diff --git a/include/drivers/arm/css/css_scp.h b/include/drivers/arm/css/css_scp.h
index f3c08c5..2b506ea 100644
--- a/include/drivers/arm/css/css_scp.h
+++ b/include/drivers/arm/css/css_scp.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -40,13 +40,13 @@
 /*
  * All CSS platforms load SCP_BL2/SCP_BL2U just below BL2 (this is where BL31
  * usually resides except when ARM_BL31_IN_DRAM is
- * set). Ensure that SCP_BL2/SCP_BL2U do not overflow into tb_fw_config.
+ * set). Ensure that SCP_BL2/SCP_BL2U do not overflow into fw_config.
  */
 CASSERT(SCP_BL2_LIMIT <= BL2_BASE, assert_scp_bl2_overwrite_bl2);
 CASSERT(SCP_BL2U_LIMIT <= BL2_BASE, assert_scp_bl2u_overwrite_bl2);
 
-CASSERT(SCP_BL2_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_scp_bl2_overflow);
-CASSERT(SCP_BL2U_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_scp_bl2u_overflow);
+CASSERT(SCP_BL2_BASE >= ARM_FW_CONFIG_LIMIT, assert_scp_bl2_overflow);
+CASSERT(SCP_BL2U_BASE >= ARM_FW_CONFIG_LIMIT, assert_scp_bl2u_overflow);
 #endif
 
 #endif /* CSS_SCP_H */
diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index 89f7c61..a6b6b2e 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -346,24 +346,24 @@
 #define CACHE_WRITEBACK_GRANULE		(U(1) << ARM_CACHE_WRITEBACK_SHIFT)
 
 /*
- * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base
+ * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
  * and limit. Leave enough space of BL2 meminfo.
  */
-#define ARM_TB_FW_CONFIG_BASE		(ARM_BL_RAM_BASE + sizeof(meminfo_t))
-#define ARM_TB_FW_CONFIG_LIMIT		(ARM_BL_RAM_BASE + (PAGE_SIZE / 2U))
+#define ARM_FW_CONFIG_BASE		(ARM_BL_RAM_BASE + sizeof(meminfo_t))
+#define ARM_FW_CONFIG_LIMIT		(ARM_BL_RAM_BASE + (PAGE_SIZE / 2U))
 
 /*
  * Boot parameters passed from BL2 to BL31/BL32 are stored here
  */
-#define ARM_BL2_MEM_DESC_BASE		ARM_TB_FW_CONFIG_LIMIT
+#define ARM_BL2_MEM_DESC_BASE		ARM_FW_CONFIG_LIMIT
 #define ARM_BL2_MEM_DESC_LIMIT		(ARM_BL2_MEM_DESC_BASE +	\
 							(PAGE_SIZE / 2U))
 
 /*
  * Define limit of firmware configuration memory:
- * ARM_TB_FW_CONFIG + ARM_BL2_MEM_DESC memory
+ * ARM_FW_CONFIG + ARM_BL2_MEM_DESC memory
  */
-#define ARM_FW_CONFIG_LIMIT		(ARM_BL_RAM_BASE + PAGE_SIZE)
+#define ARM_FW_CONFIGS_LIMIT		(ARM_BL_RAM_BASE + PAGE_SIZE)
 
 /*******************************************************************************
  * BL1 specific defines.
@@ -461,7 +461,7 @@
  * SP_MIN is the only BL image in SRAM. Allocate the whole of SRAM (excluding
  * the page reserved for fw_configs) to BL32
  */
-#  define BL32_BASE			ARM_FW_CONFIG_LIMIT
+#  define BL32_BASE			ARM_FW_CONFIGS_LIMIT
 #  define BL32_LIMIT			(ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
 # else
 /* Put BL32 below BL2 in the Trusted SRAM.*/
@@ -505,7 +505,7 @@
 #  define TSP_SEC_MEM_BASE		ARM_BL_RAM_BASE
 #  define TSP_SEC_MEM_SIZE		ARM_BL_RAM_SIZE
 #  define TSP_PROGBITS_LIMIT		BL31_BASE
-#  define BL32_BASE			ARM_FW_CONFIG_LIMIT
+#  define BL32_BASE			ARM_FW_CONFIGS_LIMIT
 #  define BL32_LIMIT			BL31_BASE
 # elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_DRAM_ID
 #  define TSP_SEC_MEM_BASE		PLAT_ARM_TRUSTED_DRAM_BASE