diff --git a/plat/arm/board/fvp/fvp_bl2_el3_setup.c b/plat/arm/board/fvp/fvp_bl2_el3_setup.c
new file mode 100644
index 0000000..69f2f7a
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl2_el3_setup.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_arm.h>
+#include "fvp_private.h"
+
+void bl2_el3_early_platform_setup(u_register_t arg0 __unused,
+				  u_register_t arg1 __unused,
+				  u_register_t arg2 __unused,
+				  u_register_t arg3 __unused)
+{
+	arm_bl2_el3_early_platform_setup();
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+	/*
+	 * Enable coherency in Interconnect for the primary CPU's cluster.
+	 */
+	fvp_interconnect_enable();
+}
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index 7edbd3d..5f5b743 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -126,6 +126,13 @@
 				plat/arm/board/fvp/fvp_trusted_boot.c		\
 				${FVP_SECURITY_SOURCES}
 
+ifeq (${BL2_AT_EL3},1)
+BL2_SOURCES		+=	plat/arm/board/fvp/${ARCH}/fvp_helpers.S	\
+				plat/arm/board/fvp/fvp_bl2_el3_setup.c		\
+				${FVP_CPU_LIBS}					\
+				${FVP_INTERCONNECT_SOURCES}
+endif
+
 ifeq (${FVP_USE_SP804_TIMER},1)
 BL2_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
 endif
diff --git a/plat/arm/common/arm_bl2_el3_setup.c b/plat/arm/common/arm_bl2_el3_setup.c
new file mode 100644
index 0000000..e70d115
--- /dev/null
+++ b/plat/arm/common/arm_bl2_el3_setup.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <console.h>
+#include <generic_delay_timer.h>
+#include <plat_arm.h>
+#include <platform.h>
+
+#pragma weak bl2_el3_early_platform_setup
+#pragma weak bl2_el3_plat_arch_setup
+#pragma weak bl2_el3_plat_prepare_exit
+
+static meminfo_t bl2_el3_tzram_layout;
+
+/*
+ * Perform arm specific early platform setup. At this moment we only initialize
+ * the console and the memory layout.
+ */
+void arm_bl2_el3_early_platform_setup(void)
+{
+	/* Initialize the console to provide early debug support */
+	console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ,
+			ARM_CONSOLE_BAUDRATE);
+
+	/*
+	 * Allow BL2 to see the whole Trusted RAM. This is determined
+	 * statically since we cannot rely on BL1 passing this information
+	 * in the BL2_AT_EL3 case.
+	 */
+	bl2_el3_tzram_layout.total_base = ARM_BL_RAM_BASE;
+	bl2_el3_tzram_layout.total_size = ARM_BL_RAM_SIZE;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_arm_io_setup();
+}
+
+void bl2_el3_early_platform_setup(u_register_t arg0 __unused,
+				  u_register_t arg1 __unused,
+				  u_register_t arg2 __unused,
+				  u_register_t arg3 __unused)
+{
+	arm_bl2_el3_early_platform_setup();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	plat_arm_interconnect_init();
+	/*
+	 * Enable Interconnect coherency for the primary CPU's cluster.
+	 */
+	plat_arm_interconnect_enter_coherency();
+
+	generic_delay_timer_init();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void arm_bl2_el3_plat_arch_setup(void)
+{
+	arm_setup_page_tables(bl2_el3_tzram_layout.total_base,
+			      bl2_el3_tzram_layout.total_size,
+			      BL_CODE_BASE,
+			      BL_CODE_END,
+			      BL_RO_DATA_BASE,
+			      BL_RO_DATA_END
+#if USE_COHERENT_MEM
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
+#endif
+			      );
+
+#ifdef AARCH32
+	enable_mmu_secure(0);
+#else
+	enable_mmu_el3(0);
+#endif
+}
+
+void bl2_el3_plat_arch_setup(void)
+{
+	arm_bl2_el3_plat_arch_setup();
+}
+
+void bl2_el3_plat_prepare_exit(void)
+{
+}
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index fab57f1..e6ce18a 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -150,6 +150,11 @@
 				drivers/io/io_storage.c				\
 				plat/arm/common/arm_bl2_setup.c			\
 				plat/arm/common/arm_io_storage.c
+
+ifeq (${BL2_AT_EL3},1)
+BL2_SOURCES		+=	plat/arm/common/arm_bl2_el3_setup.c
+endif
+
 ifeq (${LOAD_IMAGE_V2},1)
 # Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use
 # the AArch32 descriptors.