diff --git a/include/drivers/st/bsec.h b/include/drivers/st/bsec.h
index 60dcf3c..4a1517a 100644
--- a/include/drivers/st/bsec.h
+++ b/include/drivers/st/bsec.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2017-2024, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -13,13 +13,6 @@
 #include <lib/utils_def.h>
 
 /*
- * IP configuration
- */
-#define BSEC_OTP_MASK			GENMASK(4, 0)
-#define BSEC_OTP_BANK_SHIFT		5
-#define BSEC_TIMEOUT_VALUE		0xFFFF
-
-/*
  * Return status
  */
 #define BSEC_OK				0U
@@ -32,98 +25,49 @@
 #define BSEC_RETRY			0xFFFFFFF8U
 #define BSEC_NOT_SUPPORTED		0xFFFFFFF7U
 #define BSEC_WRITE_LOCKED		0xFFFFFFF6U
-#define BSEC_ERROR_INVALID_FVR		0xFFFFFFF5U
 
 /*
- * OTP MODE
+ * get BSEC global state: result for bsec_get_secure_state()
+ * @state: global state
+ *           [1:0] BSEC state
+ *             00b: Sec Open
+ *             01b: Sec Closed
+ *             11b: Invalid
+ *           [8]: Hardware Key set = 1b
  */
-#define BSEC_MODE_OPEN1			0x00U
-#define BSEC_MODE_SECURED		0x01U
-#define BSEC_MODE_OPEN2			0x02U
-#define BSEC_MODE_INVALID		0x04U
-
-/*
- * OTP Lock services definition.
- * Value must corresponding to the bit number in the register.
- * Special case: (bit number << 1) for BSEC3.
- */
-#define BSEC_LOCK_UPPER_OTP		0x00
-#define BSEC_LOCK_GWLOCK		0x01
-#define BSEC_LOCK_DEBUG			0x02
-#define BSEC_LOCK_PROGRAM		0x03
-#define BSEC_LOCK_KVLOCK		0x04
-
-/*
- * Values for struct bsec_config::freq
- */
-#define FREQ_10_20_MHZ			0x0
-#define FREQ_20_30_MHZ			0x1
-#define FREQ_30_45_MHZ			0x2
-#define FREQ_45_67_MHZ			0x3
-
-/*
- * Device info structure, providing device-specific functions and a means of
- * adding driver-specific state.
- */
-struct bsec_config {
-	uint8_t den_lock;	/*
-				 * Debug enable sticky lock
-				 * 1 debug enable is locked until next reset
-				 */
-
-	/*  BSEC2 only */
-	uint8_t tread;		/* SAFMEM Reading current level default 0 */
-	uint8_t pulse_width;	/* SAFMEM Programming pulse width default 1 */
-	uint8_t freq;		/*
-				 * SAFMEM CLOCK see freq value define
-				 * default FREQ_45_67_MHZ
-				 */
-	uint8_t power;		/* Power up SAFMEM. 1 power up, 0 power off */
-	uint8_t prog_lock;	/*
-				 * Programming Sticky lock
-				 * 1 programming is locked until next reset
-				 */
-	uint8_t upper_otp_lock;	/*
-				 * Shadowing of upper OTP sticky lock
-				 * 1 shadowing of upper OTP is locked
-				 * until next reset
-				 */
-};
+#define BSEC_STATE_SEC_OPEN		U(0x0)
+#define BSEC_STATE_SEC_CLOSED		U(0x1)
+#define BSEC_STATE_INVALID		U(0x3)
+#define BSEC_STATE_MASK			GENMASK_32(1, 0)
 
 uint32_t bsec_probe(void);
-uint32_t bsec_get_base(void);
 
-uint32_t bsec_set_config(struct bsec_config *cfg);
-uint32_t bsec_get_config(struct bsec_config *cfg);
-
-uint32_t bsec_shadow_register(uint32_t otp);
 uint32_t bsec_read_otp(uint32_t *val, uint32_t otp);
+uint32_t bsec_shadow_read_otp(uint32_t *val, uint32_t otp);
 uint32_t bsec_write_otp(uint32_t val, uint32_t otp);
 uint32_t bsec_program_otp(uint32_t val, uint32_t otp);
-uint32_t bsec_permanent_lock_otp(uint32_t otp);
 
-void bsec_write_debug_conf(uint32_t val);
 uint32_t bsec_read_debug_conf(void);
 
 void bsec_write_scratch(uint32_t val);
-uint32_t bsec_read_scratch(void);
 
-uint32_t bsec_get_status(void);
-uint32_t bsec_get_hw_conf(void);
-uint32_t bsec_get_version(void);
-uint32_t bsec_get_id(void);
-uint32_t bsec_get_magic_id(void);
-
+/* Sticky lock support */
 uint32_t bsec_set_sr_lock(uint32_t otp);
 uint32_t bsec_read_sr_lock(uint32_t otp, bool *value);
 uint32_t bsec_set_sw_lock(uint32_t otp);
 uint32_t bsec_read_sw_lock(uint32_t otp, bool *value);
 uint32_t bsec_set_sp_lock(uint32_t otp);
 uint32_t bsec_read_sp_lock(uint32_t otp, bool *value);
-uint32_t bsec_read_permanent_lock(uint32_t otp, bool *value);
-uint32_t bsec_otp_lock(uint32_t service);
 
-uint32_t bsec_shadow_read_otp(uint32_t *otp_value, uint32_t word);
+uint32_t bsec_get_secure_state(void);
+static inline bool bsec_mode_is_closed_device(void)
+{
+	return (bsec_get_secure_state() & BSEC_STATE_MASK) == BSEC_STATE_SEC_CLOSED;
+}
+
+#if defined(IMAGE_BL32)
+uint32_t bsec_permanent_lock_otp(uint32_t otp);
 uint32_t bsec_check_nsec_access_rights(uint32_t otp);
+#endif
 
 #endif /* BSEC_H */