSR.b.ISR;
}

__attribute__ ((always_inline))
__STATIC_INLINE void __set_CONTROL_SPSEL(uint32_t SPSEL)
{
    CONTROL_Type ctrl;

    ctrl.w = __get_CONTROL();
    ctrl.b.SPSEL = SPSEL;
    __set_CONTROL(ctrl.w);
    __ISB();
}


/**
 * \brief Whether in privileged level
 *
 * \retval true             If current execution runs in privileged level.
 * \retval false            If current execution runs in unprivileged level.
 */
__STATIC_INLINE bool tfm_arch_is_priv(void)
{
    CONTROL_Type ctrl;

    /* If in Handler mode */
    if (__get_IPSR()) {
        return true;
    }

    /* If in privileged Thread mode */
    ctrl.w = __get_CONTROL();
    if (!ctrl.b.nPRIV) {
        return true;
    }

    return false;
}

#if (CONFIG_TFM_FLOAT_ABI >= 1) && CONFIG_TFM_LAZY_STACKING
#define ARCH_FLUSH_FP_CONTEXT()  __asm volatile("vmov  s0, s0 \n":::"memory")
#else
#define ARCH_FLUSH_FP_CONTEXT()
#endif

/* Set secure exceptions priority. */
void tfm_arch_set_secure_exception_priorities(void);

#ifdef TFM_FIH_PROFILE_ON
/* Check secure exception priority */
FIH_RET_TYPE(int32_t) tfm_arch_verify_secure_exception_priorities(void);
#endif

/* Configure various extensions. */
void tfm_arch_config_extensions(void);

#if (CONFIG_TFM_FLOAT_ABI > 0)
/* Clear float point data. */
void tfm_arch_clear_fp_data(void);
#endif

/*
 * This function is called after SPM has initialized.
 * It frees the stack used by SPM initialization and do Exception Return.
 * It does not return.
 */
void tfm_arch_free_msp_and_exc_ret(uint32_t msp_base, uint32_t exc_return);

/*
 * This function sets return value on APIs that cause scheduling, for example
 * psa_wait(), by manipulating the control context - this is usaully setting the
 * R0 register of the thread context.
 */
void tfm_arch_set_context_ret_code(void *p_ctx_ctrl, uint32_t ret_code);

/* Init a thread context on thread stack and update the control context. */
void tfm_arch_init_context(void *p_ctx_ctrl,
                           uintptr_t pfn, void *param, uintptr_t pfnlr);

/*
 * Refresh the HW (sp, splimit) according to the given control context and
 * returns the EXC_RETURN payload (caller might need it for following codes).
 *
 * The p_ctx_ctrl must have been initialized by 'tfm_arch_init_context'.
 */
uint32_t tfm_arch_refresh_hardware_context(void *p_ctx_ctrl);

/*
 * Triggers scheduler. A return type is assigned in case
 * SPM returns values by the context.
 */
uint32_t tfm_arch_trigger_pendsv(void);

/*
 * Switch to a new stack area, lock scheduler and call function.
 * If 'stk_base' is ZERO, stack won't be switched and re-use caller stack.
 */
void arch_non_preempt_call(uintptr_t fn_addr, uintptr_t frame_addr,
                           uint32_t stk_base, uint32_t stk_limit);

#endif