TrustedFirmware Git Browser
Code Review Sign In
review.trustedfirmware.org / mirror / mbed-tls / 3ece57e173d556703428160e098988fd792b43b9 / . / tests / scripts / components.sh
blob: 30f95f1b0bcb48cca6521d153f664fed09607ce1 [file] [log] [blame]
# components.sh
#
# Copyright The Mbed TLS Contributors
# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
# This file contains the test components that are executed by all.sh
# The functions below are named as follows:
# * component_XXX: independent components. They can be run in any order.
# * component_check_XXX: quick tests that aren't worth parallelizing.
# * component_build_XXX: build things but don't run them.
# * component_test_XXX: build and test.
# * component_release_XXX: tests that the CI should skip during PR testing.
# * support_XXX: if support_XXX exists and returns false then
# component_XXX is not run by default.
# Each component must start by invoking `msg` with a short informative message.
#
# Warning: due to the way bash detects errors, the failure of a command
# inside 'if' or '!' is not detected. Use the 'not' function instead of '!'.
#
# Each component is executed in a separate shell process. The component
# fails if any command in it returns a non-zero status.
#
# The framework in all.sh performs some cleanup tasks after each component.
# This means that components can assume that the working directory is in a
# cleaned-up state, and don't need to perform the cleanup themselves.
# * Run `make clean`.
# * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running
# the component.
# * Check out `Makefile`, `library/Makefile`, `programs/Makefile`,
# `tests/Makefile` and `programs/fuzz/Makefile` from git.
# This cleans up after an in-tree use of CMake.
#
# The tests are roughly in order from fastest to slowest. This doesn't
# have to be exact, but in general you should add slower tests towards
# the end and fast checks near the beginning.
################################################################
#### Build and test many configurations and targets
################################################################
################################################################
#### Basic checks
################################################################
#
# Test Suites to be executed
#
# The test ordering tries to optimize for the following criteria:
# 1. Catch possible problems early, by running first tests that run quickly
# and/or are more likely to fail than others (eg I use Clang most of the
# time, so start with a GCC build).
# 2. Minimize total running time, by avoiding useless rebuilds
#
# Indicative running times are given for reference.
################################################################
#### Build and test many configurations and targets
################################################################
component_test_default_out_of_box () {
msg "build: make, default config (out-of-box)" # ~1min
make
# Disable fancy stuff
unset MBEDTLS_TEST_OUTCOME_FILE
msg "test: main suites make, default config (out-of-box)" # ~10s
make test
msg "selftest: make, default config (out-of-box)" # ~10s
programs/test/selftest
msg "program demos: make, default config (out-of-box)" # ~10s
tests/scripts/run_demos.py
}
component_test_default_cmake_gcc_asan () {
msg "build: cmake, gcc, ASan" # ~ 1 min 50s
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "program demos (ASan build)" # ~10s
tests/scripts/run_demos.py
msg "test: selftest (ASan build)" # ~ 10s
programs/test/selftest
msg "test: metatests (GCC, ASan build)"
tests/scripts/run-metatests.sh any asan poison
msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
tests/ssl-opt.sh
msg "test: compat.sh (ASan build)" # ~ 6 min
tests/compat.sh
msg "test: context-info.sh (ASan build)" # ~ 15 sec
tests/context-info.sh
}
component_test_default_cmake_gcc_asan_new_bignum () {
msg "build: cmake, gcc, ASan" # ~ 1 min 50s
scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: selftest (ASan build)" # ~ 10s
programs/test/selftest
msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
tests/ssl-opt.sh
msg "test: compat.sh (ASan build)" # ~ 6 min
tests/compat.sh
msg "test: context-info.sh (ASan build)" # ~ 15 sec
tests/context-info.sh
}
component_test_full_cmake_gcc_asan () {
msg "build: full config, cmake, gcc, ASan"
scripts/config.py full
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (full config, ASan build)"
make test
msg "test: selftest (full config, ASan build)" # ~ 10s
programs/test/selftest
msg "test: ssl-opt.sh (full config, ASan build)"
tests/ssl-opt.sh
# Note: the next two invocations cover all compat.sh test cases.
# We should use the same here and in basic-build-test.sh.
msg "test: compat.sh: default version (full config, ASan build)"
tests/compat.sh -e 'ARIA\|CHACHA'
msg "test: compat.sh: next: ARIA, Chacha (full config, ASan build)"
env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec
tests/context-info.sh
}
component_test_full_cmake_gcc_asan_new_bignum () {
msg "build: full config, cmake, gcc, ASan"
scripts/config.py full
scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (full config, new bignum, ASan)"
make test
msg "test: selftest (full config, new bignum, ASan)" # ~ 10s
programs/test/selftest
msg "test: ssl-opt.sh (full config, new bignum, ASan)"
tests/ssl-opt.sh
# Note: the next two invocations cover all compat.sh test cases.
# We should use the same here and in basic-build-test.sh.
msg "test: compat.sh: default version (full config, new bignum, ASan)"
tests/compat.sh -e 'ARIA\|CHACHA'
msg "test: compat.sh: next: ARIA, Chacha (full config, new bignum, ASan)"
env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
msg "test: context-info.sh (full config, new bignum, ASan)" # ~ 15 sec
tests/context-info.sh
}
# Get a list of library-wise undefined symbols and ensure that they only
# belong to psa_xxx() functions and not to mbedtls_yyy() ones.
# This function is a common helper used by both:
# - component_test_default_psa_crypto_client_without_crypto_provider
# - component_build_full_psa_crypto_client_without_crypto_provider.
common_check_mbedtls_missing_symbols () {
nm library/libmbedcrypto.a | grep ' [TRrDC] ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_def.txt
nm library/libmbedcrypto.a | grep ' U ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_undef.txt
comm sym_def.txt sym_undef.txt -13 > linking_errors.txt
not grep mbedtls_ linking_errors.txt
rm sym_def.txt sym_undef.txt linking_errors.txt
}
component_test_default_psa_crypto_client_without_crypto_provider () {
msg "build: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py set MBEDTLS_PSA_CRYPTO_CLIENT
scripts/config.py unset MBEDTLS_LMS_C
make
msg "check missing symbols: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
common_check_mbedtls_missing_symbols
msg "test: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
make test
}
component_build_full_psa_crypto_client_without_crypto_provider () {
msg "build: full config - PSA_CRYPTO_C"
# Use full config which includes USE_PSA and CRYPTO_CLIENT.
scripts/config.py full
scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
# Dynamic secure element support is a deprecated feature and it is not
# available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled.
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
# Since there is no crypto provider in this build it is not possible to
# build all the test executables and progrems due to missing PSA functions
# at link time. Therefore we will just build libraries and we'll check
# that symbols of interest are there.
make lib
msg "check missing symbols: full config - PSA_CRYPTO_C"
common_check_mbedtls_missing_symbols
# Ensure that desired functions are included into the build (extend the
# following list as required).
grep mbedtls_pk_get_psa_attributes library/libmbedcrypto.a
grep mbedtls_pk_import_into_psa library/libmbedcrypto.a
grep mbedtls_pk_copy_from_psa library/libmbedcrypto.a
}
component_test_psa_crypto_rsa_no_genprime () {
msg "build: default config minus MBEDTLS_GENPRIME"
scripts/config.py unset MBEDTLS_GENPRIME
make
msg "test: default config minus MBEDTLS_GENPRIME"
make test
}
component_test_ref_configs () {
msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s
# test-ref-configs works by overwriting mbedtls_config.h; this makes cmake
# want to re-generate generated files that depend on it, quite correctly.
# However this doesn't work as the generation script expects a specific
# format for mbedtls_config.h, which the other files don't follow. Also,
# cmake can't know this, but re-generation is actually not necessary as
# the generated files only depend on the list of available options, not
# whether they're on or off. So, disable cmake's (over-sensitive here)
# dependency resolution for generated files and just rely on them being
# present (thanks to pre_generate_files) by turning GEN_FILES off.
CC=$ASAN_CC cmake -D GEN_FILES=Off -D CMAKE_BUILD_TYPE:String=Asan .
tests/scripts/test-ref-configs.pl
}
component_test_no_renegotiation () {
msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min
scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min
tests/ssl-opt.sh
}
component_test_sw_inet_pton () {
msg "build: default plus MBEDTLS_TEST_SW_INET_PTON"
# MBEDTLS_TEST_HOOKS required for x509_crt_parse_cn_inet_pton
scripts/config.py set MBEDTLS_TEST_HOOKS
make CFLAGS="-DMBEDTLS_TEST_SW_INET_PTON"
msg "test: default plus MBEDTLS_TEST_SW_INET_PTON"
make test
}
component_test_full_no_cipher_no_psa_crypto () {
msg "build: full no CIPHER no PSA_CRYPTO_C"
scripts/config.py full
scripts/config.py unset MBEDTLS_CIPHER_C
# Don't pull in cipher via PSA mechanisms
# (currently ignored anyway because we completely disable PSA)
scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
# Disable features that depend on CIPHER_C
scripts/config.py unset MBEDTLS_CMAC_C
scripts/config.py unset MBEDTLS_NIST_KW_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT
scripts/config.py unset MBEDTLS_SSL_TLS_C
scripts/config.py unset MBEDTLS_SSL_TICKET_C
# Disable features that depend on PSA_CRYPTO_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
msg "test: full no CIPHER no PSA_CRYPTO_C"
make test
}
# This is a common configurator and test function that is used in:
# - component_test_full_no_cipher_with_psa_crypto
# - component_test_full_no_cipher_with_psa_crypto_config
# It accepts 2 input parameters:
# - $1: boolean value which basically reflects status of MBEDTLS_PSA_CRYPTO_CONFIG
# - $2: a text string which describes the test component
common_test_full_no_cipher_with_psa_crypto () {
USE_CRYPTO_CONFIG="$1"
COMPONENT_DESCRIPTION="$2"
msg "build: $COMPONENT_DESCRIPTION"
scripts/config.py full
scripts/config.py unset MBEDTLS_CIPHER_C
if [ "$USE_CRYPTO_CONFIG" -eq 1 ]; then
# The built-in implementation of the following algs/key-types depends
# on CIPHER_C so we disable them.
# This does not hold for KEY_TYPE_CHACHA20 and ALG_CHACHA20_POLY1305
# so we keep them enabled.
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CMAC
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_NO_PADDING
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_PKCS7
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CFB
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CTR
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_ECB_NO_PADDING
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_OFB
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_STREAM_CIPHER
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_DES
else
# Don't pull in cipher via PSA mechanisms
scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
# Disable cipher modes/keys that make PSA depend on CIPHER_C.
# Keep CHACHA20 and CHACHAPOLY enabled since they do not depend on CIPHER_C.
scripts/config.py unset-all MBEDTLS_CIPHER_MODE
fi
# The following modules directly depends on CIPHER_C
scripts/config.py unset MBEDTLS_CMAC_C
scripts/config.py unset MBEDTLS_NIST_KW_C
make
# Ensure that CIPHER_C was not re-enabled
not grep mbedtls_cipher_init library/cipher.o
msg "test: $COMPONENT_DESCRIPTION"
make test
}
component_test_full_no_cipher_with_psa_crypto () {
common_test_full_no_cipher_with_psa_crypto 0 "full no CIPHER no CRYPTO_CONFIG"
}
component_test_full_no_cipher_with_psa_crypto_config () {
common_test_full_no_cipher_with_psa_crypto 1 "full no CIPHER"
}
component_test_full_no_bignum () {
msg "build: full minus bignum"
scripts/config.py full
scripts/config.py unset MBEDTLS_BIGNUM_C
# Direct dependencies of bignum
scripts/config.py unset MBEDTLS_ECP_C
scripts/config.py unset MBEDTLS_RSA_C
scripts/config.py unset MBEDTLS_DHM_C
# Direct dependencies of ECP
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_ECJPAKE_C
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
# Disable what auto-enables ECP_LIGHT
scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
# Indirect dependencies of ECP
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
# Direct dependencies of DHM
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
# Direct dependencies of RSA
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
# PK and its dependencies
scripts/config.py unset MBEDTLS_PK_C
scripts/config.py unset MBEDTLS_PK_PARSE_C
scripts/config.py unset MBEDTLS_PK_WRITE_C
scripts/config.py unset MBEDTLS_X509_USE_C
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_CRL_PARSE_C
scripts/config.py unset MBEDTLS_X509_CSR_PARSE_C
scripts/config.py unset MBEDTLS_X509_CREATE_C
scripts/config.py unset MBEDTLS_X509_CRT_WRITE_C
scripts/config.py unset MBEDTLS_X509_CSR_WRITE_C
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_SSL_ASYNC_PRIVATE
scripts/config.py unset MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
make
msg "test: full minus bignum"
make test
}
component_test_tls1_2_default_stream_cipher_only () {
msg "build: default with only stream cipher"
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
# Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only stream cipher"
make test
# Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
}
component_test_tls1_2_default_stream_cipher_only_use_psa () {
msg "build: default with only stream cipher use psa"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
# Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only stream cipher use psa"
make test
# Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
}
component_test_tls1_2_default_cbc_legacy_cipher_only () {
msg "build: default with only CBC-legacy cipher"
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
# Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only CBC-legacy cipher"
make test
msg "test: default with only CBC-legacy cipher - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f "TLS 1.2"
}
component_test_tls1_2_deafult_cbc_legacy_cipher_only_use_psa () {
msg "build: default with only CBC-legacy cipher use psa"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
# Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only CBC-legacy cipher use psa"
make test
msg "test: default with only CBC-legacy cipher use psa - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f "TLS 1.2"
}
component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () {
msg "build: default with only CBC-legacy and CBC-EtM ciphers"
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
# Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only CBC-legacy and CBC-EtM ciphers"
make test
msg "test: default with only CBC-legacy and CBC-EtM ciphers - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f "TLS 1.2"
}
component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only_use_psa () {
msg "build: default with only CBC-legacy and CBC-EtM ciphers use psa"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
# Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa"
make test
msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f "TLS 1.2"
}
# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
# that we could use for interop testing. However, we now have sort of two
# implementations ourselves: one using PSA, the other not. At least test that
# these two interoperate with each other.
component_test_tls1_2_ecjpake_compatibility () {
msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
# Explicitly make lib first to avoid a race condition:
# https://github.com/Mbed-TLS/mbedtls/issues/8229
make lib
make -C programs ssl/ssl_server2 ssl/ssl_client2
cp programs/ssl/ssl_server2 s2_no_use_psa
cp programs/ssl/ssl_client2 c2_no_use_psa
msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
make clean
make lib
make -C programs ssl/ssl_server2 ssl/ssl_client2
make -C programs test/udp_proxy test/query_compile_time_config
msg "test: server w/o USE_PSA - client w/ USE_PSA, text password"
P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password"
P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS"
msg "test: client w/o USE_PSA - server w/ USE_PSA, text password"
P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password"
P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS"
rm s2_no_use_psa c2_no_use_psa
}
component_test_small_ssl_out_content_len () {
msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests"
tests/ssl-opt.sh -f "Max fragment\|Large packet"
}
component_test_small_ssl_in_content_len () {
msg "build: small SSL_IN_CONTENT_LEN (ASan build)"
scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096
scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests"
tests/ssl-opt.sh -f "Max fragment"
}
component_test_small_ssl_dtls_max_buffering () {
msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0"
scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test"
tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg"
}
component_test_small_mbedtls_ssl_dtls_max_buffering () {
msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1"
scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test"
tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket"
}
component_test_full_cmake_clang () {
msg "build: cmake, full config, clang" # ~ 50s
scripts/config.py full
CC=clang CXX=clang cmake -D CMAKE_BUILD_TYPE:String=Release -D ENABLE_TESTING=On -D TEST_CPP=1 .
make
msg "test: main suites (full config, clang)" # ~ 5s
make test
msg "test: cpp_dummy_build (full config, clang)" # ~ 1s
programs/test/cpp_dummy_build
msg "test: metatests (clang)"
tests/scripts/run-metatests.sh any pthread
msg "program demos (full config, clang)" # ~10s
tests/scripts/run_demos.py
msg "test: psa_constant_names (full config, clang)" # ~ 1s
tests/scripts/test_psa_constant_names.py
msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s
tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private'
}
skip_suites_without_constant_flow () {
# Skip the test suites that don't have any constant-flow annotations.
# This will need to be adjusted if we ever start declaring things as
# secret from macros or functions inside tests/include or tests/src.
SKIP_TEST_SUITES=$(
git -C tests/suites grep -L TEST_CF_ 'test_suite_*.function' |
sed 's/test_suite_//; s/\.function$//' |
tr '\n' ,)
export SKIP_TEST_SUITES
}
skip_all_except_given_suite () {
# Skip all but the given test suite
SKIP_TEST_SUITES=$(
ls -1 tests/suites/test_suite_*.function |
grep -v $1.function |
sed 's/tests.suites.test_suite_//; s/\.function$//' |
tr '\n' ,)
export SKIP_TEST_SUITES
}
component_test_memsan_constant_flow () {
# This tests both (1) accesses to undefined memory, and (2) branches or
# memory access depending on secret values. To distinguish between those:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
# - or alternatively, change the build type to MemSanDbg, which enables
# origin tracking and nicer stack traces (which are useful for debugging
# anyway), and check if the origin was TEST_CF_SECRET() or something else.
msg "build: cmake MSan (clang), full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
make
msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO, Msan + constant flow)"
make test
}
component_test_memsan_constant_flow_psa () {
# This tests both (1) accesses to undefined memory, and (2) branches or
# memory access depending on secret values. To distinguish between those:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
# - or alternatively, change the build type to MemSanDbg, which enables
# origin tracking and nicer stack traces (which are useful for debugging
# anyway), and check if the origin was TEST_CF_SECRET() or something else.
msg "build: cmake MSan (clang), full config with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
make
msg "test: main suites (Msan + constant flow)"
make test
}
component_release_test_valgrind_constant_flow () {
# This tests both (1) everything that valgrind's memcheck usually checks
# (heap buffer overflows, use of uninitialized memory, use-after-free,
# etc.) and (2) branches or memory access depending on secret values,
# which will be reported as uninitialized memory. To distinguish between
# secret and actually uninitialized:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
# - or alternatively, build with debug info and manually run the offending
# test suite with valgrind --track-origins=yes, then check if the origin
# was TEST_CF_SECRET() or something else.
msg "build: cmake release GCC, full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
skip_suites_without_constant_flow
cmake -D CMAKE_BUILD_TYPE:String=Release .
make
# this only shows a summary of the results (how many of each type)
# details are left in Testing/<date>/DynamicAnalysis.xml
msg "test: some suites (full minus MBEDTLS_USE_PSA_CRYPTO, valgrind + constant flow)"
make memcheck
# Test asm path in constant time module - by default, it will test the plain C
# path under Valgrind or Memsan. Running only the constant_time tests is fast (<1s)
msg "test: valgrind asm constant_time"
scripts/config.py --force set MBEDTLS_TEST_CONSTANT_FLOW_ASM
skip_all_except_given_suite test_suite_constant_time
cmake -D CMAKE_BUILD_TYPE:String=Release .
make clean
make
make memcheck
}
component_release_test_valgrind_constant_flow_psa () {
# This tests both (1) everything that valgrind's memcheck usually checks
# (heap buffer overflows, use of uninitialized memory, use-after-free,
# etc.) and (2) branches or memory access depending on secret values,
# which will be reported as uninitialized memory. To distinguish between
# secret and actually uninitialized:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
# - or alternatively, build with debug info and manually run the offending
# test suite with valgrind --track-origins=yes, then check if the origin
# was TEST_CF_SECRET() or something else.
msg "build: cmake release GCC, full config with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
skip_suites_without_constant_flow
cmake -D CMAKE_BUILD_TYPE:String=Release .
make
# this only shows a summary of the results (how many of each type)
# details are left in Testing/<date>/DynamicAnalysis.xml
msg "test: some suites (valgrind + constant flow)"
make memcheck
}
component_test_tsan () {
msg "build: TSan (clang)"
scripts/config.py full
scripts/config.py set MBEDTLS_THREADING_C
scripts/config.py set MBEDTLS_THREADING_PTHREAD
# Self-tests do not currently use multiple threads.
scripts/config.py unset MBEDTLS_SELF_TEST
# The deprecated MBEDTLS_PSA_CRYPTO_SE_C interface is not thread safe.
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
CC=clang cmake -D CMAKE_BUILD_TYPE:String=TSan .
make
msg "test: main suites (TSan)"
make test
}
component_test_default_no_deprecated () {
# Test that removing the deprecated features from the default
# configuration leaves something consistent.
msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s
scripts/config.py set MBEDTLS_DEPRECATED_REMOVED
make CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s
make test
}
component_test_full_no_deprecated () {
msg "build: make, full_no_deprecated config" # ~ 30s
scripts/config.py full_no_deprecated
make CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, full_no_deprecated config" # ~ 5s
make test
msg "test: ensure that X509 has no direct dependency on BIGNUM_C"
not grep mbedtls_mpi library/libmbedx509.a
}
component_test_full_no_deprecated_deprecated_warning () {
# Test that there is nothing deprecated in "full_no_deprecated".
# A deprecated feature would trigger a warning (made fatal) from
# MBEDTLS_DEPRECATED_WARNING.
msg "build: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 30s
scripts/config.py full_no_deprecated
scripts/config.py unset MBEDTLS_DEPRECATED_REMOVED
scripts/config.py set MBEDTLS_DEPRECATED_WARNING
make CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 5s
make test
}
component_test_full_deprecated_warning () {
# Test that when MBEDTLS_DEPRECATED_WARNING is enabled, the build passes
# with only certain whitelisted types of warnings.
msg "build: make, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
scripts/config.py full
scripts/config.py set MBEDTLS_DEPRECATED_WARNING
# Expect warnings from '#warning' directives in check_config.h.
# Note that gcc is required to allow the use of -Wno-error=cpp, which allows us to
# display #warning messages without them being treated as errors.
make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=cpp' lib programs
msg "build: make tests, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
# Set MBEDTLS_TEST_DEPRECATED to enable tests for deprecated features.
# By default those are disabled when MBEDTLS_DEPRECATED_WARNING is set.
# Expect warnings from '#warning' directives in check_config.h and
# from the use of deprecated functions in test suites.
make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=deprecated-declarations -Wno-error=cpp -DMBEDTLS_TEST_DEPRECATED' tests
msg "test: full config + MBEDTLS_TEST_DEPRECATED" # ~ 30s
make test
msg "program demos: full config + MBEDTLS_TEST_DEPRECATED" # ~10s
tests/scripts/run_demos.py
}
component_build_baremetal () {
msg "build: make, baremetal config"
scripts/config.py baremetal
make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/"
}
support_build_baremetal () {
# Older Glibc versions include time.h from other headers such as stdlib.h,
# which makes the no-time.h-in-baremetal check fail. Ubuntu 16.04 has this
# problem, Ubuntu 18.04 is ok.
! grep -q -F time.h /usr/include/x86_64-linux-gnu/sys/types.h
}
component_test_depends_py_kex () {
msg "test/build: depends.py kex (gcc)"
tests/scripts/depends.py kex --unset-use-psa
}
component_test_depends_py_kex_psa () {
msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py kex
}
component_build_dhm_alt () {
msg "build: MBEDTLS_DHM_ALT" # ~30s
scripts/config.py full
scripts/config.py set MBEDTLS_DHM_ALT
# debug.c currently references mbedtls_dhm_context fields directly.
scripts/config.py unset MBEDTLS_DEBUG_C
# We can only compile, not link, since we don't have any implementations
# suitable for testing with the dummy alt headers.
make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib
}
component_test_no_psa_crypto_full_cmake_asan () {
# full minus MBEDTLS_PSA_CRYPTO_C: run the same set of tests as basic-build-test.sh
msg "build: cmake, full config minus PSA crypto, ASan"
scripts/config.py full
scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (full minus PSA crypto)"
make test
# Note: ssl-opt.sh has some test cases that depend on
# MBEDTLS_ECP_RESTARTABLE && !MBEDTLS_USE_PSA_CRYPTO
# This is the only component where those tests are not skipped.
msg "test: ssl-opt.sh (full minus PSA crypto)"
tests/ssl-opt.sh
# Note: the next two invocations cover all compat.sh test cases.
# We should use the same here and in basic-build-test.sh.
msg "test: compat.sh: default version (full minus PSA crypto)"
tests/compat.sh -e 'ARIA\|CHACHA'
msg "test: compat.sh: next: ARIA, Chacha (full minus PSA crypto)"
env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
}
# Common helper for component_full_without_ecdhe_ecdsa() and
# component_full_without_ecdhe_ecdsa_and_tls13() which:
# - starts from the "full" configuration minus the list of symbols passed in
# as 1st parameter
# - build
# - test only TLS (i.e. test_suite_tls and ssl-opt)
build_full_minus_something_and_test_tls () {
symbols_to_disable="$1"
msg "build: full minus something, test TLS"
scripts/config.py full
for sym in $symbols_to_disable; do
echo "Disabling $sym"
scripts/config.py unset $sym
done
make
msg "test: full minus something, test TLS"
( cd tests; ./test_suite_ssl )
msg "ssl-opt: full minus something, test TLS"
tests/ssl-opt.sh
}
component_full_without_ecdhe_ecdsa () {
build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED"
}
component_full_without_ecdhe_ecdsa_and_tls13 () {
build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
MBEDTLS_SSL_PROTO_TLS1_3"
}
component_test_psa_crypto_config_accel_hash_keep_builtins () {
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
# This component ensures that all the test cases for
# md_psa_dynamic_dispatch with legacy+driver in test_suite_md are run.
loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
# Start from default config (no USE_PSA)
helper_libtestdriver1_adjust_config "default"
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
make test
}
# This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test.
component_build_psa_accel_alg_ecdh () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test.
component_build_psa_accel_alg_hmac () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test.
component_build_psa_accel_alg_hkdf () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_HKDF_C
# Make sure to unset TLS1_3 since it requires HKDF_C and will not build properly without it.
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test.
component_build_psa_accel_alg_md5 () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD5 - other hashes"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test.
component_build_psa_accel_alg_ripemd160 () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RIPEMD160 - other hashes"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test.
component_build_psa_accel_alg_sha1 () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_1 - other hashes"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test.
component_build_psa_accel_alg_sha224 () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_224 - other hashes"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test.
component_build_psa_accel_alg_sha256 () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_256 - other hashes"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test.
component_build_psa_accel_alg_sha384 () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_384 - other hashes"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test.
component_build_psa_accel_alg_sha512 () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_512 - other hashes"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_pkcs1v15_crypt () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_pkcs1v15_sign () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_oaep () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_OAEP 1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_pss () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_key_type_rsa_key_pair () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx + PSA_WANT_ALG_RSA_PSS"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC 1
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT 1
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT 1
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE 1
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_key_type_rsa_public_key () {
msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1
# Need to define the correct symbol and include the test driver header path in order to build with the test driver
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
}
component_build_tfm () {
# Check that the TF-M configuration can build cleanly with various
# warning flags enabled. We don't build or run tests, since the
# TF-M configuration needs a TF-M platform. A tweaked version of
# the configuration that works on mainstream platforms is in
# configs/config-tfm.h, tested via test-ref-configs.pl.
cp configs/config-tfm.h "$CONFIG_H"
msg "build: TF-M config, clang, armv7-m thumb2"
make lib CC="clang" CFLAGS="--target=arm-linux-gnueabihf -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
msg "build: TF-M config, gcc native build"
make clean
make lib CC="gcc" CFLAGS="-Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wformat-signedness -Wlogical-op -I../tests/include/spe"
}
component_test_no_platform () {
# Full configuration build, without platform support, file IO and net sockets.
# This should catch missing mbedtls_printf definitions, and by disabling file
# IO, it should catch missing '#include <stdio.h>'
msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s
scripts/config.py full_no_platform
scripts/config.py unset MBEDTLS_PLATFORM_C
scripts/config.py unset MBEDTLS_NET_C
scripts/config.py unset MBEDTLS_FS_IO
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
# Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19,
# to re-enable platform integration features otherwise disabled in C99 builds
make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs
make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test
}
component_build_no_std_function () {
# catch compile bugs in _uninit functions
msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s
scripts/config.py full
scripts/config.py set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check .
make
}
component_build_no_ssl_srv () {
msg "build: full config except SSL server, make, gcc" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_SSL_SRV_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
}
component_build_no_ssl_cli () {
msg "build: full config except SSL client, make, gcc" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_SSL_CLI_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
}
component_build_no_sockets () {
# Note, C99 compliance can also be tested with the sockets support disabled,
# as that requires a POSIX platform (which isn't the same as C99).
msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc.
scripts/config.py set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib
}
component_test_memory_buffer_allocator_backtrace () {
msg "build: default config with memory buffer allocator and backtrace enabled"
scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
scripts/config.py set MBEDTLS_MEMORY_BACKTRACE
scripts/config.py set MBEDTLS_MEMORY_DEBUG
cmake -DCMAKE_BUILD_TYPE:String=Release .
make
msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE"
make test
}
component_test_memory_buffer_allocator () {
msg "build: default config with memory buffer allocator"
scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
cmake -DCMAKE_BUILD_TYPE:String=Release .
make
msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C"
make test
msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C"
# MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out.
tests/ssl-opt.sh -e '^DTLS proxy'
}
component_test_no_max_fragment_length () {
# Run max fragment length tests with MFL disabled
msg "build: default config except MFL extension (ASan build)" # ~ 30s
scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: ssl-opt.sh, MFL-related tests"
tests/ssl-opt.sh -f "Max fragment length"
}
component_test_asan_remove_peer_certificate () {
msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)"
scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
make test
msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
tests/ssl-opt.sh
msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
tests/compat.sh
msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
tests/context-info.sh
}
component_test_no_max_fragment_length_small_ssl_out_content_len () {
msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)"
scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MFL tests (disabled MFL extension case) & large packet tests"
tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
msg "test: context-info.sh (disabled MFL extension case)"
tests/context-info.sh
}
component_test_variable_ssl_in_out_buffer_len () {
msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)"
scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
make test
msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
tests/ssl-opt.sh
msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
tests/compat.sh
}
component_test_dtls_cid_legacy () {
msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)"
scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)"
make test
msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
tests/ssl-opt.sh
msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
tests/compat.sh
}
component_test_ssl_alloc_buffer_and_mfl () {
msg "build: default config with memory buffer allocator and MFL extension"
scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
scripts/config.py set MBEDTLS_MEMORY_DEBUG
scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
cmake -DCMAKE_BUILD_TYPE:String=Release .
make
msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
make test
msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
tests/ssl-opt.sh -f "Handshake memory usage"
}
component_test_when_no_ciphersuites_have_mac () {
msg "build: when no ciphersuites have MAC"
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
scripts/config.py unset MBEDTLS_CMAC_C
make
msg "test: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
make test
msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM'
}
component_test_no_date_time () {
msg "build: default config without MBEDTLS_HAVE_TIME_DATE"
scripts/config.py unset MBEDTLS_HAVE_TIME_DATE
cmake -D CMAKE_BUILD_TYPE:String=Check .
make
msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites"
make test
}
component_test_platform_calloc_macro () {
msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
scripts/config.py set MBEDTLS_PLATFORM_CALLOC_MACRO calloc
scripts/config.py set MBEDTLS_PLATFORM_FREE_MACRO free
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
make test
}
component_test_malloc_0_null () {
msg "build: malloc(0) returns NULL (ASan+UBSan build)"
scripts/config.py full
make CC=$ASAN_CC CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"$PWD/tests/configs/user-config-malloc-0-null.h\"' $ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: malloc(0) returns NULL (ASan+UBSan build)"
make test
msg "selftest: malloc(0) returns NULL (ASan+UBSan build)"
# Just the calloc selftest. "make test" ran the others as part of the
# test suites.
programs/test/selftest calloc
msg "test ssl-opt.sh: malloc(0) returns NULL (ASan+UBSan build)"
# Run a subset of the tests. The choice is a balance between coverage
# and time (including time indirectly wasted due to flaky tests).
# The current choice is to skip tests whose description includes
# "proxy", which is an approximation of skipping tests that use the
# UDP proxy, which tend to be slower and flakier.
tests/ssl-opt.sh -e 'proxy'
}
support_test_aesni () {
# Check that gcc targets x86_64 (we can build AESNI), and check for
# AESNI support on the host (we can run AESNI).
#
# The name of this function is possibly slightly misleading, but needs to align
# with the name of the corresponding test, component_test_aesni.
#
# In principle 32-bit x86 can support AESNI, but our implementation does not
# support 32-bit x86, so we check for x86-64.
# We can only grep /proc/cpuinfo on Linux, so this also checks for Linux
(gcc -v 2>&1 | grep Target | grep -q x86_64) &&
[[ "$HOSTTYPE" == "x86_64" && "$OSTYPE" == "linux-gnu" ]] &&
(lscpu | grep -qw aes)
}
component_test_aesni () { # ~ 60s
# This tests the two AESNI implementations (intrinsics and assembly), and also the plain C
# fallback. It also tests the logic that is used to select which implementation(s) to build.
#
# This test does not require the host to have support for AESNI (if it doesn't, the run-time
# AESNI detection will fallback to the plain C implementation, so the tests will instead
# exercise the plain C impl).
msg "build: default config with different AES implementations"
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
scripts/config.py set MBEDTLS_HAVE_ASM
# test the intrinsics implementation
msg "AES tests, test intrinsics"
make clean
make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
# check that we built intrinsics - this should be used by default when supported by the compiler
./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
# test the asm implementation
msg "AES tests, test assembly"
make clean
make CC=gcc CFLAGS='-Werror -Wall -Wextra -mno-pclmul -mno-sse2 -mno-aes'
# check that we built assembly - this should be built if the compiler does not support intrinsics
./programs/test/selftest aes | grep "AESNI code" | grep -q "assembly"
# test the plain C implementation
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
msg "AES tests, plain C"
make clean
make CC=gcc CFLAGS='-O2 -Werror'
# check that there is no AESNI code present
./programs/test/selftest aes | not grep -q "AESNI code"
not grep -q "AES note: using AESNI" ./programs/test/selftest
grep -q "AES note: built-in implementation." ./programs/test/selftest
# test the intrinsics implementation
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "AES tests, test AESNI only"
make clean
make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
./programs/test/selftest aes | grep -q "AES note: using AESNI"
./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
grep -q "AES note: using AESNI" ./programs/test/selftest
not grep -q "AES note: built-in implementation." ./programs/test/selftest
}
support_test_aesni_m32 () {
support_test_m32_no_asm && (lscpu | grep -qw aes)
}
component_test_aesni_m32 () { # ~ 60s
# This tests are duplicated from component_test_aesni for i386 target
#
# AESNI intrinsic code supports i386 and assembly code does not support it.
msg "build: default config with different AES implementations"
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py set MBEDTLS_PADLOCK_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
scripts/config.py set MBEDTLS_HAVE_ASM
# test the intrinsics implementation with gcc
msg "AES tests, test intrinsics (gcc)"
make clean
make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32'
# check that we built intrinsics - this should be used by default when supported by the compiler
./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
grep -q "AES note: using AESNI" ./programs/test/selftest
grep -q "AES note: built-in implementation." ./programs/test/selftest
grep -q "AES note: using VIA Padlock" ./programs/test/selftest
grep -q mbedtls_aesni_has_support ./programs/test/selftest
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_PADLOCK_C
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "AES tests, test AESNI only"
make clean
make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra -mpclmul -msse2 -maes' LDFLAGS='-m32'
./programs/test/selftest aes | grep -q "AES note: using AESNI"
./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
grep -q "AES note: using AESNI" ./programs/test/selftest
not grep -q "AES note: built-in implementation." ./programs/test/selftest
not grep -q "AES note: using VIA Padlock" ./programs/test/selftest
not grep -q mbedtls_aesni_has_support ./programs/test/selftest
}
support_test_aesni_m32_clang () {
# clang >= 4 is required to build with target attributes
support_test_aesni_m32 && [[ $(clang_version) -ge 4 ]]
}
component_test_aesni_m32_clang () {
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py set MBEDTLS_PADLOCK_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
scripts/config.py set MBEDTLS_HAVE_ASM
# test the intrinsics implementation with clang
msg "AES tests, test intrinsics (clang)"
make clean
make CC=clang CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32'
# check that we built intrinsics - this should be used by default when supported by the compiler
./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
grep -q "AES note: using AESNI" ./programs/test/selftest
grep -q "AES note: built-in implementation." ./programs/test/selftest
grep -q "AES note: using VIA Padlock" ./programs/test/selftest
grep -q mbedtls_aesni_has_support ./programs/test/selftest
}
support_build_aes_armce () {
# clang >= 11 is required to build with AES extensions
[[ $(clang_version) -ge 11 ]]
}
component_build_aes_armce () {
# Test variations of AES with Armv8 crypto extensions
scripts/config.py set MBEDTLS_AESCE_C
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
# test for presence of AES instructions
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "clang, test A32 crypto instructions built"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
msg "clang, test T32 crypto instructions built"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
msg "clang, test aarch64 crypto instructions built"
make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
# test for absence of AES instructions
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
scripts/config.py unset MBEDTLS_AESCE_C
msg "clang, test A32 crypto instructions not built"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
msg "clang, test T32 crypto instructions not built"
make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
msg "clang, test aarch64 crypto instructions not built"
make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
not grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
}
support_build_sha_armce () {
# clang >= 4 is required to build with SHA extensions
[[ $(clang_version) -ge 4 ]]
}
component_build_sha_armce () {
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
# Test variations of SHA256 Armv8 crypto extensions
scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, aarch64"
make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, arm"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
# test the deprecated form of the config option
scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
msg "MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY clang, thumb"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT clang, aarch64"
make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
# test the deprecated form of the config option
scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, arm"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -std=c99"
msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, thumb"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
# examine the disassembly for presence of SHA instructions
for opt in MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT; do
scripts/config.py set ${opt}
msg "${opt} clang, test A32 crypto instructions built"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
msg "${opt} clang, test T32 crypto instructions built"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
msg "${opt} clang, test aarch64 crypto instructions built"
make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
scripts/config.py unset ${opt}
done
# examine the disassembly for absence of SHA instructions
msg "clang, test A32 crypto instructions not built"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
msg "clang, test T32 crypto instructions not built"
make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
msg "clang, test aarch64 crypto instructions not built"
make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
not grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
}
# For timebeing, no VIA Padlock platform available.
component_build_aes_via_padlock () {
msg "AES:VIA PadLock, build with default configuration."
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py set MBEDTLS_PADLOCK_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
grep -q mbedtls_padlock_has_support ./programs/test/selftest
}
support_build_aes_via_padlock_only () {
( [ "$MBEDTLS_TEST_PLATFORM" == "Linux-x86_64" ] || \
[ "$MBEDTLS_TEST_PLATFORM" == "Linux-amd64" ] ) && \
[ "`dpkg --print-foreign-architectures`" == "i386" ]
}
component_build_mbedtls_config_file () {
msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s
scripts/config.py -w full_config.h full
echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H"
make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'"
# Make sure this feature is enabled. We'll disable it in the next phase.
programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
make clean
msg "build: make with MBEDTLS_CONFIG_FILE + MBEDTLS_USER_CONFIG_FILE"
# In the user config, disable one feature (for simplicity, pick a feature
# that nothing else depends on).
echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"' -DMBEDTLS_USER_CONFIG_FILE='\"user_config.h\"'"
not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
rm -f user_config.h full_config.h
}
component_test_m32_no_asm () {
# Build without assembly, so as to use portable C code (in a 32-bit
# build) and not the i386-specific inline assembly.
#
# Note that we require gcc, because clang Asan builds fail to link for
# this target (cannot find libclang_rt.lsan-i386.a - this is a known clang issue).
msg "build: i386, make, gcc, no asm (ASan build)" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_PADLOCK_C
scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, make, gcc, no asm (ASan build)"
make test
}
support_test_m32_no_asm () {
case $(uname -m) in
amd64|x86_64) true;;
*) false;;
esac
}
component_test_m32_o2 () {
# Build with optimization, to use the i386 specific inline assembly
# and go faster for tests.
msg "build: i386, make, gcc -O2 (ASan build)" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, make, gcc -O2 (ASan build)"
make test
msg "test ssl-opt.sh, i386, make, gcc-O2"
tests/ssl-opt.sh
}
support_test_m32_o2 () {
support_test_m32_no_asm "$@"
}
component_test_m32_everest () {
msg "build: i386, Everest ECDH context (ASan build)" # ~ 6 min
scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: i386, Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s
tests/ssl-opt.sh -f ECDH
msg "test: i386, Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min
# Exclude some symmetric ciphers that are redundant here to gain time.
tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA'
}
support_test_m32_everest () {
support_test_m32_no_asm "$@"
}
component_test_mx32 () {
msg "build: 64-bit ILP32, make, gcc" # ~ 30s
scripts/config.py full
make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -mx32' LDFLAGS='-mx32'
msg "test: 64-bit ILP32, make, gcc"
make test
}
support_test_mx32 () {
case $(uname -m) in
amd64|x86_64) true;;
*) false;;
esac
}
component_test_have_int32 () {
msg "build: gcc, force 32-bit bignum limbs"
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_PADLOCK_C
scripts/config.py unset MBEDTLS_AESCE_C
make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32'
msg "test: gcc, force 32-bit bignum limbs"
make test
}
component_test_have_int64 () {
msg "build: gcc, force 64-bit bignum limbs"
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_PADLOCK_C
scripts/config.py unset MBEDTLS_AESCE_C
make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64'
msg "test: gcc, force 64-bit bignum limbs"
make test
}
component_test_have_int32_cmake_new_bignum () {
msg "build: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_PADLOCK_C
scripts/config.py unset MBEDTLS_AESCE_C
scripts/config.py set MBEDTLS_TEST_HOOKS
scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
make CC=gcc CFLAGS="$ASAN_CFLAGS -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32" LDFLAGS="$ASAN_CFLAGS"
msg "test: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
make test
}
component_test_no_udbl_division () {
msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
scripts/config.py full
scripts/config.py set MBEDTLS_NO_UDBL_DIVISION
make CFLAGS='-Werror -O1'
msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
make test
}
component_test_no_64bit_multiplication () {
msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
scripts/config.py full
scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION
make CFLAGS='-Werror -O1'
msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
make test
}
component_test_no_strings () {
msg "build: no strings" # ~10s
scripts/config.py full
# Disable options that activate a large amount of string constants.
scripts/config.py unset MBEDTLS_DEBUG_C
scripts/config.py unset MBEDTLS_ERROR_C
scripts/config.py set MBEDTLS_ERROR_STRERROR_DUMMY
scripts/config.py unset MBEDTLS_VERSION_FEATURES
make CFLAGS='-Werror -Os'
msg "test: no strings" # ~ 10s
make test
}
component_test_no_x509_info () {
msg "build: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
scripts/config.pl full
scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests
scripts/config.pl set MBEDTLS_X509_REMOVE_INFO
make CFLAGS='-Werror -O2'
msg "test: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
make test
msg "test: ssl-opt.sh, full + MBEDTLS_X509_REMOVE_INFO" # ~ 1 min
tests/ssl-opt.sh
}
component_build_arm_none_eabi_gcc () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" # ~ 10s
scripts/config.py baremetal
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -O1' lib
msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug"
${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
}
component_build_arm_linux_gnueabi_gcc_arm5vte () {
msg "build: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s
scripts/config.py baremetal
# Build for a target platform that's close to what Debian uses
# for its "armel" distribution (https://wiki.debian.org/ArmEabiPort).
# See https://github.com/Mbed-TLS/mbedtls/pull/2169 and comments.
# Build everything including programs, see for example
# https://github.com/Mbed-TLS/mbedtls/pull/3449#issuecomment-675313720
make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" AR="${ARM_LINUX_GNUEABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te'
msg "size: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug"
${ARM_LINUX_GNUEABI_GCC_PREFIX}size -t library/*.o
}
support_build_arm_linux_gnueabi_gcc_arm5vte () {
type ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc >/dev/null 2>&1
}
component_build_arm_none_eabi_gcc_arm5vte () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s
scripts/config.py baremetal
# This is an imperfect substitute for
# component_build_arm_linux_gnueabi_gcc_arm5vte
# in case the gcc-arm-linux-gnueabi toolchain is not available
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-std=c99 -Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib
msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug"
${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
}
component_build_arm_none_eabi_gcc_m0plus () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus, baremetal_size" # ~ 10s
scripts/config.py baremetal_size
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib
msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os, baremetal_size"
${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
for lib in library/*.a; do
echo "$lib:"
${ARM_NONE_EABI_GCC_PREFIX}size -t $lib | grep TOTALS
done
}
component_build_arm_none_eabi_gcc_no_udbl_division () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s
scripts/config.py baremetal
scripts/config.py set MBEDTLS_NO_UDBL_DIVISION
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra' lib
echo "Checking that software 64-bit division is not required"
not grep __aeabi_uldiv library/*.o
}
component_build_arm_none_eabi_gcc_no_64bit_multiplication () {
msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc MBEDTLS_NO_64BIT_MULTIPLICATION, make" # ~ 10s
scripts/config.py baremetal
scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION
make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -O1 -march=armv6-m -mthumb' lib
echo "Checking that software 64-bit multiplication is not required"
not grep __aeabi_lmul library/*.o
}
component_build_arm_clang_thumb () {
# ~ 30s
scripts/config.py baremetal
msg "build: clang thumb 2, make"
make clean
make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -march=armv7-m -mthumb' lib
# Some Thumb 1 asm is sensitive to optimisation level, so test both -O0 and -Os
msg "build: clang thumb 1 -O0, make"
make clean
make CC="clang" CFLAGS='-std=c99 -Werror -O0 --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib
msg "build: clang thumb 1 -Os, make"
make clean
make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib
}
component_build_armcc () {
msg "build: ARM Compiler 5"
scripts/config.py baremetal
# armc[56] don't support SHA-512 intrinsics
scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
# older versions of armcc/armclang don't support AESCE_C on 32-bit Arm
scripts/config.py unset MBEDTLS_AESCE_C
# Stop armclang warning about feature detection for A64_CRYPTO.
# With this enabled, the library does build correctly under armclang,
# but in baremetal builds (as tested here), feature detection is
# unavailable, and the user is notified via a #warning. So enabling
# this feature would prevent us from building with -Werror on
# armclang. Tracked in #7198.
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
scripts/config.py set MBEDTLS_HAVE_ASM
make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib
msg "size: ARM Compiler 5"
"$ARMC5_FROMELF" -z library/*.o
# Compile mostly with -O1 since some Arm inline assembly is disabled for -O0.
# ARM Compiler 6 - Target ARMv7-A
armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a"
# ARM Compiler 6 - Target ARMv7-M
armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m"
# ARM Compiler 6 - Target ARMv7-M+DSP
armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp"
# ARM Compiler 6 - Target ARMv8-A - AArch32
armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a"
# ARM Compiler 6 - Target ARMv8-M
armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main"
# ARM Compiler 6 - Target Cortex-M0 - no optimisation
armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0"
# ARM Compiler 6 - Target Cortex-M0
armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0"
# ARM Compiler 6 - Target ARMv8.2-A - AArch64
#
# Re-enable MBEDTLS_AESCE_C as this should be supported by the version of armclang
# that we have in our CI
scripts/config.py set MBEDTLS_AESCE_C
armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto"
}
support_build_armcc () {
armc5_cc="$ARMC5_BIN_DIR/armcc"
armc6_cc="$ARMC6_BIN_DIR/armclang"
(check_tools "$armc5_cc" "$armc6_cc" > /dev/null 2>&1)
}
component_test_tls12_only () {
msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_3, cmake, gcc, ASan"
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (ASan build)"
make test
msg "test: ssl-opt.sh (ASan build)"
tests/ssl-opt.sh
msg "test: compat.sh (ASan build)"
tests/compat.sh
}
component_test_tls13_only () {
msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_2"
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test: TLS 1.3 only, all key exchange modes enabled"
make test
msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled"
tests/ssl-opt.sh
}
component_test_tls13_only_psk () {
msg "build: TLS 1.3 only from default, only PSK key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_DHM_C
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled"
tests/ssl-opt.sh
}
component_test_tls13_only_ephemeral () {
msg "build: TLS 1.3 only from default, only ephemeral key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_ephemeral_ffdh () {
msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
scripts/config.py unset MBEDTLS_ECDH_C
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_psk_ephemeral () {
msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_psk_ephemeral_ffdh () {
msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
scripts/config.py unset MBEDTLS_ECDH_C
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_psk_all () {
msg "build: TLS 1.3 only from default, without ephemeral key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
tests/ssl-opt.sh
}
component_test_tls13_only_ephemeral_all () {
msg "build: TLS 1.3 only from default, without PSK key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
tests/ssl-opt.sh
}
component_test_tls13_no_padding () {
msg "build: default config plus early data minus padding"
scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: default config plus early data minus padding"
make test
msg "ssl-opt.sh (TLS 1.3 no padding)"
tests/ssl-opt.sh
}
component_test_tls13_no_compatibility_mode () {
msg "build: default config plus early data minus middlebox compatibility mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: default config plus early data minus middlebox compatibility mode"
make test
msg "ssl-opt.sh (TLS 1.3 no compatibility mode)"
tests/ssl-opt.sh
}
component_test_full_minus_session_tickets () {
msg "build: full config without session tickets"
scripts/config.py full
scripts/config.py unset MBEDTLS_SSL_SESSION_TICKETS
scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: full config without session tickets"
make test
msg "ssl-opt.sh (full config without session tickets)"
tests/ssl-opt.sh
}
component_test_memsan () {
msg "build: MSan (clang)" # ~ 1 min 20s
scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
make
msg "test: main suites (MSan)" # ~ 10s
make test
msg "test: metatests (MSan)"
tests/scripts/run-metatests.sh any msan
msg "program demos (MSan)" # ~20s
tests/scripts/run_demos.py
msg "test: ssl-opt.sh (MSan)" # ~ 1 min
tests/ssl-opt.sh
# Optional part(s)
if [ "$MEMORY" -gt 0 ]; then
msg "test: compat.sh (MSan)" # ~ 6 min 20s
tests/compat.sh
fi
}
component_release_test_valgrind () {
msg "build: Release (clang)"
# default config, in particular without MBEDTLS_USE_PSA_CRYPTO
CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
make
msg "test: main suites, Valgrind (default config)"
make memcheck
# Optional parts (slow; currently broken on OS X because programs don't
# seem to receive signals under valgrind on OS X).
# These optional parts don't run on the CI.
if [ "$MEMORY" -gt 0 ]; then
msg "test: ssl-opt.sh --memcheck (default config)"
tests/ssl-opt.sh --memcheck
fi
if [ "$MEMORY" -gt 1 ]; then
msg "test: compat.sh --memcheck (default config)"
tests/compat.sh --memcheck
fi
if [ "$MEMORY" -gt 0 ]; then
msg "test: context-info.sh --memcheck (default config)"
tests/context-info.sh --memcheck
fi
}
component_release_test_valgrind_psa () {
msg "build: Release, full (clang)"
# full config, in particular with MBEDTLS_USE_PSA_CRYPTO
scripts/config.py full
CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
make
msg "test: main suites, Valgrind (full config)"
make memcheck
}