diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index ae80628..9d47b90 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -59,7 +59,12 @@
 #define ARM_DRAM_ID			2
 
 /* The first 4KB of Trusted SRAM are used as shared memory */
+#ifdef __PLAT_ARM_TRUSTED_SRAM_BASE__
+#define ARM_TRUSTED_SRAM_BASE		PLAT_ARM_TRUSTED_SRAM_BASE
+#else
 #define ARM_TRUSTED_SRAM_BASE		UL(0x04000000)
+#endif /* __PLAT_ARM_TRUSTED_SRAM_BASE__ */
+
 #define ARM_SHARED_RAM_BASE		ARM_TRUSTED_SRAM_BASE
 #define ARM_SHARED_RAM_SIZE		UL(0x00001000)	/* 4 KB */
 
@@ -149,8 +154,12 @@
 					 ARM_TZC_DRAM1_SIZE)
 #define ARM_NS_DRAM1_END		(ARM_NS_DRAM1_BASE +		\
 					 ARM_NS_DRAM1_SIZE - 1U)
-
+#ifdef __PLAT_ARM_DRAM1_BASE__
+#define ARM_DRAM1_BASE			PLAT_ARM_DRAM1_BASE
+#else
 #define ARM_DRAM1_BASE			ULL(0x80000000)
+#endif /* __PLAT_ARM_DRAM1_BASE__ */
+
 #define ARM_DRAM1_SIZE			ULL(0x80000000)
 #define ARM_DRAM1_END			(ARM_DRAM1_BASE +		\
 					 ARM_DRAM1_SIZE - 1U)
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_setup.c b/plat/arm/board/fvp_r/fvp_r_bl1_setup.c
new file mode 100644
index 0000000..91709d8
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_setup.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <bl1/bl1.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/arm/sp805.h>
+
+#include "fvp_r_private.h"
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/arm_def.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+
+/*******************************************************************************
+ * Perform any BL1 specific platform actions.
+ ******************************************************************************/
+void bl1_early_platform_setup(void)
+{
+	arm_bl1_early_platform_setup();
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+	/*
+	 * Enable coherency in Interconnect for the primary CPU's cluster.
+	 */
+	fvp_interconnect_enable();
+}
+
+void plat_arm_secure_wdt_start(void)
+{
+	sp805_start(ARM_SP805_TWDG_BASE, ARM_TWDG_LOAD_VAL);
+}
+
+void plat_arm_secure_wdt_stop(void)
+{
+	sp805_stop(ARM_SP805_TWDG_BASE);
+}
+
+void bl1_platform_setup(void)
+{
+	arm_bl1_platform_setup();
+
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+}
+
+__dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved)
+{
+	/* Setup the watchdog to reset the system as soon as possible */
+	sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
+
+	while (true) {
+		wfi();
+	}
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_common.c b/plat/arm/board/fvp_r/fvp_r_common.c
new file mode 100644
index 0000000..693a6d7
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_common.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/arm/cci.h>
+#include <drivers/arm/ccn.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/mmio.h>
+#include <lib/smccc.h>
+#include <lib/xlat_tables/xlat_tables_compat.h>
+#include <services/arm_arch_svc.h>
+
+#include "fvp_r_private.h"
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+
+/* Defines for GIC Driver build time selection */
+#define FVP_R_GICV3		2
+
+/*******************************************************************************
+ * arm_config holds the characteristics of the differences between the FVP_R
+ * platforms. It will be populated during cold boot at each boot stage by the
+ * primary before enabling the MPU (to allow interconnect configuration) &
+ * used thereafter. Each BL will have its own copy to allow independent
+ * operation.
+ ******************************************************************************/
+arm_config_t arm_config;
+
+#define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
+					DEVICE0_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_DEVICE1	MAP_REGION_FLAT(DEVICE1_BASE,			\
+					DEVICE1_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Need to be mapped with write permissions in order to set a new non-volatile
+ * counter value.
+ */
+#define MAP_DEVICE2	MAP_REGION_FLAT(DEVICE2_BASE,			\
+					DEVICE2_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Table of memory regions for various BL stages to map using the MPU.
+ * This doesn't include Trusted SRAM as setup_page_tables() already takes care
+ * of mapping it.
+ *
+ * The flash needs to be mapped as writable in order to erase the FIP's Table of
+ * Contents in case of unrecoverable error (see plat_error_handler()).
+ */
+#ifdef IMAGE_BL1
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH0_RW,
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+	MAP_DEVICE1,
+#if TRUSTED_BOARD_BOOT
+	/* To access the Root of Trust Public Key registers. */
+	MAP_DEVICE2,
+	/* Map DRAM to authenticate NS_BL2U image. */
+	ARM_MAP_NS_DRAM1,
+#endif
+	{0}
+};
+#endif
+
+ARM_CASSERT_MMAP
+
+#if FVP_R_INTERCONNECT_DRIVER != FVP_R_CCN
+static const int fvp_cci400_map[] = {
+	PLAT_FVP_R_CCI400_CLUS0_SL_PORT,
+	PLAT_FVP_R_CCI400_CLUS1_SL_PORT,
+};
+
+static const int fvp_cci5xx_map[] = {
+	PLAT_FVP_R_CCI5XX_CLUS0_SL_PORT,
+	PLAT_FVP_R_CCI5XX_CLUS1_SL_PORT,
+};
+
+static unsigned int get_interconnect_master(void)
+{
+	unsigned int master;
+	u_register_t mpidr;
+
+	mpidr = read_mpidr_el1();
+	master = ((arm_config.flags & ARM_CONFIG_FVP_SHIFTED_AFF) != 0U) ?
+		MPIDR_AFFLVL2_VAL(mpidr) : MPIDR_AFFLVL1_VAL(mpidr);
+
+	assert(master < FVP_R_CLUSTER_COUNT);
+	return master;
+}
+#endif
+
+/*******************************************************************************
+ * Initialize the platform config for future decision making
+ ******************************************************************************/
+void __init fvp_config_setup(void)
+{
+	arm_config.flags |= ARM_CONFIG_BASE_MMAP;
+
+	/*
+	 * We assume that the presence of MT bit, and therefore shifted
+	 * affinities, is uniform across the platform: either all CPUs, or no
+	 * CPUs implement it.
+	 */
+	if ((read_mpidr_el1() & MPIDR_MT_MASK) != 0U) {
+		arm_config.flags |= ARM_CONFIG_FVP_SHIFTED_AFF;
+	}
+}
+
+
+void __init fvp_interconnect_init(void)
+{
+#if FVP_R_INTERCONNECT_DRIVER == FVP_R_CCN
+	if (ccn_get_part0_id(PLAT_ARM_CCN_BASE) != CCN_502_PART0_ID) {
+		ERROR("Unrecognized CCN variant detected. Only CCN-502 is supported");
+		panic();
+	}
+
+	plat_arm_interconnect_init();
+#else
+	uintptr_t cci_base = 0U;
+	const int *cci_map = NULL;
+	unsigned int map_size = 0U;
+
+	/* Initialize the right interconnect */
+	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI5XX) != 0U) {
+		cci_base = PLAT_FVP_R_CCI5XX_BASE;
+		cci_map = fvp_cci5xx_map;
+		map_size = ARRAY_SIZE(fvp_cci5xx_map);
+	} else if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI400) != 0U) {
+		cci_base = PLAT_FVP_R_CCI400_BASE;
+		cci_map = fvp_cci400_map;
+		map_size = ARRAY_SIZE(fvp_cci400_map);
+	} else {
+		return;
+	}
+
+	assert(cci_base != 0U);
+	assert(cci_map != NULL);
+	cci_init(cci_base, cci_map, map_size);
+#endif
+}
+
+void fvp_interconnect_enable(void)
+{
+#if FVP_R_INTERCONNECT_DRIVER == FVP_R_CCN
+	plat_arm_interconnect_enter_coherency();
+#else
+	unsigned int master;
+
+	if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 |
+				 ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) {
+		master = get_interconnect_master();
+		cci_enable_snoop_dvm_reqs(master);
+	}
+#endif
+}
+
+void fvp_interconnect_disable(void)
+{
+#if FVP_R_INTERCONNECT_DRIVER == FVP_R_CCN
+	plat_arm_interconnect_exit_coherency();
+#else
+	unsigned int master;
+
+	if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 |
+				 ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) {
+		master = get_interconnect_master();
+		cci_disable_snoop_dvm_reqs(master);
+	}
+#endif
+}
+
+#if TRUSTED_BOARD_BOOT
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+	assert(heap_addr != NULL);
+	assert(heap_size != NULL);
+
+	return arm_get_mbedtls_heap(heap_addr, heap_size);
+}
+#endif
+
+void fvp_timer_init(void)
+{
+#if USE_SP804_TIMER
+	/* Enable the clock override for SP804 timer 0, which means that no
+	 * clock dividers are applied and the raw (35MHz) clock will be used.
+	 */
+	mmio_write_32(V2M_SP810_BASE, FVP_R_SP810_CTRL_TIM0_OV);
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(V2M_SP804_TIMER0_BASE,
+			SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV);
+#else
+	generic_delay_timer_init();
+
+	/* Enable System level generic timer */
+	mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
+			CNTCR_FCREQ(0U) | CNTCR_EN);
+#endif /* USE_SP804_TIMER */
+}
+
+/* Get SOC version */
+int32_t plat_get_soc_version(void)
+{
+	return (int32_t)
+		((ARM_SOC_IDENTIFICATION_CODE << ARM_SOC_IDENTIFICATION_SHIFT)
+		 | (ARM_SOC_CONTINUATION_CODE << ARM_SOC_CONTINUATION_SHIFT)
+		 | FVP_R_SOC_ID);
+}
+
+/* Get SOC revision */
+int32_t plat_get_soc_revision(void)
+{
+	unsigned int sys_id;
+
+	sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
+	return (int32_t)((sys_id >> V2M_SYS_ID_REV_SHIFT) &
+			V2M_SYS_ID_REV_MASK);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_def.h b/plat/arm/board/fvp_r/fvp_r_def.h
new file mode 100644
index 0000000..587832f
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_def.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_DEF_H
+#define FVP_R_DEF_H
+
+#include <lib/utils_def.h>
+
+#ifndef FVP_R_CLUSTER_COUNT
+#error "FVP_R_CLUSTER_COUNT is not set in makefile"
+#endif
+
+#ifndef FVP_R_MAX_CPUS_PER_CLUSTER
+#error "FVP_R_MAX_CPUS_PER_CLUSTER is not set in makefile"
+#endif
+
+#ifndef FVP_R_MAX_PE_PER_CPU
+#error "FVP_R_MAX_PE_PER_CPU is not set in makefile"
+#endif
+
+#define FVP_R_PRIMARY_CPU			0x0
+
+/* Defines for the Interconnect build selection */
+#define FVP_R_CCI			1
+#define FVP_R_CCN			2
+
+/******************************************************************************
+ * Definition of platform soc id
+ *****************************************************************************/
+#define FVP_R_SOC_ID      0
+
+/*******************************************************************************
+ * FVP_R memory map related constants
+ ******************************************************************************/
+
+#define FLASH1_BASE			UL(0x0c000000)
+#define FLASH1_SIZE			UL(0x04000000)
+
+#define PSRAM_BASE			UL(0x14000000)
+#define PSRAM_SIZE			UL(0x04000000)
+
+#define VRAM_BASE			UL(0x18000000)
+#define VRAM_SIZE			UL(0x02000000)
+
+/* Aggregate of all devices in the first GB */
+#define DEVICE0_BASE			UL(0x20000000)
+#define DEVICE0_SIZE			UL(0x0c200000)
+
+/*
+ *  In case of FVP_R models with CCN, the CCN register space overlaps into
+ *  the NSRAM area.
+ */
+#define DEVICE1_BASE			UL(0x2e000000)
+#define DEVICE1_SIZE			UL(0x1A00000)
+#define NSRAM_BASE			UL(0x2e000000)
+#define NSRAM_SIZE			UL(0x10000)
+/* Devices in the second GB */
+#define DEVICE2_BASE			UL(0x7fe00000)
+#define DEVICE2_SIZE			UL(0x00200000)
+
+/* Non-volatile counters */
+#define TRUSTED_NVCTR_BASE		UL(0x7fe70000)
+#define TFW_NVCTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0000))
+#define TFW_NVCTR_SIZE			UL(4)
+#define NTFW_CTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0004))
+#define NTFW_CTR_SIZE			UL(4)
+
+/* Keys */
+#define SOC_KEYS_BASE			UL(0x7fe80000)
+#define TZ_PUB_KEY_HASH_BASE		(SOC_KEYS_BASE + UL(0x0000))
+#define TZ_PUB_KEY_HASH_SIZE		UL(32)
+#define HU_KEY_BASE			(SOC_KEYS_BASE + UL(0x0020))
+#define HU_KEY_SIZE			UL(16)
+#define END_KEY_BASE			(SOC_KEYS_BASE + UL(0x0044))
+#define END_KEY_SIZE			UL(32)
+
+/* Constants to distinguish FVP_R type */
+#define HBI_BASE_FVP_R			U(0x020)
+#define REV_BASE_FVP_R_V0		U(0x0)
+#define REV_BASE_FVP_R_REVC		U(0x2)
+
+#define HBI_FOUNDATION_FVP_R		U(0x010)
+#define REV_FOUNDATION_FVP_R_V2_0	U(0x0)
+#define REV_FOUNDATION_FVP_R_V2_1	U(0x1)
+#define REV_FOUNDATION_FVP_R_v9_1	U(0x2)
+#define REV_FOUNDATION_FVP_R_v9_6	U(0x3)
+
+#define BLD_GIC_VE_MMAP			U(0x0)
+#define BLD_GIC_A53A57_MMAP		U(0x1)
+
+#define ARCH_MODEL			U(0x1)
+
+/* FVP_R Power controller base address*/
+#define PWRC_BASE			UL(0x1c100000)
+
+/* FVP_R SP804 timer frequency is 35 MHz*/
+#define SP804_TIMER_CLKMULT		1
+#define SP804_TIMER_CLKDIV		35
+
+/* SP810 controller. FVP_R specific flags */
+#define FVP_R_SP810_CTRL_TIM0_OV		BIT_32(16)
+#define FVP_R_SP810_CTRL_TIM1_OV		BIT_32(18)
+#define FVP_R_SP810_CTRL_TIM2_OV		BIT_32(20)
+#define FVP_R_SP810_CTRL_TIM3_OV		BIT_32(22)
+
+#endif /* FVP_R_DEF_H */
diff --git a/plat/arm/board/fvp_r/fvp_r_err.c b/plat/arm/board/fvp_r/fvp_r_err.c
new file mode 100644
index 0000000..0f7aeac
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_err.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <drivers/arm/sp805.h>
+#include <drivers/cfi/v2m_flash.h>
+#include <plat/arm/common/plat_arm.h>
+#include <platform_def.h>
+
+/*
+ * FVP_R error handler
+ */
+__dead2 void plat_arm_error_handler(int err)
+{
+	int ret;
+
+	switch (err) {
+	case -ENOENT:
+	case -EAUTH:
+		/* Image load or authentication error. Erase the ToC */
+		INFO("Erasing FIP ToC from flash...\n");
+		(void)nor_unlock(PLAT_ARM_FIP_BASE);
+		ret = nor_word_program(PLAT_ARM_FIP_BASE, 0);
+		if (ret != 0) {
+			ERROR("Cannot erase ToC\n");
+		} else {
+			INFO("Done\n");
+		}
+		break;
+	default:
+		/* Unexpected error */
+		break;
+	}
+
+	(void)console_flush();
+
+	/* Setup the watchdog to reset the system as soon as possible */
+	sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
+
+	while (true) {
+		wfi();
+	}
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_helpers.S b/plat/arm/board/fvp_r/fvp_r_helpers.S
new file mode 100644
index 0000000..f7a04d8
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_helpers.S
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <drivers/arm/fvp/fvp_pwrc.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/arm/gicv3.h>
+
+#include <platform_def.h>
+
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_get_my_entrypoint
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_arm_calc_core_pos
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 * TODO: Should we read the PSYS register to make sure
+	 * that the request has gone through.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+	/* ---------------------------------------------
+	 * Power down this cpu.
+	 * TODO: Do we need to worry about powering the
+	 * cluster down as well here? That will need
+	 * locks which we won't have unless an elf-
+	 * loader zeroes out the zi section.
+	 * ---------------------------------------------
+	 */
+	mrs	x0, mpidr_el1
+	mov_imm	x1, PWRC_BASE
+	str	w0, [x1, #PPOFFR_OFF]
+
+	/* ---------------------------------------------
+	 * There is no sane reason to come out of this
+	 * wfi so panic if we do. This cpu will be pow-
+	 * ered on and reset by the cpu_on pm api
+	 * ---------------------------------------------
+	 */
+	dsb	sy
+	wfi
+	no_ret	plat_panic_handler
+endfunc plat_secondary_cold_boot_setup
+
+	/* ---------------------------------------------------------------------
+	 * uintptr_t plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish between a cold and warm
+	 * boot. On FVP_R, this information can be queried from the power
+	 * controller. The Power Control SYS Status Register (PSYSR) indicates
+	 * the wake-up reason for the CPU.
+	 *
+	 * For a cold boot, return 0.
+	 * For a warm boot, read the mailbox and return the address it contains.
+	 *
+	 * TODO: PSYSR is a common register and should be
+	 * 	accessed using locks. Since it is not possible
+	 * 	to use locks immediately after a cold reset
+	 * 	we are relying on the fact that after a cold
+	 * 	reset all cpus will read the same WK field
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	/* ---------------------------------------------------------------------
+	 * When bit PSYSR.WK indicates either "Wake by PPONR" or "Wake by GIC
+	 * WakeRequest signal" then it is a warm boot.
+	 * ---------------------------------------------------------------------
+	 */
+	mrs	x2, mpidr_el1
+	mov_imm	x1, PWRC_BASE
+	str	w2, [x1, #PSYSR_OFF]
+	ldr	w2, [x1, #PSYSR_OFF]
+	ubfx	w2, w2, #PSYSR_WK_SHIFT, #PSYSR_WK_WIDTH
+	cmp	w2, #WKUP_PPONR
+	beq	warm_reset
+	cmp	w2, #WKUP_GICREQ
+	beq	warm_reset
+
+	/* Cold reset */
+	mov	x0, #0
+	ret
+
+warm_reset:
+	/* ---------------------------------------------------------------------
+	 * A mailbox is maintained in the trusted SRAM. It is flushed out of the
+	 * caches after every update using normal memory so it is safe to read
+	 * it here with SO attributes.
+	 * ---------------------------------------------------------------------
+	 */
+	mov_imm	x0, PLAT_ARM_TRUSTED_MAILBOX_BASE
+	ldr	x0, [x0]
+	cbz	x0, _panic_handler
+	ret
+
+	/* ---------------------------------------------------------------------
+	 * The power controller indicates this is a warm reset but the mailbox
+	 * is empty. This should never happen!
+	 * ---------------------------------------------------------------------
+	 */
+_panic_handler:
+	no_ret	plat_panic_handler
+endfunc plat_get_my_entrypoint
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	mov_imm	x1, MPIDR_AFFINITY_MASK
+	and	x0, x0, x1
+	cmp	x0, #FVP_R_PRIMARY_CPU
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary
+
+	/* ---------------------------------------------------------------------
+	 * unsigned int plat_arm_calc_core_pos(u_register_t mpidr)
+	 *
+	 * Function to calculate the core position on FVP_R.
+	 *
+	 * (ClusterId * FVP_R_MAX_CPUS_PER_CLUSTER * FVP_R_MAX_PE_PER_CPU) +
+	 * (CPUId * FVP_R_MAX_PE_PER_CPU) +
+	 * ThreadId
+	 *
+	 * which can be simplified as:
+	 *
+	 * ((ClusterId * FVP_R_MAX_CPUS_PER_CLUSTER + CPUId) * FVP_R_MAX_PE_PER_CPU)
+	 * + ThreadId
+	 * ---------------------------------------------------------------------
+	 */
+func plat_arm_calc_core_pos
+	/*
+	 * Check for MT bit in MPIDR. If not set, shift MPIDR to left to make it
+	 * look as if in a multi-threaded implementation.
+	 */
+	tst	x0, #MPIDR_MT_MASK
+	lsl	x3, x0, #MPIDR_AFFINITY_BITS
+	csel	x3, x3, x0, eq
+
+	/* Extract individual affinity fields from MPIDR */
+	ubfx	x0, x3, #MPIDR_AFF0_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	x1, x3, #MPIDR_AFF1_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	x2, x3, #MPIDR_AFF2_SHIFT, #MPIDR_AFFINITY_BITS
+
+	/* Compute linear position */
+	mov	x4, #FVP_R_MAX_CPUS_PER_CLUSTER
+	madd	x1, x2, x4, x1
+	mov	x5, #FVP_R_MAX_PE_PER_CPU
+	madd	x0, x1, x5, x0
+	ret
+endfunc plat_arm_calc_core_pos
diff --git a/plat/arm/board/fvp_r/fvp_r_io_storage.c b/plat/arm/board/fvp_r/fvp_r_io_storage.c
new file mode 100644
index 0000000..630d93a
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_io_storage.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_semihosting.h>
+#include <drivers/io/io_storage.h>
+#include <lib/semihosting.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/common_def.h>
+
+/* Semihosting filenames */
+#define TB_FW_CONFIG_NAME		"fvp_tb_fw_config.dtb"
+#define HW_CONFIG_NAME			"hw_config.dtb"
+
+#if TRUSTED_BOARD_BOOT
+#define TRUSTED_BOOT_FW_CERT_NAME	"tb_fw.crt"
+#define TRUSTED_KEY_CERT_NAME		"trusted_key.crt"
+#define SOC_FW_KEY_CERT_NAME		"soc_fw_key.crt"
+#define TOS_FW_KEY_CERT_NAME		"tos_fw_key.crt"
+#define NT_FW_KEY_CERT_NAME		"nt_fw_key.crt"
+#define SOC_FW_CONTENT_CERT_NAME	"soc_fw_content.crt"
+#define TOS_FW_CONTENT_CERT_NAME	"tos_fw_content.crt"
+#define NT_FW_CONTENT_CERT_NAME		"nt_fw_content.crt"
+#endif /* TRUSTED_BOARD_BOOT */
+
+/* IO devices */
+static const io_dev_connector_t *sh_dev_con;
+static uintptr_t sh_dev_handle;
+
+static const io_file_spec_t sh_file_spec[] = {
+	[TB_FW_CONFIG_ID] = {
+		.path = TB_FW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[HW_CONFIG_ID] = {
+		.path = HW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+#if TRUSTED_BOARD_BOOT
+	[TRUSTED_KEY_CERT_ID] = {
+		.path = TRUSTED_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[NON_TRUSTED_FW_KEY_CERT_ID] = {
+		.path = NT_FW_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[NON_TRUSTED_FW_CONTENT_CERT_ID] = {
+		.path = NT_FW_CONTENT_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+#endif /* TRUSTED_BOARD_BOOT */
+};
+
+
+static int open_semihosting(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	/* See if the file exists on semi-hosting.*/
+	result = io_dev_init(sh_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(sh_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using Semi-hosting IO\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+void plat_arm_io_setup(void)
+{
+	int io_result;
+
+	io_result = arm_io_setup();
+	if (io_result < 0) {
+		panic();
+	}
+
+	/* Register the additional IO devices on this platform */
+	io_result = register_io_dev_sh(&sh_dev_con);
+	if (io_result < 0) {
+		panic();
+	}
+
+	/* Open connections to devices and cache the handles */
+	io_result = io_dev_open(sh_dev_con, (uintptr_t)NULL, &sh_dev_handle);
+	if (io_result < 0) {
+		panic();
+	}
+}
+
+/*
+ * FVP_R provides semihosting as an alternative to load images
+ */
+int plat_arm_get_alt_image_source(unsigned int image_id, uintptr_t *dev_handle,
+				  uintptr_t *image_spec)
+{
+	int result = open_semihosting((const uintptr_t)&sh_file_spec[image_id]);
+
+	if (result == 0) {
+		*dev_handle = sh_dev_handle;
+		*image_spec = (uintptr_t)&sh_file_spec[image_id];
+	}
+
+	return result;
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_private.h b/plat/arm/board/fvp_r/fvp_r_private.h
new file mode 100644
index 0000000..48f6e89
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_private.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_PRIVATE_H
+#define FVP_R_PRIVATE_H
+
+#include <plat/arm/common/plat_arm.h>
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+
+void fvp_config_setup(void);
+
+void fvp_interconnect_init(void);
+void fvp_interconnect_enable(void);
+void fvp_interconnect_disable(void);
+void fvp_timer_init(void);
+
+#endif /* FVP_R_PRIVATE_H */
diff --git a/plat/arm/board/fvp_r/fvp_r_stack_protector.c b/plat/arm/board/fvp_r/fvp_r_stack_protector.c
new file mode 100644
index 0000000..5922a98
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_stack_protector.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <plat/common/platform.h>
+
+#define RANDOM_CANARY_VALUE ((u_register_t) 8092347823957523895ULL)
+
+u_register_t plat_get_stack_protector_canary(void)
+{
+	/*
+	 * Ideally, a random number should be returned instead of the
+	 * combination of a timer's value and a compile-time constant. As the
+	 * FVP_R does not have any random number generator, this is better than
+	 * nothing but not necessarily really secure.
+	 */
+	return RANDOM_CANARY_VALUE ^ read_cntpct_el0();
+}
+
diff --git a/plat/arm/board/fvp_r/fvp_r_trusted_boot.c b/plat/arm/board/fvp_r/fvp_r_trusted_boot.c
new file mode 100644
index 0000000..f304e3e
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_trusted_boot.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <lib/fconf/fconf.h>
+#include <lib/mmio.h>
+#include <tools_share/tbbr_oid.h>
+
+#include <plat/arm/common/fconf_nv_cntr_getter.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+
+/*
+ * Return the ROTPK hash in the following ASN.1 structure in DER format:
+ *
+ * AlgorithmIdentifier  ::=  SEQUENCE  {
+ *     algorithm         OBJECT IDENTIFIER,
+ *     parameters        ANY DEFINED BY algorithm OPTIONAL
+ * }
+ *
+ * DigestInfo ::= SEQUENCE {
+ *     digestAlgorithm   AlgorithmIdentifier,
+ *     digest            OCTET STRING
+ * }
+ */
+int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
+			unsigned int *flags)
+{
+	return arm_get_rotpk_info(cookie, key_ptr, key_len, flags);
+}
+
+/*
+ * Store a new non-volatile counter value.
+ *
+ * On some FVP_R versions, the non-volatile counters are read-only so this
+ * function will always fail.
+ *
+ * Return: 0 = success, Otherwise = error
+ */
+int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr)
+{
+	const char *oid;
+	uintptr_t nv_ctr_addr;
+
+	assert(cookie != NULL);
+
+	oid = (const char *)cookie;
+	if (strcmp(oid, TRUSTED_FW_NVCOUNTER_OID) == 0) {
+		nv_ctr_addr = FCONF_GET_PROPERTY(cot, nv_cntr_addr,
+						TRUSTED_NV_CTR_ID);
+	} else if (strcmp(oid, NON_TRUSTED_FW_NVCOUNTER_OID) == 0) {
+		nv_ctr_addr = FCONF_GET_PROPERTY(cot, nv_cntr_addr,
+						NON_TRUSTED_NV_CTR_ID);
+	} else {
+		return 1;
+	}
+
+	mmio_write_32(nv_ctr_addr, nv_ctr);
+
+	/*
+	 * If the FVP_R models a locked counter then its value cannot be updated
+	 * and the above write operation has been silently ignored.
+	 */
+	return (mmio_read_32(nv_ctr_addr) == nv_ctr) ? 0 : 1;
+}
diff --git a/plat/arm/board/fvp_r/include/plat.ld.S b/plat/arm/board/fvp_r/include/plat.ld.S
new file mode 100644
index 0000000..e91a5a0
--- /dev/null
+++ b/plat/arm/board/fvp_r/include/plat.ld.S
@@ -0,0 +1,11 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLAT_LD_S
+#define PLAT_LD_S
+
+#include <plat/arm/common/arm_tzc_dram.ld.S>
+
+#endif /* PLAT_LD_S */
diff --git a/plat/arm/board/fvp_r/include/platform_def.h b/plat/arm/board/fvp_r/include/platform_def.h
new file mode 100644
index 0000000..4586681
--- /dev/null
+++ b/plat/arm/board/fvp_r/include/platform_def.h
@@ -0,0 +1,242 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include "../fvp_r_def.h"
+#include <drivers/arm/tzc400.h>
+#include <lib/utils_def.h>
+#include <plat/arm/board/common/v2m_def.h>
+
+#include <plat/arm/common/arm_def.h>
+#include <plat/common/common_def.h>
+
+
+#define NO_EL3				1
+
+/* Required platform porting definitions */
+#define PLATFORM_CORE_COUNT  (U(FVP_R_CLUSTER_COUNT) * \
+			      U(FVP_R_MAX_CPUS_PER_CLUSTER) * \
+			      U(FVP_R_MAX_PE_PER_CPU))
+
+#define PLAT_NUM_PWR_DOMAINS (U(FVP_R_CLUSTER_COUNT) + \
+			      PLATFORM_CORE_COUNT + U(1))
+
+#define PLAT_MAX_PWR_LVL		ARM_PWR_LVL2
+
+/*
+ * Other platform porting definitions are provided by included headers
+ */
+
+/*
+ * Required ARM standard platform porting definitions
+ */
+#define PLAT_ARM_CLUSTER_COUNT		U(FVP_R_CLUSTER_COUNT)
+
+#define PLAT_ARM_DRAM1_BASE		ULL(0x0)
+
+#define PLAT_ARM_TRUSTED_ROM_BASE	UL(0x80000000)
+#define PLAT_ARM_TRUSTED_ROM_SIZE	UL(0x04000000)	/* 64 MB */
+
+#define PLAT_ARM_TRUSTED_SRAM_BASE	UL(0x84000000)
+#define PLAT_ARM_TRUSTED_SRAM_SIZE	UL(0x00040000)	/* 256 KB */
+
+#define PLAT_ARM_TRUSTED_DRAM_BASE	UL(0x86000000)
+#define PLAT_ARM_TRUSTED_DRAM_SIZE	UL(0x02000000)	/* 32 MB */
+
+/* virtual address used by dynamic mem_protect for chunk_base */
+#define PLAT_ARM_MEM_PROTEC_VA_FRAME	UL(0xc0000000)
+
+/* No SCP in FVP_R */
+#define PLAT_ARM_SCP_TZC_DRAM1_SIZE	UL(0x0)
+
+#define PLAT_ARM_DRAM2_BASE		ULL(0x080000000)
+#define PLAT_ARM_DRAM2_SIZE		UL(0x80000000)
+
+#define PLAT_HW_CONFIG_DTB_BASE		ULL(0x12000000)
+#define PLAT_HW_CONFIG_DTB_SIZE		ULL(0x8000)
+
+#define ARM_DTB_DRAM_NS			MAP_REGION_FLAT(		\
+					PLAT_HW_CONFIG_DTB_BASE,	\
+					PLAT_HW_CONFIG_DTB_SIZE,	\
+					MT_MEMORY | MT_RO | MT_NS)
+/*
+ * Load address of BL33 for this platform port
+ */
+#define PLAT_ARM_NS_IMAGE_BASE		(ARM_DRAM1_BASE + UL(0x8000000))
+
+/*
+ * PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if !USE_ROMLIB
+# define PLAT_ARM_MMAP_ENTRIES		11
+# define MAX_XLAT_TABLES		5
+#else
+# define PLAT_ARM_MMAP_ENTRIES		12
+# define MAX_XLAT_TABLES		6
+#endif
+
+/*
+ * These nominally reserve the last block of flash for PSCI MEM PROTECT flag,
+ * but no PSCI in FVP_R platform, so reserve nothing:
+ */
+#define PLAT_ARM_FLASH_IMAGE_BASE       V2M_FLASH0_BASE
+#define PLAT_ARM_FLASH_IMAGE_MAX_SIZE   0
+
+/*
+ * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
+ * plus a little space for growth.
+ */
+#define PLAT_ARM_MAX_BL1_RW_SIZE	UL(0xB000)
+
+/*
+ * PLAT_ARM_MAX_ROMLIB_RW_SIZE is define to use a full page
+ */
+
+#if USE_ROMLIB
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0x1000)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0xe000)
+#define FVP_R_BL2_ROMLIB_OPTIMIZATION UL(0x6000)
+#else
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0)
+#define FVP_R_BL2_ROMLIB_OPTIMIZATION UL(0)
+#endif
+
+/*
+ * PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
+ * little space for growth.
+ */
+#if TRUSTED_BOARD_BOOT
+#if COT_DESC_IN_DTB
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1E000) - FVP_R_BL2_ROMLIB_OPTIMIZATION)
+#else
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1D000) - FVP_R_BL2_ROMLIB_OPTIMIZATION)
+#endif
+#else
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x13000) - FVP_R_BL2_ROMLIB_OPTIMIZATION)
+#endif
+
+/*
+ * Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE is
+ * calculated using the current BL31 PROGBITS debug size plus the sizes of
+ * BL2 and BL1-RW
+ */
+#define PLAT_ARM_MAX_BL31_SIZE		UL(0x3D000)
+
+/*
+ * Size of cacheable stacks
+ */
+#if defined(IMAGE_BL1)
+# if TRUSTED_BOARD_BOOT
+#  define PLATFORM_STACK_SIZE		UL(0x1000)
+# else
+#  define PLATFORM_STACK_SIZE		UL(0x500)
+# endif
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+/* Reserve the last block of flash for PSCI MEM PROTECT flag */
+#define PLAT_ARM_FIP_BASE		V2M_FLASH0_BASE
+#define PLAT_ARM_FIP_MAX_SIZE		(V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+#define PLAT_ARM_NVM_BASE		V2M_FLASH0_BASE
+#define PLAT_ARM_NVM_SIZE		(V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+/*
+ * PL011 related constants
+ */
+#define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
+#define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ
+
+#define PLAT_ARM_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
+#define PLAT_ARM_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_RUN_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_RUN_UART_CLK_IN_HZ
+
+#define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
+#define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ
+
+/* CCI related constants */
+#define PLAT_FVP_R_CCI400_BASE		UL(0xac090000)
+#define PLAT_FVP_R_CCI400_CLUS0_SL_PORT	3
+#define PLAT_FVP_R_CCI400_CLUS1_SL_PORT	4
+
+/* CCI-500/CCI-550 on Base platform */
+#define PLAT_FVP_R_CCI5XX_BASE		UL(0xaa000000)
+#define PLAT_FVP_R_CCI5XX_CLUS0_SL_PORT	5
+#define PLAT_FVP_R_CCI5XX_CLUS1_SL_PORT	6
+
+/* CCN related constants. Only CCN 502 is currently supported */
+#define PLAT_ARM_CCN_BASE		UL(0xae000000)
+#define PLAT_ARM_CLUSTER_TO_CCN_ID_MAP	1, 5, 7, 11
+
+/* System timer related constants */
+#define PLAT_ARM_NSTIMER_FRAME_ID	U(1)
+
+/* Mailbox base address */
+#define PLAT_ARM_TRUSTED_MAILBOX_BASE	ARM_TRUSTED_SRAM_BASE
+
+
+/* TrustZone controller related constants
+ *
+ * Currently only filters 0 and 2 are connected on Base FVP_R.
+ * Filter 0 : CPU clusters (no access to DRAM by default)
+ * Filter 1 : not connected
+ * Filter 2 : LCDs (access to VRAM allowed by default)
+ * Filter 3 : not connected
+ * Programming unconnected filters will have no effect at the
+ * moment. These filter could, however, be connected in future.
+ * So care should be taken not to configure the unused filters.
+ *
+ * Allow only non-secure access to all DRAM to supported devices.
+ * Give access to the CPUs and Virtio. Some devices
+ * would normally use the default ID so allow that too.
+ */
+#define PLAT_ARM_TZC_BASE		UL(0xaa4a0000)
+#define PLAT_ARM_TZC_FILTERS		TZC_400_REGION_ATTR_FILTER_BIT(0)
+
+#define PLAT_ARM_TZC_NS_DEV_ACCESS	(				\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_DEFAULT)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_PCI)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_AP)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_VIRTIO)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_VIRTIO_OLD))
+
+/*
+ * GIC related constants to cater for both GICv2 and GICv3 instances of an
+ * FVP_R. They could be overridden at runtime in case the FVP_R implements the
+ * legacy VE memory map.
+ */
+#define PLAT_ARM_GICD_BASE		BASE_GICD_BASE
+#define PLAT_ARM_GICR_BASE		BASE_GICR_BASE
+#define PLAT_ARM_GICC_BASE		BASE_GICC_BASE
+
+#define PLAT_ARM_SP_IMAGE_STACK_BASE	(PLAT_SP_IMAGE_NS_BUF_BASE +	\
+					 PLAT_SP_IMAGE_NS_BUF_SIZE)
+
+#define PLAT_SP_PRI			PLAT_RAS_PRI
+
+/*
+ * Physical and virtual address space limits for MPU in AARCH64 & AARCH32 modes
+ */
+#ifdef __aarch64__
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
+#else
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
+#endif
+
+#define ARM_SOC_CONTINUATION_SHIFT	U(24)
+#define ARM_SOC_IDENTIFICATION_SHIFT	U(16)
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/arm/board/fvp_r/platform.mk b/plat/arm/board/fvp_r/platform.mk
new file mode 100644
index 0000000..1387ae7
--- /dev/null
+++ b/plat/arm/board/fvp_r/platform.mk
@@ -0,0 +1,131 @@
+#
+# Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Only aarch64 ARCH supported for FVP_R
+ARCH	:= aarch64
+
+# Override to exclude BL2, BL2U, BL31, and BL33 for FVP_R
+override NEED_BL2	:= no
+override NEED_BL2U	:= no
+override NEED_BL31	:= no
+override NEED_BL33	:= no
+
+# Default cluster count for FVP_R
+FVP_R_CLUSTER_COUNT	:= 2
+
+# Default number of CPUs per cluster on FVP_R
+FVP_R_MAX_CPUS_PER_CLUSTER	:= 4
+
+# Default number of threads per CPU on FVP_R
+FVP_R_MAX_PE_PER_CPU	:= 1
+
+# Need to revisit this for FVP_R
+FVP_R_DT_PREFIX		:= fvp-base-gicv3-psci
+
+# Pass FVP_R_CLUSTER_COUNT to the build system.
+$(eval $(call add_define,FVP_R_CLUSTER_COUNT))
+
+# Pass FVP_R_MAX_CPUS_PER_CLUSTER to the build system.
+$(eval $(call add_define,FVP_R_MAX_CPUS_PER_CLUSTER))
+
+# Pass FVP_R_MAX_PE_PER_CPU to the build system.
+$(eval $(call add_define,FVP_R_MAX_PE_PER_CPU))
+
+# Sanity check the cluster count and if FVP_R_CLUSTER_COUNT <= 2,
+# choose the CCI driver , else the CCN driver
+ifeq ($(FVP_R_CLUSTER_COUNT), 0)
+$(error "Incorrect cluster count specified for FVP_R port")
+else ifeq ($(FVP_R_CLUSTER_COUNT),$(filter $(FVP_R_CLUSTER_COUNT),1 2))
+FVP_R_INTERCONNECT_DRIVER := FVP_R_CCI
+else
+FVP_R_INTERCONNECT_DRIVER := FVP_R_CCN
+endif
+
+$(eval $(call add_define,FVP_R_INTERCONNECT_DRIVER))
+
+ifeq (${FVP_R_INTERCONNECT_DRIVER}, FVP_R_CCI)
+FVP_R_INTERCONNECT_SOURCES	:= 	drivers/arm/cci/cci.c
+else ifeq (${FVP_R_INTERCONNECT_DRIVER}, FVP_R_CCN)
+FVP_R_INTERCONNECT_SOURCES	:= 	drivers/arm/ccn/ccn.c		\
+					plat/arm/common/arm_ccn.c
+else
+$(error "Incorrect CCN driver chosen on FVP_R port")
+endif
+
+PLAT_INCLUDES		:=	-Iplat/arm/board/fvp_r/include
+
+PLAT_BL_COMMON_SOURCES	:=	plat/arm/board/fvp_r/fvp_r_common.c
+
+FVP_R_CPU_LIBS		:=	lib/cpus/${ARCH}/aem_generic.S
+
+# select a different set of CPU files, depending on whether we compile for
+# hardware assisted coherency cores or not
+ifeq (${HW_ASSISTED_COHERENCY}, 0)
+# Cores used without DSU
+#	FVP_R_CPU_LIBS	+=	lib/cpus/aarch64/fvp_r.S
+else
+# Cores used with DSU only
+#	FVP_R_CPU_LIBS	+=	lib/cpus/aarch64/fvp_r.S
+endif
+
+BL1_SOURCES		+=	drivers/arm/sp805/sp805.c			\
+				drivers/delay_timer/delay_timer.c		\
+				drivers/io/io_semihosting.c			\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/${ARCH}/semihosting_call.S	\
+				plat/arm/board/fvp_r/fvp_r_helpers.S		\
+				plat/arm/board/fvp_r/fvp_r_bl1_setup.c		\
+				plat/arm/board/fvp_r/fvp_r_err.c		\
+				plat/arm/board/fvp_r/fvp_r_io_storage.c		\
+				${FVP_R_CPU_LIBS}				\
+				${FVP_R_INTERCONNECT_SOURCES}
+
+ifeq (${USE_SP804_TIMER},1)
+BL1_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+else
+BL1_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c
+endif
+
+# Enable Activity Monitor Unit extensions by default
+ENABLE_AMU			:=	1
+
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+PLAT_BL_COMMON_SOURCES	+=	plat/arm/board/fvp_r/fvp_r_stack_protector.c
+endif
+
+ifeq (${ARCH},aarch32)
+    NEED_BL32 := yes
+endif
+
+ifneq (${BL2_AT_EL3}, 0)
+    override BL1_SOURCES =
+endif
+
+# Add the FDT_SOURCES and options for Dynamic Config (only for Unix env)
+ifdef UNIX_MK
+FVP_R_HW_CONFIG_DTS	:=	fdts/${FVP_R_DT_PREFIX}.dts
+FDT_SOURCES		+=	$(addprefix plat/arm/board/fvp_r/fdts/,	\
+					${PLAT}_fw_config.dts		\
+					${PLAT}_nt_fw_config.dts	\
+				)
+
+FVP_R_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FVP_R_NT_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb
+
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_R_FW_CONFIG},--fw-config,${FVP_R_FW_CONFIG}))
+# Add the NT_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_R_NT_FW_CONFIG},--nt-fw-config,${FVP_R_NT_FW_CONFIG}))
+
+FDT_SOURCES		+=	${FVP_R_HW_CONFIG_DTS}
+$(eval FVP_R_HW_CONFIG	:=	${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(FVP_R_HW_CONFIG_DTS)))
+
+# Add the HW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_R_HW_CONFIG},--hw-config,${FVP_R_HW_CONFIG}))
+endif
+
+include plat/arm/board/common/board_common.mk
+include plat/arm/common/arm_common.mk