Correct some msg messages in full config
When MBEDTLS_USE_PSA_CRYPTO is disabled on a base of full, mention it.
Don't explicitly mention MBEDTLS_PSA_CRYPTO_CONFIG when also mentioning
PSA_WANT_xxx, since PSA_WANT symbols are only meaningful when
MBEDTLS_PSA_CRYPTO_CONFIG is enabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 470cd91..7da895b 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -2159,7 +2159,7 @@
# This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test.
component_build_psa_accel_alg_ecdh() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2176,7 +2176,7 @@
# This should be renamed to test and updated once the accelerator ECC key pair code is in place and ready to test.
component_build_psa_accel_key_type_ecc_key_pair() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_ECC_KEY_PAIR"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_ECC_KEY_PAIR"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2189,7 +2189,7 @@
# This should be renamed to test and updated once the accelerator ECC public key code is in place and ready to test.
component_build_psa_accel_key_type_ecc_public_key() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2202,7 +2202,7 @@
# This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test.
component_build_psa_accel_alg_hmac() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_HMAC"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2213,7 +2213,7 @@
# This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test.
component_build_psa_accel_alg_hkdf() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2227,7 +2227,7 @@
# This should be renamed to test and updated once the accelerator MD2 code is in place and ready to test.
component_build_psa_accel_alg_md2() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_MD2 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD2 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2246,7 +2246,7 @@
# This should be renamed to test and updated once the accelerator MD4 code is in place and ready to test.
component_build_psa_accel_alg_md4() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_MD4 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD4 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2265,7 +2265,7 @@
# This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test.
component_build_psa_accel_alg_md5() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_MD5 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD5 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2284,7 +2284,7 @@
# This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test.
component_build_psa_accel_alg_ripemd160() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RIPEMD160 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RIPEMD160 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2303,7 +2303,7 @@
# This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test.
component_build_psa_accel_alg_sha1() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_1 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_1 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2322,7 +2322,7 @@
# This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test.
component_build_psa_accel_alg_sha224() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_224 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_224 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2340,7 +2340,7 @@
# This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test.
component_build_psa_accel_alg_sha256() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_256 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_256 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2359,7 +2359,7 @@
# This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test.
component_build_psa_accel_alg_sha384() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_384 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_384 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2377,7 +2377,7 @@
# This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test.
component_build_psa_accel_alg_sha512() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_512 - other hashes"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_512 - other hashes"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2396,7 +2396,7 @@
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_pkcs1v15_crypt() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2411,7 +2411,7 @@
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_pkcs1v15_sign() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2426,7 +2426,7 @@
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_oaep() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2441,7 +2441,7 @@
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_alg_rsa_pss() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2456,7 +2456,7 @@
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_key_type_rsa_key_pair() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR + PSA_WANT_ALG_RSA_PSS"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR + PSA_WANT_ALG_RSA_PSS"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS
@@ -2469,7 +2469,7 @@
# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
component_build_psa_accel_key_type_rsa_public_key() {
- msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS"
+ msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_PSA_CRYPTO_DRIVERS