diff --git a/docs/use-psa-crypto.md b/docs/use-psa-crypto.md
index b22d37f..11442ed 100644
--- a/docs/use-psa-crypto.md
+++ b/docs/use-psa-crypto.md
@@ -86,7 +86,6 @@
 
 Current exceptions:
 
-- EC J-PAKE (when `MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED` is defined)
 - finite-field (non-EC) Diffie-Hellman (used in key exchanges: DHE-RSA,
   DHE-PSK)
 
diff --git a/include/mbedtls/ecjpake.h b/include/mbedtls/ecjpake.h
index e7ca1b2..3dd3361 100644
--- a/include/mbedtls/ecjpake.h
+++ b/include/mbedtls/ecjpake.h
@@ -113,7 +113,7 @@
  * \param curve     The identifier of the elliptic curve to use,
  *                  for example #MBEDTLS_ECP_DP_SECP256R1.
  * \param secret    The pre-shared secret (passphrase). This must be
- *                  a readable buffer of length \p len Bytes. It need
+ *                  a readable not empty buffer of length \p len Bytes. It need
  *                  only be valid for the duration of this call.
  * \param len       The length of the pre-shared secret \p secret.
  *
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index 8fec3c6..dddaaea 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -3856,9 +3856,10 @@
  * \note           The SSL context needs to be already set up. The right place
  *                 to call this function is between \c mbedtls_ssl_setup() or
  *                 \c mbedtls_ssl_reset() and \c mbedtls_ssl_handshake().
+ *                 Password cannot be empty (see RFC 8236).
  *
  * \param ssl      SSL context
- * \param pw       EC J-PAKE password (pre-shared secret)
+ * \param pw       EC J-PAKE password (pre-shared secret). It cannot be empty
  * \param pw_len   length of pw in bytes
  *
  * \return         0 on success, or a negative error code.
diff --git a/library/ssl_misc.h b/library/ssl_misc.h
index 4d7f635..9998e5b 100644
--- a/library/ssl_misc.h
+++ b/library/ssl_misc.h
@@ -50,7 +50,8 @@
 #include "mbedtls/sha512.h"
 #endif
 
-#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && \
+    !defined(MBEDTLS_USE_PSA_CRYPTO)
 #include "mbedtls/ecjpake.h"
 #endif
 
@@ -776,7 +777,13 @@
 #endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
 
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    psa_pake_operation_t psa_pake_ctx;        /*!< EC J-PAKE key exchange */
+    mbedtls_svc_key_id_t psa_pake_password;
+    uint8_t psa_pake_ctx_is_ok;
+#else
     mbedtls_ecjpake_context ecjpake_ctx;        /*!< EC J-PAKE key exchange */
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #if defined(MBEDTLS_SSL_CLI_C)
     unsigned char *ecjpake_cache;               /*!< Cache for ClientHello ext */
     size_t ecjpake_cache_len;                   /*!< Length of cached data */
@@ -2493,6 +2500,52 @@
 }
 #endif /* MBEDTLS_USE_PSA_CRYPTO || MBEDTLS_SSL_PROTO_TLS1_3 */
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && \
+    defined(MBEDTLS_USE_PSA_CRYPTO)
+
+typedef enum {
+    MBEDTLS_ECJPAKE_ROUND_ONE,
+    MBEDTLS_ECJPAKE_ROUND_TWO
+} mbedtls_ecjpake_rounds_t;
+
+/**
+ * \brief       Parse the provided input buffer for getting the first round
+ *              of key exchange. This code is common between server and client
+ *
+ * \param  pake_ctx [in] the PAKE's operation/context structure
+ * \param  buf      [in] input buffer to parse
+ * \param  len      [in] length of the input buffer
+ * \param  round    [in] either MBEDTLS_ECJPAKE_ROUND_ONE or
+ *                       MBEDTLS_ECJPAKE_ROUND_TWO
+ *
+ * \return               0 on success or a negative error code in case of failure
+ */
+int mbedtls_psa_ecjpake_read_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    const unsigned char *buf,
+                                    size_t len, mbedtls_ecjpake_rounds_t round );
+
+/**
+ * \brief       Write the first round of key exchange into the provided output
+ *              buffer. This code is common between server and client
+ *
+ * \param  pake_ctx [in] the PAKE's operation/context structure
+ * \param  buf      [out] the output buffer in which data will be written to
+ * \param  len      [in] length of the output buffer
+ * \param  olen     [out] the length of the data really written on the buffer
+ * \param  round    [in] either MBEDTLS_ECJPAKE_ROUND_ONE or
+ *                       MBEDTLS_ECJPAKE_ROUND_TWO
+ *
+ * \return               0 on success or a negative error code in case of failure
+ */
+int mbedtls_psa_ecjpake_write_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    unsigned char *buf,
+                                    size_t len, size_t *olen,
+                                    mbedtls_ecjpake_rounds_t round );
+
+#endif //MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED && MBEDTLS_USE_PSA_CRYPTO
+
 /**
  * \brief       TLS record protection modes
  */
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index 506333d..3d3491b 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -907,7 +907,12 @@
     mbedtls_ecdh_init( &handshake->ecdh_ctx );
 #endif
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    handshake->psa_pake_ctx = psa_pake_operation_init();
+    handshake->psa_pake_password = MBEDTLS_SVC_KEY_ID_INIT;
+#else
     mbedtls_ecjpake_init( &handshake->ecjpake_ctx );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #if defined(MBEDTLS_SSL_CLI_C)
     handshake->ecjpake_cache = NULL;
     handshake->ecjpake_cache_len = 0;
@@ -1850,6 +1855,73 @@
 /*
  * Set EC J-PAKE password for current handshake
  */
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
+                                         const unsigned char *pw,
+                                         size_t pw_len )
+{
+    psa_pake_cipher_suite_t cipher_suite = psa_pake_cipher_suite_init();
+    psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
+    psa_pake_role_t psa_role;
+    psa_status_t status;
+
+    if( ssl->handshake == NULL || ssl->conf == NULL )
+        return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
+
+    if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
+        psa_role = PSA_PAKE_ROLE_SERVER;
+    else
+        psa_role = PSA_PAKE_ROLE_CLIENT;
+
+    /* Empty password is not valid  */
+    if( ( pw == NULL) || ( pw_len == 0 ) )
+        return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
+
+    psa_set_key_usage_flags( &attributes, PSA_KEY_USAGE_DERIVE );
+    psa_set_key_algorithm( &attributes, PSA_ALG_JPAKE );
+    psa_set_key_type( &attributes, PSA_KEY_TYPE_PASSWORD );
+
+    status = psa_import_key( &attributes, pw, pw_len,
+                                &ssl->handshake->psa_pake_password );
+    if( status != PSA_SUCCESS )
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+
+    psa_pake_cs_set_algorithm( &cipher_suite, PSA_ALG_JPAKE );
+    psa_pake_cs_set_primitive( &cipher_suite,
+                               PSA_PAKE_PRIMITIVE( PSA_PAKE_PRIMITIVE_TYPE_ECC,
+                                                   PSA_ECC_FAMILY_SECP_R1,
+                                                   256) );
+    psa_pake_cs_set_hash( &cipher_suite, PSA_ALG_SHA_256 );
+
+    status = psa_pake_setup( &ssl->handshake->psa_pake_ctx, &cipher_suite );
+    if( status != PSA_SUCCESS )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+    }
+
+    status = psa_pake_set_role( &ssl->handshake->psa_pake_ctx, psa_role );
+    if( status != PSA_SUCCESS )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+    }
+
+    psa_pake_set_password_key( &ssl->handshake->psa_pake_ctx,
+                                ssl->handshake->psa_pake_password );
+    if( status != PSA_SUCCESS )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+        return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+    }
+
+    ssl->handshake->psa_pake_ctx_is_ok = 1;
+
+    return( 0 );
+}
+#else /* MBEDTLS_USE_PSA_CRYPTO */
 int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
                                          const unsigned char *pw,
                                          size_t pw_len )
@@ -1870,6 +1942,7 @@
                                    MBEDTLS_ECP_DP_SECP256R1,
                                    pw, pw_len ) );
 }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_SSL_HANDSHAKE_WITH_PSK_ENABLED)
@@ -3908,8 +3981,15 @@
 #if !defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_ECDH_C)
     mbedtls_ecdh_free( &handshake->ecdh_ctx );
 #endif
+
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    psa_pake_abort( &handshake->psa_pake_ctx );
+    psa_destroy_key( handshake->psa_pake_password );
+    handshake->psa_pake_password = MBEDTLS_SVC_KEY_ID_INIT;
+#else
     mbedtls_ecjpake_free( &handshake->ecjpake_ctx );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 #if defined(MBEDTLS_SSL_CLI_C)
     mbedtls_free( handshake->ecjpake_cache );
     handshake->ecjpake_cache = NULL;
@@ -6123,6 +6203,55 @@
     else
 #endif
     {
+#if defined(MBEDTLS_USE_PSA_CRYPTO) &&                              \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+        if( handshake->ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
+        {
+            psa_status_t status;
+            psa_algorithm_t alg = PSA_ALG_TLS12_ECJPAKE_TO_PMS;
+            psa_key_derivation_operation_t derivation =
+                PSA_KEY_DERIVATION_OPERATION_INIT;
+
+            MBEDTLS_SSL_DEBUG_MSG( 2, ( "perform PSA-based PMS KDF for ECJPAKE" ) );
+
+            handshake->pmslen = PSA_TLS12_ECJPAKE_TO_PMS_DATA_SIZE;
+
+            status = psa_key_derivation_setup( &derivation, alg );
+            if( status != PSA_SUCCESS )
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+
+            status = psa_key_derivation_set_capacity( &derivation,
+                                            PSA_TLS12_ECJPAKE_TO_PMS_DATA_SIZE );
+            if( status != PSA_SUCCESS )
+            {
+                psa_key_derivation_abort( &derivation );
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+
+            status = psa_pake_get_implicit_key( &handshake->psa_pake_ctx,
+                                                &derivation );
+            if( status != PSA_SUCCESS )
+            {
+                psa_key_derivation_abort( &derivation );
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+
+            status = psa_key_derivation_output_bytes( &derivation,
+                                                      handshake->premaster,
+                                                      handshake->pmslen );
+            if( status != PSA_SUCCESS )
+            {
+                psa_key_derivation_abort( &derivation );
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+
+            status = psa_key_derivation_abort( &derivation );
+            if( status != PSA_SUCCESS )
+            {
+                return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
+            }
+        }
+#endif
         ret = handshake->tls_prf( handshake->premaster, handshake->pmslen,
                                   lbl, seed, seed_len,
                                   master,
@@ -8306,6 +8435,99 @@
     return( ret );
 }
 
+#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && \
+    defined(MBEDTLS_USE_PSA_CRYPTO)
+int mbedtls_psa_ecjpake_read_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    const unsigned char *buf,
+                                    size_t len, mbedtls_ecjpake_rounds_t round )
+{
+    psa_status_t status;
+    size_t input_offset = 0;
+    /*
+     * At round one repeat the KEY_SHARE, ZK_PUBLIC & ZF_PROOF twice
+     * At round two perform a single cycle
+     */
+    unsigned int remaining_steps = ( round == MBEDTLS_ECJPAKE_ROUND_ONE) ? 2 : 1;
+
+    for( ; remaining_steps > 0; remaining_steps-- )
+    {
+        for( psa_pake_step_t step = PSA_PAKE_STEP_KEY_SHARE;
+             step <= PSA_PAKE_STEP_ZK_PROOF;
+             ++step )
+        {
+            /* Length is stored at the first byte */
+            size_t length = buf[input_offset];
+            input_offset += 1;
+
+            if( input_offset + length > len )
+            {
+                return MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE;
+            }
+
+            status = psa_pake_input( pake_ctx, step,
+                                     buf + input_offset, length );
+            if( status != PSA_SUCCESS)
+            {
+                return psa_ssl_status_to_mbedtls( status );
+            }
+
+            input_offset += length;
+        }
+    }
+
+    if( input_offset != len )
+        return MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE;
+
+    return( 0 );
+}
+
+int mbedtls_psa_ecjpake_write_round(
+                                    psa_pake_operation_t *pake_ctx,
+                                    unsigned char *buf,
+                                    size_t len, size_t *olen,
+                                    mbedtls_ecjpake_rounds_t round )
+{
+    psa_status_t status;
+    size_t output_offset = 0;
+    size_t output_len;
+    /*
+     * At round one repeat the KEY_SHARE, ZK_PUBLIC & ZF_PROOF twice
+     * At round two perform a single cycle
+     */
+    unsigned int remaining_steps = ( round == MBEDTLS_ECJPAKE_ROUND_ONE) ? 2 : 1;
+
+    for( ; remaining_steps > 0; remaining_steps-- )
+    {
+        for( psa_pake_step_t step = PSA_PAKE_STEP_KEY_SHARE;
+            step <= PSA_PAKE_STEP_ZK_PROOF;
+            ++step )
+        {
+            /*
+             * For each step, prepend 1 byte with the length of the data as
+             * given by psa_pake_output().
+             */
+            status = psa_pake_output( pake_ctx, step,
+                                        buf + output_offset + 1,
+                                        len - output_offset - 1,
+                                        &output_len );
+            if( status != PSA_SUCCESS )
+            {
+                return( psa_ssl_status_to_mbedtls( status ) );
+            }
+
+            *(buf + output_offset) = (uint8_t) output_len;
+
+            output_offset += output_len + 1;
+        }
+    }
+
+    *olen = output_offset;
+
+    return( 0 );
+}
+#endif //MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED && MBEDTLS_USE_PSA_CRYPTO
+
 #if defined(MBEDTLS_USE_PSA_CRYPTO)
 int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
                                             unsigned char *hash, size_t *hashlen,
@@ -8864,8 +9086,13 @@
 
 #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && defined(MBEDTLS_SSL_CLI_C)
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( suite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE &&
+        ssl->handshake->psa_pake_ctx_is_ok != 1 )
+#else
     if( suite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE &&
         mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     {
         return( -1 );
     }
diff --git a/library/ssl_tls12_client.c b/library/ssl_tls12_client.c
index 21b3ba6..79c884b 100644
--- a/library/ssl_tls12_client.c
+++ b/library/ssl_tls12_client.c
@@ -132,13 +132,18 @@
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
     unsigned char *p = buf;
-    size_t kkpp_len;
+    size_t kkpp_len = 0;
 
     *olen = 0;
 
     /* Skip costly extension if we can't use EC J-PAKE anyway */
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ssl->handshake->psa_pake_ctx_is_ok != 1 )
+        return( 0 );
+#else
     if( mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
         return( 0 );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
     MBEDTLS_SSL_DEBUG_MSG( 3,
         ( "client hello, adding ecjpake_kkpp extension" ) );
@@ -158,6 +163,18 @@
     {
         MBEDTLS_SSL_DEBUG_MSG( 3, ( "generating new ecjpake parameters" ) );
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        ret = mbedtls_psa_ecjpake_write_round(&ssl->handshake->psa_pake_ctx,
+                                                p + 2, end - p - 2, &kkpp_len,
+                                                MBEDTLS_ECJPAKE_ROUND_ONE );
+        if ( ret != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+            MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+            return( ret );
+        }
+#else
         ret = mbedtls_ecjpake_write_round_one( &ssl->handshake->ecjpake_ctx,
                                                p + 2, end - p - 2, &kkpp_len,
                                                ssl->conf->f_rng, ssl->conf->p_rng );
@@ -167,6 +184,7 @@
                 "mbedtls_ecjpake_write_round_one", ret );
             return( ret );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
         ssl->handshake->ecjpake_cache = mbedtls_calloc( 1, kkpp_len );
         if( ssl->handshake->ecjpake_cache == NULL )
@@ -849,10 +867,11 @@
             ssl->handshake->ecdh_ctx.point_format = p[0];
 #endif /* !MBEDTLS_USE_PSA_CRYPTO &&
           ( MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ) */
-#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if !defined(MBEDTLS_USE_PSA_CRYPTO) &&                             \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
             mbedtls_ecjpake_set_point_format( &ssl->handshake->ecjpake_ctx,
                                               p[0] );
-#endif
+#endif /* !MBEDTLS_USE_PSA_CRYPTO && MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
             MBEDTLS_SSL_DEBUG_MSG( 4, ( "point format selected: %d", p[0] ) );
             return( 0 );
         }
@@ -889,6 +908,24 @@
     ssl->handshake->ecjpake_cache = NULL;
     ssl->handshake->ecjpake_cache_len = 0;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ( ret = mbedtls_psa_ecjpake_read_round(
+                            &ssl->handshake->psa_pake_ctx, buf, len,
+                            MBEDTLS_ECJPAKE_ROUND_ONE ) ) != 0 )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+        MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round one", ret );
+        mbedtls_ssl_send_alert_message(
+                ssl,
+                MBEDTLS_SSL_ALERT_LEVEL_FATAL,
+                MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
+        return( ret );
+    }
+
+    return( 0 );
+#else
     if( ( ret = mbedtls_ecjpake_read_round_one( &ssl->handshake->ecjpake_ctx,
                                                 buf, len ) ) != 0 )
     {
@@ -901,6 +938,7 @@
     }
 
     return( 0 );
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 }
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
@@ -2296,6 +2334,47 @@
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        /*
+         * The first 3 bytes are:
+         * [0] MBEDTLS_ECP_TLS_NAMED_CURVE
+         * [1, 2] elliptic curve's TLS ID
+         *
+         * However since we only support secp256r1 for now, we check only
+         * that TLS ID here
+         */
+        uint16_t read_tls_id = MBEDTLS_GET_UINT16_BE( p, 1 );
+        const mbedtls_ecp_curve_info *curve_info;
+
+        if( ( curve_info = mbedtls_ecp_curve_info_from_grp_id(
+                                MBEDTLS_ECP_DP_SECP256R1 ) ) == NULL )
+        {
+            return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+        }
+
+        if( ( *p != MBEDTLS_ECP_TLS_NAMED_CURVE ) ||
+            ( read_tls_id != curve_info->tls_id ) )
+        {
+            return( MBEDTLS_ERR_SSL_ILLEGAL_PARAMETER );
+        }
+
+        p += 3;
+
+        if( ( ret = mbedtls_psa_ecjpake_read_round(
+                        &ssl->handshake->psa_pake_ctx, p, end - p,
+                        MBEDTLS_ECJPAKE_ROUND_TWO ) ) != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+            MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round two", ret );
+            mbedtls_ssl_send_alert_message(
+                ssl,
+                MBEDTLS_SSL_ALERT_LEVEL_FATAL,
+                MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
+            return( MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE );
+        }
+#else
         ret = mbedtls_ecjpake_read_round_two( &ssl->handshake->ecjpake_ctx,
                                               p, end - p );
         if( ret != 0 )
@@ -2307,6 +2386,7 @@
                 MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
             return( MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
@@ -3227,6 +3307,21 @@
     {
         header_len = 4;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        unsigned char *out_p = ssl->out_msg + header_len;
+        unsigned char *end_p = ssl->out_msg + MBEDTLS_SSL_OUT_CONTENT_LEN -
+                               header_len;
+        ret = mbedtls_psa_ecjpake_write_round( &ssl->handshake->psa_pake_ctx,
+                                    out_p, end_p - out_p, &content_len,
+                                    MBEDTLS_ECJPAKE_ROUND_TWO );
+        if ( ret != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+            MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+            return( ret );
+        }
+#else
         ret = mbedtls_ecjpake_write_round_two( &ssl->handshake->ecjpake_ctx,
                 ssl->out_msg + header_len,
                 MBEDTLS_SSL_OUT_CONTENT_LEN - header_len,
@@ -3246,6 +3341,7 @@
             MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_derive_secret", ret );
             return( ret );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_RSA_ENABLED */
diff --git a/library/ssl_tls12_server.c b/library/ssl_tls12_server.c
index 3dab246..8aa89c6 100644
--- a/library/ssl_tls12_server.c
+++ b/library/ssl_tls12_server.c
@@ -268,10 +268,11 @@
             ssl->handshake->ecdh_ctx.point_format = p[0];
 #endif /* !MBEDTLS_USE_PSA_CRYPTO &&
           ( MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ) */
-#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
+#if !defined(MBEDTLS_USE_PSA_CRYPTO) &&                             \
+    defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
             mbedtls_ecjpake_set_point_format( &ssl->handshake->ecjpake_ctx,
                                               p[0] );
-#endif
+#endif /* !MBEDTLS_USE_PSA_CRYPTO && MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
             MBEDTLS_SSL_DEBUG_MSG( 4, ( "point format selected: %d", p[0] ) );
             return( 0 );
         }
@@ -289,16 +290,37 @@
 MBEDTLS_CHECK_RETURN_CRITICAL
 static int ssl_parse_ecjpake_kkpp( mbedtls_ssl_context *ssl,
                                    const unsigned char *buf,
-                                   size_t len )
+                                   size_t len)
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ssl->handshake->psa_pake_ctx_is_ok != 1 )
+#else
     if( mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     {
         MBEDTLS_SSL_DEBUG_MSG( 3, ( "skip ecjpake kkpp extension" ) );
         return( 0 );
     }
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    if( ( ret = mbedtls_psa_ecjpake_read_round(
+                        &ssl->handshake->psa_pake_ctx, buf, len,
+                        MBEDTLS_ECJPAKE_ROUND_ONE ) ) != 0 )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+        MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round one", ret );
+        mbedtls_ssl_send_alert_message(
+                ssl,
+                MBEDTLS_SSL_ALERT_LEVEL_FATAL,
+                MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
+
+        return( ret );
+    }
+#else
     if( ( ret = mbedtls_ecjpake_read_round_one( &ssl->handshake->ecjpake_ctx,
                                                 buf, len ) ) != 0 )
     {
@@ -307,6 +329,7 @@
                                         MBEDTLS_SSL_ALERT_MSG_ILLEGAL_PARAMETER );
         return( ret );
     }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
     /* Only mark the extension as OK when we're sure it is */
     ssl->handshake->cli_exts |= MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK;
@@ -1996,6 +2019,18 @@
     MBEDTLS_PUT_UINT16_BE( MBEDTLS_TLS_EXT_ECJPAKE_KKPP, p, 0 );
     p += 2;
 
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+    ret = mbedtls_psa_ecjpake_write_round( &ssl->handshake->psa_pake_ctx,
+                                p + 2, end - p - 2, &kkpp_len,
+                                MBEDTLS_ECJPAKE_ROUND_ONE );
+    if ( ret != 0 )
+    {
+        psa_destroy_key( ssl->handshake->psa_pake_password );
+        psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+        MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+        return;
+    }
+#else
     ret = mbedtls_ecjpake_write_round_one( &ssl->handshake->ecjpake_ctx,
                                         p + 2, end - p - 2, &kkpp_len,
                                         ssl->conf->f_rng, ssl->conf->p_rng );
@@ -2004,6 +2039,7 @@
         MBEDTLS_SSL_DEBUG_RET( 1 , "mbedtls_ecjpake_write_round_one", ret );
         return;
     }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
 
     MBEDTLS_PUT_UINT16_BE( kkpp_len, p, 0 );
     p += 2;
@@ -2813,6 +2849,46 @@
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
         int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        unsigned char *out_p = ssl->out_msg + ssl->out_msglen;
+        unsigned char *end_p = ssl->out_msg + MBEDTLS_SSL_OUT_CONTENT_LEN -
+                               ssl->out_msglen;
+        size_t output_offset = 0;
+        size_t output_len = 0;
+        const mbedtls_ecp_curve_info *curve_info;
+
+        /*
+         * The first 3 bytes are:
+         * [0] MBEDTLS_ECP_TLS_NAMED_CURVE
+         * [1, 2] elliptic curve's TLS ID
+         *
+         * However since we only support secp256r1 for now, we hardcode its
+         * TLS ID here
+         */
+        if( ( curve_info = mbedtls_ecp_curve_info_from_grp_id(
+                                    MBEDTLS_ECP_DP_SECP256R1 ) ) == NULL )
+        {
+            return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
+        }
+        *out_p = MBEDTLS_ECP_TLS_NAMED_CURVE;
+        MBEDTLS_PUT_UINT16_BE( curve_info->tls_id, out_p, 1 );
+        output_offset += 3;
+
+        ret = mbedtls_psa_ecjpake_write_round( &ssl->handshake->psa_pake_ctx,
+                                    out_p + output_offset,
+                                    end_p - out_p - output_offset, &output_len,
+                                    MBEDTLS_ECJPAKE_ROUND_TWO );
+        if( ret != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+            MBEDTLS_SSL_DEBUG_RET( 1 , "psa_pake_output", ret );
+            return( ret );
+        }
+
+        output_offset += output_len;
+        ssl->out_msglen += output_offset;
+#else
         size_t len = 0;
 
         ret = mbedtls_ecjpake_write_round_two(
@@ -2827,6 +2903,7 @@
         }
 
         ssl->out_msglen += len;
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
@@ -4044,6 +4121,18 @@
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
     if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE )
     {
+#if defined(MBEDTLS_USE_PSA_CRYPTO)
+        if( ( ret = mbedtls_psa_ecjpake_read_round(
+                        &ssl->handshake->psa_pake_ctx, p, end - p,
+                        MBEDTLS_ECJPAKE_ROUND_TWO ) ) != 0 )
+        {
+            psa_destroy_key( ssl->handshake->psa_pake_password );
+            psa_pake_abort( &ssl->handshake->psa_pake_ctx );
+
+            MBEDTLS_SSL_DEBUG_RET( 1, "psa_pake_input round two", ret );
+            return( ret );
+        }
+#else
         ret = mbedtls_ecjpake_read_round_two( &ssl->handshake->ecjpake_ctx,
                                               p, end - p );
         if( ret != 0 )
@@ -4060,6 +4149,7 @@
             MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecjpake_derive_secret", ret );
             return( ret );
         }
+#endif /* MBEDTLS_USE_PSA_CRYPTO */
     }
     else
 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 3a69fd7..4fcb8bc 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -1437,6 +1437,31 @@
     tests/ssl-opt.sh -f "TLS 1.2"
 }
 
+# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
+# that we could use for interop testing. However, we now have sort of two
+# implementations ourselves: one using PSA, the other not. At least test that
+# these two interoperate with each other.
+component_test_tls1_2_ecjpake_compatibility() {
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
+    scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    cp programs/ssl/ssl_server2 s2_no_use_psa
+    cp programs/ssl/ssl_client2 c2_no_use_psa
+
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    make clean
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    make -C programs test/udp_proxy test/query_compile_time_config
+
+    msg "test: server w/o USE_PSA - client w/ USE_PSA"
+    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f ECJPAKE
+    msg "test: client w/o USE_PSA - server w/ USE_PSA"
+    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f ECJPAKE
+
+    rm s2_no_use_psa c2_no_use_psa
+}
+
 component_test_psa_external_rng_use_psa_crypto () {
     msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
     scripts/config.py full