diff --git a/include/mbedtls/mbedtls_config.h b/include/mbedtls/mbedtls_config.h
new file mode 100644
index 0000000..5212fb3
--- /dev/null
+++ b/include/mbedtls/mbedtls_config.h
@@ -0,0 +1,3258 @@
+/**
+ * \file mbedtls_config.h
+ *
+ * \brief Configuration options (set of defines)
+ *
+ *  This set of compile-time options may be used to enable
+ *  or disable features selectively, and reduce the global
+ *  memory footprint.
+ */
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/**
+ * \name SECTION: System support
+ *
+ * This section sets system specific settings.
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_HAVE_ASM
+ *
+ * The compiler has support for asm().
+ *
+ * Requires support for asm() in compiler.
+ *
+ * Used in:
+ *      library/aria.c
+ *      library/bn_mul.h
+ *
+ * Required by:
+ *      MBEDTLS_AESNI_C
+ *      MBEDTLS_PADLOCK_C
+ *
+ * Comment to disable the use of assembly code.
+ */
+#define MBEDTLS_HAVE_ASM
+
+/**
+ * \def MBEDTLS_NO_UDBL_DIVISION
+ *
+ * The platform lacks support for double-width integer division (64-bit
+ * division on a 32-bit platform, 128-bit division on a 64-bit platform).
+ *
+ * Used in:
+ *      include/mbedtls/bignum.h
+ *      library/bignum.c
+ *
+ * The bignum code uses double-width division to speed up some operations.
+ * Double-width division is often implemented in software that needs to
+ * be linked with the program. The presence of a double-width integer
+ * type is usually detected automatically through preprocessor macros,
+ * but the automatic detection cannot know whether the code needs to
+ * and can be linked with an implementation of division for that type.
+ * By default division is assumed to be usable if the type is present.
+ * Uncomment this option to prevent the use of double-width division.
+ *
+ * Note that division for the native integer type is always required.
+ * Furthermore, a 64-bit type is always required even on a 32-bit
+ * platform, but it need not support multiplication or division. In some
+ * cases it is also desirable to disable some double-width operations. For
+ * example, if double-width division is implemented in software, disabling
+ * it can reduce code size in some embedded targets.
+ */
+//#define MBEDTLS_NO_UDBL_DIVISION
+
+/**
+ * \def MBEDTLS_NO_64BIT_MULTIPLICATION
+ *
+ * The platform lacks support for 32x32 -> 64-bit multiplication.
+ *
+ * Used in:
+ *      library/poly1305.c
+ *
+ * Some parts of the library may use multiplication of two unsigned 32-bit
+ * operands with a 64-bit result in order to speed up computations. On some
+ * platforms, this is not available in hardware and has to be implemented in
+ * software, usually in a library provided by the toolchain.
+ *
+ * Sometimes it is not desirable to have to link to that library. This option
+ * removes the dependency of that library on platforms that lack a hardware
+ * 64-bit multiplier by embedding a software implementation in Mbed TLS.
+ *
+ * Note that depending on the compiler, this may decrease performance compared
+ * to using the library function provided by the toolchain.
+ */
+//#define MBEDTLS_NO_64BIT_MULTIPLICATION
+
+/**
+ * \def MBEDTLS_HAVE_SSE2
+ *
+ * CPU supports SSE2 instruction set.
+ *
+ * Uncomment if the CPU supports SSE2 (IA-32 specific).
+ */
+//#define MBEDTLS_HAVE_SSE2
+
+/**
+ * \def MBEDTLS_HAVE_TIME
+ *
+ * System has time.h and time().
+ * The time does not need to be correct, only time differences are used,
+ * by contrast with MBEDTLS_HAVE_TIME_DATE
+ *
+ * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT,
+ * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and
+ * MBEDTLS_PLATFORM_STD_TIME.
+ *
+ * Comment if your system does not support time functions
+ */
+#define MBEDTLS_HAVE_TIME
+
+/**
+ * \def MBEDTLS_HAVE_TIME_DATE
+ *
+ * System has time.h, time(), and an implementation for
+ * mbedtls_platform_gmtime_r() (see below).
+ * The time needs to be correct (not necessarily very accurate, but at least
+ * the date should be correct). This is used to verify the validity period of
+ * X.509 certificates.
+ *
+ * Comment if your system does not have a correct clock.
+ *
+ * \note mbedtls_platform_gmtime_r() is an abstraction in platform_util.h that
+ * behaves similarly to the gmtime_r() function from the C standard. Refer to
+ * the documentation for mbedtls_platform_gmtime_r() for more information.
+ *
+ * \note It is possible to configure an implementation for
+ * mbedtls_platform_gmtime_r() at compile-time by using the macro
+ * MBEDTLS_PLATFORM_GMTIME_R_ALT.
+ */
+#define MBEDTLS_HAVE_TIME_DATE
+
+/**
+ * \def MBEDTLS_PLATFORM_MEMORY
+ *
+ * Enable the memory allocation layer.
+ *
+ * By default mbed TLS uses the system-provided calloc() and free().
+ * This allows different allocators (self-implemented or provided) to be
+ * provided to the platform abstraction layer.
+ *
+ * Enabling MBEDTLS_PLATFORM_MEMORY without the
+ * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide
+ * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and
+ * free() function pointer at runtime.
+ *
+ * Enabling MBEDTLS_PLATFORM_MEMORY and specifying
+ * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the
+ * alternate function at compile time.
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *
+ * Enable this layer to allow use of alternative memory allocators.
+ */
+//#define MBEDTLS_PLATFORM_MEMORY
+
+/**
+ * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
+ *
+ * Do not assign standard functions in the platform layer (e.g. calloc() to
+ * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF)
+ *
+ * This makes sure there are no linking errors on platforms that do not support
+ * these functions. You will HAVE to provide alternatives, either at runtime
+ * via the platform_set_xxx() functions or at compile time by setting
+ * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a
+ * MBEDTLS_PLATFORM_XXX_MACRO.
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *
+ * Uncomment to prevent default assignment of standard functions in the
+ * platform layer.
+ */
+//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
+
+/**
+ * \def MBEDTLS_PLATFORM_EXIT_ALT
+ *
+ * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the
+ * function in the platform abstraction layer.
+ *
+ * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will
+ * provide a function "mbedtls_platform_set_printf()" that allows you to set an
+ * alternative printf function pointer.
+ *
+ * All these define require MBEDTLS_PLATFORM_C to be defined!
+ *
+ * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows;
+ * it will be enabled automatically by check_config.h
+ *
+ * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as
+ * MBEDTLS_PLATFORM_XXX_MACRO!
+ *
+ * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME
+ *
+ * Uncomment a macro to enable alternate implementation of specific base
+ * platform function
+ */
+//#define MBEDTLS_PLATFORM_EXIT_ALT
+//#define MBEDTLS_PLATFORM_TIME_ALT
+//#define MBEDTLS_PLATFORM_FPRINTF_ALT
+//#define MBEDTLS_PLATFORM_PRINTF_ALT
+//#define MBEDTLS_PLATFORM_SNPRINTF_ALT
+//#define MBEDTLS_PLATFORM_VSNPRINTF_ALT
+//#define MBEDTLS_PLATFORM_NV_SEED_ALT
+//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT
+
+/**
+ * \def MBEDTLS_DEPRECATED_WARNING
+ *
+ * Mark deprecated functions and features so that they generate a warning if
+ * used. Functionality deprecated in one version will usually be removed in the
+ * next version. You can enable this to help you prepare the transition to a
+ * new major version by making sure your code is not using this functionality.
+ *
+ * This only works with GCC and Clang. With other compilers, you may want to
+ * use MBEDTLS_DEPRECATED_REMOVED
+ *
+ * Uncomment to get warnings on using deprecated functions and features.
+ */
+//#define MBEDTLS_DEPRECATED_WARNING
+
+/**
+ * \def MBEDTLS_DEPRECATED_REMOVED
+ *
+ * Remove deprecated functions and features so that they generate an error if
+ * used. Functionality deprecated in one version will usually be removed in the
+ * next version. You can enable this to help you prepare the transition to a
+ * new major version by making sure your code is not using this functionality.
+ *
+ * Uncomment to get errors on using deprecated functions and features.
+ */
+//#define MBEDTLS_DEPRECATED_REMOVED
+
+/* \} name SECTION: System support */
+
+/**
+ * \name SECTION: mbed TLS feature support
+ *
+ * This section sets support for features that are or are not needed
+ * within the modules that are enabled.
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_TIMING_ALT
+ *
+ * Uncomment to provide your own alternate implementation for
+ * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay()
+ *
+ * Only works if you have MBEDTLS_TIMING_C enabled.
+ *
+ * You will need to provide a header "timing_alt.h" and an implementation at
+ * compile time.
+ */
+//#define MBEDTLS_TIMING_ALT
+
+/**
+ * \def MBEDTLS_AES_ALT
+ *
+ * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your
+ * alternate core implementation of a symmetric crypto, an arithmetic or hash
+ * module (e.g. platform specific assembly optimized implementations). Keep
+ * in mind that the function prototypes should remain the same.
+ *
+ * This replaces the whole module. If you only want to replace one of the
+ * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags.
+ *
+ * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer
+ * provide the "struct mbedtls_aes_context" definition and omit the base
+ * function declarations and implementations. "aes_alt.h" will be included from
+ * "aes.h" to include the new function definitions.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * module.
+ *
+ * \warning   MD5, DES and SHA-1 are considered weak and their
+ *            use constitutes a security risk. If possible, we recommend
+ *            avoiding dependencies on them, and considering stronger message
+ *            digests and ciphers instead.
+ *
+ */
+//#define MBEDTLS_AES_ALT
+//#define MBEDTLS_ARIA_ALT
+//#define MBEDTLS_CAMELLIA_ALT
+//#define MBEDTLS_CCM_ALT
+//#define MBEDTLS_CHACHA20_ALT
+//#define MBEDTLS_CHACHAPOLY_ALT
+//#define MBEDTLS_CMAC_ALT
+//#define MBEDTLS_DES_ALT
+//#define MBEDTLS_DHM_ALT
+//#define MBEDTLS_ECJPAKE_ALT
+//#define MBEDTLS_GCM_ALT
+//#define MBEDTLS_NIST_KW_ALT
+//#define MBEDTLS_MD5_ALT
+//#define MBEDTLS_POLY1305_ALT
+//#define MBEDTLS_RIPEMD160_ALT
+//#define MBEDTLS_RSA_ALT
+//#define MBEDTLS_SHA1_ALT
+//#define MBEDTLS_SHA256_ALT
+//#define MBEDTLS_SHA512_ALT
+
+/*
+ * When replacing the elliptic curve module, pleace consider, that it is
+ * implemented with two .c files:
+ *      - ecp.c
+ *      - ecp_curves.c
+ * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT
+ * macros as described above. The only difference is that you have to make sure
+ * that you provide functionality for both .c files.
+ */
+//#define MBEDTLS_ECP_ALT
+
+/**
+ * \def MBEDTLS_SHA256_PROCESS_ALT
+ *
+ * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you
+ * alternate core implementation of symmetric crypto or hash function. Keep in
+ * mind that function prototypes should remain the same.
+ *
+ * This replaces only one function. The header file from mbed TLS is still
+ * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags.
+ *
+ * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will
+ * no longer provide the mbedtls_sha1_process() function, but it will still provide
+ * the other function (using your mbedtls_sha1_process() function) and the definition
+ * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible
+ * with this definition.
+ *
+ * \note If you use the AES_xxx_ALT macros, then it is recommended to also set
+ *       MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES
+ *       tables.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * function.
+ *
+ * \warning   MD5, DES and SHA-1 are considered weak and their use
+ *            constitutes a security risk. If possible, we recommend avoiding
+ *            dependencies on them, and considering stronger message digests
+ *            and ciphers instead.
+ *
+ * \warning   If both MBEDTLS_ECDSA_SIGN_ALT and MBEDTLS_ECDSA_DETERMINISTIC are
+ *            enabled, then the deterministic ECDH signature functions pass the
+ *            the static HMAC-DRBG as RNG to mbedtls_ecdsa_sign(). Therefore
+ *            alternative implementations should use the RNG only for generating
+ *            the ephemeral key and nothing else. If this is not possible, then
+ *            MBEDTLS_ECDSA_DETERMINISTIC should be disabled and an alternative
+ *            implementation should be provided for mbedtls_ecdsa_sign_det_ext().
+ *
+ */
+//#define MBEDTLS_MD5_PROCESS_ALT
+//#define MBEDTLS_RIPEMD160_PROCESS_ALT
+//#define MBEDTLS_SHA1_PROCESS_ALT
+//#define MBEDTLS_SHA256_PROCESS_ALT
+//#define MBEDTLS_SHA512_PROCESS_ALT
+//#define MBEDTLS_DES_SETKEY_ALT
+//#define MBEDTLS_DES_CRYPT_ECB_ALT
+//#define MBEDTLS_DES3_CRYPT_ECB_ALT
+//#define MBEDTLS_AES_SETKEY_ENC_ALT
+//#define MBEDTLS_AES_SETKEY_DEC_ALT
+//#define MBEDTLS_AES_ENCRYPT_ALT
+//#define MBEDTLS_AES_DECRYPT_ALT
+//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT
+//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT
+//#define MBEDTLS_ECDSA_VERIFY_ALT
+//#define MBEDTLS_ECDSA_SIGN_ALT
+//#define MBEDTLS_ECDSA_GENKEY_ALT
+
+/**
+ * \def MBEDTLS_ECP_INTERNAL_ALT
+ *
+ * Expose a part of the internal interface of the Elliptic Curve Point module.
+ *
+ * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your
+ * alternative core implementation of elliptic curve arithmetic. Keep in mind
+ * that function prototypes should remain the same.
+ *
+ * This partially replaces one function. The header file from mbed TLS is still
+ * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation
+ * is still present and it is used for group structures not supported by the
+ * alternative.
+ *
+ * The original implementation can in addition be removed by setting the
+ * MBEDTLS_ECP_NO_FALLBACK option, in which case any function for which the
+ * corresponding MBEDTLS_ECP__FUNCTION_NAME__ALT macro is defined will not be
+ * able to fallback to curves not supported by the alternative implementation.
+ *
+ * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT
+ * and implementing the following functions:
+ *      unsigned char mbedtls_internal_ecp_grp_capable(
+ *          const mbedtls_ecp_group *grp )
+ *      int  mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp )
+ *      void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp )
+ * The mbedtls_internal_ecp_grp_capable function should return 1 if the
+ * replacement functions implement arithmetic for the given group and 0
+ * otherwise.
+ * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_free are
+ * called before and after each point operation and provide an opportunity to
+ * implement optimized set up and tear down instructions.
+ *
+ * Example: In case you set MBEDTLS_ECP_INTERNAL_ALT and
+ * MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac()
+ * function, but will use your mbedtls_internal_ecp_double_jac() if the group
+ * for the operation is supported by your implementation (i.e. your
+ * mbedtls_internal_ecp_grp_capable() function returns 1 for this group). If the
+ * group is not supported by your implementation, then the original mbed TLS
+ * implementation of ecp_double_jac() is used instead, unless this fallback
+ * behaviour is disabled by setting MBEDTLS_ECP_NO_FALLBACK (in which case
+ * ecp_double_jac() will return MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE).
+ *
+ * The function prototypes and the definition of mbedtls_ecp_group and
+ * mbedtls_ecp_point will not change based on MBEDTLS_ECP_INTERNAL_ALT, so your
+ * implementation of mbedtls_internal_ecp__function_name__ must be compatible
+ * with their definitions.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * function.
+ */
+/* Required for all the functions in this section */
+//#define MBEDTLS_ECP_INTERNAL_ALT
+/* Turn off software fallback for curves not supported in hardware */
+//#define MBEDTLS_ECP_NO_FALLBACK
+/* Support for Weierstrass curves with Jacobi representation */
+//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT
+//#define MBEDTLS_ECP_ADD_MIXED_ALT
+//#define MBEDTLS_ECP_DOUBLE_JAC_ALT
+//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT
+//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT
+/* Support for curves with Montgomery arithmetic */
+//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT
+//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT
+//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT
+
+/**
+ * \def MBEDTLS_ENTROPY_HARDWARE_ALT
+ *
+ * Uncomment this macro to let mbed TLS use your own implementation of a
+ * hardware entropy collector.
+ *
+ * Your function must be called \c mbedtls_hardware_poll(), have the same
+ * prototype as declared in library/entropy_poll.h, and accept NULL as first
+ * argument.
+ *
+ * Uncomment to use your own hardware entropy collector.
+ */
+//#define MBEDTLS_ENTROPY_HARDWARE_ALT
+
+/**
+ * \def MBEDTLS_AES_ROM_TABLES
+ *
+ * Use precomputed AES tables stored in ROM.
+ *
+ * Uncomment this macro to use precomputed AES tables stored in ROM.
+ * Comment this macro to generate AES tables in RAM at runtime.
+ *
+ * Tradeoff: Using precomputed ROM tables reduces RAM usage by ~8kb
+ * (or ~2kb if \c MBEDTLS_AES_FEWER_TABLES is used) and reduces the
+ * initialization time before the first AES operation can be performed.
+ * It comes at the cost of additional ~8kb ROM use (resp. ~2kb if \c
+ * MBEDTLS_AES_FEWER_TABLES below is used), and potentially degraded
+ * performance if ROM access is slower than RAM access.
+ *
+ * This option is independent of \c MBEDTLS_AES_FEWER_TABLES.
+ *
+ */
+//#define MBEDTLS_AES_ROM_TABLES
+
+/**
+ * \def MBEDTLS_AES_FEWER_TABLES
+ *
+ * Use less ROM/RAM for AES tables.
+ *
+ * Uncommenting this macro omits 75% of the AES tables from
+ * ROM / RAM (depending on the value of \c MBEDTLS_AES_ROM_TABLES)
+ * by computing their values on the fly during operations
+ * (the tables are entry-wise rotations of one another).
+ *
+ * Tradeoff: Uncommenting this reduces the RAM / ROM footprint
+ * by ~6kb but at the cost of more arithmetic operations during
+ * runtime. Specifically, one has to compare 4 accesses within
+ * different tables to 4 accesses with additional arithmetic
+ * operations within the same table. The performance gain/loss
+ * depends on the system and memory details.
+ *
+ * This option is independent of \c MBEDTLS_AES_ROM_TABLES.
+ *
+ */
+//#define MBEDTLS_AES_FEWER_TABLES
+
+/**
+ * \def MBEDTLS_CAMELLIA_SMALL_MEMORY
+ *
+ * Use less ROM for the Camellia implementation (saves about 768 bytes).
+ *
+ * Uncomment this macro to use less memory for Camellia.
+ */
+//#define MBEDTLS_CAMELLIA_SMALL_MEMORY
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CBC
+ *
+ * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CBC
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CFB
+ *
+ * Enable Cipher Feedback mode (CFB) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CFB
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CTR
+ *
+ * Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CTR
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_OFB
+ *
+ * Enable Output Feedback mode (OFB) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_OFB
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_XTS
+ *
+ * Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES.
+ */
+#define MBEDTLS_CIPHER_MODE_XTS
+
+/**
+ * \def MBEDTLS_CIPHER_NULL_CIPHER
+ *
+ * Enable NULL cipher.
+ * Warning: Only do so when you know what you are doing. This allows for
+ * encryption or channels without any security!
+ *
+ * To enable the following ciphersuites:
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA
+ *      MBEDTLS_TLS_RSA_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_NULL_SHA
+ *      MBEDTLS_TLS_RSA_WITH_NULL_MD5
+ *      MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA
+ *      MBEDTLS_TLS_PSK_WITH_NULL_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_NULL_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_NULL_SHA
+ *
+ * Uncomment this macro to enable the NULL cipher and ciphersuites
+ */
+//#define MBEDTLS_CIPHER_NULL_CIPHER
+
+/**
+ * \def MBEDTLS_CIPHER_PADDING_PKCS7
+ *
+ * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for
+ * specific padding modes in the cipher layer with cipher modes that support
+ * padding (e.g. CBC)
+ *
+ * If you disable all padding modes, only full blocks can be used with CBC.
+ *
+ * Enable padding modes in the cipher layer.
+ */
+#define MBEDTLS_CIPHER_PADDING_PKCS7
+#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS
+#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
+#define MBEDTLS_CIPHER_PADDING_ZEROS
+
+/** \def MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
+ *
+ * Uncomment this macro to use a 128-bit key in the CTR_DRBG module.
+ * By default, CTR_DRBG uses a 256-bit key.
+ */
+//#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
+
+/**
+ * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
+ *
+ * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
+ * module.  By default all supported curves are enabled.
+ *
+ * Comment macros to disable the curve and functions for it
+ */
+/* Short Weierstrass curves (supporting ECP, ECDH, ECDSA) */
+#define MBEDTLS_ECP_DP_SECP192R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP224R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP384R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP521R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP192K1_ENABLED
+#define MBEDTLS_ECP_DP_SECP224K1_ENABLED
+#define MBEDTLS_ECP_DP_SECP256K1_ENABLED
+#define MBEDTLS_ECP_DP_BP256R1_ENABLED
+#define MBEDTLS_ECP_DP_BP384R1_ENABLED
+#define MBEDTLS_ECP_DP_BP512R1_ENABLED
+/* Montgomery curves (supporting ECP) */
+#define MBEDTLS_ECP_DP_CURVE25519_ENABLED
+#define MBEDTLS_ECP_DP_CURVE448_ENABLED
+
+/**
+ * \def MBEDTLS_ECP_NIST_OPTIM
+ *
+ * Enable specific 'modulo p' routines for each NIST prime.
+ * Depending on the prime and architecture, makes operations 4 to 8 times
+ * faster on the corresponding curve.
+ *
+ * Comment this macro to disable NIST curves optimisation.
+ */
+#define MBEDTLS_ECP_NIST_OPTIM
+
+/**
+ * \def MBEDTLS_ECP_RESTARTABLE
+ *
+ * Enable "non-blocking" ECC operations that can return early and be resumed.
+ *
+ * This allows various functions to pause by returning
+ * #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module,
+ * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in
+ * order to further progress and eventually complete their operation. This is
+ * controlled through mbedtls_ecp_set_max_ops() which limits the maximum
+ * number of ECC operations a function may perform before pausing; see
+ * mbedtls_ecp_set_max_ops() for more information.
+ *
+ * This is useful in non-threaded environments if you want to avoid blocking
+ * for too long on ECC (and, hence, X.509 or SSL/TLS) operations.
+ *
+ * Uncomment this macro to enable restartable ECC computations.
+ *
+ * \note  This option only works with the default software implementation of
+ *        elliptic curve functionality. It is incompatible with
+ *        MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT, MBEDTLS_ECDSA_XXX_ALT.
+ */
+//#define MBEDTLS_ECP_RESTARTABLE
+
+/**
+ * \def MBEDTLS_ECDSA_DETERMINISTIC
+ *
+ * Enable deterministic ECDSA (RFC 6979).
+ * Standard ECDSA is "fragile" in the sense that lack of entropy when signing
+ * may result in a compromise of the long-term signing key. This is avoided by
+ * the deterministic variant.
+ *
+ * Requires: MBEDTLS_HMAC_DRBG_C, MBEDTLS_ECDSA_C
+ *
+ * Comment this macro to disable deterministic ECDSA.
+ */
+#define MBEDTLS_ECDSA_DETERMINISTIC
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
+ *
+ * Enable the PSK based ciphersuite modes in SSL / TLS.
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+ *
+ * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_DHM_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *
+ * \warning    Using DHE constitutes a security risk as it
+ *             is not possible to validate custom DH parameters.
+ *             If possible, it is recommended users should consider
+ *             preferring other methods of key exchange.
+ *             See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+ *
+ * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+ *
+ * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+ *
+ * Enable the RSA-only based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ */
+#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+ *
+ * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *
+ * \warning    Using DHE constitutes a security risk as it
+ *             is not possible to validate custom DH parameters.
+ *             If possible, it is recommended users should consider
+ *             preferring other methods of key exchange.
+ *             See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+ *
+ * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ *           MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+ *
+ * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C,
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+ *
+ * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+ *
+ * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+ *
+ * Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
+ *
+ * \warning This is currently experimental. EC J-PAKE support is based on the
+ * Thread v1.0.0 specification; incompatible changes to the specification
+ * might still happen. For this reason, this is disabled by default.
+ *
+ * Requires: MBEDTLS_ECJPAKE_C
+ *           MBEDTLS_SHA256_C
+ *           MBEDTLS_ECP_DP_SECP256R1_ENABLED
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
+ */
+//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+
+/**
+ * \def MBEDTLS_PK_PARSE_EC_EXTENDED
+ *
+ * Enhance support for reading EC keys using variants of SEC1 not allowed by
+ * RFC 5915 and RFC 5480.
+ *
+ * Currently this means parsing the SpecifiedECDomain choice of EC
+ * parameters (only known groups are supported, not arbitrary domains, to
+ * avoid validation issues).
+ *
+ * Disable if you only need to support RFC 5915 + 5480 key formats.
+ */
+#define MBEDTLS_PK_PARSE_EC_EXTENDED
+
+/**
+ * \def MBEDTLS_ERROR_STRERROR_DUMMY
+ *
+ * Enable a dummy error function to make use of mbedtls_strerror() in
+ * third party libraries easier when MBEDTLS_ERROR_C is disabled
+ * (no effect when MBEDTLS_ERROR_C is enabled).
+ *
+ * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're
+ * not using mbedtls_strerror() or error_strerror() in your application.
+ *
+ * Disable if you run into name conflicts and want to really remove the
+ * mbedtls_strerror()
+ */
+#define MBEDTLS_ERROR_STRERROR_DUMMY
+
+/**
+ * \def MBEDTLS_GENPRIME
+ *
+ * Enable the prime-number generation code.
+ *
+ * Requires: MBEDTLS_BIGNUM_C
+ */
+#define MBEDTLS_GENPRIME
+
+/**
+ * \def MBEDTLS_FS_IO
+ *
+ * Enable functions that use the filesystem.
+ */
+#define MBEDTLS_FS_IO
+
+/**
+ * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+ *
+ * Do not add default entropy sources in mbedtls_entropy_init().
+ *
+ * This is useful to have more control over the added entropy sources in an
+ * application.
+ *
+ * Uncomment this macro to prevent loading of default entropy functions.
+ */
+//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+
+/**
+ * \def MBEDTLS_NO_PLATFORM_ENTROPY
+ *
+ * Do not use built-in platform entropy functions.
+ * This is useful if your platform does not support
+ * standards like the /dev/urandom or Windows CryptoAPI.
+ *
+ * Uncomment this macro to disable the built-in platform entropy functions.
+ */
+//#define MBEDTLS_NO_PLATFORM_ENTROPY
+
+/**
+ * \def MBEDTLS_ENTROPY_FORCE_SHA256
+ *
+ * Force the entropy accumulator to use a SHA-256 accumulator instead of the
+ * default SHA-512 based one (if both are available).
+ *
+ * Requires: MBEDTLS_SHA256_C
+ *
+ * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
+ * if you have performance concerns.
+ *
+ * This option is only useful if both MBEDTLS_SHA256_C and
+ * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used.
+ */
+//#define MBEDTLS_ENTROPY_FORCE_SHA256
+
+/**
+ * \def MBEDTLS_ENTROPY_NV_SEED
+ *
+ * Enable the non-volatile (NV) seed file-based entropy source.
+ * (Also enables the NV seed read/write functions in the platform layer)
+ *
+ * This is crucial (if not required) on systems that do not have a
+ * cryptographic entropy source (in hardware or kernel) available.
+ *
+ * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C
+ *
+ * \note The read/write functions that are used by the entropy source are
+ *       determined in the platform layer, and can be modified at runtime and/or
+ *       compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used.
+ *
+ * \note If you use the default implementation functions that read a seedfile
+ *       with regular fopen(), please make sure you make a seedfile with the
+ *       proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at
+ *       least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from
+ *       and written to or you will get an entropy source error! The default
+ *       implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE
+ *       bytes from the file.
+ *
+ * \note The entropy collector will write to the seed file before entropy is
+ *       given to an external source, to update it.
+ */
+//#define MBEDTLS_ENTROPY_NV_SEED
+
+/* MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+ *
+ * Enable key identifiers that encode a key owner identifier.
+ *
+ * The owner of a key is identified by a value of type ::mbedtls_key_owner_id_t
+ * which is currently hard-coded to be int32_t.
+ *
+ * Note that this option is meant for internal use only and may be removed
+ * without notice. It is incompatible with MBEDTLS_USE_PSA_CRYPTO.
+ */
+//#define MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+
+/**
+ * \def MBEDTLS_MEMORY_DEBUG
+ *
+ * Enable debugging of buffer allocator memory issues. Automatically prints
+ * (to stderr) all (fatal) messages on memory allocation issues. Enables
+ * function for 'debug output' of allocated memory.
+ *
+ * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *
+ * Uncomment this macro to let the buffer allocator print out error messages.
+ */
+//#define MBEDTLS_MEMORY_DEBUG
+
+/**
+ * \def MBEDTLS_MEMORY_BACKTRACE
+ *
+ * Include backtrace information with each allocated block.
+ *
+ * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *           GLIBC-compatible backtrace() an backtrace_symbols() support
+ *
+ * Uncomment this macro to include backtrace information
+ */
+//#define MBEDTLS_MEMORY_BACKTRACE
+
+/**
+ * \def MBEDTLS_PK_RSA_ALT_SUPPORT
+ *
+ * Support external private RSA keys (eg from a HSM) in the PK layer.
+ *
+ * Comment this macro to disable support for external private RSA keys.
+ */
+#define MBEDTLS_PK_RSA_ALT_SUPPORT
+
+/**
+ * \def MBEDTLS_PKCS1_V15
+ *
+ * Enable support for PKCS#1 v1.5 encoding.
+ *
+ * Requires: MBEDTLS_RSA_C
+ *
+ * This enables support for PKCS#1 v1.5 operations.
+ */
+#define MBEDTLS_PKCS1_V15
+
+/**
+ * \def MBEDTLS_PKCS1_V21
+ *
+ * Enable support for PKCS#1 v2.1 encoding.
+ *
+ * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C
+ *
+ * This enables support for RSAES-OAEP and RSASSA-PSS operations.
+ */
+#define MBEDTLS_PKCS1_V21
+
+/** \def MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
+ *
+ * Enable support for platform built-in keys. If you enable this feature,
+ * you must implement the function mbedtls_psa_platform_get_builtin_key().
+ * See the documentation of that function for more information.
+ *
+ * Built-in keys are typically derived from a hardware unique key or
+ * stored in a secure element.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C.
+ *
+ * \warning This interface is experimental and may change or be removed
+ * without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
+
+/** \def MBEDTLS_PSA_CRYPTO_CLIENT
+ *
+ * Enable support for PSA crypto client.
+ *
+ * \note This option allows to include the code necessary for a PSA
+ *       crypto client when the PSA crypto implementation is not included in
+ *       the library (MBEDTLS_PSA_CRYPTO_C disabled). The code included is the
+ *       code to set and get PSA key attributes.
+ *       The development of PSA drivers partially relying on the library to
+ *       fulfill the hardware gaps is another possible usage of this option.
+ *
+ * \warning This interface is experimental and may change or be removed
+ * without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_CLIENT
+
+/** \def MBEDTLS_PSA_CRYPTO_DRIVERS
+ *
+ * Enable support for the experimental PSA crypto driver interface.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ * \warning This interface is experimental and may change or be removed
+ * without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_DRIVERS
+
+/** \def MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+ *
+ * Make the PSA Crypto module use an external random generator provided
+ * by a driver, instead of Mbed TLS's entropy and DRBG modules.
+ *
+ * \note This random generator must deliver random numbers with cryptographic
+ *       quality and high performance. It must supply unpredictable numbers
+ *       with a uniform distribution. The implementation of this function
+ *       is responsible for ensuring that the random generator is seeded
+ *       with sufficient entropy. If you have a hardware TRNG which is slow
+ *       or delivers non-uniform output, declare it as an entropy source
+ *       with mbedtls_entropy_add_source() instead of enabling this option.
+ *
+ * If you enable this option, you must configure the type
+ * ::mbedtls_psa_external_random_context_t in psa/crypto_platform.h
+ * and define a function called mbedtls_psa_external_get_random()
+ * with the following prototype:
+ * ```
+ * psa_status_t mbedtls_psa_external_get_random(
+ *     mbedtls_psa_external_random_context_t *context,
+ *     uint8_t *output, size_t output_size, size_t *output_length);
+ * );
+ * ```
+ * The \c context value is initialized to 0 before the first call.
+ * The function must fill the \c output buffer with \p output_size bytes
+ * of random data and set \c *output_length to \p output_size.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ * \warning If you enable this option, code that uses the PSA cryptography
+ *          interface will not use any of the entropy sources set up for
+ *          the entropy module, nor the NV seed that MBEDTLS_ENTROPY_NV_SEED
+ *          enables.
+ *
+ * \note This option is experimental and may be removed without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_SPM
+ *
+ * When MBEDTLS_PSA_CRYPTO_SPM is defined, the code is built for SPM (Secure
+ * Partition Manager) integration which separates the code into two parts: a
+ * NSPE (Non-Secure Process Environment) and an SPE (Secure Process
+ * Environment).
+ *
+ * Module:  library/psa_crypto.c
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ */
+//#define MBEDTLS_PSA_CRYPTO_SPM
+
+/**
+ * \def MBEDTLS_PSA_INJECT_ENTROPY
+ *
+ * Enable support for entropy injection at first boot. This feature is
+ * required on systems that do not have a built-in entropy source (TRNG).
+ * This feature is currently not supported on systems that have a built-in
+ * entropy source.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_STORAGE_C, MBEDTLS_ENTROPY_NV_SEED
+ *
+ */
+//#define MBEDTLS_PSA_INJECT_ENTROPY
+
+/**
+ * \def MBEDTLS_RSA_NO_CRT
+ *
+ * Do not use the Chinese Remainder Theorem
+ * for the RSA private operation.
+ *
+ * Uncomment this macro to disable the use of CRT in RSA.
+ *
+ */
+//#define MBEDTLS_RSA_NO_CRT
+
+/**
+ * \def MBEDTLS_SELF_TEST
+ *
+ * Enable the checkup functions (*_self_test).
+ */
+#define MBEDTLS_SELF_TEST
+
+/**
+ * \def MBEDTLS_SHA256_SMALLER
+ *
+ * Enable an implementation of SHA-256 that has lower ROM footprint but also
+ * lower performance.
+ *
+ * The default implementation is meant to be a reasonnable compromise between
+ * performance and size. This version optimizes more aggressively for size at
+ * the expense of performance. Eg on Cortex-M4 it reduces the size of
+ * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about
+ * 30%.
+ *
+ * Uncomment to enable the smaller implementation of SHA256.
+ */
+//#define MBEDTLS_SHA256_SMALLER
+
+/**
+ * \def MBEDTLS_SHA512_SMALLER
+ *
+ * Enable an implementation of SHA-512 that has lower ROM footprint but also
+ * lower performance.
+ *
+ * Uncomment to enable the smaller implementation of SHA512.
+ */
+//#define MBEDTLS_SHA512_SMALLER
+
+/**
+ * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES
+ *
+ * Enable sending of alert messages in case of encountered errors as per RFC.
+ * If you choose not to send the alert messages, mbed TLS can still communicate
+ * with other servers, only debugging of failures is harder.
+ *
+ * The advantage of not sending alert messages, is that no information is given
+ * about reasons for failures thus preventing adversaries of gaining intel.
+ *
+ * Enable sending of all alert messages
+ */
+#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
+
+/**
+ * \def MBEDTLS_SSL_DTLS_CONNECTION_ID
+ *
+ * Enable support for the DTLS Connection ID extension
+ * (version draft-ietf-tls-dtls-connection-id-05,
+ * https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05)
+ * which allows to identify DTLS connections across changes
+ * in the underlying transport.
+ *
+ * Setting this option enables the SSL APIs `mbedtls_ssl_set_cid()`,
+ * `mbedtls_ssl_get_peer_cid()` and `mbedtls_ssl_conf_cid()`.
+ * See the corresponding documentation for more information.
+ *
+ * \warning The Connection ID extension is still in draft state.
+ *          We make no stability promises for the availability
+ *          or the shape of the API controlled by this option.
+ *
+ * The maximum lengths of outgoing and incoming CIDs can be configured
+ * through the options
+ * - MBEDTLS_SSL_CID_OUT_LEN_MAX
+ * - MBEDTLS_SSL_CID_IN_LEN_MAX.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Uncomment to enable the Connection ID extension.
+ */
+//#define MBEDTLS_SSL_DTLS_CONNECTION_ID
+
+/**
+ * \def MBEDTLS_SSL_ASYNC_PRIVATE
+ *
+ * Enable asynchronous external private key operations in SSL. This allows
+ * you to configure an SSL connection to call an external cryptographic
+ * module to perform private key operations instead of performing the
+ * operation inside the library.
+ *
+ */
+//#define MBEDTLS_SSL_ASYNC_PRIVATE
+
+/**
+ * \def MBEDTLS_SSL_CONTEXT_SERIALIZATION
+ *
+ * Enable serialization of the TLS context structures, through use of the
+ * functions mbedtls_ssl_context_save() and mbedtls_ssl_context_load().
+ *
+ * This pair of functions allows one side of a connection to serialize the
+ * context associated with the connection, then free or re-use that context
+ * while the serialized state is persisted elsewhere, and finally deserialize
+ * that state to a live context for resuming read/write operations on the
+ * connection. From a protocol perspective, the state of the connection is
+ * unaffected, in particular this is entirely transparent to the peer.
+ *
+ * Note: this is distinct from TLS session resumption, which is part of the
+ * protocol and fully visible by the peer. TLS session resumption enables
+ * establishing new connections associated to a saved session with shorter,
+ * lighter handshakes, while context serialization is a local optimization in
+ * handling a single, potentially long-lived connection.
+ *
+ * Enabling these APIs makes some SSL structures larger, as 64 extra bytes are
+ * saved after the handshake to allow for more efficient serialization, so if
+ * you don't need this feature you'll save RAM by disabling it.
+ *
+ * Comment to disable the context serialization APIs.
+ */
+#define MBEDTLS_SSL_CONTEXT_SERIALIZATION
+
+/**
+ * \def MBEDTLS_SSL_DEBUG_ALL
+ *
+ * Enable the debug messages in SSL module for all issues.
+ * Debug messages have been disabled in some places to prevent timing
+ * attacks due to (unbalanced) debugging function calls.
+ *
+ * If you need all error reporting you should enable this during debugging,
+ * but remove this for production servers that should log as well.
+ *
+ * Uncomment this macro to report all debug messages on errors introducing
+ * a timing side-channel.
+ *
+ */
+//#define MBEDTLS_SSL_DEBUG_ALL
+
+/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC
+ *
+ * Enable support for Encrypt-then-MAC, RFC 7366.
+ *
+ * This allows peers that both support it to use a more robust protection for
+ * ciphersuites using CBC, providing deep resistance against timing attacks
+ * on the padding or underlying cipher.
+ *
+ * This only affects CBC ciphersuites, and is useless if none is defined.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for Encrypt-then-MAC
+ */
+#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
+
+/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET
+ *
+ * Enable support for RFC 7627: Session Hash and Extended Master Secret
+ * Extension.
+ *
+ * This was introduced as "the proper fix" to the Triple Handshake familiy of
+ * attacks, but it is recommended to always use it (even if you disable
+ * renegotiation), since it actually fixes a more fundamental issue in the
+ * original SSL/TLS design, and has implications beyond Triple Handshake.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for Extended Master Secret.
+ */
+#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
+
+/**
+ * \def MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+ *
+ * This option controls the availability of the API mbedtls_ssl_get_peer_cert()
+ * giving access to the peer's certificate after completion of the handshake.
+ *
+ * Unless you need mbedtls_ssl_peer_cert() in your application, it is
+ * recommended to disable this option for reduced RAM usage.
+ *
+ * \note If this option is disabled, mbedtls_ssl_get_peer_cert() is still
+ *       defined, but always returns \c NULL.
+ *
+ * \note This option has no influence on the protection against the
+ *       triple handshake attack. Even if it is disabled, Mbed TLS will
+ *       still ensure that certificates do not change during renegotiation,
+ *       for exaple by keeping a hash of the peer's certificate.
+ *
+ * Comment this macro to disable storing the peer's certificate
+ * after the handshake.
+ */
+#define MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+
+/**
+ * \def MBEDTLS_SSL_RENEGOTIATION
+ *
+ * Enable support for TLS renegotiation.
+ *
+ * The two main uses of renegotiation are (1) refresh keys on long-lived
+ * connections and (2) client authentication after the initial handshake.
+ * If you don't need renegotiation, it's probably better to disable it, since
+ * it has been associated with security issues in the past and is easy to
+ * misuse/misunderstand.
+ *
+ * Comment this to disable support for renegotiation.
+ *
+ * \note   Even if this option is disabled, both client and server are aware
+ *         of the Renegotiation Indication Extension (RFC 5746) used to
+ *         prevent the SSL renegotiation attack (see RFC 5746 Sect. 1).
+ *         (See \c mbedtls_ssl_conf_legacy_renegotiation for the
+ *          configuration of this extension).
+ *
+ */
+#define MBEDTLS_SSL_RENEGOTIATION
+
+/**
+ * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ *
+ * Enable support for RFC 6066 max_fragment_length extension in SSL.
+ *
+ * Comment this macro to disable support for the max_fragment_length extension
+ */
+#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+
+/**
+ * \def MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled).
+ *
+ * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C
+ *           (Depends on ciphersuites)
+ *
+ * Comment this macro to disable support for TLS 1.2 / DTLS 1.2
+ */
+#define MBEDTLS_SSL_PROTO_TLS1_2
+
+/**
+ * \def MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL
+ *
+ * This macro is used to selectively enable experimental parts
+ * of the code that contribute to the ongoing development of
+ * the prototype TLS 1.3 and DTLS 1.3 implementation, and provide
+ * no other purpose.
+ *
+ * \warning TLS 1.3 and DTLS 1.3 aren't yet supported in Mbed TLS,
+ *          and no feature exposed through this macro is part of the
+ *          public API. In particular, features under the control
+ *          of this macro are experimental and don't come with any
+ *          stability guarantees.
+ *
+ * Uncomment this macro to enable experimental and partial
+ * functionality specific to TLS 1.3.
+ */
+//#define MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL
+
+/**
+ * \def MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Enable support for DTLS (all available versions).
+ *
+ * Enable this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for DTLS
+ */
+#define MBEDTLS_SSL_PROTO_DTLS
+
+/**
+ * \def MBEDTLS_SSL_ALPN
+ *
+ * Enable support for RFC 7301 Application Layer Protocol Negotiation.
+ *
+ * Comment this macro to disable support for ALPN.
+ */
+#define MBEDTLS_SSL_ALPN
+
+/**
+ * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY
+ *
+ * Enable support for the anti-replay mechanism in DTLS.
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *           MBEDTLS_SSL_PROTO_DTLS
+ *
+ * \warning Disabling this is often a security risk!
+ * See mbedtls_ssl_conf_dtls_anti_replay() for details.
+ *
+ * Comment this to disable anti-replay in DTLS.
+ */
+#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
+
+/**
+ * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY
+ *
+ * Enable support for HelloVerifyRequest on DTLS servers.
+ *
+ * This feature is highly recommended to prevent DTLS servers being used as
+ * amplifiers in DoS attacks against other hosts. It should always be enabled
+ * unless you know for sure amplification cannot be a problem in the
+ * environment in which your server operates.
+ *
+ * \warning Disabling this can ba a security risk! (see above)
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Comment this to disable support for HelloVerifyRequest.
+ */
+#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
+
+/**
+ * \def MBEDTLS_SSL_DTLS_SRTP
+ *
+ * Enable support for negotiation of DTLS-SRTP (RFC 5764)
+ * through the use_srtp extension.
+ *
+ * \note This feature provides the minimum functionality required
+ * to negotiate the use of DTLS-SRTP and to allow the derivation of
+ * the associated SRTP packet protection key material.
+ * In particular, the SRTP packet protection itself, as well as the
+ * demultiplexing of RTP and DTLS packets at the datagram layer
+ * (see Section 5 of RFC 5764), are not handled by this feature.
+ * Instead, after successful completion of a handshake negotiating
+ * the use of DTLS-SRTP, the extended key exporter API
+ * mbedtls_ssl_conf_export_keys_cb() should be used to implement
+ * the key exporter described in Section 4.2 of RFC 5764 and RFC 5705
+ * (this is implemented in the SSL example programs).
+ * The resulting key should then be passed to an SRTP stack.
+ *
+ * Setting this option enables the runtime API
+ * mbedtls_ssl_conf_dtls_srtp_protection_profiles()
+ * through which the supported DTLS-SRTP protection
+ * profiles can be configured. You must call this API at
+ * runtime if you wish to negotiate the use of DTLS-SRTP.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Uncomment this to enable support for use_srtp extension.
+ */
+//#define MBEDTLS_SSL_DTLS_SRTP
+
+/**
+ * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
+ *
+ * Enable server-side support for clients that reconnect from the same port.
+ *
+ * Some clients unexpectedly close the connection and try to reconnect using the
+ * same source port. This needs special support from the server to handle the
+ * new connection securely, as described in section 4.2.8 of RFC 6347. This
+ * flag enables that support.
+ *
+ * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY
+ *
+ * Comment this to disable support for clients reusing the source port.
+ */
+#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
+
+/**
+ * \def MBEDTLS_SSL_SESSION_TICKETS
+ *
+ * Enable support for RFC 5077 session tickets in SSL.
+ * Client-side, provides full support for session tickets (maintenance of a
+ * session store remains the responsibility of the application, though).
+ * Server-side, you also need to provide callbacks for writing and parsing
+ * tickets, including authenticated encryption and key management. Example
+ * callbacks are provided by MBEDTLS_SSL_TICKET_C.
+ *
+ * Comment this macro to disable support for SSL session tickets
+ */
+#define MBEDTLS_SSL_SESSION_TICKETS
+
+/**
+ * \def MBEDTLS_SSL_EXPORT_KEYS
+ *
+ * Enable support for exporting key block and master secret.
+ * This is required for certain users of TLS, e.g. EAP-TLS.
+ *
+ * Comment this macro to disable support for key export
+ */
+#define MBEDTLS_SSL_EXPORT_KEYS
+
+/**
+ * \def MBEDTLS_SSL_SERVER_NAME_INDICATION
+ *
+ * Enable support for RFC 6066 server name indication (SNI) in SSL.
+ *
+ * Requires: MBEDTLS_X509_CRT_PARSE_C
+ *
+ * Comment this macro to disable support for server name indication in SSL
+ */
+#define MBEDTLS_SSL_SERVER_NAME_INDICATION
+
+/**
+ * \def MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+ *
+ * When this option is enabled, the SSL buffer will be resized automatically
+ * based on the negotiated maximum fragment length in each direction.
+ *
+ * Requires: MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ */
+//#define MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+
+/**
+ * \def MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+ *
+ * Enable testing of the constant-flow nature of some sensitive functions with
+ * clang's MemorySanitizer. This causes some existing tests to also test
+ * this non-functional property of the code under test.
+ *
+ * This setting requires compiling with clang -fsanitize=memory. The test
+ * suites can then be run normally.
+ *
+ * \warning This macro is only used for extended testing; it is not considered
+ * part of the library's API, so it may change or disappear at any time.
+ *
+ * Uncomment to enable testing of the constant-flow nature of selected code.
+ */
+//#define MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+
+/**
+ * \def MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+ *
+ * Enable testing of the constant-flow nature of some sensitive functions with
+ * valgrind's memcheck tool. This causes some existing tests to also test
+ * this non-functional property of the code under test.
+ *
+ * This setting requires valgrind headers for building, and is only useful for
+ * testing if the tests suites are run with valgrind's memcheck. This can be
+ * done for an individual test suite with 'valgrind ./test_suite_xxx', or when
+ * using CMake, this can be done for all test suites with 'make memcheck'.
+ *
+ * \warning This macro is only used for extended testing; it is not considered
+ * part of the library's API, so it may change or disappear at any time.
+ *
+ * Uncomment to enable testing of the constant-flow nature of selected code.
+ */
+//#define MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+
+/**
+ * \def MBEDTLS_TEST_HOOKS
+ *
+ * Enable features for invasive testing such as introspection functions and
+ * hooks for fault injection. This enables additional unit tests.
+ *
+ * Merely enabling this feature should not change the behavior of the product.
+ * It only adds new code, and new branching points where the default behavior
+ * is the same as when this feature is disabled.
+ * However, this feature increases the attack surface: there is an added
+ * risk of vulnerabilities, and more gadgets that can make exploits easier.
+ * Therefore this feature must never be enabled in production.
+ *
+ * See `docs/architecture/testing/mbed-crypto-invasive-testing.md` for more
+ * information.
+ *
+ * Uncomment to enable invasive tests.
+ */
+//#define MBEDTLS_TEST_HOOKS
+
+/**
+ * \def MBEDTLS_THREADING_ALT
+ *
+ * Provide your own alternate threading implementation.
+ *
+ * Requires: MBEDTLS_THREADING_C
+ *
+ * Uncomment this to allow your own alternate threading implementation.
+ */
+//#define MBEDTLS_THREADING_ALT
+
+/**
+ * \def MBEDTLS_THREADING_PTHREAD
+ *
+ * Enable the pthread wrapper layer for the threading layer.
+ *
+ * Requires: MBEDTLS_THREADING_C
+ *
+ * Uncomment this to enable pthread mutexes.
+ */
+//#define MBEDTLS_THREADING_PTHREAD
+
+/**
+ * \def MBEDTLS_USE_PSA_CRYPTO
+ *
+ * Make the X.509 and TLS library use PSA for cryptographic operations, and
+ * enable new APIs for using keys handled by PSA Crypto.
+ *
+ * \note Development of this option is currently in progress, and parts of Mbed
+ * TLS's X.509 and TLS modules are not ported to PSA yet. However, these parts
+ * will still continue to work as usual, so enabling this option should not
+ * break backwards compatibility.
+ *
+ * \warning The PSA Crypto API is in beta stage. While you're welcome to
+ * experiment using it, incompatible API changes are still possible, and some
+ * parts may not have reached the same quality as the rest of Mbed TLS yet.
+ *
+ * \warning This option enables new Mbed TLS APIs that are dependent on the
+ * PSA Crypto API, so can't come with the same stability guarantees as the
+ * rest of the Mbed TLS APIs. You're welcome to experiment with them, but for
+ * now, access to these APIs is opt-in (via enabling the present option), in
+ * order to clearly differentiate them from the stable Mbed TLS APIs.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C.
+ *
+ * Uncomment this to enable internal use of PSA Crypto and new associated APIs.
+ */
+//#define MBEDTLS_USE_PSA_CRYPTO
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_CONFIG
+ *
+ * This setting allows support for cryptographic mechanisms through the PSA
+ * API to be configured separately from support through the mbedtls API.
+ *
+ * Uncomment this to enable use of PSA Crypto configuration settings which
+ * can be found in include/psa/crypto_config.h.
+ *
+ * If you enable this option and write your own configuration file, you must
+ * include mbedtls/config_psa.h in your configuration file. The default
+ * provided mbedtls/mbedtls_config.h contains the necessary inclusion.
+ *
+ * This feature is still experimental and is not ready for production since
+ * it is not completed.
+ */
+//#define MBEDTLS_PSA_CRYPTO_CONFIG
+
+/**
+ * \def MBEDTLS_VERSION_FEATURES
+ *
+ * Allow run-time checking of compile-time enabled features. Thus allowing users
+ * to check at run-time if the library is for instance compiled with threading
+ * support via mbedtls_version_check_feature().
+ *
+ * Requires: MBEDTLS_VERSION_C
+ *
+ * Comment this to disable run-time checking and save ROM space
+ */
+#define MBEDTLS_VERSION_FEATURES
+
+/**
+ * \def MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+ *
+ * If set, this enables the X.509 API `mbedtls_x509_crt_verify_with_ca_cb()`
+ * and the SSL API `mbedtls_ssl_conf_ca_cb()` which allow users to configure
+ * the set of trusted certificates through a callback instead of a linked
+ * list.
+ *
+ * This is useful for example in environments where a large number of trusted
+ * certificates is present and storing them in a linked list isn't efficient
+ * enough, or when the set of trusted certificates changes frequently.
+ *
+ * See the documentation of `mbedtls_x509_crt_verify_with_ca_cb()` and
+ * `mbedtls_ssl_conf_ca_cb()` for more information.
+ *
+ * Uncomment to enable trusted certificate callbacks.
+ */
+//#define MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+
+/**
+ * \def MBEDTLS_X509_REMOVE_INFO
+ *
+ * Disable mbedtls_x509_*_info() and related APIs.
+ *
+ * Uncomment to omit mbedtls_x509_*_info(), as well as mbedtls_debug_print_crt()
+ * and other functions/constants only used by these functions, thus reducing
+ * the code footprint by several KB.
+ */
+//#define MBEDTLS_X509_REMOVE_INFO
+
+/**
+ * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT
+ *
+ * Enable parsing and verification of X.509 certificates, CRLs and CSRS
+ * signed with RSASSA-PSS (aka PKCS#1 v2.1).
+ *
+ * Comment this macro to disallow using RSASSA-PSS in certificates.
+ */
+#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
+/* \} name SECTION: mbed TLS feature support */
+
+/**
+ * \name SECTION: mbed TLS modules
+ *
+ * This section enables or disables entire modules in mbed TLS
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_AESNI_C
+ *
+ * Enable AES-NI support on x86-64.
+ *
+ * Module:  library/aesni.c
+ * Caller:  library/aes.c
+ *
+ * Requires: MBEDTLS_HAVE_ASM
+ *
+ * This modules adds support for the AES-NI instructions on x86-64
+ */
+#define MBEDTLS_AESNI_C
+
+/**
+ * \def MBEDTLS_AES_C
+ *
+ * Enable the AES block cipher.
+ *
+ * Module:  library/aes.c
+ * Caller:  library/cipher.c
+ *          library/pem.c
+ *          library/ctr_drbg.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
+ *
+ * PEM_PARSE uses AES for decrypting encrypted keys.
+ */
+#define MBEDTLS_AES_C
+
+/**
+ * \def MBEDTLS_ASN1_PARSE_C
+ *
+ * Enable the generic ASN1 parser.
+ *
+ * Module:  library/asn1.c
+ * Caller:  library/x509.c
+ *          library/dhm.c
+ *          library/pkcs12.c
+ *          library/pkcs5.c
+ *          library/pkparse.c
+ */
+#define MBEDTLS_ASN1_PARSE_C
+
+/**
+ * \def MBEDTLS_ASN1_WRITE_C
+ *
+ * Enable the generic ASN1 writer.
+ *
+ * Module:  library/asn1write.c
+ * Caller:  library/ecdsa.c
+ *          library/pkwrite.c
+ *          library/x509_create.c
+ *          library/x509write_crt.c
+ *          library/x509write_csr.c
+ */
+#define MBEDTLS_ASN1_WRITE_C
+
+/**
+ * \def MBEDTLS_BASE64_C
+ *
+ * Enable the Base64 module.
+ *
+ * Module:  library/base64.c
+ * Caller:  library/pem.c
+ *
+ * This module is required for PEM support (required by X.509).
+ */
+#define MBEDTLS_BASE64_C
+
+/**
+ * \def MBEDTLS_BIGNUM_C
+ *
+ * Enable the multi-precision integer library.
+ *
+ * Module:  library/bignum.c
+ * Caller:  library/dhm.c
+ *          library/ecp.c
+ *          library/ecdsa.c
+ *          library/rsa.c
+ *          library/rsa_alt_helpers.c
+ *          library/ssl_tls.c
+ *
+ * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
+ */
+#define MBEDTLS_BIGNUM_C
+
+/**
+ * \def MBEDTLS_CAMELLIA_C
+ *
+ * Enable the Camellia block cipher.
+ *
+ * Module:  library/camellia.c
+ * Caller:  library/cipher.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_CAMELLIA_C
+
+/**
+ * \def MBEDTLS_ARIA_C
+ *
+ * Enable the ARIA block cipher.
+ *
+ * Module:  library/aria.c
+ * Caller:  library/cipher.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *
+ *      MBEDTLS_TLS_RSA_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384
+ *      MBEDTLS_TLS_PSK_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_PSK_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256
+ *      MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256
+ *      MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384
+ */
+#define MBEDTLS_ARIA_C
+
+/**
+ * \def MBEDTLS_CCM_C
+ *
+ * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
+ *
+ * Module:  library/ccm.c
+ *
+ * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C
+ *
+ * This module enables the AES-CCM ciphersuites, if other requisites are
+ * enabled as well.
+ */
+#define MBEDTLS_CCM_C
+
+/**
+ * \def MBEDTLS_CHACHA20_C
+ *
+ * Enable the ChaCha20 stream cipher.
+ *
+ * Module:  library/chacha20.c
+ */
+#define MBEDTLS_CHACHA20_C
+
+/**
+ * \def MBEDTLS_CHACHAPOLY_C
+ *
+ * Enable the ChaCha20-Poly1305 AEAD algorithm.
+ *
+ * Module:  library/chachapoly.c
+ *
+ * This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C
+ */
+#define MBEDTLS_CHACHAPOLY_C
+
+/**
+ * \def MBEDTLS_CIPHER_C
+ *
+ * Enable the generic cipher layer.
+ *
+ * Module:  library/cipher.c
+ * Caller:  library/ssl_tls.c
+ *
+ * Uncomment to enable generic cipher wrappers.
+ */
+#define MBEDTLS_CIPHER_C
+
+/**
+ * \def MBEDTLS_CMAC_C
+ *
+ * Enable the CMAC (Cipher-based Message Authentication Code) mode for block
+ * ciphers.
+ *
+ * \note When #MBEDTLS_CMAC_ALT is active, meaning that the underlying
+ *       implementation of the CMAC algorithm is provided by an alternate
+ *       implementation, that alternate implementation may opt to not support
+ *       AES-192 or 3DES as underlying block ciphers for the CMAC operation.
+ *
+ * Module:  library/cmac.c
+ *
+ * Requires: MBEDTLS_AES_C or MBEDTLS_DES_C
+ *
+ */
+#define MBEDTLS_CMAC_C
+
+/**
+ * \def MBEDTLS_CTR_DRBG_C
+ *
+ * Enable the CTR_DRBG AES-based random generator.
+ * The CTR_DRBG generator uses AES-256 by default.
+ * To use AES-128 instead, enable \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY above.
+ *
+ * \note To achieve a 256-bit security strength with CTR_DRBG,
+ *       you must use AES-256 *and* use sufficient entropy.
+ *       See ctr_drbg.h for more details.
+ *
+ * Module:  library/ctr_drbg.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_AES_C
+ *
+ * This module provides the CTR_DRBG AES random number generator.
+ */
+#define MBEDTLS_CTR_DRBG_C
+
+/**
+ * \def MBEDTLS_DEBUG_C
+ *
+ * Enable the debug functions.
+ *
+ * Module:  library/debug.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *
+ * This module provides debugging functions.
+ */
+#define MBEDTLS_DEBUG_C
+
+/**
+ * \def MBEDTLS_DES_C
+ *
+ * Enable the DES block cipher.
+ *
+ * Module:  library/des.c
+ * Caller:  library/pem.c
+ *          library/cipher.c
+ *
+ * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
+ *
+ * \warning   DES is considered a weak cipher and its use constitutes a
+ *            security risk. We recommend considering stronger ciphers instead.
+ */
+#define MBEDTLS_DES_C
+
+/**
+ * \def MBEDTLS_DHM_C
+ *
+ * Enable the Diffie-Hellman-Merkle module.
+ *
+ * Module:  library/dhm.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * This module is used by the following key exchanges:
+ *      DHE-RSA, DHE-PSK
+ *
+ * \warning    Using DHE constitutes a security risk as it
+ *             is not possible to validate custom DH parameters.
+ *             If possible, it is recommended users should consider
+ *             preferring other methods of key exchange.
+ *             See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_DHM_C
+
+/**
+ * \def MBEDTLS_ECDH_C
+ *
+ * Enable the elliptic curve Diffie-Hellman library.
+ *
+ * Module:  library/ecdh.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * This module is used by the following key exchanges:
+ *      ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
+ *
+ * Requires: MBEDTLS_ECP_C
+ */
+#define MBEDTLS_ECDH_C
+
+/**
+ * \def MBEDTLS_ECDSA_C
+ *
+ * Enable the elliptic curve DSA library.
+ *
+ * Module:  library/ecdsa.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ *      ECDHE-ECDSA
+ *
+ * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C,
+ *           and at least one MBEDTLS_ECP_DP_XXX_ENABLED for a
+ *           short Weierstrass curve.
+ */
+#define MBEDTLS_ECDSA_C
+
+/**
+ * \def MBEDTLS_ECJPAKE_C
+ *
+ * Enable the elliptic curve J-PAKE library.
+ *
+ * \note EC J-PAKE support is based on the Thread v1.0.0 specification.
+ *       It has not been reviewed for compliance with newer standards such as
+ *       Thread v1.1 or RFC 8236.
+ *
+ * Module:  library/ecjpake.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ *      ECJPAKE
+ *
+ * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C
+ */
+#define MBEDTLS_ECJPAKE_C
+
+/**
+ * \def MBEDTLS_ECP_C
+ *
+ * Enable the elliptic curve over GF(p) library.
+ *
+ * Module:  library/ecp.c
+ * Caller:  library/ecdh.c
+ *          library/ecdsa.c
+ *          library/ecjpake.c
+ *
+ * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
+ */
+#define MBEDTLS_ECP_C
+
+/**
+ * \def MBEDTLS_ENTROPY_C
+ *
+ * Enable the platform-specific entropy code.
+ *
+ * Module:  library/entropy.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C
+ *
+ * This module provides a generic entropy pool
+ */
+#define MBEDTLS_ENTROPY_C
+
+/**
+ * \def MBEDTLS_ERROR_C
+ *
+ * Enable error code to error string conversion.
+ *
+ * Module:  library/error.c
+ * Caller:
+ *
+ * This module enables mbedtls_strerror().
+ */
+#define MBEDTLS_ERROR_C
+
+/**
+ * \def MBEDTLS_GCM_C
+ *
+ * Enable the Galois/Counter Mode (GCM).
+ *
+ * Module:  library/gcm.c
+ *
+ * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C or MBEDTLS_ARIA_C
+ *
+ * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
+ * requisites are enabled as well.
+ */
+#define MBEDTLS_GCM_C
+
+/**
+ * \def MBEDTLS_HKDF_C
+ *
+ * Enable the HKDF algorithm (RFC 5869).
+ *
+ * Module:  library/hkdf.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * This module adds support for the Hashed Message Authentication Code
+ * (HMAC)-based key derivation function (HKDF).
+ */
+#define MBEDTLS_HKDF_C
+
+/**
+ * \def MBEDTLS_HMAC_DRBG_C
+ *
+ * Enable the HMAC_DRBG random generator.
+ *
+ * Module:  library/hmac_drbg.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * Uncomment to enable the HMAC_DRBG random number geerator.
+ */
+#define MBEDTLS_HMAC_DRBG_C
+
+/**
+ * \def MBEDTLS_NIST_KW_C
+ *
+ * Enable the Key Wrapping mode for 128-bit block ciphers,
+ * as defined in NIST SP 800-38F. Only KW and KWP modes
+ * are supported. At the moment, only AES is approved by NIST.
+ *
+ * Module:  library/nist_kw.c
+ *
+ * Requires: MBEDTLS_AES_C and MBEDTLS_CIPHER_C
+ */
+#define MBEDTLS_NIST_KW_C
+
+/**
+ * \def MBEDTLS_MD_C
+ *
+ * Enable the generic message digest layer.
+ *
+ * Module:  library/md.c
+ * Caller:
+ *
+ * Uncomment to enable generic message digest wrappers.
+ */
+#define MBEDTLS_MD_C
+
+/**
+ * \def MBEDTLS_MD5_C
+ *
+ * Enable the MD5 hash algorithm.
+ *
+ * Module:  library/md5.c
+ * Caller:  library/md.c
+ *          library/pem.c
+ *          library/ssl_tls.c
+ *
+ * This module is required for TLS 1.2 depending on the handshake parameters.
+ * Further, it is used for checking MD5-signed certificates, and for PBKDF1
+ * when decrypting PEM-encoded encrypted keys.
+ *
+ * \warning   MD5 is considered a weak message digest and its use constitutes a
+ *            security risk. If possible, we recommend avoiding dependencies on
+ *            it, and considering stronger message digests instead.
+ *
+ */
+#define MBEDTLS_MD5_C
+
+/**
+ * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *
+ * Enable the buffer allocator implementation that makes use of a (stack)
+ * based buffer to 'allocate' dynamic memory. (replaces calloc() and free()
+ * calls)
+ *
+ * Module:  library/memory_buffer_alloc.c
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *           MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS)
+ *
+ * Enable this module to enable the buffer memory allocator.
+ */
+//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C
+
+/**
+ * \def MBEDTLS_NET_C
+ *
+ * Enable the TCP and UDP over IPv6/IPv4 networking routines.
+ *
+ * \note This module only works on POSIX/Unix (including Linux, BSD and OS X)
+ * and Windows. For other platforms, you'll want to disable it, and write your
+ * own networking callbacks to be passed to \c mbedtls_ssl_set_bio().
+ *
+ * \note See also our Knowledge Base article about porting to a new
+ * environment:
+ * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
+ *
+ * Module:  library/net_sockets.c
+ *
+ * This module provides networking routines.
+ */
+#define MBEDTLS_NET_C
+
+/**
+ * \def MBEDTLS_OID_C
+ *
+ * Enable the OID database.
+ *
+ * Module:  library/oid.c
+ * Caller:  library/asn1write.c
+ *          library/pkcs5.c
+ *          library/pkparse.c
+ *          library/pkwrite.c
+ *          library/rsa.c
+ *          library/x509.c
+ *          library/x509_create.c
+ *          library/x509_crl.c
+ *          library/x509_crt.c
+ *          library/x509_csr.c
+ *          library/x509write_crt.c
+ *          library/x509write_csr.c
+ *
+ * This modules translates between OIDs and internal values.
+ */
+#define MBEDTLS_OID_C
+
+/**
+ * \def MBEDTLS_PADLOCK_C
+ *
+ * Enable VIA Padlock support on x86.
+ *
+ * Module:  library/padlock.c
+ * Caller:  library/aes.c
+ *
+ * Requires: MBEDTLS_HAVE_ASM
+ *
+ * This modules adds support for the VIA PadLock on x86.
+ */
+#define MBEDTLS_PADLOCK_C
+
+/**
+ * \def MBEDTLS_PEM_PARSE_C
+ *
+ * Enable PEM decoding / parsing.
+ *
+ * Module:  library/pem.c
+ * Caller:  library/dhm.c
+ *          library/pkparse.c
+ *          library/x509_crl.c
+ *          library/x509_crt.c
+ *          library/x509_csr.c
+ *
+ * Requires: MBEDTLS_BASE64_C
+ *
+ * This modules adds support for decoding / parsing PEM files.
+ */
+#define MBEDTLS_PEM_PARSE_C
+
+/**
+ * \def MBEDTLS_PEM_WRITE_C
+ *
+ * Enable PEM encoding / writing.
+ *
+ * Module:  library/pem.c
+ * Caller:  library/pkwrite.c
+ *          library/x509write_crt.c
+ *          library/x509write_csr.c
+ *
+ * Requires: MBEDTLS_BASE64_C
+ *
+ * This modules adds support for encoding / writing PEM files.
+ */
+#define MBEDTLS_PEM_WRITE_C
+
+/**
+ * \def MBEDTLS_PK_C
+ *
+ * Enable the generic public (asymetric) key layer.
+ *
+ * Module:  library/pk.c
+ * Caller:  library/ssl_tls.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C
+ *
+ * Uncomment to enable generic public key wrappers.
+ */
+#define MBEDTLS_PK_C
+
+/**
+ * \def MBEDTLS_PK_PARSE_C
+ *
+ * Enable the generic public (asymetric) key parser.
+ *
+ * Module:  library/pkparse.c
+ * Caller:  library/x509_crt.c
+ *          library/x509_csr.c
+ *
+ * Requires: MBEDTLS_PK_C
+ *
+ * Uncomment to enable generic public key parse functions.
+ */
+#define MBEDTLS_PK_PARSE_C
+
+/**
+ * \def MBEDTLS_PK_WRITE_C
+ *
+ * Enable the generic public (asymetric) key writer.
+ *
+ * Module:  library/pkwrite.c
+ * Caller:  library/x509write.c
+ *
+ * Requires: MBEDTLS_PK_C
+ *
+ * Uncomment to enable generic public key write functions.
+ */
+#define MBEDTLS_PK_WRITE_C
+
+/**
+ * \def MBEDTLS_PKCS5_C
+ *
+ * Enable PKCS#5 functions.
+ *
+ * Module:  library/pkcs5.c
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * This module adds support for the PKCS#5 functions.
+ */
+#define MBEDTLS_PKCS5_C
+
+/**
+ * \def MBEDTLS_PKCS12_C
+ *
+ * Enable PKCS#12 PBE functions.
+ * Adds algorithms for parsing PKCS#8 encrypted private keys
+ *
+ * Module:  library/pkcs12.c
+ * Caller:  library/pkparse.c
+ *
+ * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C
+ *
+ * This module enables PKCS#12 functions.
+ */
+#define MBEDTLS_PKCS12_C
+
+/**
+ * \def MBEDTLS_PLATFORM_C
+ *
+ * Enable the platform abstraction layer that allows you to re-assign
+ * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit().
+ *
+ * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT
+ * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned
+ * above to be specified at runtime or compile time respectively.
+ *
+ * \note This abstraction layer must be enabled on Windows (including MSYS2)
+ * as other module rely on it for a fixed snprintf implementation.
+ *
+ * Module:  library/platform.c
+ * Caller:  Most other .c files
+ *
+ * This module enables abstraction of common (libc) functions.
+ */
+#define MBEDTLS_PLATFORM_C
+
+/**
+ * \def MBEDTLS_POLY1305_C
+ *
+ * Enable the Poly1305 MAC algorithm.
+ *
+ * Module:  library/poly1305.c
+ * Caller:  library/chachapoly.c
+ */
+#define MBEDTLS_POLY1305_C
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_C
+ *
+ * Enable the Platform Security Architecture cryptography API.
+ *
+ * \warning The PSA Crypto API is still beta status. While you're welcome to
+ * experiment using it, incompatible API changes are still possible, and some
+ * parts may not have reached the same quality as the rest of Mbed TLS yet.
+ *
+ * Module:  library/psa_crypto.c
+ *
+ * Requires: either MBEDTLS_CTR_DRBG_C and MBEDTLS_ENTROPY_C,
+ *           or MBEDTLS_HMAC_DRBG_C and MBEDTLS_ENTROPY_C,
+ *           or MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG.
+ *
+ */
+#define MBEDTLS_PSA_CRYPTO_C
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_SE_C
+ *
+ * Enable secure element support in the Platform Security Architecture
+ * cryptography API.
+ *
+ * \warning This feature is not yet suitable for production. It is provided
+ *          for API evaluation and testing purposes only.
+ *
+ * Module:  library/psa_crypto_se.c
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C, MBEDTLS_PSA_CRYPTO_STORAGE_C
+ *
+ */
+//#define MBEDTLS_PSA_CRYPTO_SE_C
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_STORAGE_C
+ *
+ * Enable the Platform Security Architecture persistent key storage.
+ *
+ * Module:  library/psa_crypto_storage.c
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C,
+ *           either MBEDTLS_PSA_ITS_FILE_C or a native implementation of
+ *           the PSA ITS interface
+ */
+#define MBEDTLS_PSA_CRYPTO_STORAGE_C
+
+/**
+ * \def MBEDTLS_PSA_ITS_FILE_C
+ *
+ * Enable the emulation of the Platform Security Architecture
+ * Internal Trusted Storage (PSA ITS) over files.
+ *
+ * Module:  library/psa_its_file.c
+ *
+ * Requires: MBEDTLS_FS_IO
+ */
+#define MBEDTLS_PSA_ITS_FILE_C
+
+/**
+ * \def MBEDTLS_RIPEMD160_C
+ *
+ * Enable the RIPEMD-160 hash algorithm.
+ *
+ * Module:  library/ripemd160.c
+ * Caller:  library/md.c
+ *
+ */
+#define MBEDTLS_RIPEMD160_C
+
+/**
+ * \def MBEDTLS_RSA_C
+ *
+ * Enable the RSA public-key cryptosystem.
+ *
+ * Module:  library/rsa.c
+ *          library/rsa_alt_helpers.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *          library/x509.c
+ *
+ * This module is used by the following key exchanges:
+ *      RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
+ *
+ * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C
+ */
+#define MBEDTLS_RSA_C
+
+/**
+ * \def MBEDTLS_SHA1_C
+ *
+ * Enable the SHA1 cryptographic hash algorithm.
+ *
+ * Module:  library/sha1.c
+ * Caller:  library/md.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *          library/x509write_crt.c
+ *
+ * This module is required for TLS 1.2 depending on the handshake parameters,
+ * and for SHA1-signed certificates.
+ *
+ * \warning   SHA-1 is considered a weak message digest and its use constitutes
+ *            a security risk. If possible, we recommend avoiding dependencies
+ *            on it, and considering stronger message digests instead.
+ *
+ */
+#define MBEDTLS_SHA1_C
+
+/**
+ * \def MBEDTLS_SHA224_C
+ *
+ * Enable the SHA-224 cryptographic hash algorithm.
+ *
+ * Requires: MBEDTLS_SHA256_C. The library does not currently support enabling
+ *           SHA-224 without SHA-256.
+ *
+ * Module:  library/sha256.c
+ * Caller:  library/md.c
+ *          library/ssl_cookie.c
+ *
+ * This module adds support for SHA-224.
+ */
+#define MBEDTLS_SHA224_C
+
+/**
+ * \def MBEDTLS_SHA256_C
+ *
+ * Enable the SHA-256 cryptographic hash algorithm.
+ *
+ * Requires: MBEDTLS_SHA224_C. The library does not currently support enabling
+ *           SHA-256 without SHA-224.
+ *
+ * Module:  library/sha256.c
+ * Caller:  library/entropy.c
+ *          library/md.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *
+ * This module adds support for SHA-256.
+ * This module is required for the SSL/TLS 1.2 PRF function.
+ */
+#define MBEDTLS_SHA256_C
+
+/**
+ * \def MBEDTLS_SHA384_C
+ *
+ * Enable the SHA-384 cryptographic hash algorithm.
+ *
+ * Requires: MBEDTLS_SHA512_C
+ *
+ * Module:  library/sha512.c
+ * Caller:  library/md.c
+ *          library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * Comment to disable SHA-384
+ */
+#define MBEDTLS_SHA384_C
+
+/**
+ * \def MBEDTLS_SHA512_C
+ *
+ * Enable SHA-512 cryptographic hash algorithms.
+ *
+ * Module:  library/sha512.c
+ * Caller:  library/entropy.c
+ *          library/md.c
+ *          library/ssl_tls.c
+ *          library/ssl_cookie.c
+ *
+ * This module adds support for SHA-512.
+ */
+#define MBEDTLS_SHA512_C
+
+/**
+ * \def MBEDTLS_SSL_CACHE_C
+ *
+ * Enable simple SSL cache implementation.
+ *
+ * Module:  library/ssl_cache.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_CACHE_C
+ */
+#define MBEDTLS_SSL_CACHE_C
+
+/**
+ * \def MBEDTLS_SSL_COOKIE_C
+ *
+ * Enable basic implementation of DTLS cookies for hello verification.
+ *
+ * Module:  library/ssl_cookie.c
+ * Caller:
+ */
+#define MBEDTLS_SSL_COOKIE_C
+
+/**
+ * \def MBEDTLS_SSL_TICKET_C
+ *
+ * Enable an implementation of TLS server-side callbacks for session tickets.
+ *
+ * Module:  library/ssl_ticket.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_CIPHER_C
+ */
+#define MBEDTLS_SSL_TICKET_C
+
+/**
+ * \def MBEDTLS_SSL_CLI_C
+ *
+ * Enable the SSL/TLS client code.
+ *
+ * Module:  library/ssl_cli.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS client support.
+ */
+#define MBEDTLS_SSL_CLI_C
+
+/**
+ * \def MBEDTLS_SSL_SRV_C
+ *
+ * Enable the SSL/TLS server code.
+ *
+ * Module:  library/ssl_srv.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS server support.
+ */
+#define MBEDTLS_SSL_SRV_C
+
+/**
+ * \def MBEDTLS_SSL_TLS_C
+ *
+ * Enable the generic SSL/TLS code.
+ *
+ * Module:  library/ssl_tls.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *
+ * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C
+ *           and at least one of the MBEDTLS_SSL_PROTO_XXX defines
+ *
+ * This module is required for SSL/TLS.
+ */
+#define MBEDTLS_SSL_TLS_C
+
+/**
+ * \def MBEDTLS_THREADING_C
+ *
+ * Enable the threading abstraction layer.
+ * By default mbed TLS assumes it is used in a non-threaded environment or that
+ * contexts are not shared between threads. If you do intend to use contexts
+ * between threads, you will need to enable this layer to prevent race
+ * conditions. See also our Knowledge Base article about threading:
+ * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading
+ *
+ * Module:  library/threading.c
+ *
+ * This allows different threading implementations (self-implemented or
+ * provided).
+ *
+ * You will have to enable either MBEDTLS_THREADING_ALT or
+ * MBEDTLS_THREADING_PTHREAD.
+ *
+ * Enable this layer to allow use of mutexes within mbed TLS
+ */
+//#define MBEDTLS_THREADING_C
+
+/**
+ * \def MBEDTLS_TIMING_C
+ *
+ * Enable the semi-portable timing interface.
+ *
+ * \note The provided implementation only works on POSIX/Unix (including Linux,
+ * BSD and OS X) and Windows. On other platforms, you can either disable that
+ * module and provide your own implementations of the callbacks needed by
+ * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide
+ * your own implementation of the whole module by setting
+ * \c MBEDTLS_TIMING_ALT in the current file.
+ *
+ * \note See also our Knowledge Base article about porting to a new
+ * environment:
+ * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
+ *
+ * Module:  library/timing.c
+ */
+#define MBEDTLS_TIMING_C
+
+/**
+ * \def MBEDTLS_VERSION_C
+ *
+ * Enable run-time version information.
+ *
+ * Module:  library/version.c
+ *
+ * This module provides run-time version information.
+ */
+#define MBEDTLS_VERSION_C
+
+/**
+ * \def MBEDTLS_X509_USE_C
+ *
+ * Enable X.509 core for using certificates.
+ *
+ * Module:  library/x509.c
+ * Caller:  library/x509_crl.c
+ *          library/x509_crt.c
+ *          library/x509_csr.c
+ *
+ * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C,
+ *           MBEDTLS_PK_PARSE_C
+ *
+ * This module is required for the X.509 parsing modules.
+ */
+#define MBEDTLS_X509_USE_C
+
+/**
+ * \def MBEDTLS_X509_CRT_PARSE_C
+ *
+ * Enable X.509 certificate parsing.
+ *
+ * Module:  library/x509_crt.c
+ * Caller:  library/ssl_cli.c
+ *          library/ssl_srv.c
+ *          library/ssl_tls.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is required for X.509 certificate parsing.
+ */
+#define MBEDTLS_X509_CRT_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CRL_PARSE_C
+ *
+ * Enable X.509 CRL parsing.
+ *
+ * Module:  library/x509_crl.c
+ * Caller:  library/x509_crt.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is required for X.509 CRL parsing.
+ */
+#define MBEDTLS_X509_CRL_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CSR_PARSE_C
+ *
+ * Enable X.509 Certificate Signing Request (CSR) parsing.
+ *
+ * Module:  library/x509_csr.c
+ * Caller:  library/x509_crt_write.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is used for reading X.509 certificate request.
+ */
+#define MBEDTLS_X509_CSR_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CREATE_C
+ *
+ * Enable X.509 core for creating certificates.
+ *
+ * Module:  library/x509_create.c
+ *
+ * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C
+ *
+ * This module is the basis for creating X.509 certificates and CSRs.
+ */
+#define MBEDTLS_X509_CREATE_C
+
+/**
+ * \def MBEDTLS_X509_CRT_WRITE_C
+ *
+ * Enable creating X.509 certificates.
+ *
+ * Module:  library/x509_crt_write.c
+ *
+ * Requires: MBEDTLS_X509_CREATE_C
+ *
+ * This module is required for X.509 certificate creation.
+ */
+#define MBEDTLS_X509_CRT_WRITE_C
+
+/**
+ * \def MBEDTLS_X509_CSR_WRITE_C
+ *
+ * Enable creating X.509 Certificate Signing Requests (CSR).
+ *
+ * Module:  library/x509_csr_write.c
+ *
+ * Requires: MBEDTLS_X509_CREATE_C
+ *
+ * This module is required for X.509 certificate request writing.
+ */
+#define MBEDTLS_X509_CSR_WRITE_C
+
+/* \} name SECTION: mbed TLS modules */
+
+/**
+ * \name SECTION: Module configuration options
+ *
+ * This section allows for the setting of module specific sizes and
+ * configuration options. The default values are already present in the
+ * relevant header files and should suffice for the regular use cases.
+ *
+ * Our advice is to enable options and change their values here
+ * only if you have a good reason and know the consequences.
+ *
+ * Please check the respective header file for documentation on these
+ * parameters (to prevent duplicate documentation).
+ * \{
+ */
+
+/* MPI / BIGNUM options */
+//#define MBEDTLS_MPI_WINDOW_SIZE            6 /**< Maximum window size used. */
+//#define MBEDTLS_MPI_MAX_SIZE            1024 /**< Maximum number of bytes for usable MPIs. */
+
+/* CTR_DRBG options */
+//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN               48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
+//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL        10000 /**< Interval before reseed is performed by default */
+//#define MBEDTLS_CTR_DRBG_MAX_INPUT                256 /**< Maximum number of additional input bytes */
+//#define MBEDTLS_CTR_DRBG_MAX_REQUEST             1024 /**< Maximum number of requested bytes per call */
+//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT           384 /**< Maximum size of (re)seed buffer */
+
+/* HMAC_DRBG options */
+//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL   10000 /**< Interval before reseed is performed by default */
+//#define MBEDTLS_HMAC_DRBG_MAX_INPUT           256 /**< Maximum number of additional input bytes */
+//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST        1024 /**< Maximum number of requested bytes per call */
+//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT      384 /**< Maximum size of (re)seed buffer */
+
+/* ECP options */
+//#define MBEDTLS_ECP_WINDOW_SIZE            4 /**< Maximum window size used */
+//#define MBEDTLS_ECP_FIXED_POINT_OPTIM      1 /**< Enable fixed-point speed-up */
+
+/* Entropy options */
+//#define MBEDTLS_ENTROPY_MAX_SOURCES                20 /**< Maximum number of sources supported */
+//#define MBEDTLS_ENTROPY_MAX_GATHER                128 /**< Maximum amount requested from entropy sources */
+//#define MBEDTLS_ENTROPY_MIN_HARDWARE               32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */
+
+/* Memory buffer allocator options */
+//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE      4 /**< Align on multiples of this value */
+
+/* Platform options */
+//#define MBEDTLS_PLATFORM_STD_MEM_HDR   <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
+//#define MBEDTLS_PLATFORM_STD_CALLOC        calloc /**< Default allocator to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_FREE            free /**< Default free to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT            exit /**< Default exit to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_TIME            time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_STD_FPRINTF      fprintf /**< Default fprintf to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_PRINTF        printf /**< Default printf to use, can be undefined */
+/* Note: your snprintf must correctly zero-terminate the buffer! */
+//#define MBEDTLS_PLATFORM_STD_SNPRINTF    snprintf /**< Default snprintf to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS       0 /**< Default exit value to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE       1 /**< Default exit value to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ   mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE  mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE  "seedfile" /**< Seed file to read/write with default implementation */
+
+/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */
+/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */
+//#define MBEDTLS_PLATFORM_CALLOC_MACRO        calloc /**< Default allocator macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_FREE_MACRO            free /**< Default free macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_EXIT_MACRO            exit /**< Default exit macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_TIME_MACRO            time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO       time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_FPRINTF_MACRO      fprintf /**< Default fprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_PRINTF_MACRO        printf /**< Default printf macro to use, can be undefined */
+/* Note: your snprintf must correctly zero-terminate the buffer! */
+//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO    snprintf /**< Default snprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_VSNPRINTF_MACRO    vsnprintf /**< Default vsnprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO   mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO  mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
+
+/* PSA options */
+/**
+ * Use HMAC_DRBG with the specified hash algorithm for HMAC_DRBG for the
+ * PSA crypto subsystem.
+ *
+ * If this option is unset:
+ * - If CTR_DRBG is available, the PSA subsystem uses it rather than HMAC_DRBG.
+ * - Otherwise, the PSA subsystem uses HMAC_DRBG with either
+ *   #MBEDTLS_MD_SHA512 or #MBEDTLS_MD_SHA256 based on availability and
+ *   on unspecified heuristics.
+ */
+//#define MBEDTLS_PSA_HMAC_DRBG_MD_TYPE MBEDTLS_MD_SHA256
+
+/** \def MBEDTLS_PSA_KEY_SLOT_COUNT
+ * Restrict the PSA library to supporting a maximum amount of simultaneously
+ * loaded keys. A loaded key is a key stored by the PSA Crypto core as a
+ * volatile key, or a persistent key which is loaded temporarily by the
+ * library as part of a crypto operation in flight.
+ *
+ * If this option is unset, the library will fall back to a default value of
+ * 32 keys.
+ */
+//#define MBEDTLS_PSA_KEY_SLOT_COUNT 32
+
+/* SSL Cache options */
+//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT       86400 /**< 1 day  */
+//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES      50 /**< Maximum entries in cache */
+
+/* SSL options */
+
+/** \def MBEDTLS_SSL_IN_CONTENT_LEN
+ *
+ * Maximum length (in bytes) of incoming plaintext fragments.
+ *
+ * This determines the size of the incoming TLS I/O buffer in such a way
+ * that it is capable of holding the specified amount of plaintext data,
+ * regardless of the protection mechanism used.
+ *
+ * \note When using a value less than the default of 16KB on the client, it is
+ *       recommended to use the Maximum Fragment Length (MFL) extension to
+ *       inform the server about this limitation. On the server, there
+ *       is no supported, standardized way of informing the client about
+ *       restriction on the maximum size of incoming messages, and unless
+ *       the limitation has been communicated by other means, it is recommended
+ *       to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN
+ *       while keeping the default value of 16KB for the incoming buffer.
+ *
+ * Uncomment to set the maximum plaintext size of the incoming I/O buffer.
+ */
+//#define MBEDTLS_SSL_IN_CONTENT_LEN              16384
+
+/** \def MBEDTLS_SSL_CID_IN_LEN_MAX
+ *
+ * The maximum length of CIDs used for incoming DTLS messages.
+ *
+ */
+//#define MBEDTLS_SSL_CID_IN_LEN_MAX 32
+
+/** \def MBEDTLS_SSL_CID_OUT_LEN_MAX
+ *
+ * The maximum length of CIDs used for outgoing DTLS messages.
+ *
+ */
+//#define MBEDTLS_SSL_CID_OUT_LEN_MAX 32
+
+/** \def MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY
+ *
+ * This option controls the use of record plaintext padding
+ * in TLS 1.3 and when using the Connection ID extension in DTLS 1.2.
+ *
+ * The padding will always be chosen so that the length of the
+ * padded plaintext is a multiple of the value of this option.
+ *
+ * Note: A value of \c 1 means that no padding will be used
+ *       for outgoing records.
+ *
+ * Note: On systems lacking division instructions,
+ *       a power of two should be preferred.
+ */
+//#define MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 16
+
+/** \def MBEDTLS_SSL_OUT_CONTENT_LEN
+ *
+ * Maximum length (in bytes) of outgoing plaintext fragments.
+ *
+ * This determines the size of the outgoing TLS I/O buffer in such a way
+ * that it is capable of holding the specified amount of plaintext data,
+ * regardless of the protection mechanism used.
+ *
+ * It is possible to save RAM by setting a smaller outward buffer, while keeping
+ * the default inward 16384 byte buffer to conform to the TLS specification.
+ *
+ * The minimum required outward buffer size is determined by the handshake
+ * protocol's usage. Handshaking will fail if the outward buffer is too small.
+ * The specific size requirement depends on the configured ciphers and any
+ * certificate data which is sent during the handshake.
+ *
+ * Uncomment to set the maximum plaintext size of the outgoing I/O buffer.
+ */
+//#define MBEDTLS_SSL_OUT_CONTENT_LEN             16384
+
+/** \def MBEDTLS_SSL_DTLS_MAX_BUFFERING
+ *
+ * Maximum number of heap-allocated bytes for the purpose of
+ * DTLS handshake message reassembly and future message buffering.
+ *
+ * This should be at least 9/8 * MBEDTLSSL_IN_CONTENT_LEN
+ * to account for a reassembled handshake message of maximum size,
+ * together with its reassembly bitmap.
+ *
+ * A value of 2 * MBEDTLS_SSL_IN_CONTENT_LEN (32768 by default)
+ * should be sufficient for all practical situations as it allows
+ * to reassembly a large handshake message (such as a certificate)
+ * while buffering multiple smaller handshake messages.
+ *
+ */
+//#define MBEDTLS_SSL_DTLS_MAX_BUFFERING             32768
+
+//#define MBEDTLS_PSK_MAX_LEN               32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
+//#define MBEDTLS_SSL_COOKIE_TIMEOUT        60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */
+
+/**
+ * Complete list of ciphersuites to use, in order of preference.
+ *
+ * \warning No dependency checking is done on that field! This option can only
+ * be used to restrict the set of available ciphersuites. It is your
+ * responsibility to make sure the needed modules are active.
+ *
+ * Use this to save a few hundred bytes of ROM (default ordering of all
+ * available ciphersuites) and a few to a few hundred bytes of RAM.
+ *
+ * The value below is only an example, not the default.
+ */
+//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+
+/* X509 options */
+//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA   8   /**< Maximum number of intermediate CAs in a verification chain. */
+//#define MBEDTLS_X509_MAX_FILE_PATH_LEN     512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */
+
+/**
+ * Uncomment the macro to let mbed TLS use your alternate implementation of
+ * mbedtls_platform_zeroize(). This replaces the default implementation in
+ * platform_util.c.
+ *
+ * mbedtls_platform_zeroize() is a widely used function across the library to
+ * zero a block of memory. The implementation is expected to be secure in the
+ * sense that it has been written to prevent the compiler from removing calls
+ * to mbedtls_platform_zeroize() as part of redundant code elimination
+ * optimizations. However, it is difficult to guarantee that calls to
+ * mbedtls_platform_zeroize() will not be optimized by the compiler as older
+ * versions of the C language standards do not provide a secure implementation
+ * of memset(). Therefore, MBEDTLS_PLATFORM_ZEROIZE_ALT enables users to
+ * configure their own implementation of mbedtls_platform_zeroize(), for
+ * example by using directives specific to their compiler, features from newer
+ * C standards (e.g using memset_s() in C11) or calling a secure memset() from
+ * their system (e.g explicit_bzero() in BSD).
+ */
+//#define MBEDTLS_PLATFORM_ZEROIZE_ALT
+
+/**
+ * Uncomment the macro to let Mbed TLS use your alternate implementation of
+ * mbedtls_platform_gmtime_r(). This replaces the default implementation in
+ * platform_util.c.
+ *
+ * gmtime() is not a thread-safe function as defined in the C standard. The
+ * library will try to use safer implementations of this function, such as
+ * gmtime_r() when available. However, if Mbed TLS cannot identify the target
+ * system, the implementation of mbedtls_platform_gmtime_r() will default to
+ * using the standard gmtime(). In this case, calls from the library to
+ * gmtime() will be guarded by the global mutex mbedtls_threading_gmtime_mutex
+ * if MBEDTLS_THREADING_C is enabled. We recommend that calls from outside the
+ * library are also guarded with this mutex to avoid race conditions. However,
+ * if the macro MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, Mbed TLS will
+ * unconditionally use the implementation for mbedtls_platform_gmtime_r()
+ * supplied at compile time.
+ */
+//#define MBEDTLS_PLATFORM_GMTIME_R_ALT
+
+/**
+ * Enable the verified implementations of ECDH primitives from Project Everest
+ * (currently only Curve25519). This feature changes the layout of ECDH
+ * contexts and therefore is a compatibility break for applications that access
+ * fields of a mbedtls_ecdh_context structure directly. See also
+ * MBEDTLS_ECDH_LEGACY_CONTEXT in include/mbedtls/ecdh.h.
+ */
+//#define MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
+
+/* \} name SECTION: Customisation configuration options */