Extract configuration-platform components into a separate file.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
diff --git a/tests/scripts/components-configuration-tls.sh b/tests/scripts/components-configuration-tls.sh
index 0775ac1..33f627e 100644
--- a/tests/scripts/components-configuration-tls.sh
+++ b/tests/scripts/components-configuration-tls.sh
@@ -8,3 +8,534 @@
################################################################
#### Configuration Testing - TLS
################################################################
+
+component_test_no_renegotiation () {
+ msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min
+ scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s
+ make test
+
+ msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min
+ tests/ssl-opt.sh
+}
+
+component_test_tls1_2_default_stream_cipher_only () {
+ msg "build: default with only stream cipher"
+
+ # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C
+ scripts/config.py unset MBEDTLS_GCM_C
+ scripts/config.py unset MBEDTLS_CCM_C
+ scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+ #Disable TLS 1.3 (as no AEAD)
+ scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+ # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+ scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+ # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+ scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+ # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+ scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
+ # Modules that depend on AEAD
+ scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+ scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+ make
+
+ msg "test: default with only stream cipher"
+ make test
+
+ # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
+}
+
+component_test_tls1_2_default_cbc_legacy_cipher_only () {
+ msg "build: default with only CBC-legacy cipher"
+
+ # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+ scripts/config.py unset MBEDTLS_GCM_C
+ scripts/config.py unset MBEDTLS_CCM_C
+ scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+ #Disable TLS 1.3 (as no AEAD)
+ scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+ # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+ scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+ # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+ scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+ # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+ scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+ # Modules that depend on AEAD
+ scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+ scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+ make
+
+ msg "test: default with only CBC-legacy cipher"
+ make test
+
+ msg "test: default with only CBC-legacy cipher - ssl-opt.sh (subset)"
+ tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () {
+ msg "build: default with only CBC-legacy and CBC-EtM ciphers"
+
+ # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+ scripts/config.py unset MBEDTLS_GCM_C
+ scripts/config.py unset MBEDTLS_CCM_C
+ scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+ #Disable TLS 1.3 (as no AEAD)
+ scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+ # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+ scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+ # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+ scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
+ # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+ scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+ # Modules that depend on AEAD
+ scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+ scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+ make
+
+ msg "test: default with only CBC-legacy and CBC-EtM ciphers"
+ make test
+
+ msg "test: default with only CBC-legacy and CBC-EtM ciphers - ssl-opt.sh (subset)"
+ tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
+# that we could use for interop testing. However, we now have sort of two
+# implementations ourselves: one using PSA, the other not. At least test that
+# these two interoperate with each other.
+component_test_tls1_2_ecjpake_compatibility () {
+ msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
+ scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+ # Explicitly make lib first to avoid a race condition:
+ # https://github.com/Mbed-TLS/mbedtls/issues/8229
+ make lib
+ make -C programs ssl/ssl_server2 ssl/ssl_client2
+ cp programs/ssl/ssl_server2 s2_no_use_psa
+ cp programs/ssl/ssl_client2 c2_no_use_psa
+
+ msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
+ scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+ make clean
+ make lib
+ make -C programs ssl/ssl_server2 ssl/ssl_client2
+ make -C programs test/udp_proxy test/query_compile_time_config
+
+ msg "test: server w/o USE_PSA - client w/ USE_PSA, text password"
+ P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
+ msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password"
+ P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS"
+ msg "test: client w/o USE_PSA - server w/ USE_PSA, text password"
+ P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
+ msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password"
+ P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS"
+
+ rm s2_no_use_psa c2_no_use_psa
+}
+
+component_test_small_ssl_out_content_len () {
+ msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
+ scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
+ scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests"
+ tests/ssl-opt.sh -f "Max fragment\|Large packet"
+}
+
+component_test_small_ssl_in_content_len () {
+ msg "build: small SSL_IN_CONTENT_LEN (ASan build)"
+ scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096
+ scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests"
+ tests/ssl-opt.sh -f "Max fragment"
+}
+
+component_test_small_ssl_dtls_max_buffering () {
+ msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0"
+ scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test"
+ tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg"
+}
+
+component_test_small_mbedtls_ssl_dtls_max_buffering () {
+ msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1"
+ scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test"
+ tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket"
+}
+
+component_test_depends_py_kex () {
+ msg "test/build: depends.py kex (gcc)"
+ tests/scripts/depends.py kex --unset-use-psa
+}
+
+component_test_depends_py_kex_psa () {
+ msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+ tests/scripts/depends.py kex
+}
+
+# Common helper for component_full_without_ecdhe_ecdsa() and
+# component_full_without_ecdhe_ecdsa_and_tls13() which:
+# - starts from the "full" configuration minus the list of symbols passed in
+# as 1st parameter
+# - build
+# - test only TLS (i.e. test_suite_tls and ssl-opt)
+build_full_minus_something_and_test_tls () {
+ symbols_to_disable="$1"
+
+ msg "build: full minus something, test TLS"
+
+ scripts/config.py full
+ for sym in $symbols_to_disable; do
+ echo "Disabling $sym"
+ scripts/config.py unset $sym
+ done
+
+ make
+
+ msg "test: full minus something, test TLS"
+ ( cd tests; ./test_suite_ssl )
+
+ msg "ssl-opt: full minus something, test TLS"
+ tests/ssl-opt.sh
+}
+
+component_full_without_ecdhe_ecdsa () {
+ build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED"
+}
+
+component_full_without_ecdhe_ecdsa_and_tls13 () {
+ build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+ MBEDTLS_SSL_PROTO_TLS1_3"
+}
+
+component_build_no_ssl_srv () {
+ msg "build: full config except SSL server, make, gcc" # ~ 30s
+ scripts/config.py full
+ scripts/config.py unset MBEDTLS_SSL_SRV_C
+ make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
+}
+
+component_build_no_ssl_cli () {
+ msg "build: full config except SSL client, make, gcc" # ~ 30s
+ scripts/config.py full
+ scripts/config.py unset MBEDTLS_SSL_CLI_C
+ make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
+}
+
+component_test_no_max_fragment_length () {
+ # Run max fragment length tests with MFL disabled
+ msg "build: default config except MFL extension (ASan build)" # ~ 30s
+ scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: ssl-opt.sh, MFL-related tests"
+ tests/ssl-opt.sh -f "Max fragment length"
+}
+
+component_test_asan_remove_peer_certificate () {
+ msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)"
+ scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+ scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+ make test
+
+ msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+ tests/ssl-opt.sh
+
+ msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+ tests/compat.sh
+
+ msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+ tests/context-info.sh
+}
+
+component_test_no_max_fragment_length_small_ssl_out_content_len () {
+ msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)"
+ scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
+ scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: MFL tests (disabled MFL extension case) & large packet tests"
+ tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
+
+ msg "test: context-info.sh (disabled MFL extension case)"
+ tests/context-info.sh
+}
+
+component_test_variable_ssl_in_out_buffer_len () {
+ msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)"
+ scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+ make test
+
+ msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+ tests/ssl-opt.sh
+
+ msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+ tests/compat.sh
+}
+
+component_test_dtls_cid_legacy () {
+ msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)"
+ scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1
+
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)"
+ make test
+
+ msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
+ tests/ssl-opt.sh
+
+ msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
+ tests/compat.sh
+}
+
+component_test_ssl_alloc_buffer_and_mfl () {
+ msg "build: default config with memory buffer allocator and MFL extension"
+ scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+ scripts/config.py set MBEDTLS_MEMORY_DEBUG
+ scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+ cmake -DCMAKE_BUILD_TYPE:String=Release .
+ make
+
+ msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+ make test
+
+ msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+ tests/ssl-opt.sh -f "Handshake memory usage"
+}
+
+component_test_when_no_ciphersuites_have_mac () {
+ msg "build: when no ciphersuites have MAC"
+ scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+ scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+ scripts/config.py unset MBEDTLS_CMAC_C
+ make
+
+ msg "test: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
+ make test
+
+ msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
+ tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM'
+}
+
+component_test_tls12_only () {
+ msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_3, cmake, gcc, ASan"
+ scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+ CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+
+ msg "test: main suites (inc. selftests) (ASan build)"
+ make test
+
+ msg "test: ssl-opt.sh (ASan build)"
+ tests/ssl-opt.sh
+
+ msg "test: compat.sh (ASan build)"
+ tests/compat.sh
+}
+
+component_test_tls13_only () {
+ msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_2"
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test: TLS 1.3 only, all key exchange modes enabled"
+ make test
+
+ msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk () {
+ msg "build: TLS 1.3 only from default, only PSK key exchange mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+ scripts/config.py unset MBEDTLS_ECDH_C
+ scripts/config.py unset MBEDTLS_DHM_C
+ scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+ scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+ scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+ scripts/config.py unset MBEDTLS_ECDSA_C
+ scripts/config.py unset MBEDTLS_PKCS1_V21
+ scripts/config.py unset MBEDTLS_PKCS7_C
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled"
+ cd tests; ./test_suite_ssl; cd ..
+
+ msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral () {
+ msg "build: TLS 1.3 only from default, only ephemeral key exchange mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+ scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode"
+ cd tests; ./test_suite_ssl; cd ..
+
+ msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral_ffdh () {
+ msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+ scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+ scripts/config.py unset MBEDTLS_ECDH_C
+
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode"
+ cd tests; ./test_suite_ssl; cd ..
+
+ msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_ephemeral () {
+ msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+ scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+ scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+ scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+ scripts/config.py unset MBEDTLS_ECDSA_C
+ scripts/config.py unset MBEDTLS_PKCS1_V21
+ scripts/config.py unset MBEDTLS_PKCS7_C
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode"
+ cd tests; ./test_suite_ssl; cd ..
+
+ msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_ephemeral_ffdh () {
+ msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+ scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+ scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+ scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+ scripts/config.py unset MBEDTLS_ECDSA_C
+ scripts/config.py unset MBEDTLS_PKCS1_V21
+ scripts/config.py unset MBEDTLS_PKCS7_C
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ scripts/config.py unset MBEDTLS_ECDH_C
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
+ cd tests; ./test_suite_ssl; cd ..
+
+ msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_all () {
+ msg "build: TLS 1.3 only from default, without ephemeral key exchange mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+ scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+ scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+ scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+ scripts/config.py unset MBEDTLS_ECDSA_C
+ scripts/config.py unset MBEDTLS_PKCS1_V21
+ scripts/config.py unset MBEDTLS_PKCS7_C
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
+ cd tests; ./test_suite_ssl; cd ..
+
+ msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral_all () {
+ msg "build: TLS 1.3 only from default, without PSK key exchange mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+ msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
+ cd tests; ./test_suite_ssl; cd ..
+
+ msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_no_padding () {
+ msg "build: default config plus early data minus padding"
+ scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+ msg "test: default config plus early data minus padding"
+ make test
+ msg "ssl-opt.sh (TLS 1.3 no padding)"
+ tests/ssl-opt.sh
+}
+
+component_test_tls13_no_compatibility_mode () {
+ msg "build: default config plus early data minus middlebox compatibility mode"
+ scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
+ scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+ CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+ msg "test: default config plus early data minus middlebox compatibility mode"
+ make test
+ msg "ssl-opt.sh (TLS 1.3 no compatibility mode)"
+ tests/ssl-opt.sh
+}
+
+component_test_full_minus_session_tickets () {
+ msg "build: full config without session tickets"
+ scripts/config.py full
+ scripts/config.py unset MBEDTLS_SSL_SESSION_TICKETS
+ scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+ CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+ make
+ msg "test: full config without session tickets"
+ make test
+ msg "ssl-opt.sh (full config without session tickets)"
+ tests/ssl-opt.sh
+}