diff --git a/docs/about/index.rst b/docs/about/index.rst
index 06973ef..7cf2a68 100644
--- a/docs/about/index.rst
+++ b/docs/about/index.rst
@@ -7,6 +7,7 @@
 
    features
    release-information
+   lts
    maintainers
    contact
    acknowledgements
diff --git a/docs/about/lts.rst b/docs/about/lts.rst
new file mode 100644
index 0000000..91d3d40
--- /dev/null
+++ b/docs/about/lts.rst
@@ -0,0 +1,329 @@
+LTS - Long-Term Support
+=======================
+
+.. table:: Table 1: Document History
+
+  +-------------+--------------------+-------------------------------------------------------+
+  | Date        | Author             | Description                                           |
+  +=============+====================+=======================================================+
+  | 2022-07-20  | Okash Khawaja,     | Initial draft.                                        |
+  |             | Varun Wadekar      |                                                       |
+  +-------------+--------------------+-------------------------------------------------------+
+  | 2022-07-21  | Varun Wadekar      | Refine the Maintainership guidelines and planning     |
+  |             |                    | sections. Introduce a new section documenting a day   |
+  |             |                    | in the life of a LTS branch maintainer                |
+  +-------------+--------------------+-------------------------------------------------------+
+  | 2022-08-05  | Okash Khawaja,     | Merge two drafts (draft 1 and 2), address comments    |
+  |             | Varun Wadekar      | made by both authors, cosmetic changes to the content |
+  |             |                    | all over the document                                 |
+  +-------------+--------------------+-------------------------------------------------------+
+  | 2022-08-05  | Okash Khawaja      | Add note about testing support available from TF.org  |
+  +-------------+--------------------+-------------------------------------------------------+
+  | 2022-08-05  | Varun Wadekar      | Changed the “Future plans” section to “FAQ” and       |
+  |             |                    | answered some of the questions with feedback from     |
+  |             |                    | the community.                                        |
+  +-------------+--------------------+-------------------------------------------------------+
+  |2025-01-07   | Govindraj Raja     | Convert from pdf to rst.                              |
+  +-------------+--------------------+-------------------------------------------------------+
+
+This document proposes a plan for long-term support (LTS) of the |TF-A| project.
+
+Why is LTS required?
+--------------------
+LTS is needed for commercial reasons. More specifically, on the device side,
+when a product is released, the companies have to support that in-market product
+such that the amount of changes to the firmware are kept to a minimum to avoid
+the risk of regression. At the same time the companies don't want to exclude
+critical patches such as those for security advisories. Similarly on the server side,
+companies want to minimize the churn when deploying fixes during incident
+response, e.g. due to critical security bugs.
+
+This means that those companies have to maintain and backport critical updates to
+old branches internally. As this effort is duplicated across different companies
+using TF-A, it makes sense to factor out this effort into a community-wide LTS.
+
+What does LTS mean for TF-A?
+----------------------------
+In this section we will define exactly what constitutes LTS for TF-A.
+Specifically, we will define the following characteristics:
+
+- criteria for selecting patches which will be backported to LTS branches
+- lifetime and frequency of LTS branches
+
+**Criteria**
+
+We must have an objective criterion for selecting patches to be backported to
+LTS branches. This will make maintenance easy because:
+
+a. there will be less -- ideally no -- discussion when selecting patches to backport
+b. large parts of the process can be automated
+
+Below is the criteria
+
+#. No features will be backported.
+#. Security advisories: Any patch that makes it into :ref:`Security Advisories`
+   is automatically selected for back porting. This includes patches to external
+   components too, e.g. libfdt.
+#. Workarounds for CPU and other ARM IP errata
+#. Workarounds for non-ARM IP errata, e.g. TI UART
+#. Fixes for platform bugs. These patches must not modify any code outside of
+   the specific platform that the fix applies to.
+#. Patches can only be backported from the master branch. In other words, the
+   master branch will be a superset of all the changes in any LTS branch.
+
+**Lifetime and frequency**
+
+This section approaches three questions: for how long should an LTS release be
+supported, how frequently should LTS releases be made and at which time(s) of
+the year should the releases be made.
+
+1. For how long should an LTS release be supported?
+
+Linux kernel supports an LTS branch for 5 years. Since firmware tends to
+have less churn and longer lifetime than HLOS, TF-A should support at least
+5 years for its LTS. We should leave the room open for discussions about
+extending it to 7 years.
+
+2. How frequently should LTS releases be made?
+
+Given that many products that have a release cycle, have a yearly release
+cycle, it would make sense to have yearly TF-A releases.
+
+3. Which time(s) of the year should the releases be made?
+
+TF-A releases are cut twice a year: May and November. Basing LTS release
+on the November TF-A release has a few benefits. First, it aligns with Linux
+LTS releases which happen towards the end of each year. Second, it aligns
+with Android releases which tend to fall in Q3 each year. Since product
+releases are timed with Android release, this gives enough time to harden
+the TF-A LTS release during development so that it's ready for launch in
+Q3 following year. On the other hand, if the May release of TF-A is chosen as
+the basis for LTS then developers will have little time -- about a month,
+taking into account the test-and-debug phase before LTS is cut (see below) --
+before Android release.
+
+To summarize, there will be one LTS release per year. It will be supported for
+5 years and we can discuss extending it to 7 years later on. The LTS release
+will be based on the November release of TF-A.
+
+**Testing Criteria**
+
+Every patch merged to the LTS branch will complete the following tests before
+getting approved.
+
+#. TFTF tests currently running in the testing farm
+#. CI/CD static analysis scans
+#. Coverity scans
+#. Platform tests
+
+Platforms that are not maintained upstream will undergo testing downstream in a
+pre-defined window. The platform maintainer will complete the testing and provide
+a verified score on the patch once testing is completed.
+
+** A note about test coverage from TF.org **
+
+Currently TF.org maintains a CI system to run TF-A automated tests on a
+selection of HW boards donated by TF.org members (a benefit reserved to project
+members, see the project charter for more details). This automated test coverage
+will be extended to cover testing for LTS as well for boards that are part of
+the CI system.
+
+**TFTF branching**
+
+A note about testing here. After a patch is backported to an LTS branch, that
+branch will need to be regression tested. Since TFTF moves forward with latest
+TF-A changes, newer TFTF tests may not apply to old LTS branches. Therefore
+TFTF will also need to be branched, in-sync with TF-A LTS branches. In other
+words, there will be one TFTF LTS branch corresponding to each TF-A LTS branch.
+The TFTF LTS branch will be used to regression test the corresponding TF-A LTS
+branch.
+
+As we work with the LTS branch of TFTF, we might also need fixes for TFTF
+itself to be ported to LTS. However, decision-making about those patches need
+not be as stringent as for TF-A.
+
+Release details
+---------------
+This section goes into details of what the LTS release process will look like.
+
+
+**Test-and-debug period**
+
+Since the LTS branch will be used in product releases, it is expected that more
+testing and debugging will be done on the November release of TF-A. Therefore
+it would make sense to leave at least a month after the November release and
+then cut the LTS branch. We recommend two months, given that one of the months
+is December which tends to be slower due to holidays. So, an end-of-November
+TF-A release would result in a beginning-of-February LTS release. Note that
+the LTS branch will be created at the same time as the TF-A November release,
+but it will be officially released at the end of January or early February.
+Going forward we should strive to make the period smaller and smaller until
+ideally it coincides with TF-A November release which means that our test
+and CI/CD infra is good enough to allow that to happen.
+
+**Example timeline**
+
+Below is an example timeline starting from the November 2022 release of TF-A.
+
+.. image:: ../resources/diagrams/lts-timeline-example.png
+
+- Nov 2022: TF-A 2.8 is released towards the end of Nov, 2022. Not shown in the
+  diagram, at the same time LTS release candidate branch is made which is based
+  on TF-A 2.8. This means new features going in 2.8 won’t go in the LTS branch.
+  We can call it `LTS 2.8-rc`.
+- Feb 2023: After testing and debugging LTS 2.8-rc for a couple of months,
+  LTS 2.8.0 is officially released in early Feb 2023.
+- May 2023: TF-A 2.9 is released but since this is not an LTS branch it doesn’t
+  affect LTS.
+- Somewhere between May and Nov of 2023: A security advisory comes up and the
+  related patches go into TF-A master branch. Since these patches fall under
+  LTS criteria, they are backported to LTS 2.8.0 which results in LTS 2.8.1
+  being released. Note that here we don’t allow the extra testing and debugging
+  time that we had between Nov 2022 and early Feb 2023. This is because there
+  isn’t as much to test and debug as an annual LTS release has. Also companies
+  might want to deploy critical patches soon.
+- Nov 2023: TF-A 2.10 is released. Not shown in the diagram, at the same time
+  LTS 2.10-rc is made. It’s tested by partners for a couple of months.
+- Feb 2024: LTS 2.10.1 is released in early Feb. Now there are two LTS
+  branches: 2.8.1 and 2.10.1.
+
+Note that TFTF will follow similar branching model as TF-A LTS, i.e. there will
+be TFTF LTS 2.8.0 in Feb 2023, 2.8.1 (if new TFTF tests need to be added for
+the security advisory) when there is TF-A LTS 2.8.1 and so on.
+
+Maintainership
+--------------
+
+**Guidelines & Responsibilities**
+
+#. Maintainers shall be impartial and strive to work for the benefit of
+   the community
+#. Objective and well-defined merge criteria to avoid confusion and discussions
+   at random points in time when there is a "candidate" patch
+#. The maintainers shall explain the lifecycle of a patch to the community,
+   with a detailed description of the maximum time spent in each step
+#. Automate, automate, automate
+#. Reviewers should not focus too much on "what" and instead focus on "how"
+#. Constantly refine the merge criteria to include more partner use cases
+#. Ensure that all candidate patches flow from the main branch to all LTS branches
+
+**Options**
+
+These are some options in the order of preference.
+
+#. Current set of :ref:`lts maintainers` from tf.org(or hired contractor) take care of the LTS
+#. From the community, create a set of maintainers focused solely on the LTS branches
+
+A day in the life of a maintainer
+*********************************
+This section documents the daily tasks that a maintainer might perform to
+support the LTS program. It is expected that a maintainer follows clearly laid
+down steps and does not have to make policy level decisions for merge, testing,
+or candidate patch selection.
+
+#. Monitor the main branch to identify candidate patches for the LTS branches
+#. Inform the LTS maintainers mailing list of a new candidate patch for LTS and solicit feedback
+#. Start the review process and CI/CD cycle for the patch
+#. Review the CI/CD output to ensure that the quality bar is met
+#. After reviews are complete, merge the patch and bump the minor version, if required
+#. Monitor the mailing list for any LTS related issues
+#. Propose or solicit patches to the main branch and tag them as candidates for LTS
+
+Execution Plan
+**************
+This section lists the steps needed to put the LTS system in place. However,
+to kick start LTS in Nov ‘22, only a few steps are needed. The rest can follow
+in the background.
+
+Initial release steps
+*********************
+
+The following steps are necessary to kickstart the project and potentially
+create the first LTS from the Nov’22 release.
+
+#. Create a TF-A LTS release-candidate branch and a TFTF LTS branch immediately
+   after the Nov’22 release
+#. Request all platform-owners to test and debug the RC branch
+#. Gather feedback from the test and debug cycle
+#. Mark the TF-A LTS branch ready by the end of January
+#. Announce the official LTS release availability on the mailing lists
+
+Long term release plan
+**********************
+Above will buy us time to then work on the rest of the execution plan which
+is given below.
+
+#. The review criteria for LTS patches must be the same as TF-A patches
+#. The maintainers shall publish the well-defined merge criteria to allow
+   the community to choose candidate patches
+#. The maintainers shall publish a well-defined test specification for any
+   patch entering the LTS branch
+
+   a. Tests required to pass in the CI/CD flow
+   b. Static analysis scans
+   c. Coverity scans
+
+#. The maintainers shall publish a mechanism to choose candidate patches for
+   the LTS branch
+#. The maintainers shall publish a mechanism to report bugs `[1]`_ seen with
+   an LTS branch
+#. The maintainers shall publish a versioning mechanism for the LTS branch
+
+   a. Bump minor version for every “logical” `[2]`_ fix that gets merged
+
+#. The CI/CD infrastructure shall provide test support for all “live” LTS
+   branches at any given point in time
+#. The CI/CD infrastructure shall provide means to
+
+   a. notify all maintainers that a patch is ready for review
+   b. automatically cherry-pick a patch to a given LTS branch
+   c. get it through the CI/CD testing flow
+   d. send nag emails to maintainers at regular intervals to ensure reviews keep moving
+
+FAQ
+***
+
+In our discussions, in addition to the above points we also considered some
+questions. They have been discussed on the mailing list too.
+
+| Q. What happens when a bug fix applies just to a LTS branch and not to the
+     master branch?
+| A. This will be treated as a special case and the bug, and the fix will be
+     discussed
+
+| Q. When testing a backported patch, what if one of the partners needs more
+     time while the patch fix is time-critical and, hence slowing other
+     partners?
+| A. The maintainers will add more detail to the review and merge process to
+     handle this scenario.
+
+| Q. How do we handle the increasing version numbers for errata fixes?
+| A. Too many CPU errata workarounds resulting in too many LTS releases.
+     We propose bumping the version number for each logical fix as
+     described in the section “Long term release plan” above because
+     that will help accurately track what changes have been deployed in-field.
+
+| Q. What if LTS support duration needs to be extended to longer than 5 years?
+| A. Still under discussion.
+
+These are uncharted waters, and we will face some unseen problems. When they
+become real problems, then we will have concrete data and be better able to
+address them. This means that our LTS definition as presented in this document
+is not the final one. We will constantly be discussing it and deciding how to
+adapt it as we see practical problems.
+
+.. _[1]:
+
+[1] The plan is to create a system where reviewers can tag a patch on mainline which
+gets automatically rebased on LTS and pushed to Gerrit. On seeing this patch,
+the CI/CD starts tests and provides a score. In parallel, the system also sends
+an email to the maintainers announcing the arrival of a candidate patch for the
+LTS branch.
+
+.. _[2]:
+
+[2] Logical will be a patch or patches implementing a certain fix. For example, if a
+security mitigation is fixed with the help of three patches, then all of them are
+considered as one "logical" fix. The version is incremented only after all these
+patches are merged. with the maintainers. If agreed unanimously, the bug fix
+will be merged to the affected LTS branches after completing the review process.
diff --git a/docs/about/maintainers.rst b/docs/about/maintainers.rst
index 9a2ae73..010c4f0 100644
--- a/docs/about/maintainers.rst
+++ b/docs/about/maintainers.rst
@@ -51,6 +51,8 @@
 :|M|: Manish Badarkhe <manish.badarkhe@arm.com>
 :|G|: `ManishVB-Arm`_
 
+.. _lts maintainers:
+
 LTS Maintainers
 ---------------
 
diff --git a/docs/glossary.rst b/docs/glossary.rst
index 89113c0..555f1e3 100644
--- a/docs/glossary.rst
+++ b/docs/glossary.rst
@@ -121,6 +121,9 @@
       Memory Tagging Extension. An optional Armv8.5 extension that enables
       hardware-assisted memory tagging.
 
+   LTS
+      Long-Term Support
+
    OEN
       Owning Entity Number
 
diff --git a/docs/resources/diagrams/lts-timeline-example.png b/docs/resources/diagrams/lts-timeline-example.png
new file mode 100644
index 0000000..edb1145
--- /dev/null
+++ b/docs/resources/diagrams/lts-timeline-example.png
Binary files differ