diff --git a/CMakeLists.txt b/CMakeLists.txt
index 561498c..46d06c2 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -150,7 +150,7 @@
 find_package(Threads)
 
 # If this is the root project add longer list of available CMAKE_BUILD_TYPE values
-if(CMAKE_SOURCE_DIR STREQUAL CMAKE_CURRENT_SOURCE_DIR)
+if(NOT MBEDTLS_AS_SUBPROJECT)
     set(CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE}
         CACHE STRING "Choose the type of build: None Debug Release Coverage ASan ASanDbg MemSan MemSanDbg Check CheckFull TSan TSanDbg"
         FORCE)
@@ -249,9 +249,15 @@
     # test_suite_pkwrite taking >3h on the CI. Observed with GCC 5.4 on
     # Ubuntu 16.04 x86_64 and GCC 6.5 on Ubuntu 18.04 x86_64.
     # GCC 7.5 and above on Ubuntu 18.04 appear fine.
-    # To avoid the performance problem, we use -O2 here. It doesn't slow
-    # down much even with modern compiler versions.
-    set(CMAKE_C_FLAGS_ASAN        "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O2")
+    # To avoid the performance problem, we use -O2 when GCC version is lower than 7.0.
+    # It doesn't slow down much even with modern compiler versions.
+    if (GCC_VERSION VERSION_LESS 7.0)
+        message(STATUS "USING O2")
+        set(CMAKE_C_FLAGS_ASAN        "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O2")
+    else()
+        message(STATUS "USING O3")
+        set(CMAKE_C_FLAGS_ASAN        "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O3")
+    endif()
     set(CMAKE_C_FLAGS_ASANDBG     "-fsanitize=address -fno-common -fsanitize=undefined -fno-sanitize-recover=all -O1 -g3 -fno-omit-frame-pointer -fno-optimize-sibling-calls")
     set(CMAKE_C_FLAGS_TSAN        "-fsanitize=thread -O3")
     set(CMAKE_C_FLAGS_TSANDBG     "-fsanitize=thread -O1 -g3 -fno-omit-frame-pointer -fno-optimize-sibling-calls")
@@ -318,10 +324,6 @@
     endif(CMAKE_COMPILER_IS_GNU OR CMAKE_COMPILER_IS_CLANG)
 endif(CMAKE_BUILD_TYPE STREQUAL "Coverage")
 
-if(LIB_INSTALL_DIR)
-    set(CMAKE_INSTALL_LIBDIR "${LIB_INSTALL_DIR}")
-endif()
-
 if (NOT EXISTS "${MBEDTLS_FRAMEWORK_DIR}/CMakeLists.txt")
     message(FATAL_ERROR "${MBEDTLS_FRAMEWORK_DIR}/CMakeLists.txt not found. Run `git submodule update --init` from the source tree to fetch the submodule contents.")
 endif()
diff --git a/ChangeLog.d/9302.txt b/ChangeLog.d/9302.txt
new file mode 100644
index 0000000..d61ba19
--- /dev/null
+++ b/ChangeLog.d/9302.txt
@@ -0,0 +1,6 @@
+Features
+   * Added new configuration option MBEDTLS_PSA_STATIC_KEY_SLOTS, which
+     uses static storage for keys, enabling malloc-less use of key slots.
+     The size of each buffer is given by the option
+     MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE. By default it accommodates the
+     largest PSA key enabled in the build.
diff --git a/ChangeLog.d/replace-close-with-mbedtls_net_close.txt b/ChangeLog.d/replace-close-with-mbedtls_net_close.txt
new file mode 100644
index 0000000..213cf55
--- /dev/null
+++ b/ChangeLog.d/replace-close-with-mbedtls_net_close.txt
@@ -0,0 +1,4 @@
+Bugfix
+   * Use 'mbedtls_net_close' instead of 'close' in 'mbedtls_net_bind'
+     and 'mbedtls_net_connect' to prevent possible double close fd
+     problems. Fixes #9711.
diff --git a/framework b/framework
index 311d8ac..d68446c 160000
--- a/framework
+++ b/framework
@@ -1 +1 @@
-Subproject commit 311d8acd1c329d6417db576ba5219973c500d696
+Subproject commit d68446c9da02e536279a7aaa5a3c9850742ba30c
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index 20b0ed6..a710208 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -694,6 +694,11 @@
 #error "MBEDTLS_PSA_INJECT_ENTROPY is not compatible with MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG"
 #endif
 
+#if defined(MBEDTLS_PSA_KEY_STORE_DYNAMIC) &&           \
+    defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+#error "MBEDTLS_PSA_KEY_STORE_DYNAMIC and MBEDTLS_PSA_STATIC_KEY_SLOTS cannot be defined simultaneously"
+#endif
+
 #if defined(MBEDTLS_PSA_ITS_FILE_C) && \
     !defined(MBEDTLS_FS_IO)
 #error "MBEDTLS_PSA_ITS_FILE_C defined, but not all prerequisites"
diff --git a/include/mbedtls/mbedtls_config.h b/include/mbedtls/mbedtls_config.h
index 80009c0..02dc8fd 100644
--- a/include/mbedtls/mbedtls_config.h
+++ b/include/mbedtls/mbedtls_config.h
@@ -3067,6 +3067,26 @@
 #define MBEDTLS_PSA_ITS_FILE_C
 
 /**
+ * \def MBEDTLS_PSA_STATIC_KEY_SLOTS
+ *
+ * Statically preallocate memory to store keys' material in PSA instead
+ * of allocating it dynamically when required. This allows builds without a
+ * heap, if none of the enabled cryptographic implementations or other features
+ * require it.
+ * This feature affects both volatile and persistent keys which means that
+ * it's not possible to persistently store a key which is larger than
+ * #MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE.
+ *
+ * \note This feature comes with a (potentially) higher RAM usage since:
+ *       - All the key slots are allocated no matter if they are used or not.
+ *       - Each key buffer's length is #MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE bytes.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ */
+//#define MBEDTLS_PSA_STATIC_KEY_SLOTS
+
+/**
  * \def MBEDTLS_RIPEMD160_C
  *
  * Enable the RIPEMD-160 hash algorithm.
@@ -3867,6 +3887,19 @@
  */
 //#define MBEDTLS_PSA_KEY_SLOT_COUNT 32
 
+/**
+ * \def MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+ *
+ * Define the size (in bytes) of each static key buffer when
+ * #MBEDTLS_PSA_STATIC_KEY_SLOTS is set. If not
+ * explicitly defined then it's automatically guessed from available PSA keys
+ * enabled in the build through PSA_WANT_xxx symbols.
+ * If required by the application this parameter can be set to higher values
+ * in order to store larger objects (ex: raw keys), but please note that this
+ * will increase RAM usage.
+ */
+//#define MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE       256
+
 /* RSA OPTIONS */
 //#define MBEDTLS_RSA_GEN_KEY_MIN_BITS            1024 /**<  Minimum RSA key size that can be generated in bits (Minimum possible value is 128 bits) */
 
diff --git a/library/CMakeLists.txt b/library/CMakeLists.txt
index 6af4f0f..0415c65 100644
--- a/library/CMakeLists.txt
+++ b/library/CMakeLists.txt
@@ -1,10 +1,3 @@
-# Set the project root directory if it's not already defined, as may happen if
-# the library folder is included directly by a parent project, without
-# including the top level CMakeLists.txt.
-if(NOT DEFINED MBEDTLS_DIR)
-    set(MBEDTLS_DIR ${CMAKE_SOURCE_DIR})
-endif()
-
 set(src_x509
     error.c
     pkcs7.c
diff --git a/library/net_sockets.c b/library/net_sockets.c
index 33616bc..f752d13 100644
--- a/library/net_sockets.c
+++ b/library/net_sockets.c
@@ -190,7 +190,7 @@
             break;
         }
 
-        close(ctx->fd);
+        mbedtls_net_close(ctx);
         ret = MBEDTLS_ERR_NET_CONNECT_FAILED;
     }
 
@@ -237,13 +237,13 @@
         n = 1;
         if (setsockopt(ctx->fd, SOL_SOCKET, SO_REUSEADDR,
                        (const char *) &n, sizeof(n)) != 0) {
-            close(ctx->fd);
+            mbedtls_net_close(ctx);
             ret = MBEDTLS_ERR_NET_SOCKET_FAILED;
             continue;
         }
 
         if (bind(ctx->fd, cur->ai_addr, MSVC_INT_CAST cur->ai_addrlen) != 0) {
-            close(ctx->fd);
+            mbedtls_net_close(ctx);
             ret = MBEDTLS_ERR_NET_BIND_FAILED;
             continue;
         }
@@ -251,7 +251,7 @@
         /* Listen only makes sense for TCP */
         if (proto == MBEDTLS_NET_PROTO_TCP) {
             if (listen(ctx->fd, MBEDTLS_NET_LISTEN_BACKLOG) != 0) {
-                close(ctx->fd);
+                mbedtls_net_close(ctx);
                 ret = MBEDTLS_ERR_NET_LISTEN_FAILED;
                 continue;
             }
diff --git a/scripts/config.py b/scripts/config.py
index 0641a23..69ee3ef 100755
--- a/scripts/config.py
+++ b/scripts/config.py
@@ -110,6 +110,8 @@
     'MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN', # build dependency (clang+memsan)
     'MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND', # build dependency (valgrind headers)
     'MBEDTLS_X509_REMOVE_INFO', # removes a feature
+    'MBEDTLS_PSA_STATIC_KEY_SLOTS', # only relevant for embedded devices
+    'MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE', # only relevant for embedded devices
     *PSA_UNSUPPORTED_FEATURE,
     *PSA_DEPRECATED_FEATURE,
     *PSA_UNSTABLE_FEATURE
diff --git a/scripts/lcov.sh b/scripts/lcov.sh
index 2d2f42b..79c5c9f 100755
--- a/scripts/lcov.sh
+++ b/scripts/lcov.sh
@@ -51,8 +51,8 @@
     # Ubuntu 16.04 is affected, 18.04 and above are not.
     # https://github.com/linux-test-project/lcov/commit/632c25a0d1f5e4d2f4fd5b28ce7c8b86d388c91f
     COVTMP=$PWD/Coverage/tmp
-    lcov --capture --initial --directory $library_dir -o "$COVTMP/files.info"
-    lcov --rc lcov_branch_coverage=1 --capture --directory $library_dir -o "$COVTMP/tests.info"
+    lcov --capture --initial ${lcov_dirs} -o "$COVTMP/files.info"
+    lcov --rc lcov_branch_coverage=1 --capture ${lcov_dirs} -o "$COVTMP/tests.info"
     lcov --rc lcov_branch_coverage=1 --add-tracefile "$COVTMP/files.info" --add-tracefile "$COVTMP/tests.info" -o "$COVTMP/all.info"
     lcov --rc lcov_branch_coverage=1 --remove "$COVTMP/all.info" -o "$COVTMP/final.info" '*.h'
     gendesc tests/Descriptions.txt -o "$COVTMP/descriptions"
@@ -64,9 +64,13 @@
 # Reset the traces to 0.
 lcov_reset_traces () {
     # Location with plain make
-    rm -f $library_dir/*.gcda
+    for dir in ${library_dirs}; do
+        rm -f ${dir}/*.gcda
+    done
     # Location with CMake
-    rm -f $library_dir/CMakeFiles/*.dir/*.gcda
+    for dir in ${library_dirs}; do
+        rm -f ${dir}/CMakeFiles/*.dir/*.gcda
+    done
 }
 
 if [ $# -gt 0 ] && [ "$1" = "--help" ]; then
@@ -75,13 +79,18 @@
 fi
 
 if in_mbedtls_repo; then
-    library_dir='library'
+    library_dirs='library tf-psa-crypto/core tf-psa-crypto/drivers/builtin'
     title='Mbed TLS'
 else
-    library_dir='core'
+    library_dirs='core drivers/builtin'
     title='TF-PSA-Crypto'
 fi
 
+lcov_dirs=""
+for dir in ${library_dirs}; do
+    lcov_dirs="${lcov_dirs} --directory ${dir}"
+done
+
 main=lcov_library_report
 while getopts r OPTLET; do
     case $OPTLET in
diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt
index 4e90bff..a9d5c84 100644
--- a/tests/CMakeLists.txt
+++ b/tests/CMakeLists.txt
@@ -3,13 +3,6 @@
     ${CMAKE_THREAD_LIBS_INIT}
 )
 
-# Set the project root directory if it's not already defined, as may happen if
-# the tests folder is included directly by a parent project, without including
-# the top level CMakeLists.txt.
-if(NOT DEFINED MBEDTLS_DIR)
-    set(MBEDTLS_DIR ${CMAKE_SOURCE_DIR})
-endif()
-
 if(NOT MBEDTLS_PYTHON_EXECUTABLE)
     message(FATAL_ERROR "Cannot build test suites without Python 3")
 endif()
diff --git a/tests/include/test/psa_crypto_helpers.h b/tests/include/test/psa_crypto_helpers.h
index 30f2e0f..a54e125 100644
--- a/tests/include/test/psa_crypto_helpers.h
+++ b/tests/include/test/psa_crypto_helpers.h
@@ -461,4 +461,43 @@
 #define MBEDTLS_TEST_PSA_INTERNAL_KEYS          \
     MBEDTLS_TEST_PSA_INTERNAL_KEYS_FOR_DRBG
 
+/* A couple of helper macros to verify if MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE is
+ * large enough to contain an RSA key pair of the given size. This is meant to be
+ * used in test cases where MBEDTLS_PSA_STATIC_KEY_SLOTS is enabled. */
+#if defined(MBEDTLS_PSA_CRYPTO_CLIENT)
+
+#if (MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE >= PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(4096))
+#define MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_4096
+#endif
+
+#if (MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE >= PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(2048))
+#define MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_2048
+#endif
+
+#endif /* MBEDTLS_PSA_CRYPTO_CLIENT */
+
+/* Helper macro to get the size of the each key slot buffer. */
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+#define MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE     MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+#else
+#define MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE     SIZE_MAX
+#endif
+
+/* Helper macro for the PK module to check whether MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+ * is large enough to contain 4096-bit RSA key pairs. Of course this check is only
+ * necessary if PK relies on PSA (i.e. MBEDTLS_USE_PSA_CRYPTO) to store and manage
+ * the key. */
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+
+#if !defined(MBEDTLS_PSA_STATIC_KEY_SLOTS) || \
+    defined(MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_4096)
+#define MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
+#endif
+
+#else /* MBEDTLS_USE_PSA_CRYPTO */
+
+#define MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
+
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
+
 #endif /* PSA_CRYPTO_HELPERS_H */
diff --git a/tests/opt-testcases/tls13-misc.sh b/tests/opt-testcases/tls13-misc.sh
index 2bd47d5..cc6a31d 100644
--- a/tests/opt-testcases/tls13-misc.sh
+++ b/tests/opt-testcases/tls13-misc.sh
@@ -922,6 +922,7 @@
 # ephemeral then ticket based scenario we use for early data testing the first
 # handshake fails. The following skipped test is here to illustrate the kind
 # of testing we would like to do.
+# https://github.com/Mbed-TLS/mbedtls/issues/9582
 skip_next_test
 requires_openssl_tls1_3_with_compatible_ephemeral
 requires_config_enabled MBEDTLS_SSL_CLI_C
diff --git a/tests/scripts/all-core.sh b/tests/scripts/all-core.sh
new file mode 100644
index 0000000..ccd7e59
--- /dev/null
+++ b/tests/scripts/all-core.sh
@@ -0,0 +1,1023 @@
+# all-core.sh
+#
+# Copyright The Mbed TLS Contributors
+# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+
+################################################################
+#### Documentation
+################################################################
+
+# Purpose
+# -------
+#
+# To run all tests possible or available on the platform.
+#
+# Files structure
+# ---------------
+#
+# The executable entry point for users and the CI is tests/scripts/all.sh.
+#
+# The actual content is in the following files:
+# - all-core.sh contains the core logic for running test components,
+#   processing command line options, reporting results, etc.
+# - all-helpers.sh contains helper functions used by more than 1 component.
+# - components-*.sh contain the definitions of the various components.
+#
+# The first two parts are shared between repos and branches;
+# the component files are repo&branch-specific.
+#
+# The files all-*.sh and components-*.sh should only define functions and not
+# run code when sourced; the only exception being that all-core.sh runs
+# 'shopt' because that is necessary for the rest of the file to parse.
+#
+# Notes for users
+# ---------------
+#
+# Warning: the test is destructive. It includes various build modes and
+# configurations, and can and will arbitrarily change the current CMake
+# configuration. The following files must be committed into git:
+#    * include/mbedtls/mbedtls_config.h
+#    * Makefile, library/Makefile, programs/Makefile, tests/Makefile,
+#      programs/fuzz/Makefile
+# After running this script, the CMake cache will be lost and CMake
+# will no longer be initialised.
+#
+# The script assumes the presence of a number of tools:
+#   * Basic Unix tools (Windows users note: a Unix-style find must be before
+#     the Windows find in the PATH)
+#   * Perl
+#   * GNU Make
+#   * CMake
+#   * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind)
+#   * G++
+#   * arm-gcc and mingw-gcc
+#   * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc
+#   * OpenSSL and GnuTLS command line tools, in suitable versions for the
+#     interoperability tests. The following are the official versions at the
+#     time of writing:
+#     * GNUTLS_{CLI,SERV} = 3.4.10
+#     * GNUTLS_NEXT_{CLI,SERV} = 3.7.2
+#     * OPENSSL = 1.0.2g (without Debian/Ubuntu patches)
+#     * OPENSSL_NEXT = 3.1.2
+# See the invocation of check_tools below for details.
+#
+# This script must be invoked from the toplevel directory of a git
+# working copy of Mbed TLS.
+#
+# The behavior on an error depends on whether --keep-going (alias -k)
+# is in effect.
+#  * Without --keep-going: the script stops on the first error without
+#    cleaning up. This lets you work in the configuration of the failing
+#    component.
+#  * With --keep-going: the script runs all requested components and
+#    reports failures at the end. In particular the script always cleans
+#    up on exit.
+#
+# Note that the output is not saved. You may want to run
+#   script -c tests/scripts/all.sh
+# or
+#   tests/scripts/all.sh >all.log 2>&1
+#
+# Notes for maintainers
+# ---------------------
+#
+# The bulk of the code is organized into functions that follow one of the
+# following naming conventions:
+# * in all-core.sh:
+#   * pre_XXX: things to do before running the tests, in order.
+#   * post_XXX: things to do after running the tests.
+# * in components-*.sh:
+#   * component_XXX: independent components. They can be run in any order.
+#     * component_check_XXX: quick tests that aren't worth parallelizing.
+#     * component_build_XXX: build things but don't run them.
+#     * component_test_XXX: build and test.
+#     * component_release_XXX: tests that the CI should skip during PR testing.
+#   * support_XXX: if support_XXX exists and returns false then
+#     component_XXX is not run by default.
+# * in various files:
+#   * other: miscellaneous support functions.
+#
+# Each component must start by invoking `msg` with a short informative message.
+#
+# Warning: due to the way bash detects errors, the failure of a command
+# inside 'if' or '!' is not detected. Use the 'not' function instead of '!'.
+#
+# Each component is executed in a separate shell process. The component
+# fails if any command in it returns a non-zero status.
+#
+# The framework performs some cleanup tasks after each component. This
+# means that components can assume that the working directory is in a
+# cleaned-up state, and don't need to perform the cleanup themselves.
+# * Run `make clean`.
+# * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running
+#   the component.
+# * Check out `Makefile`, `library/Makefile`, `programs/Makefile`,
+#   `tests/Makefile` and `programs/fuzz/Makefile` from git.
+#   This cleans up after an in-tree use of CMake.
+
+
+################################################################
+#### Initialization and command line parsing
+################################################################
+
+# Enable ksh/bash extended file matching patterns.
+# Must come before function definitions or some of them wouldn't parse.
+shopt -s extglob
+
+pre_set_shell_options () {
+    # Abort on errors (even on the left-hand side of a pipe).
+    # Treat uninitialised variables as errors.
+    set -e -o pipefail -u
+}
+
+# For project detection
+in_mbedtls_repo () {
+    test "$PROJECT_NAME" = "Mbed TLS"
+}
+
+in_tf_psa_crypto_repo () {
+    test "$PROJECT_NAME" = "TF-PSA-Crypto"
+}
+
+pre_check_environment () {
+    # For project detection
+    PROJECT_NAME_FILE='./scripts/project_name.txt'
+    if read -r PROJECT_NAME < "$PROJECT_NAME_FILE"; then :; else
+        echo "$PROJECT_NAME_FILE does not exist... Exiting..." >&2
+        exit 1
+    fi
+
+    if in_mbedtls_repo || in_tf_psa_crypto_repo; then :; else
+        echo "Must be run from Mbed TLS / TF-PSA-Crypto root" >&2
+        exit 1
+    fi
+}
+
+# Must be called before pre_initialize_variables which sets ALL_COMPONENTS.
+pre_load_components () {
+    # Include the components from components.sh
+    test_script_dir="${0%/*}"
+    for file in "$test_script_dir"/components-*.sh; do
+        source $file
+    done
+}
+
+pre_initialize_variables () {
+    if in_mbedtls_repo; then
+        CONFIG_H='include/mbedtls/mbedtls_config.h'
+        if [ -d tf-psa-crypto ]; then
+            CRYPTO_CONFIG_H='tf-psa-crypto/include/psa/crypto_config.h'
+            PSA_CORE_PATH='tf-psa-crypto/core'
+            BUILTIN_SRC_PATH='tf-psa-crypto/drivers/builtin/src'
+        else
+            CRYPTO_CONFIG_H='include/psa/crypto_config.h'
+            # helper_armc6_build_test() relies on these being defined,
+            # but empty if the paths don't exist (as in 3.6).
+            PSA_CORE_PATH=''
+            BUILTIN_SRC_PATH=''
+        fi
+    else
+        CONFIG_H='drivers/builtin/include/mbedtls/mbedtls_config.h'
+        CRYPTO_CONFIG_H='include/psa/crypto_config.h'
+        PSA_CORE_PATH='core'
+        BUILTIN_SRC_PATH='drivers/builtin/src'
+    fi
+    CONFIG_TEST_DRIVER_H='tests/include/test/drivers/config_test_driver.h'
+
+    # Files that are clobbered by some jobs will be backed up. Use a different
+    # suffix from auxiliary scripts so that all.sh and auxiliary scripts can
+    # independently decide when to remove the backup file.
+    backup_suffix='.all.bak'
+    # Files clobbered by config.py
+    files_to_back_up="$CONFIG_H $CRYPTO_CONFIG_H $CONFIG_TEST_DRIVER_H"
+    if in_mbedtls_repo; then
+        # Files clobbered by in-tree cmake
+        files_to_back_up="$files_to_back_up Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile"
+    fi
+
+    append_outcome=0
+    MEMORY=0
+    FORCE=0
+    QUIET=0
+    KEEP_GOING=0
+
+    # Seed value used with the --release-test option.
+    #
+    # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if
+    # both values are kept in sync. If you change the value here because it
+    # breaks some tests, you'll definitely want to change it in
+    # basic-build-test.sh as well.
+    RELEASE_SEED=1
+
+    # Specify character collation for regular expressions and sorting with C locale
+    export LC_COLLATE=C
+
+    : ${MBEDTLS_TEST_OUTCOME_FILE=}
+    : ${MBEDTLS_TEST_PLATFORM="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"}
+    export MBEDTLS_TEST_OUTCOME_FILE
+    export MBEDTLS_TEST_PLATFORM
+
+    # Default commands, can be overridden by the environment
+    : ${OPENSSL:="openssl"}
+    : ${OPENSSL_NEXT:="$OPENSSL"}
+    : ${GNUTLS_CLI:="gnutls-cli"}
+    : ${GNUTLS_SERV:="gnutls-serv"}
+    : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build}
+    : ${ARMC5_BIN_DIR:=/usr/bin}
+    : ${ARMC6_BIN_DIR:=/usr/bin}
+    : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-}
+    : ${ARM_LINUX_GNUEABI_GCC_PREFIX:=arm-linux-gnueabi-}
+    : ${CLANG_LATEST:="clang-latest"}
+    : ${CLANG_EARLIEST:="clang-earliest"}
+    : ${GCC_LATEST:="gcc-latest"}
+    : ${GCC_EARLIEST:="gcc-earliest"}
+    # if MAKEFLAGS is not set add the -j option to speed up invocations of make
+    if [ -z "${MAKEFLAGS+set}" ]; then
+        export MAKEFLAGS="-j$(all_sh_nproc)"
+    fi
+    # if CC is not set, use clang by default (if present) to improve build times
+    if [ -z "${CC+set}" ] && (type clang > /dev/null 2>&1); then
+        export CC="clang"
+    fi
+
+    if [ -n "${OPENSSL_3+set}" ]; then
+        export OPENSSL_NEXT="$OPENSSL_3"
+    fi
+
+    # Include more verbose output for failing tests run by CMake or make
+    export CTEST_OUTPUT_ON_FAILURE=1
+
+    # CFLAGS and LDFLAGS for Asan builds that don't use CMake
+    # default to -O2, use -Ox _after_ this if you want another level
+    ASAN_CFLAGS='-O2 -Werror -fsanitize=address,undefined -fno-sanitize-recover=all'
+    # Normally, tests should use this compiler for ASAN testing
+    ASAN_CC=clang
+
+    # Platform tests have an allocation that returns null
+    export ASAN_OPTIONS="allocator_may_return_null=1"
+    export MSAN_OPTIONS="allocator_may_return_null=1"
+
+    # Gather the list of available components. These are the functions
+    # defined in this script whose name starts with "component_".
+    ALL_COMPONENTS=$(compgen -A function component_ | sed 's/component_//')
+
+    PSASIM_PATH='tests/psa-client-server/psasim/'
+
+    # Delay determining SUPPORTED_COMPONENTS until the command line options have a chance to override
+    # the commands set by the environment
+}
+
+setup_quiet_wrappers()
+{
+    # Pick up "quiet" wrappers for make and cmake, which don't output very much
+    # unless there is an error. This reduces logging overhead in the CI.
+    #
+    # Note that the cmake wrapper breaks unless we use an absolute path here.
+    if [[ -e ${PWD}/tests/scripts/quiet ]]; then
+        export PATH=${PWD}/tests/scripts/quiet:$PATH
+    fi
+}
+
+# Test whether the component $1 is included in the command line patterns.
+is_component_included()
+{
+    # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
+    # only does word splitting.
+    set -f
+    for pattern in $COMMAND_LINE_COMPONENTS; do
+        set +f
+        case ${1#component_} in $pattern) return 0;; esac
+    done
+    set +f
+    return 1
+}
+
+usage()
+{
+    cat <<EOF
+Usage: $0 [OPTION]... [COMPONENT]...
+Run mbedtls release validation tests.
+By default, run all tests. With one or more COMPONENT, run only those.
+COMPONENT can be the name of a component or a shell wildcard pattern.
+
+Examples:
+  $0 "check_*"
+    Run all sanity checks.
+  $0 --no-armcc --except test_memsan
+    Run everything except builds that require armcc and MemSan.
+
+Special options:
+  -h|--help             Print this help and exit.
+  --list-all-components List all available test components and exit.
+  --list-components     List components supported on this platform and exit.
+
+General options:
+  -q|--quiet            Only output component names, and errors if any.
+  -f|--force            Force the tests to overwrite any modified files.
+  -k|--keep-going       Run all tests and report errors at the end.
+  -m|--memory           Additional optional memory tests.
+     --append-outcome   Append to the outcome file (if used).
+     --arm-none-eabi-gcc-prefix=<string>
+                        Prefix for a cross-compiler for arm-none-eabi
+                        (default: "${ARM_NONE_EABI_GCC_PREFIX}")
+     --arm-linux-gnueabi-gcc-prefix=<string>
+                        Prefix for a cross-compiler for arm-linux-gnueabi
+                        (default: "${ARM_LINUX_GNUEABI_GCC_PREFIX}")
+     --armcc            Run ARM Compiler builds (on by default).
+     --restore          First clean up the build tree, restoring backed up
+                        files. Do not run any components unless they are
+                        explicitly specified.
+     --error-test       Error test mode: run a failing function in addition
+                        to any specified component. May be repeated.
+     --except           Exclude the COMPONENTs listed on the command line,
+                        instead of running only those.
+     --no-append-outcome    Write a new outcome file and analyze it (default).
+     --no-armcc         Skip ARM Compiler builds.
+     --no-force         Refuse to overwrite modified files (default).
+     --no-keep-going    Stop at the first error (default).
+     --no-memory        No additional memory tests (default).
+     --no-quiet         Print full output from components.
+     --out-of-source-dir=<path>  Directory used for CMake out-of-source build tests.
+     --outcome-file=<path>  File where test outcomes are written (not done if
+                            empty; default: \$MBEDTLS_TEST_OUTCOME_FILE).
+     --random-seed      Use a random seed value for randomized tests (default).
+  -r|--release-test     Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}.
+  -s|--seed             Integer seed value to use for this test run.
+
+Tool path options:
+     --armc5-bin-dir=<ARMC5_bin_dir_path>       ARM Compiler 5 bin directory.
+     --armc6-bin-dir=<ARMC6_bin_dir_path>       ARM Compiler 6 bin directory.
+     --clang-earliest=<Clang_earliest_path>     Earliest version of clang available
+     --clang-latest=<Clang_latest_path>         Latest version of clang available
+     --gcc-earliest=<GCC_earliest_path>         Earliest version of GCC available
+     --gcc-latest=<GCC_latest_path>             Latest version of GCC available
+     --gnutls-cli=<GnuTLS_cli_path>             GnuTLS client executable to use for most tests.
+     --gnutls-serv=<GnuTLS_serv_path>           GnuTLS server executable to use for most tests.
+     --openssl=<OpenSSL_path>                   OpenSSL executable to use for most tests.
+     --openssl-next=<OpenSSL_path>              OpenSSL executable to use for recent things like ARIA
+EOF
+}
+
+# Cleanup before/after running a component.
+# Remove built files as well as the cmake cache/config.
+# Does not remove generated source files.
+cleanup()
+{
+    if in_mbedtls_repo; then
+        command make clean
+    fi
+
+    # Remove CMake artefacts
+    find . -name .git -prune -o \
+           -iname CMakeFiles -exec rm -rf {} \+ -o \
+           \( -iname cmake_install.cmake -o \
+              -iname CTestTestfile.cmake -o \
+              -iname CMakeCache.txt -o \
+              -path './cmake/*.cmake' \) -exec rm -f {} \+
+    # Remove Makefiles generated by in-tree CMake builds
+    # (Not all files will exist in all branches, but that's OK.)
+    rm -f 3rdparty/Makefile 3rdparty/*/Makefile
+    rm -f pkgconfig/Makefile framework/Makefile
+    rm -f include/Makefile programs/!(fuzz)/Makefile
+    rm -f tf-psa-crypto/Makefile tf-psa-crypto/include/Makefile
+    rm -f tf-psa-crypto/core/Makefile tf-psa-crypto/drivers/Makefile
+    rm -f tf-psa-crypto/tests/Makefile
+    rm -f tf-psa-crypto/drivers/everest/Makefile
+    rm -f tf-psa-crypto/drivers/p256-m/Makefile
+    rm -f tf-psa-crypto/drivers/builtin/Makefile
+    rm -f tf-psa-crypto/drivers/builtin/src/Makefile
+
+    # Remove any artifacts from the component_test_cmake_as_subdirectory test.
+    rm -rf programs/test/cmake_subproject/build
+    rm -f programs/test/cmake_subproject/Makefile
+    rm -f programs/test/cmake_subproject/cmake_subproject
+
+    # Remove any artifacts from the component_test_cmake_as_package test.
+    rm -rf programs/test/cmake_package/build
+    rm -f programs/test/cmake_package/Makefile
+    rm -f programs/test/cmake_package/cmake_package
+
+    # Remove any artifacts from the component_test_cmake_as_installed_package test.
+    rm -rf programs/test/cmake_package_install/build
+    rm -f programs/test/cmake_package_install/Makefile
+    rm -f programs/test/cmake_package_install/cmake_package_install
+
+    # Restore files that may have been clobbered by the job
+    restore_backed_up_files
+}
+
+# Restore files that may have been clobbered
+restore_backed_up_files () {
+    for x in $files_to_back_up; do
+        if [[ -e "$x$backup_suffix" ]]; then
+            cp -p "$x$backup_suffix" "$x"
+        fi
+    done
+}
+
+# Final cleanup when this script exits (except when exiting on a failure
+# in non-keep-going mode).
+final_cleanup () {
+    cleanup
+
+    for x in $files_to_back_up; do
+        rm -f "$x$backup_suffix"
+    done
+}
+
+# Executed on exit. May be redefined depending on command line options.
+final_report () {
+    :
+}
+
+fatal_signal () {
+    final_cleanup
+    final_report $1
+    trap - $1
+    kill -$1 $$
+}
+
+pre_set_signal_handlers () {
+    trap 'fatal_signal HUP' HUP
+    trap 'fatal_signal INT' INT
+    trap 'fatal_signal TERM' TERM
+}
+
+# Number of processors on this machine. Used as the default setting
+# for parallel make.
+all_sh_nproc ()
+{
+    {
+        nproc || # Linux
+        sysctl -n hw.ncpuonline || # NetBSD, OpenBSD
+        sysctl -n hw.ncpu || # FreeBSD
+        echo 1
+    } 2>/dev/null
+}
+
+msg()
+{
+    if [ -n "${current_component:-}" ]; then
+        current_section="${current_component#component_}: $1"
+    else
+        current_section="$1"
+    fi
+
+    if [ $QUIET -eq 1 ]; then
+        return
+    fi
+
+    echo ""
+    echo "******************************************************************"
+    echo "* $current_section "
+    printf "* "; date
+    echo "******************************************************************"
+}
+
+err_msg()
+{
+    echo "$1" >&2
+}
+
+check_tools()
+{
+    for tool in "$@"; do
+        if ! `type "$tool" >/dev/null 2>&1`; then
+            err_msg "$tool not found!"
+            exit 1
+        fi
+    done
+}
+
+pre_parse_command_line () {
+    COMMAND_LINE_COMPONENTS=
+    all_except=0
+    error_test=0
+    list_components=0
+    restore_first=0
+    no_armcc=
+
+    # Note that legacy options are ignored instead of being omitted from this
+    # list of options, so invocations that worked with previous version of
+    # all.sh will still run and work properly.
+    while [ $# -gt 0 ]; do
+        case "$1" in
+            --append-outcome) append_outcome=1;;
+            --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";;
+            --arm-linux-gnueabi-gcc-prefix) shift; ARM_LINUX_GNUEABI_GCC_PREFIX="$1";;
+            --armcc) no_armcc=;;
+            --armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";;
+            --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";;
+            --clang-earliest) shift; CLANG_EARLIEST="$1";;
+            --clang-latest) shift; CLANG_LATEST="$1";;
+            --error-test) error_test=$((error_test + 1));;
+            --except) all_except=1;;
+            --force|-f) FORCE=1;;
+            --gcc-earliest) shift; GCC_EARLIEST="$1";;
+            --gcc-latest) shift; GCC_LATEST="$1";;
+            --gnutls-cli) shift; GNUTLS_CLI="$1";;
+            --gnutls-legacy-cli) shift;; # ignored for backward compatibility
+            --gnutls-legacy-serv) shift;; # ignored for backward compatibility
+            --gnutls-serv) shift; GNUTLS_SERV="$1";;
+            --help|-h) usage; exit;;
+            --keep-going|-k) KEEP_GOING=1;;
+            --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;;
+            --list-components) list_components=1;;
+            --memory|-m) MEMORY=1;;
+            --no-append-outcome) append_outcome=0;;
+            --no-armcc) no_armcc=1;;
+            --no-force) FORCE=0;;
+            --no-keep-going) KEEP_GOING=0;;
+            --no-memory) MEMORY=0;;
+            --no-quiet) QUIET=0;;
+            --openssl) shift; OPENSSL="$1";;
+            --openssl-next) shift; OPENSSL_NEXT="$1";;
+            --outcome-file) shift; MBEDTLS_TEST_OUTCOME_FILE="$1";;
+            --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";;
+            --quiet|-q) QUIET=1;;
+            --random-seed) unset SEED;;
+            --release-test|-r) SEED=$RELEASE_SEED;;
+            --restore) restore_first=1;;
+            --seed|-s) shift; SEED="$1";;
+            -*)
+                echo >&2 "Unknown option: $1"
+                echo >&2 "Run $0 --help for usage."
+                exit 120
+                ;;
+            *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";;
+        esac
+        shift
+    done
+
+    # Exclude components that are not supported on this platform.
+    SUPPORTED_COMPONENTS=
+    for component in $ALL_COMPONENTS; do
+        case $(type "support_$component" 2>&1) in
+            *' function'*)
+                if ! support_$component; then continue; fi;;
+        esac
+        SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component"
+    done
+
+    if [ $list_components -eq 1 ]; then
+        printf '%s\n' $SUPPORTED_COMPONENTS
+        exit
+    fi
+
+    # With no list of components, run everything.
+    if [ -z "$COMMAND_LINE_COMPONENTS" ] && [ $restore_first -eq 0 ]; then
+        all_except=1
+    fi
+
+    # --no-armcc is a legacy option. The modern way is --except '*_armcc*'.
+    # Ignore it if components are listed explicitly on the command line.
+    if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then
+        COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*"
+    fi
+
+    # Error out if an explicitly requested component doesn't exist.
+    if [ $all_except -eq 0 ]; then
+        unsupported=0
+        # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
+        # only does word splitting.
+        set -f
+        for component in $COMMAND_LINE_COMPONENTS; do
+            set +f
+            # If the requested name includes a wildcard character, don't
+            # check it. Accept wildcard patterns that don't match anything.
+            case $component in
+                *[*?\[]*) continue;;
+            esac
+            case " $SUPPORTED_COMPONENTS " in
+                *" $component "*) :;;
+                *)
+                    echo >&2 "Component $component was explicitly requested, but is not known or not supported."
+                    unsupported=$((unsupported + 1));;
+            esac
+        done
+        set +f
+        if [ $unsupported -ne 0 ]; then
+            exit 2
+        fi
+    fi
+
+    # Build the list of components to run.
+    RUN_COMPONENTS=
+    for component in $SUPPORTED_COMPONENTS; do
+        if is_component_included "$component"; [ $? -eq $all_except ]; then
+            RUN_COMPONENTS="$RUN_COMPONENTS $component"
+        fi
+    done
+
+    unset all_except
+    unset no_armcc
+}
+
+pre_check_git () {
+    if [ $FORCE -eq 1 ]; then
+        rm -rf "$OUT_OF_SOURCE_DIR"
+        git checkout-index -f -q $CONFIG_H
+        cleanup
+    else
+
+        if [ -d "$OUT_OF_SOURCE_DIR" ]; then
+            echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2
+            echo "You can either delete this directory manually, or force the test by rerunning"
+            echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR"
+            exit 1
+        fi
+
+        if ! git diff --quiet "$CONFIG_H"; then
+            err_msg "Warning - the configuration file '$CONFIG_H' has been edited. "
+            echo "You can either delete or preserve your work, or force the test by rerunning the"
+            echo "script as: $0 --force"
+            exit 1
+        fi
+    fi
+}
+
+pre_restore_files () {
+    # If the makefiles have been generated by a framework such as cmake,
+    # restore them from git. If the makefiles look like modifications from
+    # the ones checked into git, take care not to modify them. Whatever
+    # this function leaves behind is what the script will restore before
+    # each component.
+    case "$(head -n1 Makefile)" in
+        *[Gg]enerated*)
+            git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
+            git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
+            ;;
+    esac
+}
+
+pre_back_up () {
+    for x in $files_to_back_up; do
+        cp -p "$x" "$x$backup_suffix"
+    done
+}
+
+pre_setup_keep_going () {
+    failure_count=0 # Number of failed components
+    last_failure_status=0 # Last failure status in this component
+
+    # See err_trap
+    previous_failure_status=0
+    previous_failed_command=
+    previous_failure_funcall_depth=0
+    unset report_failed_command
+
+    start_red=
+    end_color=
+    if [ -t 1 ]; then
+        case "${TERM:-}" in
+            *color*|cygwin|linux|rxvt*|screen|[Eex]term*)
+                start_red=$(printf '\033[31m')
+                end_color=$(printf '\033[0m')
+                ;;
+        esac
+    fi
+
+    # Keep a summary of failures in a file. We'll print it out at the end.
+    failure_summary_file=$PWD/all-sh-failures-$$.log
+    : >"$failure_summary_file"
+
+    # Whether it makes sense to keep a component going after the specified
+    # command fails (test command) or not (configure or build).
+    # This function normally receives the failing simple command
+    # ($BASH_COMMAND) as an argument, but if $report_failed_command is set,
+    # this is passed instead.
+    # This doesn't have to be 100% accurate: all failures are recorded anyway.
+    # False positives result in running things that can't be expected to
+    # work. False negatives result in things not running after something else
+    # failed even though they might have given useful feedback.
+    can_keep_going_after_failure () {
+        case "$1" in
+            "msg "*) false;;
+            "cd "*) false;;
+            "diff "*) true;;
+            *make*[\ /]tests*) false;; # make tests, make CFLAGS=-I../tests, ...
+            *test*) true;; # make test, tests/stuff, env V=v tests/stuff, ...
+            *make*check*) true;;
+            "grep "*) true;;
+            "[ "*) true;;
+            "! "*) true;;
+            *) false;;
+        esac
+    }
+
+    # This function runs if there is any error in a component.
+    # It must either exit with a nonzero status, or set
+    # last_failure_status to a nonzero value.
+    err_trap () {
+        # Save $? (status of the failing command). This must be the very
+        # first thing, before $? is overridden.
+        last_failure_status=$?
+        failed_command=${report_failed_command-$BASH_COMMAND}
+
+        if [[ $last_failure_status -eq $previous_failure_status &&
+              "$failed_command" == "$previous_failed_command" &&
+              ${#FUNCNAME[@]} == $((previous_failure_funcall_depth - 1)) ]]
+        then
+            # The same command failed twice in a row, but this time one level
+            # less deep in the function call stack. This happens when the last
+            # command of a function returns a nonzero status, and the function
+            # returns that same status. Ignore the second failure.
+            previous_failure_funcall_depth=${#FUNCNAME[@]}
+            return
+        fi
+        previous_failure_status=$last_failure_status
+        previous_failed_command=$failed_command
+        previous_failure_funcall_depth=${#FUNCNAME[@]}
+
+        text="$current_section: $failed_command -> $last_failure_status"
+        echo "${start_red}^^^^$text^^^^${end_color}" >&2
+        echo "$text" >>"$failure_summary_file"
+
+        # If the command is fatal (configure or build command), stop this
+        # component. Otherwise (test command) keep the component running
+        # (run more tests from the same build).
+        if ! can_keep_going_after_failure "$failed_command"; then
+            exit $last_failure_status
+        fi
+    }
+
+    final_report () {
+        if [ $failure_count -gt 0 ]; then
+            echo
+            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+            echo "${start_red}FAILED: $failure_count components${end_color}"
+            cat "$failure_summary_file"
+            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+        elif [ -z "${1-}" ]; then
+            echo "SUCCESS :)"
+        fi
+        if [ -n "${1-}" ]; then
+            echo "Killed by SIG$1."
+        fi
+        rm -f "$failure_summary_file"
+        if [ $failure_count -gt 0 ]; then
+            exit 1
+        fi
+    }
+}
+
+# '! true' does not trigger the ERR trap. Arrange to trigger it, with
+# a reasonably informative error message (not just "$@").
+not () {
+    if "$@"; then
+        report_failed_command="! $*"
+        false
+        unset report_failed_command
+    fi
+}
+
+pre_prepare_outcome_file () {
+    case "$MBEDTLS_TEST_OUTCOME_FILE" in
+      [!/]*) MBEDTLS_TEST_OUTCOME_FILE="$PWD/$MBEDTLS_TEST_OUTCOME_FILE";;
+    esac
+    if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ] && [ "$append_outcome" -eq 0 ]; then
+        rm -f "$MBEDTLS_TEST_OUTCOME_FILE"
+    fi
+}
+
+pre_print_configuration () {
+    if [ $QUIET -eq 1 ]; then
+        return
+    fi
+
+    msg "info: $0 configuration"
+    echo "MEMORY: $MEMORY"
+    echo "FORCE: $FORCE"
+    echo "MBEDTLS_TEST_OUTCOME_FILE: ${MBEDTLS_TEST_OUTCOME_FILE:-(none)}"
+    echo "SEED: ${SEED-"UNSET"}"
+    echo
+    echo "OPENSSL: $OPENSSL"
+    echo "OPENSSL_NEXT: $OPENSSL_NEXT"
+    echo "GNUTLS_CLI: $GNUTLS_CLI"
+    echo "GNUTLS_SERV: $GNUTLS_SERV"
+    echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR"
+    echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR"
+}
+
+# Make sure the tools we need are available.
+pre_check_tools () {
+    # Build the list of variables to pass to output_env.sh.
+    set env
+
+    case " $RUN_COMPONENTS " in
+        # Require OpenSSL and GnuTLS if running any tests (as opposed to
+        # only doing builds). Not all tests run OpenSSL and GnuTLS, but this
+        # is a good enough approximation in practice.
+        *" test_"* | *" release_test_"*)
+            # To avoid setting OpenSSL and GnuTLS for each call to compat.sh
+            # and ssl-opt.sh, we just export the variables they require.
+            export OPENSSL="$OPENSSL"
+            export GNUTLS_CLI="$GNUTLS_CLI"
+            export GNUTLS_SERV="$GNUTLS_SERV"
+            # Avoid passing --seed flag in every call to ssl-opt.sh
+            if [ -n "${SEED-}" ]; then
+                export SEED
+            fi
+            set "$@" OPENSSL="$OPENSSL"
+            set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV"
+            check_tools "$OPENSSL" "$OPENSSL_NEXT" \
+                        "$GNUTLS_CLI" "$GNUTLS_SERV"
+            ;;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_doxygen[_\ ]*) check_tools "doxygen" "dot";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *" test_zeroize "*) check_tools "gdb";;
+    esac
+
+    case " $RUN_COMPONENTS " in
+        *_armcc*)
+            ARMC5_CC="$ARMC5_BIN_DIR/armcc"
+            ARMC5_AR="$ARMC5_BIN_DIR/armar"
+            ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf"
+            ARMC6_CC="$ARMC6_BIN_DIR/armclang"
+            ARMC6_AR="$ARMC6_BIN_DIR/armar"
+            ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf"
+            check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \
+                        "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";;
+    esac
+
+    # past this point, no call to check_tool, only printing output
+    if [ $QUIET -eq 1 ]; then
+        return
+    fi
+
+    msg "info: output_env.sh"
+    case $RUN_COMPONENTS in
+        *_armcc*)
+            set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;;
+        *) set "$@" RUN_ARMCC=0;;
+    esac
+    "$@" scripts/output_env.sh
+}
+
+pre_generate_files() {
+    # since make doesn't have proper dependencies, remove any possibly outdate
+    # file that might be around before generating fresh ones
+    make neat
+    if [ $QUIET -eq 1 ]; then
+        make generated_files >/dev/null
+    else
+        make generated_files
+    fi
+}
+
+pre_load_helpers () {
+    # The path is going to change when this is moved to the framework
+    test_script_dir="${0%/*}"
+    source "$test_script_dir"/all-helpers.sh
+}
+
+################################################################
+#### Termination
+################################################################
+
+post_report () {
+    msg "Done, cleaning up"
+    final_cleanup
+
+    final_report
+}
+
+################################################################
+#### Run all the things
+################################################################
+
+# Function invoked by --error-test to test error reporting.
+pseudo_component_error_test () {
+    msg "Testing error reporting $error_test_i"
+    if [ $KEEP_GOING -ne 0 ]; then
+        echo "Expect three failing commands."
+    fi
+    # If the component doesn't run in a subshell, changing error_test_i to an
+    # invalid integer will cause an error in the loop that runs this function.
+    error_test_i=this_should_not_be_used_since_the_component_runs_in_a_subshell
+    # Expected error: 'grep non_existent /dev/null -> 1'
+    grep non_existent /dev/null
+    # Expected error: '! grep -q . tests/scripts/all.sh -> 1'
+    not grep -q . "$0"
+    # Expected error: 'make unknown_target -> 2'
+    make unknown_target
+    false "this should not be executed"
+}
+
+# Run one component and clean up afterwards.
+run_component () {
+    current_component="$1"
+    export MBEDTLS_TEST_CONFIGURATION="$current_component"
+
+    # Unconditionally create a seedfile that's sufficiently long.
+    # Do this before each component, because a previous component may
+    # have messed it up or shortened it.
+    local dd_cmd
+    dd_cmd=(dd if=/dev/urandom of=./tests/seedfile bs=64 count=1)
+    case $OSTYPE in
+        linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
+    esac
+    "${dd_cmd[@]}"
+
+    if [ -d tf-psa-crypto ]; then
+        dd_cmd=(dd if=/dev/urandom of=./tf-psa-crypto/tests/seedfile bs=64 count=1)
+        case $OSTYPE in
+            linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
+        esac
+        "${dd_cmd[@]}"
+    fi
+
+    # Run the component in a subshell, with error trapping and output
+    # redirection set up based on the relevant options.
+    if [ $KEEP_GOING -eq 1 ]; then
+        # We want to keep running if the subshell fails, so 'set -e' must
+        # be off when the subshell runs.
+        set +e
+    fi
+    (
+        if [ $QUIET -eq 1 ]; then
+            # msg() will be silenced, so just print the component name here.
+            echo "${current_component#component_}"
+            exec >/dev/null
+        fi
+        if [ $KEEP_GOING -eq 1 ]; then
+            # Keep "set -e" off, and run an ERR trap instead to record failures.
+            set -E
+            trap err_trap ERR
+        fi
+        # The next line is what runs the component
+        "$@"
+        if [ $KEEP_GOING -eq 1 ]; then
+            trap - ERR
+            exit $last_failure_status
+        fi
+    )
+    component_status=$?
+    if [ $KEEP_GOING -eq 1 ]; then
+        set -e
+        if [ $component_status -ne 0 ]; then
+            failure_count=$((failure_count + 1))
+        fi
+    fi
+
+    # Restore the build tree to a clean state.
+    cleanup
+    unset current_component
+}
+
+################################################################
+#### Main
+################################################################
+
+main () {
+    # Preliminary setup
+    pre_set_shell_options
+    pre_set_signal_handlers
+    pre_check_environment
+    pre_load_helpers
+    pre_load_components
+    pre_initialize_variables
+    pre_parse_command_line "$@"
+
+    setup_quiet_wrappers
+    pre_check_git
+    pre_restore_files
+    pre_back_up
+
+    build_status=0
+    if [ $KEEP_GOING -eq 1 ]; then
+        pre_setup_keep_going
+    fi
+    pre_prepare_outcome_file
+    pre_print_configuration
+    pre_check_tools
+    cleanup
+    if in_mbedtls_repo; then
+        pre_generate_files
+    fi
+
+    # Run the requested tests.
+    for ((error_test_i=1; error_test_i <= error_test; error_test_i++)); do
+        run_component pseudo_component_error_test
+    done
+    unset error_test_i
+    for component in $RUN_COMPONENTS; do
+        run_component "component_$component"
+    done
+
+    # We're done.
+    post_report
+}
diff --git a/tests/scripts/all-helpers.sh b/tests/scripts/all-helpers.sh
new file mode 100644
index 0000000..0e97f39
--- /dev/null
+++ b/tests/scripts/all-helpers.sh
@@ -0,0 +1,267 @@
+# all-helpers.sh
+#
+# Copyright The Mbed TLS Contributors
+# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+
+# This file contains helpers for test components that are executed by all.sh.
+# See "Files structure" in all-core.sh for other files used by all.sh.
+#
+# This file is the right place for helpers:
+# - that are used by more than one component living in more than one file;
+# - or (inclusive) that we want to share accross repos or branches.
+#
+# Helpers that are used in a single component file that is
+# repo&branch-specific can be defined in the file where they are used.
+
+################################################################
+#### Helpers for components using libtestdriver1
+################################################################
+
+# How to use libtestdriver1
+# -------------------------
+#
+# 1. Define the list algorithms and key types to accelerate,
+#    designated the same way as PSA_WANT_ macros but without PSA_WANT_.
+#    Examples:
+#      - loc_accel_list="ALG_JPAKE"
+#      - loc_accel_list="ALG_FFDH KEY_TYPE_DH_KEY_PAIR KEY_TYPE_DH_PUBLIC_KEY"
+# 2. Make configurations changes for the driver and/or main libraries.
+#    2a. Call helper_libtestdriver1_adjust_config <base>, where the argument
+#        can be either "default" to start with the default config, or a name
+#        supported by scripts/config.py (for example, "full"). This selects
+#        the base to use, and makes common adjustments.
+#    2b. If desired, adjust the PSA_WANT symbols in psa/crypto_config.h.
+#        These changes affect both the driver and the main libraries.
+#        (Note: they need to have the same set of PSA_WANT symbols, as that
+#        determines the ABI between them.)
+#    2c. Adjust MBEDTLS_ symbols in mbedtls_config.h. This only affects the
+#        main libraries. Typically, you want to disable the module(s) that are
+#        being accelerated. You may need to also disable modules that depend
+#        on them or options that are not supported with drivers.
+#    2d. On top of psa/crypto_config.h, the driver library uses its own config
+#        file: tests/include/test/drivers/config_test_driver.h. You usually
+#        don't need to edit it: using loc_extra_list (see below) is preferred.
+#        However, when there's no PSA symbol for what you want to enable,
+#        calling scripts/config.py on this file remains the only option.
+# 3. Build the driver library, then the main libraries, test, and programs.
+#    3a. Call helper_libtestdriver1_make_drivers "$loc_accel_list". You may
+#        need to enable more algorithms here, typically hash algorithms when
+#        accelerating some signature algorithms (ECDSA, RSAv2). This is done
+#        by passing a 2nd argument listing the extra algorithms.
+#        Example:
+#          loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512"
+#          helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+#    3b. Call helper_libtestdriver1_make_main "$loc_accel_list". Any
+#        additional arguments will be passed to make: this can be useful if
+#        you don't want to build everything when iterating during development.
+#        Example:
+#          helper_libtestdriver1_make_main "$loc_accel_list" -C tests test_suite_foo
+# 4. Run the tests you want.
+
+# Adjust the configuration - for both libtestdriver1 and main library,
+# as they should have the same PSA_WANT macros.
+helper_libtestdriver1_adjust_config() {
+    base_config=$1
+    # Select the base configuration
+    if [ "$base_config" != "default" ]; then
+        scripts/config.py "$base_config"
+    fi
+
+    # Enable PSA-based config (necessary to use drivers)
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+
+    # Dynamic secure element support is a deprecated feature and needs to be disabled here.
+    # This is done to have the same form of psa_key_attributes_s for libdriver and library.
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+
+    # If threading is enabled on the normal build, then we need to enable it in the drivers as well,
+    # otherwise we will end up running multithreaded tests without mutexes to protect them.
+    if scripts/config.py get MBEDTLS_THREADING_C; then
+        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_C
+    fi
+
+    if scripts/config.py get MBEDTLS_THREADING_PTHREAD; then
+        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_PTHREAD
+    fi
+}
+
+# Build the drivers library libtestdriver1.a (with ASan).
+#
+# Parameters:
+# 1. a space-separated list of things to accelerate;
+# 2. optional: a space-separate list of things to also support.
+# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
+helper_libtestdriver1_make_drivers() {
+    loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
+    make CC=$ASAN_CC -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# Build the main libraries, programs and tests,
+# linking to the drivers library (with ASan).
+#
+# Parameters:
+# 1. a space-separated list of things to accelerate;
+# *. remaining arguments if any are passed directly to make
+#    (examples: lib, -C tests test_suite_xxx, etc.)
+# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
+helper_libtestdriver1_make_main() {
+    loc_accel_list=$1
+    shift
+
+    # we need flags both with and without the LIBTESTDRIVER1_ prefix
+    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
+    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
+}
+
+################################################################
+#### Helpers for components using psasim
+################################################################
+
+# Set some default values $CONFIG_H in order to build server or client sides
+# in PSASIM. There is only 1 mandatory parameter:
+# - $1: target which can be "client" or "server"
+helper_psasim_config() {
+    TARGET=$1
+
+    if [ "$TARGET" == "client" ]; then
+        scripts/config.py full
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
+        # Dynamic secure element support is a deprecated feature and it is not
+        # available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled.
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+        # Disable potentially problematic features
+        scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+        scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+    else
+        scripts/config.py crypto_full
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
+        # We need to match the client with MBEDTLS_PSA_CRYPTO_SE_C
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+        # Also ensure MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER not set (to match client)
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+    fi
+}
+
+# This is a helper function to be used in psasim builds. It is meant to clean
+# up the library's workspace after the server build and before the client
+# build. Built libraries (mbedcrypto, mbedx509 and mbedtls) are supposed to be
+# already copied to psasim folder at this point.
+helper_psasim_cleanup_before_client() {
+    # Clean up library files
+    make -C library clean
+
+    # Restore files that were backup before building library files. This
+    # includes $CONFIG_H and $CRYPTO_CONFIG_H.
+    restore_backed_up_files
+}
+
+# Helper to build the libraries for client/server in PSASIM. If the server is
+# being built, then it builds also the final executable.
+# There is only 1 mandatory parameter:
+# - $1: target which can be "client" or "server"
+helper_psasim_build() {
+    TARGET=$1
+    shift
+    TARGET_LIB=${TARGET}_libs
+
+    make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" $TARGET_LIB "$@"
+
+    # Build also the server application after its libraries have been built.
+    if [ "$TARGET" == "server" ]; then
+        make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test/psa_server
+    fi
+}
+
+################################################################
+#### Configuration helpers
+################################################################
+
+# When called with no parameter this function disables all builtin curves.
+# The function optionally accepts 1 parameter: a space-separated list of the
+# curves that should be kept enabled.
+helper_disable_builtin_curves() {
+    allowed_list="${1:-}"
+    scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
+
+    for curve in $allowed_list; do
+        scripts/config.py set $curve
+    done
+}
+
+# Helper returning the list of supported elliptic curves from CRYPTO_CONFIG_H,
+# without the "PSA_WANT_" prefix. This becomes handy for accelerating curves
+# in the following helpers.
+helper_get_psa_curve_list () {
+    loc_list=""
+    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
+        loc_list="$loc_list $item"
+    done
+
+    echo "$loc_list"
+}
+
+# Helper returning the list of supported DH groups from CRYPTO_CONFIG_H,
+# without the "PSA_WANT_" prefix. This becomes handy for accelerating DH groups
+# in the following helpers.
+helper_get_psa_dh_group_list () {
+    loc_list=""
+    for item in $(sed -n 's/^#define PSA_WANT_\(DH_RFC7919_[0-9]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
+        loc_list="$loc_list $item"
+    done
+
+    echo "$loc_list"
+}
+
+# Get the list of uncommented PSA_WANT_KEY_TYPE_xxx_ from CRYPTO_CONFIG_H. This
+# is useful to easily get a list of key type symbols to accelerate.
+# The function accepts a single argument which is the key type: ECC, DH, RSA.
+helper_get_psa_key_type_list() {
+    key_type="$1"
+    loc_list=""
+    for item in $(sed -n "s/^#define PSA_WANT_\(KEY_TYPE_${key_type}_[0-9A-Z_a-z]*\).*/\1/p" <"$CRYPTO_CONFIG_H"); do
+        # Skip DERIVE for elliptic keys since there is no driver dispatch for
+        # it so it cannot be accelerated.
+        if [ "$item" != "KEY_TYPE_ECC_KEY_PAIR_DERIVE" ]; then
+            loc_list="$loc_list $item"
+        fi
+    done
+
+    echo "$loc_list"
+}
+
+################################################################
+#### Misc. helpers for components
+################################################################
+
+helper_armc6_build_test()
+{
+    FLAGS="$1"
+
+    msg "build: ARM Compiler 6 ($FLAGS)"
+    make clean
+    ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \
+                    WARNING_CFLAGS='-Werror -xc -std=c99' make lib
+
+    msg "size: ARM Compiler 6 ($FLAGS)"
+    "$ARMC6_FROMELF" -z library/*.o
+    if [ -n "${PSA_CORE_PATH}" ]; then
+        "$ARMC6_FROMELF" -z ${PSA_CORE_PATH}/*.o
+    fi
+    if [ -n "${BUILTIN_SRC_PATH}" ]; then
+        "$ARMC6_FROMELF" -z ${BUILTIN_SRC_PATH}/*.o
+    fi
+}
+
+clang_version() {
+    if command -v clang > /dev/null ; then
+        clang --version|grep version|sed -E 's#.*version ([0-9]+).*#\1#'
+    else
+        echo 0  # report version 0 for "no clang"
+    fi
+}
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index db8d637..6708de1 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -5,1231 +5,11 @@
 # Copyright The Mbed TLS Contributors
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 
+# This file is executable; it is the entry point for users and the CI.
+# See "Files structure" in all-core.sh for other files used.
 
-
-################################################################
-#### Documentation
-################################################################
-
-# Purpose
-# -------
-#
-# To run all tests possible or available on the platform.
-#
-# Notes for users
-# ---------------
-#
-# Warning: the test is destructive. It includes various build modes and
-# configurations, and can and will arbitrarily change the current CMake
-# configuration. The following files must be committed into git:
-#    * include/mbedtls/mbedtls_config.h
-#    * Makefile, library/Makefile, programs/Makefile, tests/Makefile,
-#      programs/fuzz/Makefile
-# After running this script, the CMake cache will be lost and CMake
-# will no longer be initialised.
-#
-# The script assumes the presence of a number of tools:
-#   * Basic Unix tools (Windows users note: a Unix-style find must be before
-#     the Windows find in the PATH)
-#   * Perl
-#   * GNU Make
-#   * CMake
-#   * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind)
-#   * G++
-#   * arm-gcc and mingw-gcc
-#   * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc
-#   * OpenSSL and GnuTLS command line tools, in suitable versions for the
-#     interoperability tests. The following are the official versions at the
-#     time of writing:
-#     * GNUTLS_{CLI,SERV} = 3.4.10
-#     * GNUTLS_NEXT_{CLI,SERV} = 3.7.2
-#     * OPENSSL = 1.0.2g (without Debian/Ubuntu patches)
-#     * OPENSSL_NEXT = 3.1.2
-# See the invocation of check_tools below for details.
-#
-# This script must be invoked from the toplevel directory of a git
-# working copy of Mbed TLS.
-#
-# The behavior on an error depends on whether --keep-going (alias -k)
-# is in effect.
-#  * Without --keep-going: the script stops on the first error without
-#    cleaning up. This lets you work in the configuration of the failing
-#    component.
-#  * With --keep-going: the script runs all requested components and
-#    reports failures at the end. In particular the script always cleans
-#    up on exit.
-#
-# Note that the output is not saved. You may want to run
-#   script -c tests/scripts/all.sh
-# or
-#   tests/scripts/all.sh >all.log 2>&1
-#
-# Notes for maintainers
-# ---------------------
-#
-# The bulk of the code is organized into functions that follow one of the
-# following naming conventions:
-#  * pre_XXX: things to do before running the tests, in order.
-#  * component_XXX: independent components. They can be run in any order.
-#      * component_check_XXX: quick tests that aren't worth parallelizing.
-#      * component_build_XXX: build things but don't run them.
-#      * component_test_XXX: build and test.
-#      * component_release_XXX: tests that the CI should skip during PR testing.
-#  * support_XXX: if support_XXX exists and returns false then
-#    component_XXX is not run by default.
-#  * post_XXX: things to do after running the tests.
-#  * other: miscellaneous support functions.
-#
-# Each component must start by invoking `msg` with a short informative message.
-#
-# Warning: due to the way bash detects errors, the failure of a command
-# inside 'if' or '!' is not detected. Use the 'not' function instead of '!'.
-#
-# Each component is executed in a separate shell process. The component
-# fails if any command in it returns a non-zero status.
-#
-# The framework performs some cleanup tasks after each component. This
-# means that components can assume that the working directory is in a
-# cleaned-up state, and don't need to perform the cleanup themselves.
-# * Run `make clean`.
-# * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running
-#   the component.
-# * Check out `Makefile`, `library/Makefile`, `programs/Makefile`,
-#   `tests/Makefile` and `programs/fuzz/Makefile` from git.
-#   This cleans up after an in-tree use of CMake.
-#
-# The tests are roughly in order from fastest to slowest. This doesn't
-# have to be exact, but in general you should add slower tests towards
-# the end and fast checks near the beginning.
-
-
-
-################################################################
-#### Initialization and command line parsing
-################################################################
-
-# Abort on errors (even on the left-hand side of a pipe).
-# Treat uninitialised variables as errors.
-set -e -o pipefail -u
-
-# Enable ksh/bash extended file matching patterns
-shopt -s extglob
-
-# For project detection
-in_mbedtls_repo () {
-    test "$PROJECT_NAME" = "Mbed TLS"
-}
-
-in_tf_psa_crypto_repo () {
-    test "$PROJECT_NAME" = "TF-PSA-Crypto"
-}
-
-pre_check_environment () {
-    # For project detection
-    PROJECT_NAME_FILE='./scripts/project_name.txt'
-    if read -r PROJECT_NAME < "$PROJECT_NAME_FILE"; then :; else
-        echo "$PROJECT_NAME_FILE does not exist... Exiting..." >&2
-        exit 1
-    fi
-
-    if in_mbedtls_repo || in_tf_psa_crypto_repo; then :; else
-        echo "Must be run from Mbed TLS / TF-PSA-Crypto root" >&2
-        exit 1
-    fi
-}
-
-pre_initialize_variables () {
-    if in_mbedtls_repo; then
-        CONFIG_H='include/mbedtls/mbedtls_config.h'
-        if [ -d tf-psa-crypto ]; then
-            CRYPTO_CONFIG_H='tf-psa-crypto/include/psa/crypto_config.h'
-            PSA_CORE_PATH='tf-psa-crypto/core'
-            BUILTIN_SRC_PATH='tf-psa-crypto/drivers/builtin/src'
-        else
-            CRYPTO_CONFIG_H='include/psa/crypto_config.h'
-        fi
-    else
-        CONFIG_H='drivers/builtin/include/mbedtls/mbedtls_config.h'
-        CRYPTO_CONFIG_H='include/psa/crypto_config.h'
-        PSA_CORE_PATH='core'
-        BUILTIN_SRC_PATH='drivers/builtin/src'
-    fi
-    CONFIG_TEST_DRIVER_H='tests/include/test/drivers/config_test_driver.h'
-
-    # Files that are clobbered by some jobs will be backed up. Use a different
-    # suffix from auxiliary scripts so that all.sh and auxiliary scripts can
-    # independently decide when to remove the backup file.
-    backup_suffix='.all.bak'
-    # Files clobbered by config.py
-    files_to_back_up="$CONFIG_H $CRYPTO_CONFIG_H $CONFIG_TEST_DRIVER_H"
-    if in_mbedtls_repo; then
-        # Files clobbered by in-tree cmake
-        files_to_back_up="$files_to_back_up Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile"
-    fi
-
-    append_outcome=0
-    MEMORY=0
-    FORCE=0
-    QUIET=0
-    KEEP_GOING=0
-
-    # Seed value used with the --release-test option.
-    #
-    # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if
-    # both values are kept in sync. If you change the value here because it
-    # breaks some tests, you'll definitely want to change it in
-    # basic-build-test.sh as well.
-    RELEASE_SEED=1
-
-    # Specify character collation for regular expressions and sorting with C locale
-    export LC_COLLATE=C
-
-    : ${MBEDTLS_TEST_OUTCOME_FILE=}
-    : ${MBEDTLS_TEST_PLATFORM="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"}
-    export MBEDTLS_TEST_OUTCOME_FILE
-    export MBEDTLS_TEST_PLATFORM
-
-    # Default commands, can be overridden by the environment
-    : ${OPENSSL:="openssl"}
-    : ${OPENSSL_NEXT:="$OPENSSL"}
-    : ${GNUTLS_CLI:="gnutls-cli"}
-    : ${GNUTLS_SERV:="gnutls-serv"}
-    : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build}
-    : ${ARMC5_BIN_DIR:=/usr/bin}
-    : ${ARMC6_BIN_DIR:=/usr/bin}
-    : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-}
-    : ${ARM_LINUX_GNUEABI_GCC_PREFIX:=arm-linux-gnueabi-}
-    : ${CLANG_LATEST:="clang-latest"}
-    : ${CLANG_EARLIEST:="clang-earliest"}
-    : ${GCC_LATEST:="gcc-latest"}
-    : ${GCC_EARLIEST:="gcc-earliest"}
-    # if MAKEFLAGS is not set add the -j option to speed up invocations of make
-    if [ -z "${MAKEFLAGS+set}" ]; then
-        export MAKEFLAGS="-j$(all_sh_nproc)"
-    fi
-    # if CC is not set, use clang by default (if present) to improve build times
-    if [ -z "${CC+set}" ] && (type clang > /dev/null 2>&1); then
-        export CC="clang"
-    fi
-
-    if [ -n "${OPENSSL_3+set}" ]; then
-        export OPENSSL_NEXT="$OPENSSL_3"
-    fi
-
-    # Include more verbose output for failing tests run by CMake or make
-    export CTEST_OUTPUT_ON_FAILURE=1
-
-    # CFLAGS and LDFLAGS for Asan builds that don't use CMake
-    # default to -O2, use -Ox _after_ this if you want another level
-    ASAN_CFLAGS='-O2 -Werror -fsanitize=address,undefined -fno-sanitize-recover=all'
-    # Normally, tests should use this compiler for ASAN testing
-    ASAN_CC=clang
-
-    # Platform tests have an allocation that returns null
-    export ASAN_OPTIONS="allocator_may_return_null=1"
-    export MSAN_OPTIONS="allocator_may_return_null=1"
-
-    # Gather the list of available components. These are the functions
-    # defined in this script whose name starts with "component_".
-    ALL_COMPONENTS=$(compgen -A function component_ | sed 's/component_//')
-
-    PSASIM_PATH='tests/psa-client-server/psasim/'
-
-    # Delay determining SUPPORTED_COMPONENTS until the command line options have a chance to override
-    # the commands set by the environment
-}
-
-setup_quiet_wrappers()
-{
-    # Pick up "quiet" wrappers for make and cmake, which don't output very much
-    # unless there is an error. This reduces logging overhead in the CI.
-    #
-    # Note that the cmake wrapper breaks unless we use an absolute path here.
-    if [[ -e ${PWD}/tests/scripts/quiet ]]; then
-        export PATH=${PWD}/tests/scripts/quiet:$PATH
-    fi
-}
-
-# Test whether the component $1 is included in the command line patterns.
-is_component_included()
-{
-    # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
-    # only does word splitting.
-    set -f
-    for pattern in $COMMAND_LINE_COMPONENTS; do
-        set +f
-        case ${1#component_} in $pattern) return 0;; esac
-    done
-    set +f
-    return 1
-}
-
-usage()
-{
-    cat <<EOF
-Usage: $0 [OPTION]... [COMPONENT]...
-Run mbedtls release validation tests.
-By default, run all tests. With one or more COMPONENT, run only those.
-COMPONENT can be the name of a component or a shell wildcard pattern.
-
-Examples:
-  $0 "check_*"
-    Run all sanity checks.
-  $0 --no-armcc --except test_memsan
-    Run everything except builds that require armcc and MemSan.
-
-Special options:
-  -h|--help             Print this help and exit.
-  --list-all-components List all available test components and exit.
-  --list-components     List components supported on this platform and exit.
-
-General options:
-  -q|--quiet            Only output component names, and errors if any.
-  -f|--force            Force the tests to overwrite any modified files.
-  -k|--keep-going       Run all tests and report errors at the end.
-  -m|--memory           Additional optional memory tests.
-     --append-outcome   Append to the outcome file (if used).
-     --arm-none-eabi-gcc-prefix=<string>
-                        Prefix for a cross-compiler for arm-none-eabi
-                        (default: "${ARM_NONE_EABI_GCC_PREFIX}")
-     --arm-linux-gnueabi-gcc-prefix=<string>
-                        Prefix for a cross-compiler for arm-linux-gnueabi
-                        (default: "${ARM_LINUX_GNUEABI_GCC_PREFIX}")
-     --armcc            Run ARM Compiler builds (on by default).
-     --restore          First clean up the build tree, restoring backed up
-                        files. Do not run any components unless they are
-                        explicitly specified.
-     --error-test       Error test mode: run a failing function in addition
-                        to any specified component. May be repeated.
-     --except           Exclude the COMPONENTs listed on the command line,
-                        instead of running only those.
-     --no-append-outcome    Write a new outcome file and analyze it (default).
-     --no-armcc         Skip ARM Compiler builds.
-     --no-force         Refuse to overwrite modified files (default).
-     --no-keep-going    Stop at the first error (default).
-     --no-memory        No additional memory tests (default).
-     --no-quiet         Print full output from components.
-     --out-of-source-dir=<path>  Directory used for CMake out-of-source build tests.
-     --outcome-file=<path>  File where test outcomes are written (not done if
-                            empty; default: \$MBEDTLS_TEST_OUTCOME_FILE).
-     --random-seed      Use a random seed value for randomized tests (default).
-  -r|--release-test     Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}.
-  -s|--seed             Integer seed value to use for this test run.
-
-Tool path options:
-     --armc5-bin-dir=<ARMC5_bin_dir_path>       ARM Compiler 5 bin directory.
-     --armc6-bin-dir=<ARMC6_bin_dir_path>       ARM Compiler 6 bin directory.
-     --clang-earliest=<Clang_earliest_path>     Earliest version of clang available
-     --clang-latest=<Clang_latest_path>         Latest version of clang available
-     --gcc-earliest=<GCC_earliest_path>         Earliest version of GCC available
-     --gcc-latest=<GCC_latest_path>             Latest version of GCC available
-     --gnutls-cli=<GnuTLS_cli_path>             GnuTLS client executable to use for most tests.
-     --gnutls-serv=<GnuTLS_serv_path>           GnuTLS server executable to use for most tests.
-     --openssl=<OpenSSL_path>                   OpenSSL executable to use for most tests.
-     --openssl-next=<OpenSSL_path>              OpenSSL executable to use for recent things like ARIA
-EOF
-}
-
-# Cleanup before/after running a component.
-# Remove built files as well as the cmake cache/config.
-# Does not remove generated source files.
-cleanup()
-{
-    if in_mbedtls_repo; then
-        command make clean
-    fi
-
-    # Remove CMake artefacts
-    find . -name .git -prune -o \
-           -iname CMakeFiles -exec rm -rf {} \+ -o \
-           \( -iname cmake_install.cmake -o \
-              -iname CTestTestfile.cmake -o \
-              -iname CMakeCache.txt -o \
-              -path './cmake/*.cmake' \) -exec rm -f {} \+
-    # Remove Makefiles generated by in-tree CMake builds
-    rm -f pkgconfig/Makefile framework/Makefile
-    rm -f include/Makefile programs/!(fuzz)/Makefile
-    rm -f tf-psa-crypto/Makefile tf-psa-crypto/include/Makefile
-    rm -f tf-psa-crypto/core/Makefile tf-psa-crypto/drivers/Makefile
-    rm -f tf-psa-crypto/tests/Makefile
-    rm -f tf-psa-crypto/drivers/everest/Makefile
-    rm -f tf-psa-crypto/drivers/p256-m/Makefile
-    rm -f tf-psa-crypto/drivers/builtin/Makefile
-    rm -f tf-psa-crypto/drivers/builtin/src/Makefile
-
-    # Remove any artifacts from the component_test_cmake_as_subdirectory test.
-    rm -rf programs/test/cmake_subproject/build
-    rm -f programs/test/cmake_subproject/Makefile
-    rm -f programs/test/cmake_subproject/cmake_subproject
-
-    # Remove any artifacts from the component_test_cmake_as_package test.
-    rm -rf programs/test/cmake_package/build
-    rm -f programs/test/cmake_package/Makefile
-    rm -f programs/test/cmake_package/cmake_package
-
-    # Remove any artifacts from the component_test_cmake_as_installed_package test.
-    rm -rf programs/test/cmake_package_install/build
-    rm -f programs/test/cmake_package_install/Makefile
-    rm -f programs/test/cmake_package_install/cmake_package_install
-
-    # Restore files that may have been clobbered by the job
-    for x in $files_to_back_up; do
-        if [[ -e "$x$backup_suffix" ]]; then
-            cp -p "$x$backup_suffix" "$x"
-        fi
-    done
-}
-
-# This is a helper function to be used in psasim builds. It is meant to clean
-# up the library's workspace after the server build and before the client
-# build. Built libraries (mbedcrypto, mbedx509 and mbedtls) are supposed to be
-# already copied to psasim folder at this point.
-helper_psasim_cleanup_before_client() {
-    # Clean up library files
-    make -C library clean
-
-    # Restore files that were backup before building library files. This
-    # includes $CONFIG_H and $CRYPTO_CONFIG_H.
-    for x in $files_to_back_up; do
-        if [[ -e "$x$backup_suffix" ]]; then
-            cp -p "$x$backup_suffix" "$x"
-        fi
-    done
-}
-
-# Final cleanup when this script exits (except when exiting on a failure
-# in non-keep-going mode).
-final_cleanup () {
-    cleanup
-
-    for x in $files_to_back_up; do
-        rm -f "$x$backup_suffix"
-    done
-}
-
-# Executed on exit. May be redefined depending on command line options.
-final_report () {
-    :
-}
-
-fatal_signal () {
-    final_cleanup
-    final_report $1
-    trap - $1
-    kill -$1 $$
-}
-
-trap 'fatal_signal HUP' HUP
-trap 'fatal_signal INT' INT
-trap 'fatal_signal TERM' TERM
-
-# Number of processors on this machine. Used as the default setting
-# for parallel make.
-all_sh_nproc ()
-{
-    {
-        nproc || # Linux
-        sysctl -n hw.ncpuonline || # NetBSD, OpenBSD
-        sysctl -n hw.ncpu || # FreeBSD
-        echo 1
-    } 2>/dev/null
-}
-
-msg()
-{
-    if [ -n "${current_component:-}" ]; then
-        current_section="${current_component#component_}: $1"
-    else
-        current_section="$1"
-    fi
-
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    echo ""
-    echo "******************************************************************"
-    echo "* $current_section "
-    printf "* "; date
-    echo "******************************************************************"
-}
-
-armc6_build_test()
-{
-    FLAGS="$1"
-
-    msg "build: ARM Compiler 6 ($FLAGS)"
-    make clean
-    ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \
-                    WARNING_CFLAGS='-Werror -xc -std=c99' make lib
-
-    msg "size: ARM Compiler 6 ($FLAGS)"
-    "$ARMC6_FROMELF" -z library/*.o
-    if [ -n ${PSA_CORE_PATH} ]; then
-        "$ARMC6_FROMELF" -z ${PSA_CORE_PATH}/*.o
-    fi
-    if [ -n ${BUILTIN_SRC_PATH} ]; then
-        "$ARMC6_FROMELF" -z ${BUILTIN_SRC_PATH}/*.o
-    fi
-}
-
-err_msg()
-{
-    echo "$1" >&2
-}
-
-check_tools()
-{
-    for tool in "$@"; do
-        if ! `type "$tool" >/dev/null 2>&1`; then
-            err_msg "$tool not found!"
-            exit 1
-        fi
-    done
-}
-
-pre_parse_command_line () {
-    COMMAND_LINE_COMPONENTS=
-    all_except=0
-    error_test=0
-    list_components=0
-    restore_first=0
-    no_armcc=
-
-    # Note that legacy options are ignored instead of being omitted from this
-    # list of options, so invocations that worked with previous version of
-    # all.sh will still run and work properly.
-    while [ $# -gt 0 ]; do
-        case "$1" in
-            --append-outcome) append_outcome=1;;
-            --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";;
-            --arm-linux-gnueabi-gcc-prefix) shift; ARM_LINUX_GNUEABI_GCC_PREFIX="$1";;
-            --armcc) no_armcc=;;
-            --armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";;
-            --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";;
-            --clang-earliest) shift; CLANG_EARLIEST="$1";;
-            --clang-latest) shift; CLANG_LATEST="$1";;
-            --error-test) error_test=$((error_test + 1));;
-            --except) all_except=1;;
-            --force|-f) FORCE=1;;
-            --gcc-earliest) shift; GCC_EARLIEST="$1";;
-            --gcc-latest) shift; GCC_LATEST="$1";;
-            --gnutls-cli) shift; GNUTLS_CLI="$1";;
-            --gnutls-legacy-cli) shift;; # ignored for backward compatibility
-            --gnutls-legacy-serv) shift;; # ignored for backward compatibility
-            --gnutls-serv) shift; GNUTLS_SERV="$1";;
-            --help|-h) usage; exit;;
-            --keep-going|-k) KEEP_GOING=1;;
-            --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;;
-            --list-components) list_components=1;;
-            --memory|-m) MEMORY=1;;
-            --no-append-outcome) append_outcome=0;;
-            --no-armcc) no_armcc=1;;
-            --no-force) FORCE=0;;
-            --no-keep-going) KEEP_GOING=0;;
-            --no-memory) MEMORY=0;;
-            --no-quiet) QUIET=0;;
-            --openssl) shift; OPENSSL="$1";;
-            --openssl-next) shift; OPENSSL_NEXT="$1";;
-            --outcome-file) shift; MBEDTLS_TEST_OUTCOME_FILE="$1";;
-            --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";;
-            --quiet|-q) QUIET=1;;
-            --random-seed) unset SEED;;
-            --release-test|-r) SEED=$RELEASE_SEED;;
-            --restore) restore_first=1;;
-            --seed|-s) shift; SEED="$1";;
-            -*)
-                echo >&2 "Unknown option: $1"
-                echo >&2 "Run $0 --help for usage."
-                exit 120
-                ;;
-            *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";;
-        esac
-        shift
-    done
-
-    # Exclude components that are not supported on this platform.
-    SUPPORTED_COMPONENTS=
-    for component in $ALL_COMPONENTS; do
-        case $(type "support_$component" 2>&1) in
-            *' function'*)
-                if ! support_$component; then continue; fi;;
-        esac
-        SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component"
-    done
-
-    if [ $list_components -eq 1 ]; then
-        printf '%s\n' $SUPPORTED_COMPONENTS
-        exit
-    fi
-
-    # With no list of components, run everything.
-    if [ -z "$COMMAND_LINE_COMPONENTS" ] && [ $restore_first -eq 0 ]; then
-        all_except=1
-    fi
-
-    # --no-armcc is a legacy option. The modern way is --except '*_armcc*'.
-    # Ignore it if components are listed explicitly on the command line.
-    if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then
-        COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*"
-    fi
-
-    # Error out if an explicitly requested component doesn't exist.
-    if [ $all_except -eq 0 ]; then
-        unsupported=0
-        # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS
-        # only does word splitting.
-        set -f
-        for component in $COMMAND_LINE_COMPONENTS; do
-            set +f
-            # If the requested name includes a wildcard character, don't
-            # check it. Accept wildcard patterns that don't match anything.
-            case $component in
-                *[*?\[]*) continue;;
-            esac
-            case " $SUPPORTED_COMPONENTS " in
-                *" $component "*) :;;
-                *)
-                    echo >&2 "Component $component was explicitly requested, but is not known or not supported."
-                    unsupported=$((unsupported + 1));;
-            esac
-        done
-        set +f
-        if [ $unsupported -ne 0 ]; then
-            exit 2
-        fi
-    fi
-
-    # Build the list of components to run.
-    RUN_COMPONENTS=
-    for component in $SUPPORTED_COMPONENTS; do
-        if is_component_included "$component"; [ $? -eq $all_except ]; then
-            RUN_COMPONENTS="$RUN_COMPONENTS $component"
-        fi
-    done
-
-    unset all_except
-    unset no_armcc
-}
-
-pre_check_git () {
-    if [ $FORCE -eq 1 ]; then
-        rm -rf "$OUT_OF_SOURCE_DIR"
-        git checkout-index -f -q $CONFIG_H
-        cleanup
-    else
-
-        if [ -d "$OUT_OF_SOURCE_DIR" ]; then
-            echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2
-            echo "You can either delete this directory manually, or force the test by rerunning"
-            echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR"
-            exit 1
-        fi
-
-        if ! git diff --quiet "$CONFIG_H"; then
-            err_msg "Warning - the configuration file '$CONFIG_H' has been edited. "
-            echo "You can either delete or preserve your work, or force the test by rerunning the"
-            echo "script as: $0 --force"
-            exit 1
-        fi
-    fi
-}
-
-pre_restore_files () {
-    # If the makefiles have been generated by a framework such as cmake,
-    # restore them from git. If the makefiles look like modifications from
-    # the ones checked into git, take care not to modify them. Whatever
-    # this function leaves behind is what the script will restore before
-    # each component.
-    case "$(head -n1 Makefile)" in
-        *[Gg]enerated*)
-            git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
-            git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile
-            ;;
-    esac
-}
-
-pre_back_up () {
-    for x in $files_to_back_up; do
-        cp -p "$x" "$x$backup_suffix"
-    done
-}
-
-pre_setup_keep_going () {
-    failure_count=0 # Number of failed components
-    last_failure_status=0 # Last failure status in this component
-
-    # See err_trap
-    previous_failure_status=0
-    previous_failed_command=
-    previous_failure_funcall_depth=0
-    unset report_failed_command
-
-    start_red=
-    end_color=
-    if [ -t 1 ]; then
-        case "${TERM:-}" in
-            *color*|cygwin|linux|rxvt*|screen|[Eex]term*)
-                start_red=$(printf '\033[31m')
-                end_color=$(printf '\033[0m')
-                ;;
-        esac
-    fi
-
-    # Keep a summary of failures in a file. We'll print it out at the end.
-    failure_summary_file=$PWD/all-sh-failures-$$.log
-    : >"$failure_summary_file"
-
-    # Whether it makes sense to keep a component going after the specified
-    # command fails (test command) or not (configure or build).
-    # This function normally receives the failing simple command
-    # ($BASH_COMMAND) as an argument, but if $report_failed_command is set,
-    # this is passed instead.
-    # This doesn't have to be 100% accurate: all failures are recorded anyway.
-    # False positives result in running things that can't be expected to
-    # work. False negatives result in things not running after something else
-    # failed even though they might have given useful feedback.
-    can_keep_going_after_failure () {
-        case "$1" in
-            "msg "*) false;;
-            "cd "*) false;;
-            "diff "*) true;;
-            *make*[\ /]tests*) false;; # make tests, make CFLAGS=-I../tests, ...
-            *test*) true;; # make test, tests/stuff, env V=v tests/stuff, ...
-            *make*check*) true;;
-            "grep "*) true;;
-            "[ "*) true;;
-            "! "*) true;;
-            *) false;;
-        esac
-    }
-
-    # This function runs if there is any error in a component.
-    # It must either exit with a nonzero status, or set
-    # last_failure_status to a nonzero value.
-    err_trap () {
-        # Save $? (status of the failing command). This must be the very
-        # first thing, before $? is overridden.
-        last_failure_status=$?
-        failed_command=${report_failed_command-$BASH_COMMAND}
-
-        if [[ $last_failure_status -eq $previous_failure_status &&
-              "$failed_command" == "$previous_failed_command" &&
-              ${#FUNCNAME[@]} == $((previous_failure_funcall_depth - 1)) ]]
-        then
-            # The same command failed twice in a row, but this time one level
-            # less deep in the function call stack. This happens when the last
-            # command of a function returns a nonzero status, and the function
-            # returns that same status. Ignore the second failure.
-            previous_failure_funcall_depth=${#FUNCNAME[@]}
-            return
-        fi
-        previous_failure_status=$last_failure_status
-        previous_failed_command=$failed_command
-        previous_failure_funcall_depth=${#FUNCNAME[@]}
-
-        text="$current_section: $failed_command -> $last_failure_status"
-        echo "${start_red}^^^^$text^^^^${end_color}" >&2
-        echo "$text" >>"$failure_summary_file"
-
-        # If the command is fatal (configure or build command), stop this
-        # component. Otherwise (test command) keep the component running
-        # (run more tests from the same build).
-        if ! can_keep_going_after_failure "$failed_command"; then
-            exit $last_failure_status
-        fi
-    }
-
-    final_report () {
-        if [ $failure_count -gt 0 ]; then
-            echo
-            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-            echo "${start_red}FAILED: $failure_count components${end_color}"
-            cat "$failure_summary_file"
-            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
-        elif [ -z "${1-}" ]; then
-            echo "SUCCESS :)"
-        fi
-        if [ -n "${1-}" ]; then
-            echo "Killed by SIG$1."
-        fi
-        rm -f "$failure_summary_file"
-        if [ $failure_count -gt 0 ]; then
-            exit 1
-        fi
-    }
-}
-
-# record_status() and if_build_succeeded() are kept temporarily for backward
-# compatibility. Don't use them in new components.
-record_status () {
-    "$@"
-}
-if_build_succeeded () {
-    "$@"
-}
-
-# '! true' does not trigger the ERR trap. Arrange to trigger it, with
-# a reasonably informative error message (not just "$@").
-not () {
-    if "$@"; then
-        report_failed_command="! $*"
-        false
-        unset report_failed_command
-    fi
-}
-
-pre_prepare_outcome_file () {
-    case "$MBEDTLS_TEST_OUTCOME_FILE" in
-      [!/]*) MBEDTLS_TEST_OUTCOME_FILE="$PWD/$MBEDTLS_TEST_OUTCOME_FILE";;
-    esac
-    if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ] && [ "$append_outcome" -eq 0 ]; then
-        rm -f "$MBEDTLS_TEST_OUTCOME_FILE"
-    fi
-}
-
-pre_print_configuration () {
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    msg "info: $0 configuration"
-    echo "MEMORY: $MEMORY"
-    echo "FORCE: $FORCE"
-    echo "MBEDTLS_TEST_OUTCOME_FILE: ${MBEDTLS_TEST_OUTCOME_FILE:-(none)}"
-    echo "SEED: ${SEED-"UNSET"}"
-    echo
-    echo "OPENSSL: $OPENSSL"
-    echo "OPENSSL_NEXT: $OPENSSL_NEXT"
-    echo "GNUTLS_CLI: $GNUTLS_CLI"
-    echo "GNUTLS_SERV: $GNUTLS_SERV"
-    echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR"
-    echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR"
-}
-
-# Make sure the tools we need are available.
-pre_check_tools () {
-    # Build the list of variables to pass to output_env.sh.
-    set env
-
-    case " $RUN_COMPONENTS " in
-        # Require OpenSSL and GnuTLS if running any tests (as opposed to
-        # only doing builds). Not all tests run OpenSSL and GnuTLS, but this
-        # is a good enough approximation in practice.
-        *" test_"* | *" release_test_"*)
-            # To avoid setting OpenSSL and GnuTLS for each call to compat.sh
-            # and ssl-opt.sh, we just export the variables they require.
-            export OPENSSL="$OPENSSL"
-            export GNUTLS_CLI="$GNUTLS_CLI"
-            export GNUTLS_SERV="$GNUTLS_SERV"
-            # Avoid passing --seed flag in every call to ssl-opt.sh
-            if [ -n "${SEED-}" ]; then
-                export SEED
-            fi
-            set "$@" OPENSSL="$OPENSSL"
-            set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV"
-            check_tools "$OPENSSL" "$OPENSSL_NEXT" \
-                        "$GNUTLS_CLI" "$GNUTLS_SERV"
-            ;;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_doxygen[_\ ]*) check_tools "doxygen" "dot";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *" test_zeroize "*) check_tools "gdb";;
-    esac
-
-    case " $RUN_COMPONENTS " in
-        *_armcc*)
-            ARMC5_CC="$ARMC5_BIN_DIR/armcc"
-            ARMC5_AR="$ARMC5_BIN_DIR/armar"
-            ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf"
-            ARMC6_CC="$ARMC6_BIN_DIR/armclang"
-            ARMC6_AR="$ARMC6_BIN_DIR/armar"
-            ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf"
-            check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \
-                        "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";;
-    esac
-
-    # past this point, no call to check_tool, only printing output
-    if [ $QUIET -eq 1 ]; then
-        return
-    fi
-
-    msg "info: output_env.sh"
-    case $RUN_COMPONENTS in
-        *_armcc*)
-            set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;;
-        *) set "$@" RUN_ARMCC=0;;
-    esac
-    "$@" scripts/output_env.sh
-}
-
-pre_generate_files() {
-    # since make doesn't have proper dependencies, remove any possibly outdate
-    # file that might be around before generating fresh ones
-    make neat
-    if [ $QUIET -eq 1 ]; then
-        make generated_files >/dev/null
-    else
-        make generated_files
-    fi
-}
-
-clang_version() {
-    if command -v clang > /dev/null ; then
-        clang --version|grep version|sed -E 's#.*version ([0-9]+).*#\1#'
-    else
-        echo 0  # report version 0 for "no clang"
-    fi
-}
-
-################################################################
-#### Helpers for components using libtestdriver1
-################################################################
-
-# How to use libtestdriver1
-# -------------------------
-#
-# 1. Define the list algorithms and key types to accelerate,
-#    designated the same way as PSA_WANT_ macros but without PSA_WANT_.
-#    Examples:
-#      - loc_accel_list="ALG_JPAKE"
-#      - loc_accel_list="ALG_FFDH KEY_TYPE_DH_KEY_PAIR KEY_TYPE_DH_PUBLIC_KEY"
-# 2. Make configurations changes for the driver and/or main libraries.
-#    2a. Call helper_libtestdriver1_adjust_config <base>, where the argument
-#        can be either "default" to start with the default config, or a name
-#        supported by scripts/config.py (for example, "full"). This selects
-#        the base to use, and makes common adjustments.
-#    2b. If desired, adjust the PSA_WANT symbols in psa/crypto_config.h.
-#        These changes affect both the driver and the main libraries.
-#        (Note: they need to have the same set of PSA_WANT symbols, as that
-#        determines the ABI between them.)
-#    2c. Adjust MBEDTLS_ symbols in mbedtls_config.h. This only affects the
-#        main libraries. Typically, you want to disable the module(s) that are
-#        being accelerated. You may need to also disable modules that depend
-#        on them or options that are not supported with drivers.
-#    2d. On top of psa/crypto_config.h, the driver library uses its own config
-#        file: tests/include/test/drivers/config_test_driver.h. You usually
-#        don't need to edit it: using loc_extra_list (see below) is preferred.
-#        However, when there's no PSA symbol for what you want to enable,
-#        calling scripts/config.py on this file remains the only option.
-# 3. Build the driver library, then the main libraries, test, and programs.
-#    3a. Call helper_libtestdriver1_make_drivers "$loc_accel_list". You may
-#        need to enable more algorithms here, typically hash algorithms when
-#        accelerating some signature algorithms (ECDSA, RSAv2). This is done
-#        by passing a 2nd argument listing the extra algorithms.
-#        Example:
-#          loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512"
-#          helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-#    3b. Call helper_libtestdriver1_make_main "$loc_accel_list". Any
-#        additional arguments will be passed to make: this can be useful if
-#        you don't want to build everything when iterating during development.
-#        Example:
-#          helper_libtestdriver1_make_main "$loc_accel_list" -C tests test_suite_foo
-# 4. Run the tests you want.
-
-# Adjust the configuration - for both libtestdriver1 and main library,
-# as they should have the same PSA_WANT macros.
-helper_libtestdriver1_adjust_config() {
-    base_config=$1
-    # Select the base configuration
-    if [ "$base_config" != "default" ]; then
-        scripts/config.py "$base_config"
-    fi
-
-    # Enable PSA-based config (necessary to use drivers)
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
-
-    # Dynamic secure element support is a deprecated feature and needs to be disabled here.
-    # This is done to have the same form of psa_key_attributes_s for libdriver and library.
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-
-    # If threading is enabled on the normal build, then we need to enable it in the drivers as well,
-    # otherwise we will end up running multithreaded tests without mutexes to protect them.
-    if scripts/config.py get MBEDTLS_THREADING_C; then
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_C
-    fi
-
-    if scripts/config.py get MBEDTLS_THREADING_PTHREAD; then
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_THREADING_PTHREAD
-    fi
-}
-
-# Build the drivers library libtestdriver1.a (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# 2. optional: a space-separate list of things to also support.
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_drivers() {
-    loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    make CC=$ASAN_CC -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# Build the main libraries, programs and tests,
-# linking to the drivers library (with ASan).
-#
-# Parameters:
-# 1. a space-separated list of things to accelerate;
-# *. remaining arguments if any are passed directly to make
-#    (examples: lib, -C tests test_suite_xxx, etc.)
-# Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed.
-helper_libtestdriver1_make_main() {
-    loc_accel_list=$1
-    shift
-
-    # we need flags both with and without the LIBTESTDRIVER1_ prefix
-    loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' )
-    loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
-}
-
-# Set some default values $CONFIG_H in order to build server or client sides
-# in PSASIM. There is only 1 mandatory parameter:
-# - $1: target which can be "client" or "server"
-helper_psasim_config() {
-    TARGET=$1
-
-    if [ "$TARGET" == "client" ]; then
-        scripts/config.py full
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
-        # Dynamic secure element support is a deprecated feature and it is not
-        # available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled.
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-        # Disable potentially problematic features
-        scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-        scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
-    else
-        scripts/config.py crypto_full
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
-        # We need to match the client with MBEDTLS_PSA_CRYPTO_SE_C
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-        # Also ensure MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER not set (to match client)
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
-    fi
-}
-
-# Helper to build the libraries for client/server in PSASIM. If the server is
-# being built, then it builds also the final executable.
-# There is only 1 mandatory parameter:
-# - $1: target which can be "client" or "server"
-helper_psasim_build() {
-    TARGET=$1
-    shift
-    TARGET_LIB=${TARGET}_libs
-
-    make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" $TARGET_LIB "$@"
-
-    # Build also the server application after its libraries have been built.
-    if [ "$TARGET" == "server" ]; then
-        make -C $PSASIM_PATH CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test/psa_server
-    fi
-}
-
-################################################################
-#### Configuration helpers
-################################################################
-
-# When called with no parameter this function disables all builtin curves.
-# The function optionally accepts 1 parameter: a space-separated list of the
-# curves that should be kept enabled.
-helper_disable_builtin_curves() {
-    allowed_list="${1:-}"
-    scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
-
-    for curve in $allowed_list; do
-        scripts/config.py set $curve
-    done
-}
-
-# Helper returning the list of supported elliptic curves from CRYPTO_CONFIG_H,
-# without the "PSA_WANT_" prefix. This becomes handy for accelerating curves
-# in the following helpers.
-helper_get_psa_curve_list () {
-    loc_list=""
-    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        loc_list="$loc_list $item"
-    done
-
-    echo "$loc_list"
-}
-
-# Helper returning the list of supported DH groups from CRYPTO_CONFIG_H,
-# without the "PSA_WANT_" prefix. This becomes handy for accelerating DH groups
-# in the following helpers.
-helper_get_psa_dh_group_list () {
-    loc_list=""
-    for item in $(sed -n 's/^#define PSA_WANT_\(DH_RFC7919_[0-9]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        loc_list="$loc_list $item"
-    done
-
-    echo "$loc_list"
-}
-
-# Get the list of uncommented PSA_WANT_KEY_TYPE_xxx_ from CRYPTO_CONFIG_H. This
-# is useful to easily get a list of key type symbols to accelerate.
-# The function accepts a single argument which is the key type: ECC, DH, RSA.
-helper_get_psa_key_type_list() {
-    key_type="$1"
-    loc_list=""
-    for item in $(sed -n "s/^#define PSA_WANT_\(KEY_TYPE_${key_type}_[0-9A-Z_a-z]*\).*/\1/p" <"$CRYPTO_CONFIG_H"); do
-        # Skip DERIVE for elliptic keys since there is no driver dispatch for
-        # it so it cannot be accelerated.
-        if [ "$item" != "KEY_TYPE_ECC_KEY_PAIR_DERIVE" ]; then
-            loc_list="$loc_list $item"
-        fi
-    done
-
-    echo "$loc_list"
-}
-
-# Include the components from components.sh
+# The path is going to change when this is moved to the framework
 test_script_dir="${0%/*}"
-for file in "$test_script_dir"/components*.sh; do
-    source $file
-done
+source "$test_script_dir"/all-core.sh
 
-
-################################################################
-#### Termination
-################################################################
-
-post_report () {
-    msg "Done, cleaning up"
-    final_cleanup
-
-    final_report
-}
-
-################################################################
-#### Run all the things
-################################################################
-
-# Function invoked by --error-test to test error reporting.
-pseudo_component_error_test () {
-    msg "Testing error reporting $error_test_i"
-    if [ $KEEP_GOING -ne 0 ]; then
-        echo "Expect three failing commands."
-    fi
-    # If the component doesn't run in a subshell, changing error_test_i to an
-    # invalid integer will cause an error in the loop that runs this function.
-    error_test_i=this_should_not_be_used_since_the_component_runs_in_a_subshell
-    # Expected error: 'grep non_existent /dev/null -> 1'
-    grep non_existent /dev/null
-    # Expected error: '! grep -q . tests/scripts/all.sh -> 1'
-    not grep -q . "$0"
-    # Expected error: 'make unknown_target -> 2'
-    make unknown_target
-    false "this should not be executed"
-}
-
-# Run one component and clean up afterwards.
-run_component () {
-    current_component="$1"
-    export MBEDTLS_TEST_CONFIGURATION="$current_component"
-
-    # Unconditionally create a seedfile that's sufficiently long.
-    # Do this before each component, because a previous component may
-    # have messed it up or shortened it.
-    local dd_cmd
-    dd_cmd=(dd if=/dev/urandom of=./tests/seedfile bs=64 count=1)
-    case $OSTYPE in
-        linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
-    esac
-    "${dd_cmd[@]}"
-
-    if [ -d tf-psa-crypto ]; then
-        dd_cmd=(dd if=/dev/urandom of=./tf-psa-crypto/tests/seedfile bs=64 count=1)
-        case $OSTYPE in
-            linux*|freebsd*|openbsd*) dd_cmd+=(status=none)
-        esac
-        "${dd_cmd[@]}"
-    fi
-
-    # Run the component in a subshell, with error trapping and output
-    # redirection set up based on the relevant options.
-    if [ $KEEP_GOING -eq 1 ]; then
-        # We want to keep running if the subshell fails, so 'set -e' must
-        # be off when the subshell runs.
-        set +e
-    fi
-    (
-        if [ $QUIET -eq 1 ]; then
-            # msg() will be silenced, so just print the component name here.
-            echo "${current_component#component_}"
-            exec >/dev/null
-        fi
-        if [ $KEEP_GOING -eq 1 ]; then
-            # Keep "set -e" off, and run an ERR trap instead to record failures.
-            set -E
-            trap err_trap ERR
-        fi
-        # The next line is what runs the component
-        "$@"
-        if [ $KEEP_GOING -eq 1 ]; then
-            trap - ERR
-            exit $last_failure_status
-        fi
-    )
-    component_status=$?
-    if [ $KEEP_GOING -eq 1 ]; then
-        set -e
-        if [ $component_status -ne 0 ]; then
-            failure_count=$((failure_count + 1))
-        fi
-    fi
-
-    # Restore the build tree to a clean state.
-    cleanup
-    unset current_component
-}
-
-# Preliminary setup
-pre_check_environment
-pre_initialize_variables
-pre_parse_command_line "$@"
-
-setup_quiet_wrappers
-pre_check_git
-pre_restore_files
-pre_back_up
-
-build_status=0
-if [ $KEEP_GOING -eq 1 ]; then
-    pre_setup_keep_going
-fi
-pre_prepare_outcome_file
-pre_print_configuration
-pre_check_tools
-cleanup
-if in_mbedtls_repo; then
-    pre_generate_files
-fi
-
-# Run the requested tests.
-for ((error_test_i=1; error_test_i <= error_test; error_test_i++)); do
-    run_component pseudo_component_error_test
-done
-unset error_test_i
-for component in $RUN_COMPONENTS; do
-    run_component "component_$component"
-done
-
-# We're done.
-post_report
+main "$@"
diff --git a/tests/scripts/analyze_outcomes.py b/tests/scripts/analyze_outcomes.py
index 72dba99..c2ec34e 100755
--- a/tests/scripts/analyze_outcomes.py
+++ b/tests/scripts/analyze_outcomes.py
@@ -7,15 +7,273 @@
 """
 
 import re
+import typing
 
 import scripts_path # pylint: disable=unused-import
 from mbedtls_framework import outcome_analysis
 
 
 class CoverageTask(outcome_analysis.CoverageTask):
-    # We'll populate IGNORED_TESTS soon. In the meantime, lack of coverage
-    # is just a warning.
-    outcome_analysis.FULL_COVERAGE_BY_DEFAULT = False
+    """Justify test cases that are never executed."""
+
+    @staticmethod
+    def _has_word_re(words: typing.Iterable[str],
+                     exclude: typing.Optional[str] = None) -> typing.Pattern:
+        """Construct a regex that matches if any of the words appears.
+
+        The occurrence must start and end at a word boundary.
+
+        If exclude is specified, strings containing a match for that
+        regular expression will not match the returned pattern.
+        """
+        exclude_clause = r''
+        if exclude:
+            exclude_clause = r'(?!.*' + exclude + ')'
+        return re.compile(exclude_clause +
+                          r'.*\b(?:' + r'|'.join(words) + r')\b.*',
+                          re.DOTALL)
+
+    # generate_psa_tests.py generates test cases involving cryptographic
+    # mechanisms (key types, families, algorithms) that are declared but
+    # not implemented. Until we improve the Python scripts, ignore those
+    # test cases in the analysis.
+    # https://github.com/Mbed-TLS/mbedtls/issues/9572
+    _PSA_MECHANISMS_NOT_IMPLEMENTED = [
+        r'CBC_MAC',
+        r'DETERMINISTIC_DSA',
+        r'DET_DSA',
+        r'DSA',
+        r'ECC_KEY_PAIR\(BRAINPOOL_P_R1\) (?:160|192|224|320)-bit',
+        r'ECC_KEY_PAIR\(SECP_K1\) 225-bit',
+        r'ECC_PAIR\(BP_R1\) (?:160|192|224|320)-bit',
+        r'ECC_PAIR\(SECP_K1\) 225-bit',
+        r'ECC_PUBLIC_KEY\(BRAINPOOL_P_R1\) (?:160|192|224|320)-bit',
+        r'ECC_PUBLIC_KEY\(SECP_K1\) 225-bit',
+        r'ECC_PUB\(BP_R1\) (?:160|192|224|320)-bit',
+        r'ECC_PUB\(SECP_K1\) 225-bit',
+        r'ED25519PH',
+        r'ED448PH',
+        r'PEPPER',
+        r'PURE_EDDSA',
+        r'SECP_R2',
+        r'SECT_K1',
+        r'SECT_R1',
+        r'SECT_R2',
+        r'SHAKE256_512',
+        r'SHA_512_224',
+        r'SHA_512_256',
+        r'TWISTED_EDWARDS',
+        r'XTS',
+    ]
+    PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE = \
+        _has_word_re(_PSA_MECHANISMS_NOT_IMPLEMENTED)
+
+    IGNORED_TESTS = {
+        'ssl-opt': [
+            # We don't run ssl-opt.sh with Valgrind on the CI because
+            # it's extremely slow. We don't intend to change this.
+            'DTLS client reconnect from same port: reconnect, nbio, valgrind',
+            # We don't have IPv6 in our CI environment.
+            # https://github.com/Mbed-TLS/mbedtls-test/issues/176
+            'DTLS cookie: enabled, IPv6',
+            # Disabled due to OpenSSL bug.
+            # https://github.com/openssl/openssl/issues/18887
+            'DTLS fragmenting: 3d, openssl client, DTLS 1.2',
+            # We don't run ssl-opt.sh with Valgrind on the CI because
+            # it's extremely slow. We don't intend to change this.
+            'DTLS fragmenting: proxy MTU: auto-reduction (with valgrind)',
+            # TLS doesn't use restartable ECDH yet.
+            # https://github.com/Mbed-TLS/mbedtls/issues/7294
+            re.compile(r'EC restart:.*no USE_PSA.*'),
+            # It seems that we don't run `ssl-opt.sh` with
+            # `MBEDTLS_USE_PSA_CRYPTO` enabled but `MBEDTLS_SSL_ASYNC_PRIVATE`
+            # disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9581
+            'Opaque key for server authentication: invalid key: decrypt with ECC key, no async',
+            'Opaque key for server authentication: invalid key: ecdh with RSA key, no async',
+        ],
+        'test_suite_config.mbedtls_boolean': [
+            # https://github.com/Mbed-TLS/mbedtls/issues/9583
+            'Config: !MBEDTLS_ECP_NIST_OPTIM',
+            # We never test without the PSA client code. Should we?
+            # https://github.com/Mbed-TLS/TF-PSA-Crypto/issues/112
+            'Config: !MBEDTLS_PSA_CRYPTO_CLIENT',
+            # Missing coverage of test configurations.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9585
+            'Config: !MBEDTLS_SSL_DTLS_ANTI_REPLAY',
+            # Missing coverage of test configurations.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9585
+            'Config: !MBEDTLS_SSL_DTLS_HELLO_VERIFY',
+            # We don't run test_suite_config when we test this.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9586
+            'Config: !MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED',
+            # We only test multithreading with pthreads.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9584
+            'Config: !MBEDTLS_THREADING_PTHREAD',
+            # Built but not tested.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9587
+            'Config: MBEDTLS_AES_USE_HARDWARE_ONLY',
+            # Untested platform-specific optimizations.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9588
+            'Config: MBEDTLS_HAVE_SSE2',
+            # Obsolete configuration option, to be replaced by
+            # PSA entropy drivers.
+            # https://github.com/Mbed-TLS/mbedtls/issues/8150
+            'Config: MBEDTLS_NO_PLATFORM_ENTROPY',
+            # Untested aspect of the platform interface.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9589
+            'Config: MBEDTLS_PLATFORM_NO_STD_FUNCTIONS',
+            # In a client-server build, test_suite_config runs in the
+            # client configuration, so it will never report
+            # MBEDTLS_PSA_CRYPTO_SPM as enabled. That's ok.
+            'Config: MBEDTLS_PSA_CRYPTO_SPM',
+            # We don't test on armv8 yet.
+            'Config: MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT',
+            'Config: MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY',
+            'Config: MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY',
+            'Config: MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY',
+            # We don't run test_suite_config when we test this.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9586
+            'Config: MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND',
+        ],
+        'test_suite_config.psa_boolean': [
+            # We don't test with HMAC disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9591
+            'Config: !PSA_WANT_ALG_HMAC',
+            # The DERIVE key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_DERIVE',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: !PSA_WANT_KEY_TYPE_DH_KEY_PAIR_EXPORT',
+            'Config: !PSA_WANT_KEY_TYPE_DH_KEY_PAIR_GENERATE',
+            'Config: !PSA_WANT_KEY_TYPE_DH_KEY_PAIR_IMPORT',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: !PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT',
+            'Config: !PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT',
+            # We don't test with HMAC disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9591
+            'Config: !PSA_WANT_KEY_TYPE_HMAC',
+            # The PASSWORD key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_PASSWORD',
+            # The PASSWORD_HASH key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_PASSWORD_HASH',
+            # The RAW_DATA key type is always enabled.
+            'Config: !PSA_WANT_KEY_TYPE_RAW_DATA',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: !PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT',
+            'Config: !PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT',
+            # Algorithm declared but not supported.
+            'Config: PSA_WANT_ALG_CBC_MAC',
+            # Algorithm declared but not supported.
+            'Config: PSA_WANT_ALG_XTS',
+            # Family declared but not supported.
+            'Config: PSA_WANT_ECC_SECP_K1_224',
+            # More granularity of key pair type enablement macros
+            # than we care to test.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9590
+            'Config: PSA_WANT_KEY_TYPE_DH_KEY_PAIR_DERIVE',
+            'Config: PSA_WANT_KEY_TYPE_ECC_KEY_PAIR',
+            'Config: PSA_WANT_KEY_TYPE_RSA_KEY_PAIR',
+            'Config: PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_DERIVE',
+        ],
+        'test_suite_config.psa_combinations': [
+            # We don't test this unusual, but sensible configuration.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9592
+            'Config: PSA_WANT_ALG_DETERMINSTIC_ECDSA without PSA_WANT_ALG_ECDSA',
+        ],
+        'test_suite_pkcs12': [
+            # We never test with CBC/PKCS5/PKCS12 enabled but
+            # PKCS7 padding disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9580
+            'PBE Decrypt, (Invalid padding & PKCS7 padding disabled)',
+            'PBE Encrypt, pad = 8 (PKCS7 padding disabled)',
+        ],
+        'test_suite_pkcs5': [
+            # We never test with CBC/PKCS5/PKCS12 enabled but
+            # PKCS7 padding disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9580
+            'PBES2 Decrypt (Invalid padding & PKCS7 padding disabled)',
+            'PBES2 Encrypt, pad=6 (PKCS7 padding disabled)',
+            'PBES2 Encrypt, pad=8 (PKCS7 padding disabled)',
+        ],
+        'test_suite_psa_crypto_generate_key.generated': [
+            # Ignore mechanisms that are not implemented, except
+            # for public keys for which we always test that
+            # psa_generate_key() returns PSA_ERROR_INVALID_ARGUMENT
+            # regardless of whether the specific key type is supported.
+            _has_word_re((mech
+                          for mech in _PSA_MECHANISMS_NOT_IMPLEMENTED
+                          if not mech.startswith('ECC_PUB')),
+                         exclude=r'ECC_PUB'),
+        ],
+        'test_suite_psa_crypto_metadata': [
+            # Algorithms declared but not supported.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9579
+            'Asymmetric signature: Ed25519ph',
+            'Asymmetric signature: Ed448ph',
+            'Asymmetric signature: pure EdDSA',
+            'Cipher: XTS',
+            'MAC: CBC_MAC-3DES',
+            'MAC: CBC_MAC-AES-128',
+            'MAC: CBC_MAC-AES-192',
+            'MAC: CBC_MAC-AES-256',
+        ],
+        'test_suite_psa_crypto_not_supported.generated': [
+            # It is a bug that not-supported test cases aren't getting
+            # run for never-implemented key types.
+            # https://github.com/Mbed-TLS/mbedtls/issues/7915
+            PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE,
+            # We never test with DH key support disabled but support
+            # for a DH group enabled. The dependencies of these test
+            # cases don't really make sense.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9574
+            re.compile(r'PSA \w+ DH_.*type not supported'),
+            # We only test partial support for DH with the 2048-bit group
+            # enabled and the other groups disabled.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9575
+            'PSA generate DH_KEY_PAIR(RFC7919) 2048-bit group not supported',
+            'PSA import DH_KEY_PAIR(RFC7919) 2048-bit group not supported',
+            'PSA import DH_PUBLIC_KEY(RFC7919) 2048-bit group not supported',
+        ],
+        'test_suite_psa_crypto_op_fail.generated': [
+            # Ignore mechanisms that are not implemented, except
+            # for test cases that assume the mechanism is not supported.
+            _has_word_re(_PSA_MECHANISMS_NOT_IMPLEMENTED,
+                         exclude=(r'.*: !(?:' +
+                                  r'|'.join(_PSA_MECHANISMS_NOT_IMPLEMENTED) +
+                                  r')\b')),
+            # Incorrect dependency generation. To be fixed as part of the
+            # resolution of https://github.com/Mbed-TLS/mbedtls/issues/9167
+            # by forward-porting the commit
+            # "PSA test case generation: dependency inference class: operation fail"
+            # from https://github.com/Mbed-TLS/mbedtls/pull/9025 .
+            re.compile(r'.* with (?:DH|ECC)_(?:KEY_PAIR|PUBLIC_KEY)\(.*'),
+
+            # We never test with the HMAC algorithm enabled but the HMAC
+            # key type disabled. Those dependencies don't really make sense.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9573
+            re.compile(r'.* !HMAC with HMAC'),
+        ],
+        'test_suite_psa_crypto_storage_format.current': [
+            PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE,
+        ],
+        'test_suite_psa_crypto_storage_format.v0': [
+            PSA_MECHANISM_NOT_IMPLEMENTED_SEARCH_RE,
+        ],
+        'tls13-misc': [
+            # Disabled due to OpenSSL bug.
+            # https://github.com/openssl/openssl/issues/10714
+            'TLS 1.3 O->m: resumption',
+            # Disabled due to OpenSSL command line limitation.
+            # https://github.com/Mbed-TLS/mbedtls/issues/9582
+            'TLS 1.3 m->O: resumption with early data',
+        ],
+    }
 
 
 # The names that we give to classes derived from DriverVSReference do not
diff --git a/tests/scripts/components-basic-checks.sh b/tests/scripts/components-basic-checks.sh
index 5ecd029..e9bfe5c 100644
--- a/tests/scripts/components-basic-checks.sh
+++ b/tests/scripts/components-basic-checks.sh
@@ -109,6 +109,9 @@
     # the test code and that's probably the most convenient way of achieving
     # the test's goal.
     echo "MBEDTLS_ASN1_WRITE_C" >> $expected
+    # No PSA equivalent - used in test_suite_psa_crypto to get some "known" size
+    # for raw key generation.
+    echo "MBEDTLS_CTR_DRBG_MAX_REQUEST" >> $expected
     # No PSA equivalent - we should probably have one in the future.
     echo "MBEDTLS_ECP_RESTARTABLE" >> $expected
     # No PSA equivalent - needed by some init tests
@@ -162,4 +165,3 @@
     msg "unit test: translate_ciphers.py"
     python3 -m unittest framework/scripts/translate_ciphers.py 2>&1
 }
-
diff --git a/tests/scripts/components-build-system.sh b/tests/scripts/components-build-system.sh
index a2c32f7..3047e76 100644
--- a/tests/scripts/components-build-system.sh
+++ b/tests/scripts/components-build-system.sh
@@ -135,7 +135,32 @@
     make
     ./cmake_package
     if [[ "$OSTYPE" == linux* ]]; then
-        PKG_CONFIG_PATH="${build_variant_dir}/mbedtls/pkgconfig" ${root_dir}/tests/scripts/pkgconfig.sh
+        PKG_CONFIG_PATH="${build_variant_dir}/mbedtls/pkgconfig" \
+        ${root_dir}/tests/scripts/pkgconfig.sh \
+        mbedtls mbedx509 mbedcrypto
+        # These are the EXPECTED package names. Renaming these could break
+        # consumers of pkg-config, consider carefully.
+    fi
+}
+
+component_test_tf_psa_crypto_cmake_as_package () {
+    # Remove existing generated files so that we use the ones CMake
+    # generates
+    make neat
+
+    msg "build: cmake 'as-package' build"
+    root_dir="$(pwd)"
+    cd tf-psa-crypto/programs/test/cmake_package
+    build_variant_dir="$(pwd)"
+    cmake .
+    make
+    ./cmake_package
+    if [[ "$OSTYPE" == linux* ]]; then
+        PKG_CONFIG_PATH="${build_variant_dir}/tf-psa-crypto/pkgconfig" \
+        ${root_dir}/tests/scripts/pkgconfig.sh \
+        tfpsacrypto
+        # This is the EXPECTED package name. Renaming it could break consumers
+        # of pkg-config, consider carefully.
     fi
 }
 
diff --git a/tests/scripts/components-compiler.sh b/tests/scripts/components-compiler.sh
index 5badabb..d89bbed 100644
--- a/tests/scripts/components-compiler.sh
+++ b/tests/scripts/components-compiler.sh
@@ -18,7 +18,7 @@
     cp configs/config-tfm.h "$CONFIG_H"
 
     msg "build: TF-M config, armclang armv7-m thumb2"
-    armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
+    helper_armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
 }
 
 test_build_opt () {
diff --git a/tests/scripts/components-configuration-crypto.sh b/tests/scripts/components-configuration-crypto.sh
index de8ab2d..5ce69b5 100644
--- a/tests/scripts/components-configuration-crypto.sh
+++ b/tests/scripts/components-configuration-crypto.sh
@@ -31,6 +31,25 @@
     make test
 }
 
+component_test_crypto_with_static_key_slots() {
+    msg "build: crypto full + MBEDTLS_PSA_STATIC_KEY_SLOTS"
+    scripts/config.py crypto_full
+    scripts/config.py set MBEDTLS_PSA_STATIC_KEY_SLOTS
+    # Intentionally set MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE to a value that
+    # is enough to contain:
+    # - all RSA public keys up to 4096 bits (max of PSA_VENDOR_RSA_MAX_KEY_BITS).
+    # - RSA key pairs up to 1024 bits, but not 2048 or larger.
+    # - all FFDH key pairs and public keys up to 8192 bits (max of PSA_VENDOR_FFDH_MAX_KEY_BITS).
+    # - all EC key pairs and public keys up to 521 bits (max of PSA_VENDOR_ECC_MAX_CURVE_BITS).
+    scripts/config.py set MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE 1212
+    # Disable the fully dynamic key store (default on) since it conflicts
+    # with the static behavior that we're testing here.
+    scripts/config.py unset MBEDTLS_PSA_KEY_STORE_DYNAMIC
+
+    msg "test: crypto full + MBEDTLS_PSA_STATIC_KEY_SLOTS"
+    make CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test
+}
+
 # check_renamed_symbols HEADER LIB
 # Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol
 # name in LIB.
@@ -56,6 +75,68 @@
     check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a
 }
 
+# The goal of this component is to build a configuration where:
+# - test code and libtestdriver1 can make use of calloc/free and
+# - core library (including PSA core) cannot use calloc/free.
+component_test_psa_crypto_without_heap() {
+    msg "crypto without heap: build libtestdriver1"
+    # Disable PSA features that cannot be accelerated and whose builtin support
+    # requires calloc/free.
+    scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_HKDF"
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_PBKDF2_"
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_TLS12_"
+    # RSA key support requires ASN1 parse/write support for testing, but ASN1
+    # is disabled below.
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_KEY_TYPE_RSA_"
+    scripts/config.py -f $CRYPTO_CONFIG_H unset-all "^PSA_WANT_ALG_RSA_"
+    # DES requires built-in support for key generation (parity check) so it
+    # cannot be accelerated
+    scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_DES
+    # EC-JPAKE use calloc/free in PSA core
+    scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_JPAKE
+
+    # Accelerate all PSA features (which are still enabled in CRYPTO_CONFIG_H).
+    PSA_SYM_LIST=$(./scripts/config.py -f $CRYPTO_CONFIG_H get-all-enabled PSA_WANT)
+    loc_accel_list=$(echo $PSA_SYM_LIST | sed 's/PSA_WANT_//g')
+
+    helper_libtestdriver1_adjust_config crypto
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    msg "crypto without heap: build main library"
+    # Disable all legacy MBEDTLS_xxx symbols.
+    scripts/config.py unset-all "^MBEDTLS_"
+    # Build the PSA core using the proper config file.
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_C
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+    # Enable fully-static key slots in PSA core.
+    scripts/config.py set MBEDTLS_PSA_STATIC_KEY_SLOTS
+    # Prevent PSA core from creating a copy of input/output buffers.
+    scripts/config.py set MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS
+    # Prevent PSA core from using CTR-DRBG or HMAC-DRBG for random generation.
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+    # Set calloc/free as null pointer functions. Calling them would crash
+    # the program so we can use this as a "sentinel" for being sure no module
+    # is making use of these functions in the library.
+    scripts/config.py set MBEDTLS_PLATFORM_C
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py set MBEDTLS_PLATFORM_STD_CALLOC   NULL
+    scripts/config.py set MBEDTLS_PLATFORM_STD_FREE     NULL
+
+    helper_libtestdriver1_make_main "$loc_accel_list" lib
+
+    msg "crypto without heap: build test suites and helpers"
+    # Reset calloc/free functions to normal operations so that test code can
+    # freely use them.
+    scripts/config.py unset MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py unset MBEDTLS_PLATFORM_STD_CALLOC
+    scripts/config.py unset MBEDTLS_PLATFORM_STD_FREE
+    helper_libtestdriver1_make_main "$loc_accel_list" tests
+
+    msg "crypto without heap: test"
+    make test
+}
+
 component_test_no_rsa_key_pair_generation () {
     msg "build: default config minus PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE"
     scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
@@ -545,62 +626,31 @@
 # depends.py family of tests
 component_test_depends_py_cipher_id () {
     msg "test/build: depends.py cipher_id (gcc)"
-    tests/scripts/depends.py cipher_id --unset-use-psa
+    tests/scripts/depends.py cipher_id
 }
 
 component_test_depends_py_cipher_chaining () {
     msg "test/build: depends.py cipher_chaining (gcc)"
-    tests/scripts/depends.py cipher_chaining --unset-use-psa
+    tests/scripts/depends.py cipher_chaining
 }
 
 component_test_depends_py_cipher_padding () {
     msg "test/build: depends.py cipher_padding (gcc)"
-    tests/scripts/depends.py cipher_padding --unset-use-psa
+    tests/scripts/depends.py cipher_padding
 }
 
 component_test_depends_py_curves () {
     msg "test/build: depends.py curves (gcc)"
-    tests/scripts/depends.py curves --unset-use-psa
+    tests/scripts/depends.py curves
 }
 
 component_test_depends_py_hashes () {
     msg "test/build: depends.py hashes (gcc)"
-    tests/scripts/depends.py hashes --unset-use-psa
+    tests/scripts/depends.py hashes
 }
 
 component_test_depends_py_pkalgs () {
     msg "test/build: depends.py pkalgs (gcc)"
-    tests/scripts/depends.py pkalgs --unset-use-psa
-}
-
-# PSA equivalents of the depends.py tests
-component_test_depends_py_cipher_id_psa () {
-    msg "test/build: depends.py cipher_id (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py cipher_id
-}
-
-component_test_depends_py_cipher_chaining_psa () {
-    msg "test/build: depends.py cipher_chaining (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py cipher_chaining
-}
-
-component_test_depends_py_cipher_padding_psa () {
-    msg "test/build: depends.py cipher_padding (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py cipher_padding
-}
-
-component_test_depends_py_curves_psa () {
-    msg "test/build: depends.py curves (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py curves
-}
-
-component_test_depends_py_hashes_psa () {
-    msg "test/build: depends.py hashes (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py hashes
-}
-
-component_test_depends_py_pkalgs_psa () {
-    msg "test/build: depends.py pkalgs (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
     tests/scripts/depends.py pkalgs
 }
 
@@ -2392,12 +2442,12 @@
     msg "AESCE, build with default configuration."
     scripts/config.py set MBEDTLS_AESCE_C
     scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
 
     msg "AESCE, build AESCE only"
     scripts/config.py set MBEDTLS_AESCE_C
     scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
 }
 
 component_test_aes_only_128_bit_keys () {
@@ -2601,7 +2651,7 @@
     # test AESCE baremetal build
     scripts/config.py set MBEDTLS_AESCE_C
     msg "build: default config + BLOCK_CIPHER_NO_DECRYPT with AESCE"
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra"
 
     # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
     not grep mbedtls_aes_setkey_dec ${BUILTIN_SRC_PATH}/aes.o
@@ -2744,5 +2794,3 @@
     msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s
     make test
 }
-
-
diff --git a/tests/scripts/components-configuration-tls.sh b/tests/scripts/components-configuration-tls.sh
index e1d33ad..b8834d6 100644
--- a/tests/scripts/components-configuration-tls.sh
+++ b/tests/scripts/components-configuration-tls.sh
@@ -721,11 +721,6 @@
 
 component_test_depends_py_kex () {
     msg "test/build: depends.py kex (gcc)"
-    tests/scripts/depends.py kex --unset-use-psa
-}
-
-component_test_depends_py_kex_psa () {
-    msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
     tests/scripts/depends.py kex
 }
 
diff --git a/tests/scripts/components-platform.sh b/tests/scripts/components-platform.sh
index 4e12883..fd858a7 100644
--- a/tests/scripts/components-platform.sh
+++ b/tests/scripts/components-platform.sh
@@ -468,32 +468,32 @@
     # Compile mostly with -O1 since some Arm inline assembly is disabled for -O0.
 
     # ARM Compiler 6 - Target ARMv7-A
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a"
 
     # ARM Compiler 6 - Target ARMv7-M
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m"
 
     # ARM Compiler 6 - Target ARMv7-M+DSP
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp"
 
     # ARM Compiler 6 - Target ARMv8-A - AArch32
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a"
 
     # ARM Compiler 6 - Target ARMv8-M
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main"
+    helper_armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main"
 
     # ARM Compiler 6 - Target Cortex-M0 - no optimisation
-    armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0"
+    helper_armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0"
 
     # ARM Compiler 6 - Target Cortex-M0
-    armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0"
+    helper_armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0"
 
     # ARM Compiler 6 - Target ARMv8.2-A - AArch64
     #
     # Re-enable MBEDTLS_AESCE_C as this should be supported by the version of armclang
     # that we have in our CI
     scripts/config.py set MBEDTLS_AESCE_C
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto"
+    helper_armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto"
 }
 
 support_build_armcc () {
diff --git a/tests/scripts/depends.py b/tests/scripts/depends.py
index 5098099..5eddaae 100755
--- a/tests/scripts/depends.py
+++ b/tests/scripts/depends.py
@@ -47,7 +47,6 @@
 import argparse
 import os
 import re
-import shutil
 import subprocess
 import sys
 import traceback
@@ -56,6 +55,7 @@
 # Add the Mbed TLS Python library directory to the module search path
 import scripts_path # pylint: disable=unused-import
 import config
+from mbedtls_framework import c_build_helper
 
 class Colors: # pylint: disable=too-few-public-methods
     """Minimalistic support for colored output.
@@ -99,24 +99,6 @@
 cmd is a list of strings: a command name and its arguments."""
     log_line(' '.join(cmd), prefix='+')
 
-def backup_config(options):
-    """Back up the library configuration file (mbedtls_config.h).
-If the backup file already exists, it is presumed to be the desired backup,
-so don't make another backup."""
-    if os.path.exists(options.config_backup):
-        options.own_backup = False
-    else:
-        options.own_backup = True
-        shutil.copy(options.config, options.config_backup)
-
-def restore_config(options):
-    """Restore the library configuration file (mbedtls_config.h).
-Remove the backup file if it was saved earlier."""
-    if options.own_backup:
-        shutil.move(options.config_backup, options.config)
-    else:
-        shutil.copy(options.config_backup, options.config)
-
 def option_exists(conf, option):
     return option in conf.settings
 
@@ -139,7 +121,7 @@
         conf.set(option, value)
     return True
 
-def set_reference_config(conf, options, colors):
+def set_reference_config(conf, colors):
     """Change the library configuration file (mbedtls_config.h) to the reference state.
 The reference state is the one from which the tested configurations are
 derived."""
@@ -147,9 +129,6 @@
     log_command(['config.py', 'full'])
     conf.adapt(config.full_adapter)
     set_config_option_value(conf, 'MBEDTLS_TEST_HOOKS', colors, False)
-    set_config_option_value(conf, 'MBEDTLS_PSA_CRYPTO_CONFIG', colors, False)
-    if options.unset_use_psa:
-        set_config_option_value(conf, 'MBEDTLS_USE_PSA_CRYPTO', colors, False)
 
 class Job:
     """A job builds the library in a specific configuration and runs some tests."""
@@ -179,15 +158,57 @@
         else:
             log_line('starting ' + self.name, color=colors.cyan)
 
-    def configure(self, conf, options, colors):
+    def configure(self, conf, colors):
         '''Set library configuration options as required for the job.'''
-        set_reference_config(conf, options, colors)
+        set_reference_config(conf, colors)
         for key, value in sorted(self.config_settings.items()):
             ret = set_config_option_value(conf, key, colors, value)
             if ret is False:
                 return False
         return True
 
+    def _consistency_check(self):
+        '''Check if the testable option is consistent with the goal.
+
+        The purpose of this function to ensure that every option is set or unset according to
+        the settings.
+        '''
+        log_command(['consistency check'])
+        c_name = None
+        exe_name = None
+        header = '#include "mbedtls/build_info.h"\n'
+
+        # Generate a C error directive for each setting to test if it is active
+        for option, value in sorted(self.config_settings.items()):
+            header += '#if '
+            if value:
+                header += '!'
+            header += f'defined({option})\n'
+            header += f'#error "{option}"\n'
+            header += '#endif\n'
+        include_path = ['include', 'tf-psa-crypto/include',
+                        'tf-psa-crypto/drivers/builtin/include']
+
+        try:
+            # Generate a C file, build and run it
+            c_file, c_name, exe_name = c_build_helper.create_c_file(self.name)
+            c_build_helper.generate_c_file(c_file, 'depends.py', header, lambda x: '')
+            c_file.close()
+            c_build_helper.compile_c_file(c_name, exe_name, include_path)
+            return True
+
+        except c_build_helper.CompileError as e:
+            # Read the command line output to find out which setting has been failed
+            failed = {m.group(1) for m in re.finditer('.*#error "(.*)"', e.message) if m}
+            log_line('Inconsistent config option(s):')
+            for option in sorted(failed):
+                log_line('  ' + option)
+            return False
+
+        finally:
+            c_build_helper.remove_file_if_exists(c_name)
+            c_build_helper.remove_file_if_exists(exe_name)
+
     def test(self, options):
         '''Run the job's build and test commands.
 Return True if all the commands succeed and False otherwise.
@@ -195,6 +216,8 @@
 run all the commands, except that if the first command fails, none of the
 other commands are run (typically, the first command is a build command
 and subsequent commands are tests that cannot run if the build failed).'''
+        if not self._consistency_check():
+            return False
         built = False
         success = True
         for command in self.commands:
@@ -214,54 +237,118 @@
 
 # If the configuration option A requires B, make sure that
 # B in REVERSE_DEPENDENCIES[A].
-# All the information here should be contained in check_config.h. This
-# file includes a copy because it changes rarely and it would be a pain
+# All the information here should be contained in check_config.h or check_crypto_config.h.
+# This file includes a copy because it changes rarely and it would be a pain
 # to extract automatically.
 REVERSE_DEPENDENCIES = {
     'MBEDTLS_AES_C': ['MBEDTLS_CTR_DRBG_C',
-                      'MBEDTLS_NIST_KW_C'],
-    'MBEDTLS_CHACHA20_C': ['MBEDTLS_CHACHAPOLY_C'],
+                      'MBEDTLS_NIST_KW_C',
+                      'PSA_WANT_KEY_TYPE_AES',
+                      'PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128'],
+    'MBEDTLS_ARIA_C': ['PSA_WANT_KEY_TYPE_ARIA'],
+    'MBEDTLS_CAMELLIA_C': ['PSA_WANT_KEY_TYPE_CAMELLIA'],
+    'MBEDTLS_CCM_C': ['PSA_WANT_ALG_CCM',
+                      'PSA_WANT_ALG_CCM_STAR_NO_TAG'],
+    'MBEDTLS_CHACHA20_C': ['MBEDTLS_CHACHAPOLY_C',
+                           'PSA_WANT_KEY_TYPE_CHACHA20',
+                           'PSA_WANT_ALG_CHACHA20_POLY1305',
+                           'PSA_WANT_ALG_STREAM_CIPHER'],
+    'MBEDTLS_CMAC_C': ['PSA_WANT_ALG_CMAC',
+                       'PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128'],
+    'MBEDTLS_DES_C': ['PSA_WANT_KEY_TYPE_DES'],
+    'MBEDTLS_GCM_C': ['PSA_WANT_ALG_GCM'],
+
+    'MBEDTLS_CIPHER_MODE_CBC': ['PSA_WANT_ALG_CBC_PKCS7',
+                                'PSA_WANT_ALG_CBC_NO_PADDING'],
+    'MBEDTLS_CIPHER_MODE_CFB': ['PSA_WANT_ALG_CFB'],
+    'MBEDTLS_CIPHER_MODE_CTR': ['PSA_WANT_ALG_CTR'],
+    'MBEDTLS_CIPHER_MODE_OFB': ['PSA_WANT_ALG_OFB'],
+
+    'MBEDTLS_CIPHER_PADDING_PKCS7': ['MBEDTLS_PKCS5_C',
+                                     'MBEDTLS_PKCS12_C',
+                                     'PSA_WANT_ALG_CBC_PKCS7'],
+
+    'MBEDTLS_ECP_DP_BP256R1_ENABLED': ['PSA_WANT_ECC_BRAINPOOL_P_R1_256'],
+    'MBEDTLS_ECP_DP_BP384R1_ENABLED': ['PSA_WANT_ECC_BRAINPOOL_P_R1_384'],
+    'MBEDTLS_ECP_DP_BP512R1_ENABLED': ['PSA_WANT_ECC_BRAINPOOL_P_R1_512'],
+    'MBEDTLS_ECP_DP_CURVE25519_ENABLED': ['PSA_WANT_ECC_MONTGOMERY_255'],
+    'MBEDTLS_ECP_DP_CURVE448_ENABLED': ['PSA_WANT_ECC_MONTGOMERY_448'],
+    'MBEDTLS_ECP_DP_SECP192R1_ENABLED': ['PSA_WANT_ECC_SECP_R1_192'],
+    'MBEDTLS_ECP_DP_SECP224R1_ENABLED': ['PSA_WANT_ECC_SECP_R1_224'],
+    'MBEDTLS_ECP_DP_SECP256R1_ENABLED': ['PSA_WANT_ECC_SECP_R1_256',
+                                         'PSA_WANT_ALG_JPAKE',
+                                         'MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED'],
+    'MBEDTLS_ECP_DP_SECP384R1_ENABLED': ['PSA_WANT_ECC_SECP_R1_384'],
+    'MBEDTLS_ECP_DP_SECP512R1_ENABLED': ['PSA_WANT_ECC_SECP_R1_512'],
+    'MBEDTLS_ECP_DP_SECP521R1_ENABLED': ['PSA_WANT_ECC_SECP_R1_521'],
+    'MBEDTLS_ECP_DP_SECP192K1_ENABLED': ['PSA_WANT_ECC_SECP_K1_192'],
+    'MBEDTLS_ECP_DP_SECP256K1_ENABLED': ['PSA_WANT_ECC_SECP_K1_256'],
+
     'MBEDTLS_ECDSA_C': ['MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED',
-                        'MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED'],
+                        'MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED',
+                        'PSA_WANT_ALG_ECDSA',
+                        'PSA_WANT_ALG_DETERMINISTIC_ECDSA'],
     'MBEDTLS_ECP_C': ['MBEDTLS_ECDSA_C',
-                      'MBEDTLS_ECDH_C',
+                      'MBEDTLS_ECDH_C', 'PSA_WANT_ALG_ECDH',
                       'MBEDTLS_ECJPAKE_C',
                       'MBEDTLS_ECP_RESTARTABLE',
                       'MBEDTLS_PK_PARSE_EC_EXTENDED',
                       'MBEDTLS_PK_PARSE_EC_COMPRESSED',
-                      'MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED',
                       'MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED',
                       'MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED',
                       'MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED',
-                      'MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED',
-                      'MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED',
                       'MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED',
-                      'MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED'],
-    'MBEDTLS_ECP_DP_SECP256R1_ENABLED': ['MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED'],
-    'MBEDTLS_PKCS1_V21': ['MBEDTLS_X509_RSASSA_PSS_SUPPORT'],
+                      'MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED',
+                      'PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY',
+                      'PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC',
+                      'PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT',
+                      'PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT',
+                      'PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE',
+                      'PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE'],
+    'MBEDTLS_ECJPAKE_C': ['MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED',
+                          'PSA_WANT_ALG_JPAKE'],
+    'MBEDTLS_PKCS1_V21': ['MBEDTLS_X509_RSASSA_PSS_SUPPORT',
+                          'PSA_WANT_ALG_RSA_OAEP',
+                          'PSA_WANT_ALG_RSA_PSS'],
     'MBEDTLS_PKCS1_V15': ['MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED',
                           'MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED',
                           'MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED',
-                          'MBEDTLS_KEY_EXCHANGE_RSA_ENABLED'],
-    'MBEDTLS_RSA_C': ['MBEDTLS_X509_RSASSA_PSS_SUPPORT',
-                      'MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED',
-                      'MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED',
-                      'MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED',
-                      'MBEDTLS_KEY_EXCHANGE_RSA_ENABLED',
-                      'MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED'],
+                          'MBEDTLS_KEY_EXCHANGE_RSA_ENABLED',
+                          'PSA_WANT_ALG_RSA_PKCS1V15_CRYPT',
+                          'PSA_WANT_ALG_RSA_PKCS1V15_SIGN'],
+    'MBEDTLS_RSA_C': ['MBEDTLS_PKCS1_V15',
+                      'MBEDTLS_PKCS1_V21',
+                      'MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED',
+                      'PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY',
+                      'PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC',
+                      'PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT',
+                      'PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT',
+                      'PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE'],
+
+    'MBEDTLS_MD5_C' : ['PSA_WANT_ALG_MD5'],
+    'MBEDTLS_RIPEMD160_C' : ['PSA_WANT_ALG_RIPEMD160'],
+    'MBEDTLS_SHA1_C' : ['PSA_WANT_ALG_SHA_1'],
+    'MBEDTLS_SHA224_C': ['MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED',
+                         'MBEDTLS_ENTROPY_FORCE_SHA256',
+                         'MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT',
+                         'MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY',
+                         'PSA_WANT_ALG_SHA_224'],
     'MBEDTLS_SHA256_C': ['MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED',
                          'MBEDTLS_ENTROPY_FORCE_SHA256',
                          'MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT',
                          'MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY',
                          'MBEDTLS_LMS_C',
-                         'MBEDTLS_LMS_PRIVATE'],
+                         'MBEDTLS_LMS_PRIVATE',
+                         'PSA_WANT_ALG_SHA_256',
+                         'PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS'],
+    'MBEDTLS_SHA384_C' : ['PSA_WANT_ALG_SHA_384'],
     'MBEDTLS_SHA512_C': ['MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT',
-                         'MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY'],
-    'MBEDTLS_SHA224_C': ['MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED',
-                         'MBEDTLS_ENTROPY_FORCE_SHA256',
-                         'MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT',
-                         'MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY'],
-    'MBEDTLS_X509_RSASSA_PSS_SUPPORT': []
+                         'MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY',
+                         'PSA_WANT_ALG_SHA_512'],
+    'MBEDTLS_SHA3_C' : ['PSA_WANT_ALG_SHA3_224',
+                        'PSA_WANT_ALG_SHA3_256',
+                        'PSA_WANT_ALG_SHA3_384',
+                        'PSA_WANT_ALG_SHA3_512'],
 }
 
 # If an option is tested in an exclusive test, alter the following defines.
@@ -272,19 +359,20 @@
                          '-MBEDTLS_SSL_TLS_C'],
     'MBEDTLS_ECP_DP_CURVE448_ENABLED': ['-MBEDTLS_ECDSA_C',
                                         '-MBEDTLS_ECDSA_DETERMINISTIC',
-                                        '-MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED',
-                                        '-MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED',
-                                        '-MBEDTLS_ECJPAKE_C',
-                                        '-MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED'],
+                                        '-MBEDTLS_ECJPAKE_C',],
     'MBEDTLS_ECP_DP_CURVE25519_ENABLED': ['-MBEDTLS_ECDSA_C',
                                           '-MBEDTLS_ECDSA_DETERMINISTIC',
-                                          '-MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED',
-                                          '-MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED',
-                                          '-MBEDTLS_ECJPAKE_C',
-                                          '-MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED'],
-    'MBEDTLS_ARIA_C': ['-MBEDTLS_CMAC_C'],
+                                          '-MBEDTLS_ECJPAKE_C'],
+    'MBEDTLS_ARIA_C': ['-MBEDTLS_CMAC_C',
+                       '-MBEDTLS_CCM_C',
+                       '-MBEDTLS_GCM_C',
+                       '-MBEDTLS_SSL_TICKET_C',
+                       '-MBEDTLS_SSL_CONTEXT_SERIALIZATION'],
     'MBEDTLS_CAMELLIA_C': ['-MBEDTLS_CMAC_C'],
-    'MBEDTLS_CHACHA20_C': ['-MBEDTLS_CMAC_C', '-MBEDTLS_CCM_C', '-MBEDTLS_GCM_C'],
+    'MBEDTLS_CHACHA20_C': ['-MBEDTLS_CMAC_C',
+                           '-MBEDTLS_CCM_C',
+                           '-MBEDTLS_GCM_C',
+                           '-PSA_WANT_ALG_ECB_NO_PADDING'],
     'MBEDTLS_DES_C': ['-MBEDTLS_CCM_C',
                       '-MBEDTLS_GCM_C',
                       '-MBEDTLS_SSL_TICKET_C',
@@ -300,12 +388,23 @@
 
 def turn_off_dependencies(config_settings):
     """For every option turned off config_settings, also turn off what depends on it.
-An option O is turned off if config_settings[O] is False."""
+
+    An option O is turned off if config_settings[O] is False.
+    Handle the dependencies recursively.
+    """
     for key, value in sorted(config_settings.items()):
         if value is not False:
             continue
-        for dep in REVERSE_DEPENDENCIES.get(key, []):
+
+        # Save the processed settings to handle cross referencies
+        revdep = set(REVERSE_DEPENDENCIES.get(key, []))
+        history = set()
+        while revdep:
+            dep = revdep.pop()
+            history.add(dep)
             config_settings[dep] = False
+            # Do not add symbols which are already processed
+            revdep.update(set(REVERSE_DEPENDENCIES.get(dep, [])) - history)
 
 class BaseDomain: # pylint: disable=too-few-public-methods, unused-argument
     """A base class for all domains."""
@@ -451,7 +550,7 @@
     """Run the specified job (a Job instance)."""
     subprocess.check_call([options.make_command, 'clean'])
     job.announce(colors, None)
-    if not job.configure(conf, options, colors):
+    if not job.configure(conf, colors):
         job.announce(colors, False)
         return False
     conf.write()
@@ -464,15 +563,13 @@
 domain_data should be a DomainData instance that describes the available
 domains and jobs.
 Run the jobs listed in options.tasks."""
-    if not hasattr(options, 'config_backup'):
-        options.config_backup = options.config + '.bak'
     colors = Colors(options)
     jobs = []
     failures = []
     successes = []
     for name in options.tasks:
         jobs += domain_data.get_jobs(name)
-    backup_config(options)
+    conf.backup()
     try:
         for job in jobs:
             success = run(options, job, conf, colors=colors)
@@ -483,13 +580,13 @@
                     return False
             else:
                 successes.append(job.name)
-        restore_config(options)
+        conf.restore()
     except:
         # Restore the configuration, except in stop-on-error mode if there
         # was an error, where we leave the failing configuration up for
         # developer convenience.
         if options.keep_going:
-            restore_config(options)
+            conf.restore()
         raise
     if successes:
         log_line('{} passed'.format(' '.join(successes)), color=colors.bold_green)
@@ -514,7 +611,10 @@
                             choices=['always', 'auto', 'never'], default='auto')
         parser.add_argument('-c', '--config', metavar='FILE',
                             help='Configuration file to modify',
-                            default='include/mbedtls/mbedtls_config.h')
+                            default=config.MbedTLSConfigFile.default_path[0])
+        parser.add_argument('-r', '--crypto-config', metavar='FILE',
+                            help='Crypto configuration file to modify',
+                            default=config.CryptoConfigFile.default_path[0])
         parser.add_argument('-C', '--directory', metavar='DIR',
                             help='Change to this directory before anything else',
                             default='.')
@@ -533,15 +633,13 @@
         parser.add_argument('--make-command', metavar='CMD',
                             help='Command to run instead of make (e.g. gmake)',
                             action='store', default='make')
-        parser.add_argument('--unset-use-psa',
-                            help='Unset MBEDTLS_USE_PSA_CRYPTO before any test',
-                            action='store_true', dest='unset_use_psa')
         parser.add_argument('tasks', metavar='TASKS', nargs='*',
                             help='The domain(s) or job(s) to test (default: all).',
                             default=True)
         options = parser.parse_args()
         os.chdir(options.directory)
-        conf = config.MbedTLSConfig(options.config)
+        conf = config.CombinedConfig(config.MbedTLSConfigFile(options.config),
+                                     config.CryptoConfigFile(options.crypto_config))
         domain_data = DomainData(options, conf)
 
         if options.tasks is True:
diff --git a/tests/scripts/pkgconfig.sh b/tests/scripts/pkgconfig.sh
index 2702bfa..07a73b3 100755
--- a/tests/scripts/pkgconfig.sh
+++ b/tests/scripts/pkgconfig.sh
@@ -18,11 +18,14 @@
 
 set -e -u
 
-# These are the EXPECTED package names. Renaming these could break
-# consumers of pkg-config, consider carefully.
-all_pcs="mbedtls mbedx509 mbedcrypto"
+if [ $# -le 0 ]
+then
+    echo " [!] No package names specified" >&2
+    echo "Usage: $0 <package name 1> <package name 2> ..." >&2
+    exit 1
+fi
 
-for pc in $all_pcs; do
+for pc in "$@"; do
     printf "testing package config file: ${pc} ... "
     pkg-config --validate "${pc}"
     version="$(pkg-config --modversion "${pc}")"
diff --git a/tests/suites/test_suite_ssl.data b/tests/suites/test_suite_ssl.data
index 358d7c2..c522459 100644
--- a/tests/suites/test_suite_ssl.data
+++ b/tests/suites/test_suite_ssl.data
@@ -565,7 +565,7 @@
 handshake_ciphersuite_select:"TLS-ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384":MBEDTLS_PK_ECDSA:"":PSA_ALG_ECDSA(PSA_ALG_ANY_HASH):PSA_ALG_ECDH:PSA_KEY_USAGE_SIGN_HASH|PSA_KEY_USAGE_DERIVE:0:MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
 
 Handshake, select ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384, opaque, PSA_ALG_SHA_384
-depends_on:PSA_WANT_ALG_SHA_384:PSA_WANT_KEY_TYPE_CAMELLIA:PSA_WANT_ALG_CBC_NO_PADDING:PSA_WANT_ECC_SECP_R1_256:PSA_WANT_ECC_SECP_R1_384:MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED:MBEDTLS_USE_PSA_CRYPTO:MBEDTSL_PSA_CRYPTO_C
+depends_on:PSA_WANT_ALG_SHA_384:PSA_WANT_KEY_TYPE_CAMELLIA:PSA_WANT_ALG_CBC_NO_PADDING:PSA_WANT_ECC_SECP_R1_256:PSA_WANT_ECC_SECP_R1_384:MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED:MBEDTLS_USE_PSA_CRYPTO:MBEDTLS_PSA_CRYPTO_C
 handshake_ciphersuite_select:"TLS-ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384":MBEDTLS_PK_ECDSA:"":PSA_ALG_ECDSA(PSA_ALG_SHA_384):PSA_ALG_ECDH:PSA_KEY_USAGE_SIGN_HASH|PSA_KEY_USAGE_DERIVE:0:MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
 
 Handshake, select ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384, opaque, missing alg
diff --git a/tf-psa-crypto/CMakeLists.txt b/tf-psa-crypto/CMakeLists.txt
index 63a71fc..21eb64e 100644
--- a/tf-psa-crypto/CMakeLists.txt
+++ b/tf-psa-crypto/CMakeLists.txt
@@ -33,10 +33,6 @@
 
 if(NOT (CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR))
 
-if(LIB_INSTALL_DIR)
-    set(CMAKE_INSTALL_LIBDIR "${LIB_INSTALL_DIR}")
-endif()
-
 set(TF_PSA_CRYPTO_PYTHON_EXECUTABLE ${MBEDTLS_PYTHON_EXECUTABLE})
 set(USE_STATIC_TF_PSA_CRYPTO_LIBRARY ${USE_STATIC_MBEDTLS_LIBRARY})
 set(USE_SHARED_TF_PSA_CRYPTO_LIBRARY ${USE_SHARED_MBEDTLS_LIBRARY})
@@ -57,15 +53,18 @@
 
 else(NOT (CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR))
 
+set(TF_PSA_CRYPTO_VERSION 0.1.0)
+set(TF_PSA_CRYPTO_SOVERSION 0)
+
 if(TEST_CPP)
     project("TF-PSA-Crypto"
         LANGUAGES C CXX
-        VERSION 0.1.0
+        VERSION ${TF_PSA_CRYPTO_VERSION}
     )
 else()
     project("TF-PSA-Crypto"
         LANGUAGES C
-        VERSION 0.1.0
+        VERSION ${TF_PSA_CRYPTO_VERSION}
     )
 endif()
 
diff --git a/tf-psa-crypto/TF-PSA-Crypto.cmake b/tf-psa-crypto/TF-PSA-Crypto.cmake
index e520ad1..b96dab2 100644
--- a/tf-psa-crypto/TF-PSA-Crypto.cmake
+++ b/tf-psa-crypto/TF-PSA-Crypto.cmake
@@ -1,3 +1,4 @@
+include(CMakePackageConfigHelpers)
 include(GNUInstallDirs)
 
 # Determine if TF-PSA-Crypto is being built as a subproject using add_subdirectory()
@@ -13,6 +14,19 @@
 set(MBEDTLS_DIR ${CMAKE_CURRENT_SOURCE_DIR}/..)
 set(MBEDTLS_FRAMEWORK_DIR ${CMAKE_CURRENT_SOURCE_DIR}/../framework)
 
+# Put the version numbers into relevant files
+set(version_number_files
+        doxygen/input/doc_mainpage.h
+        doxygen/tfpsacrypto.doxyfile)
+foreach(file ${version_number_files})
+    configure_file(${file}.in
+                   ${TF_PSA_CRYPTO_DIR}/${file})
+endforeach(file)
+
+ADD_CUSTOM_TARGET(${TF_PSA_CRYPTO_TARGET_PREFIX}apidoc
+    COMMAND doxygen tfpsacrypto.doxyfile
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/doxygen)
+
 option(ENABLE_PROGRAMS "Build TF-PSA-Crypto programs." ON)
 
 option(UNSAFE_BUILD "Allow unsafe builds. These builds ARE NOT SECURE." OFF)
@@ -27,7 +41,7 @@
 endif()
 
 # Support for package config and install to be added later.
-option(DISABLE_PACKAGE_CONFIG_AND_INSTALL "Disable package configuration, target export and installation" ON)
+option(DISABLE_PACKAGE_CONFIG_AND_INSTALL "Disable package configuration, target export and installation" ${TF_PSA_CRYPTO_AS_SUBPROJECT})
 
 if (CMAKE_C_SIMULATE_ID)
     set(COMPILER_ID ${CMAKE_C_SIMULATE_ID})
@@ -101,7 +115,7 @@
 find_package(Threads)
 
 # If this is the root project add longer list of available CMAKE_BUILD_TYPE values
-if(CMAKE_SOURCE_DIR STREQUAL CMAKE_CURRENT_SOURCE_DIR)
+if(NOT TF_PSA_CRYPTO_AS_SUBPROJECT)
     set(CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE}
         CACHE STRING "Choose the type of build: None Debug Release Coverage ASan ASanDbg MemSan MemSanDbg Check CheckFull TSan TSanDbg"
         FORCE)
@@ -261,10 +275,6 @@
     endif(CMAKE_COMPILER_IS_GNU OR CMAKE_COMPILER_IS_CLANG)
 endif(CMAKE_BUILD_TYPE STREQUAL "Coverage")
 
-if(LIB_INSTALL_DIR)
-    set(CMAKE_INSTALL_LIBDIR "${LIB_INSTALL_DIR}")
-endif()
-
 if (NOT EXISTS "${MBEDTLS_FRAMEWORK_DIR}/CMakeLists.txt")
     message(FATAL_ERROR "${MBEDTLS_FRAMEWORK_DIR}/CMakeLists.txt not found. Run `git submodule update --init` from the source tree to fetch the submodule contents.")
 endif()
@@ -272,6 +282,7 @@
 add_subdirectory(include)
 add_subdirectory(core)
 add_subdirectory(drivers)
+add_subdirectory(pkgconfig)
 
 #
 # The C files in tests/src directory contain test code shared among test suites
@@ -356,6 +367,17 @@
 
     # additional convenience targets for Unix only
     if(UNIX)
+        # For coverage testing:
+        # 1. Build with:
+        #         cmake -D CMAKE_BUILD_TYPE=Coverage /path/to/source && make
+        # 2. Run the relevant tests for the part of the code you're interested in.
+        #    For the reference coverage measurement, see
+        #    tests/scripts/basic-build-test.sh
+        # 3. Run scripts/lcov.sh to generate an HTML report.
+        ADD_CUSTOM_TARGET(lcov
+            COMMAND ${MBEDTLS_DIR}/scripts/lcov.sh
+        )
+
         ADD_CUSTOM_TARGET(memcheck
             COMMAND sed -i.bak s+/usr/bin/valgrind+`which valgrind`+ DartConfiguration.tcl
             COMMAND ctest -O memcheck.log -D ExperimentalMemCheck
@@ -374,3 +396,39 @@
                     ${CMAKE_CURRENT_BINARY_DIR}/DartConfiguration.tcl COPYONLY)
     endif()
 endif()
+
+if(NOT DISABLE_PACKAGE_CONFIG_AND_INSTALL)
+    configure_package_config_file(
+        "cmake/TF-PSA-CryptoConfig.cmake.in"
+        "cmake/TF-PSA-CryptoConfig.cmake"
+            INSTALL_DESTINATION "cmake")
+
+    write_basic_package_version_file(
+        "cmake/TF-PSA-CryptoConfigVersion.cmake"
+            COMPATIBILITY SameMajorVersion
+            VERSION 0.1.0)
+
+    install(
+        FILES "${CMAKE_CURRENT_BINARY_DIR}/cmake/TF-PSA-CryptoConfig.cmake"
+              "${CMAKE_CURRENT_BINARY_DIR}/cmake/TF-PSA-CryptoConfigVersion.cmake"
+        DESTINATION "${CMAKE_INSTALL_LIBDIR}/cmake/TF-PSA-Crypto")
+
+    export(
+        EXPORT MbedTLSTargets
+        NAMESPACE TF-PSA-Crypto::
+        FILE "cmake/TF-PSA-CryptoTargets.cmake")
+
+    install(
+        EXPORT MbedTLSTargets
+        NAMESPACE TF-PSA-Crypto::
+        DESTINATION "${CMAKE_INSTALL_LIBDIR}/cmake/TF-PSA-Crypto"
+        FILE "TF-PSA-CryptoTargets.cmake")
+
+    if(CMAKE_VERSION VERSION_GREATER 3.15 OR CMAKE_VERSION VERSION_EQUAL 3.15)
+        # Do not export the package by default
+        cmake_policy(SET CMP0090 NEW)
+
+        # Make this package visible to the system
+        export(PACKAGE TF-PSA-Crypto)
+    endif()
+endif()
diff --git a/tf-psa-crypto/cmake/.gitignore b/tf-psa-crypto/cmake/.gitignore
new file mode 100644
index 0000000..fc85262
--- /dev/null
+++ b/tf-psa-crypto/cmake/.gitignore
@@ -0,0 +1 @@
+TF-PSA-CryptoConfig.cmake
diff --git a/tf-psa-crypto/cmake/TF-PSA-CryptoConfig.cmake.in b/tf-psa-crypto/cmake/TF-PSA-CryptoConfig.cmake.in
new file mode 100644
index 0000000..94a9195
--- /dev/null
+++ b/tf-psa-crypto/cmake/TF-PSA-CryptoConfig.cmake.in
@@ -0,0 +1,3 @@
+@PACKAGE_INIT@
+
+include("${CMAKE_CURRENT_LIST_DIR}/TF-PSA-CryptoTargets.cmake")
diff --git a/tf-psa-crypto/core/psa_crypto.c b/tf-psa-crypto/core/psa_crypto.c
index 3d859f1..32a52de 100644
--- a/tf-psa-crypto/core/psa_crypto.c
+++ b/tf-psa-crypto/core/psa_crypto.c
@@ -705,6 +705,11 @@
 psa_status_t psa_allocate_buffer_to_slot(psa_key_slot_t *slot,
                                          size_t buffer_length)
 {
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+    if (buffer_length > ((size_t) MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE)) {
+        return PSA_ERROR_NOT_SUPPORTED;
+    }
+#else
     if (slot->key.data != NULL) {
         return PSA_ERROR_ALREADY_EXISTS;
     }
@@ -713,6 +718,7 @@
     if (slot->key.data == NULL) {
         return PSA_ERROR_INSUFFICIENT_MEMORY;
     }
+#endif
 
     slot->key.bytes = buffer_length;
     return PSA_SUCCESS;
@@ -1177,11 +1183,18 @@
 
 psa_status_t psa_remove_key_data_from_memory(psa_key_slot_t *slot)
 {
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+    if (slot->key.bytes > 0) {
+        mbedtls_platform_zeroize(slot->key.data, MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE);
+    }
+#else
     if (slot->key.data != NULL) {
         mbedtls_zeroize_and_free(slot->key.data, slot->key.bytes);
     }
 
     slot->key.data = NULL;
+#endif /* MBEDTLS_PSA_STATIC_KEY_SLOTS */
+
     slot->key.bytes = 0;
 
     return PSA_SUCCESS;
@@ -2096,7 +2109,7 @@
      * storage ( thus not in the case of importing a key in a secure element
      * with storage ( MBEDTLS_PSA_CRYPTO_SE_C ) ),we have to allocate a
      * buffer to hold the imported key material. */
-    if (slot->key.data == NULL) {
+    if (slot->key.bytes == 0) {
         if (psa_key_lifetime_is_external(attributes->lifetime)) {
             status = psa_driver_wrapper_get_key_buffer_size_from_key_data(
                 attributes, data, data_length, &storage_size);
@@ -8030,7 +8043,7 @@
      * storage ( thus not in the case of generating a key in a secure element
      * with storage ( MBEDTLS_PSA_CRYPTO_SE_C ) ),we have to allocate a
      * buffer to hold the generated key material. */
-    if (slot->key.data == NULL) {
+    if (slot->key.bytes == 0) {
         if (PSA_KEY_LIFETIME_GET_LOCATION(attributes->lifetime) ==
             PSA_KEY_LOCATION_LOCAL_STORAGE) {
             status = psa_validate_key_type_and_size_for_key_generation(
diff --git a/tf-psa-crypto/core/psa_crypto_core.h b/tf-psa-crypto/core/psa_crypto_core.h
index 21e7559..df0ee50 100644
--- a/tf-psa-crypto/core/psa_crypto_core.h
+++ b/tf-psa-crypto/core/psa_crypto_core.h
@@ -155,7 +155,11 @@
     /* Dynamically allocated key data buffer.
      * Format as specified in psa_export_key(). */
     struct key_data {
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+        uint8_t data[MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE];
+#else
         uint8_t *data;
+#endif
         size_t bytes;
     } key;
 } psa_key_slot_t;
diff --git a/tf-psa-crypto/core/psa_crypto_storage.h b/tf-psa-crypto/core/psa_crypto_storage.h
index d7f5b18..433ecdc 100644
--- a/tf-psa-crypto/core/psa_crypto_storage.h
+++ b/tf-psa-crypto/core/psa_crypto_storage.h
@@ -21,9 +21,16 @@
 #include <stdint.h>
 #include <string.h>
 
-/* Limit the maximum key size in storage. This should have no effect
- * since the key size is limited in memory. */
+/* Limit the maximum key size in storage. */
+#if defined(MBEDTLS_PSA_STATIC_KEY_SLOTS)
+/* Reflect the maximum size for the key buffer. */
+#define PSA_CRYPTO_MAX_STORAGE_SIZE (MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE)
+#else
+/* Just set an upper boundary but it should have no effect since the key size
+ * is limited in memory. */
 #define PSA_CRYPTO_MAX_STORAGE_SIZE (PSA_BITS_TO_BYTES(PSA_MAX_KEY_BITS))
+#endif
+
 /* Sanity check: a file size must fit in 32 bits. Allow a generous
  * 64kB of metadata. */
 #if PSA_CRYPTO_MAX_STORAGE_SIZE > 0xffff0000
diff --git a/tf-psa-crypto/doxygen/.gitignore b/tf-psa-crypto/doxygen/.gitignore
new file mode 100644
index 0000000..3d1b31d
--- /dev/null
+++ b/tf-psa-crypto/doxygen/.gitignore
@@ -0,0 +1 @@
+tfpsacrypto.doxyfile
diff --git a/tf-psa-crypto/doxygen/input/.gitignore b/tf-psa-crypto/doxygen/input/.gitignore
new file mode 100644
index 0000000..b806578
--- /dev/null
+++ b/tf-psa-crypto/doxygen/input/.gitignore
@@ -0,0 +1 @@
+doc_mainpage.h
diff --git a/tf-psa-crypto/doxygen/input/doc_mainpage.h.in b/tf-psa-crypto/doxygen/input/doc_mainpage.h.in
new file mode 100644
index 0000000..7c6ccb6
--- /dev/null
+++ b/tf-psa-crypto/doxygen/input/doc_mainpage.h.in
@@ -0,0 +1,19 @@
+/**
+ * \file doc_mainpage.h
+ *
+ * \brief Main page documentation file.
+ */
+/*
+ *
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+/**
+ * @mainpage TF-PSA-Crypto v@TF-PSA-Crypto_VERSION@ source code documentation
+ *
+ * This documentation describes the internal structure of the TF-PSA-Crypto
+ * library. It was automatically generated from specially formatted comment
+ * blocks in TF-PSA-Crypto source code using Doxygen (see
+ * http://www.stack.nl/~dimitri/doxygen/ for more information on Doxygen).
+ */
diff --git a/tf-psa-crypto/doxygen/tfpsacrypto.doxyfile.in b/tf-psa-crypto/doxygen/tfpsacrypto.doxyfile.in
new file mode 100644
index 0000000..56de487
--- /dev/null
+++ b/tf-psa-crypto/doxygen/tfpsacrypto.doxyfile.in
@@ -0,0 +1,54 @@
+PROJECT_NAME           = "TF-PSA-Crypto v@TF-PSA-Crypto_VERSION@"
+OUTPUT_DIRECTORY       = ../apidoc/
+FULL_PATH_NAMES        = NO
+OPTIMIZE_OUTPUT_FOR_C  = YES
+EXTRACT_ALL            = YES
+EXTRACT_PRIVATE        = YES
+EXTRACT_STATIC         = YES
+CASE_SENSE_NAMES       = NO
+INPUT                  = ../include input
+FILE_PATTERNS          = *.h
+EXCLUDE                = ../include/psa/crypto_se_driver.h
+RECURSIVE              = YES
+EXCLUDE_SYMLINKS       = YES
+SOURCE_BROWSER         = YES
+REFERENCED_BY_RELATION = YES
+REFERENCES_RELATION    = YES
+ALPHABETICAL_INDEX     = NO
+HTML_OUTPUT            = .
+HTML_TIMESTAMP         = YES
+SEARCHENGINE           = YES
+GENERATE_LATEX         = NO
+MACRO_EXPANSION        = YES
+EXPAND_ONLY_PREDEF     = YES
+INCLUDE_PATH           = ../include
+EXPAND_AS_DEFINED      = MBEDTLS_PRIVATE
+CLASS_DIAGRAMS         = NO
+HAVE_DOT               = YES
+DOT_GRAPH_MAX_NODES    = 200
+MAX_DOT_GRAPH_DEPTH    = 1000
+DOT_TRANSPARENT        = YES
+
+# We mostly use \retval declarations to document which error codes a function
+# can return. The reader can follow the hyperlink to the definition of the
+# constant to get the generic documentation of that error code. If we don't
+# have anything to say about the specific error code for the specific
+# function, we can leave the description part of the \retval command blank.
+# This is perfectly valid as far as Doxygen is concerned. However, with
+# Clang >=15, the -Wdocumentation option emits a warning for empty
+# descriptions.
+#   https://github.com/Mbed-TLS/mbedtls/issues/6960
+#   https://github.com/llvm/llvm-project/issues/60315
+# As a workaround, you can write something like
+#     \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+# This avoids writing redundant text and keeps Clang happy.
+ALIASES += emptydescription=""
+
+# Define away macros that make parsing definitions difficult.
+# MBEDTLS_DEPRECATED is not included in this list as it's important to
+# display deprecated status in the documentation.
+PREDEFINED             = "MBEDTLS_CHECK_RETURN_CRITICAL="   \
+                         "MBEDTLS_CHECK_RETURN_TYPICAL="    \
+                         "MBEDTLS_CHECK_RETURN_OPTIONAL="   \
+                         "MBEDTLS_PRINTF_ATTRIBUTE(a,b)="   \
+                         "__DOXYGEN__"                      \
diff --git a/tf-psa-crypto/drivers/builtin/src/pk.c b/tf-psa-crypto/drivers/builtin/src/pk.c
index 9632c76..81e2d94 100644
--- a/tf-psa-crypto/drivers/builtin/src/pk.c
+++ b/tf-psa-crypto/drivers/builtin/src/pk.c
@@ -35,10 +35,6 @@
 #include <limits.h>
 #include <stdint.h>
 
-#define PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE \
-    (PSA_EXPORT_KEY_PAIR_MAX_SIZE > PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) ? \
-    PSA_EXPORT_KEY_PAIR_MAX_SIZE : PSA_EXPORT_PUBLIC_KEY_MAX_SIZE
-
 /*
  * Initialise a mbedtls_pk_context
  */
diff --git a/tf-psa-crypto/drivers/p256-m/CMakeLists.txt b/tf-psa-crypto/drivers/p256-m/CMakeLists.txt
index bc53a5e..ede2831 100644
--- a/tf-psa-crypto/drivers/p256-m/CMakeLists.txt
+++ b/tf-psa-crypto/drivers/p256-m/CMakeLists.txt
@@ -29,7 +29,7 @@
 
 if(INSTALL_TF_PSA_CRYPTO_HEADERS)
 
-  install(DIRECTORY :${CMAKE_CURRENT_SOURCE_DIR}
+  install(DIRECTORY p256-m
     DESTINATION include
     FILE_PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ WORLD_READ
     DIRECTORY_PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_EXECUTE WORLD_READ WORLD_EXECUTE
@@ -38,6 +38,6 @@
 endif(INSTALL_TF_PSA_CRYPTO_HEADERS)
 
 install(TARGETS ${p256m_target}
-EXPORT MbedTLSTargets
-DESTINATION ${CMAKE_INSTALL_LIBDIR}
-PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ WORLD_READ)
+  EXPORT MbedTLSTargets
+  DESTINATION ${CMAKE_INSTALL_LIBDIR}
+  PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ WORLD_READ)
diff --git a/tf-psa-crypto/include/psa/crypto_extra.h b/tf-psa-crypto/include/psa/crypto_extra.h
index 0cf42c6..f48c087 100644
--- a/tf-psa-crypto/include/psa/crypto_extra.h
+++ b/tf-psa-crypto/include/psa/crypto_extra.h
@@ -32,6 +32,16 @@
 #define MBEDTLS_PSA_KEY_SLOT_COUNT 32
 #endif
 
+/* If the size of static key slots is not explicitly defined by the user, then
+ * set it to the maximum between PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE and
+ * PSA_CIPHER_MAX_KEY_LENGTH.
+ * See mbedtls_config.h for the definition. */
+#if !defined(MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE)
+#define MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE  \
+    ((PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE > PSA_CIPHER_MAX_KEY_LENGTH) ? \
+     PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE : PSA_CIPHER_MAX_KEY_LENGTH)
+#endif /* !MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE*/
+
 /** \addtogroup attributes
  * @{
  */
diff --git a/tf-psa-crypto/include/psa/crypto_sizes.h b/tf-psa-crypto/include/psa/crypto_sizes.h
index 635ee98..87b8c39 100644
--- a/tf-psa-crypto/include/psa/crypto_sizes.h
+++ b/tf-psa-crypto/include/psa/crypto_sizes.h
@@ -1038,6 +1038,10 @@
     PSA_KEY_EXPORT_FFDH_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS)
 #endif
 
+#define PSA_EXPORT_KEY_PAIR_OR_PUBLIC_MAX_SIZE \
+    ((PSA_EXPORT_KEY_PAIR_MAX_SIZE > PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) ? \
+     PSA_EXPORT_KEY_PAIR_MAX_SIZE : PSA_EXPORT_PUBLIC_KEY_MAX_SIZE)
+
 /** Sufficient output buffer size for psa_raw_key_agreement().
  *
  * This macro returns a compile-time constant if its arguments are
@@ -1085,6 +1089,27 @@
 #define PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE    PSA_BITS_TO_BYTES(PSA_VENDOR_FFDH_MAX_KEY_BITS)
 #endif
 
+/** Maximum key length for ciphers.
+ *
+ * Since there is no additional PSA_WANT_xxx symbol to specifiy the size of
+ * the key once a cipher is enabled (as it happens for asymmetric keys for
+ * example), the maximum key length is taken into account for each cipher.
+ * The resulting value will be the maximum cipher's key length given depending
+ * on which ciphers are enabled.
+ *
+ * Note: max value for AES used below would be doubled if XTS were enabled, but
+ *       this mode is currently not supported in Mbed TLS implementation of PSA
+ *       APIs.
+ */
+#if (defined(PSA_WANT_KEY_TYPE_AES) || defined(PSA_WANT_KEY_TYPE_ARIA) || \
+    defined(PSA_WANT_KEY_TYPE_CAMELLIA) || defined(PSA_WANT_KEY_TYPE_CHACHA20))
+#define PSA_CIPHER_MAX_KEY_LENGTH       32u
+#elif defined(PSA_WANT_KEY_TYPE_DES)
+#define PSA_CIPHER_MAX_KEY_LENGTH       24u
+#else
+#define PSA_CIPHER_MAX_KEY_LENGTH       0u
+#endif
+
 /** The default IV size for a cipher algorithm, in bytes.
  *
  * The IV that is generated as part of a call to #psa_cipher_encrypt() is always
diff --git a/tf-psa-crypto/pkgconfig/.gitignore b/tf-psa-crypto/pkgconfig/.gitignore
new file mode 100644
index 0000000..5460c20
--- /dev/null
+++ b/tf-psa-crypto/pkgconfig/.gitignore
@@ -0,0 +1,2 @@
+Makefile
+*.pc
diff --git a/tf-psa-crypto/pkgconfig/CMakeLists.txt b/tf-psa-crypto/pkgconfig/CMakeLists.txt
new file mode 100644
index 0000000..4b62a04
--- /dev/null
+++ b/tf-psa-crypto/pkgconfig/CMakeLists.txt
@@ -0,0 +1,15 @@
+if(NOT DISABLE_PACKAGE_CONFIG_AND_INSTALL)
+  include(JoinPaths.cmake)
+  join_paths(PKGCONFIG_INCLUDEDIR "\${prefix}" "${CMAKE_INSTALL_INCLUDEDIR}")
+  join_paths(PKGCONFIG_LIBDIR "\${prefix}" "${CMAKE_INSTALL_LIBDIR}")
+
+  #define these manually since minimum CMAKE version is not 3.9 for DESCRIPTION and 3.12 for HOMEPAGE_URL usage in project() below.
+  # Prefix with something that won't clash with newer versions of CMAKE.
+  set(PKGCONFIG_PROJECT_DESCRIPTION "TF-PSA-Crypto is a C library that implements cryptographic primitives. Its small code footprint makes it suitable for embedded systems.")
+  set(PKGCONFIG_PROJECT_HOMEPAGE_URL "https://www.trustedfirmware.org/projects/mbed-tls/")
+
+  configure_file(tfpsacrypto.pc.in tfpsacrypto.pc @ONLY)
+    install(FILES
+    ${CMAKE_CURRENT_BINARY_DIR}/tfpsacrypto.pc
+    DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig)
+endif()
diff --git a/tf-psa-crypto/pkgconfig/JoinPaths.cmake b/tf-psa-crypto/pkgconfig/JoinPaths.cmake
new file mode 100644
index 0000000..193caed
--- /dev/null
+++ b/tf-psa-crypto/pkgconfig/JoinPaths.cmake
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+# This module provides function for joining paths
+# known from most languages
+#
+# Copyright The Mbed TLS Contributors
+#
+# This script originates from:
+#   - https://github.com/jtojnar/cmake-snips
+# Jan has provided re-licensing under Apache 2.0 and GPL 2.0+ and
+# allowed for the change of Copyright.
+#
+# Modelled after Python’s os.path.join
+# https://docs.python.org/3.7/library/os.path.html#os.path.join
+# Windows not supported
+function(join_paths joined_path first_path_segment)
+    set(temp_path "${first_path_segment}")
+    foreach(current_segment IN LISTS ARGN)
+        if(NOT ("${current_segment}" STREQUAL ""))
+            if(IS_ABSOLUTE "${current_segment}")
+                set(temp_path "${current_segment}")
+            else()
+                set(temp_path "${temp_path}/${current_segment}")
+            endif()
+        endif()
+    endforeach()
+    set(${joined_path} "${temp_path}" PARENT_SCOPE)
+endfunction()
diff --git a/tf-psa-crypto/pkgconfig/tfpsacrypto.pc.in b/tf-psa-crypto/pkgconfig/tfpsacrypto.pc.in
new file mode 100644
index 0000000..2d130ea
--- /dev/null
+++ b/tf-psa-crypto/pkgconfig/tfpsacrypto.pc.in
@@ -0,0 +1,10 @@
+prefix=@CMAKE_INSTALL_PREFIX@
+includedir=@PKGCONFIG_INCLUDEDIR@
+libdir=@PKGCONFIG_LIBDIR@
+
+Name: @PROJECT_NAME@
+Description: @PKGCONFIG_PROJECT_DESCRIPTION@
+URL: @PKGCONFIG_PROJECT_HOMEPAGE_URL@
+Version: @PROJECT_VERSION@
+Cflags: -I"${includedir}"
+Libs: -L"${libdir}" -lmbedcrypto -lbuiltin -leverest -lp256m
diff --git a/tf-psa-crypto/programs/test/cmake_package/.gitignore b/tf-psa-crypto/programs/test/cmake_package/.gitignore
new file mode 100644
index 0000000..fd34d2b
--- /dev/null
+++ b/tf-psa-crypto/programs/test/cmake_package/.gitignore
@@ -0,0 +1,3 @@
+Makefile
+cmake_package
+tf-psa-crypto
diff --git a/tf-psa-crypto/programs/test/cmake_package/CMakeLists.txt b/tf-psa-crypto/programs/test/cmake_package/CMakeLists.txt
new file mode 100644
index 0000000..20b7322
--- /dev/null
+++ b/tf-psa-crypto/programs/test/cmake_package/CMakeLists.txt
@@ -0,0 +1,35 @@
+cmake_minimum_required(VERSION 2.8.12)
+
+#
+# Simulate configuring and building TF-PSA-Crypto as the user might do it.
+# We'll skip installing it, and use the build directory directly instead.
+#
+
+set(TF-PSA-Crypto_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/../../..")
+set(TF-PSA-Crypto_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}/tf-psa-crypto")
+
+execute_process(
+    COMMAND "${CMAKE_COMMAND}"
+        "-H${TF-PSA-Crypto_SOURCE_DIR}"
+        "-B${TF-PSA-Crypto_BINARY_DIR}"
+        "-DENABLE_PROGRAMS=NO"
+        "-DENABLE_TESTING=NO")
+
+execute_process(
+    COMMAND "${CMAKE_COMMAND}"
+        --build "${TF-PSA-Crypto_BINARY_DIR}")
+
+#
+# Locate the package.
+#
+
+set(TF-PSA-Crypto_DIR "${TF-PSA-Crypto_BINARY_DIR}/cmake")
+find_package(TF-PSA-Crypto REQUIRED)
+
+#
+# At this point, the TF-PSA-Crypto targets should have been imported, and we
+# can now link to them from our own program.
+#
+
+add_executable(cmake_package cmake_package.c)
+target_link_libraries(cmake_package TF-PSA-Crypto::mbedcrypto)
diff --git a/tf-psa-crypto/programs/test/cmake_package/cmake_package.c b/tf-psa-crypto/programs/test/cmake_package/cmake_package.c
new file mode 100644
index 0000000..c12ae7b
--- /dev/null
+++ b/tf-psa-crypto/programs/test/cmake_package/cmake_package.c
@@ -0,0 +1,19 @@
+/*
+ *  Simple program to test that TF-PSA-Crypto builds correctly as a CMake
+ *  package.
+ *
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+#include <psa/crypto.h>
+
+/* The main reason to build this is for testing the CMake build, so the program
+ * doesn't need to do very much. It calls a PSA cryptography API to ensure
+ * linkage works, but that is all. */
+int main()
+{
+    psa_crypto_init();
+
+    return 0;
+}
diff --git a/tf-psa-crypto/tests/CMakeLists.txt b/tf-psa-crypto/tests/CMakeLists.txt
index 862d862..0e84bab 100644
--- a/tf-psa-crypto/tests/CMakeLists.txt
+++ b/tf-psa-crypto/tests/CMakeLists.txt
@@ -3,13 +3,6 @@
     ${CMAKE_THREAD_LIBS_INIT}
 )
 
-# Set the project root directory if it's not already defined, as may happen if
-# the tests folder is included directly by a parent project, without including
-# the top level CMakeLists.txt.
-if(NOT DEFINED MBEDTLS_DIR)
-    set(MBEDTLS_DIR ${CMAKE_SOURCE_DIR})
-endif()
-
 if(NOT TF_PSA_CRYPTO_PYTHON_EXECUTABLE)
     message(FATAL_ERROR "Cannot build test suites without Python 3")
 endif()
@@ -357,5 +350,6 @@
     if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/seedfile")
         link_to_source(seedfile)
     endif()
+    link_to_source(Descriptions.txt)
     link_to_source(../../framework/data_files)
 endif()
diff --git a/tf-psa-crypto/tests/Descriptions.txt b/tf-psa-crypto/tests/Descriptions.txt
new file mode 100644
index 0000000..bc25056
--- /dev/null
+++ b/tf-psa-crypto/tests/Descriptions.txt
@@ -0,0 +1,5 @@
+test_suites
+    The various 'test_suite_XXX' programs from the 'tests' directory, executed
+    using 'make check' (Unix make) or 'make test' (Cmake), include test cases
+    (reference test vectors, sanity checks, malformed input for parsing
+    functions, etc.) for all modules except the SSL modules.
diff --git a/tf-psa-crypto/tests/suites/test_suite_pkparse.data b/tf-psa-crypto/tests/suites/test_suite_pkparse.data
index f896dd4..17a253d 100644
--- a/tf-psa-crypto/tests/suites/test_suite_pkparse.data
+++ b/tf-psa-crypto/tests/suites/test_suite_pkparse.data
@@ -51,23 +51,23 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs1_2048_aes256.pem":"testkey":0
 
 Parse RSA Key #14 (4096-bit, DES Encrypted)
-depends_on:PSA_WANT_ALG_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:PSA_WANT_ALG_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs1_4096_des.pem":"testkey":0
 
 Parse RSA Key #15 (4096-bit, 3DES Encrypted)
-depends_on:PSA_WANT_ALG_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:PSA_WANT_ALG_MD5:MBEDTLS_DES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs1_4096_3des.pem":"testkey":0
 
 Parse RSA Key #16 (4096-bit, AES-128 Encrypted)
-depends_on:PSA_WANT_ALG_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:PSA_WANT_ALG_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs1_4096_aes128.pem":"testkey":0
 
 Parse RSA Key #17 (4096-bit, AES-192 Encrypted)
-depends_on:PSA_WANT_ALG_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+depends_on:PSA_WANT_ALG_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs1_4096_aes192.pem":"testkey":0
 
 Parse RSA Key #18 (4096-bit, AES-256 Encrypted)
-depends_on:PSA_WANT_ALG_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+depends_on:PSA_WANT_ALG_MD5:MBEDTLS_AES_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_CIPHER_MODE_CBC:!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs1_4096_aes256.pem":"testkey":0
 
 Parse RSA Key #19 (PKCS#8 wrapped)
@@ -99,15 +99,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_2048_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #22 (PKCS#8 encrypted SHA1-3DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.pem":"PolarSSLTest":0
 
 Parse RSA Key #22.1 (PKCS#8 encrypted SHA1-3DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #22.2 (PKCS#8 encrypted SHA1-3DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #23 (PKCS#8 encrypted SHA1-3DES DER)
@@ -119,7 +119,7 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_2048_3des.der":"PolarSSLTest":0
 
 Parse RSA Key #25 (PKCS#8 encrypted SHA1-3DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_3des.der":"PolarSSLTest":0
 
 Parse RSA Key #26 (PKCS#8 encrypted SHA1-2DES)
@@ -147,15 +147,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_2048_2des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #28 (PKCS#8 encrypted SHA1-2DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.pem":"PolarSSLTest":0
 
 Parse RSA Key #28.1 (PKCS#8 encrypted SHA1-2DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.pem":"PolarSLTest":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #28.2 (PKCS#8 encrypted SHA1-2DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #29 (PKCS#8 encrypted SHA1-2DES DER)
@@ -167,7 +167,7 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_2048_2des.der":"PolarSSLTest":0
 
 Parse RSA Key #31 (PKCS#8 encrypted SHA1-2DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS12_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbe_sha1_4096_2des.der":"PolarSSLTest":0
 
 Parse RSA Key #38 (PKCS#8 encrypted v2 PBKDF2 3DES)
@@ -195,15 +195,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #40 (PKCS#8 encrypted v2 PBKDF2 3DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem":"PolarSSLTest":0
 
 Parse RSA Key #40.1 (PKCS#8 encrypted v2 PBKDF2 3DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #40.2 (PKCS#8 encrypted v2 PBKDF2 3DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #41 (PKCS#8 encrypted v2 PBKDF2 3DES DER)
@@ -231,15 +231,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #43 (PKCS#8 encrypted v2 PBKDF2 3DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.der":"PolarSSLTest":0
 
 Parse RSA Key #43.1 (PKCS#8 encrypted v2 PBKDF2 3DES DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #43.2 (PKCS#8 encrypted v2 PBKDF2 3DES DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #44 (PKCS#8 encrypted v2 PBKDF2 DES)
@@ -267,15 +267,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #46 (PKCS#8 encrypted v2 PBKDF2 DES, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.pem":"PolarSSLTest":0
 
 Parse RSA Key #46.1 (PKCS#8 encrypted v2 PBKDF2 DES, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #46.2 (PKCS#8 encrypted v2 PBKDF2 DES, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #47 (PKCS#8 encrypted v2 PBKDF2 DES DER)
@@ -303,15 +303,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #49 (PKCS#8 encrypted v2 PBKDF2 DES DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.der":"PolarSSLTest":0
 
 Parse RSA Key #49.1 (PKCS#8 encrypted v2 PBKDF2 DES DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #49.2 (PKCS#8 encrypted v2 PBKDF2 DES DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_1:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #50 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224)
@@ -339,15 +339,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #52 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem":"PolarSSLTest":0
 
 Parse RSA Key #52.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #52.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #53 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER)
@@ -375,15 +375,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #55 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der":"PolarSSLTest":0
 
 Parse RSA Key #55.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #55.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA224 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #56 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224)
@@ -411,15 +411,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #58 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem":"PolarSSLTest":0
 
 Parse RSA Key #58.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #58.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #59 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER)
@@ -447,15 +447,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #61 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der":"PolarSSLTest":0
 
 Parse RSA Key #61.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #61.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA224 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_224:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #62 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256)
@@ -483,15 +483,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #64 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem":"PolarSSLTest":0
 
 Parse RSA Key #64.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #64.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #65 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER)
@@ -519,15 +519,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #67 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der":"PolarSSLTest":0
 
 Parse RSA Key #68.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #68.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA256 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #69 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256)
@@ -555,15 +555,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #71 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem":"PolarSSLTest":0
 
 Parse RSA Key #71.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #71.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #72 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER)
@@ -591,15 +591,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #74 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der":"PolarSSLTest":0
 
 Parse RSA Key #74.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #74.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA256 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_256:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #75 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384)
@@ -627,15 +627,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #77 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem":"PolarSSLTest":0
 
 Parse RSA Key #77.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #77.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #78 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER)
@@ -663,15 +663,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #80 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der":"PolarSSLTest":0
 
 Parse RSA Key #80.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #80.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA384 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #81 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384)
@@ -699,15 +699,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #83 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem":"PolarSSLTest":0
 
 Parse RSA Key #83.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #83.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #84 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER)
@@ -735,15 +735,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #87 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der":"PolarSSLTest":0
 
 Parse RSA Key #87.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #87.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA384 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_384:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #88 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512)
@@ -771,15 +771,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #90 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem":"PolarSSLTest":0
 
 Parse RSA Key #90.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #90.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #91 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER)
@@ -807,15 +807,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #93 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der":"PolarSSLTest":0
 
 Parse RSA Key #93.1 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #93.2 (PKCS#8 encrypted v2 PBKDF2 3DES hmacWithSHA512 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #94 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512)
@@ -843,15 +843,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #96 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem":"PolarSSLTest":0
 
 Parse RSA Key #96.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #96.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PEM_PARSE_C:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem":"":MBEDTLS_ERR_PK_PASSWORD_REQUIRED
 
 Parse RSA Key #97 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER)
@@ -879,15 +879,15 @@
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #99 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER, 4096-bit)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der":"PolarSSLTest":0
 
 Parse RSA Key #99.1 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER, 4096-bit, wrong PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_CIPHER_MODE_CBC:MBEDTLS_CIPHER_PADDING_PKCS7:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der":"PolarSSLTes":MBEDTLS_ERR_PK_PASSWORD_MISMATCH
 
 Parse RSA Key #99.2 (PKCS#8 encrypted v2 PBKDF2 DES hmacWithSHA512 DER, 4096-bit, no PW)
-depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C
+depends_on:MBEDTLS_DES_C:PSA_WANT_ALG_SHA_512:MBEDTLS_PKCS5_C:MBEDTLS_CIPHER_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_parse_keyfile_rsa:"../../framework/data_files/rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der":"":MBEDTLS_ERR_PK_KEY_INVALID_FORMAT
 
 Parse RSA Key #99.3 (PKCS#8 encrypted v2 PBKDF2 AES-128-CBC hmacWithSHA384, 2048-bit)
diff --git a/tf-psa-crypto/tests/suites/test_suite_pkwrite.data b/tf-psa-crypto/tests/suites/test_suite_pkwrite.data
index d895d39..ff9d4ec 100644
--- a/tf-psa-crypto/tests/suites/test_suite_pkwrite.data
+++ b/tf-psa-crypto/tests/suites/test_suite_pkwrite.data
@@ -7,11 +7,11 @@
 pk_write_pubkey_check:"../../framework/data_files/server1.pubkey.der":TEST_DER
 
 Public key write check RSA 4096
-depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_pubkey_check:"../../framework/data_files/rsa4096_pub.pem":TEST_PEM
 
 Public key write check RSA 4096 (DER)
-depends_on:MBEDTLS_RSA_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_pubkey_check:"../../framework/data_files/rsa4096_pub.der":TEST_DER
 
 Public key write check EC 192 bits
@@ -30,16 +30,13 @@
 depends_on:PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY:PSA_WANT_ECC_SECP_R1_521
 pk_write_pubkey_check:"../../framework/data_files/ec_521_pub.der":TEST_DER
 
-## The pk_write_pubkey_check sometimes take ~3 hours to run with
-## GCC+Asan on the CI in the full config. Comment out the slowest
-## ones while we investigate and release 3.6.2.
-# Public key write check EC Brainpool 512 bits
-# depends_on:PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C:PSA_WANT_ECC_BRAINPOOL_P_R1_512
-# pk_write_pubkey_check:"../../framework/data_files/ec_bp512_pub.pem":TEST_PEM
+Public key write check EC Brainpool 512 bits
+depends_on:PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C:PSA_WANT_ECC_BRAINPOOL_P_R1_512
+pk_write_pubkey_check:"../../framework/data_files/ec_bp512_pub.pem":TEST_PEM
 
-# Public key write check EC Brainpool 512 bits (DER)
-# depends_on:PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY:PSA_WANT_ECC_BRAINPOOL_P_R1_512
-# pk_write_pubkey_check:"../../framework/data_files/ec_bp512_pub.der":TEST_DER
+Public key write check EC Brainpool 512 bits (DER)
+depends_on:PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY:PSA_WANT_ECC_BRAINPOOL_P_R1_512
+pk_write_pubkey_check:"../../framework/data_files/ec_bp512_pub.der":TEST_DER
 
 Public key write check EC X25519
 depends_on:PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C:PSA_WANT_ECC_MONTGOMERY_255
@@ -66,11 +63,11 @@
 pk_write_key_check:"../../framework/data_files/server1.key.der":TEST_DER
 
 Private key write check RSA 4096
-depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_PEM_PARSE_C:MBEDTLS_PEM_WRITE_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_key_check:"../../framework/data_files/rsa4096_prv.pem":TEST_PEM
 
 Private key write check RSA 4096 (DER)
-depends_on:MBEDTLS_RSA_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_key_check:"../../framework/data_files/rsa4096_prv.der":TEST_DER
 
 Private key write check EC 192 bits
@@ -134,7 +131,7 @@
 pk_write_public_from_private:"../../framework/data_files/server1.key.der":"../../framework/data_files/server1.pubkey.der"
 
 Derive public key RSA 4096
-depends_on:MBEDTLS_RSA_C
+depends_on:MBEDTLS_RSA_C:MBEDTLS_TEST_PK_ALLOW_RSA_KEY_PAIR_4096
 pk_write_public_from_private:"../../framework/data_files/rsa4096_prv.der":"../../framework/data_files/rsa4096_pub.der"
 
 Derive public key EC 192 bits
diff --git a/tf-psa-crypto/tests/suites/test_suite_psa_crypto.data b/tf-psa-crypto/tests/suites/test_suite_psa_crypto.data
index c2deaa5..87fec19 100644
--- a/tf-psa-crypto/tests/suites/test_suite_psa_crypto.data
+++ b/tf-psa-crypto/tests/suites/test_suite_psa_crypto.data
@@ -7158,7 +7158,7 @@
 # and not expected to be raised any time soon) is less than the maximum
 # output from HKDF-SHA512 (255*64 = 16320 bytes).
 PSA key derivation: largest possible key
-depends_on:PSA_WANT_ALG_HKDF:PSA_WANT_ALG_SHA_512
+depends_on:PSA_WANT_ALG_HKDF:PSA_WANT_ALG_SHA_512:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= PSA_BITS_TO_BYTES(PSA_MAX_KEY_BITS)
 derive_key:PSA_ALG_HKDF(PSA_ALG_SHA_512):"0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b":"000102030405060708090a0b0c":"f0f1f2f3f4f5f6f7f8f9":PSA_KEY_TYPE_RAW_DATA:PSA_MAX_KEY_BITS:PSA_SUCCESS:1
 
 PSA key derivation: key too large
@@ -7402,12 +7402,15 @@
 generate_key:PSA_KEY_TYPE_RAW_DATA:9:PSA_KEY_USAGE_EXPORT:0:PSA_ERROR_INVALID_ARGUMENT:0
 
 PSA generate key: raw data, (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
+depends_on:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 generate_key:PSA_KEY_TYPE_RAW_DATA:(MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0
 
 PSA generate key: raw data, (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
+depends_on:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 generate_key:PSA_KEY_TYPE_RAW_DATA:(2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0
 
 PSA generate key: raw data, 65528 bits (large key, ok if it fits)
+depends_on:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= PSA_BITS_TO_BYTES(65528)
 generate_key:PSA_KEY_TYPE_RAW_DATA:65528:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:1
 
 PSA generate key: raw data, 65536 bits (not supported)
@@ -7478,6 +7481,17 @@
 depends_on:PSA_WANT_ALG_RSA_PKCS1V15_CRYPT:PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE
 generate_key:PSA_KEY_TYPE_RSA_KEY_PAIR:PSA_VENDOR_RSA_MAX_KEY_BITS+8:PSA_KEY_USAGE_EXPORT | PSA_KEY_USAGE_ENCRYPT | PSA_KEY_USAGE_DECRYPT:PSA_ALG_RSA_PKCS1V15_CRYPT:PSA_ERROR_NOT_SUPPORTED:0
 
+# Following 2 tests are meant to be tested from the component_test_crypto_with_static_key_slots()
+# test component. There MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE is intentionally set to a value
+# that is OK for all public RSA key bit sizes, but only valid up to 2048 bits for key pairs.
+PSA generate key: RSA, key pair size does not fit in static key buffer
+depends_on:PSA_WANT_ALG_RSA_PKCS1V15_CRYPT:PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE:MBEDTLS_PSA_STATIC_KEY_SLOTS:!MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_4096:PSA_VENDOR_RSA_MAX_KEY_BITS>=4096
+generate_key:PSA_KEY_TYPE_RSA_KEY_PAIR:4096:PSA_KEY_USAGE_EXPORT:PSA_ALG_RSA_PKCS1V15_CRYPT:PSA_ERROR_NOT_SUPPORTED:0
+
+PSA generate key: RSA, key pair size fits in static key buffer
+depends_on:PSA_WANT_ALG_RSA_PKCS1V15_CRYPT:PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE:MBEDTLS_PSA_STATIC_KEY_SLOTS:MBEDTLS_TEST_STATIC_KEY_SLOTS_SUPPORT_RSA_2048:PSA_VENDOR_RSA_MAX_KEY_BITS>=2048
+generate_key:PSA_KEY_TYPE_RSA_KEY_PAIR:2048:PSA_KEY_USAGE_EXPORT:PSA_ALG_RSA_PKCS1V15_CRYPT:PSA_SUCCESS:0
+
 PSA generate key: ECC, SECP256R1, good
 depends_on:PSA_WANT_ALG_ECDSA:PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE:PSA_WANT_ECC_SECP_R1_256
 generate_key:PSA_KEY_TYPE_ECC_KEY_PAIR(PSA_ECC_FAMILY_SECP_R1):256:PSA_KEY_USAGE_EXPORT | PSA_KEY_USAGE_SIGN_HASH | PSA_KEY_USAGE_VERIFY_HASH:PSA_ALG_ECDSA_ANY:PSA_SUCCESS:0
@@ -7619,15 +7633,15 @@
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:9:PSA_KEY_USAGE_EXPORT:0:PSA_ERROR_INVALID_ARGUMENT:0:8:5
 
 PSA concurrent key generation: raw data, (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
-depends_on:MBEDTLS_THREADING_PTHREAD
+depends_on:MBEDTLS_THREADING_PTHREAD:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:(MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0:8:5
 
 PSA concurrent key generation: raw data, (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8 bits
-depends_on:MBEDTLS_THREADING_PTHREAD
+depends_on:MBEDTLS_THREADING_PTHREAD:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE >= (2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1)
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:(2 * MBEDTLS_CTR_DRBG_MAX_REQUEST + 1) * 8:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:0:8:5
 
 PSA concurrent key generation: raw data, 65528 bits (large key, ok if it fits)
-depends_on:MBEDTLS_THREADING_PTHREAD
+depends_on:MBEDTLS_THREADING_PTHREAD:MBEDTLS_PSA_KEY_BUFFER_MAX_SIZE > PSA_BITS_TO_BYTES(65528)
 concurrently_generate_keys:PSA_KEY_TYPE_RAW_DATA:65528:PSA_KEY_USAGE_EXPORT:0:PSA_SUCCESS:1:8:5
 
 PSA concurrent key generation: raw data, 65536 bits (not supported)
@@ -7820,9 +7834,7 @@
 depends_on:PSA_WANT_ECC_SECP_K1_192
 ecc_conversion_functions:MBEDTLS_ECP_DP_SECP192K1:PSA_ECC_FAMILY_SECP_K1:192
 
-ECP group ID <-> PSA family - SECP224K1
-depends_on:PSA_WANT_ECC_SECP_K1_224
-ecc_conversion_functions:MBEDTLS_ECP_DP_SECP224K1:PSA_ECC_FAMILY_SECP_K1:224
+# No test case for SECP224K1, which is not implemented in the PSA API.
 
 ECP group ID <-> PSA family - SECP256K1
 depends_on:PSA_WANT_ECC_SECP_K1_256
@@ -7837,4 +7849,3 @@
 
 ECP group ID <-> PSA family - Wrong values
 ecc_conversion_functions_fail
-
diff --git a/tf-psa-crypto/tests/suites/test_suite_psa_crypto.function b/tf-psa-crypto/tests/suites/test_suite_psa_crypto.function
index cee73b0..b1c662f 100644
--- a/tf-psa-crypto/tests/suites/test_suite_psa_crypto.function
+++ b/tf-psa-crypto/tests/suites/test_suite_psa_crypto.function
@@ -1236,7 +1236,7 @@
 }
 #endif /* MBEDTLS_ECP_RESTARTABLE */
 
-#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE)
+#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE) && defined(MBEDTLS_ASN1_PARSE_C)
 static int rsa_test_e(mbedtls_svc_key_id_t key,
                       size_t bits,
                       const data_t *e_arg)
@@ -1615,7 +1615,7 @@
 }
 /* END_CASE */
 
-/* BEGIN_CASE */
+/* BEGIN_CASE depends_on: !MBEDTLS_PSA_STATIC_KEY_SLOTS*/
 /* Construct and attempt to import a large unstructured key. */
 void import_large_key(int type_arg, int byte_size_arg,
                       int expected_status_arg)
@@ -10180,7 +10180,7 @@
     TEST_EQUAL(psa_get_key_type(&got_attributes), type);
     TEST_EQUAL(psa_get_key_bits(&got_attributes), bits);
 
-#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE)
+#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE) && defined(MBEDTLS_ASN1_PARSE_C)
     if (type == PSA_KEY_TYPE_RSA_KEY_PAIR) {
         TEST_ASSERT(rsa_test_e(key, bits, custom_data));
     }
diff --git a/tf-psa-crypto/tests/suites/test_suite_psa_crypto_driver_wrappers.function b/tf-psa-crypto/tests/suites/test_suite_psa_crypto_driver_wrappers.function
index 84611fa..49b1c15 100644
--- a/tf-psa-crypto/tests/suites/test_suite_psa_crypto_driver_wrappers.function
+++ b/tf-psa-crypto/tests/suites/test_suite_psa_crypto_driver_wrappers.function
@@ -6,13 +6,14 @@
 size_t pake_expected_hit_count = 0;
 int pake_in_driver = 0;
 
+#if defined(PSA_WANT_ALG_JPAKE) && \
+    defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC) && \
+    defined(PSA_WANT_ECC_SECP_R1_256) && defined(PSA_WANT_ALG_SHA_256)
+
 /* The only two JPAKE user/peer identifiers supported for the time being. */
 static const uint8_t jpake_server_id[] = { 's', 'e', 'r', 'v', 'e', 'r' };
 static const uint8_t jpake_client_id[] = { 'c', 'l', 'i', 'e', 'n', 't' };
 
-#if defined(PSA_WANT_ALG_JPAKE) && \
-    defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC) && \
-    defined(PSA_WANT_ECC_SECP_R1_256) && defined(PSA_WANT_ALG_SHA_256)
 static void ecjpake_do_round(psa_algorithm_t alg, unsigned int primitive,
                              psa_pake_operation_t *server,
                              psa_pake_operation_t *client,
@@ -437,6 +438,11 @@
     mbedtls_mpi_init(&D);
     mbedtls_mpi_init(&C);
     mbedtls_mpi_init(&X);
+#else /* MBEDTLS_BIGNUM_C */
+    (void) alg;
+    (void) private_exponent;
+    (void) input_data;
+    (void) buf;
 #endif /* MBEDTLS_BIGNUM_C */
 
     int ok = 0;
@@ -843,7 +849,7 @@
 {
     psa_key_lifetime_t lifetime =
         PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION( \
-            PSA_KEY_PERSISTENCE_DEFAULT, location);
+            PSA_KEY_PERSISTENCE_VOLATILE, location);
     mbedtls_svc_key_id_t id = mbedtls_svc_key_id_make(owner_id_arg, id_arg);
     psa_status_t force_status = force_status_arg;
     psa_status_t expected_status = expected_status_arg;
diff --git a/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.function b/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.function
index efaaba5..5788742 100644
--- a/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.function
+++ b/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.function
@@ -1,14 +1,16 @@
 /* BEGIN_HEADER */
 
 #include <psa/crypto.h>
+#include <psa_crypto_storage.h>
 
 #include <test/psa_crypto_helpers.h>
 #include <test/psa_exercise_key.h>
 
 #include <psa_crypto_its.h>
 
-#define TEST_FLAG_EXERCISE      0x00000001
-#define TEST_FLAG_READ_ONLY     0x00000002
+#define TEST_FLAG_EXERCISE              0x00000001
+#define TEST_FLAG_READ_ONLY             0x00000002
+#define TEST_FLAG_OVERSIZED_KEY         0x00000004
 
 /** Write a key with the given attributes and key material to storage.
  * Test that it has the expected representation.
@@ -158,6 +160,12 @@
     /* Prime the storage with a key file. */
     PSA_ASSERT(psa_its_set(uid, representation->len, representation->x, 0));
 
+    if (flags & TEST_FLAG_OVERSIZED_KEY) {
+        TEST_EQUAL(psa_get_key_attributes(key_id, &actual_attributes), PSA_ERROR_DATA_INVALID);
+        ok = 1;
+        goto exit;
+    }
+
     /* Check that the injected key exists and looks as expected. */
     PSA_ASSERT(psa_get_key_attributes(key_id, &actual_attributes));
     TEST_ASSERT(mbedtls_svc_key_id_equal(key_id,
@@ -281,6 +289,7 @@
     mbedtls_svc_key_id_t key_id = mbedtls_svc_key_id_make(0, 1);
     psa_storage_uid_t uid = 1;
     psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
+    uint8_t *custom_key_data = NULL, *custom_storage_data = NULL;
 
     PSA_INIT();
     TEST_USES_KEY_ID(key_id);
@@ -293,6 +302,23 @@
     psa_set_key_algorithm(&attributes, alg);
     psa_set_key_enrollment_algorithm(&attributes, alg2);
 
+    /* Create a persistent key which is intentionally larger than the specified
+     * bit size. */
+    if (flags & TEST_FLAG_OVERSIZED_KEY) {
+        TEST_CALLOC(custom_key_data, PSA_BITS_TO_BYTES(bits));
+        memset(custom_key_data, 0xAA, PSA_BITS_TO_BYTES(bits));
+        material->len = PSA_BITS_TO_BYTES(bits);
+        material->x = custom_key_data;
+
+        /* 36 bytes are the overhead of psa_persistent_key_storage_format */
+        TEST_CALLOC(custom_storage_data, PSA_BITS_TO_BYTES(bits) + 36);
+        representation->len = PSA_BITS_TO_BYTES(bits) + 36;
+        representation->x = custom_storage_data;
+
+        psa_format_key_data_for_storage(custom_key_data, PSA_BITS_TO_BYTES(bits),
+                                        &attributes, custom_storage_data);
+    }
+
     /* Test that we can use a key with the given representation. This
      * guarantees backward compatibility with keys that were stored by
      * past versions of Mbed TLS. */
@@ -300,6 +326,8 @@
                               uid, representation, flags));
 
 exit:
+    mbedtls_free(custom_key_data);
+    mbedtls_free(custom_storage_data);
     psa_reset_key_attributes(&attributes);
     PSA_DONE();
 }
diff --git a/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.misc.data b/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.misc.data
index 48e3804..359053e 100644
--- a/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.misc.data
+++ b/tf-psa-crypto/tests/suites/test_suite_psa_crypto_storage_format.misc.data
@@ -9,3 +9,9 @@
 PSA storage save: AES-GCM+CTR
 depends_on:PSA_WANT_KEY_TYPE_AES
 key_storage_save:PSA_KEY_LIFETIME_PERSISTENT:PSA_KEY_TYPE_AES:128:PSA_KEY_USAGE_EXPORT | PSA_KEY_USAGE_ENCRYPT:PSA_ALG_GCM:PSA_ALG_CTR:"404142434445464748494a4b4c4d4e4f":"505341004b45590000000000010000000024800001010000000250050010c00410000000404142434445464748494a4b4c4d4e4f"
+
+# Create a persistent key which is larger than MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+# so that when psa_get_key_attributes() tries to load it from the storage it will fail.
+PSA storage read: key larger than MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE
+depends_on:PSA_WANT_KEY_TYPE_RAW_DATA:MBEDTLS_PSA_STATIC_KEY_SLOTS
+key_storage_read:PSA_KEY_LIFETIME_PERSISTENT:PSA_KEY_TYPE_RAW_DATA:PSA_BYTES_TO_BITS(MBEDTLS_PSA_STATIC_KEY_SLOT_BUFFER_SIZE + 1):PSA_KEY_USAGE_EXPORT:PSA_ALG_NONE:PSA_ALG_NONE:"":"":TEST_FLAG_OVERSIZED_KEY