diff --git a/.travis.yml b/.travis.yml
index cdf74c7..eb01a44 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -55,8 +55,8 @@
         # Exclude a few test cases that are failing mysteriously.
         # https://github.com/Mbed-TLS/mbedtls/issues/6660
         - tests/ssl-opt.sh -e 'Fallback SCSV:\ .*list'
-        # Modern OpenSSL does not support fixed ECDH, null or ancient ciphers.
-        - tests/compat.sh -p OpenSSL -e 'NULL\|ECDH-\|DES\|RC4'
+        # Modern OpenSSL does not support null or ancient ciphers.
+        - tests/compat.sh -p OpenSSL -e 'NULL\|DES\|RC4'
         - tests/scripts/travis-log-failure.sh
         # GnuTLS supports CAMELLIA but compat.sh doesn't properly enable it.
         # Modern GnuTLS does not support DES.
diff --git a/ChangeLog b/ChangeLog
index 3673f5d..23be7dd 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -6,11 +6,11 @@
    * Fix potential heap buffer overread and overwrite in DTLS if
      MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and
      MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX.
-   * An adversary with access to precise enough information about memory
-     accesses (typically, an untrusted operating system attacking a secure
-     enclave) could recover an RSA private key after observing the victim
-     performing a single private-key operation if the window size used for the
-     exponentiation was 3 or smaller. Found and reported by Zili KOU,
+   * Fix an issue where an adversary with access to precise enough information
+     about memory accesses (typically, an untrusted operating system attacking
+     a secure enclave) could recover an RSA private key after observing the
+     victim performing a single private-key operation if the window size used
+     for the exponentiation was 3 or smaller. Found and reported by Zili KOU,
      Wenjian HE, Sharad Sinha, and Wei ZHANG. See "Cache Side-channel Attacks
      and Defenses of the Sliding Window Algorithm in TEEs" - Design, Automation
      and Test in Europe 2023.
@@ -337,16 +337,17 @@
    * It was possible to configure MBEDTLS_ECP_MAX_BITS to a value that is
      too small, leading to buffer overflows in ECC operations. Fail the build
      in such a case.
-   * An adversary with access to precise enough information about memory
-     accesses (typically, an untrusted operating system attacking a secure
-     enclave) could recover an RSA private key after observing the victim
-     performing a single private-key operation. Found and reported by
+   * Fix an issue where an adversary with access to precise enough information
+     about memory accesses (typically, an untrusted operating system attacking
+     a secure enclave) could recover an RSA private key after observing the
+     victim performing a single private-key operation. Found and reported by
      Zili KOU, Wenjian HE, Sharad Sinha, and Wei ZHANG.
-   * An adversary with access to precise enough timing information (typically, a
-     co-located process) could recover a Curve25519 or Curve448 static ECDH key
-     after inputting a chosen public key and observing the victim performing the
-     corresponding private-key operation. Found and reported by Leila Batina,
-     Lukas Chmielewski, Björn Haase, Niels Samwel and Peter Schwabe.
+   * Fix an issue where an adversary with access to precise enough timing
+     information (typically, a co-located process) could recover a Curve25519
+     or Curve448 static ECDH key after inputting a chosen public key and
+     observing the victim performing the corresponding private-key operation.
+     Found and reported by Leila Batina, Lukas Chmielewski, Björn Haase, Niels
+     Samwel and Peter Schwabe.
 
 Bugfix
    * Add printf function attributes to mbedtls_debug_print_msg to ensure we
diff --git a/ChangeLog.d/clang-15-bignum-warning.txt b/ChangeLog.d/clang-15-bignum-warning.txt
new file mode 100644
index 0000000..d3308b4
--- /dev/null
+++ b/ChangeLog.d/clang-15-bignum-warning.txt
@@ -0,0 +1,3 @@
+Bugfix
+   * Silence a warning about an unused local variable in bignum.c on
+     some architectures. Fixes #7166.
diff --git a/ChangeLog.d/empty-retval-description.txt b/ChangeLog.d/empty-retval-description.txt
new file mode 100644
index 0000000..491adf5
--- /dev/null
+++ b/ChangeLog.d/empty-retval-description.txt
@@ -0,0 +1,3 @@
+Bugfix
+   * Silence warnings from clang -Wdocumentation about empty \retval
+     descriptions, which started appearing with Clang 15. Fixes #6960.
diff --git a/ChangeLog.d/mpi-window-perf b/ChangeLog.d/mpi-window-perf
new file mode 100644
index 0000000..0f75d6a
--- /dev/null
+++ b/ChangeLog.d/mpi-window-perf
@@ -0,0 +1,7 @@
+Changes
+   * Changed the default MBEDTLS_ECP_WINDOW_SIZE from 6 to 2.
+     As tested in issue 6790, the correlation between this define and
+     RSA decryption performance has changed lately due to security fixes.
+     To fix the performance degradation when using default values the
+     window was reduced from 6 to 2, a value that gives the best or close
+     to best results when tested on Cortex-M4 and Intel i7.
diff --git a/docs/getting_started.md b/docs/getting_started.md
deleted file mode 100644
index 507afa1..0000000
--- a/docs/getting_started.md
+++ /dev/null
@@ -1,962 +0,0 @@
-## Getting started with Mbed TLS
-
-### What is Mbed TLS?
-
-Mbed TLS is an open source cryptographic library that supports a wide range of
-cryptographic operations, including:
-* Key management
-* Hashing
-* Symmetric cryptography
-* Asymmetric cryptography
-* Message authentication (MAC)
-* Key generation and derivation
-* Authenticated encryption with associated data (AEAD)
-
-Mbed TLS provides a reference implementation of the cryptography interface of
-the Arm Platform Security Architecture (PSA). It is written in portable C.
-
-Mbed TLS is distributed under the Apache License, version 2.0.
-
-#### Platform Security Architecture (PSA)
-
-Arm's Platform Security Architecture (PSA) is a holistic set of threat models,
-security analyses, hardware and firmware architecture specifications, and an
-open source firmware reference implementation. PSA provides a recipe, based on
-industry best practice, that enables you to design security into both hardware
-and firmware consistently. Part of the API provided by PSA is the cryptography
-interface, which provides access to a set of primitives.
-
-### Using Mbed TLS
-
-* [Getting the Mbed TLS library](#getting-the-mbed-tls-library)
-* [Building the Mbed TLS library](#building-the-mbed-tls-library)
-* [Using the PSA Crypto API](#using-the-psa-crypto-api)
-* [Importing a key](#importing-a-key)
-* [Signing a message using RSA](#signing-a-message-using-RSA)
-* [Encrypting or decrypting using symmetric ciphers](#encrypting-or-decrypting-using-symmetric-ciphers)
-* [Hashing a message](#hashing-a-message)
-* [Deriving a new key from an existing key](#deriving-a-new-key-from-an-existing-key)
-* [Generating a random value](#generating-a-random-value)
-* [Authenticating and encrypting or decrypting a message](#authenticating-and-encrypting-or-decrypting-a-message)
-* [Generating and exporting keys](#generating-and-exporting-keys)
-* [More about the PSA Crypto API](#more-about-the-psa-crypto-api)
-
-### Getting the Mbed TLS library
-
-Mbed TLS releases are available in the [public GitHub repository](https://github.com/Mbed-TLS/mbedtls).
-
-### Building the Mbed TLS library
-
-**Prerequisites to building the library with the provided makefiles:**
-* GNU Make.
-* A C toolchain (compiler, linker, archiver) that supports C99.
-* Python 3.6 to generate the test code.
-* Perl to run the tests.
-
-If you have a C compiler such as GCC or Clang, just run `make` in the top-level
-directory to build the library, a set of unit tests and some sample programs.
-
-To select a different compiler, set the `CC` variable to the name or path of the
-compiler and linker (default: `cc`) and set `AR` to a compatible archiver
-(default: `ar`); for example:
-```
-make CC=arm-linux-gnueabi-gcc AR=arm-linux-gnueabi-ar
-```
-The provided makefiles pass options to the compiler that assume a GCC-like
-command line syntax. To use a different compiler, you may need to pass different
-values for `CFLAGS`, `WARNINGS_CFLAGS` and `LDFLAGS`.
-
-To run the unit tests on the host machine, run `make test` from the top-level
-directory. If you are cross-compiling, copy the test executable from the `tests`
-directory to the target machine.
-
-### Using the PSA Crypto API
-
-If using PSA Crypto, you must initialize the library by calling
-`psa_crypto_init()` before any other PSA API.
-
-### Importing a key
-
-To use a key for cryptography operations in PSA, you need to first
-import it. The import operation returns the identifier of the key for use
-with other function calls.
-
-**Prerequisites to importing keys:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-
-This example shows how to import a key:
-```C
-void import_a_key(const uint8_t *key, size_t key_len)
-{
-    psa_status_t status;
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    psa_key_id_t key_id;
-
-    printf("Import an AES key...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Set key attributes */
-    psa_set_key_usage_flags(&attributes, 0);
-    psa_set_key_algorithm(&attributes, 0);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_AES);
-    psa_set_key_bits(&attributes, 128);
-
-    /* Import the key */
-    status = psa_import_key(&attributes, key, key_len, &key_id);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to import key\n");
-        return;
-    }
-    printf("Imported a key\n");
-
-    /* Free the attributes */
-    psa_reset_key_attributes(&attributes);
-
-    /* Destroy the key */
-    psa_destroy_key(key_id);
-
-    mbedtls_psa_crypto_free();
-}
-```
-
-### Signing a message using RSA
-
-The PSA Crypto API supports encrypting, decrypting, signing and verifying
-messages using public key signature algorithms, such as RSA or ECDSA.
-
-**Prerequisites to performing asymmetric signature operations:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-* Have a valid key with appropriate attributes set:
-    * Usage flag `PSA_KEY_USAGE_SIGN_HASH` to allow signing.
-    * Usage flag `PSA_KEY_USAGE_VERIFY_HASH` to allow signature verification.
-    * Algorithm set to the desired signature algorithm.
-
-This example shows how to sign a hash that has already been calculated:
-```C
-void sign_a_message_using_rsa(const uint8_t *key, size_t key_len)
-{
-    psa_status_t status;
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    uint8_t hash[32] = {0x50, 0xd8, 0x58, 0xe0, 0x98, 0x5e, 0xcc, 0x7f,
-                        0x60, 0x41, 0x8a, 0xaf, 0x0c, 0xc5, 0xab, 0x58,
-                        0x7f, 0x42, 0xc2, 0x57, 0x0a, 0x88, 0x40, 0x95,
-                        0xa9, 0xe8, 0xcc, 0xac, 0xd0, 0xf6, 0x54, 0x5c};
-    uint8_t signature[PSA_SIGNATURE_MAX_SIZE] = {0};
-    size_t signature_length;
-    psa_key_id_t key_id;
-
-    printf("Sign a message...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Set key attributes */
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_SIGN_HASH);
-    psa_set_key_algorithm(&attributes, PSA_ALG_RSA_PKCS1V15_SIGN_RAW);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_RSA_KEY_PAIR);
-    psa_set_key_bits(&attributes, 1024);
-
-    /* Import the key */
-    status = psa_import_key(&attributes, key, key_len, &key_id);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to import key\n");
-        return;
-    }
-
-    /* Sign message using the key */
-    status = psa_sign_hash(key_id, PSA_ALG_RSA_PKCS1V15_SIGN_RAW,
-                           hash, sizeof(hash),
-                           signature, sizeof(signature),
-                           &signature_length);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to sign\n");
-        return;
-    }
-
-    printf("Signed a message\n");
-
-    /* Free the attributes */
-    psa_reset_key_attributes(&attributes);
-
-    /* Destroy the key */
-    psa_destroy_key(key_id);
-
-    mbedtls_psa_crypto_free();
-}
-```
-
-### Using symmetric ciphers
-
-The PSA Crypto API supports encrypting and decrypting messages using various
-symmetric cipher algorithms (both block and stream ciphers).
-
-**Prerequisites to working with the symmetric cipher API:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-* Have a symmetric key. This key's usage flags must include
-  `PSA_KEY_USAGE_ENCRYPT` to allow encryption or `PSA_KEY_USAGE_DECRYPT` to
-  allow decryption.
-
-**To encrypt a message with a symmetric cipher:**
-1. Allocate an operation (`psa_cipher_operation_t`) structure to pass to the
-   cipher functions.
-1. Initialize the operation structure to zero or to `PSA_CIPHER_OPERATION_INIT`.
-1. Call `psa_cipher_encrypt_setup()` to specify the algorithm and the key to be
-   used.
-1. Call either `psa_cipher_generate_iv()` or `psa_cipher_set_iv()` to generate
-   or set the initialization vector (IV). We recommend calling
-   `psa_cipher_generate_iv()`, unless you require a specific IV value.
-1. Call `psa_cipher_update()` with the message to encrypt. You may call this
-   function multiple times, passing successive fragments of the message on
-   successive calls.
-1. Call `psa_cipher_finish()` to end the operation and output the encrypted
-   message.
-
-This example shows how to encrypt data using an AES (Advanced Encryption
-Standard) key in CBC (Cipher Block Chaining) mode with no padding (assuming all
-prerequisites have been fulfilled):
-```c
-void encrypt_with_symmetric_ciphers(const uint8_t *key, size_t key_len)
-{
-    enum {
-        block_size = PSA_BLOCK_CIPHER_BLOCK_LENGTH(PSA_KEY_TYPE_AES),
-    };
-    psa_status_t status;
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    psa_algorithm_t alg = PSA_ALG_CBC_NO_PADDING;
-    uint8_t plaintext[block_size] = SOME_PLAINTEXT;
-    uint8_t iv[block_size];
-    size_t iv_len;
-    uint8_t output[block_size];
-    size_t output_len;
-    psa_key_id_t key_id;
-    psa_cipher_operation_t operation = PSA_CIPHER_OPERATION_INIT;
-
-    printf("Encrypt with cipher...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS)
-    {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Import a key */
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_ENCRYPT);
-    psa_set_key_algorithm(&attributes, alg);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_AES);
-    psa_set_key_bits(&attributes, 128);
-    status = psa_import_key(&attributes, key, key_len, &key_id);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to import a key\n");
-        return;
-    }
-    psa_reset_key_attributes(&attributes);
-
-    /* Encrypt the plaintext */
-    status = psa_cipher_encrypt_setup(&operation, key_id, alg);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to begin cipher operation\n");
-        return;
-    }
-    status = psa_cipher_generate_iv(&operation, iv, sizeof(iv), &iv_len);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to generate IV\n");
-        return;
-    }
-    status = psa_cipher_update(&operation, plaintext, sizeof(plaintext),
-                               output, sizeof(output), &output_len);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to update cipher operation\n");
-        return;
-    }
-    status = psa_cipher_finish(&operation, output + output_len,
-                               sizeof(output) - output_len, &output_len);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to finish cipher operation\n");
-        return;
-    }
-    printf("Encrypted plaintext\n");
-
-    /* Clean up cipher operation context */
-    psa_cipher_abort(&operation);
-
-    /* Destroy the key */
-    psa_destroy_key(key_id);
-
-    mbedtls_psa_crypto_free();
-}
-```
-
-**To decrypt a message with a symmetric cipher:**
-1. Allocate an operation (`psa_cipher_operation_t`) structure to pass to the
-   cipher functions.
-1. Initialize the operation structure to zero or to `PSA_CIPHER_OPERATION_INIT`.
-1. Call `psa_cipher_decrypt_setup()` to specify the algorithm and the key to be
-   used.
-1. Call `psa_cipher_set_iv()` with the IV for the decryption.
-1. Call `psa_cipher_update()` with the message to encrypt. You may call this
-   function multiple times, passing successive fragments of the message on
-   successive calls.
-1. Call `psa_cipher_finish()` to end the operation and output the decrypted
-   message.
-
-This example shows how to decrypt encrypted data using an AES key in CBC mode
-with no padding (assuming all prerequisites have been fulfilled):
-```c
-void decrypt_with_symmetric_ciphers(const uint8_t *key, size_t key_len)
-{
-    enum {
-        block_size = PSA_BLOCK_CIPHER_BLOCK_LENGTH(PSA_KEY_TYPE_AES),
-    };
-    psa_status_t status;
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    psa_algorithm_t alg = PSA_ALG_CBC_NO_PADDING;
-    psa_cipher_operation_t operation = PSA_CIPHER_OPERATION_INIT;
-    uint8_t ciphertext[block_size] = SOME_CIPHERTEXT;
-    uint8_t iv[block_size] = ENCRYPTED_WITH_IV;
-    uint8_t output[block_size];
-    size_t output_len;
-    psa_key_id_t key_id;
-
-    printf("Decrypt with cipher...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS)
-    {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Import a key */
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_DECRYPT);
-    psa_set_key_algorithm(&attributes, alg);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_AES);
-    psa_set_key_bits(&attributes, 128);
-    status = psa_import_key(&attributes, key, key_len, &key_id);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to import a key\n");
-        return;
-    }
-    psa_reset_key_attributes(&attributes);
-
-    /* Decrypt the ciphertext */
-    status = psa_cipher_decrypt_setup(&operation, key_id, alg);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to begin cipher operation\n");
-        return;
-    }
-    status = psa_cipher_set_iv(&operation, iv, sizeof(iv));
-    if (status != PSA_SUCCESS) {
-        printf("Failed to set IV\n");
-        return;
-    }
-    status = psa_cipher_update(&operation, ciphertext, sizeof(ciphertext),
-                               output, sizeof(output), &output_len);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to update cipher operation\n");
-        return;
-    }
-    status = psa_cipher_finish(&operation, output + output_len,
-                               sizeof(output) - output_len, &output_len);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to finish cipher operation\n");
-        return;
-    }
-    printf("Decrypted ciphertext\n");
-
-    /* Clean up cipher operation context */
-    psa_cipher_abort(&operation);
-
-    /* Destroy the key */
-    psa_destroy_key(key_id);
-
-    mbedtls_psa_crypto_free();
-}
-```
-
-#### Handling cipher operation contexts
-
-After you've initialized the operation structure with a successful call to
-`psa_cipher_encrypt_setup()` or `psa_cipher_decrypt_setup()`, you can terminate
-the operation at any time by calling `psa_cipher_abort()`.
-
-The call to `psa_cipher_abort()` frees any resources associated with the
-operation, except for the operation structure itself.
-
-The PSA Crypto API implicitly calls `psa_cipher_abort()` when:
-* A call to `psa_cipher_generate_iv()`, `psa_cipher_set_iv()` or
-  `psa_cipher_update()` fails (returning any status other than `PSA_SUCCESS`).
-* A call to `psa_cipher_finish()` succeeds or fails.
-
-After an implicit or explicit call to `psa_cipher_abort()`, the operation
-structure is invalidated; in other words, you cannot reuse the operation
-structure for the same operation. You can, however, reuse the operation
-structure for a different operation by calling either
-`psa_cipher_encrypt_setup()` or `psa_cipher_decrypt_setup()` again.
-
-You must call `psa_cipher_abort()` at some point for any operation that is
-initialized successfully (by a successful call to `psa_cipher_encrypt_setup()`
-or `psa_cipher_decrypt_setup()`).
-
-Making multiple sequential calls to `psa_cipher_abort()` on an operation that
-is terminated (either implicitly or explicitly) is safe and has no effect.
-
-### Hashing a message
-
-The PSA Crypto API lets you compute and verify hashes using various hashing
-algorithms.
-
-**Prerequisites to working with the hash APIs:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-
-**To calculate a hash:**
-1. Allocate an operation structure (`psa_hash_operation_t`) to pass to the hash
-   functions.
-1. Initialize the operation structure to zero or to `PSA_HASH_OPERATION_INIT`.
-1. Call `psa_hash_setup()` to specify the hash algorithm.
-1. Call `psa_hash_update()` with the message to encrypt. You may call this
-   function multiple times, passing successive fragments of the message on
-   successive calls.
-1. Call `psa_hash_finish()` to calculate the hash, or `psa_hash_verify()` to
-   compare the computed hash with an expected hash value.
-
-This example shows how to calculate the SHA-256 hash of a message:
-```c
-    psa_status_t status;
-    psa_algorithm_t alg = PSA_ALG_SHA_256;
-    psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
-    unsigned char input[] = { 'a', 'b', 'c' };
-    unsigned char actual_hash[PSA_HASH_MAX_SIZE];
-    size_t actual_hash_len;
-
-    printf("Hash a message...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Compute hash of message  */
-    status = psa_hash_setup(&operation, alg);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to begin hash operation\n");
-        return;
-    }
-    status = psa_hash_update(&operation, input, sizeof(input));
-    if (status != PSA_SUCCESS) {
-        printf("Failed to update hash operation\n");
-        return;
-    }
-    status = psa_hash_finish(&operation, actual_hash, sizeof(actual_hash),
-                             &actual_hash_len);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to finish hash operation\n");
-        return;
-    }
-
-    printf("Hashed a message\n");
-
-    /* Clean up hash operation context */
-    psa_hash_abort(&operation);
-
-    mbedtls_psa_crypto_free();
-```
-
-This example shows how to verify the SHA-256 hash of a message:
-```c
-    psa_status_t status;
-    psa_algorithm_t alg = PSA_ALG_SHA_256;
-    psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
-    unsigned char input[] = { 'a', 'b', 'c' };
-    unsigned char expected_hash[] = {
-        0xba, 0x78, 0x16, 0xbf, 0x8f, 0x01, 0xcf, 0xea, 0x41, 0x41, 0x40, 0xde,
-        0x5d, 0xae, 0x22, 0x23, 0xb0, 0x03, 0x61, 0xa3, 0x96, 0x17, 0x7a, 0x9c,
-        0xb4, 0x10, 0xff, 0x61, 0xf2, 0x00, 0x15, 0xad
-    };
-    size_t expected_hash_len = PSA_HASH_LENGTH(alg);
-
-    printf("Verify a hash...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Verify message hash */
-    status = psa_hash_setup(&operation, alg);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to begin hash operation\n");
-        return;
-    }
-    status = psa_hash_update(&operation, input, sizeof(input));
-    if (status != PSA_SUCCESS) {
-        printf("Failed to update hash operation\n");
-        return;
-    }
-    status = psa_hash_verify(&operation, expected_hash, expected_hash_len);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to verify hash\n");
-        return;
-    }
-
-    printf("Verified a hash\n");
-
-    /* Clean up hash operation context */
-    psa_hash_abort(&operation);
-
-    mbedtls_psa_crypto_free();
-```
-
-The API provides the macro `PSA_HASH_LENGTH`, which returns the expected hash
-length (in bytes) for the specified algorithm.
-
-#### Handling hash operation contexts
-
-After a successful call to `psa_hash_setup()`, you can terminate the operation
-at any time by calling `psa_hash_abort()`. The call to `psa_hash_abort()` frees
-any resources associated with the operation, except for the operation structure
-itself.
-
-The PSA Crypto API implicitly calls `psa_hash_abort()` when:
-1. A call to `psa_hash_update()` fails (returning any status other than
-   `PSA_SUCCESS`).
-1. A call to `psa_hash_finish()` succeeds or fails.
-1. A call to `psa_hash_verify()` succeeds or fails.
-
-After an implicit or explicit call to `psa_hash_abort()`, the operation
-structure is invalidated; in other words, you cannot reuse the operation
-structure for the same operation. You can, however, reuse the operation
-structure for a different operation by calling `psa_hash_setup()` again.
-
-You must call `psa_hash_abort()` at some point for any operation that is
-initialized successfully (by a successful call to `psa_hash_setup()`) .
-
-Making multiple sequential calls to `psa_hash_abort()` on an operation that has
-already been terminated (either implicitly or explicitly) is safe and has no
-effect.
-
-### Generating a random value
-
-The PSA Crypto API can generate random data.
-
-**Prerequisites to generating random data:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-
-<span class="notes">**Note:** To generate a random key, use `psa_generate_key()`
-instead of `psa_generate_random()`.</span>
-
-This example shows how to generate ten bytes of random data by calling
-`psa_generate_random()`:
-```C
-    psa_status_t status;
-    uint8_t random[10] = { 0 };
-
-    printf("Generate random...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    status = psa_generate_random(random, sizeof(random));
-    if (status != PSA_SUCCESS) {
-        printf("Failed to generate a random value\n");
-        return;
-    }
-
-    printf("Generated random data\n");
-
-    /* Clean up */
-    mbedtls_psa_crypto_free();
-```
-
-### Deriving a new key from an existing key
-
-The PSA Crypto API provides a key derivation API that lets you derive new keys
-from existing ones. The key derivation API has functions to take inputs,
-including other keys and data, and functions to generate outputs, such as
-new keys or other data.
-
-You must first initialize and set up a key derivation context,
-provided with a key and, optionally, other data. Then, use the key derivation
-context to either read derived data to a buffer or send derived data directly
-to a key slot.
-
-See the documentation for the particular algorithm (such as HKDF or the
-TLS 1.2 PRF) for information about which inputs to pass when, and when you can
-obtain which outputs.
-
-**Prerequisites to working with the key derivation APIs:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-* Use a key with the appropriate attributes set:
-    * Usage flags set for key derivation (`PSA_KEY_USAGE_DERIVE`)
-    * Key type set to `PSA_KEY_TYPE_DERIVE`.
-    * Algorithm set to a key derivation algorithm
-      (for example, `PSA_ALG_HKDF(PSA_ALG_SHA_256)`).
-
-**To derive a new AES-CTR 128-bit encryption key into a given key slot using HKDF
-with a given key, salt and info:**
-
-1. Set up the key derivation context using the `psa_key_derivation_setup()`
-function, specifying the derivation algorithm `PSA_ALG_HKDF(PSA_ALG_SHA_256)`.
-1. Provide an optional salt with `psa_key_derivation_input_bytes()`.
-1. Provide info with `psa_key_derivation_input_bytes()`.
-1. Provide a secret with `psa_key_derivation_input_key()`, referencing a key
-   that can be used for key derivation.
-1. Set the key attributes desired for the new derived key. We'll set
-   the `PSA_KEY_USAGE_ENCRYPT` usage flag and the `PSA_ALG_CTR` algorithm for
-   this example.
-1. Derive the key by calling `psa_key_derivation_output_key()`.
-1. Clean up the key derivation context.
-
-At this point, the derived key slot holds a new 128-bit AES-CTR encryption key
-derived from the key, salt and info provided:
-```C
-    psa_status_t status;
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    static const unsigned char key[] = {
-        0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
-        0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
-        0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
-        0x0b };
-    static const unsigned char salt[] = {
-        0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
-        0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c };
-    static const unsigned char info[] = {
-        0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6,
-        0xf7, 0xf8, 0xf9 };
-    psa_algorithm_t alg = PSA_ALG_HKDF(PSA_ALG_SHA_256);
-    psa_key_derivation_operation_t operation =
-        PSA_KEY_DERIVATION_OPERATION_INIT;
-    size_t derived_bits = 128;
-    size_t capacity = PSA_BITS_TO_BYTES(derived_bits);
-    psa_key_id_t base_key;
-    psa_key_id_t derived_key;
-
-    printf("Derive a key (HKDF)...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Import a key for use in key derivation. If such a key has already been
-     * generated or imported, you can skip this part. */
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_DERIVE);
-    psa_set_key_algorithm(&attributes, alg);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_DERIVE);
-    status = psa_import_key(&attributes, key, sizeof(key), &base_key);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to import a key\n");
-        return;
-    }
-    psa_reset_key_attributes(&attributes);
-
-    /* Derive a key */
-    status = psa_key_derivation_setup(&operation, alg);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to begin key derivation\n");
-        return;
-    }
-    status = psa_key_derivation_set_capacity(&operation, capacity);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to set capacity\n");
-        return;
-    }
-    status = psa_key_derivation_input_bytes(&operation,
-                                            PSA_KEY_DERIVATION_INPUT_SALT,
-                                            salt, sizeof(salt));
-    if (status != PSA_SUCCESS) {
-        printf("Failed to input salt (extract)\n");
-        return;
-    }
-    status = psa_key_derivation_input_key(&operation,
-                                          PSA_KEY_DERIVATION_INPUT_SECRET,
-                                          base_key);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to input key (extract)\n");
-        return;
-    }
-    status = psa_key_derivation_input_bytes(&operation,
-                                            PSA_KEY_DERIVATION_INPUT_INFO,
-                                            info, sizeof(info));
-    if (status != PSA_SUCCESS) {
-        printf("Failed to input info (expand)\n");
-        return;
-    }
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_ENCRYPT);
-    psa_set_key_algorithm(&attributes, PSA_ALG_CTR);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_AES);
-    psa_set_key_bits(&attributes, 128);
-    status = psa_key_derivation_output_key(&attributes, &operation,
-                                           &derived_key);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to derive key\n");
-        return;
-    }
-    psa_reset_key_attributes(&attributes);
-
-    printf("Derived key\n");
-
-    /* Clean up key derivation operation */
-    psa_key_derivation_abort(&operation);
-
-    /* Destroy the keys */
-    psa_destroy_key(derived_key);
-    psa_destroy_key(base_key);
-
-    mbedtls_psa_crypto_free();
-```
-
-### Authenticating and encrypting or decrypting a message
-
-The PSA Crypto API provides a simple way to authenticate and encrypt with
-associated data (AEAD), supporting the `PSA_ALG_CCM` algorithm.
-
-**Prerequisites to working with the AEAD cipher APIs:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-* The key attributes for the key used for derivation must have the
-  `PSA_KEY_USAGE_ENCRYPT` or `PSA_KEY_USAGE_DECRYPT` usage flags.
-
-This example shows how to authenticate and encrypt a message:
-```C
-    psa_status_t status;
-    static const uint8_t key[] = {
-        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
-        0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF };
-    static const uint8_t nonce[] = {
-        0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-        0x08, 0x09, 0x0A, 0x0B };
-    static const uint8_t additional_data[] = {
-        0xEC, 0x46, 0xBB, 0x63, 0xB0, 0x25,
-        0x20, 0xC3, 0x3C, 0x49, 0xFD, 0x70 };
-    static const uint8_t input_data[] = {
-        0xB9, 0x6B, 0x49, 0xE2, 0x1D, 0x62, 0x17, 0x41,
-        0x63, 0x28, 0x75, 0xDB, 0x7F, 0x6C, 0x92, 0x43,
-        0xD2, 0xD7, 0xC2 };
-    uint8_t *output_data = NULL;
-    size_t output_size = 0;
-    size_t output_length = 0;
-    size_t tag_length = 16;
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    psa_key_id_t key_id;
-
-    printf("Authenticate encrypt...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    output_size = sizeof(input_data) + tag_length;
-    output_data = (uint8_t *)malloc(output_size);
-    if (!output_data) {
-        printf("Out of memory\n");
-        return;
-    }
-
-    /* Import a key */
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_ENCRYPT);
-    psa_set_key_algorithm(&attributes, PSA_ALG_CCM);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_AES);
-    psa_set_key_bits(&attributes, 128);
-    status = psa_import_key(&attributes, key, sizeof(key), &key_id);
-    psa_reset_key_attributes(&attributes);
-
-    /* Authenticate and encrypt */
-    status = psa_aead_encrypt(key_id, PSA_ALG_CCM,
-                              nonce, sizeof(nonce),
-                              additional_data, sizeof(additional_data),
-                              input_data, sizeof(input_data),
-                              output_data, output_size,
-                              &output_length);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to authenticate and encrypt\n");
-        return;
-    }
-
-    printf("Authenticated and encrypted\n");
-
-    /* Clean up */
-    free(output_data);
-
-    /* Destroy the key */
-    psa_destroy_key(key_id);
-
-    mbedtls_psa_crypto_free();
-```
-
-This example shows how to authenticate and decrypt a message:
-
-```C
-    psa_status_t status;
-    static const uint8_t key_data[] = {
-        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
-        0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF };
-    static const uint8_t nonce[] = {
-        0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-        0x08, 0x09, 0x0A, 0x0B };
-    static const uint8_t additional_data[] = {
-        0xEC, 0x46, 0xBB, 0x63, 0xB0, 0x25,
-        0x20, 0xC3, 0x3C, 0x49, 0xFD, 0x70 };
-    static const uint8_t input_data[] = {
-        0x20, 0x30, 0xE0, 0x36, 0xED, 0x09, 0xA0, 0x45, 0xAF, 0x3C, 0xBA, 0xEE,
-        0x0F, 0xC8, 0x48, 0xAF, 0xCD, 0x89, 0x54, 0xF4, 0xF6, 0x3F, 0x28, 0x9A,
-        0xA1, 0xDD, 0xB2, 0xB8, 0x09, 0xCD, 0x7C, 0xE1, 0x46, 0xE9, 0x98 };
-    uint8_t *output_data = NULL;
-    size_t output_size = 0;
-    size_t output_length = 0;
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    psa_key_id_t key_id;
-
-    printf("Authenticate decrypt...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    output_size = sizeof(input_data);
-    output_data = (uint8_t *)malloc(output_size);
-    if (!output_data) {
-        printf("Out of memory\n");
-        return;
-    }
-
-    /* Import a key */
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_DECRYPT);
-    psa_set_key_algorithm(&attributes, PSA_ALG_CCM);
-    psa_set_key_type(&attributes, PSA_KEY_TYPE_AES);
-    psa_set_key_bits(&attributes, 128);
-    status = psa_import_key(&attributes, key_data, sizeof(key_data), &key_id);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to import a key\n");
-        return;
-    }
-    psa_reset_key_attributes(&attributes);
-
-    /* Authenticate and decrypt */
-    status = psa_aead_decrypt(key_id, PSA_ALG_CCM,
-                              nonce, sizeof(nonce),
-                              additional_data, sizeof(additional_data),
-                              input_data, sizeof(input_data),
-                              output_data, output_size,
-                              &output_length);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to authenticate and decrypt %ld\n", status);
-        return;
-    }
-
-    printf("Authenticated and decrypted\n");
-
-    /* Clean up */
-    free(output_data);
-
-    /* Destroy the key */
-    psa_destroy_key(key_id);
-
-    mbedtls_psa_crypto_free();
-```
-
-### Generating and exporting keys
-
-The PSA Crypto API provides a simple way to generate a key or key pair.
-
-**Prerequisites to using key generation and export APIs:**
-* Initialize the library with a successful call to `psa_crypto_init()`.
-
-**To generate an ECDSA key:**
-1. Set the desired key attributes for key generation by calling
-   `psa_set_key_algorithm()` with the chosen ECDSA algorithm (such as
-   `PSA_ALG_DETERMINISTIC_ECDSA(PSA_ALG_SHA_256)`). You only want to export the
-   public key, not the key pair (or private key); therefore, do not
-   set `PSA_KEY_USAGE_EXPORT`.
-1. Generate a key by calling `psa_generate_key()`.
-1. Export the generated public key by calling `psa_export_public_key()`:
-```C
-    enum {
-        key_bits = 256,
-    };
-    psa_status_t status;
-    size_t exported_length = 0;
-    static uint8_t exported[PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(key_bits)];
-    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
-    psa_key_id_t key_id;
-
-    printf("Generate a key pair...\t");
-    fflush(stdout);
-
-    /* Initialize PSA Crypto */
-    status = psa_crypto_init();
-    if (status != PSA_SUCCESS) {
-        printf("Failed to initialize PSA Crypto\n");
-        return;
-    }
-
-    /* Generate a key */
-    psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_SIGN_HASH);
-    psa_set_key_algorithm(&attributes,
-                          PSA_ALG_DETERMINISTIC_ECDSA(PSA_ALG_SHA_256));
-    psa_set_key_type(&attributes,
-                     PSA_KEY_TYPE_ECC_KEY_PAIR(PSA_ECC_FAMILY_SECP_R1));
-    psa_set_key_bits(&attributes, key_bits);
-    status = psa_generate_key(&attributes, &key_id);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to generate key\n");
-        return;
-    }
-    psa_reset_key_attributes(&attributes);
-
-    status = psa_export_public_key(key_id, exported, sizeof(exported),
-                                   &exported_length);
-    if (status != PSA_SUCCESS) {
-        printf("Failed to export public key %ld\n", status);
-        return;
-    }
-
-    printf("Exported a public key\n");
-
-    /* Destroy the key */
-    psa_destroy_key(key_id);
-
-    mbedtls_psa_crypto_free();
-```
-
-### More about the PSA Crypto API
-
-For more information about the PSA Crypto API, please see the
-[PSA Cryptography API Specification](https://arm-software.github.io/psa-api/crypto/).
diff --git a/doxygen/mbedtls.doxyfile b/doxygen/mbedtls.doxyfile
index 7c4f31c..1f1a9cd 100644
--- a/doxygen/mbedtls.doxyfile
+++ b/doxygen/mbedtls.doxyfile
@@ -25,3 +25,18 @@
 DOT_GRAPH_MAX_NODES    = 200
 MAX_DOT_GRAPH_DEPTH    = 1000
 DOT_TRANSPARENT        = YES
+
+# We mostly use \retval declarations to document which error codes a function
+# can return. The reader can follow the hyperlink to the definition of the
+# constant to get the generic documentation of that error code. If we don't
+# have anything to say about the specific error code for the specific
+# function, we can leave the description part of the \retval command blank.
+# This is perfectly valid as far as Doxygen is concerned. However, with
+# Clang >=15, the -Wdocumentation option emits a warning for empty
+# descriptions.
+#   https://github.com/Mbed-TLS/mbedtls/issues/6960
+#   https://github.com/llvm/llvm-project/issues/60315
+# As a workaround, you can write something like
+#     \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+# This avoids writing redundant text and keeps Clang happy.
+ALIASES += emptydescription=""
diff --git a/include/mbedtls/bignum.h b/include/mbedtls/bignum.h
index d706a2c..788ea21 100644
--- a/include/mbedtls/bignum.h
+++ b/include/mbedtls/bignum.h
@@ -66,7 +66,7 @@
 
 #if !defined(MBEDTLS_MPI_WINDOW_SIZE)
 /*
- * Maximum window size used for modular exponentiation. Default: 6
+ * Maximum window size used for modular exponentiation. Default: 2
  * Minimum value: 1. Maximum value: 6.
  *
  * Result is an array of ( 2 ** MBEDTLS_MPI_WINDOW_SIZE ) MPIs used
@@ -74,7 +74,7 @@
  *
  * Reduction in size, reduces speed.
  */
-#define MBEDTLS_MPI_WINDOW_SIZE                           6        /**< Maximum window size used. */
+#define MBEDTLS_MPI_WINDOW_SIZE                           2        /**< Maximum window size used. */
 #endif /* !MBEDTLS_MPI_WINDOW_SIZE */
 
 #if !defined(MBEDTLS_MPI_MAX_SIZE)
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index 5dcbdd1..acdb7ac 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -871,7 +871,7 @@
  * - Changes the behaviour of TLS 1.2 clients (not servers) when using the
  *   ECDHE-ECDSA key exchange (not other key exchanges) to make all ECC
  *   computations restartable:
- *   - ECDH operations from the key exchange, only for Short Weierstass
+ *   - ECDH operations from the key exchange, only for Short Weierstrass
  *     curves;
  *   - verification of the server's key exchange signature;
  *   - verification of the server's certificate chain;
@@ -3749,7 +3749,7 @@
  * comment in the specific module. */
 
 /* MPI / BIGNUM options */
-//#define MBEDTLS_MPI_WINDOW_SIZE            6 /**< Maximum window size used. */
+//#define MBEDTLS_MPI_WINDOW_SIZE            2 /**< Maximum window size used. */
 //#define MBEDTLS_MPI_MAX_SIZE            1024 /**< Maximum number of bytes for usable MPIs. */
 
 /* CTR_DRBG options */
diff --git a/include/mbedtls/pk.h b/include/mbedtls/pk.h
index a226e71..ec83551 100644
--- a/include/mbedtls/pk.h
+++ b/include/mbedtls/pk.h
@@ -402,6 +402,11 @@
  *                  Use \c mbedtls_pk_verify_ext( MBEDTLS_PK_RSASSA_PSS, ... )
  *                  to verify RSASSA_PSS signatures.
  *
+ * \note            If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                  subsystem must have been initialized by calling
+ *                  psa_crypto_init() before calling this function,
+ *                  if the key might be an ECC (ECDSA) key.
+ *
  * \note            If hash_len is 0, then the length associated with md_alg
  *                  is used instead, or an error returned if it is invalid.
  *
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index 7836ece..26e4ec4 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -1544,6 +1544,10 @@
  *                 Calling mbedtls_ssl_setup again is not supported, even
  *                 if no session is active.
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param ssl      SSL context
  * \param conf     SSL configuration to use
  *
@@ -3980,6 +3984,10 @@
  *                 in which case the datagram of the underlying transport that is
  *                 currently being processed might or might not contain further
  *                 DTLS records.
+ *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
  */
 int mbedtls_ssl_handshake(mbedtls_ssl_context *ssl);
 
diff --git a/include/mbedtls/x509_crl.h b/include/mbedtls/x509_crl.h
index 895eca0..1405021 100644
--- a/include/mbedtls/x509_crl.h
+++ b/include/mbedtls/x509_crl.h
@@ -95,6 +95,10 @@
 /**
  * \brief          Parse a DER-encoded CRL and append it to the chained list
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param chain    points to the start of the chain
  * \param buf      buffer holding the CRL data in DER format
  * \param buflen   size of the buffer
@@ -109,6 +113,10 @@
  *
  * \note           Multiple CRLs are accepted only if using PEM format
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param chain    points to the start of the chain
  * \param buf      buffer holding the CRL data in PEM or DER format
  * \param buflen   size of the buffer
@@ -124,6 +132,10 @@
  *
  * \note           Multiple CRLs are accepted only if using PEM format
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param chain    points to the start of the chain
  * \param path     filename to read the CRLs from (in PEM or DER encoding)
  *
diff --git a/include/mbedtls/x509_crt.h b/include/mbedtls/x509_crt.h
index 235e00c..466611f 100644
--- a/include/mbedtls/x509_crt.h
+++ b/include/mbedtls/x509_crt.h
@@ -283,6 +283,10 @@
  * \brief          Parse a single DER formatted certificate and add it
  *                 to the end of the provided chained list.
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param chain    The pointer to the start of the CRT chain to attach to.
  *                 When parsing the first CRT in a chain, this should point
  *                 to an instance of ::mbedtls_x509_crt initialized through
@@ -344,6 +348,10 @@
  * \brief            Parse a single DER formatted certificate and add it
  *                   to the end of the provided chained list.
  *
+ * \note             If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                   subsystem must have been initialized by calling
+ *                   psa_crypto_init() before calling this function.
+ *
  * \param chain      The pointer to the start of the CRT chain to attach to.
  *                   When parsing the first CRT in a chain, this should point
  *                   to an instance of ::mbedtls_x509_crt initialized through
@@ -394,6 +402,10 @@
  *                 temporary ownership of the CRT buffer until the CRT
  *                 is destroyed.
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param chain    The pointer to the start of the CRT chain to attach to.
  *                 When parsing the first CRT in a chain, this should point
  *                 to an instance of ::mbedtls_x509_crt initialized through
@@ -434,6 +446,10 @@
  *                 long as the certificates are enclosed in the PEM specific
  *                 '-----{BEGIN/END} CERTIFICATE-----' delimiters.
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param chain    The chain to which to add the parsed certificates.
  * \param buf      The buffer holding the certificate data in PEM or DER format.
  *                 For certificates in PEM encoding, this may be a concatenation
@@ -458,6 +474,10 @@
  *                 of failed certificates it encountered. If none complete
  *                 correctly, the first error is returned.
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param chain    points to the start of the chain
  * \param path     filename to read the certificates from
  *
diff --git a/include/mbedtls/x509_csr.h b/include/mbedtls/x509_csr.h
index fa7ef04..5975584 100644
--- a/include/mbedtls/x509_csr.h
+++ b/include/mbedtls/x509_csr.h
@@ -82,6 +82,10 @@
  *
  * \note           CSR attributes (if any) are currently silently ignored.
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param csr      CSR context to fill
  * \param buf      buffer holding the CRL data
  * \param buflen   size of the buffer
@@ -96,6 +100,10 @@
  *
  * \note           See notes for \c mbedtls_x509_csr_parse_der()
  *
+ * \note           If #MBEDTLS_USE_PSA_CRYPTO is enabled, the PSA crypto
+ *                 subsystem must have been initialized by calling
+ *                 psa_crypto_init() before calling this function.
+ *
  * \param csr      CSR context to fill
  * \param buf      buffer holding the CRL data
  * \param buflen   size of the buffer
diff --git a/include/psa/crypto.h b/include/psa/crypto.h
index a6875ac..3c1c109 100644
--- a/include/psa/crypto.h
+++ b/include/psa/crypto.h
@@ -88,16 +88,16 @@
  * initialization may have security implications, for example due to improper
  * seeding of the random number generator.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  */
 psa_status_t psa_crypto_init(void);
 
@@ -374,14 +374,14 @@
  *                              On failure, equivalent to a
  *                              freshly-initialized structure.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -492,7 +492,7 @@
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE
  *         \p source_key is invalid.
  * \retval #PSA_ERROR_ALREADY_EXISTS
@@ -508,14 +508,14 @@
  *         The source key does not have the #PSA_KEY_USAGE_COPY usage flag, or
  *         the source key is not exportable and its lifetime does not
  *         allow copying it to the target's lifetime.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -637,14 +637,14 @@
  *         the key data is not correctly formatted, or
  *         the size in \p attributes is nonzero and does not match the size
  *         of the key data.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -724,22 +724,22 @@
  * \param[out] data_length  On success, the number of bytes
  *                          that make up the key data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_EXPORT flag.
- * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p data buffer is too small. You can determine a
  *         sufficient buffer size by calling
  *         #PSA_EXPORT_KEY_OUTPUT_SIZE(\c type, \c bits)
  *         where \c type is the key type
  *         and \c bits is the key size in bits.
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -799,22 +799,22 @@
  * \param[out] data_length  On success, the number of bytes
  *                          that make up the key data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The key is neither a public key nor a key pair.
- * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p data buffer is too small. You can determine a
  *         sufficient buffer size by calling
  *         #PSA_EXPORT_KEY_OUTPUT_SIZE(#PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(\c type), \c bits)
  *         where \c type is the key type
  *         and \c bits is the key size in bits.
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -852,13 +852,13 @@
  *         Success.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a hash algorithm.
- * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p hash_size is too small
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -890,10 +890,10 @@
  *         \p alg is not supported or is not a hash algorithm.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p input_length or \p hash_length do not match the hash size for \p alg
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -989,10 +989,10 @@
  *         \p alg is not a supported hash algorithm.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p alg is not a hash algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -1015,10 +1015,10 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -1061,10 +1061,10 @@
  *         The size of the \p hash buffer is too small. You can determine a
  *         sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg)
  *         where \c alg is the hash algorithm that is calculated.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -1102,10 +1102,10 @@
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The hash of the message was calculated successfully, but it
  *         differs from the expected hash.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -1132,10 +1132,10 @@
  *
  * \param[in,out] operation     Initialized hash operation.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -1158,11 +1158,11 @@
  * \param[in,out] target_operation  The operation object to set up.
  *                                  It must be initialized but not active.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The \p source_operation state is not valid (it must be active), or
  *         the \p target_operation state is not valid (it must be inactive), or
@@ -1202,18 +1202,18 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a MAC algorithm.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p mac_size is too small
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
@@ -1245,16 +1245,16 @@
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The MAC of the message was calculated successfully, but it
  *         differs from the expected value.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a MAC algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
@@ -1355,16 +1355,16 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a MAC algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
@@ -1417,16 +1417,16 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c key is not compatible with \c alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \c alg is not supported or is not a MAC algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
@@ -1454,11 +1454,11 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -1502,11 +1502,11 @@
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p mac buffer is too small. You can determine a
  *         sufficient buffer size by calling PSA_MAC_LENGTH().
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active mac sign
  *         operation), or the library has not been previously initialized
@@ -1545,11 +1545,11 @@
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The MAC of the message was calculated successfully, but it
  *         differs from the expected MAC.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active mac verify
  *         operation), or the library has not been previously initialized
@@ -1577,10 +1577,10 @@
  *
  * \param[in,out] operation Initialized MAC operation.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -1616,18 +1616,18 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
- * \retval #PSA_ERROR_BUFFER_TOO_SMALL
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -1663,18 +1663,18 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
- * \retval #PSA_ERROR_BUFFER_TOO_SMALL
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -1776,17 +1776,17 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -1839,17 +1839,17 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -1882,11 +1882,11 @@
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p iv buffer is too small.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with no IV set),
  *         or the library has not been previously initialized
@@ -1923,11 +1923,11 @@
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The size of \p iv is not acceptable for the chosen algorithm,
  *         or the chosen algorithm does not use an IV.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active cipher
  *         encrypt operation, with no IV set), or the library has not been
@@ -1964,11 +1964,11 @@
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with an IV set
  *         if required for the algorithm), or the library has not been
@@ -2016,11 +2016,11 @@
  *         padding, and the ciphertext does not contain valid padding.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with an IV set
  *         if required for the algorithm), or the library has not been
@@ -2049,10 +2049,10 @@
  *
  * \param[in,out] operation     Initialized cipher operation.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -2105,23 +2105,23 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p ciphertext_size is too small.
  *         #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\c key_type, \p alg,
  *         \p plaintext_length) or
  *         #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p plaintext_length) can be used to
  *         determine the required buffer size.
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -2176,25 +2176,25 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The ciphertext is not authentic.
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p plaintext_size is too small.
  *         #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\c key_type, \p alg,
  *         \p ciphertext_length) or
  *         #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p ciphertext_length) can be used
  *         to determine the required buffer size.
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -2309,16 +2309,16 @@
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -2373,17 +2373,17 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or the
  *         library has not been previously initialized by psa_crypto_init().
@@ -2417,11 +2417,11 @@
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p nonce buffer is too small.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active aead encrypt
  *         operation, with no nonce set), or the library has not been
@@ -2457,11 +2457,11 @@
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The size of \p nonce is not acceptable for the chosen algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with no nonce
  *         set), or the library has not been previously initialized
@@ -2502,10 +2502,10 @@
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         At least one of the lengths is not acceptable for the chosen
  *         algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, and
  *         psa_aead_update_ad() and psa_aead_update() must not have been
@@ -2549,11 +2549,11 @@
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The total input length overflows the additional data length that
  *         was previously specified with psa_aead_set_lengths().
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, have a nonce
  *         set, have lengths set if required by the algorithm, and
@@ -2634,11 +2634,11 @@
  *         specified with psa_aead_set_lengths(), or
  *         the total input length overflows the plaintext length that
  *         was previously specified with psa_aead_set_lengths().
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, have a nonce
  *         set, and have lengths set if required by the algorithm), or the
@@ -2720,11 +2720,11 @@
  *         the total length of input to psa_aead_update() so far is
  *         less than the plaintext length that was previously
  *         specified with psa_aead_set_lengths().
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active encryption
  *         operation with a nonce set), or the library has not been previously
@@ -2803,11 +2803,11 @@
  *         the total length of input to psa_aead_update() so far is
  *         less than the plaintext length that was previously
  *         specified with psa_aead_set_lengths().
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active decryption
  *         operation with a nonce set), or the library has not been previously
@@ -2838,10 +2838,10 @@
  *
  * \param[in,out] operation     Initialized AEAD operation.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -2887,8 +2887,8 @@
  * \param[out] signature_length On success, the number of bytes that make up
  *                              the returned signature value.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag,
  *         or it does not permit the requested algorithm.
@@ -2898,16 +2898,16 @@
  *         #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -2943,23 +2943,23 @@
  * \param[out] signature        Buffer containing the signature to verify.
  * \param[in]  signature_length Size of the \p signature buffer in bytes.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag,
  *         or it does not permit the requested algorithm.
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed signature
  *         is not a valid signature.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -2996,23 +2996,23 @@
  * \param[out] signature_length On success, the number of bytes
  *                              that make up the returned signature value.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -3052,18 +3052,18 @@
  *
  * \retval #PSA_SUCCESS
  *         The signature is valid.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed
  *         signature is not a valid signature.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -3105,23 +3105,23 @@
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -3165,24 +3165,24 @@
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
- * \retval #PSA_ERROR_INVALID_PADDING
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
+ * \retval #PSA_ERROR_INVALID_PADDING \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -3298,11 +3298,11 @@
  *         \c alg is not a key derivation algorithm.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \c alg is not supported or is not a key derivation algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -3322,10 +3322,10 @@
  * \param[in] operation     The operation to query.
  * \param[out] capacity     On success, the capacity of the operation.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -3346,14 +3346,14 @@
  *                          It must be less or equal to the operation's
  *                          current capacity.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p capacity is larger than the operation's current capacity.
  *         In this case, the operation object remains valid and its capacity
  *         remains unchanged.
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or the
  *         library has not been previously initialized by psa_crypto_init().
@@ -3402,11 +3402,11 @@
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c step is not compatible with the operation's algorithm, or
  *         \c step does not allow direct inputs.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid for this input \p step, or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -3447,17 +3447,17 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c step is not compatible with the operation's algorithm, or
  *         \c step does not allow key inputs of the given type
  *         or does not allow key inputs at all.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid for this input \p step, or
  *         the library has not been previously initialized by psa_crypto_init().
@@ -3512,8 +3512,8 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c private_key is not compatible with \c alg,
  *         or \p peer_key is not valid for \c alg or not compatible with
@@ -3521,11 +3521,11 @@
  *         from a key agreement.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \c alg is not supported or is not a key derivation algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid for this key agreement \p step,
  *         or the library has not been previously initialized by psa_crypto_init().
@@ -3556,7 +3556,7 @@
  * \param[out] output       Buffer where the output will be written.
  * \param output_length     Number of bytes to output.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_DATA
  *                          The operation's capacity was less than
  *                          \p output_length bytes. Note that in this case,
@@ -3564,11 +3564,11 @@
  *                          The operation's capacity is set to 0, thus
  *                          subsequent calls to this function will not
  *                          succeed, even with a smaller output buffer.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
@@ -3705,14 +3705,14 @@
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The #PSA_KEY_DERIVATION_INPUT_SECRET input was not provided through
  *         a key.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
@@ -3739,10 +3739,10 @@
  *
  * \param[in,out] operation    The operation to abort.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -3780,8 +3780,8 @@
  *
  * \retval #PSA_SUCCESS
  *         Success.
- * \retval #PSA_ERROR_INVALID_HANDLE
- * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p alg is not a key agreement algorithm, or
  *         \p private_key is not compatible with \p alg,
@@ -3791,11 +3791,11 @@
  *         \p output_size is too small
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not a supported key agreement algorithm.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -3827,13 +3827,13 @@
  * \param[out] output       Output buffer for the generated data.
  * \param output_size       Number of bytes to generate and output.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -3870,17 +3870,17 @@
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
diff --git a/include/psa/crypto_compat.h b/include/psa/crypto_compat.h
index 7ae6cbb..5cb225b 100644
--- a/include/psa/crypto_compat.h
+++ b/include/psa/crypto_compat.h
@@ -470,11 +470,11 @@
  *         permission to access it. Note that this specification does not
  *         define any way to create such a key, but it may be possible
  *         through implementation-specific means.
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -514,8 +514,8 @@
  *         \p handle was a valid handle or \c 0. It is now closed.
  * \retval #PSA_ERROR_INVALID_HANDLE
  *         \p handle is not a valid handle nor \c 0.
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
diff --git a/include/psa/crypto_extra.h b/include/psa/crypto_extra.h
index b62acdb..fa3e383 100644
--- a/include/psa/crypto_extra.h
+++ b/include/psa/crypto_extra.h
@@ -187,12 +187,12 @@
  *         or the specified slot number is not valid.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The caller is not authorized to register the specified key slot.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
@@ -487,10 +487,10 @@
  *                              according to \p type as described above.
  * \param data_length           Size of the \p data buffer in bytes.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t psa_set_key_domain_parameters(psa_key_attributes_t *attributes,
                                            psa_key_type_t type,
@@ -517,8 +517,8 @@
  * \param[out] data_length      On success, the number of bytes
  *                              that make up the key domain parameters data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL \emptydescription
  */
 psa_status_t psa_get_key_domain_parameters(
     const psa_key_attributes_t *attributes,
diff --git a/include/psa/crypto_se_driver.h b/include/psa/crypto_se_driver.h
index bffebdd..e2acb71 100644
--- a/include/psa/crypto_se_driver.h
+++ b/include/psa/crypto_se_driver.h
@@ -384,8 +384,8 @@
  * \param[in] direction         Indicates whether the operation is an encrypt
  *                              or decrypt
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_cipher_setup_t)(psa_drv_se_context_t *drv_context,
                                                   void *op_context,
@@ -406,7 +406,7 @@
  * \param[in] p_iv              A buffer containing the initialization vector
  * \param[in] iv_length         The size (in bytes) of the `p_iv` buffer
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_cipher_set_iv_t)(void *op_context,
                                                    const uint8_t *p_iv,
@@ -428,7 +428,7 @@
  * \param[out] p_output_length      After completion, will contain the number
  *                                  of bytes placed in the `p_output` buffer
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_cipher_update_t)(void *op_context,
                                                    const uint8_t *p_input,
@@ -449,7 +449,7 @@
  * \param[out] p_output_length  After completion, will contain the number of
  *                              bytes placed in the `p_output` buffer
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_cipher_finish_t)(void *op_context,
                                                    uint8_t *p_output,
@@ -484,8 +484,8 @@
  * \param[in] output_size       The allocated size in bytes of the `p_output`
  *                              buffer
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_cipher_ecb_t)(psa_drv_se_context_t *drv_context,
                                                 psa_key_slot_number_t key_slot,
@@ -553,7 +553,7 @@
  * \param[out] p_signature_length   On success, the number of bytes
  *                                  that make up the returned signature value
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_asymmetric_sign_t)(psa_drv_se_context_t *drv_context,
                                                      psa_key_slot_number_t key_slot,
@@ -617,7 +617,7 @@
  * \param[out] p_output_length  On success, the number of bytes that make up
  *                              the returned output
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_asymmetric_encrypt_t)(psa_drv_se_context_t *drv_context,
                                                         psa_key_slot_number_t key_slot,
@@ -657,7 +657,7 @@
  * \param[out] p_output_length  On success, the number of bytes
  *                              that make up the returned output
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_asymmetric_decrypt_t)(psa_drv_se_context_t *drv_context,
                                                         psa_key_slot_number_t key_slot,
@@ -903,8 +903,8 @@
  *         Success.
  *         The core will record \c *key_slot as the key slot where the key
  *         is stored and will update the persistent data in storage.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_allocate_key_t)(
     psa_drv_se_context_t *drv_context,
@@ -1042,13 +1042,13 @@
  * \param[out] p_data_length    On success, the number of bytes
  *                              that make up the key data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_DOES_NOT_EXIST
- * \retval #PSA_ERROR_NOT_PERMITTED
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_DOES_NOT_EXIST \emptydescription
+ * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_export_key_t)(psa_drv_se_context_t *drv_context,
                                                 psa_key_slot_number_t key,
@@ -1195,7 +1195,7 @@
  * \param[in] source_key        The key to be used as the source material for
  *                              the key derivation
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_key_derivation_setup_t)(psa_drv_se_context_t *drv_context,
                                                           void *op_context,
@@ -1215,7 +1215,7 @@
  * \param[in] p_collateral      A buffer containing the collateral data
  * \param[in] collateral_size   The size in bytes of the collateral
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_key_derivation_collateral_t)(void *op_context,
                                                                uint32_t collateral_id,
@@ -1230,7 +1230,7 @@
  * \param[in] dest_key          The slot where the generated key material
  *                              should be placed
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_key_derivation_derive_t)(void *op_context,
                                                            psa_key_slot_number_t dest_key);
@@ -1244,7 +1244,7 @@
  * \param[out] p_output_length  Upon success, contains the number of bytes of
  *                              key material placed in `p_output`
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 typedef psa_status_t (*psa_drv_se_key_derivation_export_t)(void *op_context,
                                                            uint8_t *p_output,
diff --git a/library/bignum.c b/library/bignum.c
index d915ade..5dca3a9 100644
--- a/library/bignum.c
+++ b/library/bignum.c
@@ -1427,6 +1427,7 @@
                  mbedtls_mpi_uint b)
 {
     mbedtls_mpi_uint c = 0, t = 0;
+    (void) t;                   /* Unused in some architectures */
 
 #if defined(MULADDC_HUIT)
     for (; i >= 8; i -= 8) {
@@ -1472,8 +1473,6 @@
     }
 #endif /* MULADDC_HUIT */
 
-    t++;
-
     while (c != 0) {
         *d += c; c = (*d < c); d++;
     }
diff --git a/library/psa_crypto.c b/library/psa_crypto.c
index 9976d72..d8a9940 100644
--- a/library/psa_crypto.c
+++ b/library/psa_crypto.c
@@ -1755,12 +1755,12 @@
  *
  * \retval #PSA_SUCCESS
  *         The key was successfully created.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_ALREADY_EXISTS
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_ALREADY_EXISTS \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  *
  * \return If this function fails, the key slot is an invalid state.
  *         You must call psa_fail_key_creation() to wipe and free the slot.
diff --git a/library/psa_crypto_aead.h b/library/psa_crypto_aead.h
index 320f835..8586c7b 100644
--- a/library/psa_crypto_aead.h
+++ b/library/psa_crypto_aead.h
@@ -71,10 +71,10 @@
  * \retval #PSA_SUCCESS Success.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         ciphertext_size is too small.
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_aead_encrypt(
     const psa_key_attributes_t *attributes,
@@ -134,10 +134,10 @@
  *         The cipher is not authentic.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         plaintext_size is too small.
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_aead_decrypt(
     const psa_key_attributes_t *attributes,
diff --git a/library/psa_crypto_cipher.h b/library/psa_crypto_cipher.h
index 6cc6bf6..bf43ff0 100644
--- a/library/psa_crypto_cipher.h
+++ b/library/psa_crypto_cipher.h
@@ -59,10 +59,10 @@
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_CIPHER(\p alg) is true).
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_cipher_encrypt_setup(
     mbedtls_psa_cipher_operation_t *operation,
@@ -89,10 +89,10 @@
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_CIPHER(\p alg) is true).
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_cipher_decrypt_setup(
     mbedtls_psa_cipher_operation_t *operation,
@@ -116,11 +116,11 @@
  *                              the core to be less or equal to
  *                              PSA_CIPHER_IV_MAX_SIZE.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The size of \p iv is not acceptable for the chosen algorithm,
  *         or the chosen algorithm does not use an IV.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_cipher_set_iv(
     mbedtls_psa_cipher_operation_t *operation,
@@ -142,10 +142,10 @@
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_cipher_update(
     mbedtls_psa_cipher_operation_t *operation,
@@ -165,7 +165,7 @@
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The total input size passed to this operation is not valid for
  *         this particular algorithm. For example, the algorithm is a based
@@ -176,7 +176,7 @@
  *         padding, and the ciphertext does not contain valid padding.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_cipher_finish(
     mbedtls_psa_cipher_operation_t *operation,
@@ -195,7 +195,7 @@
  *
  * \param[in,out] operation     Initialized cipher operation.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  */
 psa_status_t mbedtls_psa_cipher_abort(mbedtls_psa_cipher_operation_t *operation);
 
@@ -224,10 +224,10 @@
  *                              the returned output. Initialized to zero
  *                              by the core.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
@@ -275,10 +275,10 @@
  *                              the returned output. Initialized to zero
  *                              by the core.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
diff --git a/library/psa_crypto_core.h b/library/psa_crypto_core.h
index 672fb5d..688ea38 100644
--- a/library/psa_crypto_core.h
+++ b/library/psa_crypto_core.h
@@ -195,7 +195,7 @@
  * \retval #PSA_SUCCESS
  *         Success. This includes the case of a key slot that was
  *         already fully wiped.
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t psa_wipe_key_slot(psa_key_slot_t *slot);
 
@@ -271,9 +271,9 @@
  * \retval #PSA_SUCCESS  The key was imported successfully.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The key data is not correctly formatted.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t psa_import_key_into_slot(
     const psa_key_attributes_t *attributes,
@@ -296,12 +296,12 @@
  *                              \p data
  *
  * \retval #PSA_SUCCESS  The key was exported successfully.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t psa_export_key_internal(
     const psa_key_attributes_t *attributes,
@@ -324,12 +324,12 @@
  *                              \p data
  *
  * \retval #PSA_SUCCESS  The public key was exported successfully.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t psa_export_public_key_internal(
     const psa_key_attributes_t *attributes,
@@ -350,7 +350,7 @@
  *
  * \retval #PSA_SUCCESS
  *         The key was generated successfully.
- * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         Key size in bits or type not supported.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
@@ -385,18 +385,18 @@
  * \param[out] signature_length On success, the number of bytes
  *                              that make up the returned signature value.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of the key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  */
 psa_status_t psa_sign_message_builtin(
     const psa_key_attributes_t *attributes,
@@ -431,9 +431,9 @@
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed
  *         signature is not a valid signature.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t psa_verify_message_builtin(
     const psa_key_attributes_t *attributes,
@@ -461,18 +461,18 @@
  * \param[out] signature_length On success, the number of bytes
  *                              that make up the returned signature value.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of the key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  */
 psa_status_t psa_sign_hash_builtin(
     const psa_key_attributes_t *attributes,
@@ -505,9 +505,9 @@
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed
  *         signature is not a valid signature.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t psa_verify_hash_builtin(
     const psa_key_attributes_t *attributes,
diff --git a/library/psa_crypto_ecp.h b/library/psa_crypto_ecp.h
index b6dc247..7541c77 100644
--- a/library/psa_crypto_ecp.h
+++ b/library/psa_crypto_ecp.h
@@ -70,9 +70,9 @@
  * \retval #PSA_SUCCESS  The ECP key was imported successfully.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The key data is not correctly formatted.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_ecp_import_key(
     const psa_key_attributes_t *attributes,
@@ -111,12 +111,12 @@
  *                              \p data
  *
  * \retval #PSA_SUCCESS  The ECP public key was exported successfully.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_ecp_export_public_key(
     const psa_key_attributes_t *attributes,
@@ -166,17 +166,17 @@
  * \param[out] signature_length On success, the number of bytes
  *                              that make up the returned signature value.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c PSA_KEY_TYPE_ECC_KEY_PAIR, \c key_bits,
  *         \p alg) where \c key_bits is the bit-size of the ECC key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  */
 psa_status_t mbedtls_psa_ecdsa_sign_hash(
     const psa_key_attributes_t *attributes,
@@ -209,9 +209,9 @@
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed
  *         signature is not a valid signature.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_ecdsa_verify_hash(
     const psa_key_attributes_t *attributes,
diff --git a/library/psa_crypto_hash.h b/library/psa_crypto_hash.h
index ab07231..1c1b451 100644
--- a/library/psa_crypto_hash.h
+++ b/library/psa_crypto_hash.h
@@ -57,8 +57,8 @@
  *         \p alg is not supported
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p hash_size is too small
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_hash_compute(
     psa_algorithm_t alg,
@@ -97,8 +97,8 @@
  *         \p alg is not supported
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive).
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_hash_setup(
     mbedtls_psa_hash_operation_t *operation,
@@ -124,13 +124,13 @@
  * \param[in,out] target_operation  The operation object to set up.
  *                                  It must be initialized but not active.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The \p source_operation state is not valid (it must be active).
  * \retval #PSA_ERROR_BAD_STATE
  *         The \p target_operation state is not valid (it must be inactive).
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_hash_clone(
     const mbedtls_psa_hash_operation_t *source_operation,
@@ -156,8 +156,8 @@
  *         Success.
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active).
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_hash_update(
     mbedtls_psa_hash_operation_t *operation,
@@ -195,8 +195,8 @@
  *         The size of the \p hash buffer is too small. You can determine a
  *         sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg)
  *         where \c alg is the hash algorithm that is calculated.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_hash_finish(
     mbedtls_psa_hash_operation_t *operation,
@@ -225,8 +225,8 @@
  *
  * \param[in,out] operation     Initialized hash operation.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_hash_abort(
     mbedtls_psa_hash_operation_t *operation);
diff --git a/library/psa_crypto_mac.h b/library/psa_crypto_mac.h
index 21c4de6..4f8024a 100644
--- a/library/psa_crypto_mac.h
+++ b/library/psa_crypto_mac.h
@@ -52,8 +52,8 @@
  *         \p alg is not supported.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p mac_size is too small
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_mac_compute(
     const psa_key_attributes_t *attributes,
@@ -89,8 +89,8 @@
  *         Success.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive).
  */
@@ -124,8 +124,8 @@
  *         Success.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive).
  */
@@ -158,8 +158,8 @@
  *         Success.
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active).
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_mac_update(
     mbedtls_psa_mac_operation_t *operation,
@@ -200,8 +200,8 @@
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p mac buffer is too small. A sufficient buffer size
  *         can be determined by calling PSA_MAC_LENGTH().
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_mac_sign_finish(
     mbedtls_psa_mac_operation_t *operation,
@@ -241,8 +241,8 @@
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active mac verify
  *         operation).
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_mac_verify_finish(
     mbedtls_psa_mac_operation_t *operation,
@@ -267,8 +267,8 @@
  *
  * \param[in,out] operation Initialized MAC operation.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_mac_abort(
     mbedtls_psa_mac_operation_t *operation);
diff --git a/library/psa_crypto_rsa.h b/library/psa_crypto_rsa.h
index cee2f52..82ea474 100644
--- a/library/psa_crypto_rsa.h
+++ b/library/psa_crypto_rsa.h
@@ -61,9 +61,9 @@
  * \retval #PSA_SUCCESS  The RSA key was imported successfully.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The key data is not correctly formatted.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  */
 psa_status_t mbedtls_psa_rsa_import_key(
     const psa_key_attributes_t *attributes,
@@ -102,12 +102,12 @@
  *                              \p data.
  *
  * \retval #PSA_SUCCESS  The RSA public key was exported successfully.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_COMMUNICATION_FAILURE
- * \retval #PSA_ERROR_HARDWARE_FAILURE
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
+ * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_rsa_export_public_key(
     const psa_key_attributes_t *attributes,
@@ -158,17 +158,17 @@
  * \param[out] signature_length On success, the number of bytes
  *                              that make up the returned signature value.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c PSA_KEY_TYPE_RSA_KEY_PAIR, \c key_bits,
  *         \p alg) where \c key_bits is the bit-size of the RSA key.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  */
 psa_status_t mbedtls_psa_rsa_sign_hash(
     const psa_key_attributes_t *attributes,
@@ -202,9 +202,9 @@
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed
  *         signature is not a valid signature.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  */
 psa_status_t mbedtls_psa_rsa_verify_hash(
     const psa_key_attributes_t *attributes,
diff --git a/library/psa_crypto_slot_management.h b/library/psa_crypto_slot_management.h
index ff8ccde..c8366ab 100644
--- a/library/psa_crypto_slot_management.h
+++ b/library/psa_crypto_slot_management.h
@@ -88,9 +88,9 @@
  *         due to a lack of empty key slot, or available memory.
  * \retval #PSA_ERROR_DOES_NOT_EXIST
  *         There is no key with key identifier \p key.
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  */
 psa_status_t psa_get_and_lock_key_slot(mbedtls_svc_key_id_t key,
                                        psa_key_slot_t **p_slot);
@@ -118,9 +118,9 @@
  *                               associated to the returned slot.
  * \param[out] p_slot            On success, a pointer to the slot.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_BAD_STATE
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_BAD_STATE \emptydescription
  */
 psa_status_t psa_get_empty_key_slot(psa_key_id_t *volatile_key_id,
                                     psa_key_slot_t **p_slot);
@@ -195,8 +195,8 @@
  *                          storage, returns a pointer to the driver table
  *                          associated with the key's storage location.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  */
 psa_status_t psa_validate_key_location(psa_key_lifetime_t lifetime,
                                        psa_se_drv_table_entry_t **p_drv);
@@ -205,7 +205,7 @@
  *
  * \param[in] lifetime  The key lifetime attribute.
  *
- * \retval #PSA_SUCCESS
+ * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_NOT_SUPPORTED The key is persistent but persistent keys
  *             are not supported.
  */
diff --git a/library/psa_crypto_storage.c b/library/psa_crypto_storage.c
index 037a326..688940b 100644
--- a/library/psa_crypto_storage.c
+++ b/library/psa_crypto_storage.c
@@ -77,11 +77,11 @@
  * \param[out] data         Buffer where the data is to be written.
  * \param data_size         Size of the \c data buffer in bytes.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DOES_NOT_EXIST
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DOES_NOT_EXIST \emptydescription
  */
 static psa_status_t psa_crypto_storage_load(
     const mbedtls_svc_key_id_t key, uint8_t *data, size_t data_size)
@@ -129,11 +129,11 @@
  * \param data_length   The number of bytes
  *                      that make up the data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_ALREADY_EXISTS
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_ALREADY_EXISTS \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  */
 static psa_status_t psa_crypto_storage_store(const mbedtls_svc_key_id_t key,
                                              const uint8_t *data,
@@ -203,10 +203,10 @@
  *                          is to be obtained.
  * \param[out] data_length  The number of bytes that make up the data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DOES_NOT_EXIST
- * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DOES_NOT_EXIST \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  */
 static psa_status_t psa_crypto_storage_get_data_length(
     const mbedtls_svc_key_id_t key,
diff --git a/library/psa_crypto_storage.h b/library/psa_crypto_storage.h
index 8e108c5..04768f8 100644
--- a/library/psa_crypto_storage.h
+++ b/library/psa_crypto_storage.h
@@ -96,14 +96,14 @@
  * \param[in] data          Buffer containing the key data.
  * \param data_length       The number of bytes that make up the key data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INVALID_ARGUMENT
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_ALREADY_EXISTS
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_ALREADY_EXISTS \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  */
 psa_status_t psa_save_persistent_key(const psa_core_key_attributes_t *attr,
                                      const uint8_t *data,
@@ -129,11 +129,11 @@
  * \param[out] data         Pointer to an allocated key data buffer on return.
  * \param[out] data_length  The number of bytes that make up the key data.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_DOES_NOT_EXIST
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_DOES_NOT_EXIST \emptydescription
  */
 psa_status_t psa_load_persistent_key(psa_core_key_attributes_t *attr,
                                      uint8_t **data,
@@ -148,7 +148,7 @@
  * \retval #PSA_SUCCESS
  *         The key was successfully removed,
  *         or the key did not exist.
- * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  */
 psa_status_t psa_destroy_persistent_key(const mbedtls_svc_key_id_t key);
 
@@ -190,9 +190,9 @@
  * \param[out] attr            On success, the attribute structure is filled
  *                             with the loaded key metadata.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  */
 psa_status_t psa_parse_key_data_from_storage(const uint8_t *storage_data,
                                              size_t storage_data_length,
@@ -322,10 +322,10 @@
  * You may call this function multiple times during a transaction to
  * atomically update the transaction state.
  *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_DATA_CORRUPT
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
- * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_SUCCESS \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  */
 psa_status_t psa_crypto_save_transaction(void);
 
@@ -339,9 +339,9 @@
  *         #psa_crypto_transaction.
  * \retval #PSA_ERROR_DOES_NOT_EXIST
  *         There is no ongoing transaction.
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_DATA_INVALID
- * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_DATA_INVALID \emptydescription
+ * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  */
 psa_status_t psa_crypto_load_transaction(void);
 
@@ -380,8 +380,8 @@
  *
  * \retval #PSA_SUCCESS
  *         Success
- * \retval #PSA_ERROR_STORAGE_FAILURE
- * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
+ * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The entropy seed file already exists.
  */
diff --git a/tests/compat.sh b/tests/compat.sh
index f96c4e4..e7f9d49 100755
--- a/tests/compat.sh
+++ b/tests/compat.sh
@@ -861,6 +861,16 @@
     esac
 }
 
+# o_check_ciphersuite CIPHER_SUITE_NAME
+o_check_ciphersuite()
+{
+    if [ "${O_SUPPORT_ECDH}" = "NO" ]; then
+        case "$1" in
+            *ECDH-*) SKIP_NEXT="YES"
+        esac
+    fi
+}
+
 setup_arguments()
 {
     O_MODE=""
@@ -947,6 +957,11 @@
             ;;
     esac
 
+    case $($OPENSSL ciphers ALL) in
+        *ECDH-ECDSA*|*ECDH-RSA*) O_SUPPORT_ECDH="YES";;
+        *) O_SUPPORT_ECDH="NO";;
+    esac
+
     if [ "X$VERIFY" = "XYES" ];
     then
         M_SERVER_ARGS="$M_SERVER_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required"
@@ -1160,7 +1175,7 @@
             if [ $EXIT -eq 0 ]; then
                 RESULT=0
             else
-                # If the cipher isn't supported...
+                # If it is NULL cipher ...
                 if grep 'Cipher is (NONE)' $CLI_OUT >/dev/null; then
                     RESULT=1
                 else
@@ -1373,6 +1388,7 @@
                     if [ "X" != "X$M_CIPHERS" ]; then
                         start_server "OpenSSL"
                         for i in $M_CIPHERS; do
+                            o_check_ciphersuite "$i"
                             run_client mbedTLS $i
                         done
                         stop_server
@@ -1381,6 +1397,7 @@
                     if [ "X" != "X$O_CIPHERS" ]; then
                         start_server "mbedTLS"
                         for i in $O_CIPHERS; do
+                            o_check_ciphersuite "$i"
                             run_client OpenSSL $i
                         done
                         stop_server
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 1490bd0..2da9fe2 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -376,7 +376,7 @@
 
     msg "build: ARM Compiler 6 ($FLAGS)"
     ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \
-                    WARNING_CFLAGS='-xc -std=c99' make lib
+                    WARNING_CFLAGS='-Werror -xc -std=c99' make lib
 
     msg "size: ARM Compiler 6 ($FLAGS)"
     "$ARMC6_FROMELF" -z library/*.o
diff --git a/tests/scripts/depends.py b/tests/scripts/depends.py
index b8bcfd2..f107dd5 100755
--- a/tests/scripts/depends.py
+++ b/tests/scripts/depends.py
@@ -23,7 +23,7 @@
 This script can be divided into several steps:
 
 First, include/mbedtls/config.h or a different config file passed
-in the arguments is parsed to extract any configuration options (collect_config_symbols).
+in the arguments is parsed to extract any configuration options (using config.py).
 
 Then, test domains (groups of jobs, tests) are built based on predefined data
 collected in the DomainData class. Here, each domain has five major traits:
@@ -59,6 +59,11 @@
 import subprocess
 import sys
 import traceback
+from typing import Union
+
+# Add the Mbed TLS Python library directory to the module search path
+import scripts_path # pylint: disable=unused-import
+import config
 
 class Colors: # pylint: disable=too-few-public-methods
     """Minimalistic support for colored output.
@@ -68,6 +73,7 @@
 stop switches the text color back to the default."""
     red = None
     green = None
+    cyan = None
     bold_red = None
     bold_green = None
     def __init__(self, options=None):
@@ -83,6 +89,7 @@
             normal = '\033[0m'
             self.red = ('\033[31m', normal)
             self.green = ('\033[32m', normal)
+            self.cyan = ('\033[36m', normal)
             self.bold_red = ('\033[1;31m', normal)
             self.bold_green = ('\033[1;32m', normal)
 NO_COLORS = Colors(None)
@@ -118,34 +125,38 @@
     else:
         shutil.copy(options.config_backup, options.config)
 
-def run_config_py(options, args):
-    """Run scripts/config.py with the specified arguments."""
-    cmd = ['scripts/config.py']
-    if options.config != 'include/mbedtls/config.h':
-        cmd += ['--file', options.config]
-    cmd += args
-    log_command(cmd)
-    subprocess.check_call(cmd)
+def option_exists(conf, option):
+    return option in conf.settings
 
-def set_reference_config(options):
+def set_config_option_value(conf, option, colors, value: Union[bool, str]):
+    """Set/unset a configuration option, optionally specifying a value.
+value can be either True/False (set/unset config option), or a string,
+which will make a symbol defined with a certain value."""
+    if not option_exists(conf, option):
+        log_line('Symbol {} was not found in {}'.format(option, conf.filename), color=colors.red)
+        return False
+
+    if value is False:
+        log_command(['config.py', 'unset', option])
+        conf.unset(option)
+    elif value is True:
+        log_command(['config.py', 'set', option])
+        conf.set(option)
+    else:
+        log_command(['config.py', 'set', option, value])
+        conf.set(option, value)
+    return True
+
+def set_reference_config(conf, options, colors):
     """Change the library configuration file (config.h) to the reference state.
 The reference state is the one from which the tested configurations are
 derived."""
     # Turn off options that are not relevant to the tests and slow them down.
-    run_config_py(options, ['full'])
-    run_config_py(options, ['unset', 'MBEDTLS_TEST_HOOKS'])
+    log_command(['config.py', 'full'])
+    conf.adapt(config.full_adapter)
+    set_config_option_value(conf, 'MBEDTLS_TEST_HOOKS', colors, False)
     if options.unset_use_psa:
-        run_config_py(options, ['unset', 'MBEDTLS_USE_PSA_CRYPTO'])
-
-def collect_config_symbols(options):
-    """Read the list of settings from config.h.
-Return them in a generator."""
-    with open(options.config, encoding="utf-8") as config_file:
-        rx = re.compile(r'\s*(?://\s*)?#define\s+(\w+)\s*(?:$|/[/*])')
-        for line in config_file:
-            m = re.match(rx, line)
-            if m:
-                yield m.group(1)
+        set_config_option_value(conf, 'MBEDTLS_USE_PSA_CRYPTO', colors, False)
 
 class Job:
     """A job builds the library in a specific configuration and runs some tests."""
@@ -173,19 +184,16 @@
         elif what is False:
             log_line(self.name + ' FAILED', color=colors.red)
         else:
-            log_line('starting ' + self.name)
+            log_line('starting ' + self.name, color=colors.cyan)
 
-    def configure(self, options):
+    def configure(self, conf, options, colors):
         '''Set library configuration options as required for the job.'''
-        set_reference_config(options)
+        set_reference_config(conf, options, colors)
         for key, value in sorted(self.config_settings.items()):
-            if value is True:
-                args = ['set', key]
-            elif value is False:
-                args = ['unset', key]
-            else:
-                args = ['set', key, value]
-            run_config_py(options, args)
+            ret = set_config_option_value(conf, key, colors, value)
+            if ret is False:
+                return False
+        return True
 
     def test(self, options):
         '''Run the job's build and test commands.
@@ -251,11 +259,7 @@
                       'MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED'],
     'MBEDTLS_SHA1_C': SSL_PRE_1_2_DEPENDENCIES,
     'MBEDTLS_SHA256_C': ['MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED',
-                         'MBEDTLS_ENTROPY_FORCE_SHA256',
-                         'MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT',
-                         'MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY'],
-    'MBEDTLS_SHA512_C': ['MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT',
-                         'MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY'],
+                         'MBEDTLS_ENTROPY_FORCE_SHA256'],
     'MBEDTLS_X509_RSASSA_PSS_SUPPORT': []
 }
 
@@ -400,11 +404,11 @@
         return [symbol for symbol in self.all_config_symbols
                 if re.match(regexp, symbol)]
 
-    def __init__(self, options):
+    def __init__(self, options, conf):
         """Gather data about the library and establish a list of domains to test."""
         build_command = [options.make_command, 'CFLAGS=-Werror']
         build_and_test = [build_command, [options.make_command, 'test']]
-        self.all_config_symbols = set(collect_config_symbols(options))
+        self.all_config_symbols = set(conf.settings.keys())
         # Find hash modules by name.
         hash_symbols = self.config_symbols_matching(r'MBEDTLS_(MD|RIPEMD|SHA)[0-9]+_C\Z')
         hash_symbols.append("MBEDTLS_SHA512_NO_SHA384")
@@ -456,16 +460,19 @@
         else:
             return [self.jobs[name]]
 
-def run(options, job, colors=NO_COLORS):
+def run(options, job, conf, colors=NO_COLORS):
     """Run the specified job (a Job instance)."""
     subprocess.check_call([options.make_command, 'clean'])
     job.announce(colors, None)
-    job.configure(options)
+    if not job.configure(conf, options, colors):
+        job.announce(colors, False)
+        return False
+    conf.write()
     success = job.test(options)
     job.announce(colors, success)
     return success
 
-def run_tests(options, domain_data):
+def run_tests(options, domain_data, conf):
     """Run the desired jobs.
 domain_data should be a DomainData instance that describes the available
 domains and jobs.
@@ -481,7 +488,7 @@
     backup_config(options)
     try:
         for job in jobs:
-            success = run(options, job, colors=colors)
+            success = run(options, job, conf, colors=colors)
             if not success:
                 if options.keep_going:
                     failures.append(job.name)
@@ -547,7 +554,9 @@
                             default=True)
         options = parser.parse_args()
         os.chdir(options.directory)
-        domain_data = DomainData(options)
+        conf = config.ConfigFile(options.config)
+        domain_data = DomainData(options, conf)
+
         if options.tasks is True:
             options.tasks = sorted(domain_data.domains.keys())
         if options.list:
@@ -556,7 +565,7 @@
                     print(domain_name)
             sys.exit(0)
         else:
-            sys.exit(0 if run_tests(options, domain_data) else 1)
+            sys.exit(0 if run_tests(options, domain_data, conf) else 1)
     except Exception: # pylint: disable=broad-except
         traceback.print_exc()
         sys.exit(3)
diff --git a/tests/suites/test_suite_psa_crypto.function b/tests/suites/test_suite_psa_crypto.function
index 214096c..5bd7b36 100644
--- a/tests/suites/test_suite_psa_crypto.function
+++ b/tests/suites/test_suite_psa_crypto.function
@@ -4173,7 +4173,11 @@
                                            output, output_size,
                                            &output_length);
     TEST_EQUAL(actual_status, expected_status);
-    TEST_EQUAL(output_length, expected_output_length);
+    if (actual_status == PSA_SUCCESS) {
+        TEST_EQUAL(output_length, expected_output_length);
+    } else {
+        TEST_LE_U(output_length, output_size);
+    }
 
     /* If the label is empty, the test framework puts a non-null pointer
      * in label->x. Test that a null pointer works as well. */
@@ -4188,7 +4192,11 @@
                                                output, output_size,
                                                &output_length);
         TEST_EQUAL(actual_status, expected_status);
-        TEST_EQUAL(output_length, expected_output_length);
+        if (actual_status == PSA_SUCCESS) {
+            TEST_EQUAL(output_length, expected_output_length);
+        } else {
+            TEST_LE_U(output_length, output_size);
+        }
     }
 
 exit: