diff --git a/docs/architecture/tls13-support.md b/docs/architecture/tls13-support.md
index f30590b..85482ba 100644
--- a/docs/architecture/tls13-support.md
+++ b/docs/architecture/tls13-support.md
@@ -478,3 +478,175 @@
 
 * state change: the state change is done in the main state handler to ease
 the navigation of the state machine transitions.
+
+
+Writing and reading early or 0-RTT data
+---------------------------------------
+
+An application function to write and send a buffer of data to a server through
+TLS may plausibly look like:
+
+```
+int write_data( mbedtls_ssl_context *ssl,
+                const unsigned char *data_to_write,
+                size_t data_to_write_len,
+                size_t *data_written )
+{
+    *data_written = 0;
+
+    while( *data_written < data_to_write_len )
+    {
+        ret = mbedtls_ssl_write( ssl, data_to_write + *data_written,
+                                 data_to_write_len - *data_written );
+
+        if( ret < 0 &&
+            ret != MBEDTLS_ERR_SSL_WANT_READ &&
+            ret != MBEDTLS_ERR_SSL_WANT_WRITE )
+        {
+            return( ret );
+        }
+
+        *data_written += ret;
+    }
+
+    return( 0 );
+}
+```
+where ssl is the SSL context to use, data_to_write the address of the data
+buffer and data_to_write_len the number of data bytes. The handshake may
+not be completed, not even started for the SSL context ssl when the function is
+called and in that case the mbedtls_ssl_write() API takes care transparently of
+completing the handshake before to write and send data to the server. The
+mbedtls_ssl_write() may not been able to write and send all data in one go thus
+the need for a loop calling it as long as there are still data to write and
+send.
+
+An application function to write and send early data and only early data,
+data sent during the first flight of client messages while the handshake is in
+its initial phase, would look completely similar but the call to
+mbedtls_ssl_write_early_data() instead of mbedtls_ssl_write().
+```
+int write_early_data( mbedtls_ssl_context *ssl,
+                      const unsigned char *data_to_write,
+                      size_t data_to_write_len,
+                      size_t *data_written )
+{
+    *data_written = 0;
+
+    while( *data_written < data_to_write_len )
+    {
+        ret = mbedtls_ssl_write_early_data( ssl, data_to_write + *data_written,
+                                            data_to_write_len - *data_written );
+
+        if( ret < 0 &&
+            ret != MBEDTLS_ERR_SSL_WANT_READ &&
+            ret != MBEDTLS_ERR_SSL_WANT_WRITE )
+        {
+            return( ret );
+        }
+
+        *data_written += ret;
+    }
+
+    return( 0 );
+}
+```
+Note that compared to write_data(), write_early_data() can also return
+MBEDTLS_ERR_SSL_CANNOT_WRITE_EARLY_DATA and that should be handled
+specifically by the user of write_early_data(). A fresh SSL context (typically
+just after a call to mbedtls_ssl_setup() or mbedtls_ssl_session_reset()) would
+be expected when calling `write_early_data`.
+
+All together, code to write and send a buffer of data as long as possible as
+early data and then as standard post-handshake application data could
+plausibly look like:
+
+```
+ret = write_early_data( ssl, data_to_write, data_to_write_len,
+                        &early_data_written );
+if( ret < 0 &&
+    ret != MBEDTLS_ERR_SSL_CANNOT_WRITE_EARLY_DATA )
+{
+    goto error;
+}
+
+ret = write_data( ssl, data_to_write + early_data_written,
+                  data_to_write_len - early_data_written, &data_written );
+if( ret < 0 )
+    goto error;
+
+data_written += early_data_written;
+```
+
+Finally, taking into account that the server may reject early data, application
+code to write and send a buffer of data could plausibly look like:
+```
+ret = write_early_data( ssl, data_to_write, data_to_write_len,
+                        &early_data_written );
+if( ret < 0 &&
+    ret != MBEDTLS_ERR_SSL_CANNOT_WRITE_EARLY_DATA )
+{
+    goto error;
+}
+
+/*
+ * Make sure the handshake is completed as it is a requisite to
+ * mbedtls_ssl_get_early_data_status().
+ */
+while( !mbedtls_ssl_is_handshake_over( ssl ) )
+{
+    ret = mbedtls_ssl_handshake( ssl );
+    if( ret < 0 &&
+        ret != MBEDTLS_ERR_SSL_WANT_READ &&
+        ret != MBEDTLS_ERR_SSL_WANT_WRITE )
+    {
+        goto error;
+    }
+}
+
+ret = mbedtls_ssl_get_early_data_status( ssl );
+if( ret < 0 )
+    goto error;
+
+if( ret == MBEDTLS_SSL_EARLY_DATA_STATUS_REJECTED )
+   early_data_written = 0;
+
+ret = write_data( ssl, data_to_write + early_data_written,
+                  data_to_write_len - early_data_written, &data_written );
+if( ret < 0 )
+    goto error;
+
+data_written += early_data_written;
+```
+
+Basically, the same holds for reading early data on the server side without the
+complication of possible rejection. An application function to read early data
+into a given buffer could plausibly look like:
+```
+int read_early_data( mbedtls_ssl_context *ssl,
+                     unsigned char *buffer,
+                     size_t buffer_size,
+                     size_t *data_len )
+{
+    *data_len = 0;
+
+    while( *data_len < buffer_size )
+    {
+        ret = mbedtls_ssl_read_early_data( ssl, buffer + *data_len,
+                                           buffer_size - *data_len );
+
+        if( ret < 0 &&
+            ret != MBEDTLS_ERR_SSL_WANT_READ &&
+            ret != MBEDTLS_ERR_SSL_WANT_WRITE )
+        {
+            return( ret );
+        }
+
+        *data_len += ret;
+    }
+
+    return( 0 );
+}
+```
+with again calls to read_early_data() expected to be done with a fresh SSL
+context.
diff --git a/docs/use-psa-crypto.md b/docs/use-psa-crypto.md
index b22d37f..11442ed 100644
--- a/docs/use-psa-crypto.md
+++ b/docs/use-psa-crypto.md
@@ -86,7 +86,6 @@
 
 Current exceptions:
 
-- EC J-PAKE (when `MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED` is defined)
 - finite-field (non-EC) Diffie-Hellman (used in key exchanges: DHE-RSA,
   DHE-PSK)
 
diff --git a/include/mbedtls/ecjpake.h b/include/mbedtls/ecjpake.h
index e7ca1b2..3dd3361 100644
--- a/include/mbedtls/ecjpake.h
+++ b/include/mbedtls/ecjpake.h
@@ -113,7 +113,7 @@
  * \param curve     The identifier of the elliptic curve to use,
  *                  for example #MBEDTLS_ECP_DP_SECP256R1.
  * \param secret    The pre-shared secret (passphrase). This must be
- *                  a readable buffer of length \p len Bytes. It need
+ *                  a readable not empty buffer of length \p len Bytes. It need
  *                  only be valid for the duration of this call.
  * \param len       The length of the pre-shared secret \p secret.
  *
diff --git a/include/mbedtls/mbedtls_config.h b/include/mbedtls/mbedtls_config.h
index 3137395..bd3872f 100644
--- a/include/mbedtls/mbedtls_config.h
+++ b/include/mbedtls/mbedtls_config.h
@@ -1648,7 +1648,7 @@
 * production.
 *
 */
-#define MBEDTLS_SSL_EARLY_DATA
+//#define MBEDTLS_SSL_EARLY_DATA
 
 /**
  * \def MBEDTLS_SSL_PROTO_DTLS
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index d055851..ea58661 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -96,12 +96,16 @@
 /* Error space gap */
 /** Processing of the Certificate handshake message failed. */
 #define MBEDTLS_ERR_SSL_BAD_CERTIFICATE                   -0x7A00
-/** Received NewSessionTicket Post Handshake Message */
+/* Error space gap */
+/**
+ * Received NewSessionTicket Post Handshake Message.
+ * This error code is experimental and may be changed or removed without notice.
+ */
 #define MBEDTLS_ERR_SSL_RECEIVED_NEW_SESSION_TICKET       -0x7B00
-/* Error space gap */
-/* Error space gap */
-/* Error space gap */
-/* Error space gap */
+/** Not possible to read early data */
+#define MBEDTLS_ERR_SSL_CANNOT_READ_EARLY_DATA            -0x7B80
+/** Not possible to write early data */
+#define MBEDTLS_ERR_SSL_CANNOT_WRITE_EARLY_DATA           -0x7C00
 /* Error space gap */
 /* Error space gap */
 /* Error space gap */
@@ -661,7 +665,7 @@
     MBEDTLS_SSL_SERVER_FINISHED,
     MBEDTLS_SSL_FLUSH_BUFFERS,
     MBEDTLS_SSL_HANDSHAKE_WRAPUP,
-    MBEDTLS_SSL_HANDSHAKE_OVER,
+
     MBEDTLS_SSL_NEW_SESSION_TICKET,
     MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT,
     MBEDTLS_SSL_HELLO_RETRY_REQUEST,
@@ -671,7 +675,9 @@
     MBEDTLS_SSL_CLIENT_CCS_BEFORE_2ND_CLIENT_HELLO,
     MBEDTLS_SSL_SERVER_CCS_AFTER_SERVER_HELLO,
     MBEDTLS_SSL_SERVER_CCS_AFTER_HELLO_RETRY_REQUEST,
-    MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH,
+    MBEDTLS_SSL_HANDSHAKE_OVER,
+    MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET,
+    MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH,
 }
 mbedtls_ssl_states;
 
@@ -801,14 +807,6 @@
 typedef struct mbedtls_ssl_flight_item mbedtls_ssl_flight_item;
 #endif
 
-#if defined(MBEDTLS_SSL_EARLY_DATA) && defined(MBEDTLS_SSL_CLI_C)
-#define MBEDTLS_SSL_EARLY_DATA_STATUS_UNKNOWN           0
-#define MBEDTLS_SSL_EARLY_DATA_STATUS_NOT_SENT          1
-#define MBEDTLS_SSL_EARLY_DATA_STATUS_INDICATION_SENT   2
-#define MBEDTLS_SSL_EARLY_DATA_STATUS_REJECTED          3
-#define MBEDTLS_SSL_EARLY_DATA_STATUS_ACCEPTED          4
-#endif
-
 #if defined(MBEDTLS_SSL_PROTO_TLS1_3) && defined(MBEDTLS_SSL_SESSION_TICKETS)
 typedef uint8_t mbedtls_ssl_tls13_ticket_flags;
 
@@ -3851,9 +3849,10 @@
  * \note           The SSL context needs to be already set up. The right place
  *                 to call this function is between \c mbedtls_ssl_setup() or
  *                 \c mbedtls_ssl_reset() and \c mbedtls_ssl_handshake().
+ *                 Password cannot be empty (see RFC 8236).
  *
  * \param ssl      SSL context
- * \param pw       EC J-PAKE password (pre-shared secret)
+ * \param pw       EC J-PAKE password (pre-shared secret). It cannot be empty
  * \param pw_len   length of pw in bytes
  *
  * \return         0 on success, or a negative error code.
@@ -4651,7 +4650,7 @@
  */
 static inline int mbedtls_ssl_is_handshake_over( mbedtls_ssl_context *ssl )
 {
-    return( ssl->MBEDTLS_PRIVATE( state ) == MBEDTLS_SSL_HANDSHAKE_OVER );
+    return( ssl->MBEDTLS_PRIVATE( state ) >= MBEDTLS_SSL_HANDSHAKE_OVER );
 }
 
 /**
@@ -4891,6 +4890,151 @@
  */
 int mbedtls_ssl_close_notify( mbedtls_ssl_context *ssl );
 
+#if defined(MBEDTLS_SSL_EARLY_DATA)
+
+#if defined(MBEDTLS_SSL_SRV_C)
+/**
+ * \brief          Read at most 'len' application data bytes while performing
+ *                 the handshake (early data).
+ *
+ * \note           This function behaves mainly as mbedtls_ssl_read(). The
+ *                 specification of mbedtls_ssl_read() relevant to TLS 1.3
+ *                 (thus not the parts specific to (D)TLS 1.2) applies to this
+ *                 function and the present documentation is restricted to the
+ *                 differences with mbedtls_ssl_read().
+ *
+ * \param ssl      SSL context
+ * \param buf      buffer that will hold the data
+ * \param len      maximum number of bytes to read
+ *
+ * \return         One additional specific return value:
+ *                 #MBEDTLS_ERR_SSL_CANNOT_READ_EARLY_DATA.
+ *
+ *                 #MBEDTLS_ERR_SSL_CANNOT_READ_EARLY_DATA is returned when it
+ *                 is not possible to read early data for the SSL context
+ *                 \p ssl.
+ *
+ *                 It may have been possible and it is not possible
+ *                 anymore because the server received the End of Early Data
+ *                 message or the maximum number of allowed early data for the
+ *                 PSK in use has been reached.
+ *
+ *                 It may never have been possible and will never be possible
+ *                 for the SSL context \p ssl because the use of early data
+ *                 is disabled for that context or more generally the context
+ *                 is not suitably configured to enable early data or the
+ *                 client does not use early data or the first call to the
+ *                 function was done while the handshake was already too
+ *                 advanced to gather and accept early data.
+ *
+ *                 It is not possible to read early data for the SSL context
+ *                 \p ssl but this does not preclude for using it with
+ *                 mbedtls_ssl_write(), mbedtls_ssl_read() or
+ *                 mbedtls_ssl_handshake().
+ *
+ * \note           When a server wants to retrieve early data, it is expected
+ *                 that this function starts the handshake for the SSL context
+ *                 \p ssl. But this is not mandatory.
+ *
+ */
+int mbedtls_ssl_read_early_data( mbedtls_ssl_context *ssl,
+                                 unsigned char *buf, size_t len );
+#endif /* MBEDTLS_SSL_SRV_C */
+
+#if defined(MBEDTLS_SSL_CLI_C)
+/**
+ * \brief          Try to write exactly 'len' application data bytes while
+ *                 performing the handshake (early data).
+ *
+ * \note           This function behaves mainly as mbedtls_ssl_write(). The
+ *                 specification of mbedtls_ssl_write() relevant to TLS 1.3
+ *                 (thus not the parts specific to (D)TLS1.2) applies to this
+ *                 function and the present documentation is restricted to the
+ *                 differences with mbedtls_ssl_write().
+ *
+ * \param ssl      SSL context
+ * \param buf      buffer holding the data
+ * \param len      how many bytes must be written
+ *
+ * \return         One additional specific return value:
+ *                 #MBEDTLS_ERR_SSL_CANNOT_WRITE_EARLY_DATA.
+ *
+ *                 #MBEDTLS_ERR_SSL_CANNOT_WRITE_EARLY_DATA is returned when it
+ *                 is not possible to write early data for the SSL context
+ *                 \p ssl.
+ *
+ *                 It may have been possible and it is not possible
+ *                 anymore because the client received the server Finished
+ *                 message, the server rejected early data or the maximum
+ *                 number of allowed early data for the PSK in use has been
+ *                 reached.
+ *
+ *                 It may never have been possible and will never be possible
+ *                 for the SSL context \p ssl because the use of early data
+ *                 is disabled for that context or more generally the context
+ *                 is not suitably configured to enable early data or the first
+ *                 call to the function was done while the handshake was
+ *                 already completed.
+ *
+ *                 It is not possible to write early data for the SSL context
+ *                 \p ssl but this does not preclude for using it with
+ *                 mbedtls_ssl_write(), mbedtls_ssl_read() or
+ *                 mbedtls_ssl_handshake().
+ *
+ * \note           This function may write early data only if the SSL context
+ *                 has been configured for the handshake with a PSK for which
+ *                 early data is allowed.
+ *
+ * \note           To maximize the number of early data that can be written in
+ *                 the course of the handshake, it is expected that this
+ *                 function starts the handshake for the SSL context \p ssl.
+ *                 But this is not mandatory.
+ *
+ * \note           This function does not provide any information on whether
+ *                 the server has accepted or will accept early data or not.
+ *                 When it returns a positive value, it just means that it
+ *                 has written early data to the server. To know whether the
+ *                 server has accepted early data or not, you should call
+ *                 mbedtls_ssl_get_early_data_status() with the handshake
+ *                 completed.
+ */
+int mbedtls_ssl_write_early_data( mbedtls_ssl_context *ssl,
+                                  const unsigned char *buf, size_t len );
+
+#define MBEDTLS_SSL_EARLY_DATA_STATUS_NOT_SENT  0
+#define MBEDTLS_SSL_EARLY_DATA_STATUS_ACCEPTED  1
+#define MBEDTLS_SSL_EARLY_DATA_STATUS_REJECTED  2
+/**
+ * \brief Get the status of the negotiation of the use of early data.
+ *
+ * \param ssl      The SSL context to query
+ *
+ * \return         #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if this function is called
+ *                 from the server-side.
+ *
+ * \return         #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if this function is called
+ *                 prior to completion of the handshake.
+ *
+ * \return         #MBEDTLS_SSL_EARLY_DATA_STATUS_NOT_SENT if the client has
+ *                 not indicated the use of early data to the server.
+ *
+ * \return         #MBEDTLS_SSL_EARLY_DATA_STATUS_ACCEPTED if the client has
+ *                 indicated the use of early data and the server has accepted
+ *                 it.
+ *
+ * \return         #MBEDTLS_SSL_EARLY_DATA_STATUS_REJECTED if the client has
+ *                 indicated the use of early data but the server has rejected
+ *                 it. In this situation, the client may want to re-send the
+ *                 early data it may have tried to send by calling
+ *                 mbedtls_ssl_write_early_data() as ordinary post-handshake
+ *                 application data by calling mbedtls_ssl_write().
+ *
+ */
+int mbedtls_ssl_get_early_data_status( mbedtls_ssl_context *ssl );
+#endif /* MBEDTLS_SSL_CLI_C */
+
+#endif /* MBEDTLS_SSL_EARLY_DATA */
+
 /**
  * \brief          Free referenced items in an SSL context and clear memory
  *
diff --git a/library/bignum.c b/library/bignum.c
index ba03988..a68957a 100644
--- a/library/bignum.c
+++ b/library/bignum.c
@@ -968,17 +968,15 @@
     carry = mbedtls_mpi_core_sub( X->p, A->p, B->p, n );
     if( carry != 0 )
     {
-        /* Propagate the carry to the first nonzero limb of X. */
-        for( ; n < X->n && X->p[n] == 0; n++ )
-            --X->p[n];
-        /* If we ran out of space for the carry, it means that the result
-         * is negative. */
-        if( n == X->n )
+        /* Propagate the carry through the rest of X. */
+        carry = mbedtls_mpi_core_sub_int( X->p + n, X->p + n, carry, X->n - n );
+
+        /* If we have further carry/borrow, the result is negative. */
+        if( carry != 0 )
         {
             ret = MBEDTLS_ERR_MPI_NEGATIVE_VALUE;
             goto cleanup;
         }
-        --X->p[n];
     }
 
     /* X should always be positive as a result of unsigned subtractions. */
diff --git a/library/bignum_core.c b/library/bignum_core.c
index 34aecda..41d3239 100644
--- a/library/bignum_core.c
+++ b/library/bignum_core.c
@@ -590,6 +590,22 @@
 
 /* BEGIN MERGE SLOT 3 */
 
+mbedtls_mpi_uint mbedtls_mpi_core_sub_int( mbedtls_mpi_uint *X,
+                                           const mbedtls_mpi_uint *A,
+                                           mbedtls_mpi_uint c, /* doubles as carry */
+                                           size_t limbs )
+{
+    for( size_t i = 0; i < limbs; i++ )
+    {
+        mbedtls_mpi_uint s = A[i];
+        mbedtls_mpi_uint t = s - c;
+        c = ( t > s );
+        X[i] = t;
+    }
+
+    return( c );
+}
+
 /* END MERGE SLOT 3 */
 
 /* BEGIN MERGE SLOT 4 */
diff --git a/library/bignum_core.h b/library/bignum_core.h
index ad04e08..d48e705 100644
--- a/library/bignum_core.h
+++ b/library/bignum_core.h
@@ -504,6 +504,23 @@
 
 /* BEGIN MERGE SLOT 3 */
 
+/**
+ * \brief Subtract unsigned integer from known-size large unsigned integers.
+ *        Return the borrow.
+ *
+ * \param[out] X    The result of the subtraction.
+ * \param[in] A     The left operand.
+ * \param b         The unsigned scalar to subtract.
+ * \param limbs     Number of limbs of \p X and \p A.
+ *
+ * \return          1 if `A < b`.
+ *                  0 if `A >= b`.
+ */
+mbedtls_mpi_uint mbedtls_mpi_core_sub_int( mbedtls_mpi_uint *X,
+                                           const mbedtls_mpi_uint *A,
+                                           mbedtls_mpi_uint b,
+                                           size_t limbs );
+
 /* END MERGE SLOT 3 */
 
 /* BEGIN MERGE SLOT 4 */
diff --git a/library/ssl_misc.h b/library/ssl_misc.h
index 4d7f635..9998e5b 100644
--- a/library/ssl_misc.h
+++ b/library/ssl_misc.h
@@ -50,7 +50,8 @@
 #include "mbedtls/sha512.h"
 #endif
 
-#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && \
+    !defined(MBEDTLS_USE_PSA_CRYPTO)
 #include "mbedtls/ecjpake.h"
 #endif
 
@@ -776,7 +777,13 @@
 #endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
 
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    psa_pake_operation_t psa_pake_ctx;        /*!< EC J-PAKE key exchange */
+    mbedtls_svc_key_id_t psa_pake_password;
+    uint8_t psa_pake_ctx_is_ok;
+#else
     mbedtls_ecjpake_context ecjpake_ctx;        /*!< EC J-PAKE key exchange */
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #if defined(MBEDTLS_SSL_CLI_C)
     unsigned char *ecjpake_cache;               /*!< Cache for ClientHello ext */
     size_t ecjpake_cache_len;                   /*!< Length of cached data */
@@ -2493,6 +2500,52 @@
 }
 #endif /* MBEDTLS_USE_PSA_CRYPTO || MBEDTLS_SSL_PROTO_TLS1_3 */
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && \
+    defined(MBEDTLS_USE_PSA_CRYPTO)
+
+typedef enum {
+    MBEDTLS_ECJPAKE_ROUND_ONE,
+    MBEDTLS_ECJPAKE_ROUND_TWO
+} mbedtls_ecjpake_rounds_t;
+
+/**
+ * \brief       Parse the provided input buffer for getting the first round
+ *              of key exchange. This code is common between server and client
+ *
+ * \param  pake_ctx [in] the PAKE's operation/context structure
+ * \param  buf      [in] input buffer to parse
+ * \param  len      [in] length of the input buffer
+ * \param  round    [in] either MBEDTLS_ECJPAKE_ROUND_ONE or
+ *                       MBEDTLS_ECJPAKE_ROUND_TWO
+ *
+ * \return               0 on success or a negative error code in case of failure
+ */
+int mbedtls_psa_ecjpake_read_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    const unsigned char *buf,
+                                    size_t len, mbedtls_ecjpake_rounds_t round );
+
+/**
+ * \brief       Write the first round of key exchange into the provided output
+ *              buffer. This code is common between server and client
+ *
+ * \param  pake_ctx [in] the PAKE's operation/context structure
+ * \param  buf      [out] the output buffer in which data will be written to
+ * \param  len      [in] length of the output buffer
+ * \param  olen     [out] the length of the data really written on the buffer
+ * \param  round    [in] either MBEDTLS_ECJPAKE_ROUND_ONE or
+ *                       MBEDTLS_ECJPAKE_ROUND_TWO
+ *
+ * \return               0 on success or a negative error code in case of failure
+ */
+int mbedtls_psa_ecjpake_write_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    unsigned char *buf,
+                                    size_t len, size_t *olen,
+                                    mbedtls_ecjpake_rounds_t round );
+
+#endif //MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED && MBEDTLS_USE_PSA_CRYPTO
+
 /**
  * \brief       TLS record protection modes
  */
diff --git a/library/ssl_msg.c b/library/ssl_msg.c
index dbc6391..80471d4 100644
--- a/library/ssl_msg.c
+++ b/library/ssl_msg.c
@@ -1907,7 +1907,7 @@
             MBEDTLS_SSL_DEBUG_MSG( 2, ( "timeout" ) );
             mbedtls_ssl_set_timer( ssl, 0 );
 
-            if( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
+            if( ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER )
             {
                 if( ssl_double_retransmit_timeout( ssl ) != 0 )
                 {
@@ -5299,7 +5299,7 @@
 
     MBEDTLS_SSL_DEBUG_MSG( 3, ( "NewSessionTicket received" ) );
     mbedtls_ssl_handshake_set_state( ssl,
-                                     MBEDTLS_SSL_NEW_SESSION_TICKET );
+                                     MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET );
 
     return( MBEDTLS_ERR_SSL_WANT_READ );
 }
@@ -5502,7 +5502,7 @@
     }
 #endif
 
-    if( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
+    if( ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER )
     {
         ret = mbedtls_ssl_handshake( ssl );
         if( ret != MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO &&
@@ -5758,7 +5758,7 @@
     }
 #endif
 
-    if( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
+    if( ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER )
     {
         if( ( ret = mbedtls_ssl_handshake( ssl ) ) != 0 )
         {
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index da90b23..3d3491b 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -907,7 +907,12 @@
     mbedtls_ecdh_init( &handshake->ecdh_ctx );
 #endif
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    handshake->psa_pake_ctx = psa_pake_operation_init();
+    handshake->psa_pake_password = MBEDTLS_SVC_KEY_ID_INIT;
+#else
     mbedtls_ecjpake_init( &handshake->ecjpake_ctx );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #if defined(MBEDTLS_SSL_CLI_C)
     handshake->ecjpake_cache = NULL;
     handshake->ecjpake_cache_len = 0;
@@ -1850,6 +1855,73 @@
 /*
  * Set EC J-PAKE password for current handshake
  */
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
+                                         const unsigned char *pw,
+                                         size_t pw_len )
+{
+    psa_pake_cipher_suite_t cipher_suite = psa_pake_cipher_suite_init();
+    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
+    psa_pake_role_t psa_role;
+    psa_status_t status;
+
+    if( ssl->handshake == NULL || ssl->conf == NULL )
+        return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
+
+    if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
+        psa_role = PSA_PAKE_ROLE_SERVER;
+    else
+        psa_role = PSA_PAKE_ROLE_CLIENT;
+
+    /* Empty password is not valid  */
+    if( ( pw == NULL) || ( pw_len == 0 ) )
+        return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
+
+    psa_set_key_usage_flags( &attributes, PSA_KEY_USAGE_DERIVE );
+    psa_set_key_algorithm( &attributes, PSA_ALG_JPAKE );
+    psa_set_key_type( &attributes, PSA_KEY_TYPE_PASSWORD );
+
+    status = psa_import_key( &attributes, pw, pw_len,
+                                &ssl->handshake->psa_pake_password );
+    if( status != PSA_SUCCESS )
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+
+    psa_pake_cs_set_algorithm( &cipher_suite, PSA_ALG_JPAKE );
+    psa_pake_cs_set_primitive( &cipher_suite,
+                               PSA_PAKE_PRIMITIVE( PSA_PAKE_PRIMITIVE_TYPE_ECC,
+                                                   PSA_ECC_FAMILY_SECP_R1,
+                                                   256) );
+    psa_pake_cs_set_hash( &cipher_suite, PSA_ALG_SHA_256 );
+
+    status = psa_pake_setup( &ssl->handshake->psa_pake_ctx, &cipher_suite );
+    if( status != PSA_SUCCESS )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+    }
+
+    status = psa_pake_set_role( &ssl->handshake->psa_pake_ctx, psa_role );
+    if( status != PSA_SUCCESS )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+    }
+
+    psa_pake_set_password_key( &ssl->handshake->psa_pake_ctx,
+                                ssl->handshake->psa_pake_password );
+    if( status != PSA_SUCCESS )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+    }
+
+    ssl->handshake->psa_pake_ctx_is_ok = 1;
+
+    return( 0 );
+}
+#else /* MBEDTLS_USE_PSA_CRYPTO */
 int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
                                          const unsigned char *pw,
                                          size_t pw_len )
@@ -1870,6 +1942,7 @@
                                    MBEDTLS_ECP_DP_SECP256R1,
                                    pw, pw_len ) );
 }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_HANDSHAKE_WITH_PSK_ENABLED)
@@ -3602,7 +3675,7 @@
     if( ssl            == NULL                       ||
         ssl->conf      == NULL                       ||
         ssl->handshake == NULL                       ||
-        mbedtls_ssl_is_handshake_over( ssl ) == 1 )
+        ssl->state == MBEDTLS_SSL_HANDSHAKE_OVER  )
     {
         return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
     }
@@ -3706,7 +3779,7 @@
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> handshake" ) );
 
     /* Main handshake loop */
-    while( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
+    while( ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER )
     {
         ret = mbedtls_ssl_handshake_step( ssl );
 
@@ -3908,8 +3981,15 @@
 #if !defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_ECDH_C)
     mbedtls_ecdh_free( &handshake->ecdh_ctx );
 #endif
+
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    psa_pake_abort( &handshake->psa_pake_ctx );
+    psa_destroy_key( handshake->psa_pake_password );
+    handshake->psa_pake_password = MBEDTLS_SVC_KEY_ID_INIT;
+#else
     mbedtls_ecjpake_free( &handshake->ecjpake_ctx );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #if defined(MBEDTLS_SSL_CLI_C)
     mbedtls_free( handshake->ecjpake_cache );
     handshake->ecjpake_cache = NULL;
@@ -6123,6 +6203,55 @@
     else
 #endif
     {
+#if defined(MBEDTLS_USE_PSA_CRYPTO) &&                              \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+        if( handshake->ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+        {
+            psa_status_t status;
+            psa_algorithm_t alg = PSA_ALG_TLS12_ECJPAKE_TO_PMS;
+            psa_key_derivation_operation_t derivation =
+                PSA_KEY_DERIVATION_OPERATION_INIT;
+
+            MBEDTLS_SSL_DEBUG_MSG( 2, ( "perform PSA-based PMS KDF for ECJPAKE" ) );
+
+            handshake->pmslen = PSA_TLS12_ECJPAKE_TO_PMS_DATA_SIZE;
+
+            status = psa_key_derivation_setup( &derivation, alg );
+            if( status != PSA_SUCCESS )
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+
+            status = psa_key_derivation_set_capacity( &derivation,
+                                            PSA_TLS12_ECJPAKE_TO_PMS_DATA_SIZE );
+            if( status != PSA_SUCCESS )
+            {
+                psa_key_derivation_abort( &derivation );
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+
+            status = psa_pake_get_implicit_key( &handshake->psa_pake_ctx,
+                                                &derivation );
+            if( status != PSA_SUCCESS )
+            {
+                psa_key_derivation_abort( &derivation );
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+
+            status = psa_key_derivation_output_bytes( &derivation,
+                                                      handshake->premaster,
+                                                      handshake->pmslen );
+            if( status != PSA_SUCCESS )
+            {
+                psa_key_derivation_abort( &derivation );
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+
+            status = psa_key_derivation_abort( &derivation );
+            if( status != PSA_SUCCESS )
+            {
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+        }
+#endif
         ret = handshake->tls_prf( handshake->premaster, handshake->pmslen,
                                   lbl, seed, seed_len,
                                   master,
@@ -7544,7 +7673,7 @@
 #endif
         mbedtls_ssl_handshake_wrapup_free_hs_transform( ssl );
 
-    ssl->state++;
+    ssl->state = MBEDTLS_SSL_HANDSHAKE_OVER;
 
     MBEDTLS_SSL_DEBUG_MSG( 3, ( "<= handshake wrapup" ) );
 }
@@ -8306,6 +8435,99 @@
     return( ret );
 }
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && \
+    defined(MBEDTLS_USE_PSA_CRYPTO)
+int mbedtls_psa_ecjpake_read_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    const unsigned char *buf,
+                                    size_t len, mbedtls_ecjpake_rounds_t round )
+{
+    psa_status_t status;
+    size_t input_offset = 0;
+    /*
+     * At round one repeat the KEY_SHARE, ZK_PUBLIC & ZF_PROOF twice
+     * At round two perform a single cycle
+     */
+    unsigned int remaining_steps = ( round == MBEDTLS_ECJPAKE_ROUND_ONE) ? 2 : 1;
+
+    for( ; remaining_steps > 0; remaining_steps-- )
+    {
+        for( psa_pake_step_t step = PSA_PAKE_STEP_KEY_SHARE;
+             step <= PSA_PAKE_STEP_ZK_PROOF;
+             ++step )
+        {
+            /* Length is stored at the first byte */
+            size_t length = buf[input_offset];
+            input_offset += 1;
+
+            if( input_offset + length > len )
+            {
+                return MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE;
+            }
+
+            status = psa_pake_input( pake_ctx, step,
+                                     buf + input_offset, length );
+            if( status != PSA_SUCCESS)
+            {
+                return psa_ssl_status_to_mbedtls( status );
+            }
+
+            input_offset += length;
+        }
+    }
+
+    if( input_offset != len )
+        return MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE;
+
+    return( 0 );
+}
+
+int mbedtls_psa_ecjpake_write_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    unsigned char *buf,
+                                    size_t len, size_t *olen,
+                                    mbedtls_ecjpake_rounds_t round )
+{
+    psa_status_t status;
+    size_t output_offset = 0;
+    size_t output_len;
+    /*
+     * At round one repeat the KEY_SHARE, ZK_PUBLIC & ZF_PROOF twice
+     * At round two perform a single cycle
+     */
+    unsigned int remaining_steps = ( round == MBEDTLS_ECJPAKE_ROUND_ONE) ? 2 : 1;
+
+    for( ; remaining_steps > 0; remaining_steps-- )
+    {
+        for( psa_pake_step_t step = PSA_PAKE_STEP_KEY_SHARE;
+            step <= PSA_PAKE_STEP_ZK_PROOF;
+            ++step )
+        {
+            /*
+             * For each step, prepend 1 byte with the length of the data as
+             * given by psa_pake_output().
+             */
+            status = psa_pake_output( pake_ctx, step,
+                                        buf + output_offset + 1,
+                                        len - output_offset - 1,
+                                        &output_len );
+            if( status != PSA_SUCCESS )
+            {
+                return( psa_ssl_status_to_mbedtls( status ) );
+            }
+
+            *(buf + output_offset) = (uint8_t) output_len;
+
+            output_offset += output_len + 1;
+        }
+    }
+
+    *olen = output_offset;
+
+    return( 0 );
+}
+#endif //MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED && MBEDTLS_USE_PSA_CRYPTO
+
 #if defined(MBEDTLS_USE_PSA_CRYPTO)
 int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
                                             unsigned char *hash, size_t *hashlen,
@@ -8864,8 +9086,13 @@
 
 #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && defined(MBEDTLS_SSL_CLI_C)
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( suite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE &&
+        ssl->handshake->psa_pake_ctx_is_ok != 1 )
+#else
     if( suite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE &&
         mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     {
         return( -1 );
     }
diff --git a/library/ssl_tls12_client.c b/library/ssl_tls12_client.c
index 21b3ba6..79c884b 100644
--- a/library/ssl_tls12_client.c
+++ b/library/ssl_tls12_client.c
@@ -132,13 +132,18 @@
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
     unsigned char *p = buf;
-    size_t kkpp_len;
+    size_t kkpp_len = 0;
 
     *olen = 0;
 
     /* Skip costly extension if we can't use EC J-PAKE anyway */
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ssl->handshake->psa_pake_ctx_is_ok != 1 )
+        return( 0 );
+#else
     if( mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
         return( 0 );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
     MBEDTLS_SSL_DEBUG_MSG( 3,
         ( "client hello, adding ecjpake_kkpp extension" ) );
@@ -158,6 +163,18 @@
     {
         MBEDTLS_SSL_DEBUG_MSG( 3, ( "generating new ecjpake parameters" ) );
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        ret = mbedtls_psa_ecjpake_write_round(&ssl->handshake->psa_pake_ctx,
+                                                p + 2, end - p - 2, &kkpp_len,
+                                                MBEDTLS_ECJPAKE_ROUND_ONE );
+        if ( ret != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+            MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+            return( ret );
+        }
+#else
         ret = mbedtls_ecjpake_write_round_one( &ssl->handshake->ecjpake_ctx,
                                                p + 2, end - p - 2, &kkpp_len,
                                                ssl->conf->f_rng, ssl->conf->p_rng );
@@ -167,6 +184,7 @@
                 "mbedtls_ecjpake_write_round_one", ret );
             return( ret );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
         ssl->handshake->ecjpake_cache = mbedtls_calloc( 1, kkpp_len );
         if( ssl->handshake->ecjpake_cache == NULL )
@@ -849,10 +867,11 @@
             ssl->handshake->ecdh_ctx.point_format = p[0];
 #endif /* !MBEDTLS_USE_PSA_CRYPTO &&
           ( MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ) */
-#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if !defined(MBEDTLS_USE_PSA_CRYPTO) &&                             \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
             mbedtls_ecjpake_set_point_format( &ssl->handshake->ecjpake_ctx,
                                               p[0] );
-#endif
+#endif /* !MBEDTLS_USE_PSA_CRYPTO && MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
             MBEDTLS_SSL_DEBUG_MSG( 4, ( "point format selected: %d", p[0] ) );
             return( 0 );
         }
@@ -889,6 +908,24 @@
     ssl->handshake->ecjpake_cache = NULL;
     ssl->handshake->ecjpake_cache_len = 0;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ( ret = mbedtls_psa_ecjpake_read_round(
+                            &ssl->handshake->psa_pake_ctx, buf, len,
+                            MBEDTLS_ECJPAKE_ROUND_ONE ) ) != 0 )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+        MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round one", ret );
+        mbedtls_ssl_send_alert_message(
+                ssl,
+                MBEDTLS_SSL_ALERT_LEVEL_FATAL,
+                MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
+        return( ret );
+    }
+
+    return( 0 );
+#else
     if( ( ret = mbedtls_ecjpake_read_round_one( &ssl->handshake->ecjpake_ctx,
                                                 buf, len ) ) != 0 )
     {
@@ -901,6 +938,7 @@
     }
 
     return( 0 );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 }
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
@@ -2296,6 +2334,47 @@
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        /*
+         * The first 3 bytes are:
+         * [0] MBEDTLS_ECP_TLS_NAMED_CURVE
+         * [1, 2] elliptic curve's TLS ID
+         *
+         * However since we only support secp256r1 for now, we check only
+         * that TLS ID here
+         */
+        uint16_t read_tls_id = MBEDTLS_GET_UINT16_BE( p, 1 );
+        const mbedtls_ecp_curve_info *curve_info;
+
+        if( ( curve_info = mbedtls_ecp_curve_info_from_grp_id(
+                                MBEDTLS_ECP_DP_SECP256R1 ) ) == NULL )
+        {
+            return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+        }
+
+        if( ( *p != MBEDTLS_ECP_TLS_NAMED_CURVE ) ||
+            ( read_tls_id != curve_info->tls_id ) )
+        {
+            return( MBEDTLS_ERR_SSL_ILLEGAL_PARAMETER );
+        }
+
+        p += 3;
+
+        if( ( ret = mbedtls_psa_ecjpake_read_round(
+                        &ssl->handshake->psa_pake_ctx, p, end - p,
+                        MBEDTLS_ECJPAKE_ROUND_TWO ) ) != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+            MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round two", ret );
+            mbedtls_ssl_send_alert_message(
+                ssl,
+                MBEDTLS_SSL_ALERT_LEVEL_FATAL,
+                MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
+            return( MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE );
+        }
+#else
         ret = mbedtls_ecjpake_read_round_two( &ssl->handshake->ecjpake_ctx,
                                               p, end - p );
         if( ret != 0 )
@@ -2307,6 +2386,7 @@
                 MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
             return( MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
@@ -3227,6 +3307,21 @@
     {
         header_len = 4;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        unsigned char *out_p = ssl->out_msg + header_len;
+        unsigned char *end_p = ssl->out_msg + MBEDTLS_SSL_OUT_CONTENT_LEN -
+                               header_len;
+        ret = mbedtls_psa_ecjpake_write_round( &ssl->handshake->psa_pake_ctx,
+                                    out_p, end_p - out_p, &content_len,
+                                    MBEDTLS_ECJPAKE_ROUND_TWO );
+        if ( ret != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+            MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+            return( ret );
+        }
+#else
         ret = mbedtls_ecjpake_write_round_two( &ssl->handshake->ecjpake_ctx,
                 ssl->out_msg + header_len,
                 MBEDTLS_SSL_OUT_CONTENT_LEN - header_len,
@@ -3246,6 +3341,7 @@
             MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_derive_secret", ret );
             return( ret );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_RSA_ENABLED */
diff --git a/library/ssl_tls12_server.c b/library/ssl_tls12_server.c
index 3dab246..8aa89c6 100644
--- a/library/ssl_tls12_server.c
+++ b/library/ssl_tls12_server.c
@@ -268,10 +268,11 @@
             ssl->handshake->ecdh_ctx.point_format = p[0];
 #endif /* !MBEDTLS_USE_PSA_CRYPTO &&
           ( MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ) */
-#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if !defined(MBEDTLS_USE_PSA_CRYPTO) &&                             \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
             mbedtls_ecjpake_set_point_format( &ssl->handshake->ecjpake_ctx,
                                               p[0] );
-#endif
+#endif /* !MBEDTLS_USE_PSA_CRYPTO && MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
             MBEDTLS_SSL_DEBUG_MSG( 4, ( "point format selected: %d", p[0] ) );
             return( 0 );
         }
@@ -289,16 +290,37 @@
 MBEDTLS_CHECK_RETURN_CRITICAL
 static int ssl_parse_ecjpake_kkpp( mbedtls_ssl_context *ssl,
                                    const unsigned char *buf,
-                                   size_t len )
+                                   size_t len)
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ssl->handshake->psa_pake_ctx_is_ok != 1 )
+#else
     if( mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     {
         MBEDTLS_SSL_DEBUG_MSG( 3, ( "skip ecjpake kkpp extension" ) );
         return( 0 );
     }
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ( ret = mbedtls_psa_ecjpake_read_round(
+                        &ssl->handshake->psa_pake_ctx, buf, len,
+                        MBEDTLS_ECJPAKE_ROUND_ONE ) ) != 0 )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+        MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round one", ret );
+        mbedtls_ssl_send_alert_message(
+                ssl,
+                MBEDTLS_SSL_ALERT_LEVEL_FATAL,
+                MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
+
+        return( ret );
+    }
+#else
     if( ( ret = mbedtls_ecjpake_read_round_one( &ssl->handshake->ecjpake_ctx,
                                                 buf, len ) ) != 0 )
     {
@@ -307,6 +329,7 @@
                                         MBEDTLS_SSL_ALERT_MSG_ILLEGAL_PARAMETER );
         return( ret );
     }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
     /* Only mark the extension as OK when we're sure it is */
     ssl->handshake->cli_exts |= MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK;
@@ -1996,6 +2019,18 @@
     MBEDTLS_PUT_UINT16_BE( MBEDTLS_TLS_EXT_ECJPAKE_KKPP, p, 0 );
     p += 2;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    ret = mbedtls_psa_ecjpake_write_round( &ssl->handshake->psa_pake_ctx,
+                                p + 2, end - p - 2, &kkpp_len,
+                                MBEDTLS_ECJPAKE_ROUND_ONE );
+    if ( ret != 0 )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+        MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+        return;
+    }
+#else
     ret = mbedtls_ecjpake_write_round_one( &ssl->handshake->ecjpake_ctx,
                                         p + 2, end - p - 2, &kkpp_len,
                                         ssl->conf->f_rng, ssl->conf->p_rng );
@@ -2004,6 +2039,7 @@
         MBEDTLS_SSL_DEBUG_RET( 1 , "mbedtls_ecjpake_write_round_one", ret );
         return;
     }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
     MBEDTLS_PUT_UINT16_BE( kkpp_len, p, 0 );
     p += 2;
@@ -2813,6 +2849,46 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        unsigned char *out_p = ssl->out_msg + ssl->out_msglen;
+        unsigned char *end_p = ssl->out_msg + MBEDTLS_SSL_OUT_CONTENT_LEN -
+                               ssl->out_msglen;
+        size_t output_offset = 0;
+        size_t output_len = 0;
+        const mbedtls_ecp_curve_info *curve_info;
+
+        /*
+         * The first 3 bytes are:
+         * [0] MBEDTLS_ECP_TLS_NAMED_CURVE
+         * [1, 2] elliptic curve's TLS ID
+         *
+         * However since we only support secp256r1 for now, we hardcode its
+         * TLS ID here
+         */
+        if( ( curve_info = mbedtls_ecp_curve_info_from_grp_id(
+                                    MBEDTLS_ECP_DP_SECP256R1 ) ) == NULL )
+        {
+            return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+        }
+        *out_p = MBEDTLS_ECP_TLS_NAMED_CURVE;
+        MBEDTLS_PUT_UINT16_BE( curve_info->tls_id, out_p, 1 );
+        output_offset += 3;
+
+        ret = mbedtls_psa_ecjpake_write_round( &ssl->handshake->psa_pake_ctx,
+                                    out_p + output_offset,
+                                    end_p - out_p - output_offset, &output_len,
+                                    MBEDTLS_ECJPAKE_ROUND_TWO );
+        if( ret != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+            MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+            return( ret );
+        }
+
+        output_offset += output_len;
+        ssl->out_msglen += output_offset;
+#else
         size_t len = 0;
 
         ret = mbedtls_ecjpake_write_round_two(
@@ -2827,6 +2903,7 @@
         }
 
         ssl->out_msglen += len;
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
@@ -4044,6 +4121,18 @@
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        if( ( ret = mbedtls_psa_ecjpake_read_round(
+                        &ssl->handshake->psa_pake_ctx, p, end - p,
+                        MBEDTLS_ECJPAKE_ROUND_TWO ) ) != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+            MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round two", ret );
+            return( ret );
+        }
+#else
         ret = mbedtls_ecjpake_read_round_two( &ssl->handshake->ecjpake_ctx,
                                               p, end - p );
         if( ret != 0 )
@@ -4060,6 +4149,7 @@
             MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_derive_secret", ret );
             return( ret );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
diff --git a/library/ssl_tls13_client.c b/library/ssl_tls13_client.c
index 0372f2d..0109f77 100644
--- a/library/ssl_tls13_client.c
+++ b/library/ssl_tls13_client.c
@@ -1183,11 +1183,11 @@
             return( ret );
         p += ext_len;
 
-        /* Initializes the status to `indication sent`. It will be updated to
-         * `accepted` or `rejected` depending on whether the EncryptedExtension
-         * message will contain an early data indication extension or not.
+        /* Initializes the status to `rejected`. It will be updated to
+         * `accepted` if the EncryptedExtension message contain an early data
+         * indication extension.
          */
-        ssl->early_data_status = MBEDTLS_SSL_EARLY_DATA_STATUS_INDICATION_SENT;
+        ssl->early_data_status = MBEDTLS_SSL_EARLY_DATA_STATUS_REJECTED;
     }
     else
     {
@@ -2060,6 +2060,21 @@
 
                 break;
 #endif /* MBEDTLS_SSL_ALPN */
+
+#if defined(MBEDTLS_SSL_EARLY_DATA)
+            case MBEDTLS_TLS_EXT_EARLY_DATA:
+
+                if( extension_data_len != 0 )
+                {
+                    /* The message must be empty. */
+                    MBEDTLS_SSL_PEND_FATAL_ALERT( MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR,
+                                                  MBEDTLS_ERR_SSL_DECODE_ERROR );
+                    return( MBEDTLS_ERR_SSL_DECODE_ERROR );
+                }
+
+                break;
+#endif /* MBEDTLS_SSL_EARLY_DATA */
+
             default:
                 MBEDTLS_SSL_PRINT_EXT(
                     3, MBEDTLS_SSL_HS_ENCRYPTED_EXTENSIONS,
@@ -2102,6 +2117,14 @@
     MBEDTLS_SSL_PROC_CHK(
         ssl_tls13_parse_encrypted_extensions( ssl, buf, buf + buf_len ) );
 
+#if defined(MBEDTLS_SSL_EARLY_DATA)
+    if( ssl->handshake->received_extensions &
+        MBEDTLS_SSL_EXT_MASK( EARLY_DATA ) )
+    {
+        ssl->early_data_status = MBEDTLS_SSL_EARLY_DATA_STATUS_ACCEPTED;
+    }
+#endif
+
     mbedtls_ssl_add_hs_msg_to_checksum( ssl, MBEDTLS_SSL_HS_ENCRYPTED_EXTENSIONS,
                                         buf, buf_len );
 
@@ -2743,7 +2766,7 @@
 }
 
 /*
- * Handler for MBEDTLS_SSL_NEW_SESSION_TICKET
+ * Handler for MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET
  */
 MBEDTLS_CHECK_RETURN_CRITICAL
 static int ssl_tls13_process_new_session_ticket( mbedtls_ssl_context *ssl )
@@ -2857,7 +2880,7 @@
 #endif /* MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE */
 
 #if defined(MBEDTLS_SSL_SESSION_TICKETS)
-        case MBEDTLS_SSL_NEW_SESSION_TICKET:
+        case MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET:
             ret = ssl_tls13_process_new_session_ticket( ssl );
             if( ret != 0 )
                 break;
diff --git a/library/ssl_tls13_server.c b/library/ssl_tls13_server.c
index 3cd0310..ce8767c 100644
--- a/library/ssl_tls13_server.c
+++ b/library/ssl_tls13_server.c
@@ -2628,7 +2628,7 @@
     mbedtls_ssl_tls13_handshake_wrapup( ssl );
 
 #if defined(MBEDTLS_SSL_SESSION_TICKETS)
-    mbedtls_ssl_handshake_set_state( ssl, MBEDTLS_SSL_NEW_SESSION_TICKET );
+    mbedtls_ssl_handshake_set_state( ssl, MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET );
 #else
     mbedtls_ssl_handshake_set_state( ssl, MBEDTLS_SSL_HANDSHAKE_OVER );
 #endif
@@ -2636,7 +2636,7 @@
 }
 
 /*
- * Handler for MBEDTLS_SSL_NEW_SESSION_TICKET
+ * Handler for MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET
  */
 #define SSL_NEW_SESSION_TICKET_SKIP  0
 #define SSL_NEW_SESSION_TICKET_WRITE 1
@@ -2872,7 +2872,7 @@
 }
 
 /*
- * Handler for MBEDTLS_SSL_NEW_SESSION_TICKET
+ * Handler for MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET
  */
 static int ssl_tls13_write_new_session_ticket( mbedtls_ssl_context *ssl )
 {
@@ -2908,8 +2908,8 @@
         else
             ssl->handshake->new_session_tickets_count--;
 
-        mbedtls_ssl_handshake_set_state( ssl,
-                                         MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH );
+        mbedtls_ssl_handshake_set_state(
+            ssl, MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH );
     }
     else
     {
@@ -3045,7 +3045,7 @@
 #endif /* MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED */
 
 #if defined(MBEDTLS_SSL_SESSION_TICKETS)
-        case MBEDTLS_SSL_NEW_SESSION_TICKET:
+        case MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET:
             ret = ssl_tls13_write_new_session_ticket( ssl );
             if( ret != 0 )
             {
@@ -3054,9 +3054,9 @@
                                        ret );
             }
             break;
-        case MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH:
+        case MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH:
             /* This state is necessary to do the flush of the New Session
-             * Ticket message written in MBEDTLS_SSL_NEW_SESSION_TICKET
+             * Ticket message written in MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET
              * as part of ssl_prepare_handshake_step.
              */
             ret = 0;
@@ -3064,7 +3064,7 @@
             if( ssl->handshake->new_session_tickets_count == 0 )
                 mbedtls_ssl_handshake_set_state( ssl, MBEDTLS_SSL_HANDSHAKE_OVER );
             else
-                mbedtls_ssl_handshake_set_state( ssl, MBEDTLS_SSL_NEW_SESSION_TICKET );
+                mbedtls_ssl_handshake_set_state( ssl, MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET );
             break;
 
 #endif /* MBEDTLS_SSL_SESSION_TICKETS */
diff --git a/scripts/mbedtls_dev/bignum_common.py b/scripts/mbedtls_dev/bignum_common.py
index 8b11bc2..67ea78d 100644
--- a/scripts/mbedtls_dev/bignum_common.py
+++ b/scripts/mbedtls_dev/bignum_common.py
@@ -15,7 +15,12 @@
 # limitations under the License.
 
 from abc import abstractmethod
-from typing import Iterator, List, Tuple, TypeVar
+from typing import Iterator, List, Tuple, TypeVar, Any
+from itertools import chain
+
+from . import test_case
+from . import test_data_generation
+from .bignum_data import INPUTS_DEFAULT, MODULI_DEFAULT
 
 T = TypeVar('T') #pylint: disable=invalid-name
 
@@ -63,8 +68,7 @@
     """Return all pair combinations from input values."""
     return [(x, y) for x in values for y in values]
 
-
-class OperationCommon:
+class OperationCommon(test_data_generation.BaseTest):
     """Common features for bignum binary operations.
 
     This adds functionality common in binary operation tests.
@@ -78,22 +82,106 @@
         unique_combinations_only: Boolean to select if test case combinations
             must be unique. If True, only A,B or B,A would be included as a test
             case. If False, both A,B and B,A would be included.
+        input_style: Controls the way how test data is passed to the functions
+            in the generated test cases. "variable" passes them as they are
+            defined in the python source. "arch_split" pads the values with
+            zeroes depending on the architecture/limb size. If this is set,
+            test cases are generated for all architectures.
+        arity: the number of operands for the operation. Currently supported
+            values are 1 and 2.
     """
     symbol = ""
-    input_values = [] # type: List[str]
-    input_cases = [] # type: List[Tuple[str, str]]
-    unique_combinations_only = True
+    input_values = INPUTS_DEFAULT # type: List[str]
+    input_cases = [] # type: List[Any]
+    unique_combinations_only = False
+    input_styles = ["variable", "fixed", "arch_split"] # type: List[str]
+    input_style = "variable" # type: str
+    limb_sizes = [32, 64] # type: List[int]
+    arities = [1, 2]
+    arity = 2
 
-    def __init__(self, val_a: str, val_b: str) -> None:
-        self.arg_a = val_a
-        self.arg_b = val_b
+    def __init__(self, val_a: str, val_b: str = "0", bits_in_limb: int = 32) -> None:
+        self.val_a = val_a
+        self.val_b = val_b
+        # Setting the int versions here as opposed to making them @properties
+        # provides earlier/more robust input validation.
         self.int_a = hex_to_int(val_a)
         self.int_b = hex_to_int(val_b)
+        if bits_in_limb not in self.limb_sizes:
+            raise ValueError("Invalid number of bits in limb!")
+        if self.input_style == "arch_split":
+            self.dependencies = ["MBEDTLS_HAVE_INT{:d}".format(bits_in_limb)]
+        self.bits_in_limb = bits_in_limb
+
+    @property
+    def boundary(self) -> int:
+        if self.arity == 1:
+            return self.int_a
+        elif self.arity == 2:
+            return max(self.int_a, self.int_b)
+        raise ValueError("Unsupported number of operands!")
+
+    @property
+    def limb_boundary(self) -> int:
+        return bound_mpi(self.boundary, self.bits_in_limb)
+
+    @property
+    def limbs(self) -> int:
+        return limbs_mpi(self.boundary, self.bits_in_limb)
+
+    @property
+    def hex_digits(self) -> int:
+        return 2 * (self.limbs * self.bits_in_limb // 8)
+
+    def format_arg(self, val) -> str:
+        if self.input_style not in self.input_styles:
+            raise ValueError("Unknown input style!")
+        if self.input_style == "variable":
+            return val
+        else:
+            return val.zfill(self.hex_digits)
+
+    def format_result(self, res) -> str:
+        res_str = '{:x}'.format(res)
+        return quote_str(self.format_arg(res_str))
+
+    @property
+    def arg_a(self) -> str:
+        return self.format_arg(self.val_a)
+
+    @property
+    def arg_b(self) -> str:
+        if self.arity == 1:
+            raise AttributeError("Operation is unary and doesn't have arg_b!")
+        return self.format_arg(self.val_b)
 
     def arguments(self) -> List[str]:
-        return [
-            quote_str(self.arg_a), quote_str(self.arg_b)
-        ] + self.result()
+        args = [quote_str(self.arg_a)]
+        if self.arity == 2:
+            args.append(quote_str(self.arg_b))
+        return args + self.result()
+
+    def description(self) -> str:
+        """Generate a description for the test case.
+
+        If not set, case_description uses the form A `symbol` B, where symbol
+        is used to represent the operation. Descriptions of each value are
+        generated to provide some context to the test case.
+        """
+        if not self.case_description:
+            if self.arity == 1:
+                self.case_description = "{} {:x}".format(
+                    self.symbol, self.int_a
+                )
+            elif self.arity == 2:
+                self.case_description = "{:x} {} {:x}".format(
+                    self.int_a, self.symbol, self.int_b
+                )
+        return super().description()
+
+    @property
+    def is_valid(self) -> bool:
+        return True
 
     @abstractmethod
     def result(self) -> List[str]:
@@ -111,15 +199,134 @@
         Combinations are first generated from all input values, and then
         specific cases provided.
         """
-        if cls.unique_combinations_only:
-            yield from combination_pairs(cls.input_values)
+        if cls.arity == 1:
+            yield from ((a, "0") for a in cls.input_values)
+        elif cls.arity == 2:
+            if cls.unique_combinations_only:
+                yield from combination_pairs(cls.input_values)
+            else:
+                yield from (
+                    (a, b)
+                    for a in cls.input_values
+                    for b in cls.input_values
+                )
         else:
-            yield from (
-                (a, b)
-                for a in cls.input_values
-                for b in cls.input_values
-            )
-        yield from cls.input_cases
+            raise ValueError("Unsupported number of operands!")
+
+    @classmethod
+    def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
+        if cls.input_style not in cls.input_styles:
+            raise ValueError("Unknown input style!")
+        if cls.arity not in cls.arities:
+            raise ValueError("Unsupported number of operands!")
+        if cls.input_style == "arch_split":
+            test_objects = (cls(a, b, bits_in_limb=bil)
+                            for a, b in cls.get_value_pairs()
+                            for bil in cls.limb_sizes)
+            special_cases = (cls(*args, bits_in_limb=bil) # type: ignore
+                             for args in cls.input_cases
+                             for bil in cls.limb_sizes)
+        else:
+            test_objects = (cls(a, b)
+                            for a, b in cls.get_value_pairs())
+            special_cases = (cls(*args) for args in cls.input_cases)
+        yield from (valid_test_object.create_test_case()
+                    for valid_test_object in filter(
+                        lambda test_object: test_object.is_valid,
+                        chain(test_objects, special_cases)
+                        )
+                    )
+
+
+class ModOperationCommon(OperationCommon):
+    #pylint: disable=abstract-method
+    """Target for bignum mod_raw test case generation."""
+    moduli = MODULI_DEFAULT # type: List[str]
+
+    def __init__(self, val_n: str, val_a: str, val_b: str = "0",
+                 bits_in_limb: int = 64) -> None:
+        super().__init__(val_a=val_a, val_b=val_b, bits_in_limb=bits_in_limb)
+        self.val_n = val_n
+        # Setting the int versions here as opposed to making them @properties
+        # provides earlier/more robust input validation.
+        self.int_n = hex_to_int(val_n)
+
+    @property
+    def boundary(self) -> int:
+        return self.int_n
+
+    @property
+    def arg_n(self) -> str:
+        return self.format_arg(self.val_n)
+
+    def arguments(self) -> List[str]:
+        return [quote_str(self.arg_n)] + super().arguments()
+
+    @property
+    def r(self) -> int: # pylint: disable=invalid-name
+        l = limbs_mpi(self.int_n, self.bits_in_limb)
+        return bound_mpi_limbs(l, self.bits_in_limb)
+
+    @property
+    def r_inv(self) -> int:
+        return invmod(self.r, self.int_n)
+
+    @property
+    def r2(self) -> int: # pylint: disable=invalid-name
+        return pow(self.r, 2)
+
+    @property
+    def is_valid(self) -> bool:
+        if self.int_a >= self.int_n:
+            return False
+        if self.arity == 2 and self.int_b >= self.int_n:
+            return False
+        return True
+
+    def description(self) -> str:
+        """Generate a description for the test case.
+
+        It uses the form A `symbol` B mod N, where symbol is used to represent
+        the operation.
+        """
+
+        if not self.case_description:
+            return super().description() + " mod {:x}".format(self.int_n)
+        return super().description()
+
+    @classmethod
+    def input_cases_args(cls) -> Iterator[Tuple[Any, Any, Any]]:
+        if cls.arity == 1:
+            yield from ((n, a, "0") for a, n in cls.input_cases)
+        elif cls.arity == 2:
+            yield from ((n, a, b) for a, b, n in cls.input_cases)
+        else:
+            raise ValueError("Unsupported number of operands!")
+
+    @classmethod
+    def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
+        if cls.input_style not in cls.input_styles:
+            raise ValueError("Unknown input style!")
+        if cls.arity not in cls.arities:
+            raise ValueError("Unsupported number of operands!")
+        if cls.input_style == "arch_split":
+            test_objects = (cls(n, a, b, bits_in_limb=bil)
+                            for n in cls.moduli
+                            for a, b in cls.get_value_pairs()
+                            for bil in cls.limb_sizes)
+            special_cases = (cls(*args, bits_in_limb=bil)
+                             for args in cls.input_cases_args()
+                             for bil in cls.limb_sizes)
+        else:
+            test_objects = (cls(n, a, b)
+                            for n in cls.moduli
+                            for a, b in cls.get_value_pairs())
+            special_cases = (cls(*args) for args in cls.input_cases_args())
+        yield from (valid_test_object.create_test_case()
+                    for valid_test_object in filter(
+                        lambda test_object: test_object.is_valid,
+                        chain(test_objects, special_cases)
+                        ))
 
 # BEGIN MERGE SLOT 1
 
diff --git a/scripts/mbedtls_dev/bignum_core.py b/scripts/mbedtls_dev/bignum_core.py
index 0cc86b8..b8e2a31 100644
--- a/scripts/mbedtls_dev/bignum_core.py
+++ b/scripts/mbedtls_dev/bignum_core.py
@@ -16,20 +16,19 @@
 
 import random
 
-from abc import ABCMeta
 from typing import Dict, Iterator, List, Tuple
 
 from . import test_case
 from . import test_data_generation
 from . import bignum_common
 
-class BignumCoreTarget(test_data_generation.BaseTarget, metaclass=ABCMeta):
-    #pylint: disable=abstract-method
+class BignumCoreTarget(test_data_generation.BaseTarget):
+    #pylint: disable=abstract-method, too-few-public-methods
     """Target for bignum core test case generation."""
     target_basename = 'test_suite_bignum_core.generated'
 
 
-class BignumCoreShiftR(BignumCoreTarget, metaclass=ABCMeta):
+class BignumCoreShiftR(BignumCoreTarget, test_data_generation.BaseTest):
     """Test cases for mbedtls_bignum_core_shift_r()."""
     count = 0
     test_function = "mpi_core_shift_r"
@@ -69,7 +68,7 @@
             for count in counts:
                 yield cls(input_hex, descr, count).create_test_case()
 
-class BignumCoreCTLookup(BignumCoreTarget, metaclass=ABCMeta):
+class BignumCoreCTLookup(BignumCoreTarget, test_data_generation.BaseTest):
     """Test cases for mbedtls_mpi_core_ct_uint_table_lookup()."""
     test_function = "mpi_core_ct_uint_table_lookup"
     test_name = "Constant time MPI table lookup"
@@ -107,104 +106,33 @@
                 yield (cls(bitsize, bitsize_description, window_size)
                        .create_test_case())
 
-class BignumCoreOperation(bignum_common.OperationCommon, BignumCoreTarget, metaclass=ABCMeta):
-    #pylint: disable=abstract-method
-    """Common features for bignum core operations."""
-    input_values = [
-        "0", "1", "3", "f", "fe", "ff", "100", "ff00", "fffe", "ffff", "10000",
-        "fffffffe", "ffffffff", "100000000", "1f7f7f7f7f7f7f",
-        "8000000000000000", "fefefefefefefefe", "fffffffffffffffe",
-        "ffffffffffffffff", "10000000000000000", "1234567890abcdef0",
-        "fffffffffffffffffefefefefefefefe", "fffffffffffffffffffffffffffffffe",
-        "ffffffffffffffffffffffffffffffff", "100000000000000000000000000000000",
-        "1234567890abcdef01234567890abcdef0",
-        "fffffffffffffffffffffffffffffffffffffffffffffffffefefefefefefefe",
-        "fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe",
-        "ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff",
-        "10000000000000000000000000000000000000000000000000000000000000000",
-        "1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0",
-        (
-            "4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029"
-            "643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947"
-            "c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0"
-            "cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b"
-        )
-    ]
 
-    def description(self) -> str:
-        """Generate a description for the test case.
-
-        If not set, case_description uses the form A `symbol` B, where symbol
-        is used to represent the operation. Descriptions of each value are
-        generated to provide some context to the test case.
-        """
-        if not self.case_description:
-            self.case_description = "{:x} {} {:x}".format(
-                self.int_a, self.symbol, self.int_b
-            )
-        return super().description()
-
-    @classmethod
-    def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
-        for a_value, b_value in cls.get_value_pairs():
-            yield cls(a_value, b_value).create_test_case()
-
-
-class BignumCoreOperationArchSplit(BignumCoreOperation):
-    #pylint: disable=abstract-method
-    """Common features for bignum core operations where the result depends on
-    the limb size."""
-
-    def __init__(self, val_a: str, val_b: str, bits_in_limb: int) -> None:
-        super().__init__(val_a, val_b)
-        bound_val = max(self.int_a, self.int_b)
-        self.bits_in_limb = bits_in_limb
-        self.bound = bignum_common.bound_mpi(bound_val, self.bits_in_limb)
-        limbs = bignum_common.limbs_mpi(bound_val, self.bits_in_limb)
-        byte_len = limbs * self.bits_in_limb // 8
-        self.hex_digits = 2 * byte_len
-        if self.bits_in_limb == 32:
-            self.dependencies = ["MBEDTLS_HAVE_INT32"]
-        elif self.bits_in_limb == 64:
-            self.dependencies = ["MBEDTLS_HAVE_INT64"]
-        else:
-            raise ValueError("Invalid number of bits in limb!")
-        self.arg_a = self.arg_a.zfill(self.hex_digits)
-        self.arg_b = self.arg_b.zfill(self.hex_digits)
-
-    def pad_to_limbs(self, val) -> str:
-        return "{:x}".format(val).zfill(self.hex_digits)
-
-    @classmethod
-    def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
-        for a_value, b_value in cls.get_value_pairs():
-            yield cls(a_value, b_value, 32).create_test_case()
-            yield cls(a_value, b_value, 64).create_test_case()
-
-class BignumCoreAddAndAddIf(BignumCoreOperationArchSplit):
+class BignumCoreAddAndAddIf(BignumCoreTarget, bignum_common.OperationCommon):
     """Test cases for bignum core add and add-if."""
     count = 0
     symbol = "+"
     test_function = "mpi_core_add_and_add_if"
     test_name = "mpi_core_add_and_add_if"
+    input_style = "arch_split"
+    unique_combinations_only = True
 
     def result(self) -> List[str]:
         result = self.int_a + self.int_b
 
-        carry, result = divmod(result, self.bound)
+        carry, result = divmod(result, self.limb_boundary)
 
         return [
-            bignum_common.quote_str(self.pad_to_limbs(result)),
+            self.format_result(result),
             str(carry)
         ]
 
-class BignumCoreSub(BignumCoreOperation):
+
+class BignumCoreSub(BignumCoreTarget, bignum_common.OperationCommon):
     """Test cases for bignum core sub."""
     count = 0
     symbol = "-"
     test_function = "mpi_core_sub"
     test_name = "mbedtls_mpi_core_sub"
-    unique_combinations_only = False
 
     def result(self) -> List[str]:
         if self.int_a >= self.int_b:
@@ -224,12 +152,11 @@
         ]
 
 
-class BignumCoreMLA(BignumCoreOperation):
+class BignumCoreMLA(BignumCoreTarget, bignum_common.OperationCommon):
     """Test cases for fixed-size multiply accumulate."""
     count = 0
     test_function = "mpi_core_mla"
     test_name = "mbedtls_mpi_core_mla"
-    unique_combinations_only = False
 
     input_values = [
         "0", "1", "fffe", "ffffffff", "100000000", "20000000000000",
@@ -289,6 +216,16 @@
         ]
 
     @classmethod
+    def get_value_pairs(cls) -> Iterator[Tuple[str, str]]:
+        """Generator to yield pairs of inputs.
+
+        Combinations are first generated from all input values, and then
+        specific cases provided.
+        """
+        yield from super().get_value_pairs()
+        yield from cls.input_cases
+
+    @classmethod
     def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
         """Override for additional scalar input."""
         for a_value, b_value in cls.get_value_pairs():
@@ -297,7 +234,7 @@
                 yield cur_op.create_test_case()
 
 
-class BignumCoreMontmul(BignumCoreTarget):
+class BignumCoreMontmul(BignumCoreTarget, test_data_generation.BaseTest):
     """Test cases for Montgomery multiplication."""
     count = 0
     test_function = "mpi_core_montmul"
@@ -826,6 +763,37 @@
 
 # BEGIN MERGE SLOT 3
 
+class BignumCoreSubInt(BignumCoreTarget, bignum_common.OperationCommon):
+    """Test cases for bignum core sub int."""
+    count = 0
+    symbol = "-"
+    test_function = "mpi_core_sub_int"
+    test_name = "mpi_core_sub_int"
+    input_style = "arch_split"
+
+    @property
+    def is_valid(self) -> bool:
+        # This is "sub int", so b is only one limb
+        if bignum_common.limbs_mpi(self.int_b, self.bits_in_limb) > 1:
+            return False
+        return True
+
+    # Overriding because we don't want leading zeros on b
+    @property
+    def arg_b(self) -> str:
+        return self.val_b
+
+    def result(self) -> List[str]:
+        result = self.int_a - self.int_b
+
+        borrow, result = divmod(result, self.limb_boundary)
+
+        # Borrow will be -1 if non-zero, but we want it to be 1 in the test data
+        return [
+            self.format_result(result),
+            str(-borrow)
+        ]
+
 # END MERGE SLOT 3
 
 # BEGIN MERGE SLOT 4
diff --git a/scripts/mbedtls_dev/bignum_data.py b/scripts/mbedtls_dev/bignum_data.py
new file mode 100644
index 0000000..74d21d0
--- /dev/null
+++ b/scripts/mbedtls_dev/bignum_data.py
@@ -0,0 +1,136 @@
+"""Base values and datasets for bignum generated tests and helper functions that
+produced them."""
+# Copyright The Mbed TLS Contributors
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import random
+
+# Functions calling these were used to produce test data and are here only for
+# reproducability, they are not used by the test generation framework/classes
+try:
+    from Cryptodome.Util.number import isPrime, getPrime #type: ignore #pylint: disable=import-error
+except ImportError:
+    pass
+
+# Generated by bignum_common.gen_safe_prime(192,1)
+SAFE_PRIME_192_BIT_SEED_1 = "d1c127a667786703830500038ebaef20e5a3e2dc378fb75b"
+
+# First number generated by random.getrandbits(192) - seed(2,2), not a prime
+RANDOM_192_BIT_SEED_2_NO1 = "177219d30e7a269fd95bafc8f2a4d27bdcf4bb99f4bea973"
+
+# Second number generated by random.getrandbits(192) - seed(2,2), not a prime
+RANDOM_192_BIT_SEED_2_NO2 = "cf1822ffbc6887782b491044d5e341245c6e433715ba2bdd"
+
+# Third number generated by random.getrandbits(192) - seed(2,2), not a prime
+RANDOM_192_BIT_SEED_2_NO3 = "3653f8dd9b1f282e4067c3584ee207f8da94e3e8ab73738f"
+
+# Fourth number generated by random.getrandbits(192) - seed(2,2), not a prime
+RANDOM_192_BIT_SEED_2_NO4 = "ffed9235288bc781ae66267594c9c9500925e4749b575bd1"
+
+# Ninth number generated by random.getrandbits(192) - seed(2,2), not a prime
+RANDOM_192_BIT_SEED_2_NO9 = "2a1be9cd8697bbd0e2520e33e44c50556c71c4a66148a86f"
+
+# Generated by bignum_common.gen_safe_prime(1024,3)
+SAFE_PRIME_1024_BIT_SEED_3 = ("c93ba7ec74d96f411ba008bdb78e63ff11bb5df46a51e16b"
+                              "2c9d156f8e4e18abf5e052cb01f47d0d1925a77f60991577"
+                              "e128fb6f52f34a27950a594baadd3d8057abeb222cf3cca9"
+                              "62db16abf79f2ada5bd29ab2f51244bf295eff9f6aaba130"
+                              "2efc449b128be75eeaca04bc3c1a155d11d14e8be32a2c82"
+                              "87b3996cf6ad5223")
+
+# First number generated by random.getrandbits(1024) - seed(4,2), not a prime
+RANDOM_1024_BIT_SEED_4_NO1 = ("6905269ed6f0b09f165c8ce36e2f24b43000de01b2ed40ed"
+                              "3addccb2c33be0ac79d679346d4ac7a5c3902b38963dc6e8"
+                              "534f45738d048ec0f1099c6c3e1b258fd724452ccea71ff4"
+                              "a14876aeaff1a098ca5996666ceab360512bd13110722311"
+                              "710cf5327ac435a7a97c643656412a9b8a1abcd1a6916c74"
+                              "da4f9fc3c6da5d7")
+
+# Second number generated by random.getrandbits(1024) - seed(4,2), not a prime
+RANDOM_1024_BIT_SEED_4_NO2 = ("f1cfd99216df648647adec26793d0e453f5082492d83a823"
+                              "3fb62d2c81862fc9634f806fabf4a07c566002249b191bf4"
+                              "d8441b5616332aca5f552773e14b0190d93936e1daca3c06"
+                              "f5ff0c03bb5d7385de08caa1a08179104a25e4664f5253a0"
+                              "2a3187853184ff27459142deccea264542a00403ce80c4b0"
+                              "a4042bb3d4341aad")
+
+# Third number generated by random.getrandbits(1024) - seed(4,2), not a prime
+RANDOM_1024_BIT_SEED_4_NO3 = ("14c15c910b11ad28cc21ce88d0060cc54278c2614e1bcb38"
+                              "3bb4a570294c4ea3738d243a6e58d5ca49c7b59b995253fd"
+                              "6c79a3de69f85e3131f3b9238224b122c3e4a892d9196ada"
+                              "4fcfa583e1df8af9b474c7e89286a1754abcb06ae8abb93f"
+                              "01d89a024cdce7a6d7288ff68c320f89f1347e0cdd905ecf"
+                              "d160c5d0ef412ed6")
+
+# Fourth number generated by random.getrandbits(1024) - seed(4,2), not a prime
+RANDOM_1024_BIT_SEED_4_NO4 = ("32decd6b8efbc170a26a25c852175b7a96b98b5fbf37a2be"
+                              "6f98bca35b17b9662f0733c846bbe9e870ef55b1a1f65507"
+                              "a2909cb633e238b4e9dd38b869ace91311021c9e32111ac1"
+                              "ac7cc4a4ff4dab102522d53857c49391b36cc9aa78a330a1"
+                              "a5e333cb88dcf94384d4cd1f47ca7883ff5a52f1a05885ac"
+                              "7671863c0bdbc23a")
+
+# Fifth number generated by random.getrandbits(1024) - seed(4,2), not a prime
+RANDOM_1024_BIT_SEED_4_NO5 = ("53be4721f5b9e1f5acdac615bc20f6264922b9ccf469aef8"
+                              "f6e7d078e55b85dd1525f363b281b8885b69dc230af5ac87"
+                              "0692b534758240df4a7a03052d733dcdef40af2e54c0ce68"
+                              "1f44ebd13cc75f3edcb285f89d8cf4d4950b16ffc3e1ac3b"
+                              "4708d9893a973000b54a23020fc5b043d6e4a51519d9c9cc"
+                              "52d32377e78131c1")
+
+# Adding 192 bit and 1024 bit numbers because these are the shortest required
+# for ECC and RSA respectively.
+INPUTS_DEFAULT = [
+        "0", "1", # corner cases
+        "2", "3", # small primes
+        "4",      # non-prime even
+        "38",     # small random
+        SAFE_PRIME_192_BIT_SEED_1,  # prime
+        RANDOM_192_BIT_SEED_2_NO1,  # not a prime
+        RANDOM_192_BIT_SEED_2_NO2,  # not a prime
+        SAFE_PRIME_1024_BIT_SEED_3, # prime
+        RANDOM_1024_BIT_SEED_4_NO1, # not a prime
+        RANDOM_1024_BIT_SEED_4_NO3, # not a prime
+        RANDOM_1024_BIT_SEED_4_NO2, # largest (not a prime)
+        ]
+
+# Only odd moduli are present as in the new bignum code only odd moduli are
+# supported for now.
+MODULI_DEFAULT = [
+        "53", # safe prime
+        "45", # non-prime
+        SAFE_PRIME_192_BIT_SEED_1,  # safe prime
+        RANDOM_192_BIT_SEED_2_NO4,  # not a prime
+        SAFE_PRIME_1024_BIT_SEED_3, # safe prime
+        RANDOM_1024_BIT_SEED_4_NO5, # not a prime
+        ]
+
+def __gen_safe_prime(bits, seed):
+    '''
+    Generate a safe prime.
+
+    This function is intended for generating constants offline and shouldn't be
+    used in test generation classes.
+
+    Requires pycryptodomex for getPrime and isPrime and python 3.9 or later for
+    randbytes.
+    '''
+    rng = random.Random()
+    # We want reproducability across python versions
+    rng.seed(seed, version=2)
+    while True:
+        prime = 2*getPrime(bits-1, rng.randbytes)+1 #pylint: disable=no-member
+        if isPrime(prime, 1e-30):
+            return prime
diff --git a/scripts/mbedtls_dev/bignum_mod.py b/scripts/mbedtls_dev/bignum_mod.py
index 2bd7fbb..a604cc0 100644
--- a/scripts/mbedtls_dev/bignum_mod.py
+++ b/scripts/mbedtls_dev/bignum_mod.py
@@ -14,12 +14,10 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-from abc import ABCMeta
-
 from . import test_data_generation
 
-class BignumModTarget(test_data_generation.BaseTarget, metaclass=ABCMeta):
-    #pylint: disable=abstract-method
+class BignumModTarget(test_data_generation.BaseTarget):
+    #pylint: disable=abstract-method, too-few-public-methods
     """Target for bignum mod test case generation."""
     target_basename = 'test_suite_bignum_mod.generated'
 
diff --git a/scripts/mbedtls_dev/bignum_mod_raw.py b/scripts/mbedtls_dev/bignum_mod_raw.py
index bd694a6..60f2fed 100644
--- a/scripts/mbedtls_dev/bignum_mod_raw.py
+++ b/scripts/mbedtls_dev/bignum_mod_raw.py
@@ -14,89 +14,16 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-from abc import ABCMeta
-from typing import Dict, Iterator, List
+from typing import Dict, List
 
-from . import test_case
 from . import test_data_generation
 from . import bignum_common
 
-class BignumModRawTarget(test_data_generation.BaseTarget, metaclass=ABCMeta):
-    #pylint: disable=abstract-method
+class BignumModRawTarget(test_data_generation.BaseTarget):
+    #pylint: disable=abstract-method, too-few-public-methods
     """Target for bignum mod_raw test case generation."""
     target_basename = 'test_suite_bignum_mod_raw.generated'
 
-class BignumModRawOperation(bignum_common.OperationCommon, BignumModRawTarget, metaclass=ABCMeta):
-    #pylint: disable=abstract-method
-    """Target for bignum mod_raw test case generation."""
-
-    def __init__(self, val_n: str, val_a: str, val_b: str = "0", bits_in_limb: int = 64) -> None:
-        super().__init__(val_a=val_a, val_b=val_b)
-        self.val_n = val_n
-        self.bits_in_limb = bits_in_limb
-
-    @property
-    def int_n(self) -> int:
-        return bignum_common.hex_to_int(self.val_n)
-
-    @property
-    def boundary(self) -> int:
-        data_in = [self.int_a, self.int_b, self.int_n]
-        return max([n for n in data_in if n is not None])
-
-    @property
-    def limbs(self) -> int:
-        return bignum_common.limbs_mpi(self.boundary, self.bits_in_limb)
-
-    @property
-    def hex_digits(self) -> int:
-        return 2 * (self.limbs * self.bits_in_limb // 8)
-
-    @property
-    def hex_n(self) -> str:
-        return "{:x}".format(self.int_n).zfill(self.hex_digits)
-
-    @property
-    def hex_a(self) -> str:
-        return "{:x}".format(self.int_a).zfill(self.hex_digits)
-
-    @property
-    def hex_b(self) -> str:
-        return "{:x}".format(self.int_b).zfill(self.hex_digits)
-
-    @property
-    def r(self) -> int: # pylint: disable=invalid-name
-        l = bignum_common.limbs_mpi(self.int_n, self.bits_in_limb)
-        return bignum_common.bound_mpi_limbs(l, self.bits_in_limb)
-
-    @property
-    def r_inv(self) -> int:
-        return bignum_common.invmod(self.r, self.int_n)
-
-    @property
-    def r2(self) -> int: # pylint: disable=invalid-name
-        return pow(self.r, 2)
-
-class BignumModRawOperationArchSplit(BignumModRawOperation):
-    #pylint: disable=abstract-method
-    """Common features for bignum mod raw operations where the result depends on
-    the limb size."""
-
-    limb_sizes = [32, 64] # type: List[int]
-
-    def __init__(self, val_n: str, val_a: str, val_b: str = "0", bits_in_limb: int = 64) -> None:
-        super().__init__(val_n=val_n, val_a=val_a, val_b=val_b, bits_in_limb=bits_in_limb)
-
-        if bits_in_limb not in self.limb_sizes:
-            raise ValueError("Invalid number of bits in limb!")
-
-        self.dependencies = ["MBEDTLS_HAVE_INT{:d}".format(bits_in_limb)]
-
-    @classmethod
-    def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
-        for a_value, b_value in cls.get_value_pairs():
-            for bil in cls.limb_sizes:
-                yield cls(a_value, b_value, bits_in_limb=bil).create_test_case()
 # BEGIN MERGE SLOT 1
 
 # END MERGE SLOT 1
@@ -122,126 +49,35 @@
 # END MERGE SLOT 6
 
 # BEGIN MERGE SLOT 7
-class BignumModRawConvertToMont(BignumModRawOperationArchSplit):
-    """ Test cases for mpi_mod_raw_to_mont_rep(). """
 
+class BignumModRawConvertToMont(bignum_common.ModOperationCommon,
+                                BignumModRawTarget):
+    """ Test cases for mpi_mod_raw_to_mont_rep(). """
     test_function = "mpi_mod_raw_to_mont_rep"
     test_name = "Convert into Mont: "
-
-    test_data_moduli = ["b",
-                        "fd",
-                        "eeff99aa37",
-                        "eeff99aa11",
-                        "800000000005",
-                        "7fffffffffffffff",
-                        "80fe000a10000001",
-                        "25a55a46e5da99c71c7",
-                        "1058ad82120c3a10196bb36229c1",
-                        "7e35b84cb19ea5bc57ec37f5e431462fa962d98c1e63738d4657f"
-                        "18ad6532e6adc3eafe67f1e5fa262af94cee8d3e7268593942a2a"
-                        "98df75154f8c914a282f8b",
-                        "8335616aed761f1f7f44e6bd49e807b82e3bf2bf11bfa63",
-                        "ffcece570f2f991013f26dd5b03c4c5b65f97be5905f36cb4664f"
-                        "2c78ff80aa8135a4aaf57ccb8a0aca2f394909a74cef1ef6758a6"
-                        "4d11e2c149c393659d124bfc94196f0ce88f7d7d567efa5a649e2"
-                        "deefaa6e10fdc3deac60d606bf63fc540ac95294347031aefd73d"
-                        "6a9ee10188aaeb7a90d920894553cb196881691cadc51808715a0"
-                        "7e8b24fcb1a63df047c7cdf084dd177ba368c806f3d51ddb5d389"
-                        "8c863e687ecaf7d649a57a46264a582f94d3c8f2edaf59f77a7f6"
-                        "bdaf83c991e8f06abe220ec8507386fce8c3da84c6c3903ab8f3a"
-                        "d4630a204196a7dbcbd9bcca4e40ec5cc5c09938d49f5e1e6181d"
-                        "b8896f33bb12e6ef73f12ec5c5ea7a8a337"
-                        ]
-
-    test_input_numbers = ["0",
-                          "1",
-                          "97",
-                          "f5",
-                          "6f5c3",
-                          "745bfe50f7",
-                          "ffa1f9924123",
-                          "334a8b983c79bd",
-                          "5b84f632b58f3461",
-                          "19acd15bc38008e1",
-                          "ffffffffffffffff",
-                          "54ce6a6bb8247fa0427cfc75a6b0599",
-                          "fecafe8eca052f154ce6a6bb8247fa019558bfeecce9bb9",
-                          "a87d7a56fa4bfdc7da42ef798b9cf6843d4c54794698cb14d72"
-                          "851dec9586a319f4bb6d5695acbd7c92e7a42a5ede6972adcbc"
-                          "f68425265887f2d721f462b7f1b91531bac29fa648facb8e3c6"
-                          "1bd5ae42d5a59ba1c89a95897bfe541a8ce1d633b98f379c481"
-                          "6f25e21f6ac49286b261adb4b78274fe5f61c187581f213e84b"
-                          "2a821e341ef956ecd5de89e6c1a35418cd74a549379d2d4594a"
-                          "577543147f8e35b3514e62cf3e89d1156cdc91ab5f4c928fbd6"
-                          "9148c35df5962fed381f4d8a62852a36823d5425f7487c13a12"
-                          "523473fb823aa9d6ea5f42e794e15f2c1a8785cf6b7d51a4617"
-                          "947fb3baf674f74a673cf1d38126983a19ed52c7439fab42c2185"
-                          ]
-
-    descr_tpl = '{} #{} N: \"{}\" A: \"{}\".'
+    symbol = "R *"
+    input_style = "arch_split"
+    arity = 1
 
     def result(self) -> List[str]:
-        return [self.hex_x]
+        result = (self.int_a * self.r) % self.int_n
+        return [self.format_result(result)]
 
-    def arguments(self) -> List[str]:
-        return [bignum_common.quote_str(n) for n in [self.hex_n,
-                                                     self.hex_a,
-                                                     self.hex_x]]
 
-    def description(self) -> str:
-        return self.descr_tpl.format(self.test_name,
-                                     self.count,
-                                     self.int_n,
-                                     self.int_a)
-
-    @classmethod
-    def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
-        for bil in [32, 64]:
-            for n in cls.test_data_moduli:
-                for i in cls.test_input_numbers:
-                    # Skip invalid combinations where A.limbs > N.limbs
-                    if bignum_common.hex_to_int(i) > bignum_common.hex_to_int(n):
-                        continue
-                    yield cls(n, i, bits_in_limb=bil).create_test_case()
-
-    @property
-    def x(self) -> int: # pylint: disable=invalid-name
-        return (self.int_a * self.r) % self.int_n
-
-    @property
-    def hex_x(self) -> str:
-        return "{:x}".format(self.x).zfill(self.hex_digits)
-
-class BignumModRawConvertFromMont(BignumModRawConvertToMont):
+class BignumModRawConvertFromMont(bignum_common.ModOperationCommon,
+                                  BignumModRawTarget):
     """ Test cases for mpi_mod_raw_from_mont_rep(). """
-
     test_function = "mpi_mod_raw_from_mont_rep"
     test_name = "Convert from Mont: "
+    symbol = "1/R *"
+    input_style = "arch_split"
+    arity = 1
 
-    test_input_numbers = ["0",
-                          "1",
-                          "3ca",
-                          "539ed428",
-                          "7dfe5c6beb35a2d6",
-                          "dca8de1c2adfc6d7aafb9b48e",
-                          "a7d17b6c4be72f3d5c16bf9c1af6fc933",
-                          "2fec97beec546f9553142ed52f147845463f579",
-                          "378dc83b8bc5a7b62cba495af4919578dce6d4f175cadc4f",
-                          "b6415f2a1a8e48a518345db11f56db3829c8f2c6415ab4a395a"
-                          "b3ac2ea4cbef4af86eb18a84eb6ded4c6ecbfc4b59c2879a675"
-                          "487f687adea9d197a84a5242a5cf6125ce19a6ad2e7341f1c57"
-                          "d43ea4f4c852a51cb63dabcd1c9de2b827a3146a3d175b35bea"
-                          "41ae75d2a286a3e9d43623152ac513dcdea1d72a7da846a8ab3"
-                          "58d9be4926c79cfb287cf1cf25b689de3b912176be5dcaf4d4c"
-                          "6e7cb839a4a3243a6c47c1e2c99d65c59d6fa3672575c2f1ca8"
-                          "de6a32e854ec9d8ec635c96af7679fce26d7d159e4a9da3bd74"
-                          "e1272c376cd926d74fe3fb164a5935cff3d5cdb92b35fe2cea32"
-                          "138a7e6bfbc319ebd1725dacb9a359cbf693f2ecb785efb9d627"
-                         ]
+    def result(self) -> List[str]:
+        result = (self.int_a * self.r_inv) % self.int_n
+        return [self.format_result(result)]
 
-    @property
-    def x(self): # pylint: disable=invalid-name
-        return (self.int_a * self.r_inv) % self.int_n
+
 # END MERGE SLOT 7
 
 # BEGIN MERGE SLOT 8
diff --git a/scripts/mbedtls_dev/test_data_generation.py b/scripts/mbedtls_dev/test_data_generation.py
index eec0f9d..02aa510 100644
--- a/scripts/mbedtls_dev/test_data_generation.py
+++ b/scripts/mbedtls_dev/test_data_generation.py
@@ -25,6 +25,7 @@
 import os
 import posixpath
 import re
+import inspect
 
 from abc import ABCMeta, abstractmethod
 from typing import Callable, Dict, Iterable, Iterator, List, Type, TypeVar
@@ -35,12 +36,8 @@
 T = TypeVar('T') #pylint: disable=invalid-name
 
 
-class BaseTarget(metaclass=ABCMeta):
-    """Base target for test case generation.
-
-    Child classes of this class represent an output file, and can be referred
-    to as file targets. These indicate where test cases will be written to for
-    all subclasses of the file target, which is set by `target_basename`.
+class BaseTest(metaclass=ABCMeta):
+    """Base class for test case generation.
 
     Attributes:
         count: Counter for test cases from this class.
@@ -48,8 +45,6 @@
             automatically generated using the class, or manually set.
         dependencies: A list of dependencies required for the test case.
         show_test_count: Toggle for inclusion of `count` in the test description.
-        target_basename: Basename of file to write generated tests to. This
-            should be specified in a child class of BaseTarget.
         test_function: Test function which the class generates cases for.
         test_name: A common name or description of the test function. This can
             be `test_function`, a clearer equivalent, or a short summary of the
@@ -59,7 +54,6 @@
     case_description = ""
     dependencies = [] # type: List[str]
     show_test_count = True
-    target_basename = ""
     test_function = ""
     test_name = ""
 
@@ -121,6 +115,21 @@
         """
         raise NotImplementedError
 
+
+class BaseTarget:
+    #pylint: disable=too-few-public-methods
+    """Base target for test case generation.
+
+    Child classes of this class represent an output file, and can be referred
+    to as file targets. These indicate where test cases will be written to for
+    all subclasses of the file target, which is set by `target_basename`.
+
+    Attributes:
+        target_basename: Basename of file to write generated tests to. This
+            should be specified in a child class of BaseTarget.
+    """
+    target_basename = ""
+
     @classmethod
     def generate_tests(cls) -> Iterator[test_case.TestCase]:
         """Generate test cases for the class and its subclasses.
@@ -132,7 +141,8 @@
         yield from `generate_tests()` in each. Calling this method on a class X
         will yield test cases from all classes derived from X.
         """
-        if cls.test_function:
+        if issubclass(cls, BaseTest) and not inspect.isabstract(cls):
+            #pylint: disable=no-member
             yield from cls.generate_function_tests()
         for subclass in sorted(cls.__subclasses__(), key=lambda c: c.__name__):
             yield from subclass.generate_tests()
diff --git a/tests/opt-testcases/tls13-misc.sh b/tests/opt-testcases/tls13-misc.sh
index edece45..ed42848 100755
--- a/tests/opt-testcases/tls13-misc.sh
+++ b/tests/opt-testcases/tls13-misc.sh
@@ -301,7 +301,7 @@
             -c "NewSessionTicket: early_data(42) extension received." \
             -c "ClientHello: early_data(42) extension exists." \
             -c "EncryptedExtensions: early_data(42) extension received." \
-            -c "EncryptedExtensions: early_data(42) extension ( ignored )." \
+            -c "EncryptedExtensions: early_data(42) extension exists." \
             -s "Parsing extension 'Early Data/42' (0 bytes)" \
             -s "Sending extension Early Data/42 (0 bytes)" \
             -s "early data accepted"
@@ -322,7 +322,7 @@
             -C "NewSessionTicket: early_data(42) extension received." \
             -c "ClientHello: early_data(42) extension does not exist." \
             -C "EncryptedExtensions: early_data(42) extension received." \
-            -C "EncryptedExtensions: early_data(42) extension ( ignored )."
+            -C "EncryptedExtensions: early_data(42) extension exists."
 
 #TODO: OpenSSL tests don't work now. It might be openssl options issue, cause GnuTLS has worked.
 skip_next_test
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index a20bbde..b43f999 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -1438,6 +1438,31 @@
     tests/ssl-opt.sh -f "TLS 1.2"
 }
 
+# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
+# that we could use for interop testing. However, we now have sort of two
+# implementations ourselves: one using PSA, the other not. At least test that
+# these two interoperate with each other.
+component_test_tls1_2_ecjpake_compatibility() {
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
+    scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    cp programs/ssl/ssl_server2 s2_no_use_psa
+    cp programs/ssl/ssl_client2 c2_no_use_psa
+
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    make clean
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    make -C programs test/udp_proxy test/query_compile_time_config
+
+    msg "test: server w/o USE_PSA - client w/ USE_PSA"
+    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f ECJPAKE
+    msg "test: client w/o USE_PSA - server w/ USE_PSA"
+    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f ECJPAKE
+
+    rm s2_no_use_psa c2_no_use_psa
+}
+
 component_test_psa_external_rng_use_psa_crypto () {
     msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
     scripts/config.py full
@@ -3252,6 +3277,7 @@
 
 component_test_tls13_only () {
     msg "build: default config with MBEDTLS_SSL_PROTO_TLS1_3, without MBEDTLS_SSL_PROTO_TLS1_2"
+    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
     make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
 
     msg "test: TLS 1.3 only, all key exchange modes enabled"
@@ -3272,6 +3298,7 @@
     scripts/config.py unset MBEDTLS_ECDSA_C
     scripts/config.py unset MBEDTLS_PKCS1_V21
     scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
     make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
 
     msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled"
@@ -3305,6 +3332,7 @@
     scripts/config.py unset MBEDTLS_ECDSA_C
     scripts/config.py unset MBEDTLS_PKCS1_V21
     scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
     make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
 
     msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode"
@@ -3323,6 +3351,7 @@
     scripts/config.py unset MBEDTLS_ECDSA_C
     scripts/config.py unset MBEDTLS_PKCS1_V21
     scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
     make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
 
     msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
@@ -3335,6 +3364,7 @@
 component_test_tls13_only_ephemeral_all () {
     msg "build: TLS 1.3 only from default, without PSK key exchange mode"
     scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
     make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
 
     msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
@@ -3349,6 +3379,7 @@
     scripts/config.py set MBEDTLS_SSL_PROTO_TLS1_3
     scripts/config.py set MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
     scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
+    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
     CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
     make
     msg "test: default config with MBEDTLS_SSL_PROTO_TLS1_3 enabled, without padding"
@@ -3362,6 +3393,7 @@
     scripts/config.py set   MBEDTLS_SSL_PROTO_TLS1_3
     scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
     scripts/config.py set   MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
     CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
     make
     msg "test: default config with MBEDTLS_SSL_PROTO_TLS1_3 enabled, without padding"
diff --git a/tests/scripts/generate_bignum_tests.py b/tests/scripts/generate_bignum_tests.py
index eee2f65..c3058e9 100755
--- a/tests/scripts/generate_bignum_tests.py
+++ b/tests/scripts/generate_bignum_tests.py
@@ -57,7 +57,7 @@
 import sys
 
 from abc import ABCMeta
-from typing import Iterator, List
+from typing import List
 
 import scripts_path # pylint: disable=unused-import
 from mbedtls_dev import test_case
@@ -68,15 +68,17 @@
 # the framework
 from mbedtls_dev import bignum_core, bignum_mod_raw # pylint: disable=unused-import
 
-class BignumTarget(test_data_generation.BaseTarget, metaclass=ABCMeta):
-    #pylint: disable=abstract-method
+class BignumTarget(test_data_generation.BaseTarget):
+    #pylint: disable=too-few-public-methods
     """Target for bignum (legacy) test case generation."""
     target_basename = 'test_suite_bignum.generated'
 
 
-class BignumOperation(bignum_common.OperationCommon, BignumTarget, metaclass=ABCMeta):
+class BignumOperation(bignum_common.OperationCommon, BignumTarget,
+                      metaclass=ABCMeta):
     #pylint: disable=abstract-method
     """Common features for bignum operations in legacy tests."""
+    unique_combinations_only = True
     input_values = [
         "", "0", "-", "-0",
         "7b", "-7b",
@@ -132,11 +134,6 @@
             tmp = "large " + tmp
         return tmp
 
-    @classmethod
-    def generate_function_tests(cls) -> Iterator[test_case.TestCase]:
-        for a_value, b_value in cls.get_value_pairs():
-            yield cls(a_value, b_value).create_test_case()
-
 
 class BignumCmp(BignumOperation):
     """Test cases for bignum value comparison."""
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index 6220527..b460c67 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -1362,7 +1362,7 @@
 
     if [ -n "$PXY_CMD" ]; then
         kill $PXY_PID >/dev/null 2>&1
-        wait $PXY_PID
+        wait $PXY_PID >> $PXY_OUT 2>&1
     fi
 }
 
@@ -12945,8 +12945,8 @@
             "$O_NEXT_CLI -msg -debug -tls1_3 -reconnect" \
             0 \
             -s "=> write NewSessionTicket msg" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH"
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH"
 
 requires_gnutls_tls1_3
 requires_config_enabled MBEDTLS_SSL_SESSION_TICKETS
@@ -12962,8 +12962,8 @@
             -c "Connecting again- trying to resume previous session" \
             -c "NEW SESSION TICKET (4) was received" \
             -s "=> write NewSessionTicket msg" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH" \
             -s "key exchange mode: ephemeral" \
             -s "key exchange mode: psk_ephemeral" \
             -s "found pre_shared_key extension"
@@ -12985,8 +12985,8 @@
             -c "Reconnecting with saved session" \
             -c "HTTP/1.0 200 OK"    \
             -s "=> write NewSessionTicket msg" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH" \
             -s "key exchange mode: ephemeral" \
             -s "key exchange mode: psk_ephemeral" \
             -s "found pre_shared_key extension"
@@ -13040,8 +13040,8 @@
             -c "Reconnecting with saved session" \
             -c "HTTP/1.0 200 OK"    \
             -s "=> write NewSessionTicket msg" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH" \
             -s "key exchange mode: ephemeral" \
             -s "key exchange mode: psk_ephemeral" \
             -s "found pre_shared_key extension"
@@ -13064,8 +13064,8 @@
             -c "Reconnecting with saved session" \
             -c "Hostname mismatch the session ticket, disable session resumption."    \
             -s "=> write NewSessionTicket msg" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET" \
-            -s "server state: MBEDTLS_SSL_NEW_SESSION_TICKET_FLUSH"
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET" \
+            -s "server state: MBEDTLS_SSL_TLS1_3_NEW_SESSION_TICKET_FLUSH"
 
 # Test heap memory usage after handshake
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
diff --git a/tests/suites/test_suite_bignum_core.function b/tests/suites/test_suite_bignum_core.function
index 612a7c6..d5bb420 100644
--- a/tests/suites/test_suite_bignum_core.function
+++ b/tests/suites/test_suite_bignum_core.function
@@ -1049,6 +1049,52 @@
 
 /* BEGIN MERGE SLOT 3 */
 
+/* BEGIN_CASE */
+void mpi_core_sub_int( char * input_A, char * input_B,
+                       char * input_X, int borrow )
+{
+    /* We are testing A - b, where A is an MPI and b is a scalar, expecting
+     * result X with borrow borrow.  However, for ease of handling we encode b
+     * as a 1-limb MPI (B) in the .data file. */
+
+    mbedtls_mpi_uint *A = NULL;
+    mbedtls_mpi_uint *B = NULL;
+    mbedtls_mpi_uint *X = NULL;
+    mbedtls_mpi_uint *R = NULL;
+    size_t A_limbs, B_limbs, X_limbs;
+
+    TEST_EQUAL( 0, mbedtls_test_read_mpi_core( &A, &A_limbs, input_A ) );
+    TEST_EQUAL( 0, mbedtls_test_read_mpi_core( &B, &B_limbs, input_B ) );
+    TEST_EQUAL( 0, mbedtls_test_read_mpi_core( &X, &X_limbs, input_X ) );
+
+    /* The MPI encoding of scalar b must be only 1 limb */
+    TEST_EQUAL( B_limbs, 1 );
+
+    /* The subtraction is fixed-width, so A and X must have the same number of limbs */
+    TEST_EQUAL( A_limbs, X_limbs );
+    size_t limbs = A_limbs;
+
+    ASSERT_ALLOC( R, limbs );
+
+#define TEST_COMPARE_CORE_MPIS( A, B, limbs ) \
+                ASSERT_COMPARE( A, (limbs) * sizeof(mbedtls_mpi_uint), B, (limbs) * sizeof(mbedtls_mpi_uint) )
+
+    /* 1. R = A - b. Result and borrow should be correct */
+    TEST_EQUAL( mbedtls_mpi_core_sub_int( R, A, B[0], limbs ), borrow );
+    TEST_COMPARE_CORE_MPIS( R, X, limbs );
+
+    /* 2. A = A - b. Result and borrow should be correct */
+    TEST_EQUAL( mbedtls_mpi_core_sub_int( A, A, B[0], limbs ), borrow );
+    TEST_COMPARE_CORE_MPIS( A, X, limbs );
+
+exit:
+    mbedtls_free( A );
+    mbedtls_free( B );
+    mbedtls_free( X );
+    mbedtls_free( R );
+}
+/* END_CASE */
+
 /* END MERGE SLOT 3 */
 
 /* BEGIN MERGE SLOT 4 */