| /* |
| * MbedTLS SSL context deserializer from base64 code |
| * |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define MBEDTLS_ALLOW_PRIVATE_ACCESS |
| |
| #include "mbedtls/build_info.h" |
| #include "mbedtls/debug.h" |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| |
| #if !defined(MBEDTLS_X509_CRT_PARSE_C) || !defined(MBEDTLS_ERROR_C) || \ |
| !defined(MBEDTLS_SSL_TLS_C) |
| int main( void ) |
| { |
| printf("MBEDTLS_X509_CRT_PARSE_C and/or MBEDTLS_ERROR_C and/or " |
| "MBEDTLS_SSL_TLS_C not defined.\n"); |
| return( 0 ); |
| } |
| #else |
| |
| #if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) |
| #define _CRT_SECURE_NO_DEPRECATE 1 |
| #endif |
| |
| #include <stdint.h> |
| #include <stdarg.h> |
| #include <string.h> |
| #if defined(MBEDTLS_HAVE_TIME) |
| #include <time.h> |
| #endif |
| #include "mbedtls/ssl.h" |
| #include "mbedtls/error.h" |
| #include "mbedtls/base64.h" |
| #include "mbedtls/md.h" |
| #include "mbedtls/x509_crt.h" |
| #include "mbedtls/ssl_ciphersuites.h" |
| |
| /* |
| * This program version |
| */ |
| #define PROG_NAME "ssl_context_info" |
| #define VER_MAJOR 0 |
| #define VER_MINOR 1 |
| |
| /* |
| * Flags copied from the Mbed TLS library. |
| */ |
| #define SESSION_CONFIG_TIME_BIT ( 1 << 0 ) |
| #define SESSION_CONFIG_CRT_BIT ( 1 << 1 ) |
| #define SESSION_CONFIG_CLIENT_TICKET_BIT ( 1 << 2 ) |
| #define SESSION_CONFIG_MFL_BIT ( 1 << 3 ) |
| #define SESSION_CONFIG_TRUNC_HMAC_BIT ( 1 << 4 ) |
| #define SESSION_CONFIG_ETM_BIT ( 1 << 5 ) |
| #define SESSION_CONFIG_TICKET_BIT ( 1 << 6 ) |
| |
| #define CONTEXT_CONFIG_DTLS_CONNECTION_ID_BIT ( 1 << 0 ) |
| #define CONTEXT_CONFIG_DTLS_BADMAC_LIMIT_BIT ( 1 << 1 ) |
| #define CONTEXT_CONFIG_DTLS_ANTI_REPLAY_BIT ( 1 << 2 ) |
| #define CONTEXT_CONFIG_ALPN_BIT ( 1 << 3 ) |
| |
| #define TRANSFORM_RANDBYTE_LEN 64 |
| |
| /* |
| * Minimum and maximum number of bytes for specific data: context, sessions, |
| * certificates, tickets and buffers in the program. The context and session |
| * size values have been calculated based on the 'print_deserialized_ssl_context()' |
| * and 'print_deserialized_ssl_session()' content. |
| */ |
| #define MIN_CONTEXT_LEN 84 |
| #define MIN_SESSION_LEN 88 |
| |
| #define MAX_CONTEXT_LEN 875 /* without session data */ |
| #define MAX_SESSION_LEN 109 /* without certificate and ticket data */ |
| #define MAX_CERTIFICATE_LEN ( ( 1 << 24 ) - 1 ) |
| #define MAX_TICKET_LEN ( ( 1 << 24 ) - 1 ) |
| |
| #define MIN_SERIALIZED_DATA ( MIN_CONTEXT_LEN + MIN_SESSION_LEN ) |
| #define MAX_SERIALIZED_DATA ( MAX_CONTEXT_LEN + MAX_SESSION_LEN + \ |
| MAX_CERTIFICATE_LEN + MAX_TICKET_LEN ) |
| |
| #define MIN_BASE64_LEN ( MIN_SERIALIZED_DATA * 4 / 3 ) |
| #define MAX_BASE64_LEN ( MAX_SERIALIZED_DATA * 4 / 3 + 3 ) |
| |
| /* |
| * A macro that prevents from reading out of the ssl buffer range. |
| */ |
| #define CHECK_SSL_END( LEN ) \ |
| do \ |
| { \ |
| if( end - ssl < (int)( LEN ) ) \ |
| { \ |
| printf_err( "%s", buf_ln_err ); \ |
| return; \ |
| } \ |
| } while( 0 ) |
| |
| /* |
| * Global values |
| */ |
| FILE *b64_file = NULL; /* file with base64 codes to deserialize */ |
| char conf_keep_peer_certificate = 1; /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE from mbedTLS configuration */ |
| char conf_dtls_proto = 1; /* MBEDTLS_SSL_PROTO_DTLS from mbedTLS configuration */ |
| char debug = 0; /* flag for debug messages */ |
| const char alloc_err[] = "Cannot allocate memory\n"; |
| const char buf_ln_err[] = "Buffer does not have enough data to complete the parsing\n"; |
| |
| /* |
| * Basic printing functions |
| */ |
| void print_version( ) |
| { |
| printf( "%s v%d.%d\n", PROG_NAME, VER_MAJOR, VER_MINOR ); |
| } |
| |
| void print_usage( ) |
| { |
| print_version(); |
| printf( "\nThis program is used to deserialize an Mbed TLS SSL session from the base64 code provided\n" |
| "in the text file. The program can deserialize many codes from one file, but they must be\n" |
| "separated, e.g. by a newline.\n\n" ); |
| printf( |
| "Usage:\n" |
| "\t-f path - Path to the file with base64 code\n" |
| "\t-v - Show version\n" |
| "\t-h - Show this usage\n" |
| "\t-d - Print more information\n" |
| "\t--keep-peer-cert=0 - Use this option if you know that the Mbed TLS library\n" |
| "\t has been compiled with the MBEDTLS_SSL_KEEP_PEER_CERTIFICATE\n" |
| "\t flag. You can also use it if there are some problems with reading\n" |
| "\t the information about certificate\n" |
| "\t--dtls-protocol=0 - Use this option if you know that the Mbed TLS library\n" |
| "\t has been compiled without the MBEDTLS_SSL_PROTO_DTLS flag\n" |
| "\n" |
| ); |
| } |
| |
| void printf_dbg( const char *str, ... ) |
| { |
| if( debug ) |
| { |
| va_list args; |
| va_start( args, str ); |
| printf( "debug: " ); |
| vprintf( str, args ); |
| fflush( stdout ); |
| va_end( args ); |
| } |
| } |
| |
| MBEDTLS_PRINTF_ATTRIBUTE( 1, 2 ) |
| void printf_err( const char *str, ... ) |
| { |
| va_list args; |
| va_start( args, str ); |
| fflush( stdout ); |
| fprintf( stderr, "ERROR: " ); |
| vfprintf( stderr, str, args ); |
| fflush( stderr ); |
| va_end( args ); |
| } |
| |
| /* |
| * Exit from the program in case of error |
| */ |
| void error_exit() |
| { |
| if( NULL != b64_file ) |
| { |
| fclose( b64_file ); |
| } |
| exit( -1 ); |
| } |
| |
| /* |
| * This function takes the input arguments of this program |
| */ |
| void parse_arguments( int argc, char *argv[] ) |
| { |
| int i = 1; |
| |
| if( argc < 2 ) |
| { |
| print_usage(); |
| error_exit(); |
| } |
| |
| while( i < argc ) |
| { |
| if( strcmp( argv[i], "-d" ) == 0 ) |
| { |
| debug = 1; |
| } |
| else if( strcmp( argv[i], "-h" ) == 0 ) |
| { |
| print_usage(); |
| } |
| else if( strcmp( argv[i], "-v" ) == 0 ) |
| { |
| print_version(); |
| } |
| else if( strcmp( argv[i], "-f" ) == 0 ) |
| { |
| if( ++i >= argc ) |
| { |
| printf_err( "File path is empty\n" ); |
| error_exit(); |
| } |
| |
| if( NULL != b64_file ) |
| { |
| printf_err( "Cannot specify more than one file with -f\n" ); |
| error_exit( ); |
| } |
| |
| if( ( b64_file = fopen( argv[i], "r" )) == NULL ) |
| { |
| printf_err( "Cannot find file \"%s\"\n", argv[i] ); |
| error_exit(); |
| } |
| } |
| else if( strcmp( argv[i], "--keep-peer-cert=0" ) == 0 ) |
| { |
| conf_keep_peer_certificate = 0; |
| } |
| else if( strcmp( argv[i], "--dtls-protocol=0" ) == 0 ) |
| { |
| conf_dtls_proto = 0; |
| } |
| else |
| { |
| print_usage(); |
| error_exit(); |
| } |
| |
| i++; |
| } |
| } |
| |
| /* |
| * This function prints base64 code to the stdout |
| */ |
| void print_b64( const uint8_t *b, size_t len ) |
| { |
| size_t i = 0; |
| const uint8_t *end = b + len; |
| printf("\t"); |
| while( b < end ) |
| { |
| if( ++i > 75 ) |
| { |
| printf( "\n\t" ); |
| i = 0; |
| } |
| printf( "%c", *b++ ); |
| } |
| printf( "\n" ); |
| fflush( stdout ); |
| } |
| |
| /* |
| * This function prints hex code from the buffer to the stdout. |
| * |
| * /p b buffer with data to print |
| * /p len number of bytes to print |
| * /p in_line number of bytes in one line |
| * /p prefix prefix for the new lines |
| */ |
| void print_hex( const uint8_t *b, size_t len, |
| const size_t in_line, const char *prefix ) |
| { |
| size_t i = 0; |
| const uint8_t *end = b + len; |
| |
| if( prefix == NULL ) |
| { |
| prefix = ""; |
| } |
| |
| while( b < end ) |
| { |
| if( ++i > in_line ) |
| { |
| printf( "\n%s", prefix ); |
| i = 1; |
| } |
| printf( "%02X ", (uint8_t) *b++ ); |
| } |
| printf("\n"); |
| fflush(stdout); |
| } |
| |
| /* |
| * Print the value of time_t in format e.g. 2020-01-23 13:05:59 |
| */ |
| void print_time( const uint64_t *time ) |
| { |
| #if defined(MBEDTLS_HAVE_TIME) |
| char buf[20]; |
| struct tm *t = gmtime( (time_t*) time ); |
| static const char format[] = "%Y-%m-%d %H:%M:%S"; |
| if( NULL != t ) |
| { |
| strftime( buf, sizeof( buf ), format, t ); |
| printf( "%s\n", buf ); |
| } |
| else |
| { |
| printf( "unknown\n" ); |
| } |
| #else |
| (void) time; |
| printf( "not supported\n" ); |
| #endif |
| } |
| |
| /* |
| * Print the input string if the bit is set in the value |
| */ |
| void print_if_bit( const char *str, int bit, int val ) |
| { |
| if( bit & val ) |
| { |
| printf( "\t%s\n", str ); |
| } |
| } |
| |
| /* |
| * Return pointer to hardcoded "enabled" or "disabled" depending on the input value |
| */ |
| const char * get_enabled_str( int is_en ) |
| { |
| return ( is_en ) ? "enabled" : "disabled"; |
| } |
| |
| /* |
| * Return pointer to hardcoded MFL string value depending on the MFL code at the input |
| */ |
| const char * get_mfl_str( int mfl_code ) |
| { |
| switch( mfl_code ) |
| { |
| case MBEDTLS_SSL_MAX_FRAG_LEN_NONE: |
| return "none"; |
| case MBEDTLS_SSL_MAX_FRAG_LEN_512: |
| return "512"; |
| case MBEDTLS_SSL_MAX_FRAG_LEN_1024: |
| return "1024"; |
| case MBEDTLS_SSL_MAX_FRAG_LEN_2048: |
| return "2048"; |
| case MBEDTLS_SSL_MAX_FRAG_LEN_4096: |
| return "4096"; |
| default: |
| return "error"; |
| } |
| } |
| |
| /* |
| * Read next base64 code from the 'b64_file'. The 'b64_file' must be opened |
| * previously. After each call to this function, the internal file position |
| * indicator of the global b64_file is advanced. |
| * |
| * Note - This function checks the size of the input buffer and if necessary, |
| * increases it to the maximum MAX_BASE64_LEN |
| * |
| * /p b64 pointer to the pointer of the buffer for input data |
| * /p max_len pointer to the current buffer capacity. It can be changed if |
| * the buffer needs to be increased |
| * |
| * \retval number of bytes written in to the b64 buffer or 0 in case no more |
| * data was found |
| */ |
| size_t read_next_b64_code( uint8_t **b64, size_t *max_len ) |
| { |
| int valid_balance = 0; /* balance between valid and invalid characters */ |
| size_t len = 0; |
| char pad = 0; |
| int c = 0; |
| |
| while( EOF != c ) |
| { |
| char c_valid = 0; |
| |
| c = fgetc( b64_file ); |
| |
| if( pad > 0 ) |
| { |
| if( c == '=' && pad == 1 ) |
| { |
| c_valid = 1; |
| pad = 2; |
| } |
| } |
| else if( ( c >= 'A' && c <= 'Z' ) || |
| ( c >= 'a' && c <= 'z' ) || |
| ( c >= '0' && c <= '9' ) || |
| c == '+' || c == '/' ) |
| { |
| c_valid = 1; |
| } |
| else if( c == '=' ) |
| { |
| c_valid = 1; |
| pad = 1; |
| } |
| else if( c == '-' ) |
| { |
| c = '+'; |
| c_valid = 1; |
| } |
| else if( c == '_' ) |
| { |
| c = '/'; |
| c_valid = 1; |
| } |
| |
| if( c_valid ) |
| { |
| /* A string of characters that could be a base64 code. */ |
| valid_balance++; |
| |
| if( len < *max_len ) |
| { |
| ( *b64 )[ len++ ] = c; |
| } |
| else if( *max_len < MAX_BASE64_LEN ) |
| { |
| /* Current buffer is too small, but can be resized. */ |
| void *ptr; |
| size_t new_size = ( MAX_BASE64_LEN - 4096 > *max_len ) ? |
| *max_len + 4096 : MAX_BASE64_LEN; |
| |
| ptr = realloc( *b64, new_size ); |
| if( NULL == ptr ) |
| { |
| printf_err( alloc_err ); |
| return 0; |
| } |
| *b64 = ptr; |
| *max_len = new_size; |
| ( *b64 )[ len++ ] = c; |
| } |
| else |
| { |
| /* Too much data so it will be treated as invalid */ |
| len++; |
| } |
| } |
| else if( len > 0 ) |
| { |
| /* End of a string that could be a base64 code, but need to check |
| * that the length of the characters is correct. */ |
| |
| valid_balance--; |
| |
| if( len < MIN_CONTEXT_LEN ) |
| { |
| printf_dbg( "The code found is too small to be a SSL context.\n" ); |
| len = pad = 0; |
| } |
| else if( len > *max_len ) |
| { |
| printf_err( "The code found is too large by %" MBEDTLS_PRINTF_SIZET " bytes.\n", |
| len - *max_len ); |
| len = pad = 0; |
| } |
| else if( len % 4 != 0 ) |
| { |
| printf_err( "The length of the base64 code found should be a multiple of 4.\n" ); |
| len = pad = 0; |
| } |
| else |
| { |
| /* Base64 code with valid character length. */ |
| return len; |
| } |
| } |
| else |
| { |
| valid_balance--; |
| } |
| |
| /* Detection of potentially wrong file format like: binary, zip, ISO, etc. */ |
| if( valid_balance < -100 ) |
| { |
| printf_err( "Too many bad symbols detected. File check aborted.\n" ); |
| return 0; |
| } |
| } |
| |
| printf_dbg( "End of file\n" ); |
| return 0; |
| } |
| |
| #if !defined(MBEDTLS_X509_REMOVE_INFO) |
| /* |
| * This function deserializes and prints to the stdout all obtained information |
| * about the certificates from provided data. |
| * |
| * /p ssl pointer to serialized certificate |
| * /p len number of bytes in the buffer |
| */ |
| void print_deserialized_ssl_cert( const uint8_t *ssl, uint32_t len ) |
| { |
| enum { STRLEN = 4096 }; |
| mbedtls_x509_crt crt; |
| int ret; |
| char str[STRLEN]; |
| |
| printf( "\nCertificate:\n" ); |
| |
| mbedtls_x509_crt_init( &crt ); |
| ret = mbedtls_x509_crt_parse_der( &crt, ssl, len ); |
| if( 0 != ret ) |
| { |
| mbedtls_strerror( ret, str, STRLEN ); |
| printf_err( "Invalid format of X.509 - %s\n", str ); |
| printf( "Cannot deserialize:\n\t" ); |
| print_hex( ssl, len, 25, "\t" ); |
| } |
| else |
| { |
| mbedtls_x509_crt *current = &crt; |
| |
| while( current != NULL ) |
| { |
| ret = mbedtls_x509_crt_info( str, STRLEN, "\t", current ); |
| if( 0 > ret ) |
| { |
| mbedtls_strerror( ret, str, STRLEN ); |
| printf_err( "Cannot write to the output - %s\n", str ); |
| } |
| else |
| { |
| printf( "%s", str ); |
| } |
| |
| current = current->next; |
| |
| if( current ) |
| { |
| printf( "\n" ); |
| } |
| |
| } |
| } |
| |
| mbedtls_x509_crt_free( &crt ); |
| } |
| #endif /* !MBEDTLS_X509_REMOVE_INFO */ |
| |
| /* |
| * This function deserializes and prints to the stdout all obtained information |
| * about the session from provided data. This function was built based on |
| * mbedtls_ssl_session_load(). mbedtls_ssl_session_load() could not be used |
| * due to dependencies on the mbedTLS configuration. |
| * |
| * The data structure in the buffer: |
| * uint64 start_time; |
| * uint8 ciphersuite[2]; // defined by the standard |
| * uint8 compression; // 0 or 1 |
| * uint8 session_id_len; // at most 32 |
| * opaque session_id[32]; |
| * opaque master[48]; // fixed length in the standard |
| * uint32 verify_result; |
| * opaque peer_cert<0..2^24-1>; // length 0 means no peer cert |
| * opaque ticket<0..2^24-1>; // length 0 means no ticket |
| * uint32 ticket_lifetime; |
| * uint8 mfl_code; // up to 255 according to standard |
| * uint8 trunc_hmac; // 0 or 1 |
| * uint8 encrypt_then_mac; // 0 or 1 |
| * |
| * /p ssl pointer to serialized session |
| * /p len number of bytes in the buffer |
| * /p session_cfg_flag session configuration flags |
| */ |
| void print_deserialized_ssl_session( const uint8_t *ssl, uint32_t len, |
| int session_cfg_flag ) |
| { |
| const struct mbedtls_ssl_ciphersuite_t * ciphersuite_info; |
| int ciphersuite_id; |
| uint32_t cert_len, ticket_len; |
| uint32_t verify_result, ticket_lifetime; |
| const uint8_t *end = ssl + len; |
| |
| printf( "\nSession info:\n" ); |
| |
| if( session_cfg_flag & SESSION_CONFIG_TIME_BIT ) |
| { |
| uint64_t start; |
| CHECK_SSL_END( 8 ); |
| start = ( (uint64_t) ssl[0] << 56 ) | |
| ( (uint64_t) ssl[1] << 48 ) | |
| ( (uint64_t) ssl[2] << 40 ) | |
| ( (uint64_t) ssl[3] << 32 ) | |
| ( (uint64_t) ssl[4] << 24 ) | |
| ( (uint64_t) ssl[5] << 16 ) | |
| ( (uint64_t) ssl[6] << 8 ) | |
| ( (uint64_t) ssl[7] ); |
| ssl += 8; |
| printf( "\tstart time : " ); |
| print_time( &start ); |
| } |
| |
| CHECK_SSL_END( 2 ); |
| ciphersuite_id = ( (int) ssl[0] << 8 ) | (int) ssl[1]; |
| printf_dbg( "Ciphersuite ID: %d\n", ciphersuite_id ); |
| ssl += 2; |
| |
| ciphersuite_info = mbedtls_ssl_ciphersuite_from_id( ciphersuite_id ); |
| if( ciphersuite_info == NULL ) |
| { |
| printf_err( "Cannot find ciphersuite info\n" ); |
| } |
| else |
| { |
| const mbedtls_cipher_info_t *cipher_info; |
| const mbedtls_md_info_t *md_info; |
| |
| printf( "\tciphersuite : %s\n", ciphersuite_info->name ); |
| printf( "\tcipher flags : 0x%02X\n", ciphersuite_info->flags ); |
| |
| cipher_info = mbedtls_cipher_info_from_type( ciphersuite_info->cipher ); |
| if( cipher_info == NULL ) |
| { |
| printf_err( "Cannot find cipher info\n" ); |
| } |
| else |
| { |
| printf( "\tcipher : %s\n", cipher_info->name ); |
| } |
| |
| md_info = mbedtls_md_info_from_type( ciphersuite_info->mac ); |
| if( md_info == NULL ) |
| { |
| printf_err( "Cannot find Message-Digest info\n" ); |
| } |
| else |
| { |
| printf( "\tMessage-Digest : %s\n", mbedtls_md_get_name( md_info ) ); |
| } |
| } |
| |
| CHECK_SSL_END( 1 ); |
| printf( "\tcompression : %s\n", get_enabled_str( *ssl++ ) ); |
| |
| /* Note - Here we can get session ID length from serialized data, but we |
| * use hardcoded 32-bytes length. This approach was taken from |
| * 'mbedtls_ssl_session_load()'. */ |
| CHECK_SSL_END( 1 + 32 ); |
| printf_dbg( "Session id length: %u\n", (uint32_t) *ssl++ ); |
| printf( "\tsession ID : "); |
| print_hex( ssl, 32, 16, "\t " ); |
| ssl += 32; |
| |
| printf( "\tmaster secret : "); |
| CHECK_SSL_END( 48 ); |
| print_hex( ssl, 48, 16, "\t " ); |
| ssl += 48; |
| |
| CHECK_SSL_END( 4 ); |
| verify_result = ( (uint32_t) ssl[0] << 24 ) | |
| ( (uint32_t) ssl[1] << 16 ) | |
| ( (uint32_t) ssl[2] << 8 ) | |
| ( (uint32_t) ssl[3] ); |
| ssl += 4; |
| printf( "\tverify result : 0x%08X\n", verify_result ); |
| |
| if( SESSION_CONFIG_CRT_BIT & session_cfg_flag ) |
| { |
| if( conf_keep_peer_certificate ) |
| { |
| CHECK_SSL_END( 3 ); |
| cert_len = ( (uint32_t) ssl[0] << 16 ) | |
| ( (uint32_t) ssl[1] << 8 ) | |
| ( (uint32_t) ssl[2] ); |
| ssl += 3; |
| printf_dbg( "Certificate length: %u\n", cert_len ); |
| |
| if( cert_len > 0 ) |
| { |
| CHECK_SSL_END( cert_len ); |
| #if !defined(MBEDTLS_X509_REMOVE_INFO) |
| print_deserialized_ssl_cert( ssl, cert_len ); |
| #endif |
| ssl += cert_len; |
| } |
| } |
| else |
| { |
| printf( "\tPeer digest : " ); |
| |
| CHECK_SSL_END( 1 ); |
| switch( (mbedtls_md_type_t) *ssl++ ) |
| { |
| case MBEDTLS_MD_NONE: |
| printf( "none\n" ); |
| break; |
| case MBEDTLS_MD_MD5: |
| printf( "MD5\n" ); |
| break; |
| case MBEDTLS_MD_SHA1: |
| printf( "SHA1\n" ); |
| break; |
| case MBEDTLS_MD_SHA224: |
| printf( "SHA224\n" ); |
| break; |
| case MBEDTLS_MD_SHA256: |
| printf( "SHA256\n" ); |
| break; |
| case MBEDTLS_MD_SHA384: |
| printf( "SHA384\n" ); |
| break; |
| case MBEDTLS_MD_SHA512: |
| printf( "SHA512\n" ); |
| break; |
| case MBEDTLS_MD_RIPEMD160: |
| printf( "RIPEMD160\n" ); |
| break; |
| default: |
| printf( "undefined or erroneous\n" ); |
| break; |
| } |
| |
| CHECK_SSL_END( 1 ); |
| cert_len = (uint32_t) *ssl++; |
| printf_dbg( "Message-Digest length: %u\n", cert_len ); |
| |
| if( cert_len > 0 ) |
| { |
| printf( "\tPeer digest cert : " ); |
| CHECK_SSL_END( cert_len ); |
| print_hex( ssl, cert_len, 16, "\t " ); |
| ssl += cert_len; |
| } |
| } |
| } |
| |
| if( SESSION_CONFIG_CLIENT_TICKET_BIT & session_cfg_flag ) |
| { |
| printf( "\nTicket:\n" ); |
| |
| CHECK_SSL_END( 3 ); |
| ticket_len = ( (uint32_t) ssl[0] << 16 ) | |
| ( (uint32_t) ssl[1] << 8 ) | |
| ( (uint32_t) ssl[2] ); |
| ssl += 3; |
| printf_dbg( "Ticket length: %u\n", ticket_len ); |
| |
| if( ticket_len > 0 ) |
| { |
| printf( "\t" ); |
| CHECK_SSL_END( ticket_len ); |
| print_hex( ssl, ticket_len, 22, "\t" ); |
| ssl += ticket_len; |
| printf( "\n" ); |
| } |
| |
| CHECK_SSL_END( 4 ); |
| ticket_lifetime = ( (uint32_t) ssl[0] << 24 ) | |
| ( (uint32_t) ssl[1] << 16 ) | |
| ( (uint32_t) ssl[2] << 8 ) | |
| ( (uint32_t) ssl[3] ); |
| ssl += 4; |
| printf( "\tlifetime : %u sec.\n", ticket_lifetime ); |
| } |
| |
| if( ssl < end ) |
| { |
| printf( "\nSession others:\n" ); |
| } |
| |
| if( SESSION_CONFIG_MFL_BIT & session_cfg_flag ) |
| { |
| CHECK_SSL_END( 1 ); |
| printf( "\tMFL : %s\n", get_mfl_str( *ssl++ ) ); |
| } |
| |
| if( SESSION_CONFIG_TRUNC_HMAC_BIT & session_cfg_flag ) |
| { |
| CHECK_SSL_END( 1 ); |
| printf( "\tnegotiate truncated HMAC : %s\n", get_enabled_str( *ssl++ ) ); |
| } |
| |
| if( SESSION_CONFIG_ETM_BIT & session_cfg_flag ) |
| { |
| CHECK_SSL_END( 1 ); |
| printf( "\tEncrypt-then-MAC : %s\n", get_enabled_str( *ssl++ ) ); |
| } |
| |
| if( 0 != ( end - ssl ) ) |
| { |
| printf_err( "%i bytes left to analyze from session\n", (int32_t)( end - ssl ) ); |
| } |
| } |
| |
| /* |
| * This function deserializes and prints to the stdout all obtained information |
| * about the context from provided data. This function was built based on |
| * mbedtls_ssl_context_load(). mbedtls_ssl_context_load() could not be used |
| * due to dependencies on the mbedTLS configuration and the configuration of |
| * the context when serialization was created. |
| * |
| * The data structure in the buffer: |
| * // header |
| * uint8 version[3]; |
| * uint8 configuration[5]; |
| * // session sub-structure |
| * uint32_t session_len; |
| * opaque session<1..2^32-1>; // see mbedtls_ssl_session_save() |
| * // transform sub-structure |
| * uint8 random[64]; // ServerHello.random+ClientHello.random |
| * uint8 in_cid_len; |
| * uint8 in_cid<0..2^8-1> // Connection ID: expected incoming value |
| * uint8 out_cid_len; |
| * uint8 out_cid<0..2^8-1> // Connection ID: outgoing value to use |
| * // fields from ssl_context |
| * uint32 badmac_seen; // DTLS: number of records with failing MAC |
| * uint64 in_window_top; // DTLS: last validated record seq_num |
| * uint64 in_window; // DTLS: bitmask for replay protection |
| * uint8 disable_datagram_packing; // DTLS: only one record per datagram |
| * uint64 cur_out_ctr; // Record layer: outgoing sequence number |
| * uint16 mtu; // DTLS: path mtu (max outgoing fragment size) |
| * uint8 alpn_chosen_len; |
| * uint8 alpn_chosen<0..2^8-1> // ALPN: negotiated application protocol |
| * |
| * /p ssl pointer to serialized session |
| * /p len number of bytes in the buffer |
| */ |
| void print_deserialized_ssl_context( const uint8_t *ssl, size_t len ) |
| { |
| const uint8_t *end = ssl + len; |
| uint32_t session_len; |
| int session_cfg_flag; |
| int context_cfg_flag; |
| |
| printf( "\nMbed TLS version:\n" ); |
| |
| CHECK_SSL_END( 3 + 2 + 3 ); |
| |
| printf( "\tmajor %u\n", (uint32_t) *ssl++ ); |
| printf( "\tminor %u\n", (uint32_t) *ssl++ ); |
| printf( "\tpath %u\n", (uint32_t) *ssl++ ); |
| |
| printf( "\nEnabled session and context configuration:\n" ); |
| |
| session_cfg_flag = ( (int) ssl[0] << 8 ) | ( (int) ssl[1] ); |
| ssl += 2; |
| |
| context_cfg_flag = ( (int) ssl[0] << 16 ) | |
| ( (int) ssl[1] << 8 ) | |
| ( (int) ssl[2] ) ; |
| ssl += 3; |
| |
| printf_dbg( "Session config flags 0x%04X\n", session_cfg_flag ); |
| printf_dbg( "Context config flags 0x%06X\n", context_cfg_flag ); |
| |
| print_if_bit( "MBEDTLS_HAVE_TIME", SESSION_CONFIG_TIME_BIT, session_cfg_flag ); |
| print_if_bit( "MBEDTLS_X509_CRT_PARSE_C", SESSION_CONFIG_CRT_BIT, session_cfg_flag ); |
| print_if_bit( "MBEDTLS_SSL_MAX_FRAGMENT_LENGTH", SESSION_CONFIG_MFL_BIT, session_cfg_flag ); |
| print_if_bit( "MBEDTLS_SSL_ENCRYPT_THEN_MAC", SESSION_CONFIG_ETM_BIT, session_cfg_flag ); |
| print_if_bit( "MBEDTLS_SSL_SESSION_TICKETS", SESSION_CONFIG_TICKET_BIT, session_cfg_flag ); |
| print_if_bit( "MBEDTLS_SSL_SESSION_TICKETS and client", SESSION_CONFIG_CLIENT_TICKET_BIT, session_cfg_flag ); |
| |
| print_if_bit( "MBEDTLS_SSL_DTLS_CONNECTION_ID", CONTEXT_CONFIG_DTLS_CONNECTION_ID_BIT, context_cfg_flag ); |
| print_if_bit( "MBEDTLS_SSL_DTLS_ANTI_REPLAY", CONTEXT_CONFIG_DTLS_ANTI_REPLAY_BIT, context_cfg_flag ); |
| print_if_bit( "MBEDTLS_SSL_ALPN", CONTEXT_CONFIG_ALPN_BIT, context_cfg_flag ); |
| |
| CHECK_SSL_END( 4 ); |
| session_len = ( (uint32_t) ssl[0] << 24 ) | |
| ( (uint32_t) ssl[1] << 16 ) | |
| ( (uint32_t) ssl[2] << 8 ) | |
| ( (uint32_t) ssl[3] ); |
| ssl += 4; |
| printf_dbg( "Session length %u\n", session_len ); |
| |
| CHECK_SSL_END( session_len ); |
| print_deserialized_ssl_session( ssl, session_len, session_cfg_flag ); |
| ssl += session_len; |
| |
| printf( "\nRandom bytes:\n\t"); |
| |
| CHECK_SSL_END( TRANSFORM_RANDBYTE_LEN ); |
| print_hex( ssl, TRANSFORM_RANDBYTE_LEN, 22, "\t" ); |
| ssl += TRANSFORM_RANDBYTE_LEN; |
| |
| printf( "\nContext others:\n" ); |
| |
| if( CONTEXT_CONFIG_DTLS_CONNECTION_ID_BIT & context_cfg_flag ) |
| { |
| uint8_t cid_len; |
| |
| CHECK_SSL_END( 1 ); |
| cid_len = *ssl++; |
| printf_dbg( "In CID length %u\n", (uint32_t) cid_len ); |
| |
| printf( "\tin CID : " ); |
| if( cid_len > 0 ) |
| { |
| CHECK_SSL_END( cid_len ); |
| print_hex( ssl, cid_len, 20, "\t" ); |
| ssl += cid_len; |
| } |
| else |
| { |
| printf( "none\n" ); |
| } |
| |
| CHECK_SSL_END( 1 ); |
| cid_len = *ssl++; |
| printf_dbg( "Out CID length %u\n", (uint32_t) cid_len ); |
| |
| printf( "\tout CID : " ); |
| if( cid_len > 0 ) |
| { |
| CHECK_SSL_END( cid_len ); |
| print_hex( ssl, cid_len, 20, "\t" ); |
| ssl += cid_len; |
| } |
| else |
| { |
| printf( "none\n" ); |
| } |
| } |
| |
| if( CONTEXT_CONFIG_DTLS_BADMAC_LIMIT_BIT & context_cfg_flag ) |
| { |
| uint32_t badmac_seen; |
| |
| CHECK_SSL_END( 4 ); |
| badmac_seen = ( (uint32_t) ssl[0] << 24 ) | |
| ( (uint32_t) ssl[1] << 16 ) | |
| ( (uint32_t) ssl[2] << 8 ) | |
| ( (uint32_t) ssl[3] ); |
| ssl += 4; |
| printf( "\tbad MAC seen number : %u\n", badmac_seen ); |
| |
| /* value 'in_window_top' from mbedtls_ssl_context */ |
| printf( "\tlast validated record sequence no. : " ); |
| CHECK_SSL_END( 8 ); |
| print_hex( ssl, 8, 20, "" ); |
| ssl += 8; |
| |
| /* value 'in_window' from mbedtls_ssl_context */ |
| printf( "\tbitmask for replay detection : " ); |
| CHECK_SSL_END( 8 ); |
| print_hex( ssl, 8, 20, "" ); |
| ssl += 8; |
| } |
| |
| if( conf_dtls_proto ) |
| { |
| CHECK_SSL_END( 1 ); |
| printf( "\tDTLS datagram packing : %s\n", |
| get_enabled_str( ! ( *ssl++ ) ) ); |
| } |
| |
| /* value 'cur_out_ctr' from mbedtls_ssl_context */ |
| printf( "\toutgoing record sequence no. : "); |
| CHECK_SSL_END( 8 ); |
| print_hex( ssl, 8, 20, "" ); |
| ssl += 8; |
| |
| if( conf_dtls_proto ) |
| { |
| uint16_t mtu; |
| CHECK_SSL_END( 2 ); |
| mtu = ( ssl[0] << 8 ) | ssl[1]; |
| ssl += 2; |
| printf( "\tMTU : %u\n", mtu ); |
| } |
| |
| |
| if( CONTEXT_CONFIG_ALPN_BIT & context_cfg_flag ) |
| { |
| uint8_t alpn_len; |
| |
| CHECK_SSL_END( 1 ); |
| alpn_len = *ssl++; |
| printf_dbg( "ALPN length %u\n", (uint32_t) alpn_len ); |
| |
| printf( "\tALPN negotiation : " ); |
| CHECK_SSL_END( alpn_len ); |
| if( alpn_len > 0 ) |
| { |
| if( strlen( (const char*) ssl ) == alpn_len ) |
| { |
| printf( "%s\n", ssl ); |
| } |
| else |
| { |
| printf( "\n" ); |
| printf_err( "\tALPN negotiation is incorrect\n" ); |
| } |
| ssl += alpn_len; |
| } |
| else |
| { |
| printf( "not selected\n" ); |
| } |
| } |
| |
| if( 0 != ( end - ssl ) ) |
| { |
| printf_err( "%i bytes left to analyze from context\n", (int32_t)( end - ssl ) ); |
| } |
| printf( "\n" ); |
| } |
| |
| int main( int argc, char *argv[] ) |
| { |
| enum { SSL_INIT_LEN = 4096 }; |
| |
| uint32_t b64_counter = 0; |
| uint8_t *b64_buf = NULL; |
| uint8_t *ssl_buf = NULL; |
| size_t b64_max_len = SSL_INIT_LEN; |
| size_t ssl_max_len = SSL_INIT_LEN; |
| size_t ssl_len = 0; |
| |
| /* The 'b64_file' is opened when parsing arguments to check that the |
| * file name is correct */ |
| parse_arguments( argc, argv ); |
| |
| if( NULL != b64_file ) |
| { |
| b64_buf = malloc( SSL_INIT_LEN ); |
| ssl_buf = malloc( SSL_INIT_LEN ); |
| |
| if( NULL == b64_buf || NULL == ssl_buf ) |
| { |
| printf_err( alloc_err ); |
| fclose( b64_file ); |
| b64_file = NULL; |
| } |
| } |
| |
| while( NULL != b64_file ) |
| { |
| size_t b64_len = read_next_b64_code( &b64_buf, &b64_max_len ); |
| if( b64_len > 0) |
| { |
| int ret; |
| size_t ssl_required_len = b64_len * 3 / 4 + 1; |
| |
| /* Allocate more memory if necessary. */ |
| if( ssl_required_len > ssl_max_len ) |
| { |
| void *ptr = realloc( ssl_buf, ssl_required_len ); |
| if( NULL == ptr ) |
| { |
| printf_err( alloc_err ); |
| fclose( b64_file ); |
| b64_file = NULL; |
| break; |
| } |
| ssl_buf = ptr; |
| ssl_max_len = ssl_required_len; |
| } |
| |
| printf( "\nDeserializing number %u:\n", ++b64_counter ); |
| |
| printf( "\nBase64 code:\n" ); |
| print_b64( b64_buf, b64_len ); |
| |
| ret = mbedtls_base64_decode( ssl_buf, ssl_max_len, &ssl_len, b64_buf, b64_len ); |
| if( ret != 0) |
| { |
| mbedtls_strerror( ret, (char*) b64_buf, b64_max_len ); |
| printf_err( "base64 code cannot be decoded - %s\n", b64_buf ); |
| continue; |
| } |
| |
| if( debug ) |
| { |
| printf( "\nDecoded data in hex:\n\t"); |
| print_hex( ssl_buf, ssl_len, 25, "\t" ); |
| } |
| |
| print_deserialized_ssl_context( ssl_buf, ssl_len ); |
| |
| } |
| else |
| { |
| fclose( b64_file ); |
| b64_file = NULL; |
| } |
| } |
| |
| free( b64_buf ); |
| free( ssl_buf ); |
| |
| if( b64_counter > 0 ) |
| { |
| printf_dbg( "Finished. Found %u base64 codes\n", b64_counter ); |
| } |
| else |
| { |
| printf( "Finished. No valid base64 code found\n" ); |
| } |
| |
| return 0; |
| } |
| |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |