Merge pull request #5549 from AndrzejKurek/doxygen-bad-param-names
Fix wrong doxygen parameter names and misused `\p` commands
diff --git a/include/mbedtls/aria.h b/include/mbedtls/aria.h
index 587cbf8..7e55df7 100644
--- a/include/mbedtls/aria.h
+++ b/include/mbedtls/aria.h
@@ -259,10 +259,6 @@
* \brief This function performs an ARIA-CTR encryption or decryption
* operation.
*
- * This function performs the operation defined in the \p mode
- * parameter (encrypt/decrypt), on the input data buffer
- * defined in the \p input parameter.
- *
* Due to the nature of CTR, you must use the same key schedule
* for both encryption and decryption operations. Therefore, you
* must use the context initialized with mbedtls_aria_setkey_enc()
diff --git a/include/mbedtls/asn1.h b/include/mbedtls/asn1.h
index e15aeb3..002c8de 100644
--- a/include/mbedtls/asn1.h
+++ b/include/mbedtls/asn1.h
@@ -474,7 +474,7 @@
* on a successful invocation.
* \param end The end of the ASN.1 SEQUENCE container.
* \param tag_must_mask A mask to be applied to the ASN.1 tags found within
- * the SEQUENCE before comparing to \p tag_must_value.
+ * the SEQUENCE before comparing to \p tag_must_val.
* \param tag_must_val The required value of each ASN.1 tag found in the
* SEQUENCE, after masking with \p tag_must_mask.
* Mismatching tags lead to an error.
@@ -483,7 +483,7 @@
* while a value of \c 0xFF for \p tag_must_mask means
* that \p tag_must_val is the only allowed tag.
* \param tag_may_mask A mask to be applied to the ASN.1 tags found within
- * the SEQUENCE before comparing to \p tag_may_value.
+ * the SEQUENCE before comparing to \p tag_may_val.
* \param tag_may_val The desired value of each ASN.1 tag found in the
* SEQUENCE, after masking with \p tag_may_mask.
* Mismatching tags will be silently ignored.
diff --git a/include/mbedtls/bignum.h b/include/mbedtls/bignum.h
index 2a50b40..3ba1777 100644
--- a/include/mbedtls/bignum.h
+++ b/include/mbedtls/bignum.h
@@ -544,7 +544,7 @@
* \param X The destination MPI. This must point to an initialized MPI.
* \param buf The input buffer. This must be a readable buffer of length
* \p buflen Bytes.
- * \param buflen The length of the input buffer \p p in Bytes.
+ * \param buflen The length of the input buffer \p buf in Bytes.
*
* \return \c 0 if successful.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed.
@@ -559,7 +559,7 @@
* \param X The destination MPI. This must point to an initialized MPI.
* \param buf The input buffer. This must be a readable buffer of length
* \p buflen Bytes.
- * \param buflen The length of the input buffer \p p in Bytes.
+ * \param buflen The length of the input buffer \p buf in Bytes.
*
* \return \c 0 if successful.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed.
@@ -999,8 +999,8 @@
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed.
* \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p N is less than
* or equal to one.
- * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p has no modular inverse
- * with respect to \p N.
+ * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p A has no modular
+ * inverse with respect to \p N.
*/
int mbedtls_mpi_inv_mod(mbedtls_mpi *X, const mbedtls_mpi *A,
const mbedtls_mpi *N);
diff --git a/include/mbedtls/camellia.h b/include/mbedtls/camellia.h
index f4aa002..8033c13 100644
--- a/include/mbedtls/camellia.h
+++ b/include/mbedtls/camellia.h
@@ -220,7 +220,7 @@
* *note Due to the nature of CTR mode, you should use the same
* key for both encryption and decryption. In particular, calls
* to this function should be preceded by a key-schedule via
- * mbedtls_camellia_setkey_enc() regardless of whether \p mode
+ * mbedtls_camellia_setkey_enc() regardless of whether the mode
* is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \warning You must never reuse a nonce value with the same key. Doing so
diff --git a/include/mbedtls/cipher.h b/include/mbedtls/cipher.h
index 03e2327..53ef2ad 100644
--- a/include/mbedtls/cipher.h
+++ b/include/mbedtls/cipher.h
@@ -505,7 +505,7 @@
*
* \return The cipher name, which is a human readable string,
* with static storage duration.
- * \return \c NULL if \c info is \p NULL.
+ * \return \c NULL if \p info is \c NULL.
*/
static inline const char *mbedtls_cipher_info_get_name(
const mbedtls_cipher_info_t *info)
@@ -596,7 +596,7 @@
}
/**
- * \brief This function initializes a \p cipher_context as NONE.
+ * \brief This function initializes a \p ctx as NONE.
*
* \param ctx The context to be initialized. This must not be \c NULL.
*/
@@ -790,7 +790,7 @@
* \param ctx The context of the cipher. This must be initialized.
*
* \return The key length of the cipher in bits.
- * \return #MBEDTLS_KEY_LENGTH_NONE if ctx \p has not been
+ * \return #MBEDTLS_KEY_LENGTH_NONE if \p ctx has not been
* initialized.
*/
static inline int mbedtls_cipher_get_key_bitlen(
@@ -990,7 +990,7 @@
* \param ctx The generic cipher context. This must be initialized and
* bound to a key.
* \param output The buffer to write data to. This needs to be a writable
- * buffer of at least \p block_size Bytes.
+ * buffer of at least block_size Bytes.
* \param olen The length of the data written to the \p output buffer.
* This may not be \c NULL.
*
diff --git a/include/mbedtls/dhm.h b/include/mbedtls/dhm.h
index 6ffe681..0232a71 100644
--- a/include/mbedtls/dhm.h
+++ b/include/mbedtls/dhm.h
@@ -325,7 +325,7 @@
* initialized.
*
* \return \c 0 on success.
- * \return #MBEDTLS_ERR_DHM_BAD_INPUT_DATA if \p field is invalid.
+ * \return #MBEDTLS_ERR_DHM_BAD_INPUT_DATA if \p param is invalid.
* \return An \c MBEDTLS_ERR_MPI_XXX error code if the copy fails.
*/
int mbedtls_dhm_get_value(const mbedtls_dhm_context *ctx,
diff --git a/include/mbedtls/ecdsa.h b/include/mbedtls/ecdsa.h
index e797c1a..3b2b418 100644
--- a/include/mbedtls/ecdsa.h
+++ b/include/mbedtls/ecdsa.h
@@ -207,8 +207,9 @@
* \param md_alg The hash algorithm used to hash the original data.
* \param f_rng_blind The RNG function used for blinding. This must not be
* \c NULL.
- * \param p_rng_blind The RNG context to be passed to \p f_rng. This may be
- * \c NULL if \p f_rng doesn't need a context parameter.
+ * \param p_rng_blind The RNG context to be passed to \p f_rng_blind. This
+ * may be \c NULL if \p f_rng_blind doesn't need a context
+ * parameter.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
@@ -326,8 +327,8 @@
* \param md_alg The hash algorithm used to hash the original data.
* \param f_rng_blind The RNG function used for blinding. This must not be
* \c NULL.
- * \param p_rng_blind The RNG context to be passed to \p f_rng. This may be
- * \c NULL if \p f_rng doesn't need a context parameter.
+ * \param p_rng_blind The RNG context to be passed to \p f_rng_blind. This may be
+ * \c NULL if \p f_rng_blind doesn't need a context parameter.
* \param rs_ctx The restart context to use. This may be \c NULL
* to disable restarting. If it is not \c NULL, it
* must point to an initialized restart context.
@@ -459,7 +460,7 @@
* via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
* \param md_alg The message digest that was used to hash the message.
* \param hash The message hash to be signed. This must be a readable
- * buffer of length \p blen Bytes.
+ * buffer of length \p hlen Bytes.
* \param hlen The length of the hash \p hash in Bytes.
* \param sig The buffer to which to write the signature. This must be a
* writable buffer of length at least twice as large as the
@@ -502,7 +503,7 @@
* via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
* \param md_alg The message digest that was used to hash the message.
* \param hash The message hash to be signed. This must be a readable
- * buffer of length \p blen Bytes.
+ * buffer of length \p hlen Bytes.
* \param hlen The length of the hash \p hash in Bytes.
* \param sig The buffer to which to write the signature. This must be a
* writable buffer of length at least twice as large as the
@@ -549,7 +550,7 @@
* \param ctx The ECDSA context to use. This must be initialized
* and have a group and public key bound to it.
* \param hash The message hash that was signed. This must be a readable
- * buffer of length \p size Bytes.
+ * buffer of length \p hlen Bytes.
* \param hlen The size of the hash \p hash.
* \param sig The signature to read and verify. This must be a readable
* buffer of length \p slen Bytes.
@@ -579,7 +580,7 @@
* \param ctx The ECDSA context to use. This must be initialized
* and have a group and public key bound to it.
* \param hash The message hash that was signed. This must be a readable
- * buffer of length \p size Bytes.
+ * buffer of length \p hlen Bytes.
* \param hlen The size of the hash \p hash.
* \param sig The signature to read and verify. This must be a readable
* buffer of length \p slen Bytes.
diff --git a/include/mbedtls/ecp.h b/include/mbedtls/ecp.h
index fc42838..0e678a3 100644
--- a/include/mbedtls/ecp.h
+++ b/include/mbedtls/ecp.h
@@ -1083,7 +1083,7 @@
*
* It only checks that the point is non-zero, has
* valid coordinates and lies on the curve. It does not verify
- * that it is indeed a multiple of \p G. This additional
+ * that it is indeed a multiple of \c G. This additional
* check is computationally more expensive, is not required
* by standards, and should not be necessary if the group
* used has a small cofactor. In particular, it is useless for
@@ -1108,7 +1108,7 @@
const mbedtls_ecp_point *pt);
/**
- * \brief This function checks that an \p mbedtls_mpi is a
+ * \brief This function checks that an \c mbedtls_mpi is a
* valid private key for this curve.
*
* \note This function uses bare components rather than an
diff --git a/include/mbedtls/hmac_drbg.h b/include/mbedtls/hmac_drbg.h
index 4ca6b08..2e5aa6d 100644
--- a/include/mbedtls/hmac_drbg.h
+++ b/include/mbedtls/hmac_drbg.h
@@ -183,8 +183,8 @@
* \param len The length of the personalization string.
* This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT
* and also at most
- * #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \p entropy_len * 3 / 2
- * where \p entropy_len is the entropy length
+ * #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \c entropy_len * 3 / 2
+ * where \c entropy_len is the entropy length
* described above.
*
* \return \c 0 if successful.
@@ -313,8 +313,8 @@
* \param len The length of the additional data.
* This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT
* and also at most
- * #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \p entropy_len
- * where \p entropy_len is the entropy length
+ * #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \c entropy_len
+ * where \c entropy_len is the entropy length
* (see mbedtls_hmac_drbg_set_entropy_len()).
*
* \return \c 0 if successful.
diff --git a/include/mbedtls/mbedtls_config.h b/include/mbedtls/mbedtls_config.h
index fbf464d..30e4d13 100644
--- a/include/mbedtls/mbedtls_config.h
+++ b/include/mbedtls/mbedtls_config.h
@@ -1283,8 +1283,8 @@
* );
* ```
* The \c context value is initialized to 0 before the first call.
- * The function must fill the \c output buffer with \p output_size bytes
- * of random data and set \c *output_length to \p output_size.
+ * The function must fill the \c output buffer with \c output_size bytes
+ * of random data and set \c *output_length to \c output_size.
*
* Requires: MBEDTLS_PSA_CRYPTO_C
*
diff --git a/include/mbedtls/pk.h b/include/mbedtls/pk.h
index cdd3882..b5d12cf 100644
--- a/include/mbedtls/pk.h
+++ b/include/mbedtls/pk.h
@@ -552,7 +552,7 @@
*
* \return 0 on success (signature is valid),
* #MBEDTLS_ERR_PK_SIG_LEN_MISMATCH if there is a valid
- * signature in sig but its length is less than \p siglen,
+ * signature in \p sig but its length is less than \p sig_len,
* or a specific error code.
*
* \note For RSA keys, the default padding type is PKCS#1 v1.5.
@@ -606,7 +606,7 @@
* #MBEDTLS_ERR_PK_TYPE_MISMATCH if the PK context can't be
* used for this type of signatures,
* #MBEDTLS_ERR_PK_SIG_LEN_MISMATCH if there is a valid
- * signature in sig but its length is less than \p siglen,
+ * signature in \p sig but its length is less than \p sig_len,
* or a specific error code.
*
* \note If hash_len is 0, then the length associated with md_alg
diff --git a/include/mbedtls/rsa.h b/include/mbedtls/rsa.h
index da8639b..3d57aa2 100644
--- a/include/mbedtls/rsa.h
+++ b/include/mbedtls/rsa.h
@@ -282,15 +282,15 @@
* \brief This function completes an RSA context from
* a set of imported core parameters.
*
- * To setup an RSA public key, precisely \p N and \p E
+ * To setup an RSA public key, precisely \c N and \c E
* must have been imported.
*
* To setup an RSA private key, sufficient information must
* be present for the other parameters to be derivable.
*
* The default implementation supports the following:
- * <ul><li>Derive \p P, \p Q from \p N, \p D, \p E.</li>
- * <li>Derive \p N, \p D from \p P, \p Q, \p E.</li></ul>
+ * <ul><li>Derive \c P, \c Q from \c N, \c D, \c E.</li>
+ * <li>Derive \c N, \c D from \c P, \c Q, \c E.</li></ul>
* Alternative implementations need not support these.
*
* If this function runs successfully, it guarantees that
@@ -547,7 +547,7 @@
* \note This function does not handle message padding.
*
* \note Make sure to set \p input[0] = 0 or ensure that
- * input is smaller than \p N.
+ * input is smaller than \c N.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -984,8 +984,8 @@
* verification.
*
* \note For PKCS#1 v2.1 encoding, see comments on
- * mbedtls_rsa_rsassa_pss_verify() about \p md_alg and
- * \p hash_id.
+ * mbedtls_rsa_rsassa_pss_verify() about \c md_alg and
+ * \c hash_id.
*
* \param ctx The initialized RSA public key context to use.
* \param md_alg The message-digest algorithm used to hash the original data.
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index 59abee2..e4d817f 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -2170,10 +2170,10 @@
* \param own_cid The address of the readable buffer holding the CID we want
* the peer to use when sending encrypted messages to us.
* This may be \c NULL if \p own_cid_len is \c 0.
- * This parameter is unused if \p enabled is set to
+ * This parameter is unused if \p enable is set to
* MBEDTLS_SSL_CID_DISABLED.
* \param own_cid_len The length of \p own_cid.
- * This parameter is unused if \p enabled is set to
+ * This parameter is unused if \p enable is set to
* MBEDTLS_SSL_CID_DISABLED.
*
* \note The value of \p own_cid_len must match the value of the
@@ -3124,8 +3124,8 @@
*
* \param session The session structure to be saved.
* \param buf The buffer to write the serialized data to. It must be a
- * writeable buffer of at least \p len bytes, or may be \c
- * NULL if \p len is \c 0.
+ * writeable buffer of at least \p buf_len bytes, or may be \c
+ * NULL if \p buf_len is \c 0.
* \param buf_len The number of bytes available for writing in \p buf.
* \param olen The size in bytes of the data that has been or would have
* been written. It must point to a valid \c size_t.
@@ -3266,7 +3266,7 @@
* record headers.
*
* \return \c 0 on success.
- * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if \p own_cid_len
+ * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if \p len
* is too large.
*/
int mbedtls_ssl_conf_cid(mbedtls_ssl_config *conf, size_t len,
@@ -3810,8 +3810,8 @@
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
/**
* \brief Retrieve SNI extension value for the current handshake.
- * Available in \p f_cert_cb of \c mbedtls_ssl_conf_cert_cb(),
- * this is the same value passed to \p f_sni callback of
+ * Available in \c f_cert_cb of \c mbedtls_ssl_conf_cert_cb(),
+ * this is the same value passed to \c f_sni callback of
* \c mbedtls_ssl_conf_sni() and may be used instead of
* \c mbedtls_ssl_conf_sni().
*
@@ -3820,10 +3820,10 @@
* 0 if SNI extension is not present or not yet processed.
*
* \return const pointer to SNI extension value.
- * - value is valid only when called in \p f_cert_cb
+ * - value is valid only when called in \c f_cert_cb
* registered with \c mbedtls_ssl_conf_cert_cb().
* - value is NULL if SNI extension is not present.
- * - value is not '\0'-terminated. Use \c name_len for len.
+ * - value is not '\0'-terminated. Use \c name_len for len.
* - value must not be freed.
*/
const unsigned char *mbedtls_ssl_get_hs_sni(mbedtls_ssl_context *ssl,
@@ -4116,7 +4116,7 @@
* negotiated.
*
* \param conf SSL configuration
- * \param tls_version TLS protocol version number (\p mbedtls_ssl_protocol_version)
+ * \param tls_version TLS protocol version number (\c mbedtls_ssl_protocol_version)
* (#MBEDTLS_SSL_VERSION_UNKNOWN is not valid)
*/
static inline void mbedtls_ssl_conf_max_tls_version(mbedtls_ssl_config *conf,
@@ -4173,7 +4173,7 @@
* negotiated.
*
* \param conf SSL configuration
- * \param tls_version TLS protocol version number (\p mbedtls_ssl_protocol_version)
+ * \param tls_version TLS protocol version number (\c mbedtls_ssl_protocol_version)
* (#MBEDTLS_SSL_VERSION_UNKNOWN is not valid)
*/
static inline void mbedtls_ssl_conf_min_tls_version(mbedtls_ssl_config *conf,
diff --git a/include/mbedtls/ssl_cache.h b/include/mbedtls/ssl_cache.h
index b1b4250..7a90191 100644
--- a/include/mbedtls/ssl_cache.h
+++ b/include/mbedtls/ssl_cache.h
@@ -137,7 +137,7 @@
*
* \param data The SSL cache context to use.
* \param session_id The pointer to the buffer holding the session ID
- * associated to \p session.
+ * associated to session.
* \param session_id_len The length of \p session_id in bytes.
*
* \return \c 0 on success. This indicates the cache entry for
diff --git a/include/mbedtls/x509.h b/include/mbedtls/x509.h
index 7c9a761..6e1f5b6 100644
--- a/include/mbedtls/x509.h
+++ b/include/mbedtls/x509.h
@@ -429,7 +429,7 @@
* \param san_buf The buffer holding the raw data item of the subject
* alternative name.
* \param san The target structure to populate with the parsed presentation
- * of the subject alternative name encoded in \p san_raw.
+ * of the subject alternative name encoded in \p san_buf.
*
* \note Supported GeneralName types, as defined in RFC 5280:
* "rfc822Name", "dnsName", "directoryName",
@@ -439,7 +439,7 @@
* \note This function should be called on a single raw data of
* subject alternative name. For example, after successful
* certificate parsing, one must iterate on every item in the
- * \p crt->subject_alt_names sequence, and pass it to
+ * \c crt->subject_alt_names sequence, and pass it to
* this function.
*
* \warning The target structure contains pointers to the raw data of the
diff --git a/include/psa/crypto.h b/include/psa/crypto.h
index 8a05efd..6b06187 100644
--- a/include/psa/crypto.h
+++ b/include/psa/crypto.h
@@ -4407,9 +4407,9 @@
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p signature buffer is too small. You can
* determine a sufficient buffer size by calling
- * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
+ * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \c alg)
* where \c key_type and \c key_bits are the type and bit-size
- * respectively of \p key.
+ * respectively of \c key.
*
* \retval #PSA_ERROR_BAD_STATE
* An operation was not previously started on this context via
diff --git a/include/psa/crypto_extra.h b/include/psa/crypto_extra.h
index 94def5c..4b0cc70 100644
--- a/include/psa/crypto_extra.h
+++ b/include/psa/crypto_extra.h
@@ -1036,12 +1036,12 @@
* (value of type ::psa_pake_primitive_type_t).
* \param pake_family The family of the primitive
* (the type and interpretation of this parameter depends
- * on \p type, for more information consult the
+ * on \p pake_type, for more information consult the
* documentation of individual ::psa_pake_primitive_type_t
* constants).
* \param pake_bits The bit-size of the primitive
* (Value of type \c size_t. The interpretation
- * of this parameter depends on \p family, for more
+ * of this parameter depends on \p pake_family, for more
* information consult the documentation of individual
* ::psa_pake_primitive_type_t constants).
*
@@ -1545,7 +1545,7 @@
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
- * \p user_id is not valid for the \p operation's algorithm and cipher
+ * \p peer_id is not valid for the \p operation's algorithm and cipher
* suite.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The algorithm doesn't associate a second identity with the session.
@@ -1627,8 +1627,8 @@
* \c PSA_PAKE_STEP_XXX constants for more
* information.
* \param output_size Size of the \p output buffer in bytes. This must
- * be at least #PSA_PAKE_OUTPUT_SIZE(\p alg, \p
- * primitive, \p step) where \p alg and
+ * be at least #PSA_PAKE_OUTPUT_SIZE(\c alg, \c
+ * primitive, \p output_step) where \c alg and
* \p primitive are the PAKE algorithm and primitive
* in the operation's cipher suite, and \p step is
* the output step.
@@ -1693,9 +1693,9 @@
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The verification fails for a #PSA_PAKE_STEP_ZK_PROOF input step.
* \retval #PSA_ERROR_INVALID_ARGUMENT
- * \p is not compatible with the \p operation’s algorithm, or the
- * \p input is not valid for the \p operation's algorithm, cipher suite
- * or \p step.
+ * \p input_length is not compatible with the \p operation’s algorithm,
+ * or the \p input is not valid for the \p operation's algorithm,
+ * cipher suite or \p step.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p step p is not supported with the \p operation's algorithm, or the
* \p input is not supported for the \p operation's algorithm, cipher
@@ -1744,7 +1744,7 @@
*
* When this function returns successfully, \p operation becomes inactive.
* If this function returns an error status, both \p operation
- * and \p key_derivation operations enter an error state and must be aborted by
+ * and \c key_derivation operations enter an error state and must be aborted by
* calling psa_pake_abort() and psa_key_derivation_abort() respectively.
*
* \param[in,out] operation Active PAKE operation.
@@ -1877,7 +1877,7 @@
* The value of this macro must be at least as large as the largest value
* returned by PSA_PAKE_OUTPUT_SIZE()
*
- * See also #PSA_PAKE_OUTPUT_SIZE(\p alg, \p primitive, \p step).
+ * See also #PSA_PAKE_OUTPUT_SIZE(\p alg, \p primitive, \p output_step).
*/
#define PSA_PAKE_OUTPUT_MAX_SIZE 65
@@ -1889,7 +1889,7 @@
* The value of this macro must be at least as large as the largest value
* returned by PSA_PAKE_INPUT_SIZE()
*
- * See also #PSA_PAKE_INPUT_SIZE(\p alg, \p primitive, \p step).
+ * See also #PSA_PAKE_INPUT_SIZE(\p alg, \p primitive, \p output_step).
*/
#define PSA_PAKE_INPUT_MAX_SIZE 65