Merge remote-tracking branch 'public/pr/2292' into development
diff --git a/ChangeLog b/ChangeLog
index 66a8ce9..de3b8ad 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -41,6 +41,14 @@
mbedtls_ctr_drbg_update() -> mbedtls_ctr_drbg_update_ret()
mbedtls_hmac_drbg_update() -> mbedtls_hmac_drbg_update_ret()
* Extend ECDH interface to enable alternative implementations.
+ * Deprecate the ARIA error MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH
+ in favour of a new generic error MBEDTLS_ERR_ARIA_BAD_INPUT_DATA.
+ * Deprecate the CAMELLIA error MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ in favour a new generic error MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA.
+ * Deprecate the Blowfish error MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
+ in favour of a new generic error MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA.
+ * Add validation checks for input parameters to functions in the CCM module.
+ * Add validation checks for input parameters to functions in the GCM module.
New deprecations
* Deprecate mbedtls_ctr_drbg_update and mbedtls_hmac_drbg_update
diff --git a/include/mbedtls/aes.h b/include/mbedtls/aes.h
index 11edc0f..b42e564 100644
--- a/include/mbedtls/aes.h
+++ b/include/mbedtls/aes.h
@@ -197,8 +197,10 @@
* sets the encryption key.
*
* \param ctx The AES XTS context to which the key should be bound.
+ * It must be initialized.
* \param key The encryption key. This is comprised of the XTS key1
* concatenated with the XTS key2.
+ * This must be a readable buffer of size \p keybits bits.
* \param keybits The size of \p key passed in bits. Valid options are:
* <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
* <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
@@ -215,8 +217,10 @@
* sets the decryption key.
*
* \param ctx The AES XTS context to which the key should be bound.
+ * It must be initialized.
* \param key The decryption key. This is comprised of the XTS key1
* concatenated with the XTS key2.
+ * This must be a readable buffer of size \p keybits bits.
* \param keybits The size of \p key passed in bits. Valid options are:
* <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
* <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
@@ -242,10 +246,13 @@
* call to this API with the same context.
*
* \param ctx The AES context to use for encryption or decryption.
+ * It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
- * \param input The 16-Byte buffer holding the input data.
- * \param output The 16-Byte buffer holding the output data.
+ * \param input The buffer holding the input data.
+ * It must be readable and at least \c 16 Bytes long.
+ * \param output The buffer where the output data will be written.
+ * It must be writeable and at least \c 16 Bytes long.
* \return \c 0 on success.
*/
@@ -268,8 +275,8 @@
* mbedtls_aes_setkey_enc() or mbedtls_aes_setkey_dec() must be called
* before the first call to this API with the same context.
*
- * \note This function operates on aligned blocks, that is, the input size
- * must be a multiple of the AES block size of 16 Bytes.
+ * \note This function operates on full blocks, that is, the input size
+ * must be a multiple of the AES block size of \c 16 Bytes.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the same function again on the next
@@ -280,13 +287,17 @@
*
*
* \param ctx The AES context to use for encryption or decryption.
+ * It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
* \param length The length of the input data in Bytes. This must be a
- * multiple of the block size (16 Bytes).
+ * multiple of the block size (\c 16 Bytes).
* \param iv Initialization vector (updated after use).
+ * It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
+ * It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
+ * It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH
@@ -314,9 +325,10 @@
* returns #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH.
*
* \param ctx The AES XTS context to use for AES XTS operations.
+ * It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
- * \param length The length of a data unit in bytes. This can be any
+ * \param length The length of a data unit in Bytes. This can be any
* length between 16 bytes and 2^24 bytes inclusive
* (between 1 and 2^20 block cipher blocks).
* \param data_unit The address of the data unit encoded as an array of 16
@@ -324,15 +336,15 @@
* is typically the index of the block device sector that
* contains the data.
* \param input The buffer holding the input data (which is an entire
- * data unit). This function reads \p length bytes from \p
+ * data unit). This function reads \p length Bytes from \p
* input.
* \param output The buffer holding the output data (which is an entire
- * data unit). This function writes \p length bytes to \p
+ * data unit). This function writes \p length Bytes to \p
* output.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH if \p length is
- * smaller than an AES block in size (16 bytes) or if \p
+ * smaller than an AES block in size (16 Bytes) or if \p
* length is larger than 2^20 blocks (16 MiB).
*/
int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx,
@@ -368,13 +380,18 @@
*
*
* \param ctx The AES context to use for encryption or decryption.
+ * It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
- * \param length The length of the input data.
+ * \param length The length of the input data in Bytes.
* \param iv_off The offset in IV (updated after use).
+ * It must point to a valid \c size_t.
* \param iv The initialization vector (updated after use).
+ * It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
+ * It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
+ * It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -409,12 +426,16 @@
*
*
* \param ctx The AES context to use for encryption or decryption.
+ * It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT
* \param length The length of the input data.
* \param iv The initialization vector (updated after use).
+ * It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
+ * It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
+ * It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -459,11 +480,16 @@
* will compromise security.
*
* \param ctx The AES context to use for encryption or decryption.
+ * It must be initialized and bound to a key.
* \param length The length of the input data.
* \param iv_off The offset in IV (updated after use).
+ * It must point to a valid \c size_t.
* \param iv The initialization vector (updated after use).
+ * It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
+ * It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
+ * It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -535,15 +561,21 @@
* securely discarded as soon as it's no longer needed.
*
* \param ctx The AES context to use for encryption or decryption.
+ * It must be initialized and bound to a key.
* \param length The length of the input data.
* \param nc_off The offset in the current \p stream_block, for
* resuming within the current cipher stream. The
* offset pointer should be 0 at the start of a stream.
+ * It must point to a valid \c size_t.
* \param nonce_counter The 128-bit nonce and counter.
+ * It must be a readable-writeable buffer of \c 16 Bytes.
* \param stream_block The saved stream block for resuming. This is
* overwritten by the function.
+ * It must be a readable-writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
+ * It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
+ * It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -596,7 +628,7 @@
* \brief Deprecated internal AES block encryption function
* without return value.
*
- * \deprecated Superseded by mbedtls_aes_encrypt_ext() in 2.5.0.
+ * \deprecated Superseded by mbedtls_internal_aes_encrypt()
*
* \param ctx The AES context to use for encryption.
* \param input Plaintext block.
@@ -610,7 +642,7 @@
* \brief Deprecated internal AES block decryption function
* without return value.
*
- * \deprecated Superseded by mbedtls_aes_decrypt_ext() in 2.5.0.
+ * \deprecated Superseded by mbedtls_internal_aes_decrypt()
*
* \param ctx The AES context to use for decryption.
* \param input Ciphertext block.
diff --git a/include/mbedtls/aesni.h b/include/mbedtls/aesni.h
index 746baa0..0196f49 100644
--- a/include/mbedtls/aesni.h
+++ b/include/mbedtls/aesni.h
@@ -2,6 +2,9 @@
* \file aesni.h
*
* \brief AES-NI for hardware AES acceleration on some Intel processors
+ *
+ * \warning These functions are only for internal use by other library
+ * functions; you must not call them directly.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
@@ -42,7 +45,10 @@
#endif
/**
- * \brief AES-NI features detection routine
+ * \brief Internal function to detect the AES-NI feature in CPUs.
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param what The feature to detect
* (MBEDTLS_AESNI_AES or MBEDTLS_AESNI_CLMUL)
@@ -52,7 +58,10 @@
int mbedtls_aesni_has_support( unsigned int what );
/**
- * \brief AES-NI AES-ECB block en(de)cryption
+ * \brief Internal AES-NI AES-ECB block encryption and decryption
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
@@ -62,12 +71,15 @@
* \return 0 on success (cannot fail)
*/
int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx,
- int mode,
- const unsigned char input[16],
- unsigned char output[16] );
+ int mode,
+ const unsigned char input[16],
+ unsigned char output[16] );
/**
- * \brief GCM multiplication: c = a * b in GF(2^128)
+ * \brief Internal GCM multiplication: c = a * b in GF(2^128)
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param c Result
* \param a First operand
@@ -77,21 +89,29 @@
* elements of GF(2^128) as per the GCM spec.
*/
void mbedtls_aesni_gcm_mult( unsigned char c[16],
- const unsigned char a[16],
- const unsigned char b[16] );
+ const unsigned char a[16],
+ const unsigned char b[16] );
/**
- * \brief Compute decryption round keys from encryption round keys
+ * \brief Internal round key inversion. This function computes
+ * decryption round keys from the encryption round keys.
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param invkey Round keys for the equivalent inverse cipher
* \param fwdkey Original round keys (for encryption)
* \param nr Number of rounds (that is, number of round keys minus one)
*/
void mbedtls_aesni_inverse_key( unsigned char *invkey,
- const unsigned char *fwdkey, int nr );
+ const unsigned char *fwdkey,
+ int nr );
/**
- * \brief Perform key expansion (for encryption)
+ * \brief Internal key expansion for encryption
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param rk Destination buffer where the round keys are written
* \param key Encryption key
@@ -100,8 +120,8 @@
* \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH
*/
int mbedtls_aesni_setkey_enc( unsigned char *rk,
- const unsigned char *key,
- size_t bits );
+ const unsigned char *key,
+ size_t bits );
#ifdef __cplusplus
}
diff --git a/include/mbedtls/aria.h b/include/mbedtls/aria.h
index 483d4c2..1e8956e 100644
--- a/include/mbedtls/aria.h
+++ b/include/mbedtls/aria.h
@@ -39,6 +39,8 @@
#include <stddef.h>
#include <stdint.h>
+#include "platform_util.h"
+
#define MBEDTLS_ARIA_ENCRYPT 1 /**< ARIA encryption. */
#define MBEDTLS_ARIA_DECRYPT 0 /**< ARIA decryption. */
@@ -46,8 +48,12 @@
#define MBEDTLS_ARIA_MAX_ROUNDS 16 /**< Maxiumum number of rounds in ARIA. */
#define MBEDTLS_ARIA_MAX_KEYSIZE 32 /**< Maximum size of an ARIA key in bytes. */
-#define MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH -0x005C /**< Invalid key length. */
-#define MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH -0x005E /**< Invalid data input length. */
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#define MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x005C )
+#endif /* !MBEDTLS_DEPRECATED_REMOVED */
+#define MBEDTLS_ERR_ARIA_BAD_INPUT_DATA -0x005C /**< Bad input data. */
+
+#define MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH -0x005E /**< Invalid data input length. */
/* MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE is deprecated and should not be used.
*/
@@ -85,14 +91,16 @@
* It must be the first API called before using
* the context.
*
- * \param ctx The ARIA context to initialize.
+ * \param ctx The ARIA context to initialize. This must not be \c NULL.
*/
void mbedtls_aria_init( mbedtls_aria_context *ctx );
/**
* \brief This function releases and clears the specified ARIA context.
*
- * \param ctx The ARIA context to clear.
+ * \param ctx The ARIA context to clear. This may be \c NULL, in which
+ * case this function returns immediately. If it is not \c NULL,
+ * it must point to an initialized ARIA context.
*/
void mbedtls_aria_free( mbedtls_aria_context *ctx );
@@ -100,14 +108,16 @@
* \brief This function sets the encryption key.
*
* \param ctx The ARIA context to which the key should be bound.
- * \param key The encryption key.
- * \param keybits The size of data passed in bits. Valid options are:
+ * This must be initialized.
+ * \param key The encryption key. This must be a readable buffer
+ * of size \p keybits Bits.
+ * \param keybits The size of \p key in Bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
* <li>256 bits</li></ul>
*
- * \return \c 0 on success or #MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH
- * on failure.
+ * \return \c 0 on success.
+ * \return A negative error code on failure.
*/
int mbedtls_aria_setkey_enc( mbedtls_aria_context *ctx,
const unsigned char *key,
@@ -117,13 +127,16 @@
* \brief This function sets the decryption key.
*
* \param ctx The ARIA context to which the key should be bound.
- * \param key The decryption key.
+ * This must be initialized.
+ * \param key The decryption key. This must be a readable buffer
+ * of size \p keybits Bits.
* \param keybits The size of data passed. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
* <li>256 bits</li></ul>
*
- * \return \c 0 on success, or #MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH on failure.
+ * \return \c 0 on success.
+ * \return A negative error code on failure.
*/
int mbedtls_aria_setkey_dec( mbedtls_aria_context *ctx,
const unsigned char *key,
@@ -142,10 +155,12 @@
* call to this API with the same context.
*
* \param ctx The ARIA context to use for encryption or decryption.
+ * This must be initialized and bound to a key.
* \param input The 16-Byte buffer holding the input data.
* \param output The 16-Byte buffer holding the output data.
* \return \c 0 on success.
+ * \return A negative error code on failure.
*/
int mbedtls_aria_crypt_ecb( mbedtls_aria_context *ctx,
const unsigned char input[MBEDTLS_ARIA_BLOCKSIZE],
@@ -177,16 +192,21 @@
*
*
* \param ctx The ARIA context to use for encryption or decryption.
- * \param mode The ARIA operation: #MBEDTLS_ARIA_ENCRYPT or
- * #MBEDTLS_ARIA_DECRYPT.
+ * This must be initialized and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_ARIA_ENCRYPT for encryption, or
+ * #MBEDTLS_ARIA_DECRYPT for decryption.
* \param length The length of the input data in Bytes. This must be a
* multiple of the block size (16 Bytes).
* \param iv Initialization vector (updated after use).
- * \param input The buffer holding the input data.
- * \param output The buffer holding the output data.
+ * This must be a readable buffer of size 16 Bytes.
+ * \param input The buffer holding the input data. This must
+ * be a readable buffer of length \p length Bytes.
+ * \param output The buffer holding the output data. This must
+ * be a writable buffer of length \p length Bytes.
*
- * \return \c 0 on success, or #MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH
- * on failure.
+ * \return \c 0 on success.
+ * \return A negative error code on failure.
*/
int mbedtls_aria_crypt_cbc( mbedtls_aria_context *ctx,
int mode,
@@ -221,15 +241,22 @@
*
*
* \param ctx The ARIA context to use for encryption or decryption.
- * \param mode The ARIA operation: #MBEDTLS_ARIA_ENCRYPT or
- * #MBEDTLS_ARIA_DECRYPT.
- * \param length The length of the input data.
+ * This must be initialized and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_ARIA_ENCRYPT for encryption, or
+ * #MBEDTLS_ARIA_DECRYPT for decryption.
+ * \param length The length of the input data \p input in Bytes.
* \param iv_off The offset in IV (updated after use).
+ * This must not be larger than 15.
* \param iv The initialization vector (updated after use).
- * \param input The buffer holding the input data.
- * \param output The buffer holding the output data.
+ * This must be a readable buffer of size 16 Bytes.
+ * \param input The buffer holding the input data. This must
+ * be a readable buffer of length \p length Bytes.
+ * \param output The buffer holding the output data. This must
+ * be a writable buffer of length \p length Bytes.
*
* \return \c 0 on success.
+ * \return A negative error code on failure.
*/
int mbedtls_aria_crypt_cfb128( mbedtls_aria_context *ctx,
int mode,
@@ -299,17 +326,24 @@
* securely discarded as soon as it's no longer needed.
*
* \param ctx The ARIA context to use for encryption or decryption.
- * \param length The length of the input data.
- * \param nc_off The offset in the current \p stream_block, for
- * resuming within the current cipher stream. The
- * offset pointer should be 0 at the start of a stream.
- * \param nonce_counter The 128-bit nonce and counter.
- * \param stream_block The saved stream block for resuming. This is
- * overwritten by the function.
- * \param input The buffer holding the input data.
- * \param output The buffer holding the output data.
+ * This must be initialized and bound to a key.
+ * \param length The length of the input data \p input in Bytes.
+ * \param nc_off The offset in Bytes in the current \p stream_block,
+ * for resuming within the current cipher stream. The
+ * offset pointer should be \c 0 at the start of a
+ * stream. This must not be larger than \c 15 Bytes.
+ * \param nonce_counter The 128-bit nonce and counter. This must point to
+ * a read/write buffer of length \c 16 bytes.
+ * \param stream_block The saved stream block for resuming. This must
+ * point to a read/write buffer of length \c 16 bytes.
+ * This is overwritten by the function.
+ * \param input The buffer holding the input data. This must
+ * be a readable buffer of length \p length Bytes.
+ * \param output The buffer holding the output data. This must
+ * be a writable buffer of length \p length Bytes.
*
- * \return \c 0 on success.
+ * \return \c 0 on success.
+ * \return A negative error code on failure.
*/
int mbedtls_aria_crypt_ctr( mbedtls_aria_context *ctx,
size_t length,
diff --git a/include/mbedtls/blowfish.h b/include/mbedtls/blowfish.h
index 82b772a..f01573d 100644
--- a/include/mbedtls/blowfish.h
+++ b/include/mbedtls/blowfish.h
@@ -33,6 +33,8 @@
#include <stddef.h>
#include <stdint.h>
+#include "platform_util.h"
+
#define MBEDTLS_BLOWFISH_ENCRYPT 1
#define MBEDTLS_BLOWFISH_DECRYPT 0
#define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448
@@ -40,14 +42,17 @@
#define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */
#define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */
-#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH -0x0016 /**< Invalid key length. */
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0016 )
+#endif /* !MBEDTLS_DEPRECATED_REMOVED */
+#define MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA -0x0016 /**< Bad input data. */
+
+#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
/* MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED -0x0017 /**< Blowfish hardware accelerator failed. */
-#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
-
#ifdef __cplusplus
extern "C" {
#endif
@@ -71,40 +76,53 @@
#endif /* MBEDTLS_BLOWFISH_ALT */
/**
- * \brief Initialize Blowfish context
+ * \brief Initialize a Blowfish context.
*
- * \param ctx Blowfish context to be initialized
+ * \param ctx The Blowfish context to be initialized.
+ * This must not be \c NULL.
*/
void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx );
/**
- * \brief Clear Blowfish context
+ * \brief Clear a Blowfish context.
*
- * \param ctx Blowfish context to be cleared
+ * \param ctx The Blowfish context to be cleared.
+ * This may be \c NULL, in which case this function
+ * returns immediately. If it is not \c NULL, it must
+ * point to an initialized Blowfish context.
*/
void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx );
/**
- * \brief Blowfish key schedule
+ * \brief Perform a Blowfish key schedule operation.
*
- * \param ctx Blowfish context to be initialized
- * \param key encryption key
- * \param keybits must be between 32 and 448 bits
+ * \param ctx The Blowfish context to perform the key schedule on.
+ * \param key The encryption key. This must be a readable buffer of
+ * length \p keybits Bits.
+ * \param keybits The length of \p key in Bits. This must be between
+ * \c 32 and \c 448 and a multiple of \c 8.
*
- * \return 0 if successful, or MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
- * \brief Blowfish-ECB block encryption/decryption
+ * \brief Perform a Blowfish-ECB block encryption/decryption operation.
*
- * \param ctx Blowfish context
- * \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
- * \param input 8-byte input block
- * \param output 8-byte output block
+ * \param ctx The Blowfish context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. Possible values are
+ * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
+ * #MBEDTLS_BLOWFISH_DECRYPT for decryption.
+ * \param input The input block. This must be a readable buffer
+ * of size \c 8 Bytes.
+ * \param output The output block. This must be a writable buffer
+ * of size \c 8 Bytes.
*
- * \return 0 if successful
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
int mode,
@@ -113,9 +131,7 @@
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
- * \brief Blowfish-CBC buffer encryption/decryption
- * Length should be a multiple of the block
- * size (8 bytes)
+ * \brief Perform a Blowfish-CBC buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -125,15 +141,22 @@
* IV, you should either save it manually or use the cipher
* module instead.
*
- * \param ctx Blowfish context
- * \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
- * \param length length of the input data
- * \param iv initialization vector (updated after use)
- * \param input buffer holding the input data
- * \param output buffer holding the output data
+ * \param ctx The Blowfish context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. Possible values are
+ * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
+ * #MBEDTLS_BLOWFISH_DECRYPT for decryption.
+ * \param length The length of the input data in Bytes. This must be
+ * multiple of \c 8.
+ * \param iv The initialization vector. This must be a read/write buffer
+ * of length \c 8 Bytes. It is updated by this function.
+ * \param input The input data. This must be a readable buffer of length
+ * \p length Bytes.
+ * \param output The output data. This must be a writable buffer of length
+ * \p length Bytes.
*
- * \return 0 if successful, or
- * MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
int mode,
@@ -145,7 +168,7 @@
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
- * \brief Blowfish CFB buffer encryption/decryption.
+ * \brief Perform a Blowfish CFB buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -155,15 +178,25 @@
* IV, you should either save it manually or use the cipher
* module instead.
*
- * \param ctx Blowfish context
- * \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
- * \param length length of the input data
- * \param iv_off offset in IV (updated after use)
- * \param iv initialization vector (updated after use)
- * \param input buffer holding the input data
- * \param output buffer holding the output data
+ * \param ctx The Blowfish context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. Possible values are
+ * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
+ * #MBEDTLS_BLOWFISH_DECRYPT for decryption.
+ * \param length The length of the input data in Bytes.
+ * \param iv_off The offset in the initialiation vector.
+ * The value pointed to must be smaller than \c 8 Bytes.
+ * It is updated by this function to support the aforementioned
+ * streaming usage.
+ * \param iv The initialization vector. This must be a read/write buffer
+ * of size \c 8 Bytes. It is updated after use.
+ * \param input The input data. This must be a readable buffer of length
+ * \p length Bytes.
+ * \param output The output data. This must be a writable buffer of length
+ * \p length Bytes.
*
- * \return 0 if successful
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
int mode,
@@ -176,7 +209,7 @@
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
- * \brief Blowfish-CTR buffer encryption/decryption
+ * \brief Perform a Blowfish-CTR buffer encryption/decryption operation.
*
* \warning You must never reuse a nonce value with the same key. Doing so
* would void the encryption for the two messages encrypted with
@@ -219,18 +252,24 @@
* content must not be written to insecure storage and should be
* securely discarded as soon as it's no longer needed.
*
- * \param ctx Blowfish context
- * \param length The length of the data
+ * \param ctx The Blowfish context to use. This must be initialized
+ * and bound to a key.
+ * \param length The length of the input data in Bytes.
* \param nc_off The offset in the current stream_block (for resuming
- * within current cipher stream). The offset pointer to
- * should be 0 at the start of a stream.
- * \param nonce_counter The 64-bit nonce and counter.
- * \param stream_block The saved stream-block for resuming. Is overwritten
- * by the function.
- * \param input The input data stream
- * \param output The output data stream
+ * within current cipher stream). The offset pointer
+ * should be \c 0 at the start of a stream and must be
+ * smaller than \c 8. It is updated by this function.
+ * \param nonce_counter The 64-bit nonce and counter. This must point to a
+ * read/write buffer of length \c 8 Bytes.
+ * \param stream_block The saved stream-block for resuming. This must point to
+ * a read/write buffer of length \c 8 Bytes.
+ * \param input The input data. This must be a readable buffer of
+ * length \p length Bytes.
+ * \param output The output data. This must be a writable buffer of
+ * length \p length Bytes.
*
- * \return 0 if successful
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
size_t length,
diff --git a/include/mbedtls/camellia.h b/include/mbedtls/camellia.h
index 1555867..0f7c42c 100644
--- a/include/mbedtls/camellia.h
+++ b/include/mbedtls/camellia.h
@@ -33,11 +33,17 @@
#include <stddef.h>
#include <stdint.h>
+#include "platform_util.h"
+
#define MBEDTLS_CAMELLIA_ENCRYPT 1
#define MBEDTLS_CAMELLIA_DECRYPT 0
-#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH -0x0024 /**< Invalid key length. */
-#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0024 )
+#endif /* !MBEDTLS_DEPRECATED_REMOVED */
+#define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */
+
+#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
/* MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED is deprecated and should not be used.
*/
@@ -66,52 +72,68 @@
#endif /* MBEDTLS_CAMELLIA_ALT */
/**
- * \brief Initialize CAMELLIA context
+ * \brief Initialize a CAMELLIA context.
*
- * \param ctx CAMELLIA context to be initialized
+ * \param ctx The CAMELLIA context to be initialized.
+ * This must not be \c NULL.
*/
void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
/**
- * \brief Clear CAMELLIA context
+ * \brief Clear a CAMELLIA context.
*
- * \param ctx CAMELLIA context to be cleared
+ * \param ctx The CAMELLIA context to be cleared. This may be \c NULL,
+ * in which case this function returns immediately. If it is not
+ * \c NULL, it must be initialized.
*/
void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
/**
- * \brief CAMELLIA key schedule (encryption)
+ * \brief Perform a CAMELLIA key schedule operation for encryption.
*
- * \param ctx CAMELLIA context to be initialized
- * \param key encryption key
- * \param keybits must be 128, 192 or 256
+ * \param ctx The CAMELLIA context to use. This must be initialized.
+ * \param key The encryption key to use. This must be a readable buffer
+ * of size \p keybits Bits.
+ * \param keybits The length of \p key in Bits. This must be either \c 128,
+ * \c 192 or \c 256.
*
- * \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
-int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key,
- unsigned int keybits );
+int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx,
+ const unsigned char *key,
+ unsigned int keybits );
/**
- * \brief CAMELLIA key schedule (decryption)
+ * \brief Perform a CAMELLIA key schedule operation for decryption.
*
- * \param ctx CAMELLIA context to be initialized
- * \param key decryption key
- * \param keybits must be 128, 192 or 256
+ * \param ctx The CAMELLIA context to use. This must be initialized.
+ * \param key The decryption key. This must be a readable buffer
+ * of size \p keybits Bits.
+ * \param keybits The length of \p key in Bits. This must be either \c 128,
+ * \c 192 or \c 256.
*
- * \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
-int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key,
- unsigned int keybits );
+int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx,
+ const unsigned char *key,
+ unsigned int keybits );
/**
- * \brief CAMELLIA-ECB block encryption/decryption
+ * \brief Perform a CAMELLIA-ECB block encryption/decryption operation.
*
- * \param ctx CAMELLIA context
- * \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
- * \param input 16-byte input block
- * \param output 16-byte output block
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
+ * \param input The input block. This must be a readable buffer
+ * of size \c 16 Bytes.
+ * \param output The output block. This must be a writable buffer
+ * of size \c 16 Bytes.
*
- * \return 0 if successful
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
int mode,
@@ -120,9 +142,7 @@
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
- * \brief CAMELLIA-CBC buffer encryption/decryption
- * Length should be a multiple of the block
- * size (16 bytes)
+ * \brief Perform a CAMELLIA-CBC buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -132,15 +152,22 @@
* IV, you should either save it manually or use the cipher
* module instead.
*
- * \param ctx CAMELLIA context
- * \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
- * \param length length of the input data
- * \param iv initialization vector (updated after use)
- * \param input buffer holding the input data
- * \param output buffer holding the output data
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
+ * \param length The length in Bytes of the input data \p input.
+ * This must be a multiple of \c 16 Bytes.
+ * \param iv The initialization vector. This must be a read/write buffer
+ * of length \c 16 Bytes. It is updated to allow streaming
+ * use as explained above.
+ * \param input The buffer holding the input data. This must point to a
+ * readable buffer of length \p length Bytes.
+ * \param output The buffer holding the output data. This must point to a
+ * writable buffer of length \p length Bytes.
*
- * \return 0 if successful, or
- * MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
int mode,
@@ -152,11 +179,14 @@
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
- * \brief CAMELLIA-CFB128 buffer encryption/decryption
+ * \brief Perform a CAMELLIA-CFB128 buffer encryption/decryption
+ * operation.
*
- * Note: Due to the nature of CFB you should use the same key schedule for
- * both encryption and decryption. So a context initialized with
- * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and CAMELLIE_DECRYPT.
+ * \note Due to the nature of CFB mode, you should use the same
+ * key for both encryption and decryption. In particular, calls
+ * to this function should be preceded by a key-schedule via
+ * mbedtls_camellia_setkey_enc() regardless of whether \p mode
+ * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -166,16 +196,24 @@
* IV, you should either save it manually or use the cipher
* module instead.
*
- * \param ctx CAMELLIA context
- * \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
- * \param length length of the input data
- * \param iv_off offset in IV (updated after use)
- * \param iv initialization vector (updated after use)
- * \param input buffer holding the input data
- * \param output buffer holding the output data
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
+ * \param length The length of the input data \p input. Any value is allowed.
+ * \param iv_off The current offset in the IV. This must be smaller
+ * than \c 16 Bytes. It is updated after this call to allow
+ * the aforementioned streaming usage.
+ * \param iv The initialization vector. This must be a read/write buffer
+ * of length \c 16 Bytes. It is updated after this call to
+ * allow the aforementioned streaming usage.
+ * \param input The buffer holding the input data. This must be a readable
+ * buffer of size \p length Bytes.
+ * \param output The buffer to hold the output data. This must be a writable
+ * buffer of length \p length Bytes.
*
- * \return 0 if successful, or
- * MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
int mode,
@@ -188,11 +226,13 @@
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
- * \brief CAMELLIA-CTR buffer encryption/decryption
+ * \brief Perform a CAMELLIA-CTR buffer encryption/decryption operation.
*
- * Note: Due to the nature of CTR you should use the same key schedule for
- * both encryption and decryption. So a context initialized with
- * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and MBEDTLS_CAMELLIA_DECRYPT.
+ * *note Due to the nature of CTR mode, you should use the same
+ * key for both encryption and decryption. In particular, calls
+ * to this function should be preceded by a key-schedule via
+ * mbedtls_camellia_setkey_enc() regardless of whether \p mode
+ * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \warning You must never reuse a nonce value with the same key. Doing so
* would void the encryption for the two messages encrypted with
@@ -215,41 +255,49 @@
* per-message nonce, handled by yourself, and the second one
* updated by this function internally.
*
- * For example, you might reserve the first 12 bytes for the
- * per-message nonce, and the last 4 bytes for internal use. In that
- * case, before calling this function on a new message you need to
- * set the first 12 bytes of \p nonce_counter to your chosen nonce
- * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p
- * stream_block to be ignored). That way, you can encrypt at most
- * 2**96 messages of up to 2**32 blocks each with the same key.
+ * For example, you might reserve the first \c 12 Bytes for the
+ * per-message nonce, and the last \c 4 Bytes for internal use.
+ * In that case, before calling this function on a new message you
+ * need to set the first \c 12 Bytes of \p nonce_counter to your
+ * chosen nonce value, the last four to \c 0, and \p nc_off to \c 0
+ * (which will cause \p stream_block to be ignored). That way, you
+ * can encrypt at most \c 2**96 messages of up to \c 2**32 blocks
+ * each with the same key.
*
* The per-message nonce (or information sufficient to reconstruct
- * it) needs to be communicated with the ciphertext and must be unique.
- * The recommended way to ensure uniqueness is to use a message
- * counter. An alternative is to generate random nonces, but this
- * limits the number of messages that can be securely encrypted:
- * for example, with 96-bit random nonces, you should not encrypt
- * more than 2**32 messages with the same key.
+ * it) needs to be communicated with the ciphertext and must be
+ * unique. The recommended way to ensure uniqueness is to use a
+ * message counter. An alternative is to generate random nonces,
+ * but this limits the number of messages that can be securely
+ * encrypted: for example, with 96-bit random nonces, you should
+ * not encrypt more than 2**32 messages with the same key.
*
* Note that for both stategies, sizes are measured in blocks and
- * that a CAMELLIA block is 16 bytes.
+ * that a CAMELLIA block is \c 16 Bytes.
*
* \warning Upon return, \p stream_block contains sensitive data. Its
* content must not be written to insecure storage and should be
* securely discarded as soon as it's no longer needed.
*
- * \param ctx CAMELLIA context
- * \param length The length of the data
- * \param nc_off The offset in the current stream_block (for resuming
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param length The length of the input data \p input in Bytes.
+ * Any value is allowed.
+ * \param nc_off The offset in the current \p stream_block (for resuming
* within current cipher stream). The offset pointer to
- * should be 0 at the start of a stream.
- * \param nonce_counter The 128-bit nonce and counter.
- * \param stream_block The saved stream-block for resuming. Is overwritten
- * by the function.
- * \param input The input data stream
- * \param output The output data stream
+ * should be \c 0 at the start of a stream. It is updated
+ * at the end of this call.
+ * \param nonce_counter The 128-bit nonce and counter. This must be a read/write
+ * buffer of length \c 16 Bytes.
+ * \param stream_block The saved stream-block for resuming. This must be a
+ * read/write buffer of length \c 16 Bytes.
+ * \param input The input data stream. This must be a readable buffer of
+ * size \p length Bytes.
+ * \param output The output data stream. This must be a writable buffer
+ * of size \p length Bytes.
*
- * \return 0 if successful
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
size_t length,
diff --git a/include/mbedtls/ccm.h b/include/mbedtls/ccm.h
index dfb1b5e..3f6b8f6 100644
--- a/include/mbedtls/ccm.h
+++ b/include/mbedtls/ccm.h
@@ -57,7 +57,6 @@
/* MBEDTLS_ERR_CCM_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_CCM_HW_ACCEL_FAILED -0x0011 /**< CCM hardware accelerator failed. */
-
#ifdef __cplusplus
extern "C" {
#endif
@@ -85,7 +84,7 @@
* to make references valid, and prepare the context
* for mbedtls_ccm_setkey() or mbedtls_ccm_free().
*
- * \param ctx The CCM context to initialize.
+ * \param ctx The CCM context to initialize. This must not be \c NULL.
*/
void mbedtls_ccm_init( mbedtls_ccm_context *ctx );
@@ -93,9 +92,10 @@
* \brief This function initializes the CCM context set in the
* \p ctx parameter and sets the encryption key.
*
- * \param ctx The CCM context to initialize.
+ * \param ctx The CCM context to initialize. This must be an initialized
+ * context.
* \param cipher The 128-bit block cipher to use.
- * \param key The encryption key.
+ * \param key The encryption key. This must not be \c NULL.
* \param keybits The key size in bits. This must be acceptable by the cipher.
*
* \return \c 0 on success.
@@ -110,7 +110,8 @@
* \brief This function releases and clears the specified CCM context
* and underlying cipher sub-context.
*
- * \param ctx The CCM context to clear.
+ * \param ctx The CCM context to clear. If this is \c NULL, the function
+ * has no effect. Otherwise, this must be initialized.
*/
void mbedtls_ccm_free( mbedtls_ccm_context *ctx );
@@ -123,19 +124,27 @@
* \p tag = \p output + \p length, and make sure that the
* output buffer is at least \p length + \p tag_len wide.
*
- * \param ctx The CCM context to use for encryption.
+ * \param ctx The CCM context to use for encryption. This must be
+ * initialized and bound to a key.
* \param length The length of the input data in Bytes.
- * \param iv Initialization vector (nonce).
+ * \param iv The initialization vector (nonce). This must be a readable
+ * buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
- * \param add The additional data field.
+ * \param add The additional data field. If \p add_len is greater than
+ * zero, \p add must be a readable buffer of at least that
+ * length.
* \param add_len The length of additional data in Bytes.
- * Must be less than 2^16 - 2^8.
- * \param input The buffer holding the input data.
- * \param output The buffer holding the output data.
- * Must be at least \p length Bytes wide.
- * \param tag The buffer holding the authentication field.
+ * This must be less than `2^16 - 2^8`.
+ * \param input The buffer holding the input data. If \p length is greater
+ * than zero, \p input must be a readable buffer of at least
+ * that length.
+ * \param output The buffer holding the output data. If \p length is greater
+ * than zero, \p output must be a writable buffer of at least
+ * that length.
+ * \param tag The buffer holding the authentication field. This must be a
+ * readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication field to generate in Bytes:
* 4, 6, 8, 10, 12, 14 or 16.
*
@@ -161,23 +170,30 @@
* the tag length has to be encoded into the \p iv passed to
* this function.
*
- * \param ctx The CCM context to use for encryption.
+ * \param ctx The CCM context to use for encryption. This must be
+ * initialized and bound to a key.
* \param length The length of the input data in Bytes.
- * \param iv Initialization vector (nonce).
+ * \param iv The initialization vector (nonce). This must be a readable
+ * buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
- * \param add The additional data field.
+ * \param add The additional data field. This must be a readable buffer of
+ * at least \p add_len Bytes.
* \param add_len The length of additional data in Bytes.
- * Must be less than 2^16 - 2^8.
- * \param input The buffer holding the input data.
- * \param output The buffer holding the output data.
- * Must be at least \p length Bytes wide.
- * \param tag The buffer holding the authentication field.
+ * This must be less than 2^16 - 2^8.
+ * \param input The buffer holding the input data. If \p length is greater
+ * than zero, \p input must be a readable buffer of at least
+ * that length.
+ * \param output The buffer holding the output data. If \p length is greater
+ * than zero, \p output must be a writable buffer of at least
+ * that length.
+ * \param tag The buffer holding the authentication field. This must be a
+ * readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication field to generate in Bytes:
* 0, 4, 6, 8, 10, 12, 14 or 16.
*
- * \warning Passing 0 as \p tag_len means that the message is no
+ * \warning Passing \c 0 as \p tag_len means that the message is no
* longer authenticated.
*
* \return \c 0 on success.
@@ -193,20 +209,27 @@
* \brief This function performs a CCM authenticated decryption of a
* buffer.
*
- * \param ctx The CCM context to use for decryption.
+ * \param ctx The CCM context to use for decryption. This must be
+ * initialized and bound to a key.
* \param length The length of the input data in Bytes.
- * \param iv Initialization vector (nonce).
+ * \param iv The initialization vector (nonce). This must be a readable
+ * buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
- * \param add The additional data field.
+ * \param add The additional data field. This must be a readable buffer
+ * of at least that \p add_len Bytes..
* \param add_len The length of additional data in Bytes.
- * Must be less than 2^16 - 2^8.
- * \param input The buffer holding the input data.
- * \param output The buffer holding the output data.
- * Must be at least \p length Bytes wide.
- * \param tag The buffer holding the authentication field.
- * \param tag_len The length of the authentication field in Bytes.
+ * This must be less than 2^16 - 2^8.
+ * \param input The buffer holding the input data. If \p length is greater
+ * than zero, \p input must be a readable buffer of at least
+ * that length.
+ * \param output The buffer holding the output data. If \p length is greater
+ * than zero, \p output must be a writable buffer of at least
+ * that length.
+ * \param tag The buffer holding the authentication field. This must be a
+ * readable buffer of at least \p tag_len Bytes.
+ * \param tag_len The length of the authentication field to generate in Bytes:
* 4, 6, 8, 10, 12, 14 or 16.
*
* \return \c 0 on success. This indicates that the message is authentic.
@@ -228,23 +251,30 @@
* this function as \p tag_len. (\p tag needs to be adjusted
* accordingly.)
*
- * \param ctx The CCM context to use for decryption.
+ * \param ctx The CCM context to use for decryption. This must be
+ * initialized and bound to a key.
* \param length The length of the input data in Bytes.
- * \param iv Initialization vector (nonce).
+ * \param iv The initialization vector (nonce). This must be a readable
+ * buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
- * \param add The additional data field.
+ * \param add The additional data field. This must be a readable buffer of
+ * at least that \p add_len Bytes.
* \param add_len The length of additional data in Bytes.
- * Must be less than 2^16 - 2^8.
- * \param input The buffer holding the input data.
- * \param output The buffer holding the output data.
- * Must be at least \p length Bytes wide.
- * \param tag The buffer holding the authentication field.
+ * This must be less than 2^16 - 2^8.
+ * \param input The buffer holding the input data. If \p length is greater
+ * than zero, \p input must be a readable buffer of at least
+ * that length.
+ * \param output The buffer holding the output data. If \p length is greater
+ * than zero, \p output must be a writable buffer of at least
+ * that length.
+ * \param tag The buffer holding the authentication field. This must be a
+ * readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication field in Bytes.
* 0, 4, 6, 8, 10, 12, 14 or 16.
*
- * \warning Passing 0 as \p tag_len means that the message is no
+ * \warning Passing \c 0 as \p tag_len means that the message is nos
* longer authenticated.
*
* \return \c 0 on success.
diff --git a/include/mbedtls/dhm.h b/include/mbedtls/dhm.h
index 8e2d020..a5452c1 100644
--- a/include/mbedtls/dhm.h
+++ b/include/mbedtls/dhm.h
@@ -127,9 +127,15 @@
void mbedtls_dhm_init( mbedtls_dhm_context *ctx );
/**
- * \brief This function parses the ServerKeyExchange parameters.
+ * \brief This function parses the DHM parameters in a
+ * TLS ServerKeyExchange handshake message
+ * (DHM modulus, generator, and public key).
*
- * \param ctx The DHM context.
+ * \note In a TLS handshake, this is the how the client
+ * sets up its DHM context from the server's public
+ * DHM key material.
+ *
+ * \param ctx The DHM context to use. This must be initialized.
* \param p On input, *p must be the start of the input buffer.
* On output, *p is updated to point to the end of the data
* that has been read. On success, this is the first byte
@@ -143,31 +149,37 @@
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
*/
int mbedtls_dhm_read_params( mbedtls_dhm_context *ctx,
- unsigned char **p,
- const unsigned char *end );
+ unsigned char **p,
+ const unsigned char *end );
/**
- * \brief This function sets up and writes the ServerKeyExchange
- * parameters.
+ * \brief This function generates a DHM key pair and exports its
+ * public part together with the DHM parameters in the format
+ * used in a TLS ServerKeyExchange handshake message.
*
- * \note The destination buffer must be large enough to hold
- * the reduced binary presentation of the modulus, the generator
- * and the public key, each wrapped with a 2-byte length field.
- * It is the responsibility of the caller to ensure that enough
- * space is available. Refer to \c mbedtls_mpi_size to computing
- * the byte-size of an MPI.
- *
- * \note This function assumes that \c ctx->P and \c ctx->G
- * have already been properly set. For that, use
+ * \note This function assumes that the DHM parameters \c ctx->P
+ * and \c ctx->G have already been properly set. For that, use
* mbedtls_dhm_set_group() below in conjunction with
* mbedtls_mpi_read_binary() and mbedtls_mpi_read_string().
*
- * \param ctx The DHM context.
+ * \note In a TLS handshake, this is the how the server generates
+ * and exports its DHM key material.
+ *
+ * \param ctx The DHM context to use. This must be initialized
+ * and have the DHM parameters set. It may or may not
+ * already have imported the peer's public key.
* \param x_size The private key size in Bytes.
- * \param olen The number of characters written.
- * \param output The destination buffer.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param olen The address at which to store the number of Bytes
+ * written on success. This must not be \c NULL.
+ * \param output The destination buffer. This must be a writable buffer of
+ * sufficient size to hold the reduced binary presentation of
+ * the modulus, the generator and the public key, each wrapped
+ * with a 2-byte length field. It is the responsibility of the
+ * caller to ensure that enough space is available. Refer to
+ * mbedtls_mpi_size() to computing the byte-size of an MPI.
+ * \param f_rng The RNG function. Must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL if \p f_rng doesn't need a context parameter.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -180,12 +192,14 @@
/**
* \brief This function sets the prime modulus and generator.
*
- * \note This function can be used to set \p P, \p G
+ * \note This function can be used to set \c ctx->P, \c ctx->G
* in preparation for mbedtls_dhm_make_params().
*
- * \param ctx The DHM context.
- * \param P The MPI holding the DHM prime modulus.
- * \param G The MPI holding the DHM generator.
+ * \param ctx The DHM context to configure. This must be initialized.
+ * \param P The MPI holding the DHM prime modulus. This must be
+ * an initialized MPI.
+ * \param G The MPI holding the DHM generator. This must be an
+ * initialized MPI.
*
* \return \c 0 if successful.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -195,11 +209,17 @@
const mbedtls_mpi *G );
/**
- * \brief This function imports the public value of the peer, G^Y.
+ * \brief This function imports the raw public value of the peer.
*
- * \param ctx The DHM context.
- * \param input The input buffer containing the G^Y value of the peer.
- * \param ilen The size of the input buffer.
+ * \note In a TLS handshake, this is the how the server imports
+ * the Client's public DHM key.
+ *
+ * \param ctx The DHM context to use. This must be initialized and have
+ * its DHM parameters set, e.g. via mbedtls_dhm_set_group().
+ * It may or may not already have generated its own private key.
+ * \param input The input buffer containing the \c G^Y value of the peer.
+ * This must be a readable buffer of size \p ilen Bytes.
+ * \param ilen The size of the input buffer \p input in Bytes.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -208,21 +228,25 @@
const unsigned char *input, size_t ilen );
/**
- * \brief This function creates its own private key, \c X, and
- * exports \c G^X.
+ * \brief This function creates a DHM key pair and exports
+ * the raw public key in big-endian format.
*
* \note The destination buffer is always fully written
* so as to contain a big-endian representation of G^X mod P.
- * If it is larger than ctx->len, it is padded accordingly
+ * If it is larger than \c ctx->len, it is padded accordingly
* with zero-bytes at the beginning.
*
- * \param ctx The DHM context.
+ * \param ctx The DHM context to use. This must be initialized and
+ * have the DHM parameters set. It may or may not already
+ * have imported the peer's public key.
* \param x_size The private key size in Bytes.
- * \param output The destination buffer.
- * \param olen The length of the destination buffer. Must be at least
- * equal to ctx->len (the size of \c P).
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param output The destination buffer. This must be a writable buffer of
+ * size \p olen Bytes.
+ * \param olen The length of the destination buffer. This must be at least
+ * equal to `ctx->len` (the size of \c P).
+ * \param f_rng The RNG function. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL
+ * if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -233,22 +257,27 @@
void *p_rng );
/**
- * \brief This function derives and exports the shared secret
- * \c (G^Y)^X mod \c P.
+ * \brief This function derives and exports the shared secret
+ * \c (G^Y)^X mod \c P.
*
- * \note If \p f_rng is not NULL, it is used to blind the input as
- * a countermeasure against timing attacks. Blinding is used
- * only if our private key \c X is re-used, and not used
- * otherwise. We recommend always passing a non-NULL
- * \p f_rng argument.
+ * \note If \p f_rng is not \c NULL, it is used to blind the input as
+ * a countermeasure against timing attacks. Blinding is used
+ * only if our private key \c X is re-used, and not used
+ * otherwise. We recommend always passing a non-NULL
+ * \p f_rng argument.
*
- * \param ctx The DHM context.
- * \param output The destination buffer.
- * \param output_size The size of the destination buffer. Must be at least
- * the size of ctx->len (the size of \c P).
+ * \param ctx The DHM context to use. This must be initialized
+ * and have its own private key generated and the peer's
+ * public key imported.
+ * \param output The buffer to write the generated shared key to. This
+ * must be a writable buffer of size \p output_size Bytes.
+ * \param output_size The size of the destination buffer. This must be at
+ * least the size of \c ctx->len (the size of \c P).
* \param olen On exit, holds the actual number of Bytes written.
- * \param f_rng The RNG function, for blinding purposes.
- * \param p_rng The RNG context.
+ * \param f_rng The RNG function, for blinding purposes. This may
+ * b \c NULL if blinding isn't needed.
+ * \param p_rng The RNG context. This may be \c NULL if \p f_rng
+ * doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -259,9 +288,12 @@
void *p_rng );
/**
- * \brief This function frees and clears the components of a DHM context.
+ * \brief This function frees and clears the components
+ * of a DHM context.
*
- * \param ctx The DHM context to free and clear.
+ * \param ctx The DHM context to free and clear. This may be \c NULL,
+ * in which case this function is a no-op. If it is not \c NULL,
+ * it must point to an initialized DHM context.
*/
void mbedtls_dhm_free( mbedtls_dhm_context *ctx );
@@ -270,17 +302,19 @@
/**
* \brief This function parses DHM parameters in PEM or DER format.
*
- * \param dhm The DHM context to initialize.
- * \param dhmin The input buffer.
- * \param dhminlen The size of the buffer, including the terminating null
- * Byte for PEM data.
+ * \param dhm The DHM context to import the DHM parameters into.
+ * This must be initialized.
+ * \param dhmin The input buffer. This must be a readable buffer of
+ * length \p dhminlen Bytes.
+ * \param dhminlen The size of the input buffer \p dhmin, including the
+ * terminating \c NULL Byte for PEM data.
*
* \return \c 0 on success.
- * \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error code
- * error code on failure.
+ * \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error
+ * code on failure.
*/
int mbedtls_dhm_parse_dhm( mbedtls_dhm_context *dhm, const unsigned char *dhmin,
- size_t dhminlen );
+ size_t dhminlen );
#if defined(MBEDTLS_FS_IO)
/** \ingroup x509_module */
@@ -288,11 +322,13 @@
* \brief This function loads and parses DHM parameters from a file.
*
* \param dhm The DHM context to load the parameters to.
+ * This must be initialized.
* \param path The filename to read the DHM parameters from.
+ * This must not be \c NULL.
*
* \return \c 0 on success.
- * \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error code
- * error code on failure.
+ * \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX
+ * error code on failure.
*/
int mbedtls_dhm_parse_dhmfile( mbedtls_dhm_context *dhm, const char *path );
#endif /* MBEDTLS_FS_IO */
@@ -353,15 +389,6 @@
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
-#if defined(MBEDTLS_DEPRECATED_WARNING)
-#define MBEDTLS_DEPRECATED __attribute__((deprecated))
-MBEDTLS_DEPRECATED typedef char const * mbedtls_deprecated_constant_t;
-#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) \
- ( (mbedtls_deprecated_constant_t) ( VAL ) )
-#else
-#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) VAL
-#endif /* ! MBEDTLS_DEPRECATED_WARNING */
-
/**
* \warning The origin of the primes in RFC 5114 is not documented and
* their use therefore constitutes a security risk!
diff --git a/include/mbedtls/ecdsa.h b/include/mbedtls/ecdsa.h
index 4057828..40fdab3 100644
--- a/include/mbedtls/ecdsa.h
+++ b/include/mbedtls/ecdsa.h
@@ -118,7 +118,8 @@
* \brief This function computes the ECDSA signature of a
* previously-hashed message.
*
- * \note The deterministic version is usually preferred.
+ * \note The deterministic version implemented in
+ * mbedtls_ecdsa_sign_det() is usually preferred.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated
@@ -128,14 +129,22 @@
*
* \see ecp.h
*
- * \param grp The ECP group.
- * \param r The first output integer.
- * \param s The second output integer.
- * \param d The private signing key.
- * \param buf The message hash.
- * \param blen The length of \p buf.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param grp The context for the elliptic curve to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param r The MPI context in which to store the first part
+ * the signature. This must be initialized.
+ * \param s The MPI context in which to store the second part
+ * the signature. This must be initialized.
+ * \param d The private signing key. This must be initialized.
+ * \param buf The content to be signed. This is usually the hash of
+ * the original data to be signed. This must be a readable
+ * buffer of length \p blen Bytes. It may be \c NULL if
+ * \p blen is zero.
+ * \param blen The length of \p buf in Bytes.
+ * \param f_rng The RNG function. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL if \p f_rng doesn't need a context parameter.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX
@@ -162,21 +171,29 @@
*
* \see ecp.h
*
- * \param grp The ECP group.
- * \param r The first output integer.
- * \param s The second output integer.
- * \param d The private signing key.
- * \param buf The message hash.
- * \param blen The length of \p buf.
- * \param md_alg The MD algorithm used to hash the message.
+ * \param grp The context for the elliptic curve to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param r The MPI context in which to store the first part
+ * the signature. This must be initialized.
+ * \param s The MPI context in which to store the second part
+ * the signature. This must be initialized.
+ * \param d The private signing key. This must be initialized
+ * and setup, for example through mbedtls_ecp_gen_privkey().
+ * \param buf The hashed content to be signed. This must be a readable
+ * buffer of length \p blen Bytes. It may be \c NULL if
+ * \p blen is zero.
+ * \param blen The length of \p buf in Bytes.
+ * \param md_alg The hash algorithm used to hash the original data.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
* error code on failure.
*/
-int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s,
- const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
- mbedtls_md_type_t md_alg );
+int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r,
+ mbedtls_mpi *s, const mbedtls_mpi *d,
+ const unsigned char *buf, size_t blen,
+ mbedtls_md_type_t md_alg );
#endif /* MBEDTLS_ECDSA_DETERMINISTIC */
/**
@@ -191,12 +208,19 @@
*
* \see ecp.h
*
- * \param grp The ECP group.
- * \param buf The message hash.
- * \param blen The length of \p buf.
- * \param Q The public key to use for verification.
+ * \param grp The ECP group to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param buf The hashed content that was signed. This must be a readable
+ * buffer of length \p blen Bytes. It may be \c NULL if
+ * \p blen is zero.
+ * \param blen The length of \p buf in Bytes.
+ * \param Q The public key to use for verification. This must be
+ * initialized and setup.
* \param r The first integer of the signature.
+ * This must be initialized.
* \param s The second integer of the signature.
+ * This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the signature
@@ -205,8 +229,9 @@
* error code on failure for any other reason.
*/
int mbedtls_ecdsa_verify( mbedtls_ecp_group *grp,
- const unsigned char *buf, size_t blen,
- const mbedtls_ecp_point *Q, const mbedtls_mpi *r, const mbedtls_mpi *s);
+ const unsigned char *buf, size_t blen,
+ const mbedtls_ecp_point *Q, const mbedtls_mpi *r,
+ const mbedtls_mpi *s);
/**
* \brief This function computes the ECDSA signature and writes it
@@ -223,11 +248,6 @@
* of the Digital Signature Algorithm (DSA) and Elliptic
* Curve Digital Signature Algorithm (ECDSA)</em>.
*
- * \note The \p sig buffer must be at least twice as large as the
- * size of the curve used, plus 9. For example, 73 Bytes if
- * a 256-bit curve is used. A buffer length of
- * #MBEDTLS_ECDSA_MAX_LEN is always safe.
- *
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
@@ -236,20 +256,32 @@
*
* \see ecp.h
*
- * \param ctx The ECDSA context.
+ * \param ctx The ECDSA context to use. This must be initialized
+ * and have a group and private key bound to it, for example
+ * via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
* \param md_alg The message digest that was used to hash the message.
- * \param hash The message hash.
- * \param hlen The length of the hash.
- * \param sig The buffer that holds the signature.
- * \param slen The length of the signature written.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param hash The message hash to be signed. This must be a readable
+ * buffer of length \p blen Bytes.
+ * \param hlen The length of the hash \p hash in Bytes.
+ * \param sig The buffer to which to write the signature. This must be a
+ * writable buffer of length at least twice as large as the
+ * size of the curve used, plus 9. For example, 73 Bytes if
+ * a 256-bit curve is used. A buffer length of
+ * #MBEDTLS_ECDSA_MAX_LEN is always safe.
+ * \param slen The address at which to store the actual length of
+ * the signature written. Must not be \c NULL.
+ * \param f_rng The RNG function. This must not be \c NULL if
+ * #MBEDTLS_ECDSA_DETERMINISTIC is unset. Otherwise,
+ * it is unused and may be set to \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL if \p f_rng is \c NULL or doesn't use a context.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
* \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
-int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx, mbedtls_md_type_t md_alg,
+int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx,
+ mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hlen,
unsigned char *sig, size_t *slen,
int (*f_rng)(void *, unsigned char *, size_t),
@@ -265,15 +297,28 @@
* but it can return early and restart according to the limit
* set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
- * \param ctx The ECDSA context.
+ * \param ctx The ECDSA context to use. This must be initialized
+ * and have a group and private key bound to it, for example
+ * via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
* \param md_alg The message digest that was used to hash the message.
- * \param hash The message hash.
- * \param hlen The length of the hash.
- * \param sig The buffer that holds the signature.
- * \param slen The length of the signature written.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
- * \param rs_ctx The restart context (NULL disables restart).
+ * \param hash The message hash to be signed. This must be a readable
+ * buffer of length \p blen Bytes.
+ * \param hlen The length of the hash \p hash in Bytes.
+ * \param sig The buffer to which to write the signature. This must be a
+ * writable buffer of length at least twice as large as the
+ * size of the curve used, plus 9. For example, 73 Bytes if
+ * a 256-bit curve is used. A buffer length of
+ * #MBEDTLS_ECDSA_MAX_LEN is always safe.
+ * \param slen The address at which to store the actual length of
+ * the signature written. Must not be \c NULL.
+ * \param f_rng The RNG function. This must not be \c NULL if
+ * #MBEDTLS_ECDSA_DETERMINISTIC is unset. Otherwise,
+ * it is unused and may be set to \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL if \p f_rng is \c NULL or doesn't use a context.
+ * \param rs_ctx The restart context to use. This may be \c NULL to disable
+ * restarting. If it is not \c NULL, it must point to an
+ * initialized restart context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
@@ -309,11 +354,6 @@
* \warning It is not thread-safe to use the same context in
* multiple threads.
*
- * \note The \p sig buffer must be at least twice as large as the
- * size of the curve used, plus 9. For example, 73 Bytes if a
- * 256-bit curve is used. A buffer length of
- * #MBEDTLS_ECDSA_MAX_LEN is always safe.
- *
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
@@ -325,12 +365,20 @@
* \deprecated Superseded by mbedtls_ecdsa_write_signature() in
* Mbed TLS version 2.0 and later.
*
- * \param ctx The ECDSA context.
- * \param hash The message hash.
- * \param hlen The length of the hash.
- * \param sig The buffer that holds the signature.
- * \param slen The length of the signature written.
- * \param md_alg The MD algorithm used to hash the message.
+ * \param ctx The ECDSA context to use. This must be initialized
+ * and have a group and private key bound to it, for example
+ * via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
+ * \param hash The message hash to be signed. This must be a readable
+ * buffer of length \p blen Bytes.
+ * \param hlen The length of the hash \p hash in Bytes.
+ * \param sig The buffer to which to write the signature. This must be a
+ * writable buffer of length at least twice as large as the
+ * size of the curve used, plus 9. For example, 73 Bytes if
+ * a 256-bit curve is used. A buffer length of
+ * #MBEDTLS_ECDSA_MAX_LEN is always safe.
+ * \param slen The address at which to store the actual length of
+ * the signature written. Must not be \c NULL.
+ * \param md_alg The message digest that was used to hash the message.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
@@ -355,11 +403,14 @@
*
* \see ecp.h
*
- * \param ctx The ECDSA context.
- * \param hash The message hash.
- * \param hlen The size of the hash.
- * \param sig The signature to read and verify.
- * \param slen The size of \p sig.
+ * \param ctx The ECDSA context to use. This must be initialized
+ * and have a group and public key bound to it.
+ * \param hash The message hash that was signed. This must be a readable
+ * buffer of length \p size Bytes.
+ * \param hlen The size of the hash \p hash.
+ * \param sig The signature to read and verify. This must be a readable
+ * buffer of length \p slen Bytes.
+ * \param slen The size of \p sig in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid.
@@ -382,12 +433,17 @@
* but it can return early and restart according to the limit
* set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
- * \param ctx The ECDSA context.
- * \param hash The message hash.
- * \param hlen The size of the hash.
- * \param sig The signature to read and verify.
- * \param slen The size of \p sig.
- * \param rs_ctx The restart context (NULL disables restart).
+ * \param ctx The ECDSA context to use. This must be initialized
+ * and have a group and public key bound to it.
+ * \param hash The message hash that was signed. This must be a readable
+ * buffer of length \p size Bytes.
+ * \param hlen The size of the hash \p hash.
+ * \param sig The signature to read and verify. This must be a readable
+ * buffer of length \p slen Bytes.
+ * \param slen The size of \p sig in Bytes.
+ * \param rs_ctx The restart context to use. This may be \c NULL to disable
+ * restarting. If it is not \c NULL, it must point to an
+ * initialized restart context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid.
@@ -409,10 +465,12 @@
* \see ecp.h
*
* \param ctx The ECDSA context to store the keypair in.
+ * This must be initialized.
* \param gid The elliptic curve to use. One of the various
* \c MBEDTLS_ECP_DP_XXX macros depending on configuration.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param f_rng The RNG function to use. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX code on failure.
@@ -421,40 +479,55 @@
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
/**
- * \brief This function sets an ECDSA context from an EC key pair.
+ * \brief This function sets up an ECDSA context from an EC key pair.
*
* \see ecp.h
*
- * \param ctx The ECDSA context to set.
- * \param key The EC key to use.
+ * \param ctx The ECDSA context to setup. This must be initialized.
+ * \param key The EC key to use. This must be initialized and hold
+ * a private-public key pair or a public key. In the former
+ * case, the ECDSA context may be used for signature creation
+ * and verification after this call. In the latter case, it
+ * may be used for signature verification.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX code on failure.
*/
-int mbedtls_ecdsa_from_keypair( mbedtls_ecdsa_context *ctx, const mbedtls_ecp_keypair *key );
+int mbedtls_ecdsa_from_keypair( mbedtls_ecdsa_context *ctx,
+ const mbedtls_ecp_keypair *key );
/**
* \brief This function initializes an ECDSA context.
*
* \param ctx The ECDSA context to initialize.
+ * This must not be \c NULL.
*/
void mbedtls_ecdsa_init( mbedtls_ecdsa_context *ctx );
/**
* \brief This function frees an ECDSA context.
*
- * \param ctx The ECDSA context to free.
+ * \param ctx The ECDSA context to free. This may be \c NULL,
+ * in which case this function does nothing. If it
+ * is not \c NULL, it must be initialized.
*/
void mbedtls_ecdsa_free( mbedtls_ecdsa_context *ctx );
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
- * \brief Initialize a restart context
+ * \brief Initialize a restart context.
+ *
+ * \param ctx The restart context to initialize.
+ * This must not be \c NULL.
*/
void mbedtls_ecdsa_restart_init( mbedtls_ecdsa_restart_ctx *ctx );
/**
- * \brief Free the components of a restart context
+ * \brief Free the components of a restart context.
+ *
+ * \param ctx The restart context to free. This may be \c NULL,
+ * in which case this function does nothing. If it
+ * is not \c NULL, it must be initialized.
*/
void mbedtls_ecdsa_restart_free( mbedtls_ecdsa_restart_ctx *ctx );
#endif /* MBEDTLS_ECP_RESTARTABLE */
diff --git a/include/mbedtls/ecp.h b/include/mbedtls/ecp.h
index 1c37298..de3a343 100644
--- a/include/mbedtls/ecp.h
+++ b/include/mbedtls/ecp.h
@@ -497,24 +497,37 @@
/**
* \brief This function frees the components of an ECP group.
- * \param grp The group to free.
+ *
+ * \param grp The group to free. This may be \c NULL, in which
+ * case this function returns immediately. If it is not
+ * \c NULL, it must point to an initialized ECP group.
*/
void mbedtls_ecp_group_free( mbedtls_ecp_group *grp );
/**
* \brief This function frees the components of a key pair.
- * \param key The key pair to free.
+ *
+ * \param key The key pair to free. This may be \c NULL, in which
+ * case this function returns immediately. If it is not
+ * \c NULL, it must point to an initialized ECP key pair.
*/
void mbedtls_ecp_keypair_free( mbedtls_ecp_keypair *key );
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
- * \brief Initialize a restart context
+ * \brief Initialize a restart context.
+ *
+ * \param ctx The restart context to initialize. This must
+ * not be \c NULL.
*/
void mbedtls_ecp_restart_init( mbedtls_ecp_restart_ctx *ctx );
/**
- * \brief Free the components of a restart context
+ * \brief Free the components of a restart context.
+ *
+ * \param ctx The restart context to free. This may be \c NULL, in which
+ * case this function returns immediately. If it is not
+ * \c NULL, it must point to an initialized restart context.
*/
void mbedtls_ecp_restart_free( mbedtls_ecp_restart_ctx *ctx );
#endif /* MBEDTLS_ECP_RESTARTABLE */
@@ -523,11 +536,12 @@
* \brief This function copies the contents of point \p Q into
* point \p P.
*
- * \param P The destination point.
- * \param Q The source point.
+ * \param P The destination point. This must be initialized.
+ * \param Q The source point. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return Another negative error code for other kinds of failure.
*/
int mbedtls_ecp_copy( mbedtls_ecp_point *P, const mbedtls_ecp_point *Q );
@@ -535,31 +549,35 @@
* \brief This function copies the contents of group \p src into
* group \p dst.
*
- * \param dst The destination group.
- * \param src The source group.
+ * \param dst The destination group. This must be initialized.
+ * \param src The source group. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return Another negative error code on other kinds of failure.
*/
-int mbedtls_ecp_group_copy( mbedtls_ecp_group *dst, const mbedtls_ecp_group *src );
+int mbedtls_ecp_group_copy( mbedtls_ecp_group *dst,
+ const mbedtls_ecp_group *src );
/**
- * \brief This function sets a point to zero.
+ * \brief This function sets a point to the point at infinity.
*
- * \param pt The point to set.
+ * \param pt The point to set. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_set_zero( mbedtls_ecp_point *pt );
/**
- * \brief This function checks if a point is zero.
+ * \brief This function checks if a point is the point at infinity.
*
- * \param pt The point to test.
+ * \param pt The point to test. This must be initialized.
*
* \return \c 1 if the point is zero.
* \return \c 0 if the point is non-zero.
+ * \return A negative error code on failure.
*/
int mbedtls_ecp_is_zero( mbedtls_ecp_point *pt );
@@ -569,8 +587,8 @@
* \note This assumes that the points are normalized. Otherwise,
* they may compare as "not equal" even if they are.
*
- * \param P The first point to compare.
- * \param Q The second point to compare.
+ * \param P The first point to compare. This must be initialized.
+ * \param Q The second point to compare. This must be initialized.
*
* \return \c 0 if the points are equal.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the points are not equal.
@@ -582,7 +600,7 @@
* \brief This function imports a non-zero point from two ASCII
* strings.
*
- * \param P The destination point.
+ * \param P The destination point. This must be initialized.
* \param radix The numeric base of the input.
* \param x The first affine coordinate, as a null-terminated string.
* \param y The second affine coordinate, as a null-terminated string.
@@ -597,15 +615,21 @@
* \brief This function exports a point into unsigned binary data.
*
* \param grp The group to which the point should belong.
- * \param P The point to export.
- * \param format The point format. Should be an \c MBEDTLS_ECP_PF_XXX macro.
- * \param olen The length of the output.
- * \param buf The output buffer.
- * \param buflen The length of the output buffer.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param P The point to export. This must be initialized.
+ * \param format The point format. This must be either
+ * #MBEDTLS_ECP_PF_COMPRESSED or #MBEDTLS_ECP_PF_UNCOMPRESSED.
+ * \param olen The address at which to store the length of
+ * the output in Bytes. This must not be \c NULL.
+ * \param buf The output buffer. This must be a writable buffer
+ * of length \p buflen Bytes.
+ * \param buflen The length of the output buffer \p buf in Bytes.
*
* \return \c 0 on success.
- * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA
- * or #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
+ * \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output buffer
+ * is too small to hold the point.
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_point_write_binary( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *P,
int format, size_t *olen,
@@ -619,19 +643,23 @@
* for that.
*
* \param grp The group to which the point should belong.
- * \param P The point to import.
- * \param buf The input buffer.
- * \param ilen The length of the input.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param P The destination context to import the point to.
+ * This must be initialized.
+ * \param buf The input buffer. This must be a readable buffer
+ * of length \p ilen Bytes.
+ * \param ilen The length of the input buffer \p buf in Bytes.
*
* \return \c 0 on success.
- * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
+ * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the point format
* is not implemented.
- *
*/
-int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp, mbedtls_ecp_point *P,
- const unsigned char *buf, size_t ilen );
+int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp,
+ mbedtls_ecp_point *P,
+ const unsigned char *buf, size_t ilen );
/**
* \brief This function imports a point from a TLS ECPoint record.
@@ -639,7 +667,9 @@
* \note On function return, \p *buf is updated to point immediately
* after the ECPoint record.
*
- * \param grp The ECP group used.
+ * \param grp The ECP group to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
* \param pt The destination point.
* \param buf The address of the pointer to the start of the input buffer.
* \param len The length of the buffer.
@@ -649,99 +679,122 @@
* failure.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
*/
-int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp, mbedtls_ecp_point *pt,
- const unsigned char **buf, size_t len );
+int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp,
+ mbedtls_ecp_point *pt,
+ const unsigned char **buf, size_t len );
/**
- * \brief This function exports a point as a TLS ECPoint record.
+ * \brief This function exports a point as a TLS ECPoint record
+ * defined in RFC 4492, Section 5.4.
*
- * \param grp The ECP group used.
- * \param pt The point format to export to. The point format is an
- * \c MBEDTLS_ECP_PF_XXX constant.
- * \param format The export format.
- * \param olen The length of the data written.
- * \param buf The buffer to write to.
- * \param blen The length of the buffer.
+ * \param grp The ECP group to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param pt The point to be exported. This must be initialized.
+ * \param format The point format to use. This must be either
+ * #MBEDTLS_ECP_PF_COMPRESSED or #MBEDTLS_ECP_PF_UNCOMPRESSED.
+ * \param olen The address at which to store the length in Bytes
+ * of the data written.
+ * \param buf The target buffer. This must be a writable buffer of
+ * length \p blen Bytes.
+ * \param blen The length of the target buffer \p buf in Bytes.
*
* \return \c 0 on success.
- * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA or
- * #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
+ * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid.
+ * \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the target buffer
+ * is too small to hold the exported point.
+ * \return Another negative error code on other kinds of failure.
*/
-int mbedtls_ecp_tls_write_point( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt,
- int format, size_t *olen,
- unsigned char *buf, size_t blen );
+int mbedtls_ecp_tls_write_point( const mbedtls_ecp_group *grp,
+ const mbedtls_ecp_point *pt,
+ int format, size_t *olen,
+ unsigned char *buf, size_t blen );
/**
- * \brief This function sets a group using standardized domain parameters.
+ * \brief This function sets up an ECP group context
+ * from a standardized set of domain parameters.
*
* \note The index should be a value of the NamedCurve enum,
* as defined in <em>RFC-4492: Elliptic Curve Cryptography
* (ECC) Cipher Suites for Transport Layer Security (TLS)</em>,
* usually in the form of an \c MBEDTLS_ECP_DP_XXX macro.
*
- * \param grp The destination group.
+ * \param grp The group context to setup. This must be initialized.
* \param id The identifier of the domain parameter set to load.
*
- * \return \c 0 on success,
- * \return An \c MBEDTLS_ERR_MPI_XXX error code on initialization failure.
- * \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE for unkownn groups.
-
+ * \return \c 0 on success.
+ * \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if \p id doesn't
+ * correspond to a known group.
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_group_load( mbedtls_ecp_group *grp, mbedtls_ecp_group_id id );
/**
- * \brief This function sets a group from a TLS ECParameters record.
+ * \brief This function sets up an ECP group context from a TLS
+ * ECParameters record as defined in RFC 4492, Section 5.4.
*
- * \note \p buf is updated to point right after the ECParameters
- * record on exit.
+ * \note The read pointer \p buf is updated to point right after
+ * the ECParameters record on exit.
*
- * \param grp The destination group.
+ * \param grp The group context to setup. This must be initialized.
* \param buf The address of the pointer to the start of the input buffer.
- * \param len The length of the buffer.
+ * \param len The length of the input buffer \c *buf in Bytes.
*
* \return \c 0 on success.
- * \return An \c MBEDTLS_ERR_MPI_XXX error code on initialization
- * failure.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not
- * recognised.
+ * recognized.
+ * \return Another negative error code on other kinds of failure.
*/
-int mbedtls_ecp_tls_read_group( mbedtls_ecp_group *grp, const unsigned char **buf, size_t len );
+int mbedtls_ecp_tls_read_group( mbedtls_ecp_group *grp,
+ const unsigned char **buf, size_t len );
/**
- * \brief This function reads a group from a TLS ECParameters record.
+ * \brief This function extracts an elliptic curve group ID from a
+ * TLS ECParameters record as defined in RFC 4492, Section 5.4.
*
- * \note \p buf is updated to point right after the ECParameters
- * record on exit.
+ * \note The read pointer \p buf is updated to point right after
+ * the ECParameters record on exit.
*
- * \param grp Output parameter to hold the group id.
+ * \param grp The address at which to store the group id.
+ * This must not be \c NULL.
* \param buf The address of the pointer to the start of the input buffer.
- * \param len The length of the buffer.
+ * \param len The length of the input buffer \c *buf in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not
- * recognised.
+ * recognized.
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_tls_read_group_id( mbedtls_ecp_group_id *grp,
- const unsigned char **buf, size_t len );
+ const unsigned char **buf,
+ size_t len );
/**
- * \brief This function writes the TLS ECParameters record for a group.
+ * \brief This function exports an elliptic curve as a TLS
+ * ECParameters record as defined in RFC 4492, Section 5.4.
*
- * \param grp The ECP group used.
- * \param olen The number of Bytes written.
- * \param buf The buffer to write to.
- * \param blen The length of the buffer.
+ * \param grp The ECP group to be exported.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param olen The address at which to store the number of Bytes written.
+ * This must not be \c NULL.
+ * \param buf The buffer to write to. This must be a writable buffer
+ * of length \p blen Bytes.
+ * \param blen The length of the output buffer \p buf in Bytes.
*
* \return \c 0 on success.
- * \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
+ * \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output
+ * buffer is too small to hold the exported group.
+ * \return Another negative error code on other kinds of failure.
*/
-int mbedtls_ecp_tls_write_group( const mbedtls_ecp_group *grp, size_t *olen,
- unsigned char *buf, size_t blen );
+int mbedtls_ecp_tls_write_group( const mbedtls_ecp_group *grp,
+ size_t *olen,
+ unsigned char *buf, size_t blen );
/**
- * \brief This function performs multiplication of a point by
- * an integer: \p R = \p m * \p P.
+ * \brief This function performs a scalar multiplication of a point
+ * by an integer: \p R = \p m * \p P.
*
* It is not thread-safe to use same group in multiple threads.
*
@@ -755,17 +808,22 @@
* targeting these results. We recommend always providing
* a non-NULL \p f_rng. The overhead is negligible.
*
- * \param grp The ECP group.
- * \param R The destination point.
- * \param m The integer by which to multiply.
- * \param P The point to multiply.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param grp The ECP group to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param R The point in which to store the result of the calculation.
+ * This must be initialized.
+ * \param m The integer by which to multiply. This must be initialized.
+ * \param P The point to multiply. This must be initialized.
+ * \param f_rng The RNG function. This may be \c NULL if randomization
+ * of intermediate results isn't desired (discouraged).
+ * \param p_rng The RNG context to be passed to \p p_rng.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m is not a valid private
* key, or \p P is not a valid public key.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_mul( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
@@ -781,12 +839,16 @@
* it can return early and restart according to the limit set
* with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
- * \param grp The ECP group.
- * \param R The destination point.
- * \param m The integer by which to multiply.
- * \param P The point to multiply.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param grp The ECP group to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param R The point in which to store the result of the calculation.
+ * This must be initialized.
+ * \param m The integer by which to multiply. This must be initialized.
+ * \param P The point to multiply. This must be initialized.
+ * \param f_rng The RNG function. This may be \c NULL if randomization
+ * of intermediate results isn't desired (discouraged).
+ * \param p_rng The RNG context to be passed to \p p_rng.
* \param rs_ctx The restart context (NULL disables restart).
*
* \return \c 0 on success.
@@ -795,6 +857,7 @@
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_mul_restartable( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
@@ -810,18 +873,25 @@
* \note In contrast to mbedtls_ecp_mul(), this function does not
* guarantee a constant execution flow and timing.
*
- * \param grp The ECP group.
- * \param R The destination point.
+ * \param grp The ECP group to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param R The point in which to store the result of the calculation.
+ * This must be initialized.
* \param m The integer by which to multiply \p P.
- * \param P The point to multiply by \p m.
+ * This must be initialized.
+ * \param P The point to multiply by \p m. This must be initialized.
* \param n The integer by which to multiply \p Q.
+ * This must be initialized.
* \param Q The point to be multiplied by \p n.
+ * This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m or \p n are not
* valid private keys, or \p P or \p Q are not valid public
* keys.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
@@ -838,12 +908,18 @@
* but it can return early and restart according to the limit
* set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
- * \param grp The ECP group.
- * \param R The destination point.
+ * \param grp The ECP group to use.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param R The point in which to store the result of the calculation.
+ * This must be initialized.
* \param m The integer by which to multiply \p P.
- * \param P The point to multiply by \p m.
+ * This must be initialized.
+ * \param P The point to multiply by \p m. This must be initialized.
* \param n The integer by which to multiply \p Q.
+ * This must be initialized.
* \param Q The point to be multiplied by \p n.
+ * This must be initialized.
* \param rs_ctx The restart context (NULL disables restart).
*
* \return \c 0 on success.
@@ -853,6 +929,7 @@
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
+ * \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_muladd_restartable(
mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
@@ -877,38 +954,51 @@
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
- * \param grp The curve the point should lie on.
- * \param pt The point to check.
+ * \param grp The ECP group the point should belong to.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param pt The point to check. This must be initialized.
*
* \return \c 0 if the point is a valid public key.
- * \return #MBEDTLS_ERR_ECP_INVALID_KEY on failure.
+ * \return #MBEDTLS_ERR_ECP_INVALID_KEY if the point is not
+ * a valid public key for the given curve.
+ * \return Another negative error code on other kinds of failure.
*/
-int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt );
+int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp,
+ const mbedtls_ecp_point *pt );
/**
- * \brief This function checks that an \p mbedtls_mpi is a valid private
- * key for this curve.
+ * \brief This function checks that an \p mbedtls_mpi is a
+ * valid private key for this curve.
*
* \note This function uses bare components rather than an
* ::mbedtls_ecp_keypair structure to ease use with other
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
- * \param grp The group used.
- * \param d The integer to check.
+ * \param grp The ECP group the private key should belong to.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param d The integer to check. This must be initialized.
*
* \return \c 0 if the point is a valid private key.
- * \return #MBEDTLS_ERR_ECP_INVALID_KEY on failure.
+ * \return #MBEDTLS_ERR_ECP_INVALID_KEY if the point is not a valid
+ * private key for the given curve.
+ * \return Another negative error code on other kinds of failure.
*/
-int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp, const mbedtls_mpi *d );
+int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp,
+ const mbedtls_mpi *d );
/**
* \brief This function generates a private key.
*
- * \param grp The ECP group.
- * \param d The destination MPI (secret part).
- * \param f_rng The RNG function.
- * \param p_rng The RNG parameter.
+ * \param grp The ECP group to generate a private key for.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param d The destination MPI (secret part). This must be initialized.
+ * \param f_rng The RNG function. This must not be \c NULL.
+ * \param p_rng The RNG parameter to be passed to \p f_rng. This may be
+ * \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
@@ -928,22 +1018,29 @@
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
- * \param grp The ECP group.
- * \param G The chosen base point.
+ * \param grp The ECP group to generate a key pair for.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
+ * \param G The base point to use. This must be initialized
+ * and belong to \p grp. It replaces the default base
+ * point \c grp->G used by mbedtls_ecp_gen_keypair().
* \param d The destination MPI (secret part).
+ * This must be initialized.
* \param Q The destination point (public part).
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * This must be initialized.
+ * \param f_rng The RNG function. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may
+ * be \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
* on failure.
*/
int mbedtls_ecp_gen_keypair_base( mbedtls_ecp_group *grp,
- const mbedtls_ecp_point *G,
- mbedtls_mpi *d, mbedtls_ecp_point *Q,
- int (*f_rng)(void *, unsigned char *, size_t),
- void *p_rng );
+ const mbedtls_ecp_point *G,
+ mbedtls_mpi *d, mbedtls_ecp_point *Q,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
/**
* \brief This function generates an ECP keypair.
@@ -953,34 +1050,42 @@
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
- * \param grp The ECP group.
+ * \param grp The ECP group to generate a key pair for.
+ * This must be initialized and have group parameters
+ * set, for example through mbedtls_ecp_group_load().
* \param d The destination MPI (secret part).
+ * This must be initialized.
* \param Q The destination point (public part).
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * This must be initialized.
+ * \param f_rng The RNG function. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may
+ * be \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
* on failure.
*/
-int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
- int (*f_rng)(void *, unsigned char *, size_t),
- void *p_rng );
+int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp, mbedtls_mpi *d,
+ mbedtls_ecp_point *Q,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
/**
* \brief This function generates an ECP key.
*
* \param grp_id The ECP group identifier.
- * \param key The destination key.
- * \param f_rng The RNG function.
- * \param p_rng The RNG context.
+ * \param key The destination key. This must be initialized.
+ * \param f_rng The RNG function to use. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may
+ * be \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
* on failure.
*/
int mbedtls_ecp_gen_key( mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key,
- int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
/**
* \brief This function checks that the keypair objects
@@ -988,16 +1093,19 @@
* same public point, and that the private key in
* \p prv is consistent with the public key.
*
- * \param pub The keypair structure holding the public key.
- * If it contains a private key, that part is ignored.
+ * \param pub The keypair structure holding the public key. This
+ * must be initialized. If it contains a private key, that
+ * part is ignored.
* \param prv The keypair structure holding the full keypair.
+ * This must be initialized.
*
* \return \c 0 on success, meaning that the keys are valid and match.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the keys are invalid or do not match.
* \return An \c MBEDTLS_ERR_ECP_XXX or an \c MBEDTLS_ERR_MPI_XXX
* error code on calculation failure.
*/
-int mbedtls_ecp_check_pub_priv( const mbedtls_ecp_keypair *pub, const mbedtls_ecp_keypair *prv );
+int mbedtls_ecp_check_pub_priv( const mbedtls_ecp_keypair *pub,
+ const mbedtls_ecp_keypair *prv );
#if defined(MBEDTLS_SELF_TEST)
diff --git a/include/mbedtls/gcm.h b/include/mbedtls/gcm.h
index 93d15ee..fccabb0 100644
--- a/include/mbedtls/gcm.h
+++ b/include/mbedtls/gcm.h
@@ -85,7 +85,7 @@
* cipher, nor set the key. For this purpose, use
* mbedtls_gcm_setkey().
*
- * \param ctx The GCM context to initialize.
+ * \param ctx The GCM context to initialize. This must not be \c NULL.
*/
void mbedtls_gcm_init( mbedtls_gcm_context *ctx );
@@ -93,9 +93,10 @@
* \brief This function associates a GCM context with a
* cipher algorithm and a key.
*
- * \param ctx The GCM context to initialize.
+ * \param ctx The GCM context. This must be initialized.
* \param cipher The 128-bit block cipher to use.
- * \param key The encryption key.
+ * \param key The encryption key. This must be a readable buffer of at
+ * least \p keybits bits.
* \param keybits The key size in bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
@@ -122,7 +123,8 @@
* authentic. You should use this function to perform encryption
* only. For decryption, use mbedtls_gcm_auth_decrypt() instead.
*
- * \param ctx The GCM context to use for encryption or decryption.
+ * \param ctx The GCM context to use for encryption or decryption. This
+ * must be initialized.
* \param mode The operation to perform:
* - #MBEDTLS_GCM_ENCRYPT to perform authenticated encryption.
* The ciphertext is written to \p output and the
@@ -136,21 +138,27 @@
* calling this function in decryption mode.
* \param length The length of the input data, which is equal to the length
* of the output data.
- * \param iv The initialization vector.
+ * \param iv The initialization vector. This must be a readable buffer of
+ * at least \p iv_len Bytes.
* \param iv_len The length of the IV.
- * \param add The buffer holding the additional data.
+ * \param add The buffer holding the additional data. This must be of at
+ * least that size in Bytes.
* \param add_len The length of the additional data.
- * \param input The buffer holding the input data. Its size is \b length.
- * \param output The buffer for holding the output data. It must have room
- * for \b length bytes.
+ * \param input The buffer holding the input data. If \p length is greater
+ * than zero, this must be a readable buffer of at least that
+ * size in Bytes.
+ * \param output The buffer for holding the output data. If \p length is greater
+ * than zero, this must be a writable buffer of at least that
+ * size in Bytes.
* \param tag_len The length of the tag to generate.
- * \param tag The buffer for holding the tag.
+ * \param tag The buffer for holding the tag. This must be a readable
+ * buffer of at least \p tag_len Bytes.
*
* \return \c 0 if the encryption or decryption was performed
* successfully. Note that in #MBEDTLS_GCM_DECRYPT mode,
* this does not indicate that the data is authentic.
- * \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid or
- * a cipher-specific error code if the encryption
+ * \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
+ * not valid or a cipher-specific error code if the encryption
* or decryption failed.
*/
int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
@@ -173,23 +181,30 @@
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
- * \param ctx The GCM context.
+ * \param ctx The GCM context. This must be initialized.
* \param length The length of the ciphertext to decrypt, which is also
* the length of the decrypted plaintext.
- * \param iv The initialization vector.
+ * \param iv The initialization vector. This must be a readable buffer
+ * of at least \p iv_len Bytes.
* \param iv_len The length of the IV.
- * \param add The buffer holding the additional data.
+ * \param add The buffer holding the additional data. This must be of at
+ * least that size in Bytes.
* \param add_len The length of the additional data.
- * \param tag The buffer holding the tag to verify.
+ * \param tag The buffer holding the tag to verify. This must be a
+ * readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the tag to verify.
- * \param input The buffer holding the ciphertext. Its size is \b length.
- * \param output The buffer for holding the decrypted plaintext. It must
- * have room for \b length bytes.
+ * \param input The buffer holding the ciphertext. If \p length is greater
+ * than zero, this must be a readable buffer of at least that
+ * size.
+ * \param output The buffer for holding the decrypted plaintext. If \p length
+ * is greater than zero, this must be a writable buffer of at
+ * least that size.
*
* \return \c 0 if successful and authenticated.
* \return #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
- * \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid or
- * a cipher-specific error code if the decryption failed.
+ * \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
+ * not valid or a cipher-specific error code if the decryption
+ * failed.
*/
int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
size_t length,
@@ -206,15 +221,16 @@
* \brief This function starts a GCM encryption or decryption
* operation.
*
- * \param ctx The GCM context.
+ * \param ctx The GCM context. This must be initialized.
* \param mode The operation to perform: #MBEDTLS_GCM_ENCRYPT or
* #MBEDTLS_GCM_DECRYPT.
- * \param iv The initialization vector.
+ * \param iv The initialization vector. This must be a readable buffer of
+ * at least \p iv_len Bytes.
* \param iv_len The length of the IV.
- * \param add The buffer holding the additional data, or NULL
- * if \p add_len is 0.
- * \param add_len The length of the additional data. If 0,
- * \p add is NULL.
+ * \param add The buffer holding the additional data, or \c NULL
+ * if \p add_len is \c 0.
+ * \param add_len The length of the additional data. If \c 0,
+ * \p add may be \c NULL.
*
* \return \c 0 on success.
*/
@@ -237,11 +253,15 @@
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
- * \param ctx The GCM context.
+ * \param ctx The GCM context. This must be initialized.
* \param length The length of the input data. This must be a multiple of
* 16 except in the last call before mbedtls_gcm_finish().
- * \param input The buffer holding the input data.
- * \param output The buffer for holding the output data.
+ * \param input The buffer holding the input data. If \p length is greater
+ * than zero, this must be a readable buffer of at least that
+ * size in Bytes.
+ * \param output The buffer for holding the output data. If \p length is
+ * greater than zero, this must be a writable buffer of at
+ * least that size in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
@@ -258,9 +278,11 @@
* It wraps up the GCM stream, and generates the
* tag. The tag can have a maximum length of 16 Bytes.
*
- * \param ctx The GCM context.
- * \param tag The buffer for holding the tag.
- * \param tag_len The length of the tag to generate. Must be at least four.
+ * \param ctx The GCM context. This must be initialized.
+ * \param tag The buffer for holding the tag. This must be a readable
+ * buffer of at least \p tag_len Bytes.
+ * \param tag_len The length of the tag to generate. This must be at least
+ * four.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
@@ -273,7 +295,8 @@
* \brief This function clears a GCM context and the underlying
* cipher sub-context.
*
- * \param ctx The GCM context to clear.
+ * \param ctx The GCM context to clear. If this is \c NULL, the call has
+ * no effect. Otherwise, this must be initialized.
*/
void mbedtls_gcm_free( mbedtls_gcm_context *ctx );
diff --git a/include/mbedtls/padlock.h b/include/mbedtls/padlock.h
index 677936e..7a5d083 100644
--- a/include/mbedtls/padlock.h
+++ b/include/mbedtls/padlock.h
@@ -3,6 +3,9 @@
*
* \brief VIA PadLock ACE for HW encryption/decryption supported by some
* processors
+ *
+ * \warning These functions are only for internal use by other library
+ * functions; you must not call them directly.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
@@ -57,7 +60,10 @@
#endif
/**
- * \brief PadLock detection routine
+ * \brief Internal PadLock detection routine
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param feature The feature to detect
*
@@ -66,7 +72,10 @@
int mbedtls_padlock_has_support( int feature );
/**
- * \brief PadLock AES-ECB block en(de)cryption
+ * \brief Internal PadLock AES-ECB block en(de)cryption
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
@@ -76,12 +85,15 @@
* \return 0 if success, 1 if operation failed
*/
int mbedtls_padlock_xcryptecb( mbedtls_aes_context *ctx,
- int mode,
- const unsigned char input[16],
- unsigned char output[16] );
+ int mode,
+ const unsigned char input[16],
+ unsigned char output[16] );
/**
- * \brief PadLock AES-CBC buffer en(de)cryption
+ * \brief Internal PadLock AES-CBC buffer en(de)cryption
+ *
+ * \note This function is only for internal use by other library
+ * functions; you must not call it directly.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
@@ -93,11 +105,11 @@
* \return 0 if success, 1 if operation failed
*/
int mbedtls_padlock_xcryptcbc( mbedtls_aes_context *ctx,
- int mode,
- size_t length,
- unsigned char iv[16],
- const unsigned char *input,
- unsigned char *output );
+ int mode,
+ size_t length,
+ unsigned char iv[16],
+ const unsigned char *input,
+ unsigned char *output );
#ifdef __cplusplus
}
diff --git a/include/mbedtls/platform_util.h b/include/mbedtls/platform_util.h
index 8846f45..b0e72ad 100644
--- a/include/mbedtls/platform_util.h
+++ b/include/mbedtls/platform_util.h
@@ -102,6 +102,27 @@
#endif /* MBEDTLS_CHECK_PARAMS */
+/* Internal helper macros for deprecating API constants. */
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#if defined(MBEDTLS_DEPRECATED_WARNING)
+/* Deliberately don't (yet) export MBEDTLS_DEPRECATED here
+ * to avoid conflict with other headers which define and use
+ * it, too. We might want to move all these definitions here at
+ * some point for uniformity. */
+#define MBEDTLS_DEPRECATED __attribute__((deprecated))
+MBEDTLS_DEPRECATED typedef char const * mbedtls_deprecated_string_constant_t;
+#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) \
+ ( (mbedtls_deprecated_string_constant_t) ( VAL ) )
+MBEDTLS_DEPRECATED typedef int mbedtls_deprecated_numeric_constant_t;
+#define MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( VAL ) \
+ ( (mbedtls_deprecated_numeric_constant_t) ( VAL ) )
+#undef MBEDTLS_DEPRECATED
+#else /* MBEDTLS_DEPRECATED_WARNING */
+#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) VAL
+#define MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( VAL ) VAL
+#endif /* MBEDTLS_DEPRECATED_WARNING */
+#endif /* MBEDTLS_DEPRECATED_REMOVED */
+
/**
* \brief Securely zeroize a buffer
*
diff --git a/library/aes.c b/library/aes.c
index cc1e5ce..0543cd7 100644
--- a/library/aes.c
+++ b/library/aes.c
@@ -575,7 +575,6 @@
{
aes_gen_tables();
aes_init_done = 1;
-
}
#endif
@@ -771,6 +770,9 @@
const unsigned char *key1, *key2;
unsigned int key1bits, key2bits;
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( key != NULL );
+
ret = mbedtls_aes_xts_decode_keys( key, keybits, &key1, &key1bits,
&key2, &key2bits );
if( ret != 0 )
@@ -793,6 +795,9 @@
const unsigned char *key1, *key2;
unsigned int key1bits, key2bits;
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( key != NULL );
+
ret = mbedtls_aes_xts_decode_keys( key, keybits, &key1, &key1bits,
&key2, &key2bits );
if( ret != 0 )
@@ -996,10 +1001,16 @@
* AES-ECB block encryption/decryption
*/
int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx,
- int mode,
- const unsigned char input[16],
- unsigned char output[16] )
+ int mode,
+ const unsigned char input[16],
+ unsigned char output[16] )
{
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( input != NULL );
+ AES_VALIDATE_RET( output != NULL );
+ AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
+ mode == MBEDTLS_AES_DECRYPT );
+
#if defined(MBEDTLS_AESNI_C) && defined(MBEDTLS_HAVE_X86_64)
if( mbedtls_aesni_has_support( MBEDTLS_AESNI_AES ) )
return( mbedtls_aesni_crypt_ecb( ctx, mode, input, output ) );
@@ -1037,6 +1048,13 @@
int i;
unsigned char temp[16];
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
+ mode == MBEDTLS_AES_DECRYPT );
+ AES_VALIDATE_RET( iv != NULL );
+ AES_VALIDATE_RET( input != NULL );
+ AES_VALIDATE_RET( output != NULL );
+
if( length % 16 )
return( MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH );
@@ -1162,6 +1180,13 @@
unsigned char prev_tweak[16];
unsigned char tmp[16];
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
+ mode == MBEDTLS_AES_DECRYPT );
+ AES_VALIDATE_RET( data_unit != NULL );
+ AES_VALIDATE_RET( input != NULL );
+ AES_VALIDATE_RET( output != NULL );
+
/* Data units must be at least 16 bytes long. */
if( length < 16 )
return MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH;
@@ -1261,7 +1286,20 @@
unsigned char *output )
{
int c;
- size_t n = *iv_off;
+ size_t n;
+
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
+ mode == MBEDTLS_AES_DECRYPT );
+ AES_VALIDATE_RET( iv_off != NULL );
+ AES_VALIDATE_RET( iv != NULL );
+ AES_VALIDATE_RET( input != NULL );
+ AES_VALIDATE_RET( output != NULL );
+
+ n = *iv_off;
+
+ if( n > 15 )
+ return( MBEDTLS_ERR_AES_BAD_INPUT_DATA );
if( mode == MBEDTLS_AES_DECRYPT )
{
@@ -1299,15 +1337,21 @@
* AES-CFB8 buffer encryption/decryption
*/
int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx,
- int mode,
- size_t length,
- unsigned char iv[16],
- const unsigned char *input,
- unsigned char *output )
+ int mode,
+ size_t length,
+ unsigned char iv[16],
+ const unsigned char *input,
+ unsigned char *output )
{
unsigned char c;
unsigned char ov[17];
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
+ mode == MBEDTLS_AES_DECRYPT );
+ AES_VALIDATE_RET( iv != NULL );
+ AES_VALIDATE_RET( input != NULL );
+ AES_VALIDATE_RET( output != NULL );
while( length-- )
{
memcpy( ov, iv, 16 );
@@ -1340,7 +1384,18 @@
unsigned char *output )
{
int ret = 0;
- size_t n = *iv_off;
+ size_t n;
+
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( iv_off != NULL );
+ AES_VALIDATE_RET( iv != NULL );
+ AES_VALIDATE_RET( input != NULL );
+ AES_VALIDATE_RET( output != NULL );
+
+ n = *iv_off;
+
+ if( n > 15 )
+ return( MBEDTLS_ERR_AES_BAD_INPUT_DATA );
while( length-- )
{
@@ -1375,7 +1430,16 @@
unsigned char *output )
{
int c, i;
- size_t n = *nc_off;
+ size_t n;
+
+ AES_VALIDATE_RET( ctx != NULL );
+ AES_VALIDATE_RET( nc_off != NULL );
+ AES_VALIDATE_RET( nonce_counter != NULL );
+ AES_VALIDATE_RET( stream_block != NULL );
+ AES_VALIDATE_RET( input != NULL );
+ AES_VALIDATE_RET( output != NULL );
+
+ n = *nc_off;
if ( n > 0x0F )
return( MBEDTLS_ERR_AES_BAD_INPUT_DATA );
diff --git a/library/aria.c b/library/aria.c
index ca9e147..aff66d6 100644
--- a/library/aria.c
+++ b/library/aria.c
@@ -55,6 +55,12 @@
#define inline __inline
#endif
+/* Parameter validation macros */
+#define ARIA_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_ARIA_BAD_INPUT_DATA )
+#define ARIA_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
/*
* 32-bit integer manipulation macros (little endian)
*/
@@ -449,9 +455,11 @@
int i;
uint32_t w[4][4], *w2;
+ ARIA_VALIDATE_RET( ctx != NULL );
+ ARIA_VALIDATE_RET( key != NULL );
if( keybits != 128 && keybits != 192 && keybits != 256 )
- return( MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH );
+ return( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA );
/* Copy key to W0 (and potential remainder to W1) */
GET_UINT32_LE( w[0][0], key, 0 );
@@ -503,6 +511,8 @@
const unsigned char *key, unsigned int keybits )
{
int i, j, k, ret;
+ ARIA_VALIDATE_RET( ctx != NULL );
+ ARIA_VALIDATE_RET( key != NULL );
ret = mbedtls_aria_setkey_enc( ctx, key, keybits );
if( ret != 0 )
@@ -539,6 +549,9 @@
int i;
uint32_t a, b, c, d;
+ ARIA_VALIDATE_RET( ctx != NULL );
+ ARIA_VALIDATE_RET( input != NULL );
+ ARIA_VALIDATE_RET( output != NULL );
GET_UINT32_LE( a, input, 0 );
GET_UINT32_LE( b, input, 4 );
@@ -586,6 +599,7 @@
/* Initialize context */
void mbedtls_aria_init( mbedtls_aria_context *ctx )
{
+ ARIA_VALIDATE( ctx != NULL );
memset( ctx, 0, sizeof( mbedtls_aria_context ) );
}
@@ -612,6 +626,13 @@
int i;
unsigned char temp[MBEDTLS_ARIA_BLOCKSIZE];
+ ARIA_VALIDATE_RET( ctx != NULL );
+ ARIA_VALIDATE_RET( mode == MBEDTLS_ARIA_ENCRYPT ||
+ mode == MBEDTLS_ARIA_DECRYPT );
+ ARIA_VALIDATE_RET( length == 0 || input != NULL );
+ ARIA_VALIDATE_RET( length == 0 || output != NULL );
+ ARIA_VALIDATE_RET( iv != NULL );
+
if( length % MBEDTLS_ARIA_BLOCKSIZE )
return( MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH );
@@ -665,7 +686,23 @@
unsigned char *output )
{
unsigned char c;
- size_t n = *iv_off;
+ size_t n;
+
+ ARIA_VALIDATE_RET( ctx != NULL );
+ ARIA_VALIDATE_RET( mode == MBEDTLS_ARIA_ENCRYPT ||
+ mode == MBEDTLS_ARIA_DECRYPT );
+ ARIA_VALIDATE_RET( length == 0 || input != NULL );
+ ARIA_VALIDATE_RET( length == 0 || output != NULL );
+ ARIA_VALIDATE_RET( iv != NULL );
+ ARIA_VALIDATE_RET( iv_off != NULL );
+
+ n = *iv_off;
+
+ /* An overly large value of n can lead to an unlimited
+ * buffer overflow. Therefore, guard against this
+ * outside of parameter validation. */
+ if( n >= MBEDTLS_ARIA_BLOCKSIZE )
+ return( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA );
if( mode == MBEDTLS_ARIA_DECRYPT )
{
@@ -713,7 +750,21 @@
unsigned char *output )
{
int c, i;
- size_t n = *nc_off;
+ size_t n;
+
+ ARIA_VALIDATE_RET( ctx != NULL );
+ ARIA_VALIDATE_RET( length == 0 || input != NULL );
+ ARIA_VALIDATE_RET( length == 0 || output != NULL );
+ ARIA_VALIDATE_RET( nonce_counter != NULL );
+ ARIA_VALIDATE_RET( stream_block != NULL );
+ ARIA_VALIDATE_RET( nc_off != NULL );
+
+ n = *nc_off;
+ /* An overly large value of n can lead to an unlimited
+ * buffer overflow. Therefore, guard against this
+ * outside of parameter validation. */
+ if( n >= MBEDTLS_ARIA_BLOCKSIZE )
+ return( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA );
while( length-- )
{
diff --git a/library/blowfish.c b/library/blowfish.c
index 5b6bb98..cbf9238 100644
--- a/library/blowfish.c
+++ b/library/blowfish.c
@@ -40,6 +40,12 @@
#if !defined(MBEDTLS_BLOWFISH_ALT)
+/* Parameter validation macros */
+#define BLOWFISH_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA )
+#define BLOWFISH_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
/*
* 32-bit integer manipulation macros (big endian)
*/
@@ -153,6 +159,7 @@
void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx )
{
+ BLOWFISH_VALIDATE( ctx != NULL );
memset( ctx, 0, sizeof( mbedtls_blowfish_context ) );
}
@@ -167,16 +174,20 @@
/*
* Blowfish key schedule
*/
-int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
- unsigned int keybits )
+int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx,
+ const unsigned char *key,
+ unsigned int keybits )
{
unsigned int i, j, k;
uint32_t data, datal, datar;
+ BLOWFISH_VALIDATE_RET( ctx != NULL );
+ BLOWFISH_VALIDATE_RET( key != NULL );
- if( keybits < MBEDTLS_BLOWFISH_MIN_KEY_BITS || keybits > MBEDTLS_BLOWFISH_MAX_KEY_BITS ||
- ( keybits % 8 ) )
+ if( keybits < MBEDTLS_BLOWFISH_MIN_KEY_BITS ||
+ keybits > MBEDTLS_BLOWFISH_MAX_KEY_BITS ||
+ keybits % 8 != 0 )
{
- return( MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH );
+ return( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA );
}
keybits >>= 3;
@@ -231,6 +242,11 @@
unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] )
{
uint32_t X0, X1;
+ BLOWFISH_VALIDATE_RET( ctx != NULL );
+ BLOWFISH_VALIDATE_RET( mode == MBEDTLS_BLOWFISH_ENCRYPT ||
+ mode == MBEDTLS_BLOWFISH_DECRYPT );
+ BLOWFISH_VALIDATE_RET( input != NULL );
+ BLOWFISH_VALIDATE_RET( output != NULL );
GET_UINT32_BE( X0, input, 0 );
GET_UINT32_BE( X1, input, 4 );
@@ -263,6 +279,12 @@
{
int i;
unsigned char temp[MBEDTLS_BLOWFISH_BLOCKSIZE];
+ BLOWFISH_VALIDATE_RET( ctx != NULL );
+ BLOWFISH_VALIDATE_RET( mode == MBEDTLS_BLOWFISH_ENCRYPT ||
+ mode == MBEDTLS_BLOWFISH_DECRYPT );
+ BLOWFISH_VALIDATE_RET( iv != NULL );
+ BLOWFISH_VALIDATE_RET( length == 0 || input != NULL );
+ BLOWFISH_VALIDATE_RET( length == 0 || output != NULL );
if( length % MBEDTLS_BLOWFISH_BLOCKSIZE )
return( MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH );
@@ -317,7 +339,19 @@
unsigned char *output )
{
int c;
- size_t n = *iv_off;
+ size_t n;
+
+ BLOWFISH_VALIDATE_RET( ctx != NULL );
+ BLOWFISH_VALIDATE_RET( mode == MBEDTLS_BLOWFISH_ENCRYPT ||
+ mode == MBEDTLS_BLOWFISH_DECRYPT );
+ BLOWFISH_VALIDATE_RET( iv != NULL );
+ BLOWFISH_VALIDATE_RET( iv_off != NULL );
+ BLOWFISH_VALIDATE_RET( length == 0 || input != NULL );
+ BLOWFISH_VALIDATE_RET( length == 0 || output != NULL );
+
+ n = *iv_off;
+ if( n >= 8 )
+ return( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA );
if( mode == MBEDTLS_BLOWFISH_DECRYPT )
{
@@ -365,7 +399,17 @@
unsigned char *output )
{
int c, i;
- size_t n = *nc_off;
+ size_t n;
+ BLOWFISH_VALIDATE_RET( ctx != NULL );
+ BLOWFISH_VALIDATE_RET( nonce_counter != NULL );
+ BLOWFISH_VALIDATE_RET( stream_block != NULL );
+ BLOWFISH_VALIDATE_RET( nc_off != NULL );
+ BLOWFISH_VALIDATE_RET( length == 0 || input != NULL );
+ BLOWFISH_VALIDATE_RET( length == 0 || output != NULL );
+
+ n = *nc_off;
+ if( n >= 8 )
+ return( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA );
while( length-- )
{
diff --git a/library/camellia.c b/library/camellia.c
index 41b7da0..22262b8 100644
--- a/library/camellia.c
+++ b/library/camellia.c
@@ -49,6 +49,12 @@
#if !defined(MBEDTLS_CAMELLIA_ALT)
+/* Parameter validation macros */
+#define CAMELLIA_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA )
+#define CAMELLIA_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
/*
* 32-bit integer manipulation macros (big endian)
*/
@@ -321,6 +327,7 @@
void mbedtls_camellia_init( mbedtls_camellia_context *ctx )
{
+ CAMELLIA_VALIDATE( ctx != NULL );
memset( ctx, 0, sizeof( mbedtls_camellia_context ) );
}
@@ -335,8 +342,9 @@
/*
* Camellia key schedule (encryption)
*/
-int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key,
- unsigned int keybits )
+int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx,
+ const unsigned char *key,
+ unsigned int keybits )
{
int idx;
size_t i;
@@ -346,6 +354,9 @@
uint32_t KC[16];
uint32_t TK[20];
+ CAMELLIA_VALIDATE_RET( ctx != NULL );
+ CAMELLIA_VALIDATE_RET( key != NULL );
+
RK = ctx->rk;
memset( t, 0, 64 );
@@ -356,7 +367,7 @@
case 128: ctx->nr = 3; idx = 0; break;
case 192:
case 256: ctx->nr = 4; idx = 1; break;
- default : return( MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH );
+ default : return( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA );
}
for( i = 0; i < keybits / 8; ++i )
@@ -440,14 +451,17 @@
/*
* Camellia key schedule (decryption)
*/
-int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key,
- unsigned int keybits )
+int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx,
+ const unsigned char *key,
+ unsigned int keybits )
{
int idx, ret;
size_t i;
mbedtls_camellia_context cty;
uint32_t *RK;
uint32_t *SK;
+ CAMELLIA_VALIDATE_RET( ctx != NULL );
+ CAMELLIA_VALIDATE_RET( key != NULL );
mbedtls_camellia_init( &cty );
@@ -495,6 +509,11 @@
{
int NR;
uint32_t *RK, X[4];
+ CAMELLIA_VALIDATE_RET( ctx != NULL );
+ CAMELLIA_VALIDATE_RET( mode == MBEDTLS_CAMELLIA_ENCRYPT ||
+ mode == MBEDTLS_CAMELLIA_DECRYPT );
+ CAMELLIA_VALIDATE_RET( input != NULL );
+ CAMELLIA_VALIDATE_RET( output != NULL );
( (void) mode );
@@ -552,14 +571,20 @@
* Camellia-CBC buffer encryption/decryption
*/
int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
- int mode,
- size_t length,
- unsigned char iv[16],
- const unsigned char *input,
- unsigned char *output )
+ int mode,
+ size_t length,
+ unsigned char iv[16],
+ const unsigned char *input,
+ unsigned char *output )
{
int i;
unsigned char temp[16];
+ CAMELLIA_VALIDATE_RET( ctx != NULL );
+ CAMELLIA_VALIDATE_RET( mode == MBEDTLS_CAMELLIA_ENCRYPT ||
+ mode == MBEDTLS_CAMELLIA_DECRYPT );
+ CAMELLIA_VALIDATE_RET( iv != NULL );
+ CAMELLIA_VALIDATE_RET( length == 0 || input != NULL );
+ CAMELLIA_VALIDATE_RET( length == 0 || output != NULL );
if( length % 16 )
return( MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH );
@@ -614,7 +639,18 @@
unsigned char *output )
{
int c;
- size_t n = *iv_off;
+ size_t n;
+ CAMELLIA_VALIDATE_RET( ctx != NULL );
+ CAMELLIA_VALIDATE_RET( mode == MBEDTLS_CAMELLIA_ENCRYPT ||
+ mode == MBEDTLS_CAMELLIA_DECRYPT );
+ CAMELLIA_VALIDATE_RET( iv != NULL );
+ CAMELLIA_VALIDATE_RET( iv_off != NULL );
+ CAMELLIA_VALIDATE_RET( length == 0 || input != NULL );
+ CAMELLIA_VALIDATE_RET( length == 0 || output != NULL );
+
+ n = *iv_off;
+ if( n >= 16 )
+ return( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA );
if( mode == MBEDTLS_CAMELLIA_DECRYPT )
{
@@ -662,7 +698,17 @@
unsigned char *output )
{
int c, i;
- size_t n = *nc_off;
+ size_t n;
+ CAMELLIA_VALIDATE_RET( ctx != NULL );
+ CAMELLIA_VALIDATE_RET( nonce_counter != NULL );
+ CAMELLIA_VALIDATE_RET( stream_block != NULL );
+ CAMELLIA_VALIDATE_RET( nc_off != NULL );
+ CAMELLIA_VALIDATE_RET( length == 0 || input != NULL );
+ CAMELLIA_VALIDATE_RET( length == 0 || output != NULL );
+
+ n = *nc_off;
+ if( n >= 16 )
+ return( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA );
while( length-- )
{
diff --git a/library/ccm.c b/library/ccm.c
index 90cab8e..01e58b0 100644
--- a/library/ccm.c
+++ b/library/ccm.c
@@ -52,6 +52,11 @@
#if !defined(MBEDTLS_CCM_ALT)
+#define CCM_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_CCM_BAD_INPUT )
+#define CCM_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
#define CCM_ENCRYPT 0
#define CCM_DECRYPT 1
@@ -60,6 +65,7 @@
*/
void mbedtls_ccm_init( mbedtls_ccm_context *ctx )
{
+ CCM_VALIDATE( ctx != NULL );
memset( ctx, 0, sizeof( mbedtls_ccm_context ) );
}
@@ -71,6 +77,9 @@
int ret;
const mbedtls_cipher_info_t *cipher_info;
+ CCM_VALIDATE_RET( ctx != NULL );
+ CCM_VALIDATE_RET( key != NULL );
+
cipher_info = mbedtls_cipher_info_from_values( cipher, keybits, MBEDTLS_MODE_ECB );
if( cipher_info == NULL )
return( MBEDTLS_ERR_CCM_BAD_INPUT );
@@ -97,6 +106,8 @@
*/
void mbedtls_ccm_free( mbedtls_ccm_context *ctx )
{
+ if( ctx == NULL )
+ return;
mbedtls_cipher_free( &ctx->cipher_ctx );
mbedtls_platform_zeroize( ctx, sizeof( mbedtls_ccm_context ) );
}
@@ -310,6 +321,12 @@
const unsigned char *input, unsigned char *output,
unsigned char *tag, size_t tag_len )
{
+ CCM_VALIDATE_RET( ctx != NULL );
+ CCM_VALIDATE_RET( iv != NULL );
+ CCM_VALIDATE_RET( add_len == 0 || add != NULL );
+ CCM_VALIDATE_RET( length == 0 || input != NULL );
+ CCM_VALIDATE_RET( length == 0 || output != NULL );
+ CCM_VALIDATE_RET( tag_len == 0 || tag != NULL );
return( ccm_auth_crypt( ctx, CCM_ENCRYPT, length, iv, iv_len,
add, add_len, input, output, tag, tag_len ) );
}
@@ -320,6 +337,12 @@
const unsigned char *input, unsigned char *output,
unsigned char *tag, size_t tag_len )
{
+ CCM_VALIDATE_RET( ctx != NULL );
+ CCM_VALIDATE_RET( iv != NULL );
+ CCM_VALIDATE_RET( add_len == 0 || add != NULL );
+ CCM_VALIDATE_RET( length == 0 || input != NULL );
+ CCM_VALIDATE_RET( length == 0 || output != NULL );
+ CCM_VALIDATE_RET( tag_len == 0 || tag != NULL );
if( tag_len == 0 )
return( MBEDTLS_ERR_CCM_BAD_INPUT );
@@ -341,6 +364,13 @@
unsigned char i;
int diff;
+ CCM_VALIDATE_RET( ctx != NULL );
+ CCM_VALIDATE_RET( iv != NULL );
+ CCM_VALIDATE_RET( add_len == 0 || add != NULL );
+ CCM_VALIDATE_RET( length == 0 || input != NULL );
+ CCM_VALIDATE_RET( length == 0 || output != NULL );
+ CCM_VALIDATE_RET( tag_len == 0 || tag != NULL );
+
if( ( ret = ccm_auth_crypt( ctx, CCM_DECRYPT, length,
iv, iv_len, add, add_len,
input, output, check_tag, tag_len ) ) != 0 )
@@ -367,6 +397,13 @@
const unsigned char *input, unsigned char *output,
const unsigned char *tag, size_t tag_len )
{
+ CCM_VALIDATE_RET( ctx != NULL );
+ CCM_VALIDATE_RET( iv != NULL );
+ CCM_VALIDATE_RET( add_len == 0 || add != NULL );
+ CCM_VALIDATE_RET( length == 0 || input != NULL );
+ CCM_VALIDATE_RET( length == 0 || output != NULL );
+ CCM_VALIDATE_RET( tag_len == 0 || tag != NULL );
+
if( tag_len == 0 )
return( MBEDTLS_ERR_CCM_BAD_INPUT );
diff --git a/library/dhm.c b/library/dhm.c
index 82cbb0c..ee28572 100644
--- a/library/dhm.c
+++ b/library/dhm.c
@@ -60,6 +60,11 @@
#if !defined(MBEDTLS_DHM_ALT)
+#define DHM_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_DHM_BAD_INPUT_DATA )
+#define DHM_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
/*
* helper to validate the mbedtls_mpi size and import it
*/
@@ -121,6 +126,7 @@
void mbedtls_dhm_init( mbedtls_dhm_context *ctx )
{
+ DHM_VALIDATE( ctx != NULL );
memset( ctx, 0, sizeof( mbedtls_dhm_context ) );
}
@@ -132,6 +138,9 @@
const unsigned char *end )
{
int ret;
+ DHM_VALIDATE_RET( ctx != NULL );
+ DHM_VALIDATE_RET( p != NULL && *p != NULL );
+ DHM_VALIDATE_RET( end != NULL );
if( ( ret = dhm_read_bignum( &ctx->P, p, end ) ) != 0 ||
( ret = dhm_read_bignum( &ctx->G, p, end ) ) != 0 ||
@@ -157,6 +166,10 @@
int ret, count = 0;
size_t n1, n2, n3;
unsigned char *p;
+ DHM_VALIDATE_RET( ctx != NULL );
+ DHM_VALIDATE_RET( output != NULL );
+ DHM_VALIDATE_RET( olen != NULL );
+ DHM_VALIDATE_RET( f_rng != NULL );
if( mbedtls_mpi_cmp_int( &ctx->P, 0 ) == 0 )
return( MBEDTLS_ERR_DHM_BAD_INPUT_DATA );
@@ -227,9 +240,9 @@
const mbedtls_mpi *G )
{
int ret;
-
- if( ctx == NULL || P == NULL || G == NULL )
- return( MBEDTLS_ERR_DHM_BAD_INPUT_DATA );
+ DHM_VALIDATE_RET( ctx != NULL );
+ DHM_VALIDATE_RET( P != NULL );
+ DHM_VALIDATE_RET( G != NULL );
if( ( ret = mbedtls_mpi_copy( &ctx->P, P ) ) != 0 ||
( ret = mbedtls_mpi_copy( &ctx->G, G ) ) != 0 )
@@ -248,8 +261,10 @@
const unsigned char *input, size_t ilen )
{
int ret;
+ DHM_VALIDATE_RET( ctx != NULL );
+ DHM_VALIDATE_RET( input != NULL );
- if( ctx == NULL || ilen < 1 || ilen > ctx->len )
+ if( ilen < 1 || ilen > ctx->len )
return( MBEDTLS_ERR_DHM_BAD_INPUT_DATA );
if( ( ret = mbedtls_mpi_read_binary( &ctx->GY, input, ilen ) ) != 0 )
@@ -267,8 +282,11 @@
void *p_rng )
{
int ret, count = 0;
+ DHM_VALIDATE_RET( ctx != NULL );
+ DHM_VALIDATE_RET( output != NULL );
+ DHM_VALIDATE_RET( f_rng != NULL );
- if( ctx == NULL || olen < 1 || olen > ctx->len )
+ if( olen < 1 || olen > ctx->len )
return( MBEDTLS_ERR_DHM_BAD_INPUT_DATA );
if( mbedtls_mpi_cmp_int( &ctx->P, 0 ) == 0 )
@@ -380,8 +398,11 @@
{
int ret;
mbedtls_mpi GYb;
+ DHM_VALIDATE_RET( ctx != NULL );
+ DHM_VALIDATE_RET( output != NULL );
+ DHM_VALIDATE_RET( olen != NULL );
- if( ctx == NULL || output_size < ctx->len )
+ if( output_size < ctx->len )
return( MBEDTLS_ERR_DHM_BAD_INPUT_DATA );
if( ( ret = dhm_check_range( &ctx->GY, &ctx->P ) ) != 0 )
@@ -428,6 +449,9 @@
*/
void mbedtls_dhm_free( mbedtls_dhm_context *ctx )
{
+ if( ctx == NULL )
+ return;
+
mbedtls_mpi_free( &ctx->pX ); mbedtls_mpi_free( &ctx->Vf );
mbedtls_mpi_free( &ctx->Vi ); mbedtls_mpi_free( &ctx->RP );
mbedtls_mpi_free( &ctx->K ); mbedtls_mpi_free( &ctx->GY );
@@ -449,7 +473,12 @@
unsigned char *p, *end;
#if defined(MBEDTLS_PEM_PARSE_C)
mbedtls_pem_context pem;
+#endif /* MBEDTLS_PEM_PARSE_C */
+ DHM_VALIDATE_RET( dhm != NULL );
+ DHM_VALIDATE_RET( dhmin != NULL );
+
+#if defined(MBEDTLS_PEM_PARSE_C)
mbedtls_pem_init( &pem );
/* Avoid calling mbedtls_pem_read_buffer() on non-null-terminated string */
@@ -596,6 +625,8 @@
int ret;
size_t n;
unsigned char *buf;
+ DHM_VALIDATE_RET( dhm != NULL );
+ DHM_VALIDATE_RET( path != NULL );
if( ( ret = load_file( path, &buf, &n ) ) != 0 )
return( ret );
diff --git a/library/ecdsa.c b/library/ecdsa.c
index a62c14c..1204ef9 100644
--- a/library/ecdsa.c
+++ b/library/ecdsa.c
@@ -50,6 +50,14 @@
#define mbedtls_free free
#endif
+#include "mbedtls/platform_util.h"
+
+/* Parameter validation macros based on platform_util.h */
+#define ECDSA_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_ECP_BAD_INPUT_DATA )
+#define ECDSA_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
#if defined(MBEDTLS_ECP_RESTARTABLE)
/*
@@ -377,6 +385,13 @@
const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
{
+ ECDSA_VALIDATE_RET( grp != NULL );
+ ECDSA_VALIDATE_RET( r != NULL );
+ ECDSA_VALIDATE_RET( s != NULL );
+ ECDSA_VALIDATE_RET( d != NULL );
+ ECDSA_VALIDATE_RET( f_rng != NULL );
+ ECDSA_VALIDATE_RET( buf != NULL || blen == 0 );
+
return( ecdsa_sign_restartable( grp, r, s, d, buf, blen,
f_rng, p_rng, NULL ) );
}
@@ -456,6 +471,12 @@
const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
mbedtls_md_type_t md_alg )
{
+ ECDSA_VALIDATE_RET( grp != NULL );
+ ECDSA_VALIDATE_RET( r != NULL );
+ ECDSA_VALIDATE_RET( s != NULL );
+ ECDSA_VALIDATE_RET( d != NULL );
+ ECDSA_VALIDATE_RET( buf != NULL || blen == 0 );
+
return( ecdsa_sign_det_restartable( grp, r, s, d, buf, blen, md_alg, NULL ) );
}
#endif /* MBEDTLS_ECDSA_DETERMINISTIC */
@@ -574,9 +595,17 @@
* Verify ECDSA signature of hashed message
*/
int mbedtls_ecdsa_verify( mbedtls_ecp_group *grp,
- const unsigned char *buf, size_t blen,
- const mbedtls_ecp_point *Q, const mbedtls_mpi *r, const mbedtls_mpi *s)
+ const unsigned char *buf, size_t blen,
+ const mbedtls_ecp_point *Q,
+ const mbedtls_mpi *r,
+ const mbedtls_mpi *s)
{
+ ECDSA_VALIDATE_RET( grp != NULL );
+ ECDSA_VALIDATE_RET( Q != NULL );
+ ECDSA_VALIDATE_RET( r != NULL );
+ ECDSA_VALIDATE_RET( s != NULL );
+ ECDSA_VALIDATE_RET( buf != NULL || blen == 0 );
+
return( ecdsa_verify_restartable( grp, buf, blen, Q, r, s, NULL ) );
}
#endif /* !MBEDTLS_ECDSA_VERIFY_ALT */
@@ -618,6 +647,10 @@
{
int ret;
mbedtls_mpi r, s;
+ ECDSA_VALIDATE_RET( ctx != NULL );
+ ECDSA_VALIDATE_RET( hash != NULL );
+ ECDSA_VALIDATE_RET( sig != NULL );
+ ECDSA_VALIDATE_RET( slen != NULL );
mbedtls_mpi_init( &r );
mbedtls_mpi_init( &s );
@@ -652,12 +685,17 @@
/*
* Compute and write signature
*/
-int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx, mbedtls_md_type_t md_alg,
- const unsigned char *hash, size_t hlen,
- unsigned char *sig, size_t *slen,
- int (*f_rng)(void *, unsigned char *, size_t),
- void *p_rng )
+int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx,
+ mbedtls_md_type_t md_alg,
+ const unsigned char *hash, size_t hlen,
+ unsigned char *sig, size_t *slen,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng )
{
+ ECDSA_VALIDATE_RET( ctx != NULL );
+ ECDSA_VALIDATE_RET( hash != NULL );
+ ECDSA_VALIDATE_RET( sig != NULL );
+ ECDSA_VALIDATE_RET( slen != NULL );
return( mbedtls_ecdsa_write_signature_restartable(
ctx, md_alg, hash, hlen, sig, slen, f_rng, p_rng, NULL ) );
}
@@ -669,6 +707,10 @@
unsigned char *sig, size_t *slen,
mbedtls_md_type_t md_alg )
{
+ ECDSA_VALIDATE_RET( ctx != NULL );
+ ECDSA_VALIDATE_RET( hash != NULL );
+ ECDSA_VALIDATE_RET( sig != NULL );
+ ECDSA_VALIDATE_RET( slen != NULL );
return( mbedtls_ecdsa_write_signature( ctx, md_alg, hash, hlen, sig, slen,
NULL, NULL ) );
}
@@ -681,6 +723,9 @@
const unsigned char *hash, size_t hlen,
const unsigned char *sig, size_t slen )
{
+ ECDSA_VALIDATE_RET( ctx != NULL );
+ ECDSA_VALIDATE_RET( hash != NULL );
+ ECDSA_VALIDATE_RET( sig != NULL );
return( mbedtls_ecdsa_read_signature_restartable(
ctx, hash, hlen, sig, slen, NULL ) );
}
@@ -698,6 +743,9 @@
const unsigned char *end = sig + slen;
size_t len;
mbedtls_mpi r, s;
+ ECDSA_VALIDATE_RET( ctx != NULL );
+ ECDSA_VALIDATE_RET( hash != NULL );
+ ECDSA_VALIDATE_RET( sig != NULL );
mbedtls_mpi_init( &r );
mbedtls_mpi_init( &s );
@@ -752,6 +800,9 @@
int mbedtls_ecdsa_genkey( mbedtls_ecdsa_context *ctx, mbedtls_ecp_group_id gid,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
{
+ ECDSA_VALIDATE_RET( ctx != NULL );
+ ECDSA_VALIDATE_RET( f_rng != NULL );
+
return( mbedtls_ecp_group_load( &ctx->grp, gid ) ||
mbedtls_ecp_gen_keypair( &ctx->grp, &ctx->d, &ctx->Q, f_rng, p_rng ) );
}
@@ -763,6 +814,8 @@
int mbedtls_ecdsa_from_keypair( mbedtls_ecdsa_context *ctx, const mbedtls_ecp_keypair *key )
{
int ret;
+ ECDSA_VALIDATE_RET( ctx != NULL );
+ ECDSA_VALIDATE_RET( key != NULL );
if( ( ret = mbedtls_ecp_group_copy( &ctx->grp, &key->grp ) ) != 0 ||
( ret = mbedtls_mpi_copy( &ctx->d, &key->d ) ) != 0 ||
@@ -779,6 +832,8 @@
*/
void mbedtls_ecdsa_init( mbedtls_ecdsa_context *ctx )
{
+ ECDSA_VALIDATE( ctx != NULL );
+
mbedtls_ecp_keypair_init( ctx );
}
@@ -787,6 +842,9 @@
*/
void mbedtls_ecdsa_free( mbedtls_ecdsa_context *ctx )
{
+ if( ctx == NULL )
+ return;
+
mbedtls_ecp_keypair_free( ctx );
}
@@ -796,6 +854,8 @@
*/
void mbedtls_ecdsa_restart_init( mbedtls_ecdsa_restart_ctx *ctx )
{
+ ECDSA_VALIDATE( ctx != NULL );
+
mbedtls_ecp_restart_init( &ctx->ecp );
ctx->ver = NULL;
@@ -810,6 +870,9 @@
*/
void mbedtls_ecdsa_restart_free( mbedtls_ecdsa_restart_ctx *ctx )
{
+ if( ctx == NULL )
+ return;
+
mbedtls_ecp_restart_free( &ctx->ecp );
ecdsa_restart_ver_free( ctx->ver );
diff --git a/library/ecp.c b/library/ecp.c
index 7fefb4c..ecea591 100644
--- a/library/ecp.c
+++ b/library/ecp.c
@@ -86,6 +86,12 @@
#if !defined(MBEDTLS_ECP_ALT)
+/* Parameter validation macros based on platform_util.h */
+#define ECP_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_ECP_BAD_INPUT_DATA )
+#define ECP_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
#if defined(MBEDTLS_PLATFORM_C)
#include "mbedtls/platform.h"
#else
@@ -238,6 +244,7 @@
*/
void mbedtls_ecp_restart_init( mbedtls_ecp_restart_ctx *ctx )
{
+ ECP_VALIDATE( ctx != NULL );
ctx->ops_done = 0;
ctx->depth = 0;
ctx->rsm = NULL;
@@ -268,6 +275,8 @@
mbedtls_ecp_restart_ctx *rs_ctx,
unsigned ops )
{
+ ECP_VALIDATE_RET( grp != NULL );
+
if( rs_ctx != NULL && ecp_max_ops != 0 )
{
/* scale depending on curve size: the chosen reference is 256-bit,
@@ -496,6 +505,9 @@
{
const mbedtls_ecp_curve_info *curve_info;
+ if( name == NULL )
+ return( NULL );
+
for( curve_info = mbedtls_ecp_curve_list();
curve_info->grp_id != MBEDTLS_ECP_DP_NONE;
curve_info++ )
@@ -526,8 +538,7 @@
*/
void mbedtls_ecp_point_init( mbedtls_ecp_point *pt )
{
- if( pt == NULL )
- return;
+ ECP_VALIDATE( pt != NULL );
mbedtls_mpi_init( &pt->X );
mbedtls_mpi_init( &pt->Y );
@@ -539,8 +550,7 @@
*/
void mbedtls_ecp_group_init( mbedtls_ecp_group *grp )
{
- if( grp == NULL )
- return;
+ ECP_VALIDATE( grp != NULL );
grp->id = MBEDTLS_ECP_DP_NONE;
mbedtls_mpi_init( &grp->P );
@@ -564,8 +574,7 @@
*/
void mbedtls_ecp_keypair_init( mbedtls_ecp_keypair *key )
{
- if( key == NULL )
- return;
+ ECP_VALIDATE( key != NULL );
mbedtls_ecp_group_init( &key->grp );
mbedtls_mpi_init( &key->d );
@@ -633,6 +642,8 @@
int mbedtls_ecp_copy( mbedtls_ecp_point *P, const mbedtls_ecp_point *Q )
{
int ret;
+ ECP_VALIDATE_RET( P != NULL );
+ ECP_VALIDATE_RET( Q != NULL );
MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &P->X, &Q->X ) );
MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &P->Y, &Q->Y ) );
@@ -647,7 +658,10 @@
*/
int mbedtls_ecp_group_copy( mbedtls_ecp_group *dst, const mbedtls_ecp_group *src )
{
- return mbedtls_ecp_group_load( dst, src->id );
+ ECP_VALIDATE_RET( dst != NULL );
+ ECP_VALIDATE_RET( src != NULL );
+
+ return( mbedtls_ecp_group_load( dst, src->id ) );
}
/*
@@ -656,6 +670,7 @@
int mbedtls_ecp_set_zero( mbedtls_ecp_point *pt )
{
int ret;
+ ECP_VALIDATE_RET( pt != NULL );
MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &pt->X , 1 ) );
MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &pt->Y , 1 ) );
@@ -670,6 +685,8 @@
*/
int mbedtls_ecp_is_zero( mbedtls_ecp_point *pt )
{
+ ECP_VALIDATE_RET( pt != NULL );
+
return( mbedtls_mpi_cmp_int( &pt->Z, 0 ) == 0 );
}
@@ -679,6 +696,9 @@
int mbedtls_ecp_point_cmp( const mbedtls_ecp_point *P,
const mbedtls_ecp_point *Q )
{
+ ECP_VALIDATE_RET( P != NULL );
+ ECP_VALIDATE_RET( Q != NULL );
+
if( mbedtls_mpi_cmp_mpi( &P->X, &Q->X ) == 0 &&
mbedtls_mpi_cmp_mpi( &P->Y, &Q->Y ) == 0 &&
mbedtls_mpi_cmp_mpi( &P->Z, &Q->Z ) == 0 )
@@ -696,6 +716,9 @@
const char *x, const char *y )
{
int ret;
+ ECP_VALIDATE_RET( P != NULL );
+ ECP_VALIDATE_RET( x != NULL );
+ ECP_VALIDATE_RET( y != NULL );
MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &P->X, radix, x ) );
MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &P->Y, radix, y ) );
@@ -708,16 +731,19 @@
/*
* Export a point into unsigned binary data (SEC1 2.3.3)
*/
-int mbedtls_ecp_point_write_binary( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *P,
- int format, size_t *olen,
- unsigned char *buf, size_t buflen )
+int mbedtls_ecp_point_write_binary( const mbedtls_ecp_group *grp,
+ const mbedtls_ecp_point *P,
+ int format, size_t *olen,
+ unsigned char *buf, size_t buflen )
{
int ret = 0;
size_t plen;
-
- if( format != MBEDTLS_ECP_PF_UNCOMPRESSED &&
- format != MBEDTLS_ECP_PF_COMPRESSED )
- return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( P != NULL );
+ ECP_VALIDATE_RET( olen != NULL );
+ ECP_VALIDATE_RET( buf != NULL );
+ ECP_VALIDATE_RET( format == MBEDTLS_ECP_PF_UNCOMPRESSED ||
+ format == MBEDTLS_ECP_PF_COMPRESSED );
/*
* Common case: P == 0
@@ -764,11 +790,15 @@
/*
* Import a point from unsigned binary data (SEC1 2.3.4)
*/
-int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp, mbedtls_ecp_point *pt,
- const unsigned char *buf, size_t ilen )
+int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp,
+ mbedtls_ecp_point *pt,
+ const unsigned char *buf, size_t ilen )
{
int ret;
size_t plen;
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( pt != NULL );
+ ECP_VALIDATE_RET( buf != NULL );
if( ilen < 1 )
return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
@@ -803,11 +833,16 @@
* opaque point <1..2^8-1>;
* } ECPoint;
*/
-int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp, mbedtls_ecp_point *pt,
- const unsigned char **buf, size_t buf_len )
+int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp,
+ mbedtls_ecp_point *pt,
+ const unsigned char **buf, size_t buf_len )
{
unsigned char data_len;
const unsigned char *buf_start;
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( pt != NULL );
+ ECP_VALIDATE_RET( buf != NULL );
+ ECP_VALIDATE_RET( *buf != NULL );
/*
* We must have at least two bytes (1 for length, at least one for data)
@@ -825,7 +860,7 @@
buf_start = *buf;
*buf += data_len;
- return mbedtls_ecp_point_read_binary( grp, pt, buf_start, data_len );
+ return( mbedtls_ecp_point_read_binary( grp, pt, buf_start, data_len ) );
}
/*
@@ -839,6 +874,12 @@
unsigned char *buf, size_t blen )
{
int ret;
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( pt != NULL );
+ ECP_VALIDATE_RET( olen != NULL );
+ ECP_VALIDATE_RET( buf != NULL );
+ ECP_VALIDATE_RET( format == MBEDTLS_ECP_PF_UNCOMPRESSED ||
+ format == MBEDTLS_ECP_PF_COMPRESSED );
/*
* buffer length must be at least one, for our length byte
@@ -867,11 +908,14 @@
{
int ret;
mbedtls_ecp_group_id grp_id;
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( buf != NULL );
+ ECP_VALIDATE_RET( *buf != NULL );
if( ( ret = mbedtls_ecp_tls_read_group_id( &grp_id, buf, len ) ) != 0 )
return( ret );
- return mbedtls_ecp_group_load( grp, grp_id );
+ return( mbedtls_ecp_group_load( grp, grp_id ) );
}
/*
@@ -883,6 +927,9 @@
{
uint16_t tls_id;
const mbedtls_ecp_curve_info *curve_info;
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( buf != NULL );
+ ECP_VALIDATE_RET( *buf != NULL );
/*
* We expect at least three bytes (see below)
@@ -918,6 +965,9 @@
unsigned char *buf, size_t blen )
{
const mbedtls_ecp_curve_info *curve_info;
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( buf != NULL );
+ ECP_VALIDATE_RET( olen != NULL );
if( ( curve_info = mbedtls_ecp_curve_info_from_grp_id( grp->id ) ) == NULL )
return( MBEDTLS_ERR_ECP_BAD_INPUT_DATA );
@@ -2276,6 +2326,10 @@
#if defined(MBEDTLS_ECP_INTERNAL_ALT)
char is_grp_capable = 0;
#endif
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( R != NULL );
+ ECP_VALIDATE_RET( m != NULL );
+ ECP_VALIDATE_RET( P != NULL );
#if defined(MBEDTLS_ECP_RESTARTABLE)
/* reset ops count for this call if top-level */
@@ -2333,6 +2387,10 @@
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
{
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( R != NULL );
+ ECP_VALIDATE_RET( m != NULL );
+ ECP_VALIDATE_RET( P != NULL );
return( mbedtls_ecp_mul_restartable( grp, R, m, P, f_rng, p_rng, NULL ) );
}
@@ -2435,6 +2493,12 @@
#if defined(MBEDTLS_ECP_INTERNAL_ALT)
char is_grp_capable = 0;
#endif
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( R != NULL );
+ ECP_VALIDATE_RET( m != NULL );
+ ECP_VALIDATE_RET( P != NULL );
+ ECP_VALIDATE_RET( n != NULL );
+ ECP_VALIDATE_RET( Q != NULL );
if( ecp_get_type( grp ) != ECP_TYPE_SHORT_WEIERSTRASS )
return( MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE );
@@ -2517,6 +2581,12 @@
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
const mbedtls_mpi *n, const mbedtls_ecp_point *Q )
{
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( R != NULL );
+ ECP_VALIDATE_RET( m != NULL );
+ ECP_VALIDATE_RET( P != NULL );
+ ECP_VALIDATE_RET( n != NULL );
+ ECP_VALIDATE_RET( Q != NULL );
return( mbedtls_ecp_muladd_restartable( grp, R, m, P, n, Q, NULL ) );
}
@@ -2539,8 +2609,12 @@
/*
* Check that a point is valid as a public key
*/
-int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt )
+int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp,
+ const mbedtls_ecp_point *pt )
{
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( pt != NULL );
+
/* Must use affine coordinates */
if( mbedtls_mpi_cmp_int( &pt->Z, 1 ) != 0 )
return( MBEDTLS_ERR_ECP_INVALID_KEY );
@@ -2559,8 +2633,12 @@
/*
* Check that an mbedtls_mpi is valid as a private key
*/
-int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp, const mbedtls_mpi *d )
+int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp,
+ const mbedtls_mpi *d )
{
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( d != NULL );
+
#if defined(ECP_MONTGOMERY)
if( ecp_get_type( grp ) == ECP_TYPE_MONTGOMERY )
{
@@ -2601,7 +2679,13 @@
void *p_rng )
{
int ret = MBEDTLS_ERR_ECP_BAD_INPUT_DATA;
- size_t n_size = ( grp->nbits + 7 ) / 8;
+ size_t n_size;
+
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( d != NULL );
+ ECP_VALIDATE_RET( f_rng != NULL );
+
+ n_size = ( grp->nbits + 7 ) / 8;
#if defined(ECP_MONTGOMERY)
if( ecp_get_type( grp ) == ECP_TYPE_MONTGOMERY )
@@ -2680,6 +2764,11 @@
void *p_rng )
{
int ret;
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( d != NULL );
+ ECP_VALIDATE_RET( G != NULL );
+ ECP_VALIDATE_RET( Q != NULL );
+ ECP_VALIDATE_RET( f_rng != NULL );
MBEDTLS_MPI_CHK( mbedtls_ecp_gen_privkey( grp, d, f_rng, p_rng ) );
MBEDTLS_MPI_CHK( mbedtls_ecp_mul( grp, Q, d, G, f_rng, p_rng ) );
@@ -2696,6 +2785,11 @@
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng )
{
+ ECP_VALIDATE_RET( grp != NULL );
+ ECP_VALIDATE_RET( d != NULL );
+ ECP_VALIDATE_RET( Q != NULL );
+ ECP_VALIDATE_RET( f_rng != NULL );
+
return( mbedtls_ecp_gen_keypair_base( grp, &grp->G, d, Q, f_rng, p_rng ) );
}
@@ -2706,6 +2800,8 @@
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
{
int ret;
+ ECP_VALIDATE_RET( key != NULL );
+ ECP_VALIDATE_RET( f_rng != NULL );
if( ( ret = mbedtls_ecp_group_load( &key->grp, grp_id ) ) != 0 )
return( ret );
@@ -2721,6 +2817,8 @@
int ret;
mbedtls_ecp_point Q;
mbedtls_ecp_group grp;
+ ECP_VALIDATE_RET( pub != NULL );
+ ECP_VALIDATE_RET( prv != NULL );
if( pub->grp.id == MBEDTLS_ECP_DP_NONE ||
pub->grp.id != prv->grp.id ||
diff --git a/library/ecp_curves.c b/library/ecp_curves.c
index 68e2441..731621d 100644
--- a/library/ecp_curves.c
+++ b/library/ecp_curves.c
@@ -28,11 +28,18 @@
#if defined(MBEDTLS_ECP_C)
#include "mbedtls/ecp.h"
+#include "mbedtls/platform_util.h"
#include <string.h>
#if !defined(MBEDTLS_ECP_ALT)
+/* Parameter validation macros based on platform_util.h */
+#define ECP_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_ECP_BAD_INPUT_DATA )
+#define ECP_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
!defined(inline) && !defined(__cplusplus)
#define inline __inline
@@ -746,6 +753,7 @@
*/
int mbedtls_ecp_group_load( mbedtls_ecp_group *grp, mbedtls_ecp_group_id id )
{
+ ECP_VALIDATE_RET( grp != NULL );
mbedtls_ecp_group_free( grp );
grp->id = id;
diff --git a/library/error.c b/library/error.c
index eabee9e..3be4175 100644
--- a/library/error.c
+++ b/library/error.c
@@ -618,8 +618,8 @@
#endif /* MBEDTLS_ARC4_C */
#if defined(MBEDTLS_ARIA_C)
- if( use_ret == -(MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH) )
- mbedtls_snprintf( buf, buflen, "ARIA - Invalid key length" );
+ if( use_ret == -(MBEDTLS_ERR_ARIA_BAD_INPUT_DATA) )
+ mbedtls_snprintf( buf, buflen, "ARIA - Bad input data" );
if( use_ret == -(MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH) )
mbedtls_snprintf( buf, buflen, "ARIA - Invalid data input length" );
if( use_ret == -(MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE) )
@@ -672,17 +672,17 @@
#endif /* MBEDTLS_BIGNUM_C */
#if defined(MBEDTLS_BLOWFISH_C)
- if( use_ret == -(MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH) )
- mbedtls_snprintf( buf, buflen, "BLOWFISH - Invalid key length" );
- if( use_ret == -(MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED) )
- mbedtls_snprintf( buf, buflen, "BLOWFISH - Blowfish hardware accelerator failed" );
+ if( use_ret == -(MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA) )
+ mbedtls_snprintf( buf, buflen, "BLOWFISH - Bad input data" );
if( use_ret == -(MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH) )
mbedtls_snprintf( buf, buflen, "BLOWFISH - Invalid data input length" );
+ if( use_ret == -(MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED) )
+ mbedtls_snprintf( buf, buflen, "BLOWFISH - Blowfish hardware accelerator failed" );
#endif /* MBEDTLS_BLOWFISH_C */
#if defined(MBEDTLS_CAMELLIA_C)
- if( use_ret == -(MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH) )
- mbedtls_snprintf( buf, buflen, "CAMELLIA - Invalid key length" );
+ if( use_ret == -(MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA) )
+ mbedtls_snprintf( buf, buflen, "CAMELLIA - Bad input data" );
if( use_ret == -(MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH) )
mbedtls_snprintf( buf, buflen, "CAMELLIA - Invalid data input length" );
if( use_ret == -(MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED) )
diff --git a/library/gcm.c b/library/gcm.c
index c486ef7..675926a 100644
--- a/library/gcm.c
+++ b/library/gcm.c
@@ -57,6 +57,12 @@
#if !defined(MBEDTLS_GCM_ALT)
+/* Parameter validation macros */
+#define GCM_VALIDATE_RET( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_GCM_BAD_INPUT )
+#define GCM_VALIDATE( cond ) \
+ MBEDTLS_INTERNAL_VALIDATE( cond )
+
/*
* 32-bit integer manipulation macros (big endian)
*/
@@ -85,6 +91,7 @@
*/
void mbedtls_gcm_init( mbedtls_gcm_context *ctx )
{
+ GCM_VALIDATE( ctx != NULL );
memset( ctx, 0, sizeof( mbedtls_gcm_context ) );
}
@@ -164,6 +171,10 @@
int ret;
const mbedtls_cipher_info_t *cipher_info;
+ GCM_VALIDATE_RET( ctx != NULL );
+ GCM_VALIDATE_RET( key != NULL );
+ GCM_VALIDATE_RET( keybits == 128 || keybits == 192 || keybits == 256 );
+
cipher_info = mbedtls_cipher_info_from_values( cipher, keybits, MBEDTLS_MODE_ECB );
if( cipher_info == NULL )
return( MBEDTLS_ERR_GCM_BAD_INPUT );
@@ -274,6 +285,10 @@
const unsigned char *p;
size_t use_len, olen = 0;
+ GCM_VALIDATE_RET( ctx != NULL );
+ GCM_VALIDATE_RET( iv != NULL );
+ GCM_VALIDATE_RET( add_len == 0 || add != NULL );
+
/* IV and AD are limited to 2^64 bits, so 2^61 bytes */
/* IV is not allowed to be zero length */
if( iv_len == 0 ||
@@ -356,6 +371,10 @@
unsigned char *out_p = output;
size_t use_len, olen = 0;
+ GCM_VALIDATE_RET( ctx != NULL );
+ GCM_VALIDATE_RET( length == 0 || input != NULL );
+ GCM_VALIDATE_RET( length == 0 || output != NULL );
+
if( output > input && (size_t) ( output - input ) < length )
return( MBEDTLS_ERR_GCM_BAD_INPUT );
@@ -409,8 +428,14 @@
{
unsigned char work_buf[16];
size_t i;
- uint64_t orig_len = ctx->len * 8;
- uint64_t orig_add_len = ctx->add_len * 8;
+ uint64_t orig_len;
+ uint64_t orig_add_len;
+
+ GCM_VALIDATE_RET( ctx != NULL );
+ GCM_VALIDATE_RET( tag != NULL );
+
+ orig_len = ctx->len * 8;
+ orig_add_len = ctx->add_len * 8;
if( tag_len > 16 || tag_len < 4 )
return( MBEDTLS_ERR_GCM_BAD_INPUT );
@@ -452,6 +477,13 @@
{
int ret;
+ GCM_VALIDATE_RET( ctx != NULL );
+ GCM_VALIDATE_RET( iv != NULL );
+ GCM_VALIDATE_RET( add_len == 0 || add != NULL );
+ GCM_VALIDATE_RET( length == 0 || input != NULL );
+ GCM_VALIDATE_RET( length == 0 || output != NULL );
+ GCM_VALIDATE_RET( tag != NULL );
+
if( ( ret = mbedtls_gcm_starts( ctx, mode, iv, iv_len, add, add_len ) ) != 0 )
return( ret );
@@ -480,6 +512,13 @@
size_t i;
int diff;
+ GCM_VALIDATE_RET( ctx != NULL );
+ GCM_VALIDATE_RET( iv != NULL );
+ GCM_VALIDATE_RET( add_len == 0 || add != NULL );
+ GCM_VALIDATE_RET( tag != NULL );
+ GCM_VALIDATE_RET( length == 0 || input != NULL );
+ GCM_VALIDATE_RET( length == 0 || output != NULL );
+
if( ( ret = mbedtls_gcm_crypt_and_tag( ctx, MBEDTLS_GCM_DECRYPT, length,
iv, iv_len, add, add_len,
input, output, tag_len, check_tag ) ) != 0 )
@@ -502,6 +541,8 @@
void mbedtls_gcm_free( mbedtls_gcm_context *ctx )
{
+ if( ctx == NULL )
+ return;
mbedtls_cipher_free( &ctx->cipher_ctx );
mbedtls_platform_zeroize( ctx, sizeof( mbedtls_gcm_context ) );
}
diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt
index 58126be..9e15249 100644
--- a/tests/CMakeLists.txt
+++ b/tests/CMakeLists.txt
@@ -92,6 +92,7 @@
add_test_suite(gcm gcm.aes192_de)
add_test_suite(gcm gcm.aes256_de)
add_test_suite(gcm gcm.camellia)
+add_test_suite(gcm gcm.misc)
add_test_suite(hkdf)
add_test_suite(hmac_drbg hmac_drbg.misc)
add_test_suite(hmac_drbg hmac_drbg.no_reseed)
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 64cb695..c5c0c3a 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -621,6 +621,7 @@
msg "build+test: MBEDTLS_CHECK_PARAMS without MBEDTLS_PLATFORM_C"
cleanup
+cp "$CONFIG_H" "$CONFIG_BAK"
scripts/config.pl full # includes CHECK_PARAMS
scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests
scripts/config.pl unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
@@ -636,6 +637,7 @@
msg "build+test: MBEDTLS_CHECK_PARAMS with alternative MBEDTLS_PARAM_FAILED()"
cleanup
+cp "$CONFIG_H" "$CONFIG_BAK"
scripts/config.pl full # includes CHECK_PARAMS
scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests
sed -i 's/.*\(#define MBEDTLS_PARAM_FAILED( cond )\).*/\1/' "$CONFIG_H"
diff --git a/tests/suites/helpers.function b/tests/suites/helpers.function
index 3aa5cd6..2e227f0 100644
--- a/tests/suites/helpers.function
+++ b/tests/suites/helpers.function
@@ -632,4 +632,3 @@
}
return ret;
}
-
diff --git a/tests/suites/test_suite_aes.function b/tests/suites/test_suite_aes.function
index 1315650..da8c1e9 100644
--- a/tests/suites/test_suite_aes.function
+++ b/tests/suites/test_suite_aes.function
@@ -194,8 +194,8 @@
void aes_crypt_xts_size( int size, int retval )
{
mbedtls_aes_xts_context ctx;
- const unsigned char *src = NULL;
- unsigned char *output = NULL;
+ const unsigned char src[16] = { 0 };
+ unsigned char output[16];
unsigned char data_unit[16];
size_t length = size;
@@ -203,10 +203,8 @@
memset( data_unit, 0x00, sizeof( data_unit ) );
- /* Note that this function will most likely crash on failure, as NULL
- * parameters will be used. In the passing case, the length check in
- * mbedtls_aes_crypt_xts() will prevent any accesses to parameters by
- * exiting the function early. */
+ /* Valid pointers are passed for builds with MBEDTLS_CHECK_PARAMS, as
+ * otherwise we wouldn't get to the size check we're interested in. */
TEST_ASSERT( mbedtls_aes_crypt_xts( &ctx, MBEDTLS_AES_ENCRYPT, length, data_unit, src, output ) == retval );
}
/* END_CASE */
@@ -215,7 +213,7 @@
void aes_crypt_xts_keysize( int size, int retval )
{
mbedtls_aes_xts_context ctx;
- const unsigned char *key = NULL;
+ const unsigned char key[] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06 };
size_t key_len = size;
mbedtls_aes_xts_init( &ctx );
@@ -372,39 +370,255 @@
/* END_CASE */
/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
-void aes_invalid_param( )
+void aes_check_params( )
{
- mbedtls_aes_context dummy_ctx;
+ mbedtls_aes_context aes_ctx;
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+ mbedtls_aes_xts_context xts_ctx;
+#endif
const unsigned char key[] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06 };
+ const unsigned char in[16] = { 0 };
+ unsigned char out[16];
+ size_t size;
+ const int valid_mode = MBEDTLS_AES_ENCRYPT;
+ const int invalid_mode = 42;
TEST_INVALID_PARAM( mbedtls_aes_init( NULL ) );
-
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
TEST_INVALID_PARAM( mbedtls_aes_xts_init( NULL ) );
+#endif
- /* mbedtls_aes_setkey_enc() */
TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
mbedtls_aes_setkey_enc( NULL, key, 128 ) );
-
TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
- mbedtls_aes_setkey_enc( &dummy_ctx, NULL, 128 ) );
+ mbedtls_aes_setkey_enc( &aes_ctx, NULL, 128 ) );
- /* mbedtls_aes_setkey_dec() */
TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
mbedtls_aes_setkey_dec( NULL, key, 128 ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_setkey_dec( &aes_ctx, NULL, 128 ) );
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_xts_setkey_enc( NULL, key, 128 ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_xts_setkey_enc( &xts_ctx, NULL, 128 ) );
TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
- mbedtls_aes_setkey_dec( &dummy_ctx, NULL, 128 ) );
+ mbedtls_aes_xts_setkey_dec( NULL, key, 128 ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_xts_setkey_dec( &xts_ctx, NULL, 128 ) );
+#endif
+
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ecb( NULL,
+ valid_mode, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ecb( &aes_ctx,
+ invalid_mode, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ecb( &aes_ctx,
+ valid_mode, NULL, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ecb( &aes_ctx,
+ valid_mode, in, NULL ) );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cbc( NULL,
+ valid_mode, 16,
+ out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cbc( &aes_ctx,
+ invalid_mode, 16,
+ out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cbc( &aes_ctx,
+ valid_mode, 16,
+ NULL, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cbc( &aes_ctx,
+ valid_mode, 16,
+ out, NULL, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cbc( &aes_ctx,
+ valid_mode, 16,
+ out, in, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_xts( NULL,
+ valid_mode, 16,
+ in, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_xts( &xts_ctx,
+ invalid_mode, 16,
+ in, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_xts( &xts_ctx,
+ valid_mode, 16,
+ NULL, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_xts( &xts_ctx,
+ valid_mode, 16,
+ in, NULL, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_xts( &xts_ctx,
+ valid_mode, 16,
+ in, in, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb128( NULL,
+ valid_mode, 16,
+ &size, out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb128( &aes_ctx,
+ invalid_mode, 16,
+ &size, out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb128( &aes_ctx,
+ valid_mode, 16,
+ NULL, out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb128( &aes_ctx,
+ valid_mode, 16,
+ &size, NULL, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb128( &aes_ctx,
+ valid_mode, 16,
+ &size, out, NULL, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb128( &aes_ctx,
+ valid_mode, 16,
+ &size, out, in, NULL ) );
+
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb8( NULL,
+ valid_mode, 16,
+ out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb8( &aes_ctx,
+ invalid_mode, 16,
+ out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb8( &aes_ctx,
+ valid_mode, 16,
+ NULL, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb8( &aes_ctx,
+ valid_mode, 16,
+ out, NULL, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_cfb8( &aes_ctx,
+ valid_mode, 16,
+ out, in, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_OFB)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ofb( NULL, 16,
+ &size, out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ofb( &aes_ctx, 16,
+ NULL, out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ofb( &aes_ctx, 16,
+ &size, NULL, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ofb( &aes_ctx, 16,
+ &size, out, NULL, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ofb( &aes_ctx, 16,
+ &size, out, in, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_OFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ctr( NULL, 16, &size, out,
+ out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ctr( &aes_ctx, 16, NULL, out,
+ out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ctr( &aes_ctx, 16, &size, NULL,
+ out, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ctr( &aes_ctx, 16, &size, out,
+ NULL, in, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ctr( &aes_ctx, 16, &size, out,
+ out, NULL, out ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_AES_BAD_INPUT_DATA,
+ mbedtls_aes_crypt_ctr( &aes_ctx, 16, &size, out,
+ out, in, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
}
/* END_CASE */
/* BEGIN_CASE */
-void aes_valid_param( )
+void aes_misc_params( )
{
+#if defined(MBEDTLS_CIPHER_MODE_CBC) || \
+ defined(MBEDTLS_CIPHER_MODE_XTS) || \
+ defined(MBEDTLS_CIPHER_MODE_CFB) || \
+ defined(MBEDTLS_CIPHER_MODE_OFB)
+ mbedtls_aes_context aes_ctx;
+ const unsigned char in[16] = { 0 };
+ unsigned char out[16];
+#endif
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+ mbedtls_aes_xts_context xts_ctx;
+#endif
+#if defined(MBEDTLS_CIPHER_MODE_CFB) || \
+ defined(MBEDTLS_CIPHER_MODE_OFB)
+ size_t size;
+#endif
+
/* These calls accept NULL */
TEST_VALID_PARAM( mbedtls_aes_free( NULL ) );
#if defined(MBEDTLS_CIPHER_MODE_XTS)
TEST_VALID_PARAM( mbedtls_aes_xts_free( NULL ) );
#endif
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+ TEST_ASSERT( mbedtls_aes_crypt_cbc( &aes_ctx, MBEDTLS_AES_ENCRYPT,
+ 15,
+ out, in, out )
+ == MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH );
+ TEST_ASSERT( mbedtls_aes_crypt_cbc( &aes_ctx, MBEDTLS_AES_ENCRYPT,
+ 17,
+ out, in, out )
+ == MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH );
+#endif
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+ TEST_ASSERT( mbedtls_aes_crypt_xts( &xts_ctx, MBEDTLS_AES_ENCRYPT,
+ 15,
+ in, in, out )
+ == MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH );
+ TEST_ASSERT( mbedtls_aes_crypt_xts( &xts_ctx, MBEDTLS_AES_ENCRYPT,
+ (1 << 24) + 1,
+ in, in, out )
+ == MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH );
+#endif
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+ size = 16;
+ TEST_ASSERT( mbedtls_aes_crypt_cfb128( &aes_ctx, MBEDTLS_AES_ENCRYPT, 16,
+ &size, out, in, out )
+ == MBEDTLS_ERR_AES_BAD_INPUT_DATA );
+#endif
+
+#if defined(MBEDTLS_CIPHER_MODE_OFB)
+ size = 16;
+ TEST_ASSERT( mbedtls_aes_crypt_ofb( &aes_ctx, 16, &size, out, in, out )
+ == MBEDTLS_ERR_AES_BAD_INPUT_DATA );
+#endif
}
/* END_CASE */
diff --git a/tests/suites/test_suite_aes.rest.data b/tests/suites/test_suite_aes.rest.data
index a5d843d..6a76b43 100644
--- a/tests/suites/test_suite_aes.rest.data
+++ b/tests/suites/test_suite_aes.rest.data
@@ -10,11 +10,11 @@
AES-256-CBC Decrypt (Invalid input length)
aes_decrypt_cbc:"0000000000000000000000000000000000000000000000000000000000000000":"00000000000000000000000000000000":"623a52fcea5d443e48d9181ab32c74":"":MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH
-AES - Invalid parameters
-aes_invalid_param:
+AES - Optional Parameter Validation (MBEDTLS_CHECK_PARAMS)
+aes_check_params:
-AES - Valid parameters
-aes_valid_param:
+AES - Mandatory Parameter Validation and Valid Parameters
+aes_misc_params:
AES Selftest
depends_on:MBEDTLS_SELF_TEST
diff --git a/tests/suites/test_suite_aria.data b/tests/suites/test_suite_aria.data
index 8cb2d2a..2da0b30 100644
--- a/tests/suites/test_suite_aria.data
+++ b/tests/suites/test_suite_aria.data
@@ -1,3 +1,9 @@
+ARIA - Valid parameters
+aria_valid_param:
+
+ARIA - Invalid parameters
+aria_invalid_param:
+
ARIA-128-ECB Encrypt - RFC 5794
aria_encrypt_ecb:"000102030405060708090a0b0c0d0e0f":"00112233445566778899aabbccddeeff":"d718fbd6ab644c739da95f3be6451778":0
diff --git a/tests/suites/test_suite_aria.function b/tests/suites/test_suite_aria.function
index 4e39078..7e35f15 100644
--- a/tests/suites/test_suite_aria.function
+++ b/tests/suites/test_suite_aria.function
@@ -17,6 +17,195 @@
*/
/* BEGIN_CASE */
+void aria_valid_param( )
+{
+ TEST_VALID_PARAM( mbedtls_aria_free( NULL ) );
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void aria_invalid_param( )
+{
+ mbedtls_aria_context ctx;
+ unsigned char key[128 / 8] = { 0 };
+ unsigned char input[MBEDTLS_ARIA_BLOCKSIZE] = { 0 };
+ unsigned char output[MBEDTLS_ARIA_BLOCKSIZE] = { 0 };
+ unsigned char iv[MBEDTLS_ARIA_BLOCKSIZE] = { 0 };
+ size_t iv_off = 0;
+
+ ((void) iv_off);
+ ((void) iv);
+
+ TEST_INVALID_PARAM( mbedtls_aria_init( NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_setkey_enc( NULL, key,
+ sizeof( key ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_setkey_enc( &ctx, NULL,
+ sizeof( key ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_setkey_dec( NULL, key,
+ sizeof( key ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_setkey_dec( &ctx, NULL,
+ sizeof( key ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ecb( NULL, input, output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ecb( &ctx, NULL, output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ecb( &ctx, input, NULL ) );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cbc( NULL,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cbc( &ctx,
+ 42 /* invalid mode */,
+ sizeof( input ),
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cbc( &ctx,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ NULL,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cbc( &ctx,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ iv,
+ NULL,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cbc( &ctx,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ iv,
+ input,
+ NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cfb128( NULL,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ &iv_off,
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cfb128( &ctx,
+ 42, /* invalid mode */
+ sizeof( input ),
+ &iv_off,
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cfb128( &ctx,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ NULL,
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cfb128( &ctx,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ &iv_off,
+ NULL,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cfb128( &ctx,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ &iv_off,
+ iv,
+ NULL,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_cfb128( &ctx,
+ MBEDTLS_ARIA_ENCRYPT,
+ sizeof( input ),
+ &iv_off,
+ iv,
+ input,
+ NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ctr( NULL,
+ sizeof( input ),
+ &iv_off,
+ iv,
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ctr( &ctx,
+ sizeof( input ),
+ NULL,
+ iv,
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ctr( &ctx,
+ sizeof( input ),
+ &iv_off,
+ NULL,
+ iv,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ctr( &ctx,
+ sizeof( input ),
+ &iv_off,
+ iv,
+ NULL,
+ input,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ctr( &ctx,
+ sizeof( input ),
+ &iv_off,
+ iv,
+ iv,
+ NULL,
+ output ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA,
+ mbedtls_aria_crypt_ctr( &ctx,
+ sizeof( input ),
+ &iv_off,
+ iv,
+ iv,
+ input,
+ NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+exit:
+ return;
+
+}
+/* END_CASE */
+
+/* BEGIN_CASE */
void aria_encrypt_ecb( char *hex_key_string, char *hex_src_string,
char *hex_dst_string, int setkey_result )
{
diff --git a/tests/suites/test_suite_blowfish.data b/tests/suites/test_suite_blowfish.data
index 1ba311f..fd172d3 100644
--- a/tests/suites/test_suite_blowfish.data
+++ b/tests/suites/test_suite_blowfish.data
@@ -1,3 +1,9 @@
+BLOWFISH - Valid parameters
+blowfish_valid_param:
+
+BLOWFISH - Invalid parameters
+blowfish_invalid_param:
+
BLOWFISH-ECB Encrypt SSLeay reference #1
blowfish_encrypt_ecb:"0000000000000000":"0000000000000000":"4ef997456198dd78":0
@@ -203,13 +209,13 @@
blowfish_decrypt_ecb:"fedcba9876543210":"6b5c5a9c5d9e0a5a":"ffffffffffffffff":0
BLOWFISH-SETKEY Setkey SSLeay reference #1
-blowfish_encrypt_ecb:"f0":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
+blowfish_encrypt_ecb:"f0":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA
BLOWFISH-SETKEY Setkey SSLeay reference #2
-blowfish_encrypt_ecb:"f0e1":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
+blowfish_encrypt_ecb:"f0e1":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA
BLOWFISH-SETKEY Setkey SSLeay reference #3
-blowfish_encrypt_ecb:"f0e1d2":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
+blowfish_encrypt_ecb:"f0e1d2":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA
BLOWFISH-SETKEY Setkey SSLeay reference #4
blowfish_encrypt_ecb:"f0e1d2c3":"fedcba9876543210":"be1e639408640f05":0
@@ -281,7 +287,7 @@
blowfish_encrypt_ecb:"f0e1d2c3b4a5968778695a4b3c2d1e0f00112233445566778899aabbccddeeff0123456789abcdef0102030405060708090a0b0c0d0e0fff":"fedcba9876543210":"2fb3ab7f0ee91b69":0
BLOWFISH-SETKEY Setkey 456 bits
-blowfish_encrypt_ecb:"f0e1d2c3b4a5968778695a4b3c2d1e0f00112233445566778899aabbccddeeff0123456789abcdef0102030405060708090a0b0c0d0e0fffff":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
+blowfish_encrypt_ecb:"f0e1d2c3b4a5968778695a4b3c2d1e0f00112233445566778899aabbccddeeff0123456789abcdef0102030405060708090a0b0c0d0e0fffff":"fedcba9876543210":"":MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA
BLOWFISH-CBC Encrypt
blowfish_encrypt_cbc:"0123456789ABCDEFF0E1D2C3B4A59687":"FEDCBA9876543210":"37363534333231204E6F77206973207468652074696D6520666F722000000000":"6b77b4d63006dee605b156e27403979358deb9e7154616d959f1652bd5ff92cc":0
diff --git a/tests/suites/test_suite_blowfish.function b/tests/suites/test_suite_blowfish.function
index 189e23d..7a93cd1 100644
--- a/tests/suites/test_suite_blowfish.function
+++ b/tests/suites/test_suite_blowfish.function
@@ -8,6 +8,164 @@
*/
/* BEGIN_CASE */
+void blowfish_valid_param( )
+{
+ TEST_VALID_PARAM( mbedtls_blowfish_free( NULL ) );
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void blowfish_invalid_param( )
+{
+ mbedtls_blowfish_context ctx;
+ unsigned char buf[16] = { 0 };
+ size_t const valid_keylength = sizeof( buf ) * 8;
+ size_t valid_mode = MBEDTLS_BLOWFISH_ENCRYPT;
+ size_t invalid_mode = 42;
+ size_t off;
+ ((void) off);
+
+ TEST_INVALID_PARAM( mbedtls_blowfish_init( NULL ) );
+ TEST_VALID_PARAM( mbedtls_blowfish_free( NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_setkey( NULL,
+ buf,
+ valid_keylength ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_setkey( &ctx,
+ NULL,
+ valid_keylength ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ecb( NULL,
+ valid_mode,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ecb( &ctx,
+ invalid_mode,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ecb( &ctx,
+ valid_mode,
+ NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ecb( &ctx,
+ valid_mode,
+ buf, NULL ) );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cbc( NULL,
+ valid_mode,
+ sizeof( buf ),
+ buf, buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cbc( &ctx,
+ invalid_mode,
+ sizeof( buf ),
+ buf, buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cbc( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ NULL, buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cbc( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ buf, NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cbc( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ buf, buf, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cfb64( NULL,
+ valid_mode,
+ sizeof( buf ),
+ &off, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cfb64( &ctx,
+ invalid_mode,
+ sizeof( buf ),
+ &off, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cfb64( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ NULL, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cfb64( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ &off, NULL,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cfb64( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ &off, buf,
+ NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_cfb64( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ &off, buf,
+ buf, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ctr( NULL,
+ sizeof( buf ),
+ &off,
+ buf, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ctr( &ctx,
+ sizeof( buf ),
+ NULL,
+ buf, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ NULL, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ buf, NULL,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ buf, buf,
+ NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA,
+ mbedtls_blowfish_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ buf, buf,
+ buf, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+exit:
+ return;
+}
+/* END_CASE */
+
+/* BEGIN_CASE */
void blowfish_encrypt_ecb( data_t * key_str, data_t * src_str,
data_t * hex_dst_string, int setkey_result )
{
diff --git a/tests/suites/test_suite_camellia.data b/tests/suites/test_suite_camellia.data
index 1429838..671d570 100644
--- a/tests/suites/test_suite_camellia.data
+++ b/tests/suites/test_suite_camellia.data
@@ -1,3 +1,9 @@
+Camellia - Valid parameters
+camellia_valid_param:
+
+Camellia - Invalid parameters
+camellia_invalid_param:
+
Camellia-128-ECB Encrypt RFC3713 #1
camellia_encrypt_ecb:"0123456789abcdeffedcba9876543210":"0123456789abcdeffedcba9876543210":"67673138549669730857065648eabe43":0
@@ -185,10 +191,10 @@
camellia_decrypt_cfb128:"603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4":"555FC3F34BDD2D54C62D9E3BF338C1C4":"F69F2445DF4F9B17AD2B417BE66C3710":"5953ADCE14DB8C7F39F1BD39F359BFFA"
Camellia-ECB Encrypt (Invalid key length)
-camellia_encrypt_ecb:"0123456789abcdeffedcba98765432":"0123456789abcdeffedcba9876543210":"67673138549669730857065648eabe43":MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+camellia_encrypt_ecb:"0123456789abcdeffedcba98765432":"0123456789abcdeffedcba9876543210":"67673138549669730857065648eabe43":MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA
Camellia-ECB Decrypt (Invalid key length)
-camellia_decrypt_ecb:"0123456789abcdeffedcba98765432":"0123456789abcdeffedcba9876543210":"67673138549669730857065648eabe43":MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+camellia_decrypt_ecb:"0123456789abcdeffedcba98765432":"0123456789abcdeffedcba9876543210":"67673138549669730857065648eabe43":MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA
Camellia-256-CBC Encrypt (Invalid input length)
camellia_encrypt_cbc:"0000000000000000000000000000000000000000000000000000000000000000":"00000000000000000000000000000000":"ffffffffffffffe000000000000000":"":MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
diff --git a/tests/suites/test_suite_camellia.function b/tests/suites/test_suite_camellia.function
index d09a610..9408348 100644
--- a/tests/suites/test_suite_camellia.function
+++ b/tests/suites/test_suite_camellia.function
@@ -8,6 +8,172 @@
*/
/* BEGIN_CASE */
+void camellia_valid_param( )
+{
+ TEST_VALID_PARAM( mbedtls_camellia_free( NULL ) );
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void camellia_invalid_param( )
+{
+ mbedtls_camellia_context ctx;
+ unsigned char buf[16] = { 0 };
+ const size_t valid_keybits = 128;
+ const int invalid_mode = 42;
+ const int valid_mode = MBEDTLS_CAMELLIA_ENCRYPT;
+ size_t off;
+ ((void) off);
+
+ TEST_INVALID_PARAM( mbedtls_camellia_init( NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_setkey_enc( NULL,
+ buf,
+ valid_keybits ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_setkey_enc( &ctx,
+ NULL,
+ valid_keybits ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_setkey_dec( NULL,
+ buf,
+ valid_keybits ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_setkey_dec( &ctx,
+ NULL,
+ valid_keybits ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ecb( NULL,
+ valid_mode,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ecb( &ctx,
+ invalid_mode,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ecb( &ctx,
+ valid_mode,
+ NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ecb( &ctx,
+ valid_mode,
+ buf, NULL ) );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cbc( NULL,
+ valid_mode,
+ sizeof( buf ),
+ buf, buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cbc( &ctx,
+ invalid_mode,
+ sizeof( buf ),
+ buf, buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cbc( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ NULL, buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cbc( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ buf, NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cbc( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ buf, buf, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cfb128( NULL,
+ valid_mode,
+ sizeof( buf ),
+ &off, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cfb128( &ctx,
+ invalid_mode,
+ sizeof( buf ),
+ &off, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cfb128( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ NULL, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cfb128( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ &off, NULL,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cfb128( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ &off, buf,
+ NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_cfb128( &ctx,
+ valid_mode,
+ sizeof( buf ),
+ &off, buf,
+ buf, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ctr( NULL,
+ sizeof( buf ),
+ &off,
+ buf, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ctr( &ctx,
+ sizeof( buf ),
+ NULL,
+ buf, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ NULL, buf,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ buf, NULL,
+ buf, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ buf, buf,
+ NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA,
+ mbedtls_camellia_crypt_ctr( &ctx,
+ sizeof( buf ),
+ &off,
+ buf, buf,
+ buf, NULL ) );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+exit:
+ return;
+}
+/* END_CASE */
+
+/* BEGIN_CASE */
void camellia_encrypt_ecb( data_t * key_str, data_t * src_str,
data_t * hex_dst_string, int setkey_result )
{
diff --git a/tests/suites/test_suite_ccm.data b/tests/suites/test_suite_ccm.data
index a2d8778..819b3b7 100644
--- a/tests/suites/test_suite_ccm.data
+++ b/tests/suites/test_suite_ccm.data
@@ -1,6 +1,12 @@
CCM self test
mbedtls_ccm_self_test:
+CCM - Invalid parameters
+ccm_invalid_param:
+
+CCM - Valid parameters
+ccm_valid_param:
+
CCM init #1 AES-128: OK
depends_on:MBEDTLS_AES_C
mbedtls_ccm_setkey:MBEDTLS_CIPHER_ID_AES:128:0
diff --git a/tests/suites/test_suite_ccm.function b/tests/suites/test_suite_ccm.function
index 9951ca1..16f9f8e 100644
--- a/tests/suites/test_suite_ccm.function
+++ b/tests/suites/test_suite_ccm.function
@@ -326,3 +326,216 @@
mbedtls_ccm_free( &ctx );
}
/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void ccm_invalid_param( )
+{
+ struct mbedtls_ccm_context ctx;
+ unsigned char valid_buffer[] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06 };
+ mbedtls_cipher_id_t valid_cipher = MBEDTLS_CIPHER_ID_AES;
+ int valid_len = sizeof(valid_buffer);
+ int valid_bitlen = valid_len * 8;
+
+ mbedtls_ccm_init( &ctx );
+
+ /* mbedtls_ccm_init() */
+ TEST_INVALID_PARAM( mbedtls_ccm_init( NULL ) );
+
+ /* mbedtls_ccm_setkey() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_setkey( NULL, valid_cipher, valid_buffer, valid_bitlen ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_setkey( &ctx, valid_cipher, NULL, valid_bitlen ) );
+
+ /* mbedtls_ccm_encrypt_and_tag() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_encrypt_and_tag( NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_encrypt_and_tag( &ctx, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, NULL,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ NULL, valid_len ) );
+
+ /* mbedtls_ccm_star_encrypt_and_tag() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_encrypt_and_tag( NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_encrypt_and_tag( &ctx, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, NULL,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_encrypt_and_tag( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ NULL, valid_len ) );
+
+ /* mbedtls_ccm_auth_decrypt() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_auth_decrypt( NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_auth_decrypt( &ctx, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, NULL,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ NULL, valid_len ) );
+
+ /* mbedtls_ccm_star_auth_decrypt() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_auth_decrypt( NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_auth_decrypt( &ctx, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_buffer,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, NULL,
+ valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_CCM_BAD_INPUT,
+ mbedtls_ccm_star_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ NULL, valid_len ) );
+
+exit:
+ mbedtls_ccm_free( &ctx );
+ return;
+}
+/* END_CASE */
+
+/* BEGIN_CASE */
+void ccm_valid_param( )
+{
+ TEST_VALID_PARAM( mbedtls_ccm_free( NULL ) );
+exit:
+ return;
+}
+/* END_CASE */
diff --git a/tests/suites/test_suite_dhm.data b/tests/suites/test_suite_dhm.data
index 734fd97..edebce0 100644
--- a/tests/suites/test_suite_dhm.data
+++ b/tests/suites/test_suite_dhm.data
@@ -1,3 +1,6 @@
+Diffie-Hellman parameter validation
+dhm_invalid_params:
+
Diffie-Hellman full exchange #1
dhm_do_dhm:10:"23":10:"5":0
diff --git a/tests/suites/test_suite_dhm.function b/tests/suites/test_suite_dhm.function
index 9a4c99c..8a05a38 100644
--- a/tests/suites/test_suite_dhm.function
+++ b/tests/suites/test_suite_dhm.function
@@ -7,6 +7,113 @@
* END_DEPENDENCIES
*/
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void dhm_invalid_params( )
+{
+ mbedtls_dhm_context ctx;
+ unsigned char buf[42] = { 0 };
+ unsigned char *buf_null = NULL;
+ mbedtls_mpi X;
+ size_t const buflen = sizeof( buf );
+ size_t len;
+
+ TEST_INVALID_PARAM( mbedtls_dhm_init( NULL ) );
+ TEST_VALID_PARAM( mbedtls_dhm_free( NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_read_params( NULL,
+ (unsigned char**) &buf,
+ buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_read_params( &ctx, &buf_null, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_read_params( &ctx, NULL, buf ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_read_params( &ctx,
+ (unsigned char**) &buf,
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_make_params( NULL, buflen,
+ buf, &len,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_make_params( &ctx, buflen,
+ NULL, &len,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_make_params( &ctx, buflen,
+ buf, NULL,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_make_params( &ctx, buflen,
+ buf, &len,
+ NULL,
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_set_group( NULL, &X, &X ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_set_group( &ctx, NULL, &X ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_set_group( &ctx, &X, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_read_public( NULL, buf, buflen ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_read_public( &ctx, NULL, buflen ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_make_public( NULL, buflen,
+ buf, buflen,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_make_public( &ctx, buflen,
+ NULL, buflen,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_make_public( &ctx, buflen,
+ buf, buflen,
+ NULL,
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_calc_secret( NULL, buf, buflen,
+ &len, rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_calc_secret( &ctx, NULL, buflen,
+ &len, rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_calc_secret( &ctx, buf, buflen,
+ NULL, rnd_std_rand,
+ NULL ) );
+
+#if defined(MBEDTLS_ASN1_PARSE_C)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_parse_dhm( NULL, buf, buflen ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_parse_dhm( &ctx, NULL, buflen ) );
+
+#if defined(MBEDTLS_FS_IO)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_parse_dhmfile( NULL, "" ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_DHM_BAD_INPUT_DATA,
+ mbedtls_dhm_parse_dhmfile( &ctx, NULL ) );
+#endif /* MBEDTLS_FS_IO */
+#endif /* MBEDTLS_ASN1_PARSE_C */
+
+exit:
+ return;
+}
+/* END_CASE */
+
/* BEGIN_CASE */
void dhm_do_dhm( int radix_P, char *input_P,
int radix_G, char *input_G, int result )
diff --git a/tests/suites/test_suite_ecdsa.data b/tests/suites/test_suite_ecdsa.data
index 7e6ec6c..59e209b 100644
--- a/tests/suites/test_suite_ecdsa.data
+++ b/tests/suites/test_suite_ecdsa.data
@@ -1,3 +1,6 @@
+ECDSA Parameter validation
+ecdsa_invalid_param:
+
ECDSA primitive random #1
depends_on:MBEDTLS_ECP_DP_SECP192R1_ENABLED
ecdsa_prim_random:MBEDTLS_ECP_DP_SECP192R1
diff --git a/tests/suites/test_suite_ecdsa.function b/tests/suites/test_suite_ecdsa.function
index 7107832..22d92b6 100644
--- a/tests/suites/test_suite_ecdsa.function
+++ b/tests/suites/test_suite_ecdsa.function
@@ -7,6 +7,201 @@
* END_DEPENDENCIES
*/
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void ecdsa_invalid_param( )
+{
+ mbedtls_ecdsa_context ctx;
+ mbedtls_ecp_keypair key;
+ mbedtls_ecp_group grp;
+ mbedtls_ecp_group_id valid_group = MBEDTLS_ECP_DP_SECP192R1;
+ mbedtls_ecp_point P;
+ mbedtls_md_type_t valid_md = MBEDTLS_MD_SHA256;
+ mbedtls_mpi m;
+ size_t slen;
+ unsigned char buf[42] = { 0 };
+
+ TEST_INVALID_PARAM( mbedtls_ecdsa_init( NULL ) );
+ TEST_VALID_PARAM( mbedtls_ecdsa_free( NULL ) );
+
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+ TEST_INVALID_PARAM( mbedtls_ecdsa_restart_init( NULL ) );
+ TEST_VALID_PARAM( mbedtls_ecdsa_restart_free( NULL ) );
+#endif /* MBEDTLS_ECP_RESTARTABLE */
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign( NULL, &m, &m, &m,
+ buf, sizeof( buf ),
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign( &grp, NULL, &m, &m,
+ buf, sizeof( buf ),
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign( &grp, &m, NULL, &m,
+ buf, sizeof( buf ),
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign( &grp, &m, &m, NULL,
+ buf, sizeof( buf ),
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign( &grp, &m, &m, &m,
+ NULL, sizeof( buf ),
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign( &grp, &m, &m, &m,
+ buf, sizeof( buf ),
+ NULL, NULL ) );
+
+#if defined(MBEDTLS_ECDSA_DETERMINISTIC)
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign_det( NULL, &m, &m, &m,
+ buf, sizeof( buf ),
+ valid_md ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign_det( &grp, NULL, &m, &m,
+ buf, sizeof( buf ),
+ valid_md ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign_det( &grp, &m, NULL, &m,
+ buf, sizeof( buf ),
+ valid_md ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign_det( &grp, &m, &m, NULL,
+ buf, sizeof( buf ),
+ valid_md ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_sign_det( &grp, &m, &m, &m,
+ NULL, sizeof( buf ),
+ valid_md ) );
+#endif /* MBEDTLS_ECDSA_DETERMINISTIC */
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_verify( NULL,
+ buf, sizeof( buf ),
+ &P, &m, &m ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_verify( &grp,
+ NULL, sizeof( buf ),
+ &P, &m, &m ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_verify( &grp,
+ buf, sizeof( buf ),
+ NULL, &m, &m ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_verify( &grp,
+ buf, sizeof( buf ),
+ &P, NULL, &m ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_verify( &grp,
+ buf, sizeof( buf ),
+ &P, &m, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature( NULL,
+ valid_md,
+ buf, sizeof( buf ),
+ buf, &slen,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature( &ctx,
+ valid_md,
+ NULL, sizeof( buf ),
+ buf, &slen,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature( &ctx,
+ valid_md,
+ buf, sizeof( buf ),
+ NULL, &slen,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature( &ctx,
+ valid_md,
+ buf, sizeof( buf ),
+ buf, NULL,
+ rnd_std_rand,
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature_restartable( NULL,
+ valid_md,
+ buf, sizeof( buf ),
+ buf, &slen,
+ rnd_std_rand,
+ NULL, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature_restartable( &ctx,
+ valid_md,
+ NULL, sizeof( buf ),
+ buf, &slen,
+ rnd_std_rand,
+ NULL, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature_restartable( &ctx,
+ valid_md,
+ buf, sizeof( buf ),
+ NULL, &slen,
+ rnd_std_rand,
+ NULL, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_write_signature_restartable( &ctx,
+ valid_md,
+ buf, sizeof( buf ),
+ buf, NULL,
+ rnd_std_rand,
+ NULL, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_read_signature( NULL,
+ buf, sizeof( buf ),
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_read_signature( &ctx,
+ NULL, sizeof( buf ),
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_read_signature( &ctx,
+ buf, sizeof( buf ),
+ NULL, sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_read_signature_restartable( NULL,
+ buf, sizeof( buf ),
+ buf, sizeof( buf ),
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_read_signature_restartable( &ctx,
+ NULL, sizeof( buf ),
+ buf, sizeof( buf ),
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_read_signature_restartable( &ctx,
+ buf, sizeof( buf ),
+ NULL, sizeof( buf ),
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_genkey( NULL, valid_group,
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_genkey( &ctx, valid_group,
+ NULL, NULL ) );
+
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_from_keypair( NULL, &key ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecdsa_from_keypair( &ctx, NULL ) );
+
+exit:
+ return;
+}
+/* END_CASE */
+
/* BEGIN_CASE */
void ecdsa_prim_random( int id )
{
diff --git a/tests/suites/test_suite_ecp.data b/tests/suites/test_suite_ecp.data
index 321a1b4..30d5ec6 100644
--- a/tests/suites/test_suite_ecp.data
+++ b/tests/suites/test_suite_ecp.data
@@ -1,3 +1,9 @@
+ECP valid params
+ecp_valid_param:
+
+ECP invalid params
+ecp_invalid_param:
+
ECP curve info #1
depends_on:MBEDTLS_ECP_DP_BP512R1_ENABLED
mbedtls_ecp_curve_info:MBEDTLS_ECP_DP_BP512R1:28:512:"brainpoolP512r1"
@@ -46,10 +52,6 @@
depends_on:MBEDTLS_ECP_DP_SECP224K1_ENABLED
ecp_check_pub:MBEDTLS_ECP_DP_SECP224K1:"E2000000000000BB3A13D43B323337383935321F0603551D":"100101FF040830060101FF02010A30220603551D0E041B04636FC0C0":"101":MBEDTLS_ERR_ECP_INVALID_KEY
-ECP write binary #0 (zero, bad format)
-depends_on:MBEDTLS_ECP_DP_SECP192R1_ENABLED
-ecp_write_binary:MBEDTLS_ECP_DP_SECP192R1:"01":"01":"00":ECP_PF_UNKNOWN:"00":1:MBEDTLS_ERR_ECP_BAD_INPUT_DATA
-
ECP write binary #1 (zero, uncompressed, buffer just fits)
depends_on:MBEDTLS_ECP_DP_SECP192R1_ENABLED
ecp_write_binary:MBEDTLS_ECP_DP_SECP192R1:"01":"01":"00":MBEDTLS_ECP_PF_UNCOMPRESSED:"00":1:0
diff --git a/tests/suites/test_suite_ecp.function b/tests/suites/test_suite_ecp.function
index 65c487e..606ddd2 100644
--- a/tests/suites/test_suite_ecp.function
+++ b/tests/suites/test_suite_ecp.function
@@ -14,6 +14,349 @@
*/
/* BEGIN_CASE */
+void ecp_valid_param( )
+{
+ TEST_VALID_PARAM( mbedtls_ecp_group_free( NULL ) );
+ TEST_VALID_PARAM( mbedtls_ecp_keypair_free( NULL ) );
+ TEST_VALID_PARAM( mbedtls_ecp_point_free( NULL ) );
+
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+ TEST_VALID_PARAM( mbedtls_ecp_restart_free( NULL ) );
+#endif /* MBEDTLS_ECP_RESTARTABLE */
+
+exit:
+ return;
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void ecp_invalid_param( )
+{
+ mbedtls_ecp_group grp;
+ mbedtls_ecp_keypair kp;
+ mbedtls_ecp_point P;
+ mbedtls_mpi m;
+ const char *x = "deadbeef";
+ int valid_fmt = MBEDTLS_ECP_PF_UNCOMPRESSED;
+ int invalid_fmt = 42;
+ size_t olen;
+ unsigned char buf[42] = { 0 };
+ const unsigned char *null_buf = NULL;
+ mbedtls_ecp_group_id valid_group = MBEDTLS_ECP_DP_SECP192R1;
+ mbedtls_ecp_restart_ctx restart_ctx;
+
+ TEST_INVALID_PARAM( mbedtls_ecp_point_init( NULL ) );
+ TEST_INVALID_PARAM( mbedtls_ecp_keypair_init( NULL ) );
+ TEST_INVALID_PARAM( mbedtls_ecp_group_init( NULL ) );
+
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+ TEST_INVALID_PARAM( mbedtls_ecp_restart_init( NULL ) );
+ TEST_INVALID_PARAM( mbedtls_ecp_check_budget( NULL, &restart_ctx, 42 ) );
+#endif /* MBEDTLS_ECP_RESTARTABLE */
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_copy( NULL, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_copy( &P, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_group_copy( NULL, &grp ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_group_copy( &grp, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_privkey( NULL,
+ &m,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_privkey( &grp,
+ NULL,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_privkey( &grp,
+ &m,
+ NULL,
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_set_zero( NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_is_zero( NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_cmp( NULL, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_cmp( &P, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_read_string( NULL, 2,
+ x, x ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_read_string( &P, 2,
+ NULL, x ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_read_string( &P, 2,
+ x, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_write_binary( NULL, &P,
+ valid_fmt,
+ &olen,
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_write_binary( &grp, NULL,
+ valid_fmt,
+ &olen,
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_write_binary( &grp, &P,
+ invalid_fmt,
+ &olen,
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_write_binary( &grp, &P,
+ valid_fmt,
+ NULL,
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_write_binary( &grp, &P,
+ valid_fmt,
+ &olen,
+ NULL, sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_read_binary( NULL, &P, buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_read_binary( &grp, NULL, buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_point_read_binary( &grp, &P, NULL,
+ sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_point( NULL, &P,
+ (const unsigned char **) &buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_point( &grp, NULL,
+ (const unsigned char **) &buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_point( &grp, &P, &null_buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_point( &grp, &P, NULL,
+ sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_point( NULL, &P,
+ valid_fmt,
+ &olen,
+ buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_point( &grp, NULL,
+ valid_fmt,
+ &olen,
+ buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_point( &grp, &P,
+ invalid_fmt,
+ &olen,
+ buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_point( &grp, &P,
+ valid_fmt,
+ NULL,
+ buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_point( &grp, &P,
+ valid_fmt,
+ &olen,
+ NULL,
+ sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_group_load( NULL, valid_group ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_group( NULL,
+ (const unsigned char **) &buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_group( &grp, NULL,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_group( &grp, &null_buf,
+ sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_group_id( NULL,
+ (const unsigned char **) &buf,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_group_id( &valid_group, NULL,
+ sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_read_group_id( &valid_group,
+ &null_buf,
+ sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_group( NULL, &olen,
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_group( &grp, NULL,
+ buf, sizeof( buf ) ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_tls_write_group( &grp, &olen,
+ NULL, sizeof( buf ) ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul( NULL, &P, &m, &P,
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul( &grp, NULL, &m, &P,
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul( &grp, &P, NULL, &P,
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul( &grp, &P, &m, NULL,
+ rnd_std_rand, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul_restartable( NULL, &P, &m, &P,
+ rnd_std_rand, NULL , NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul_restartable( &grp, NULL, &m, &P,
+ rnd_std_rand, NULL , NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul_restartable( &grp, &P, NULL, &P,
+ rnd_std_rand, NULL , NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_mul_restartable( &grp, &P, &m, NULL,
+ rnd_std_rand, NULL , NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd( NULL, &P, &m, &P,
+ &m, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd( &grp, NULL, &m, &P,
+ &m, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd( &grp, &P, NULL, &P,
+ &m, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd( &grp, &P, &m, NULL,
+ &m, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd( &grp, &P, &m, &P,
+ NULL, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd( &grp, &P, &m, &P,
+ &m, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd_restartable( NULL, &P, &m, &P,
+ &m, &P, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd_restartable( &grp, NULL, &m, &P,
+ &m, &P, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd_restartable( &grp, &P, NULL, &P,
+ &m, &P, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd_restartable( &grp, &P, &m, NULL,
+ &m, &P, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd_restartable( &grp, &P, &m, &P,
+ NULL, &P, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_muladd_restartable( &grp, &P, &m, &P,
+ &m, NULL, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_check_pubkey( NULL, &P ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_check_pubkey( &grp, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_check_pub_priv( NULL, &kp ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_check_pub_priv( &kp, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_check_privkey( NULL, &m ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_check_privkey( &grp, NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair_base( NULL, &P,
+ &m, &P,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair_base( &grp, NULL,
+ &m, &P,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair_base( &grp, &P,
+ NULL, &P,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair_base( &grp, &P,
+ &m, NULL,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair_base( &grp, &P,
+ &m, &P,
+ NULL,
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair( NULL,
+ &m, &P,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair( &grp,
+ NULL, &P,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair( &grp,
+ &m, NULL,
+ rnd_std_rand,
+ NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_keypair( &grp,
+ &m, &P,
+ NULL,
+ NULL ) );
+
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_key( valid_group, NULL,
+ rnd_std_rand, NULL ) );
+ TEST_INVALID_PARAM_RET( MBEDTLS_ERR_ECP_BAD_INPUT_DATA,
+ mbedtls_ecp_gen_key( valid_group, &kp,
+ NULL, NULL ) );
+
+exit:
+ return;
+}
+/* END_CASE */
+
+/* BEGIN_CASE */
void mbedtls_ecp_curve_info( int id, int tls_id, int size, char * name )
{
const mbedtls_ecp_curve_info *by_id, *by_tls, *by_name;
diff --git a/tests/suites/test_suite_gcm.function b/tests/suites/test_suite_gcm.function
index 4d3bba1..1fcb681 100644
--- a/tests/suites/test_suite_gcm.function
+++ b/tests/suites/test_suite_gcm.function
@@ -103,6 +103,175 @@
}
/* END_CASE */
+/* BEGIN_CASE depends_on:MBEDTLS_CHECK_PARAMS:!MBEDTLS_PARAM_FAILED_ALT */
+void gcm_invalid_param( )
+{
+ mbedtls_gcm_context ctx;
+ unsigned char valid_buffer[] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06 };
+ mbedtls_cipher_id_t valid_cipher = MBEDTLS_CIPHER_ID_AES;
+ int valid_mode = MBEDTLS_GCM_ENCRYPT;
+ int valid_len = sizeof(valid_buffer);
+ int valid_bitlen = 128, invalid_bitlen = 1;
+
+ mbedtls_gcm_init( &ctx );
+
+ /* mbedtls_gcm_init() */
+ TEST_INVALID_PARAM( mbedtls_gcm_init( NULL ) );
+
+ /* mbedtls_gcm_setkey */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_setkey( NULL, valid_cipher, valid_buffer, valid_bitlen ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_setkey( &ctx, valid_cipher, NULL, valid_bitlen ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_setkey( &ctx, valid_cipher, valid_buffer, invalid_bitlen ) );
+
+ /* mbedtls_gcm_crypt_and_tag() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_crypt_and_tag( NULL, valid_mode, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_len, valid_buffer ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_crypt_and_tag( &ctx, valid_mode, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_len, valid_buffer ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_crypt_and_tag( &ctx, valid_mode, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_buffer,
+ valid_len, valid_buffer ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_crypt_and_tag( &ctx, valid_mode, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_buffer,
+ valid_len, valid_buffer ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_crypt_and_tag( &ctx, valid_mode, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, NULL,
+ valid_len, valid_buffer ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_crypt_and_tag( &ctx, valid_mode, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer,
+ valid_len, NULL ) );
+
+ /* mbedtls_gcm_auth_decrypt() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_auth_decrypt( NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_auth_decrypt( &ctx, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_buffer) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_len,
+ valid_buffer, valid_buffer) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ NULL, valid_buffer) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_auth_decrypt( &ctx, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len,
+ valid_buffer, NULL) );
+
+ /* mbedtls_gcm_starts() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_starts( NULL, valid_mode,
+ valid_buffer, valid_len,
+ valid_buffer, valid_len ) );
+
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_starts( &ctx, valid_mode,
+ NULL, valid_len,
+ valid_buffer, valid_len ) );
+
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_starts( &ctx, valid_mode,
+ valid_buffer, valid_len,
+ NULL, valid_len ) );
+
+ /* mbedtls_gcm_update() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_update( NULL, valid_len,
+ valid_buffer, valid_buffer ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_update( &ctx, valid_len,
+ NULL, valid_buffer ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_update( &ctx, valid_len,
+ valid_buffer, NULL ) );
+
+ /* mbedtls_gcm_finish() */
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_finish( NULL, valid_buffer, valid_len ) );
+ TEST_INVALID_PARAM_RET(
+ MBEDTLS_ERR_GCM_BAD_INPUT,
+ mbedtls_gcm_finish( &ctx, NULL, valid_len ) );
+
+exit:
+ mbedtls_gcm_free( &ctx );
+}
+/* END_CASE */
+
+/* BEGIN_CASE */
+void gcm_valid_param( )
+{
+ TEST_VALID_PARAM( mbedtls_gcm_free( NULL ) );
+exit:
+ return;
+}
+/* END_CASE */
+
/* BEGIN_CASE depends_on:MBEDTLS_SELF_TEST */
void gcm_selftest( )
{
diff --git a/tests/suites/test_suite_gcm.misc.data b/tests/suites/test_suite_gcm.misc.data
new file mode 100644
index 0000000..cf01526
--- /dev/null
+++ b/tests/suites/test_suite_gcm.misc.data
@@ -0,0 +1,5 @@
+GCM - Invalid parameters
+gcm_invalid_param:
+
+GCM - Valid parameters
+gcm_valid_param: