diff --git a/drivers/arm/gic/gic.mk b/drivers/arm/gic/gic.mk
new file mode 100644
index 0000000..ad30984
--- /dev/null
+++ b/drivers/arm/gic/gic.mk
@@ -0,0 +1,32 @@
+#
+# Copyright (c) 2025, Arm Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+GIC_REVISIONS_ := 1 2 3
+ifeq ($(filter $(USE_GIC_DRIVER),$(GIC_REVISIONS_)),)
+$(error USE_GIC_DRIVER can only be one of $(GIC_REVISIONS_))
+endif
+
+ifeq (${USE_GIC_DRIVER},2)
+include drivers/arm/gic/v2/gicv2.mk
+GIC_SOURCES	:=	${GICV2_SOURCES}			\
+			drivers/arm/gic/v2/gicv2_base.c	\
+			plat/common/plat_gicv2.c
+else ifeq (${USE_GIC_DRIVER},3)
+include drivers/arm/gic/v3/gicv3.mk
+GIC_SOURCES	:=	${GICV3_SOURCES}			\
+			drivers/arm/gic/v3/gicv3_base.c	\
+			plat/common/plat_gicv3.c
+endif
+
+ifeq ($(ARCH),aarch64)
+BL31_SOURCES	+=	${GIC_SOURCES}
+else
+BL32_SOURCES	+=	${GIC_SOURCES}
+endif
+
+$(eval $(call add_defines,\
+	USE_GIC_DRIVER \
+))
diff --git a/drivers/arm/gic/v2/gicv2_base.c b/drivers/arm/gic/v2/gicv2_base.c
new file mode 100644
index 0000000..317375f
--- /dev/null
+++ b/drivers/arm/gic/v2/gicv2_base.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2015-2025, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <drivers/arm/gic.h>
+#include <drivers/arm/gicv2.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#if USE_GIC_DRIVER != 2
+#error "This file should only be used with GENERIC_GIC_DRIVER=2"
+#endif
+
+/******************************************************************************
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ *****************************************************************************/
+static const interrupt_prop_t arm_interrupt_props[] = {
+	PLAT_ARM_G1S_IRQ_PROPS(GICV2_INTR_GROUP0),
+	PLAT_ARM_G0_IRQ_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+static const gicv2_driver_data_t arm_gic_data = {
+	.gicd_base = PLAT_ARM_GICD_BASE,
+	.gicc_base = PLAT_ARM_GICC_BASE,
+	.interrupt_props = arm_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(arm_interrupt_props),
+	.target_masks = target_mask_array,
+	.target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/******************************************************************************
+ * ARM common helper to initialize the GICv2 only driver.
+ *****************************************************************************/
+void __init gic_init(unsigned int cpu_idx)
+{
+	gicv2_driver_init(&arm_gic_data);
+	gicv2_distif_init();
+}
+
+/******************************************************************************
+ * ARM common helper to enable the GICv2 CPU interface
+ *****************************************************************************/
+void gic_cpuif_enable(unsigned int cpu_idx)
+{
+	gicv2_cpuif_enable();
+}
+
+/******************************************************************************
+ * ARM common helper to disable the GICv2 CPU interface
+ *****************************************************************************/
+void gic_cpuif_disable(unsigned int cpu_idx)
+{
+	gicv2_cpuif_disable();
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the per cpu distributor interface in GICv2
+ *****************************************************************************/
+void gic_pcpu_init(unsigned int cpu_idx)
+{
+	gicv2_pcpu_distif_init();
+	gicv2_set_pe_target_mask(plat_my_core_pos());
+}
+
+/******************************************************************************
+ * Stubs for Redistributor power management. Although GICv2 doesn't have
+ * Redistributor interface, these are provided for the sake of uniform GIC API
+ *****************************************************************************/
+void gic_pcpu_off(unsigned int cpu_idx)
+{
+	return;
+}
+
+/******************************************************************************
+ * ARM common helper to save & restore the GICv3 on resume from system suspend.
+ * The normal world currently takes care of saving and restoring the GICv2
+ * registers due to legacy reasons. Hence we just initialize the Distributor
+ * on resume from system suspend.
+ *****************************************************************************/
+void gic_save(void)
+{
+	return;
+}
+
+void gic_resume(void)
+{
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+}
diff --git a/drivers/arm/gic/v3/gicv3_base.c b/drivers/arm/gic/v3/gicv3_base.c
new file mode 100644
index 0000000..f6f4acf
--- /dev/null
+++ b/drivers/arm/gic/v3/gicv3_base.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (c) 2015-2025, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <platform_def.h>
+
+#include <common/debug.h>
+#include <common/interrupt_props.h>
+#include <drivers/arm/gic.h>
+#include <drivers/arm/gicv3.h>
+#include <lib/utils.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#if USE_GIC_DRIVER != 3
+#error "This file should only be used with GENERIC_GIC_DRIVER=3"
+#endif
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+/* Default GICR base address to be used for GICR probe. */
+static const uintptr_t gicr_base_addrs[2] = {
+	PLAT_ARM_GICR_BASE,	/* GICR Base address of the primary CPU */
+	0U			/* Zero Termination */
+};
+
+/* List of zero terminated GICR frame addresses which CPUs will probe */
+static const uintptr_t *gicr_frames = gicr_base_addrs;
+
+static const interrupt_prop_t arm_interrupt_props[] = {
+	PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
+	PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0),
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
+	INTR_PROP_DESC(PLAT_CORE_FAULT_IRQ, PLAT_RAS_PRI, INTR_GROUP0,
+			GIC_INTR_CFG_LEVEL)
+#endif
+};
+
+/*
+ * We save and restore the GICv3 context on system suspend. Allocate the
+ * data in the designated EL3 Secure carve-out memory. The `used` attribute
+ * is used to prevent the compiler from removing the gicv3 contexts.
+ */
+static gicv3_redist_ctx_t rdist_ctx __section(".arm_el3_tzc_dram") __used;
+static gicv3_dist_ctx_t dist_ctx __section(".arm_el3_tzc_dram") __used;
+
+/* Define accessor function to get reference to the GICv3 context */
+DEFINE_LOAD_SYM_ADDR(rdist_ctx)
+DEFINE_LOAD_SYM_ADDR(dist_ctx)
+
+/*
+ * MPIDR hashing function for translating MPIDRs read from GICR_TYPER register
+ * to core position.
+ *
+ * Calculating core position is dependent on MPIDR_EL1.MT bit. However, affinity
+ * values read from GICR_TYPER don't have an MT field. To reuse the same
+ * translation used for CPUs, we insert MT bit read from the PE's MPIDR into
+ * that read from GICR_TYPER.
+ *
+ * Assumptions:
+ *
+ *   - All CPUs implemented in the system have MPIDR_EL1.MT bit set;
+ *   - No CPUs implemented in the system use affinity level 3.
+ */
+static unsigned int arm_gicv3_mpidr_hash(u_register_t mpidr)
+{
+	mpidr |= (read_mpidr_el1() & MPIDR_MT_MASK);
+	return plat_arm_calc_core_pos(mpidr);
+}
+
+gicv3_driver_data_t gic_data __unused = {
+	.gicd_base = PLAT_ARM_GICD_BASE,
+	.gicr_base = 0U,
+	.interrupt_props = arm_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(arm_interrupt_props),
+	.rdistif_num = PLATFORM_CORE_COUNT,
+	.rdistif_base_addrs = rdistif_base_addrs,
+	.mpidr_to_core_pos = arm_gicv3_mpidr_hash
+};
+
+/*
+ * By default, gicr_frames will be pointing to gicr_base_addrs. If
+ * the platform supports a non-contiguous GICR frames (GICR frames located
+ * at uneven offset), plat_arm_override_gicr_frames function can be used by
+ * such platform to override the gicr_frames.
+ */
+void plat_arm_override_gicr_frames(const uintptr_t *plat_gicr_frames)
+{
+	assert(plat_gicr_frames != NULL);
+	gicr_frames = plat_gicr_frames;
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the GIC. Only invoked by BL31
+ *****************************************************************************/
+void __init gic_init(unsigned int cpu_idx)
+{
+	/*
+	 * The GICv3 driver is initialized in EL3 and does not need
+	 * to be initialized again in SEL1. This is because the S-EL1
+	 * can use GIC system registers to manage interrupts and does
+	 * not need GIC interface base addresses to be configured.
+	 */
+#if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+	(defined(__aarch64__) && defined(IMAGE_BL31))
+	gicv3_driver_init(&gic_data);
+#endif
+	gicv3_distif_init();
+}
+
+/******************************************************************************
+ * ARM common helper to enable the GIC CPU interface
+ *****************************************************************************/
+void gic_cpuif_enable(unsigned int cpu_idx)
+{
+	gicv3_cpuif_enable(cpu_idx);
+}
+
+/******************************************************************************
+ * ARM common helper to disable the GIC CPU interface
+ *****************************************************************************/
+void gic_cpuif_disable(unsigned int cpu_idx)
+{
+	gicv3_cpuif_disable(cpu_idx);
+}
+
+/******************************************************************************
+ * ARM common helper function to iterate over all GICR frames and discover the
+ * corresponding per-cpu redistributor frame as well as initialize the
+ * corresponding interface in GICv3.
+ *****************************************************************************/
+void gic_pcpu_init(unsigned int cpu_idx)
+{
+	int result;
+	const uintptr_t *plat_gicr_frames = gicr_frames;
+
+	do {
+		result = gicv3_rdistif_probe(*plat_gicr_frames);
+
+		/* If the probe is successful, no need to proceed further */
+		if (result == 0)
+			break;
+
+		plat_gicr_frames++;
+	} while (*plat_gicr_frames != 0U);
+
+	if (result == -1) {
+		ERROR("No GICR base frame found for CPU 0x%lx\n", read_mpidr());
+		panic();
+	}
+	gicv3_rdistif_init(cpu_idx);
+}
+
+/******************************************************************************
+ * ARM common helpers to power GIC redistributor interface
+ *****************************************************************************/
+void gic_pcpu_off(unsigned int cpu_idx)
+{
+	gicv3_rdistif_off(cpu_idx);
+}
+
+/******************************************************************************
+ * Common helper to save & restore the GICv3 on resume from system suspend. It
+ * is the platform's responsibility to call these.
+ *****************************************************************************/
+void gic_save(void)
+{
+	gicv3_redist_ctx_t * const rdist_context =
+			(gicv3_redist_ctx_t *)LOAD_ADDR_OF(rdist_ctx);
+	gicv3_dist_ctx_t * const dist_context =
+			(gicv3_dist_ctx_t *)LOAD_ADDR_OF(dist_ctx);
+
+	/*
+	 * If an ITS is available, save its context before
+	 * the Redistributor using:
+	 * gicv3_its_save_disable(gits_base, &its_ctx[i])
+	 * Additionally, an implementation-defined sequence may
+	 * be required to save the whole ITS state.
+	 */
+
+	/*
+	 * Save the GIC Redistributors and ITS contexts before the
+	 * Distributor context. As we only handle SYSTEM SUSPEND API,
+	 * we only need to save the context of the CPU that is issuing
+	 * the SYSTEM SUSPEND call, i.e. the current CPU.
+	 */
+	gicv3_rdistif_save(plat_my_core_pos(), rdist_context);
+
+	/* Save the GIC Distributor context */
+	gicv3_distif_save(dist_context);
+
+	/*
+	 * From here, all the components of the GIC can be safely powered down
+	 * as long as there is an alternate way to handle wakeup interrupt
+	 * sources.
+	 */
+}
+
+void gic_resume(void)
+{
+	const gicv3_redist_ctx_t *rdist_context =
+			(gicv3_redist_ctx_t *)LOAD_ADDR_OF(rdist_ctx);
+	const gicv3_dist_ctx_t *dist_context =
+			(gicv3_dist_ctx_t *)LOAD_ADDR_OF(dist_ctx);
+
+	/* Restore the GIC Distributor context */
+	gicv3_distif_init_restore(dist_context);
+
+	/*
+	 * Restore the GIC Redistributor and ITS contexts after the
+	 * Distributor context. As we only handle SYSTEM SUSPEND API,
+	 * we only need to restore the context of the CPU that issued
+	 * the SYSTEM SUSPEND call.
+	 */
+	gicv3_rdistif_init_restore(plat_my_core_pos(), rdist_context);
+
+	/*
+	 * If an ITS is available, restore its context after
+	 * the Redistributor using:
+	 * gicv3_its_restore(gits_base, &its_ctx[i])
+	 * An implementation-defined sequence may be required to
+	 * restore the whole ITS state. The ITS must also be
+	 * re-enabled after this sequence has been executed.
+	 */
+}