Fix RST rendering typos and broken links
Change-Id: I40631d9c1d99e24311d158cec5a47b433d6fe328
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
diff --git a/docs/user-guide.rst b/docs/user-guide.rst
index e989a56..efc9acb 100644
--- a/docs/user-guide.rst
+++ b/docs/user-guide.rst
@@ -218,22 +218,22 @@
To sum up, 3 images must be built out of the TF-A Tests repository in order to
test the TF-A Firmware Update feature:
- - ``ns_bl1u.bin``
- - ``ns_bl2u.bin``
- - ``tftf.bin``
+- ``ns_bl1u.bin``
+- ``ns_bl2u.bin``
+- ``tftf.bin``
Once that's done, they must be combined in the right way.
- - ``ns_bl1u.bin`` is a standalone image and does not require any further
- processing.
+- ``ns_bl1u.bin`` is a standalone image and does not require any further
+ processing.
- - ``ns_bl2u.bin`` must be injected into the ``FWU_FIP`` image. This might be
- achieved by setting ``NS_BL2U=ns_bl2u.bin`` when building the ``FWU_FIP``
- image out of the TF-A repository. Please refer to the section `Building FIP
- images with support for Trusted Board Boot`_ in the TF-A User Guide.
+- ``ns_bl2u.bin`` must be injected into the ``FWU_FIP`` image. This might be
+ achieved by setting ``NS_BL2U=ns_bl2u.bin`` when building the ``FWU_FIP``
+ image out of the TF-A repository. Please refer to the section `Building FIP
+ images with support for Trusted Board Boot`_ in the TF-A User Guide.
- - ``tftf.bin`` must be injected in the standard FIP image, as explained
- in section `TFTF test image`_.
+- ``tftf.bin`` must be injected in the standard FIP image, as explained
+ in section `TFTF test image`_.
Additionally, on Juno platform, the FWU FIP must contain a ``SCP_BL2U`` image.
This image can simply be a copy of the standard ``SCP_BL2`` image if no specific
@@ -327,14 +327,14 @@
- ``ENABLE_ASSERTIONS``: This option controls whether calls to ``assert()`` are
compiled out.
- - For debug builds, this option defaults to 1, and calls to ``assert()`` are
- compiled in.
- - For release builds, this option defaults to 0 and calls to ``assert()``
- are compiled out.
+ - For debug builds, this option defaults to 1, and calls to ``assert()`` are
+ compiled in.
+ - For release builds, this option defaults to 0 and calls to ``assert()``
+ are compiled out.
- This option can be set independently of ``DEBUG``. It can also be used to
- hide any auxiliary code that is only required for the assertion and does not
- fit in the assertion itself.
+ This option can be set independently of ``DEBUG``. It can also be used to
+ hide any auxiliary code that is only required for the assertion and does not
+ fit in the assertion itself.
- ``LOG_LEVEL``: Chooses the log level, which controls the amount of console log
output compiled into the build. This should be one of the following:
@@ -453,11 +453,12 @@
- ``BL1`` firmware image;
- ``FIP`` image containing the following images:
- - ``BL2``;
- - ``SCP_BL2`` if required by the platform (e.g. Juno);
- - ``BL31``;
- - ``BL32`` (optional);
- - ``tftf.bin`` (standing as the BL33 image).
+
+ - ``BL2``;
+ - ``SCP_BL2`` if required by the platform (e.g. Juno);
+ - ``BL31``;
+ - ``BL32`` (optional);
+ - ``tftf.bin`` (standing as the BL33 image).
Running the FWU tests
`````````````````````